+=== release 1.12.2 ===
+
+2017-07-14 Sebastian Dröge <slomo@coaxion.net>
+
+ * configure.ac:
+ releasing 1.12.2
+
+2017-07-14 13:22:45 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/el.po:
+ po: Update translations
+
+2017-07-13 12:47:02 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Fix parsing of RLE depth
+ Regression introduced by 86b427dc70562f891a551ffc9f96cefe1cafcddd
+ https://bugzilla.gnome.org/show_bug.cgi?id=784812
+
+2017-05-20 17:09:52 +0200 Josep Torra <jtorra@oblong.com>
+
+ * sys/osxaudio/gstosxcoreaudio.c:
+ osxaudio: fixes playback of mono streams with no channel-mask field in caps
+ Fixes a negotiation error seen when trying to playback of a .MOV file with
+ a mono AAC audio stream decoded by avcdec_aac that doesn't set channel-mask
+ field but sink was requiring channel-mask=0x3.
+
+2017-07-07 21:15:57 +0900 Yasushi SHOJI <yashi@atmark-techno.com>
+
+ * gst/rtp/gstrtpgsmpay.c:
+ rtpgsmpay: fix accidental garbage data before actual payload
+ Do not allocate payload size outbuf if appending payload buffer.
+ The commit 137672ff1824948bda4b1b1967de8c24a0055b67 attached payload
+ to the output buffer but forgot to remove payload allocation. That
+ effectively doubled payload size and add zero'ed or random bytes.
+ Makes the following pipeline work again:
+ gst-launch-1.0 -v audiotestsrc wave=2 ! gsmenc ! rtpgsmpay ! rtpgsmdepay ! gsmdec ! autoaudiosink
+ https://bugzilla.gnome.org/show_bug.cgi?id=784616
+
+2017-07-03 11:47:13 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxreceive.c:
+ rtprtxreceive: Add memory and boundary checks
+ This element was not checking if mapping the RTP buffer and the payload
+ worked, and was not checking if the RTX payload was large enough.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784484
+
+2017-07-03 20:27:29 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/imagefreeze/gstimagefreeze.c:
+ imagefreeze: fix use-after-free on seek event
+ Get seqnum before unreffing the seek event.
+ https://bugzilla.gnome.org/show_bug.cgi?id=784486
+
+2017-06-29 18:59:58 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Create send/recv mutexes once, not on every connect()
+ Also fixes a crash caused by freeing an uninitialized mutex in an error
+ case.
+ https://bugzilla.gnome.org//show_bug.cgi?id=784282
+
+2017-06-22 11:38:56 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Actually use the receive lock when receiving, not the send lock
+
+=== release 1.12.1 ===
+
+2017-06-20 12:06:22 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ * meson.build:
+ Release 1.12.1
+
+2017-06-20 11:20:12 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/fur.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
+
+2017-06-20 11:08:32 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/bg.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/fr.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/nb.po:
+ * po/pl.po:
+ * po/ru.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ po: Update translations
+
+2017-06-13 17:40:19 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * gst/multifile/gstsplitmuxsink.c:
+ splitmux: Drop allocation queries
+ They can cause us to deadlock, while we're waiting for a new frame and
+ upstream is waiting for the allocation query to be answered before
+ sending a frame
+ https://bugzilla.gnome.org/show_bug.cgi?id=783753
+
+2017-06-15 10:40:51 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ * gst/rtsp/gstrtspsrc.h:
+ rtspsrc: Use a mutex for protecting against concurrent send/receives
+ We currently send data to the RTSP connection from multiple threads:
+ whenever a command is to be handled and whenever RTCP is generated. This
+ can cause data corruption or worse if both happen at the same time.
+ As such, protect gst_rtsp_connection_send() and gst_rtsp_connection_receive()
+ calls with a mutex. While this means that we hold a mutex during the IO
+ operation, this is not actually a problem as the IO operation can be
+ interrupted (gst_rtsp_connection_flush()) at any time and is blocking by
+ itself anyway.
+
+2017-06-15 11:50:44 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ qtmux: Un-merge the last two stsc entries after serializing
+ The last entry will most likely get new samples added to it in "robust"
+ muxing mode, changing the samples_per_chunk and thus making it wrong to
+ keep the last two entries merged. It will run into an assertion later
+ when adding a new sample to the chunk.
+ Thanks to gdiener@cardinalpeak.com for the analysis of the bug and
+ proposal for a solution.
+
+2017-06-14 00:09:25 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/wavparse/gstwavparse.c:
+ wavparse: Actually clip to upstream size instead of size of the data chunk
+ There might be other chunks after the data chunk, so clipping the chunk
+ size with the data size can lead to a negative number and all following
+ calculations go wrong and cause crashes or worse.
+ This was introduced in 3ac119bbe2c360e28c087cf3852ea769d611b120.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783760
+
+2017-05-30 22:23:10 +0200 Juan Navarro <juan.navarro@gmx.es>
+
+ * gst/rtpmanager/rtpsession.c:
+ rtpsession: print value of unknown RTCP Payload Type
+ This adds printing the actual value of any unknown RTCP PT
+ to the already existing WARNING log message.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783248
+
+2017-06-02 11:30:15 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/rtp/gstrtph265depay.c:
+ rtph265depay: fix caps leak
+
+2017-05-24 11:33:05 +0530 vijay <vijay.palaniswamy@in.bosch.com>
+
+ * gst/audioparsers/gstaacparse.c:
+ aacparse : Fix, Caps were not set while reusing aacparse
+ While reusing aacparse caps were not set.This fix enables aacparse to reuse in same pipeline.
+ https://bugzilla.gnome.org/show_bug.cgi?id=783027
+
+2017-05-16 12:56:15 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Do not check timecode data for mp4 container
+ Timecode trak is only supported for mov right now, not for mp4. That
+ code would otherwise create an invalid trak if the muxed video contained
+ timecode metadata.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782684
+
+2017-05-10 15:58:41 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Lateness is in QT timescale, diff in GstClockTime
+ Print the right one in debug output to get meaningful numbers.
+
+2017-05-09 11:41:25 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/vpx/gstvpxdec.c:
+ vpxdec: Set fb->priv to NULL after freeing just in case
+ https://bugzilla.gnome.org/show_bug.cgi?id=782359
+
+2017-05-08 15:22:00 +0000 Dustin Spicuzza <dustin@virtualroadside.com>
+
+ * sys/directsound/gstdirectsoundsink.c:
+ * sys/directsound/gstdirectsoundsink.h:
+ directsoundsink: Use GstClock API instead of Sleep() for waiting
+ It's more accurate and allows cancellation.
+ https://bugzilla.gnome.org/show_bug.cgi?id=773681
+
+2017-05-08 15:05:45 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/vpx/gstvp9dec.c:
+ vpx: fix build against older libvpx versions
+ Such as 1.3.0 as on raspbian.
+
+2017-05-03 23:23:10 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * sys/directsound/gstdirectsoundsink.c:
+ directsoundsink: Fix corner case causing large CPU usage
+ We were unnecessarily looping/goto-ing repeatedly when we had exactly
+ the amount of data as the free space, and also when the free space was
+ too small. This, as it turns out, is a very common scenario with
+ Directsound on Windows.
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=773681
+ We have to do polling here because the event notification API that
+ Directsound exposes cannot be used with live playback since all events
+ must be registered in advance with the capture buffer, you cannot
+ add/remove them once playback has begun. Directsoundsrc had the same
+ problem.
+ See also: https://bugzilla.gnome.org/show_bug.cgi?id=781249
+
+=== release 1.12.0 ===
+
+2017-05-04 15:38:34 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ * meson.build:
+ Release 1.12.0
+
+2017-05-04 15:07:27 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/fur.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
+
+2017-05-04 13:47:20 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/el.po:
+ po: Update translations
+
+2017-05-02 10:32:30 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Fix crash on mss stream caused by invalid stsd entry access
+ Since mss has no moov, default stsd entry should be created with media-caps.
+ https://bugzilla.gnome.org/show_bug.cgi?id=782042
+
+=== release 1.11.91 ===
+
+2017-04-27 17:29:58 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ * meson.build:
+ Release 1.11.91
+
+2017-04-27 15:58:47 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/fur.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
+
+2017-04-27 15:28:02 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/LINGUAS:
+ * po/el.po:
+ * po/fur.po:
+ po: Update translations
+
+2017-04-27 12:56:27 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Don't crash in debug output if stream==NULL
+ That case is correctly handled below but not in the debug output.
+ https://bugzilla.gnome.org/show_bug.cgi?id=781270
+
+2017-04-25 17:11:27 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Don't perform seeks with inconsistent seek values
+ If gst_segment_do_seek() fails, we shouldn't try seeking on that
+ resulting segment but just error out. Crashes further down the line
+ otherwise.
+
+2017-04-24 20:27:49 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From 60aeef6 to 48a5d85
+
+2017-04-24 17:31:04 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/rtp-payloading.c:
+ tests: rtp-payloading: add test for rtph264depay avc/byte-stream output
+ Make sure avc output doesn't contain SPS/PPS inline, but
+ byte-stream output does.
+
+2017-04-24 17:29:37 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/rtp/gstrtph264depay.c:
+ rtph264depay: don't insert SPS/PPS inline for AVC output
+ SPS/PPS are in the caps in this case and shouldn't be in
+ the stream data.
+
+2017-04-21 19:09:14 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Chain up to the parent class' provide_clock() implementation
+ If no clock was provided directly by rtspsrc. This behaviour was removed
+ by f8013487c91a6ffc552a4b25aa1a70f0bd5377f8 and results in rtspsrc not
+ providing the system clock via the rtpjitterbuffer.
+ As a result, if another element like an audio sink, provides a clock,
+ the pipeline would select that (when going to PAUSED/PLAYING again later).
+ Audio clocks usually don't progress in PAUSED, and thus our live source
+ won't be able to use the clock to produce data, making the sink never
+ preroll and everything is stuck.
+
+2017-04-20 11:22:15 +0200 Jürgen Sachs <juergen.sachs@metz-ce.de>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: reset sample_description_id to default
+ Fixes stream where sample_description_id is specified in the tfhd
+ https://bugzilla.gnome.org/show_bug.cgi?id=778337
+
+2017-04-20 13:16:24 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/multifile/gstsplitmuxsink.c:
+ splitmuxsink: Don't use an explicit name for requesting audio pads
+ ... unless the muxer uses the same audio pad template name as
+ splitmuxsink. We can't request a pad called "audio_0" on a muxer that
+ wants pads to be "sink_%d".
+
+2017-02-23 09:31:36 +0900 ChangBok Chae <changbok.chea@gmail.com>
+
+ * gst/flv/gstflvdemux.c:
+ flvdemux: remove duplicated segment initialization
+ It's also done in gst_flv_demux_cleanup().
+ https://bugzilla.gnome.org/show_bug.cgi?id=779106
+
+2017-04-20 20:17:35 +1000 Xavier Claessens <xavier.claessens@collabora.com>
+
+ * gst/multifile/gstsplitmuxsink.c:
+ splitmuxsink: Correctly catch FLUSH events in probes
+ https://bugzilla.gnome.org/show_bug.cgi?id=767498
+
+2017-04-19 12:28:12 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/rtpmanager/gstrtpsession.c:
+ * gst/rtpmanager/rtpsession.c:
+ * gst/rtpmanager/rtpsession.h:
+ Revert "rtpbin: pipeline gets an EOS when any rtpsources byes"
+ This reverts commit eeea2a7fe88a17b15318d5b6ae6e190b2f777030.
+ It breaks EOS in some sender pipelines, see
+ https://bugzilla.gnome.org/show_bug.cgi?id=773218#c20
+
+2017-04-14 17:01:49 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Reset adapter in more discontinuity cases
+ In push mode we process as much as possible in the adapter. When we receive
+ a DISCONT buffer which we can't match to an actual sample (based on the existing
+ sample table) and there is still data remaining in the incoming adapter,there is
+ one of two cases happening:
+ 1) We are doing reverse playback, in which case we should flush out all pending
+ data
+ 2) We have leftover data from the previous incoming buffer... which we can't do
+ anything about.
+ For the second case, make sure we flush out the remaining data so that we can start
+ parsing again from scratch.
+ https://bugzilla.gnome.org/show_bug.cgi?id=781319
+
+2017-04-14 10:56:41 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Use GST_ELEMENT_ERROR_WITH_DETAILS
+ Allows the application to know the exact status code that was returned
+ by the server in a programmatic fashion.
+ https://bugzilla.gnome.org/show_bug.cgi?id=781304
+
+2017-04-16 18:47:56 +0900 Seungha Yang <sh.yang@lge.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Fix leak on QtDemuxStreamStsdEntry
+ Fix unit test failure
+ https://bugzilla.gnome.org/show_bug.cgi?id=781362
+
+2017-04-14 13:38:53 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ * gst/isomp4/atoms.h:
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Fix timescale of timecode tracks
+ They should have ideally the same timescale of the video track, which we
+ can't guarantee here as in theory timecode configuration and video
+ framerate could be different. However we should set a correct timescale
+ based on the framerate given in the timecode configuration, and not just
+ use the framerate numerator.
+
+2017-04-13 13:25:06 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Properly reset demuxer when all streams are EOS
+ Make sure offset and neededbytes are properly resetted when all
+ streams are EOS in push-mode.
+ Avoids cases when some data might still be pushed by upstream (because
+ it didn't yet see the resulting GST_FLOW_EOS yet) and qtdemux gets
+ completely lost.
+ https://bugzilla.gnome.org/show_bug.cgi?id=781266
+
+2017-04-13 08:00:30 +0200 Edward Hervey <edward@centricular.com>
+
+ * ext/soup/gstsouphttpsrc.c:
+ souphttpsrc: Make more usage of error macro
+ And make sure we actually use the provided soup_msg argument in the macro
+
+2017-04-12 18:46:53 +0530 Nirbheek Chauhan <nirbheek@centricular.com>
+
+ * ext/meson.build:
+ meson: Print message when disabling taglib on MSVC
+
+2017-04-12 13:26:59 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Don't forget to update pad->last_buf
+ buf is the current pad->last_buf value. If ever it gets copied/unreffed,
+ we need to make sure to write back the new pointer to the last_buf
+ variable.
+ Fixes using wrong pointer values in the case of decrasing DTS value
+
+2017-04-12 11:33:05 +0200 Edward Hervey <edward@centricular.com>
+
+ * tests/check/elements/.gitignore:
+ tests: Add vp9enc to gitignore
+
+2017-04-11 13:41:48 +0200 Jürgen Sachs <juergen.sachs@metz-ce.de>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: fix: sample description index override in tfhd not evaluated
+ https://bugzilla.gnome.org/show_bug.cgi?id=778337
+
+2017-04-12 11:03:24 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Add out-of-bound check
+ Make sure we don't read invalid memory
+
+2016-04-27 12:17:37 -0300 Thiago Santos <thiagoss@osg.samsung.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: move parsing of tkhd out of stsd entry loop
+ It needs only to be read once.
+
+2016-04-07 12:23:35 -0300 Thiago Santos <thiagoss@osg.samsung.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: check for a different stsd entry before pushing a sample
+ Before pushing a sample, check if there was a change in the current
+ stsd entry. This patch also assumes that the first stsd entry is
+ used as default for the first sample. It might cause an uneeded
+ caps renegotiation when this isn't the case.
+
+2016-04-06 12:55:18 -0300 Thiago Santos <thiagoss@osg.samsung.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: parse all stsd entries
+ stsd can have multiple format entries, parse them all.
+ This is required to play DVB DASH profile that uses multiple entries
+ to identify the different available bitrates/options on dash streams
+ The stream format-specific data is not stored into QtDemuxStreamStsdEntry
+
+2016-04-05 14:34:00 -0300 Thiago Santos <thiagoss@osg.samsung.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: rework stsd sample entries access
+ Instead of using the stsd as a base pointer, use the actual stsd
+ entry as the stsd can have multiple entries. This is rarely used
+ for file playback but is a possible profile with in DVB DASH specs.
+ This still doesn't support stsd with multiple entries but makes it
+ easier to do so.
+
+2016-04-05 18:00:10 -0300 Thiago Santos <thiagoss@osg.samsung.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: get stsd child by index instead of type
+ There might be multiple children with the same type
+
+2017-04-07 16:33:18 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * tests/check/elements/rtprtx.c:
+ tests/check/rtprtx: add checks for rtprtxqueue's max-size-{time,packets} properties
+ https://bugzilla.gnome.org/show_bug.cgi?id=780867
+
+2017-04-04 17:33:31 +0300 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxqueue.c:
+ * gst/rtpmanager/gstrtprtxqueue.h:
+ rtprtxqueue: implement handling of the max-size-time property
+ https://bugzilla.gnome.org/show_bug.cgi?id=780867
+
+2017-04-10 23:49:06 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * autogen.sh:
+ * common:
+ Automatic update of common submodule
+ From 39ac2f5 to 60aeef6
+
+2017-04-10 08:56:00 +0000 Todor Tomov <todor.tomov@linaro.org>
+
+ * sys/v4l2/gstv4l2bufferpool.c:
+ v4l2object: Copy timestamp when importing buffers
+ This is needed for V4L2_OUTPUT interface, and is harmless of
+ V4L2_CAPTURE interfaces. This will fix timestamp in cases like:
+ v4l2src io-mode=dmabuf ! v4l2videoNenc output-io-mode=dmabuf-import ! ...
+ Same apply for userptr.
+ https://bugzilla.gnome.org/show_bug.cgi?id=781119
+
+2017-04-10 15:55:30 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Fix last_dts tracking for raw audio and similar formats
+ Accumulate the durations directly and don't scale yet another time by
+ the number of samples.
+
+2017-04-07 10:48:50 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * tests/check/elements/splitmux.c:
+ tests: fix leak in splitmux test
+ https://bugzilla.gnome.org/show_bug.cgi?id=781025
+
+2017-04-07 15:29:43 +0800 Lyon Wang <lyon.wang@nxp.com>
+
+ * gst/audiofx/gstscaletempo.c:
+ scaletempo: Scale GAP event timestamp and duration like for buffers
+ https://bugzilla.gnome.org/show_bug.cgi?id=781008
+
+2017-02-17 10:01:08 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * sys/v4l2/gstv4l2videodec.c:
+ * sys/v4l2/gstv4l2videodec.h:
+ v4l2dec: Fix race when going from PAUSED to READY
+ Running `gst-validate-launcher -t validate.file.playback.change_state_intensive.vorbis_vp8_1_webm`
+ on odroid XU4 (s5p-mfc v4l2 driver) often leads to:
+ ERROR:../subprojects/gst-plugins-good/sys/v4l2/gstv4l2videodec.c:215:gst_v4l2_video_dec_stop: assertion failed: (g_atomic_int_get (&self->processing) == FALSE)
+ This happens when the following race happens:
+ - T0: Main thread
+ - T1: Upstream streaming thread
+ - T2. v4l2dec processing thread)
+ [The decoder is in PAUSED state]
+ T0. The validate scenario runs `Executing (36/40) set-state: state=null repeat=40`
+ T1- The decoder handles a frame
+ T2- A decoded frame is push downstream
+ T2- Downstream returns FLUSHING as it is already flushing changing state
+ T2- The decoder stops its processing thread and sets `->processing = FALSE`
+ T1- The decoder handles another frame
+ T1- `->process` is FALSE so the decoder restarts its streaming thread
+ T0- In v4l2dec-> stop the processing thread is stopped
+ NOTE: At this point the processing thread loop never started.
+ T0- assertion failed: (g_atomic_int_get (&self->processing) == FALSE)
+ Here I am removing the whole ->processing logic to base it all on the
+ GstTask state to avoid duplicating the knowledge.
+ https://bugzilla.gnome.org/show_bug.cgi?id=778830
+
+=== release 1.11.90 ===
+
+2017-04-07 16:31:56 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ * meson.build:
+ Release 1.11.90
+
+2017-04-07 15:18:11 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
+
+2017-04-07 15:06:30 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/el.po:
+ po: Update translations
+
+2017-04-06 12:01:00 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/audioparsers/gstaacparse.c:
+ aacparse: streamline and improve AudioSpecificConfig parsing
+ AudioSpecifigConfig is used in a variety of AAC streams but was
+ being parsed differently. Instead, make everyone use the same parsing.
+ * Remove unused 'bits' field (it was always set to 0 if present)
+ * Add proper GAConfig parsing (to know the number of samples per frame
+ if present).
+ Fixes wrong rate/channels configuration in streams coming from qtdemux
+ https://bugzilla.gnome.org/show_bug.cgi?id=780966
+
+2017-04-05 09:46:31 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * sys/v4l2/gstv4l2videodec.c:
+ v4l2videodec: Fix 32bit only printf format
+ The previous patch was using %llu for 64bits printf, which is 32bit
+ specific. We also trace the latency in time human readable form now.
+
+2016-03-16 16:22:48 +0100 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * sys/v4l2/gstv4l2object.c:
+ v4l2object: set streamparm for outputs that support it
+ Without a specified framerate from the sink, the decoder frame interval
+ should be set using the framerate of the encoded video stream.
+ Therefore, the v4l2object should be able to change the framerate on the
+ output if the V4L2 device accepts it.
+ This is also necessary for mem2mem encoders so that their bitrate
+ calculation code may work correctly and they may report the correct
+ frame duration on the capture queue.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779466
+
+2016-03-16 16:24:55 +0100 Philipp Zabel <p.zabel@pengutronix.de>
+
+ * sys/v4l2/gstv4l2videodec.c:
+ v4l2videodec: only set latency if the frame duration is valid
+ If the duration of the v4l2object is GST_CLOCK_TIME_NONE, because the
+ sink did not specify a framerate in the caps and the driver accepts the
+ framerate, the decoder element uses GST_CLOCK_TIME_NONE to calculate and
+ set the element latency.
+ While this is a bug of the capture driver, the decoder element should
+ not use the invalid duration to calculate a latency, but print a warning
+ instead.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779466
+
+2016-11-23 12:17:55 -0500 Olivier Crête <olivier.crete@collabora.com>
+
+ * sys/v4l2/gstv4l2sink.c:
+ v4l2sink: Block in preroll_wait on unlock
+ The correct behaviour of anything stuck in the ->render() function
+ between ->unlock() and ->unlock_stop() is to call
+ gst_base_sink_wait_preroll() and only return an error if this returns an
+ error, otherwise, it must continue where it left off!
+ https://bugzilla.gnome.org/show_bug.cgi?id=774945
+
+2017-04-05 15:55:20 +1000 Jan Schmidt <jan@centricular.com>
+
+ * ext/vpx/gstvp9dec.c:
+ vp9dec: Add warnings for unsupported frame formats
+ At least output an element warning on the bus when we
+ encounter a frame format GStreamer doesn't currently support.
+
+2017-04-04 17:55:13 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/audioparsers/gstaacparse.c:
+ aacparse: Handle Parametric Stereo with HE-AAC(v2)
+ According to ISO/IEC:14496-2:2009 , in the case of HE-AACv2 (audioObjecType
+ 29) parametric stereo is used (a single mono track is used and then
+ transformations are applied to it to provide a stereo output).
+ We therefore report two channels in the case where there is one reported
+ in the audioChannelConfiguration.
+ Fixes the various issues where a demuxer would report two channels, but
+ then the parser would say there's only one channel, and then the decoder
+ would output two channels.
+
+2017-04-04 15:22:25 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Simplify buffer refcounting in add_buffer() and remove unneeded NULL checks
+
+2017-04-04 15:08:33 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Select the best pad based on the cached last_buf if any
+ last_buf is the one we're going to write next, not buf. As such we
+ should check timestamps against that one if there is one to select the
+ earliest pad.
+ Also remember the currently selected pad in the very beginning when
+ storing the first last_buf.
+ This both solves some edge cases where not the correct next pad was
+ selected corresponding to the target interleave.
+
+2017-04-04 15:07:40 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Error out immediately if a timecode is to be written but downstream return not-OK
+
+2017-04-03 11:34:49 +0200 Edward Hervey <edward@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Update variables before early exit
+ This is an update of d78d5896272d78df41e696fac929e7dfb3bb3dfa
+ We still exit as early as possible in case of non-ok/non-unlinked combined
+ flow, but we first make sure that we update the internal position variables.
+ This ensures that if upstreams "ignores" the flow return (and carries on pushing),
+ we don't end up processing data with completely bogus variables/positions.
+
+2017-03-24 00:11:13 +1300 Douglas Bagnall <douglas@halo.gen.nz>
+
+ * gst/interleave/interleave.c:
+ * gst/interleave/interleave.h:
+ interleave: avoid using uninitialised ordering_map
+ If self->channel_positions == NULL (which seems unlikely),
+ self->default_channels_ordering_map will be used unintialised.
+ We avoid that by keeping track of the channel_mask, which is set when
+ the ordering map is initialised.
+ https://bugzilla.gnome.org/show_bug.cgi?id=780331
+
+2017-03-23 23:56:31 +1300 Douglas Bagnall <douglas@halo.gen.nz>
+
+ * gst/interleave/interleave.c:
+ interleave: don't overflow channel map with >64 channels
+ When there are more than 64 channels, we don't want to exceed the
+ bounds of the ordering_map buffer, and in these cases we don't want to
+ rempa at all. Here we avoid doing that.
+ https://bugzilla.gnome.org/show_bug.cgi?id=780331
+
+2017-03-28 14:23:16 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * tests/check/meson.build:
+ meson: Use get_pkgconfig_variable instead of calling pkg-config ourself
+ It is avalaible in meson 0.36 which is now are requirement
+
+2017-03-28 14:22:41 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * pkgconfig/gstreamer-plugins-good.pc.in:
+ * pkgconfig/meson.build:
+ pkgconfig: Do not ever build an installed .pc file
+
+2017-03-28 11:15:53 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * tests/check/meson.build:
+ meson: test: Fix environment object usage
+
+2017-03-28 11:14:47 -0300 Thibault Saunier <thibault.saunier@osg.samsung.com>
+
+ * meson.build:
+ * pkgconfig/gstreamer-plugins-good.pc.in:
+ * pkgconfig/meson.build:
+ pkgconfig: Generate the pkg-config with meson too
+
+2017-03-27 21:52:00 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: In gap mode, consider the mdat offset when calculating the remaining mdat size
+ The mdat generally does not start at offset 0, we have to include the
+ size of the moof and whatever else was in front of the mdat.
+
+2017-03-27 11:43:31 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atomsrecovery.c:
+ atomsrecovery: Error out when fseek() fails instead of silently ignoring
+ CID 1403262
+
+2017-03-23 22:13:05 +0100 Carlos Rafael Giani <dv@pseudoterminal.org>
+
+ * sys/v4l2/gstv4l2object.c:
+ v4l2object: Also add videometa if there is padding to the right and bottom
+ https://bugzilla.gnome.org/show_bug.cgi?id=780478
+
+2017-03-21 12:54:27 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtpmux.c:
+ rtpmux: fix output segment and buffer DTS to correspond to the flattened PTS
+ https://bugzilla.gnome.org/show_bug.cgi?id=780347
+
+2017-03-23 17:53:19 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ * gst/isomp4/gstqtmux.h:
+ qtmux: Remove some unused variables
+
+2017-03-23 15:01:16 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Remove a couple of unneeded levels of indentation
+
+2017-03-22 18:18:40 +0000 Enrique Ocaña González <eocanha@igalia.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: distinguish TFDT with value 0 from no TFDT at all
+ TFDTs with time 0 are being ignored since commit 1fc3d42f. They're
+ mistaken with the case of not having TFDT, but those two cases
+ must be distinguished in some way.
+ This patch passes an extra boolean flag when the TFDT is present.
+ This is now the condition being evaluated, instead of checking for
+ 0 time.
+ https://bugzilla.gnome.org/show_bug.cgi?id=780410
+
+2017-03-22 19:15:09 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Reset current chunk after writing out timecode
+ If we have multiple tracks with timecodes, or it's not the first track
+ that has timecodes, or not the first buffer, we already started a chunk
+ for media data. We now need to "close" that chunk because we wrote data
+ for the timecode track and a new chunk has to be started for the
+ original track the next time it has data.
+
+2017-03-22 18:52:51 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ * gst/isomp4/gstqtmux.h:
+ qtmux: Do timecode handling per track, not per muxer instance
+ There could be multiple video tracks with timecodes.
+
+2017-03-22 00:38:51 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ * gst/matroska/matroska-demux.c:
+ qtdemux: matroskademux: Ignore repeated seek events
+ Similar to what was done in adaptivedemux, ignore seek
+ events we've already handled - such as when they are received
+ on every srcpad of files with lots of streams.
+
+2017-03-21 14:55:32 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ * gst/isomp4/qtdemux.h:
+ dashdemux: Update mdatleft from overall mdatsize and offset when observing a gap
+ Otherwise mdatleft will have a value calculated from the initial
+ mdatsize minus the parts of the stream that we saw, which is not
+ including all the parts of the stream that might've been skipped.
+
+2017-03-20 17:03:32 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/soup/gstsouphttpsrc.c:
+ * gst/audioparsers/gstmpegaudioparse.c:
+ docs: update two references to the removed 'mad' plugin
+ https://bugzilla.gnome.org/show_bug.cgi?id=776140
+
+2017-03-20 12:03:29 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxqueue.c:
+ rtprtxqueue: add basic documentation and example pipelines
+ Mostly explaining the difference between rtprtxqueue and rtprtxsend.
+
+2017-03-17 20:58:28 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * sys/v4l2/meson.build:
+ v4l2: Fix meson plugin shared object name
+ It didn't match between AutoMake and Meson, and the Meson name
+ didn't math the plugin name (video4linux2).
+
+2017-03-16 18:20:54 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxreceive.c:
+ rtprtxreceive: fix example pipelines and improve the documentation
+ https://bugzilla.gnome.org/show_bug.cgi?id=771383
+
+2017-03-17 14:10:40 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst/audioparsers/gstflacparse.c:
+ * gst/audioparsers/gstflacparse.h:
+ flacparse: fix playback if sample number does not start at 0
+ This reverts commit 29b807685d3c962bbe8afe351c5dca97d59eb5e0, while
+ fixing the original breaking tests/check/pipelines/flacdec.
+
+2017-03-17 11:30:04 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst/audioparsers/gstflacparse.c:
+ * gst/audioparsers/gstflacparse.h:
+ Revert "flacparse: fix playback if sample number does not start at 0"
+ This breaks gst-validate on the build server (though not locally),
+ and a unit test, and I can't run unit tests right now for some
+ unrelated reason.
+ This reverts commit 0747b56f8e7f4731d67f8d13a4bdc453dde0fdf7.
+
+2017-03-16 17:44:41 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/rtpsession.c:
+ rtpsession: print the correct variable in debug statement
+ This debug statement is meant to print the time since the last (early)
+ RTCP transmission, not the last regular RTCP transmission (which also
+ happens to be set a few lines above to current_time, so the debug output
+ is just confusing)
+
+2017-03-16 17:42:27 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxsend.c:
+ rtprtxsend: convert LOG message to TRACE
+ This is printed too often (for every chained buffer!) and just clutters the logs.
+
+2017-03-16 14:58:45 +0100 Miguel París Díaz <mparisdiaz@gmail.com>
+
+ * gst/rtpmanager/rtpsource.c:
+ rtpsource: fix warning message
+ https://bugzilla.gnome.org/show_bug.cgi?id=780105
+
+2017-03-16 13:54:54 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * gst/audioparsers/gstflacparse.c:
+ * gst/audioparsers/gstflacparse.h:
+ flacparse: fix playback if sample number does not start at 0
+ https://bugzilla.gnome.org/show_bug.cgi?id=777738
+
+2017-03-15 18:58:55 +0100 Miguel París Díaz <mparisdiaz@gmail.com>
+
+ * gst/rtpmanager/rtpsource.c:
+ * gst/rtpmanager/rtpsource.h:
+ rtpsource: get clock-rate from pt if needed to generate SR
+ https://bugzilla.gnome.org/show_bug.cgi?id=780105
+
+2017-03-16 13:52:48 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/soup/gstsouphttpsrc.c:
+ souphttpsrc: Include GStreamer souphttpsrc version in default User-Agent string
+
+2017-03-16 00:41:44 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/rtp/gstrtph264depay.c:
+ rtph264depay: fix crash with empty sprops-parameters
+ https://bugzilla.gnome.org/show_bug.cgi?id=780040
+
+2017-03-11 21:20:40 -0800 Thiago Santos <thiagossantos@gmail.com>
+
+ * gst/isomp4/atomsrecovery.c:
+ * gst/isomp4/atomsrecovery.h:
+ atomsrecovery: also handle extra atoms after 'mdia' in a 'trak'
+ Take into account the atoms at the end of the 'trak' atom when
+ recovering it. So that its size (already computed and added in the trak
+ size) isn't making offsets wrong.
+ https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-11 12:56:33 -0800 Thiago Santos <thiagossantos@gmail.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: avoid fallthrough to moovrecovery failure section
+ Return before that to preserve our successfull results, otherwise no
+ moov recovery information would be written
+ https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-11 12:27:28 -0800 Thiago Santos <thiagossantos@gmail.com>
+
+ * gst/isomp4/atomsrecovery.c:
+ atomsrecovery: expect more atom types at the headers
+ Skip more atoms at the header until it finds the 'mdat' to continue the
+ moov recovery
+ https://bugzilla.gnome.org/show_bug.cgi?id=771478
+
+2017-03-14 16:42:25 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * Makefile.am:
+ * configure.ac:
+ * tests/examples/Makefile.am:
+ * tests/examples/pulse/.gitignore:
+ * tests/examples/pulse/Makefile.am:
+ * tests/examples/pulse/pulse.c:
+ pulse example: Remove
+ That example only tested the property probe interface, which has been removed.
+ The same kind of thing can now be done with the generic gst-device-monitor tool.
+
+2017-03-14 16:38:02 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * sys/v4l2/gstv4l2object.h:
+ v4l2: Remove unused macro
+
+2017-03-14 16:35:25 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * sys/v4l2/gstv4l2object.c:
+ * sys/v4l2/gstv4l2object.h:
+ v4l2: Remove unused definitions
+
+2017-03-14 10:10:19 +0100 Emeric Grange <egrange@gopro.com>
+
+ * gst/isomp4/fourcc.h:
+ * gst/isomp4/gstqtmux.c:
+ * gst/isomp4/gstqtmuxmap.c:
+ * gst/isomp4/qtdemux.c:
+ * gst/isomp4/qtdemux_types.c:
+ qtmux: add CineForm support
+ https://bugzilla.gnome.org/show_bug.cgi?id=780024
+
+2017-03-14 15:09:44 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Only create new chunks if we have more than a single stream
+ There's no point in creating multiple chunks otherwise, it only wastes
+ some bytes for storing the chunk offsets.
+
+2017-03-14 10:09:46 +0100 Emeric Grange <egrange@gopro.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: add S16L support
+ https://bugzilla.gnome.org/show_bug.cgi?id=780022
+
+2017-03-14 15:48:08 +1100 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/elements/splitmux.c:
+ splitmux test: Use passed first/last timestamps
+ Don't hard-code the expected timestamp range, use the
+ values the caller is passing in.
+
+2017-03-12 11:42:25 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * Makefile.am:
+ * docs/plugins/inspect/plugin-soup.xml:
+ Add old plugin names to cruft list
+ This will help fixing uninstalled setup. Also fix missing path
+ correction in one of the plugin xml.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2016-12-15 12:38:40 +0100 Michael Dutka <mail@michael-dutka.de>
+
+ * gst/rtp/gstrtph264depay.c:
+ * gst/rtp/gstrtph265depay.c:
+ rtph264depay, rtph265depay: remove stray g_debug()
+ https://bugzilla.gnome.org/show_bug.cgi?id=779858
+
+2017-03-10 11:24:14 +0100 Wim Taymans <wtaymans@redhat.com>
+
+ * gst/isomp4/gstqtmux.c:
+ qtmux: init fourcc
+ Initialize the fourcc to 0 so that we can detect failure later.
+
+2017-03-08 22:50:52 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/level.c:
+ * tests/check/elements/rglimiter.c:
+ tests: Add missing LDADD for libm in tests using math.h
+ Also, remove the math.h include for the one that just prentend to need
+ it.
+
+2017-03-08 22:15:46 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * Makefile.am:
+ * docs/plugins/gst-plugins-good-plugins-docs.sgml:
+ Fix shout2 plugin doc generation
+ In the previous patch, we also renamed shout2send to shout2, so it does
+ not clash with it's feature. Though we forgot to rename it in the doc
+ reference. This patch also add a cruft detection on the xml that made me
+ miss this error.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2017-03-04 10:52:47 -0500 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-shout2.xml:
+ * ext/pulse/Makefile.am:
+ * ext/pulse/meson.build:
+ * ext/shout2/gstshout2.c:
+ * ext/soup/Makefile.am:
+ * ext/soup/meson.build:
+ * sys/oss4/Makefile.am:
+ Fix plugin filenames to match plugin names
+ - libgstpulse.so becomes libgstpulseaudio.so
+ - libgstsouphttpsrc.so becomes libgstsoup.so
+ - libgstoss4audio.so becomes libgstoss4.so
+ https://bugzilla.gnome.org/show_bug.cgi?id=779344
+
+2017-03-08 16:01:02 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ qtmux: Free EDTS instead of just clearing it and setting it to NULL
+
+2017-03-08 15:27:32 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Fix some memory leaks related to timecode tracks
+
+2017-03-04 00:34:44 +1100 Jan Schmidt <jan@centricular.com>
+
+ * tests/check/elements/splitmux.c:
+ splitmux: Add unit test for reverse playback
+ Ensure that reverse playback works and generates the range
+ of timestamps (0-3s) we expect, in monotonically descending order.
+
+2017-02-28 11:50:45 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/multifile/gstsplitmuxsrc.c:
+ splitmuxsrc: Fix reverse playback
+ Fix the check for whether the start time of the segment has
+ been reached when playing in reverse. Otherwise, playback
+ stops after reaching the start of any file part, instead of
+ continuing until all parts within the segment have played
+
+2017-02-22 03:01:31 +1100 Jan Schmidt <jan@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Don't lose crypto info on a new moof
+ We parse the next moof in advance of having pushed
+ all samples from the previous one in some cases, and
+ we'll still need the crypto info from the previous
+ fragment so keep around any unused crypto info entries
+ when adding new ones
+
+2017-02-27 13:55:58 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/atoms.c:
+ * gst/isomp4/atoms.h:
+ * gst/isomp4/gstqtmux.c:
+ qtmux: Update modification times when sending the moov
+ https://bugzilla.gnome.org/show_bug.cgi?id=779422
+
+2017-03-01 16:11:47 -0800 Michael Smith <mlrsmith@gmail.com>
+
+ * gst/audioparsers/gstsbcparse.h:
+ sbcparse: Fix up values for allocation enumeration.
+ https://bugzilla.gnome.org/show_bug.cgi?id=779389
+
+2017-02-28 13:10:50 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/rtpmanager/gstrtprtxreceive.c:
+ rtprtxreceive: fix potential leak of old, unassociated, association requests
+ https://bugzilla.gnome.org/show_bug.cgi?id=722560
+
+2017-02-28 15:47:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/avi/gstavidemux.c:
+ avidemux: Don't increment -1 / unset indices
+ CID 1398545
+
+2017-02-28 15:20:31 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Protect against NULL pointer dereference for streams without caps
+ CID 1363332
+
+2017-02-28 12:57:02 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtph263pay.c:
+ rtph263pay: Free mac on errors
+ CID 1212149
+
+2017-02-28 12:45:24 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtpvorbispay.c:
+ rtpvorbispay: Add missing break to for loop
+
+2017-02-28 11:02:54 +0100 Edward Hervey <edward@centricular.com>
+
+ * tests/check/Makefile.am:
+ check: Fix splitmux test CFLAGS
+ Needs to know where the gstapp headers are
+
+2017-02-27 21:02:51 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/isomp4/qtdemux.c:
+ qtdemux: Fix compilation with gcc 7
+ qtdemux.c: In function ‘qtdemux_parse_samples’:
+ qtdemux.c:8450:39: error: ‘*’ in boolean context, suggest ‘&&’ instead [-Werror=int-in-bool-context]
+ if (stream->samples_per_frame * stream->bytes_per_frame) {
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
+
+2017-02-27 21:01:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/audioparsers/gstmpegaudioparse.c:
+ mpegaudioparse: Fix compilation with gcc 7
+ gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_reset’:
+ gstmpegaudioparse.c:209:3: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
+ memset (mp3parse->xing_seek_table_inverse, 0, 256);
+ ^~~~~~
+ gstmpegaudioparse.c: In function ‘gst_mpeg_audio_parse_handle_first_frame’:
+ gstmpegaudioparse.c:951:7: error: ‘memset’ used with length equal to number of elements without multiplication by element size [-Werror=memset-elt-size]
+ memset (mp3parse->xing_seek_table_inverse, 0, 256);
+ ^~~~~~
+
+2017-02-27 19:31:39 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtpvorbispay.c:
+ rtpvorbispay: When getting new headers, replace the old version of them
+ This prevents storing an infinite amount of e.g. comment headers if they
+ come without a new initialization header in front of them. There can
+ only be one header of each type.
+
+2017-02-27 19:25:35 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/rtp-payloading.c:
+ rtp-payloading: Add new test for Vorbis renegotiation
+ Check if encoding, payloading, depayloading and decoding works if the
+ stream configuration (and thus the headers) change.
+
+2017-02-27 19:24:07 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtpvorbispay.c:
+ vorbispay: Only replace headers when receiving a new config header
+ If we also replace all headers when receiving any possibly following
+ comments header, we would throw away the config header before being able
+ to make use of it.
+
+2017-02-23 12:11:15 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * tests/check/Makefile.am:
+ * tests/check/elements/splitmux.c:
+ tests: splitmux: add unit test for content with sparse streams
+ https://bugzilla.gnome.org/show_bug.cgi?id=761086
+
+2017-02-22 11:23:19 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/multifile/gstsplitmuxpartreader.c:
+ splitmuxpartreader: ignore sparse streams when calculating the end offset of a part
+ A sparse stream's ending timestamp can be considerably smaller
+ than the ending timestamps of the other streams, which can lead
+ to skipping considerable time from the next part.
+ https://bugzilla.gnome.org/show_bug.cgi?id=761086
+
+2017-02-22 11:21:06 +0200 George Kiagiadakis <george.kiagiadakis@collabora.com>
+
+ * gst/multifile/gstsplitmuxpartreader.c:
+ splitmuxpartreader: identify sparse streams
+
+2017-02-25 21:47:03 -0300 Edgard Lima <edgard.lima@gmail.com>
+
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * gst/audioparsers/gstamrparse.c:
+ * gst/rtp/gstrtpg726depay.c:
+ * gst/rtp/gstrtpg726depay.h:
+ * gst/rtp/gstrtpg726pay.c:
+ * gst/rtp/gstrtpg726pay.h:
+ * gst/rtp/gstrtppcmadepay.c:
+ * gst/rtp/gstrtppcmadepay.h:
+ * gst/rtp/gstrtppcmapay.c:
+ * gst/rtp/gstrtppcmapay.h:
+ * gst/rtp/gstrtppcmudepay.c:
+ * gst/rtp/gstrtppcmudepay.h:
+ * gst/rtp/gstrtppcmupay.c:
+ * gst/rtp/gstrtppcmupay.h:
+ * gst/rtp/gstrtpspeexdepay.c:
+ * gst/rtp/gstrtpspeexdepay.h:
+ * gst/rtp/gstrtpspeexpay.c:
+ * gst/rtp/gstrtpspeexpay.h:
+ * sys/v4l2/gstv4l2.c:
+ * sys/v4l2/gstv4l2bufferpool.c:
+ * sys/v4l2/gstv4l2bufferpool.h:
+ * sys/v4l2/gstv4l2colorbalance.c:
+ * sys/v4l2/gstv4l2colorbalance.h:
+ * sys/v4l2/gstv4l2object.c:
+ * sys/v4l2/gstv4l2object.h:
+ * sys/v4l2/gstv4l2src.c:
+ * sys/v4l2/gstv4l2src.h:
+ * sys/v4l2/gstv4l2tuner.c:
+ * sys/v4l2/gstv4l2tuner.h:
+ * sys/v4l2/gstv4l2vidorient.c:
+ * sys/v4l2/gstv4l2vidorient.h:
+ * sys/v4l2/v4l2_calls.c:
+ * sys/v4l2/v4l2_calls.h:
+ Update Edgard Lima's email
+ https://bugzilla.gnome.org/show_bug.cgi?id=779230
+
+2017-02-08 13:36:00 +0000 Andrew <nifigase@gmail.com>
+
+ * gst/rtpmanager/gstrtpjitterbuffer.c:
+ * gst/rtpmanager/rtpjitterbuffer.c:
+ * gst/rtpmanager/rtpjitterbuffer.h:
+ rtpjitterbuffer: Don't always reset PTS to 0 after a gap
+ In function rtp_jitter_buffer_calculate_pts: If gap in incoming RTP
+ timestamps is more than (3 * jbuf->clock_rate) we call
+ rtp_jitter_buffer_reset_skew which resets pts to 0. So components down
+ the pipeline (playes, mixers) just skip frames/samples until pts becomes
+ equal to pts before gap.
+ In version 1.10.2 and before this checking was bypassed for packets with
+ "estimated dts", and gaps were handled correctly.
+ https://bugzilla.gnome.org/show_bug.cgi?id=778341
+
+2017-02-24 15:59:41 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * meson.build:
+ meson: Update version
+
+2017-02-24 15:37:36 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ Back to development
+
=== release 1.11.2 ===
-2017-02-24 Sebastian Dröge <slomo@coaxion.net>
+2017-02-24 15:07:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.11.2
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2send.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ Release 1.11.2
+
+2017-02-24 12:50:21 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
2017-02-24 12:44:58 +0200 Sebastian Dröge <sebastian@centricular.com>