* Add support for ymodem protocol download
[platform/kernel/u-boot.git] / CHANGELOG
index 48d30f6..fdb6aae 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,105 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add support for ymodem protocol download
+  Patch by Stefano Babic, 29 Mar 2006
+
+* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
+  Merge from Markus Klotzbücher's repo, 01 Apr 2006
+
+* GCC-4.x fixes: clean up global data pointer initialization for all
+  boards
+
+* Update for Delta board:
+  - redundant NAND environment
+  - misc Monahans cleanups (remove dead code etc.)
+  - DA9030 Initialization; some minimal changes to PXA I2C driver to
+    make it work with the Monahans.
+  - Make Monahans clock frequency configurable using
+    CFG_MONAHANS_RUN_MODE_OSC_RATIO and
+    CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
+  Merge from Markus Klotzbücher's repo, 25 Mar 2006
+
+* Enable Quad UART om MCC200 board.
+
+* Cleanup MCC200 board configuration; omit non-existent stuff.
+
+* Add support for MPC859/866 Rev. A.0
+
+* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+
+* Fix DDR ECC bit definitions for MPC83xx.
+
+* Add initial support for MPC8349E MDS board.
+
+* Add support for ECC DDR initialization on MPC83xx.
+
+* Add DMA support for MPC83xx.
+
+* Add sync in do_reset() routine for MPC83xx after RPR register
+  was written to. It is need on some targets when BAT translation
+  is enabled.
+
+* Add bit definitions for MPC83xx DDR controller registers.
+
+* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+
+* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+
+* Add support for DS1374 RTC chip.
+
+* Add support for Lite5200B board.
+  Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+
+* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
+  timer and cpu_reset code from cpu/$(CPU) into the new
+  cpu/$(CPU)/$(SOC) directories
+  Patch by Andreas Engel, 13 Mar 2006
+
+* Change max size of uncompressed uImage's to 8MByte and add
+  CFG_BOOTM_LEN to adjust this setting.
+
+  As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
+  uImages was restricted to 4MBytes. This default size is now
+  increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
+  in the board config file.
+
+  Patch by Stefan Roese, 13 Mar 2006
+
+* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
+  Patch by Stefan Roese, 13 Mar 2006
+
+* cpu/ppc4xx/start.S : exceptions are enabled after relocation
+  Patch by Cedric Vincent, 06 Jul 2005
+
+* au1x00_eth.c: check malloc return value and abort if it failed
+  Patch by Andrew Dyer, 26 Jul 2005
+
+* Change the sequence of events in soft_i2c.c:send_ack() to keep from
+  incorrectly generating start/stop conditions on the bus.
+  Patch by Andrew Dyer, 26 Jul 2005
+
+* Fix bug in [id]cache_status commands for MPC85xx processors;
+  should look at LSB of L1CSRn registers to determine if L1 cache is
+  enabled, not the MSB.
+  Patch by Murray Jensen, 19 Jul 2005
+
+* Fix array overflow with fw_setenv on uninitialised environment
+  Patch by Murray Jensen, 15 Jul 2005
+
+* Add support for EmbeddedPlanet EP88x boards
+  Patch by Yuli Barcohen, 13 Jul 2005
+
+* Remove board specific configuration includes from the common xilinx
+  ethernet and iic adapter code.
+  Patch by Michael Libeskind, 12 Jul 2005
+
+* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
+  Patch by Murray Jensen, 08 Jul 2005
+
+* Add (some) definitions for the MPC85xx local bus controller
+  Patch by Murray Jensen, 08 Jul 2005
+
 * Add CPM2 I/O pin functions for MPC85xx processors
   Patch by Murray Jensen, 08 Jul 2005