-======================================================================
-Changes since U-Boot 1.1.4:
-======================================================================
+commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Apr 18 14:55:19 2007 +0400
-* Add monitor functions for indirect access to PPC440 DCR's
- Patch by Leonid Baryudin, 12 Oct 2006
+ Adapt log buffer code to support Linux 2.6
-* PPC405EP: Add support for board configuration of CPC0_PCI register
- This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
- Patch by Tolunay Orkun, 07 Apr 2006
+ A new environment variable, "logversion", selects the log buffer
+ behaviour. If it is not set or set to a value other than 2, then the
+ old, Linux 2.4.4, behaviour is selected.
-* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
- - Add configuration of Open Drain GPIO Output selection
- - Add configuration of initial value of GPIO output pins
- Patch by Tolunay Orkun, 07 Apr 2006
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
-* Fix spelling; minor code cleanup.
+commit a11e06965ec91270c51853407ff1261d3c740386
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Mar 28 19:06:19 2007 +0400
-* Fix JFFS2 compilation problem
- Patch by Stefan Roese, 12 Oct 2006
+ Extend POST support for PPC440
-* Cleanup of NAND update patch (remove changelog from cmd_nand.c)
- Patch by Guido Classen, 10 Oct 2006
+ Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
-* Several improvements to the new NAND subsystem:
- - JFFS2 related commands implemented in mtd-utils style
- - Support for bad blocks
- - Bad block testing commands
- - NAND lock commands
- Please take a look at doc/README.nand for more details
- Patch by Guido Classen, 10 Oct 2006
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
-* Define IH_CPU_AVR32
- Make it possible to generate AVR32 uImage files with mkimage and
- make cmd_bootm recognize them.
- Patch by Haavard Skinnemoen, 22 Sep 2006
+commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jun 22 14:58:04 2007 +0200
-* Fix buffer overflow problem in ft_build.c
- Patch by Fredrik Roubert, 09 Oct 2006
+ [ppc] Fix build breakage for all non-4xx PowerPC variants.
-* Make bootp implementation RFC3046 compliant
- Patch by Joakim Larsson, 27 Jun 2006
+ - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
+ - minor 4xx cleanup
-* TQM5200: perform POST memory test only on STK52xx carrier board.
- (and then only if PSC6_3 is read as "1" when booting).
- Patch by Martin Krause, 21 Jun 2006
+commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 20 18:14:24 2007 +0200
-* Move "ar" flags to config.mk to allow for silent "make -s"
- Based on patch by Mike Frysinger, 20 Jun 2006
+ Coding style cleanup. Refresh CHANGELOG.
-* Coding style cleanup
+commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 17:22:44 2007 +0200
-* Add support for EP82xxM boards
- Patch by Aaron Sells, 20 Jun 2006
+ ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
-* Fix comments in include/ppc440.h
- Patch by Martin Hicks, 16 Jun 2006
+ This patch adds a board command to configure the I2C bootstrap EEPROM
+ values. Right now 533 and 667MHz are supported for booting either via NOR
+ or NAND FLASH. Here the usage:
-* Update for CAM5200 board:
- - Map in a additional chip selects CS4 and CS5.
- - Modify the port configration, configure six UARTs and no PCI,
- ATA and USB.
- - Add custom flash driver to handle specific byte swapping
+ => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
+ => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
-* Fix TLB setup for Ocotea board
- Patch by Stefan Roese, 30 Sep 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix reset problem in sequoia sdram init code
- Patch by Stefan Roese, 23 Sep 2006
+commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 16:42:31 2007 +0200
-* Disable autoboot abort for FO300 when silent mode is enabled
- (according to S1 switch setting).
+ [ppc4xx] Fix problem with NAND booting on AMCC Acadia
-* Cleanup examples binaries
+ The latest changes showed a problem with the location of the NAND-SPL
+ image in the OCM and the init-data area (incl. cache). This patch
+ fixes this problem.
-* Add support for AMCC Rainier PPX440GRx eval board
- Patch by Stefan Roese, 13 Sep 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add NAND environment support for PPC440EPx Sequoia NAND boot config
- Patch by Stefan Roese, 12 Sep 2006
+commit 86ba99e34194394052d24c04dc40d1263d29a26f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 16:40:58 2007 +0200
-* Update NAND boot documentation
- Patch by Stefan Roese, 12 Sep 2006
+ [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
-* Fix alignment problem in "mtdparts" command
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add documentation on the latest build environment extensions to
- the README file.
+commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 11:33:41 2007 +0200
-* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+ [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
-* Fix LOG_DIR directory creation error.
- Add support for automatic creation of BUILD_DIR directory.
+ Now CONFIG_440 has to be defined in all PPC440 board config files.
-* Fix build problem cpu/ppc4xx/ndfc.c
- Patch by Stefan Roese, 07 Sep 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix build problem with CPCI440
- Patch by Stefan Roese, 07 Sep 2006
+commit efa35cf12d914d4caba942acd5a6c45f217de302
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 15 11:19:28 2007 +0200
-* Change Yellowstone to use CFI write buffer
- Patch by Stefan Roese, 07 Sep 2006
+ ppc4xx: Clean up 440 exceptions handling
-* Add support for AMCC Sequoia PPC440EPx eval board
- - Add support for PPC440EPx & PPC440GRx
- - Add support for PPC440EP(x)/GR(x) NAND controller
- in cpu/ppc4xx directory
- - Add NAND boot functionality for Sequoia board,
- please see doc/README.nand-boot-ppc440 for details
- - This Sequoia NAND image doesn't support environment
- in NAND for now. This will be added in a short while.
- Patch by Stefan Roese, 07 Sep 2006
+ - Introduced dedicated switches for building 440 and 405 images required
+ for 440-specific machine instructions like 'rfmci' etc.
-* Fix mkimage -l bug with multifile images on 64bit platforms
- Patch by David Updegraff, 06 Sep 2006
+ - Exception vectors moved to the proper location (_start moved away from
+ the critical exception handler space, which it occupied)
-* Fix build problems on sorcery board.
+ - CriticalInput now serviced (with default handler)
-* Fix coldfire build problems.
- Patch by Marian Balakowicz, 01 Sep 2006
+ - MachineCheck properly serviced (added a dedicated handler and return
+ subroutine)
-* Add support for a saving build objects in a separate directory.
- Modifications are based on the Linux kernel approach and support
- two use cases:
- 1) Add O= to the make command line 'make O=/tmp/build all'
- 2) Set environement variable BUILD_DIR to point to the desired location
- 'export BUILD_DIR=/tmp/build'
- 'make'
- The second approach can also be used with a MAKEALL script
- 'export BUILD_DIR=/tmp/build'
- './MAKEALL'
- Command line 'O=' setting overrides the BUILD_DIR environent variable.
- When none of the above methods is used the local build is performed
- and the object files are placed in the source directory.
+ - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
+ unhandled and those not relevant for 4xx were eliminated)
-* Remove the board/netstar/crcit binary from git repository.
+ - Eliminated Linux leftovers, removed dead code
-* Fix tools/updater build error.
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix tools/easylogo build error.
+commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 08:18:01 2007 +0200
-* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+ [ppc4xx] Add initial lwmon5 board support
-* Extended README entry on coding style
+ This patch adds initial support for the Liebherr lwmon5 board euqipped
+ with an AMCC 440EPx PowerPC.
-* Added another example showing simple interrupt interception.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Added simple_strtoul(), getenv() and setenv() to the exported functions.
- Also bumped up ABI version to reflect this change.
+commit 85f737376d5ff3d5f0d45a8b657686326d175307
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 07:39:43 2007 +0200
-* Added interrupt handling capabilities for mpc5xxx processors.
- Also added Linux like BUG() macros.
+ [ppc4xx] Extend 44x GPIO setup with default output state
-* Coding Style cleanup.
- Patch by Stefano Babic, 31 Aug 2006
+ The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
+ is extended with the default GPIO output state (level).
-* Add splashscreen support for MCC200 board.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Make the serial driver framework work with CONFIG_SERIAL_MULTI
- enabled
+commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 14 11:14:32 2007 +0200
-* PCIe endpoint support for AMCC Yucca 440SPe board
- Patch by Tirumala R Marri, 26 Aug 2006
+ [ppc4xx] Extend program_tlb() with virtual & physical addresses
-* Improve DIMM detection for AMCC Yucca 440SPe board
- Improved the memory DIMM detection for the Yucca 440SPe board for
- the case where a memory DIMM is falsely detected as present.
- This issue is seen on some AMCC Yucca 440SPe validation boards if
- only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
- populated and DIMM slot 1 is empty. In this case, U-Boot does
- not correctly detect that there is only one DIMM memory module
- installed and will falsely detect two DIMM memory modules are
- present and therefore U-Boot will not calculate the correct amount
- of total memory and u-boot will not booting up.
- Patch by Adam Graham, 24 Aug 2006
+ Now program_tlb() allows to program a TLB (or multiple) with
+ different virtual and physical addresses. With this change, now one
+ physical region (e.g. SDRAM) can be mapped 2 times, once with caches
+ diabled and once with caches enabled.
-* Fix typo.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Code cleanup
+commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 23 19:02:41 2007 +0200
-* Update for MCC200 / PRS200 boards:
- - auto-adjust console device for Linux.
- - fix typos.
+ Change 'repeatable' attribute of some commands to sensible values.
-* Add a fix for a buggy USB device on the FO300 board.
+ Most prominently this changes 'erase' to be non-repeatable.
-* Updates for MCC200 / PRS200 boards:
- - support for configurations with SDRAM or DDR memory,
- - support for highboot and lowboot
- - adjusting environment definitions
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
-* Add support for WTK FO300 board (TQM5200 based).
+commit 5afb202093f6a001797db92cf695b93a70ea9ab4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 23 18:47:48 2007 +0200
-* Fix TQM834x hang.
+ Fix 'run' not to continue after interrupted command
-* Update for SC520 board.
- Patch by David Updegraff, 02 Dec 2005
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
-* Fixed common.h spelling error.
- Patch by Cory Tusar, 30 Nov 2005
+commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Jun 8 14:52:22 2007 +0200
-* Fix typo.
- Patch by Andreas Engel, 28 Nov 2005
+ TQM5200: Add Flat Device Tree support, update default env. accordingly.
-* Fix fatload command on FAT32 formatted partitions.
- Patch by Joachim Jaeger, 18 Nov 2005
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Fix drivers/dm9000.c when configured in 32 bit mode.
- Patch by Eric Benard, 17 Nov 2005
+commit 9045f33c023f698660a2e45d1b2194c0711abebc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 8 10:24:58 2007 +0200
-* Cleanup debug code for yucca board.
+ Fix config problems on SC3 board; make ide_reset_timeout work.
-* MCC200: restrict addressable flash space to 32 MB
+commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Fri Jun 8 09:55:24 2007 +0200
-* Add debug console on COM12 for MCC200 board
+ [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
-* Fix control-c handing in CONFIG_CMDLINE_EDITING
- Properly pass break code back from readline.
- Patch by Roger Blofeld, 31 Jul 2006
+ Set the correct value in GPIOx_TCR when configuring the gpio
+ with CFG_440_GPIO_TABLE.
-* Add commandline history support to all AMCC eval boards
- Patch by Stefan Roese, 07 Aug 2006
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add Macronix MXLV320T flash support for AMCC Bamboo
- Patch by Stefan Roese, 07 Aug 2006
+commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 6 16:26:56 2007 +0200
-* Change "mii info" to not print an error upon missing PHY at address
- Patch by Stefan Roese, 07 Aug 2006
+ Coding Style cleanup; generate new CHANGELOG file.
-* Fix PCI-Express on PPC440SPe rev. A.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
-* Fix preboot message on TQM85xx after switching to hush parser.
+commit c440bfe6d6d92d66478a7e84402b31f48413617b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 6 11:42:13 2007 +0200
-* Adapt TQM85xx ramdisk address to Linux kernel memory map
+ ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
-* Add initial support for PCI-Express on PPC440SPe (Yucca board).
+ This patch adds NAND booting support for the AMCC Acadia eval board.
-* Fix compiler warning for TRAB board.
- Patch by Martin Krause, 07 Aug 2006
+ Please make sure to configure jumper J7 to position 2-3 when booting
+ from NOR, and to position 1-2 when booting for NAND.
-* Prevent USB commands from working when USB is stopped.
+ I also added a board command to configure the I2C bootstrap EEPROM
+ values. Right now only 267MHz is support for booting either via NOR
+ or NAND FLASH. Here the usage:
-* Add rudimentary handling of alternate settings of USB interfaces.
- This is in order to fix issues with some USB sticks timing out
- during initialization. Some code readability improvements.
+ => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
+ => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
-* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
- AMCC suggested to set the PMU bit to 0 for best performace on
- the PPC440 DDR controller.
- Please see doc/README.440-DDR-performance for details.
- Patch by Stefan Roese, 28 Jul 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
- Please see doc/README.bamboo for details.
- Patch by Stefan Roese, 27 Jul 2006
+commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Jun 5 12:30:52 2007 -0500
-* Fix CONFIG_CMDLINE_EDITING implementation
- Patch by Stefan Roese, 27 Jul 2006
+ mpc8641 image size cleanup
-* Fix preboot message on TQM5200 after switching to hush parser.
+ e600 does not have a bootpg restriction.
+ Move the version string to beginning of image at fff00000.
+ Resetvec.S is not needed.
+ Update flash copy instructions.
+ Add tftpflash env variable
-* MCC200: set default configuration to low_boot DDR,
- and support for configurable options high_boot and/or SDRAM.
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add support for 256 MB SDRAM on CPU87
- Patch by Josef Wagner, 25 Nov 2005
+commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Mon Jun 4 08:36:05 2007 +0200
-* Add configuration for cam5200 board (based on TQM5200S).
+ [PATCH] Fix ppc4xx bootstrap letter displayed on startup
-* More code cleanup
+ The attached patch is mainly cosmetic, allowing u-boot to
+ display the correct bootstrap option letter according to the
+ datasheets.
-* Disabled kvme080 board in MAKEALL because of build problems.
+ The original patch was extended with 405EZ support by Stefan
+ Roese.
-* Code cleanup
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update NetStar board
- Patch by Ladislav Michl, 03 Nov 2005
+commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 16:18:17 2007 +0200
-* Make code better readable.
- Patch by Ladislav Michl, 14 Sep 2005
+ ppc4xx: Add missing file for Bamboo NAND booting support
-* Enable initrd ATAG for xm250 board.
- Patch by Josef Wagner, 05 Sep 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add readline cmdline-editing extension
- Patch by JinHua Luo, 01 Sep 2005
+commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:58:19 2007 +0200
-* Add support for friendly-arm SBC-2410X board
- Patch by JinHua Luo, 01 Sep 2005
+ ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
-* Fix multi-part image support on i386 platform.
- Patch by David Updegraff, 19 Aug 2005
+ This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
+ suggested by AMCC it is not recommended to dynamically change the EBC
+ speed after bootup. So we undo this change to be on the safe side.
-* Add support for KVME080 board
- Patch by Sangmoon Kim, 18 Aug 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix MIPS LE build problem
- Patch by Matej Kupljen, 10 Aug 2005
+commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:29:04 2007 +0200
-* Check argument count in "mii" command.
- Problem pointed out by Andrew Dyer, 13 Jun 2005
+ ppc4xx: Update Sequoia NAND booting support with ECC
-* Cleanup TQM5200 board configurations:
- - make highboot configurations use environment at high end, too,
- to avoid flash fragmentation
- - always use redundand environment
- - don't enable video code for modules without graphics controller
- - provide useful (though different) mtdparts settings
- - get rid of CONFIG_CS_AUTOCONF which was always set anyway
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Extend mkconfig tool to print more useful target name
+commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:27:11 2007 +0200
-* Add support for high-boot on TQM5200 and TQM5200S boards.
- Hint: the CPLD on the TQM5200 must be programmed with a software
- version supporting the high boot option! The new TQM5200S is
- already supporting this option. On the TQM5200 this option will be
- supported in configurations with MPC5200 rev B processors.
- To actually "high boot", set jumper X30 on the STK52xx.
- Patch by Martin Krause, 12 Jul 2006
+ ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
-* Add support for new TQM5200 revisions
- - Support for TQM5200S (short version without graphic controller)
- - Support for modules with 'N' type S29GL128N Spansion flashes
- (requires changes to flash layout)
- - Support for MPC5200B cpu (mostly support for second SDRAM bank)
- Patch by Martin Krause, 07 Jul 2006
+ This patch adds NAND booting support for the AMCC Bamboo eval board.
+ Since the NAND-SPL boot image is limited to 4kbytes, this version
+ only supports the onboard 64MBytes of DDR. The DIMM modules can't be
+ supported, since the setup code for I2C DIMM autodetection and
+ configuration is too big for this NAND bootloader.
-* Fix support for PS/2 keyboard on TQM85xx boards
- The PS/2 keyobard driver for the TQM85xx modules only supports the
- internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
- include a DUART, the TQM8560 modules can't be used with the PS/2
- keyboard controller on the STK85xx board.
- The PS/2 keyboard driver should work with the modules TQM8540,
- TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
- Make sure the PS/2 controller on the STK85xx is programmed. Jumper
- settings: X66 1-2, 9-10; X61 2-3
- Patch by Martin Krause, 21 Jun 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Adjust RTC century handling on STK52xx board to match Linux driver.
- Patch by Martin Krause, 12 Jun 2006
+commit 42be56f53c8b107868e6125c8524ae84293e95a7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:23:04 2007 +0200
-* Adjust filenames for USB update images on TRAB board.
- During an automatic update via USB stick, U-Boot searches for
- images with the name "firmware.img" and "kernel.img". This names
- are now changed to "firmw_01.img" and "kernl_01.img". This is done,
- to prevent updates of new boards (with the new macronics "c" step
- flashes) with old, incompatible firmware or kernel versions.
- Patch by Martin Krause, 21 Jun 2006
+ NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
-* Bugfix in VFD routine on TRAB board.
- Make sure upper lext pixel can be set to blue, too
- (so far only red was possible).
- Patch by Martin Krause, 15 Feb 2006
+ The U-Boot NAND booting support is now extended to support ECC
+ upon loading of the NAND U-Boot image.
-* Enable buffered flash writes for TB5200 board.
+ Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
-* Fix some bugs in TRAB board flash driver.
- - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
- - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
- - remove "Unlock Bypass" mode, because macronix flashes do not support
- this mode officially
- - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
- for Intel compatible flashes, not for AMD compatible.
- Patch by Martin Krause, 15 Feb 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add additional error messages to flash driver on TRAB board
- (for erase errors and timeout errors)
- Patch by Martin Krause, 14 Feb 2006
+commit a471db07fbb65a841ffc9f4f112562b945230f98
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:19:29 2007 +0200
-* Add support for TB5200 board
- The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
- integrated in a little aluminium case.
- Patch by Martin Krause, 8 Jun 2006
+ ppc4xx: Prepare Bamboo port for NAND booting support
-* Enable buffered flash writes for TQM5200 board.
+ This patch updates the "normal" Bamboo NOR booting port, so
+ that it is compatible with the coming soon NAND booting
+ Bamboo port.
-* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
+ It also enables the 2nd NAND flash on the Bamboo.
-* Add support for TQM885D board.
- Patch by Martin Krause, 20 Mar 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix FEC initialisation: All MII configuration is done via FEC1
- registers, but MII_SPEED was configured according to FEC used. So
- if only FEC2 was used, this caused the real MII_SPEED register in
- FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
- Fix: always configure MII_SPEED on FEC1 only.
- Patch by Markus Klotzbuecher, 12 Jul 2006
-
-* Add support for SPC1920 board.
- Patch by Markus Klotzbuecher, 12 Jul 2006
-
-* MCC200 board: support console on any one of the Quad UART ports.
-
-* Fix error in flash protection calculation on MCC200 board.
-
-* Major PCMCIA Cleanup to make code better readable and maintainable.
- Notes:
- - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
- placed to the drivers/rpx_pmcia.c file to avoid duplication.
- Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- - drivers/i82365.c has been split into two parts located at
- board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
- the only boards using CONFIG_82365).
- - Changes were tested for clean build and *very* *few* boards.
-
-* Fix timer problems on AMCC yucca board.
- Set Timer Clock Select to use CPU clock as a timer input source.
-
-* Bring yucca config more in line with other AMCC boards.
+commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:16:58 2007 +0200
-* Add AMCC bamboo board to MAKEALL build script.
+ ppc4xx: Update in_be32() functions and friends to latest Linux version
-* Fix AMCC bamboo eval board compilation errors.
-
-* Add system memory to the PCI region list for AMCC PPC44x CPUs.
- Enabled it for Yucca board.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup config file and bootup output for Yucca board.
+commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:15:12 2007 +0200
-* Fix CONFIG_440_GX define usage.
+ NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
-* Remove autogenerated bmp_logo.h file.
+ This patch adds hardware ECC support to the NDFC driver. It also
+ changes the register access from using the "simple" in32/out32
+ functions to the in_be32/out_be32 functions, which make sure
+ that the access is correctly synced. This is the only recommended
+ access to SoC registers in the current Linux kernel.
-* Add support for AMCC 440SPe CPU based eval board (Yucca).
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Call serial_initialize() before first debug() is used.
+commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:12:15 2007 +0200
-* Cleanup trab board for GCC-4.x
+ NAND: Update nand_ecc.c to latest Linux version
-* VoiceBlue update: use new MTD flash partitioning methods, use more
- reasonable TEXT_BASE, update default environment and enable keyed
- autoboot.
- Patch by Ladislav Michl, 16. Aug 2005
+ This patch updates the nand_ecc code to the latest Linux version.
+ The main reason for this is the more compact code. This makes
+ it possible to include the ECC code into the NAND bootloader
+ image (NAND_SPL) for PPC4xx.
-* Add forgotten changes for the PLEB 2 Board.
- Patch by David Snowdon, 13. Aug 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for wrPPMC7xx/74xx boards
- Patch by Richard Danter, 12 Aug 2005
+commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:09:50 2007 +0200
-* Add support for gth2 board
- Patch by Thomas Lange, Aug 11 2005
+ ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
-* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
- Patch by Martin Krause, 8 Jun 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
- This patch supports two serial consoles on boards with
- a MPC5xxx CPU. The console can be switched at runtime
- by setting stdin, stdout and stderr to the desired serial
- interface (serial0 or serial1). The PSCs to be used as
- console port are definded by CONFIG_PSC_CONSOLE
- and CONFIG_PSC_CONSOLE2.
- See README.serial_multi for details.
+commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:24 2007 +0200
-* Bugfix in I2C initialisation on S3C2400.
- If the bus is blocked because of a previously interrupted
- transfer, up to eleven clocks are generated on the I2CSCL
- line to complete the transfer and to free the bus.
- With this fix pin I2CSCL (PG6) is really configured as GPIO
- so the clock pulses are really generated.
- Patch by Martin Krause, 04 Apr 2006
+ ppc4xx: Change Luan config file to support ECC
-* Fix DDR6 errata on TQM834x boards
- Patch by Thomas Waehner, 07 Mar 2006
+ With the updated 44x DDR2 driver the Luan board now supports
+ ECC generation and checking.
-* Remove obsolete flash driver board/tqm5200/flash.c
- Patch by Martin Krause, 11 Jan 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update configuration for CMC-PU2 board
- Patch by Martin Krause, 17 Nov 2005
+commit 7187db73491c8de0fb56efb5e5134ba5ec443089
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:00 2007 +0200
-* Add support for PS/2 keyboard on TQM85xx board
- Patch by Martin Krause, 07 Nov 2005
+ ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Tested on a STK85XX baseboard. Make sure the PS/2 controller
- has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+ Add config option for 180 degree advance clock control as needed
+ for the AMCC Luan eval board.
-* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
- In tsc2000_read_channel() the delay after setting the multiplexer
- to a temperature channel is increased from 1,5 ms to 10 ms. This
- is to allow the multiplexer inputs to stabilize after huge steps
- of the input signal level.
- Patch by Martin Krause, 08 Nov 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Adjust TQM5200 make targets
- Make the automatic CS configuration the default.
- The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
- and CONFIG_TQM5200_AC are removed.
- "TQM5200_config" is now the default for STK52XX.200 base boards.
- On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
- Patch by Martin Krause, 07 Nov 2005
+commit ee1529838abbfaa35f14e3ffbeaaba693159475f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 31 17:20:09 2007 +0200
-* Fix setting of environment variable "ver" on trab board
- The environment variable "ver" is now set before
- do_auto_update() is called, so that "ver" can be used
- in USB update scripts.
- Patch by Martin Krause, 27 Oct 2005
+ Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
-* Fix wrong usage of udelay() in led_blink() on trab board
- Patch by Martin Krause, 27 Oct 2005
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
-* Fix udelay bug in vfd.c for trab board
- Patch by Martin Krause, 27 Oct 2005
+commit 7049288fb1f16f1b317140226cdebd07bd416395
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:26:46 2007 +0200
-* Disable JFFS2 support for trab board
- Patch by Martin Krause, 27 Oct 2005
+ Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
-* Change mtdparts definition on trab board to match current flash map
- Patch by Martin Krause, 27 Oct 2005
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
-* Fix memory init problems on MCC200 board
+commit 4520fd4d2c450da49637216aa0e53739b61c60ac
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:06:36 2007 +0200
-* Fix IxEthDB.h to compile again
- Patch by Stefan Roese, 14 Jun 2006
+ Motion-PRO: Add support for redundant environment.
-* Minor cleanup for PCS440EP board
- Patch by Stefan Roese, 13 Jun 2006
+ Enable redundant environment, add a MTD partition for it; also add env.
+ variable command for passing MTD partitions to the kernel command line.
-* Add MCF5282 support (without preloader)
- relocate ichache_State to ram
- u-boot can run from internal flash
- Add EB+MCF-EV123 board support.
- Add m68k Boards to MAKEALL
- Patch from Jens Scharsig, 08 Aug 2005
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
- Patch by Scott McNutt, 08 Jun 2006
+commit a26eabeec31746f06d309103690892805696e344
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:05:11 2007 +0200
-* Nios II - Add EPCS Controller bootrom work-around
- -When booting from an epcs controller, the epcs bootrom may leave the
- slave select in an asserted state causing soft reset hang. This
- patch ensures slave select is negated at reset.
- Patch by Scott McNutt, 08 Jun 2006
+ Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
-* Update PK1C20 board
- -Update base addresses for standard configuration
- -Eliminate use of CACHE_BYPASS in board code
- Patch by Scott McNutt, 08 Jun 2006
+ Allow passing longer command line to the kernel - useful especially
+ for passing MTD partition layout.
-* Nios II - Fix I/O Macros and mini-app stubs
- -Fix asm/io.h macros
- -Eliminate use of CACHE_BYPASS in cpu code
- -Eliminate assembler warnings
- -Fix mini-app stubs and force no small data
- Patch by Scott McNutt, 08 Jun 2006
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Fix U-Boot environment sector protection on MCC200 board
+commit 9160b96f71483a116de81c68985e8ee306d36764
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:04:18 2007 +0200
-* Minor cleanup for PCS440EP board
+ Fix: Add missing NULL termination in strings expanded by macros parser.
-* Update PCS440EP port to fit into one flash device (incl. environment)
- Patch by Stefan Roese, 06 Jun 2006
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Add support for PCS440EP board
- Patch by Stefan Roese, 02 Jun 2006
+commit 630ec84aef7228fc1dbfb38dec78541403a786cd
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:03:37 2007 +0200
-* Fix examples/Makefile; some build targets were lost
+ Motion-PRO: Update EEPROM's page write bits and write delay.
-* Fix watchdog handling in CFI flash driver
- Just use udelay() when waiting for status changes which will
- implicitely trigger the watchdog.
+ Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
+ have a page write capability of two bytes", and "This device offers fast (1ms)
+ byte write". Add 3ms of extra delay.
-* Fix PCI to memory window size problems on PM82x boards
- We use the "automatic" mode that was used for the MPC8266ADS and
- MPC8272 boards. Eventually this should be used on all boards?]
- Patch by Wolfgang Grandegger, 17 Jan 2006
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
- Patch by Stefan Roese, 29 May 2006
+commit c00125e07c1ebc125bab40e1e18bceed8be0c162
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:58:45 2007 +0200
-* Update Intel IXP4xx support
- - Add IXP4xx NPE ethernet MAC support
- - Add support for Intel IXDPG425 board
- - Add support for Prodrive PDNB3 board
- - Add IRQ support
- Patch by Stefan Roese, 23 May 2006
+ MPC5XXX, Motion-PRO: Fix PHY initialization problem.
-* Fix problem in PVR detection for 440GR
- Patch by Stefan Roese, 18 May 2006
+ After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
+ networking does not function. This commit switches PHY to TX mode by clearing
+ the FX_SEL bit of Mode Control Register. It also reverses commit
+ 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
-* Fix gcc 3.4.x AFLAGS setting for m68k platform.
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Enable autoboot for M5271EVB board.
+commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:57:15 2007 +0200
-* Changed default ramdisk addr in yosemite/yellowstone ports
- Patch by Stefan Roese, 15 May 2006
+ Motion-PRO: Add support for the temperature sensor.
-* Fix PCMCIA support on virtlab2
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Add support for VirtLab2 board
- (needed because of differences in the PCMCIA hardware).
+commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:55:23 2007 +0200
-* Minor cleanup.
+ Motion-PRO: Add displaying of CPLD revision information during boot.
-* Update yosemite configuration to enable flash write buffer support
- Patch by Stefan Roese, 10 May 2006
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Fix compile warnings in common/xyzModem.c
- Patch by Stefan Roese, 10 May 2006
+commit c99512d6bd3973f01ca2fc4896d829b46e68f150
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:53:43 2007 +0200
-* Add support for AMCC 440EP Rev C and 440GR Rev B
- Patch by John Otken, 08 May 2006
+ MPC5xxx: Change names of defines related to IPB and PCI clocks.
-* OMAP 5912/OSK: update EMIFS CS1 timings:
- Problems have been seen in the linux kernel's smc91x network driver
- due to improper bus timings. The latest 2.6 OMAP kernels currently
- have a workaround, but this fix belongs in u-boot.
- Patch by Kevin Hilman, 13 Oct 2005
+ Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
+ them does not cause PCI or IPB clocks to run at the specified speed.
+ Instead, they configure divisors used to calculate said clocks. This
+ patch renames the defines according to their real function.
-* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
- Patch by Hiroki Kaminaga, 11 Mar 2006
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Update omap5912osk board support
- - Fix OMAP support that omap5912osk compiles in current source tree
- - Update with code from "http://omap.spectrumdigital.com/osk5912"
- to fix problems with DDR initialization
- - Fix timer setup
- - Use CFI flash driver and support complete 32MB of onboard flash
- - Add "print_cpuinfo()" and "checkboard()" functions to display
- CPU (with frequency) and Board infos
- Patch by Stefan Roese, 10 May 2006
+commit a11c0b85dc3664bb3c1e781137118730c8f619ab
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:51:48 2007 +0200
-* Fix watchdog issues for ColdFire boards.
+ Motion-PRO: Add LED support.
-* Add M5271EVB board support.
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
-* Make R5200 specific low level initialization board conditional.
+commit d756894722c888d09a9fa1df8323753772d3dcce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 09:49:00 2007 +0200
-* Update CPU target identification strings for ColdFire family.
+ ppc4xx: Fix small 405EZ OCM initilization bug in start.S
-* Update register definitions for MCF5271.
+ As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
+ fixes a small bug in the 405EZ OCM initialization. Thanks for
+ spotting.
-* Fix serial console support for MCF5271.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fixes for gcc 3.4 based m68k toolchain,
- based on patch by Jate Sujjavanich.
+commit 5d4a179013d59a76446462e1eb0a969fba63eb81
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 08:22:09 2007 +0200
-* Fix lowboot support on MCC200 board
+ ppc4xx: Update AMCC Acadia support for board revision 1.1
-* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
- - Removed MPC8349ADS port
- - Added PCI support to MPC8349ADS
- - reworked memory map to allow mapping of all regions with BATs
- Patch by Kumar Gala, 20 Apr 2006
+ This patch updates the Acadia (405EZ) support for the new 1.1 board
+ revision. It also adds support for NAND FLASH via the 4xx NDFC.
-* Coding Style cleanup
+ Please note that the jumper J7 must be in position 2-3 for this
+ NAND support. Position 1-2 is for NAND booting only. NAND booting
+ support will follow later.
-* Write RTC seconds first to maintain settings integrity per
- Maxim/Dallas DS1306 data sheet.
- Patch by Alan J. Luse, 02 May 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Scheduled for removal: strnicmp() which is unused
+commit 9f0077abd69f7a7c756a915b961037302be3e6f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:48:09 2007 +0200
-* Update for Intel Monahans boards:
- - support for magic key detection and handling on delta board
- - NAND support for zylonite board + some minor cleanup
+ ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
-* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
- Patch by Jon Loeliger, 01 May 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fixed handling of bad checksums with "mkimage -l"
+commit 6f3dfc139a838b0841c151efe00ad47db2366e79
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:46:10 2007 +0200
-* Added support for BC3450 board
- Patch by Stefan Strobl, 21 Oct 2005
+ ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
-* Update for NC650 board:
- - Support rev1 and rev2 hardware
- - adapt to new NAND layer
- - add CP850 configuration based on NC650
+ This patch adds support for 405 PPC's to the 4xx NAND driver
+ ndfc.c. This is in preparation for the new AMCC 405EZ.
-* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
- is configured; othrwise DMA accesses aren't cache coherent which
- causes for example USB to fail.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Some code cleanup
+commit 10603d76767426be803dadd4fb688b97eb69481c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 21 07:41:22 2007 +0200
-* Fix dbau1x00 boards broken by dbau1550 patch
- PLL:s were not set for boards other than 1550.
- Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
- Default boot is now bootp for cards other than 1550.
- Patch by Thomas Lange, 10 Aug 2005
+ ppc4xx: Fix problem in 405EZ OCM initialization
-* Fixes common/cmd_flash.c:
- - fix some compiler/parser error, if using m68k tool chain
- - optical fix for protect on/off all messages, if using more
- then one bank
- Patch by Jens Scharsig, 28 Jul 2005
+ As spotted by Bruce Adler this patch fixes an initialization problem
+ for the 405EZ OCM.
-* Fix Quad UART mapping on MCC200 board due to new HW revision
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix JFFS2 support for legacy NAND driver.
+commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 16:47:03 2007 +0100
-* Remove dependencies between DoC code and old legacy NAND driver.
+ Reduce line lengths to 80 characters max.
-* Fix PM828_PCI target, for which PCI was *not* configured in.
+commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:34:07 2007 +0100
-* Fix Lite5200B support: initialize SDelay register
- See Freescale's AN3221 "MPC5200B SDRAM Initialization and
- Configuration", 3.3.1 SDelay--MBAR + 0x0190
+ Makefile permissions
-* Changes/fixes for drivers/cfi_flash.c:
+commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:33:11 2007 +0100
- - Add Intel legacy lock/unlock support to common CFI driver
+ Makefile permissions
- On some Intel flash's (e.g. Intel J3) legacy unlocking is
- supported, meaning that unlocking of one sector will unlock
- all sectors of this bank. Using this feature, unlocking
- of all sectors upon startup (via env var "unlock=yes") will
- get much faster.
+commit 70124c2602ae2d4c5d3dba05b482d91548242de8
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed May 16 14:49:12 2007 +0200
- - Fixed problem with multiple reads of envronment variable
- "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
+ Fix compile problem cause my Microblaze merge
- - Removed unwanted linefeeds from "protect" command when
- CFG_FLASH_PROTECTION is enabled.
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
- - Changed p3p400 board to use CFG_FLASH_PROTECTION
+commit ada4697d0230d6da552867777f98a67ec3ba2579
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Wed May 16 13:23:10 2007 +0200
- Patch by Stefan Roese, 01 Apr 2006
+ [PATCH] Run new sequoia boards with an EBC speed of 83MHz
-* Changes/fixes for drivers/cfi_flash.c:
- - Correctly handle the cases where CFG_HZ != 1000 (several
- XScale-based boards)
- - Fix the timeout calculation of buffered writes (off by a
- factor of 1000)
- Patch by Anders Larsen, 31 Mar 2006
+ Because the Sequoia board does not boot with an EBC faster than 66MHz,
+ the clock divider are changed after the initial boot process.
-* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+ This allows for maximum clocking speeds to be achieved on newer boards.
+ Sequoia boards with 666.66 MHz processors require that the EBC divider
+ be set to 3 in order to start the initial boot process at a slower EBC
+ speed. After the initial boot process, the divider can be set back to 2,
+ which will cause the boards to run at 83.333MHz. This is backward
+ compatible with boards with 533.33 MHz processors, as these boards will
+ already be set with an EBC divider of 2.
- 405 SDRAM: - The SDRAM parameters can now be defined in the board
- config file and the 405 SDRAM controller values will
- be calculated upon bootup (see PPChameleonEVB).
- When those settings are not defined in the board
- config file, the register setup will be as it is now,
- so this implementation should not break any current
- design using this code.
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
- Thanks to Andrea Marson from DAVE for this patch.
+commit a7676ea7732f3c596805079fed7e5c9fac652cfc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 01:16:53 2007 +0200
- 440 DDR: - Added function sdram_tr1_set to auto calculate the
- TR1 value for the DDR.
- - Added ECC support (see p3p440).
+ Minor Coding Style cleanup, update CHANGELOG.
- Patch by Stefan Roese, 17 Mar 2006
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
-* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
- Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+commit d62f64cc23a940eafe712c776b3249e4160753d1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 00:13:33 2007 +0200
-* Add support for ymodem protocol download
- Patch by Stefano Babic, 29 Mar 2006
+ Coding Style Cleanup, new CHANGELOG
-* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
- Merge from Markus Klotzbücher's repo, 01 Apr 2006
+commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:49 2007 +0200
-* GCC-4.x fixes: clean up global data pointer initialization for all
- boards
+ ppc4xx: Add mtcpr/mfcpr access macros
-* Update for Delta board:
- - redundant NAND environment
- - misc Monahans cleanups (remove dead code etc.)
- - DA9030 Initialization; some minimal changes to PXA I2C driver to
- make it work with the Monahans.
- - Make Monahans clock frequency configurable using
- CFG_MONAHANS_RUN_MODE_OSC_RATIO and
- CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
- Merge from Markus Klotzbücher's repo, 25 Mar 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Enable Quad UART om MCC200 board.
+commit 343c48bd84606c4025c8a7c7263fda465d6e284c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:06 2007 +0200
-* Cleanup MCC200 board configuration; omit non-existent stuff.
+ ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
-* Add support for MPC859/866 Rev. A.0
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
+Author: Piotr Kruszynski <ppk@semihalf.com>
+Date: Thu May 10 16:55:52 2007 +0200
-* Fix DDR ECC bit definitions for MPC83xx.
+ [Motion-PRO] Add MTD and JFFS2 support, also add default partition
+ definition.
-* Add initial support for MPC8349E MDS board.
+commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:42:44 2007 +0100
-* Add support for ECC DDR initialization on MPC83xx.
+ Add the board directory for SMN42
-* Add DMA support for MPC83xx.
+commit 160131bf965785419626df6c388729fe0b597992
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:41:58 2007 +0100
-* Add sync in do_reset() routine for MPC83xx after RPR register
- was written to. It is need on some targets when BAT translation
- is enabled.
+ Add the files for the SMN42 board
-* Add bit definitions for MPC83xx DDR controller registers.
+commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:40:34 2007 +0100
-* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+ Remove the deleted files for the SMN42 patch
-* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:37:56 2007 +0100
-* Add support for DS1374 RTC chip.
+ New board SMN42 branch
-* Add support for Lite5200B board.
- Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 10:24:38 2007 +0100
-* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
- timer and cpu_reset code from cpu/$(CPU) into the new
- cpu/$(CPU)/$(SOC) directories
- Patch by Andreas Engel, 13 Mar 2006
+ Makefile permissions
-* Change max size of uncompressed uImage's to 8MByte and add
- CFG_BOOTM_LEN to adjust this setting.
+commit b84289b595731e8851df46e893845cc1322c9b9b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue May 8 14:17:07 2007 -0500
- As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
- uImages was restricted to 4MBytes. This default size is now
- increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
- in the board config file.
+ 8641hpcn: Fix Makefile after moving pixis to board/freescale.
- Patch by Stefan Roese, 13 Mar 2006
+ The OBJTREE != SRCTREE build scenario was broken.
+ This fixes it.
-* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
- Patch by Stefan Roese, 13 Mar 2006
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* cpu/ppc4xx/start.S : exceptions are enabled after relocation
- Patch by Cedric Vincent, 06 Jul 2005
+commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 15:57:43 2007 +0200
-* au1x00_eth.c: check malloc return value and abort if it failed
- Patch by Andrew Dyer, 26 Jul 2005
+ add: reading special purpose registers
-* Change the sequence of events in soft_i2c.c:send_ack() to keep from
- incorrectly generating start/stop conditions on the bus.
- Patch by Andrew Dyer, 26 Jul 2005
+commit 1a50f164beb065f360fbddb76029607d6b099698
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 14:52:52 2007 +0200
-* Fix bug in [id]cache_status commands for MPC85xx processors;
- should look at LSB of L1CSRn registers to determine if L1 cache is
- enabled, not the MSB.
- Patch by Murray Jensen, 19 Jul 2005
+ add: Microblaze V5 exception handling
-* Fix array overflow with fw_setenv on uninitialised environment
- Patch by Murray Jensen, 15 Jul 2005
+commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 14:39:11 2007 +0200
-* Add support for EmbeddedPlanet EP88x boards
- Patch by Yuli Barcohen, 13 Jul 2005
+ add: FSL control read and write
-* Remove board specific configuration includes from the common xilinx
- ethernet and iic adapter code.
- Patch by Michael Libeskind, 12 Jul 2005
+commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
+Author: Piotr Kruszynski <ppk@semihalf.com>
+Date: Tue May 8 13:05:44 2007 +0200
-* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
- Patch by Murray Jensen, 08 Jul 2005
+ [Motion-PRO] Add support for I2C, EEPROM and RTC.
-* Add (some) definitions for the MPC85xx local bus controller
- Patch by Murray Jensen, 08 Jul 2005
+commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 10:23:56 2007 +0200
-* Add CPM2 I/O pin functions for MPC85xx processors
- Patch by Murray Jensen, 08 Jul 2005
+ [Motion-PRO] Add ATA support. Add CF-booting commands to the default
+ environment.
+
+commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 09:39:12 2007 +0200
+
+ [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
+ eliminates networking problems in Linux (timeouts).
+
+commit 1f1369c34b629be94702684d41d3fddf0f6193e7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 09:21:57 2007 +0200
+
+ [Motion-PRO] Enable Flat Device Tree support and modify default environment
+ to allow booting of FDT-expecting kernels.
+
+commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 23:58:31 2007 +0200
+
+ new: USE_MSR_INTR support
+
+commit 008861a2f3ef2c062744d733787c7e530a1b8761
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Mon May 7 22:36:15 2007 +0200
+
+ [MPC5xxx] There are networking problems on the Motion-PRO board with
+ current PHY initalization code (tftp timeouts all the time). This commit
+ temporarily disables PHY initalization sequence to make the networking
+ operational, until a fix is found.
+
+commit abca901869c3760b6c5fecb825db6c1d91a78a93
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 7 22:10:36 2007 +0200
+
+ Get rid of duplicated file (see include/configs/sbc8560.h instead)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 7 22:07:08 2007 +0200
+
+ Get rid of duplicated file (see doc/README.SBC8560 instead)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:43:10 2007 +0200
+
+ fix: read and write MSR - repair number of parameters
+
+commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon May 7 19:42:49 2007 +0200
+
+ [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
+
+ A '3' got cut off in the formatting of the last patch to automatically
+ change the clock speed of the system clock on sequoia board.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:33:51 2007 +0200
+
+ new: fsl interrupt support
+ FSL_Has_data is connected to INTC.
+
+commit 792032baa7d625e34c981ab6df521911bd8dc861
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:30:12 2007 +0200
+
+ fix: interrupt handler
+ remove asm code
+
+commit f3f001a341ef185d0f13841be5b5dc3395aacc31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:25:08 2007 +0200
+
+ fix: remove asm code
+
+commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:12:43 2007 +0200
+
+ fix: clean interrupt
+
+commit 42efed6130c8fcf7da881385b5427065d2801757
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 17:22:25 2007 +0200
+
+ fix: interrupt handler for multiple sources
+
+commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 17:11:09 2007 +0200
+
+ new: add writing to msr register
+
+commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
+Author: Timur Tabi <timur@freescale.com>
+Date: Sat May 5 08:12:30 2007 +0200
+
+ 5xxx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date: Sun Apr 29 14:01:54 2007 +0200
+
+ [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+ MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+ message. Use PVR to distinguish between the two variants, and print proper CPU
+ information.
+
+ Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 25 16:01:26 2007 +0200
+
+ [PATCH] simplify silent console
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Mon Apr 23 15:30:39 2007 +0200
+
+ [PATCH] Avoid assigning PCI resources from zero address
+
+ If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+ core complains and IDE drivers fails to work. Also, assigning zero to a BAR
+ was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+ sentence about "0" being considered an invalid address) -- so, use a reasonable
+ starting value of 0x1000 (that's what the most Linux archs are using).
+
+ Alternatively, one might have fixed the calls to pci_set_region() individually
+ (some code even seems to have taken care of this issue) but that would have
+ been a lot more work. :-)
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon Apr 23 14:00:11 2007 +0200
+
+ [patch] setenv(...) can delete environmentalvariables
+
+ update setenv() function so that entering a NULL value for the
+ variable's value will delete the environmental variable
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 23 13:54:24 2007 +0200
+
+ [patch] use unsigned char in smc91111 driver for mac
+
+ the v_mac variable in the smc91111 driver is declared as a signed char ...
+ this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+ because when it gets printed out, you get a display like:
+ 0xFFFFFFE0 and that's no good
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ffc50f9bb194343c6303517a517708457a5eb6b8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat May 5 18:54:42 2007 +0200
+
+ new: FSL and MSR support #2
+
+commit f7e2e0eb0668136305f78bb9c21be79b48a34247
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat May 5 18:27:16 2007 +0200
+
+ new: FSL and MSR support
+
+commit 2f15278c2eb911c668b4fe562130b78cf554d139
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 18:23:11 2007 +0200
+
+ Coding stylke cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 18:05:02 2007 +0200
+
+ Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 17:15:50 2007 +0200
+
+ Make "file" command happy with some config.mk files; update CHANGELOG
+
+commit e3b8c78bc2489c27ae020986ef0eaca684866cef
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Sat May 5 08:32:14 2007 +0200
+
+ ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
+
+ The AMCC Secquoia board has been changed in a new revision from using a
+ 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
+ indicates the difference. This patch reads that bit and uses the correct
+ clock speed for the board. This code is backward compatable will all
+ prior boards. All prior boards will be read as 33.000.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 5 08:29:01 2007 +0200
+
+ ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
+
+ Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ for the 4k NAND boot image so define bus_frequency to 133MHz here
+ which is save for the refresh counter setup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a79886590593ba1d667c840caa4940c61639f18f
+Author: Thomas Knobloch <knobloch@siemens.com>
+Date: Sat May 5 07:04:42 2007 +0200
+
+ NAND: Wrong calculation of page number in nand_block_bad()
+
+ In case that there is no memory based bad block table available the
+ function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
+ nand_block_bad() directly. When parameter 'getchip' is set to zero,
+ nand_block_bad() will not right shift the offset to calculate the
+ correct page number.
+
+ Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 4 10:02:33 2007 +0200
+
+ Fix initrd length corruption in bootm command.
+
+ When using FDT Images, the length of an inital ramdisk was
+ overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
+
+ Patches by Timur Tabi & Johns Daniel.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu May 3 19:43:52 2007 -0500
+
+ mpc83xx: fix trivial error in MAKEALL
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 3 16:34:41 2007 +0200
+
+ Update board configuration for STX GP3SSA board:
+
+ Enable hush shell, environment in flash rather in EEPROM,
+ more user-friendly default environment, etc.
+ The simple EEPROM environment can be selected easily in the board
+ config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 24 14:37:49 2007 +0200
+
+ Cleanup STX GP3SSA code; fix build and compile problems.
+
+commit 35171dc04e028ecacc23ad916a66295472555dbf
+Author: Dan Malek <dan@embeddedalley.com>
+Date: Fri Jan 5 09:15:34 2007 +0100
+
+ Add support for STX GP3SSA (stxssa) Board
+
+ Signed-off-by Dan Malek, <dan@embeddedalley.com>
+
+commit ffa621a0d12a1ccd81c936c567f8917a213787a8
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sat Feb 24 01:08:13 2007 -0600
+
+ Cleaned up some 85xx PCI bugs
+
+ * Cleaned up the CDS PCI Config Tables and added NULL entries to
+ the end
+ * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
+ * Fixed 85xx PCI code to assign powar region sizes based on the
+ config values (rather than hard-coding them)
+ * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 6743105988fc44d5b0d30388c790607835aae7a6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:54:25 2007 -0500
+
+ Add support for the 8568 MDS board
+
+ This included some changes to common files:
+ * Add 8568 processor SVR to various places
+ * Add support for setting the qe bus-frequency value in the dts
+ * Add the 8568MDS target to the Makefile
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
+Author: David Updegraff <dave@cray.com>
+Date: Fri Apr 20 14:34:48 2007 -0500
+
+ Add support for treating unknown PHYs as generic PHYs.
+
+ When bringing up u-boot on new boards, PHY support sometimes gets
+ neglected. Most PHYs don't really need any special support,
+ though. By adding a generic entry that always matches if nothing
+ else does, we can provide support for "unsupported" PHYs for the
+ tsec.
+
+ The generic PHY driver supports most PHYs, including gigabit.
+
+ Signed-off-by: David Updegraff <dave@cray.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit a75af9bfd8fff0499efdbb90601cec5a2afef117
+Author: James Yang <James.Yang@freescale.com>
+Date: Wed Feb 7 15:28:04 2007 -0600
+
+ Conditionalize 8641 Rev1.0 MCM workarounds
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Apr 30 13:59:50 2007 -0500
+
+ Fix memory initialization on MPC8349E-mITX
+
+ Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
+ This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
+ on some ITX boards, notably those with a revision 3.1 CPU.
+
+ Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
+ ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Michael Benedict <MBenedict@twacs.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Apr 30 15:26:21 2007 -0500
+
+ mpc83xx: replace elaborate boottime verbosity with 'clocks' command
+
+ and fix CPU: to align with Board: display text.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c1ab82669d9525998c34e802a12cad662723f22a
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Mar 16 13:02:53 2007 -0500
+
+ Rewrote picos_to_clk() to avoid rounding errors.
+ Clarified that conversion is to DRAM clocks rather than platform clocks.
+ Made function static to spd_sdram.c.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8b39501d28754e72726ce7fb02310e56dbdf116a
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Apr 29 14:13:01 2007 +0200
+
+ ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5c5d3242935cf3543af01142627494434834cf98
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Apr 25 12:34:38 2007 -0500
+
+ mpc83xx: minor fixups for 8313rdb introduction
+
+commit 144876a380f5756f57412caf74c1d6dc201dd796
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Apr 24 23:01:02 2007 +0200
+
+ [PATCH] MTD partition support, JFFS2 support
+
+commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Apr 24 14:03:45 2007 +0200
+
+ ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:37:47 2007 -0500
+
+ Reworked 85xx speed detection code
+
+ Changed the code to read the registers and calculate the clock
+ rates, rather than using a "switch" statement.
+
+ Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 81f481ca708ed6a56bf9c410e3191dbad581c565
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:24:28 2007 -0500
+
+ Enable 8544 support
+
+ * Add support to the Makefile
+ * Add 8544 configuration support to the tsec driver
+ * Add 8544 SVR numbers to processor.h
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 17:12:25 2007 -0600
+
+ Support 1G size on 8548
+
+ e500v2 and newer cores support 1G page sizes.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 17:11:16 2007 -0600
+
+ Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
+
+ The other pagesz constants use one letter to specify order of
+ magnitude. Also change the one reference to it in mpc8548cds/init.S
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1f9a318cea14272edd10d63739e2d326c90f430e
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 16:28:46 2007 -0600
+
+ Only set ddrioovcr for 8548 rev1.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sat Feb 24 01:16:45 2007 -0600
+
+ Tweak DDR ECC error counter
+
+ Enable single-bit error counter when memory was cleared by ddr controller.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Feb 12 13:34:55 2007 -0600
+
+ 85xx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 01:44:44 2007 -0500
+
+ Some 85xx cpu cleanups
+
+ * Cleaned up the TSR[WIS] clearing
+ * Cleaned up DMA initialization
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 01:32:22 2007 -0500
+
+ Add cpu support for the 8544
+
+ Recognize new SVR values, and add a few register definitions
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 11 16:51:02 2007 -0500
+
+ Add MPC8544DS basic port board files.
+
+ Add board port under new board/freescale directory
+ structure and reuse existing PIXIS FPGA support there.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 11 16:50:57 2007 -0500
+
+ Add MPC8544DS main configuration file.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Wed Dec 27 22:07:15 2006 +0300
+
+ Fix PCI I/O space mapping on Freescale MPC85x0ADS
+
+ The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
+ 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
+ describing the local address window used for the PCI I/O space accesses -- fix
+ this and carry over the necessary changes into the MPC8560ADS code since the
+ PCI I/O space mapping was also broken for this board (by the earlier commit
+ 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
+ the PCI I/O space must be mapped to all the MPC85xx board config. headers.
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+
+ board/mpc8540ads/init.S | 4 ++--
+ board/mpc8560ads/init.S | 4 ++--
+ include/configs/MPC8540ADS.h | 5 ++---
+ include/configs/MPC8541CDS.h | 2 +-
+ include/configs/MPC8548CDS.h | 2 +-
+ include/configs/MPC8560ADS.h | 8 ++++----
+ 6 files changed, 12 insertions(+), 13 deletions(-)
+
+commit 96629cbabdb727d4a5e62542deefc01d498db6dc
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Tue Dec 5 16:42:30 2006 +0800
+
+ u-boot: Fix e500 v2 core reset bug
+
+ The following patch fixes the e500 v2 core reset bug.
+ For e500 v2 core, a new reset control register is added to reset the
+ processor.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 63247a5acd58032e6cf33f525bc3923b467bac88
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Wed Dec 20 11:01:00 2006 +0800
+
+ u-boot: v2: Remove the fixed TLB and LAW entrynubmer
+
+ Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
+ entry number to control the loop. This can reduce the potential risk
+ for the 85xx processor increasing its TLB adn LAW entry number.
+
+ Signed-off-by: Swarthout Edward <swarthout@freescale.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Mon Dec 18 17:01:04 2006 +0800
+
+ u-boot: Fix the 85xxcds tsec bug
+
+ Fix the 85xxcds tsec bug.
+ When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 7337b237ffc4aaf1b9467024fe472a880d852598
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Fri Dec 15 14:43:31 2006 +0800
+
+ u-boot: Fix CPU2 errata on MPC8548CDS board
+
+ This patch apply workaround of CPU2 errata on MPC8548CDS board.
+
+ Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
+
+commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
+Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
+Date: Mon Dec 18 16:25:15 2006 +0800
+
+ u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
+
+ This patch disables MPC8548CDS 2T_TIMING for DDR by default.
+
+ Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
+
+commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Thu Dec 14 14:14:55 2006 +0800
+
+ u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
+
+ Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
+ board.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 96b8a05432f346f36493535c85320b70ec9c7c1b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:54:15 2007 -0500
+
+ mpc83xx: Add MPC8313ERDB support.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 49ea3b6eafe606285ae4d5c378026153dde53200
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:21 2007 -0500
+
+ mpc83xx: Add generic PCI setup code.
+
+ Board code can now request the generic setup code rather than having to
+ copy-and-paste it for themselves. Boards should be converted to use this
+ once they're tested with it.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:19 2007 -0500
+
+ mpc83xx: Add 831x support to speed.c.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:18 2007 -0500
+
+ mpc83xx: Add 831x support to global_data.h
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:16 2007 -0500
+
+ mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
+
+ Rather than misleadingly define PVR_83xx as the specific type of 83xx
+ being built for, the PVR of each core revision is defined. checkcpu() now
+ prints the core that it detects, rather than aborting if it doesn't find
+ what it thinks it wants.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:15 2007 -0500
+
+ mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d87c57b201b4572d16f1b642998faa00c9912b16
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:31:55 2007 -0500
+
+ mpc83xx: Add register definitions for MPC831x.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 23 12:00:22 2007 +0200
+
+ Remove BOARDLIBS usage completely
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 32556443840f127170e4baa8bdd5b567039f6c36
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 21:07:22 2007 +0200
+
+ [PATCH] SystemACE support for Microblaze
+
+commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 21:02:40 2007 +0200
+
+ 16bit read/write little endian
+
+commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 20:53:31 2007 +0200
+
+ Change ML401 parameters - Xilinx BSP
+
+commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Feb 28 05:37:29 2007 -0600
+
+ mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Fri Jan 19 10:42:37 2007 +0800
+
+ Enable LAWs for MPC8641 PCI-Ex2.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bd7851ce1e1f140665b520026abf1042968b1102
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Apr 20 14:12:26 2007 -0500
+
+ mpc86xx; Write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7dbdf28b8bd855a8530dc3292e4982575a197060
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Apr 20 14:11:38 2007 -0500
+
+ mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 14da5f7675bbb427c469e3f45006e027b6e21db9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 20 17:43:28 2007 +0200
+
+ Cleanup compiler warnings, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6923565db12af34fd5e02d354ee65a8c78ac460f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 20 12:01:47 2007 +0200
+
+ Fix breakage of NC650 board with respect to nand support.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 39f23cd90947639ac278a18ff277ec786b5ac167
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Fri Apr 20 11:13:16 2007 +0200
+
+ [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
+
+ G2 core reference manual says decrementer and time base
+ are decreasing/increasing once every 4 bus clock cycles.
+ Lets fix it, so time in Linux won't run twice as fast
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu Apr 19 23:14:39 2007 -0400
+
+ Fix serious pointer bug with bootm and reserve map.
+
+ What was suppose to be a stack variable was declared as a pointer,
+ overwriting random memory.
+ Also moved the libfdt.a requirement into the main Makefile. That is
+ The U-Boot Way.
+
+commit d21686263574e95cb3e9e9b0496f968b1b897fdb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Apr 19 09:53:52 2007 +0200
+
+ ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
+
+ Previous versions used full wait states for the chip select #1 which
+ is connected to the Xilinix SystemACE controller on the AMCC Katmai
+ evaluation board. This leads to really slow access and therefore low
+ performance. This patch now sets up the chip select a lot faster
+ resulting in much better read/write performance of the Linux driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 37837828d89084879bee2f2b8c7c68d4695940df
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:49:29 2007 +0200
+
+ Clenaup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:20:58 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:07:26 2007 +0200
+
+ Cleanup, update CHANGELOG
+
+ Sigend-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5f6c732affea9647762d27a4617a2ae64c52dceb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 16:17:46 2007 +0200
+
+ Update CHANGELOG
+
+commit ad4eb555671d97f96dc56eab55103b1f86874b01
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 14:30:39 2007 +0200
+
+ MCC200 board: remove warning which is obsolete after PSoC firmware changes
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3747a3f010b2b1442dec3e871c69788b6017aaae
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Wed Apr 18 12:11:05 2007 +0200
+
+ [PATCH] icecube/lite5200b: document wakeup from low-power support
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+
+commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 18 12:07:47 2007 +0200
+
+ ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 18 12:05:59 2007 +0200
+
+ ppc4xx: Add output for bootrom location to 405EZ ports
+
+ Now 405EZ ports also show upon bootup from which boot device
+ they are configured to boot:
+
+ U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
+
+ CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
+ Bootstrap Option E - Boot ROM Location EBC (32 bits)
+ 16 kB I-Cache 16 kB D-Cache
+ Board: Acadia - AMCC PPC405EZ Evaluation Board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Apr 17 13:30:33 2007 +0100
+
+ Move ppearse to ARM board list
+ Add Konstantin Kletschke for scb9328.
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Mon Apr 16 14:00:13 2007 +0200
+
+ [PATCH] icecube/lite5200b: wakeup from low-power support
+
+ U-Boot part of Lite5200b low power mode support.
+ Puts SDRAM out of self-refresh and transfers control to
+ address saved at physical 0x0.
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sun Apr 15 13:54:26 2007 -0400
+
+ Fix the ft_cpu_setup() property settings.
+
+ Use "setter" functions instead of flags, cleaner and more flexible.
+ It also fixes the problem noted by Timur Tabi that the ethernet MAC
+ addresses were all being set incorrectly to the same MAC address.
+
+commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Apr 14 22:51:24 2007 -0400
+
+ Improve the bootm command for CONFIG_OF_LIBFDT
+
+ In bootm, create the "/chosen" node only if it doesn't already exist
+ (better matches the previous behavior).
+ Update for proper reserved memory map handling for initrd.
+
+commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Apr 14 22:46:41 2007 -0400
+
+ Add some utilities to manipulate the reserved memory map.
+
+commit 8048cdd56f04a756eeea4951f402bf5cc33785db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 14 21:16:54 2007 +0200
+
+ Update CHANGELOG
+
+commit 8e6875183cdca91c134408d119d4abcd48ef6856
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:56:46 2006 +0100
+
+ AVR32: Enable MMC support
+
+ Set up the portmux for the MMC interface and enable the MMC driver
+ along with support for DOS partitions, ext2 and FAT filesystems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit fc26c97bb6df41b4a95662c34054fe912387bf38
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jan 20 10:03:53 2006 +0100
+
+ Atmel MCI driver
+
+ Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
+
+ The AT91 ARM-based CPUs use basically the same hardware, so it should
+ be possible to share this driver, but no effort has been made so far.
+
+ Hardware documentation can be found in the AT32AP7000 data sheet,
+ which can be downloaded from
+
+ http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:55:37 2006 +0100
+
+ AVR32: Add clk and gpio infrastructure for mmci
+
+ Implement functions for configuring the mmci pins, as well as
+ functions for getting the clock rate of the mmci controller.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7fac3f69e9f05c5e5326681976c35d129324c4de
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:53:56 2006 +0100
+
+ Enable partition support with MMC
+
+ Include implementations of init_part() and get_partition_info() when
+ CONFIG_MMC is set.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 17:14:30 2006 +0100
+
+ AVR32: Enable networking
+
+ Implement MACB initialization for AVR32 and ATSTK1000, and turn
+ everything on, including the MACB driver.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jan 20 10:03:34 2006 +0100
+
+ Atmel MACB ethernet driver
+
+ Driver for the Atmel MACB on-chip ethernet controller.
+
+ This driver has been tested on the ATSTK1000 board with a AT32AP7000
+ CPU. It should probably work on AT91SAM926x as well with some minor
+ modifications.
+
+ Hardware documentation can be found in the AT32AP7000 data sheet,
+ which can be downloaded from
+
+ http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 16:56:14 2006 +0100
+
+ AVR32: Add clk and gpio infrastructure for macb0 and macb1
+
+ Implement functions for configuring the macb0 and macb1 pins, as
+ well as functions for getting the clock rate of the various
+ busses the macb ethernet controllers are connected to.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit d5acb95b16a0a74c643524342c3437e765426d05
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 15:39:15 2006 +0100
+
+ AVR32: Implement simple DMA memory allocator
+
+ Implement dma_alloc_coherent() which returns cache-aligned
+ uncacheable memory.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 91975b0fea773c9e681fea8cf3349669f27685ee
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 15:46:02 2006 +0100
+
+ Import <linux/mii.h> from the Linux kernel
+
+ Instead of creating yet another set of MII register definitions
+ in the macb driver, here's a complete set of definitions for everyone
+ to use.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 1b804b229556a4d862da93c0ec94e79419364b2c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Mar 21 19:47:36 2007 +0100
+
+ AVR32: Include more commands for ATSTK1000
+
+ Include the imi, imls and jffs commands sets by default on ATSTK1000.
+ Also define CONFIG_BOOTARGS to something more useful, define
+ CONFIG_BOOTCOMMAND and enable autoboot by default.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Mar 21 19:44:48 2007 +0100
+
+ AVR32: Provide a definition of struct stat
+
+ Copy the definition of struct stat from the Linux kernel.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12f099c08167a7a51aeee623bc16dafd0841271c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 14:46:06 2006 +0100
+
+ AVR32: Use initdram() instead of board_init_memories()
+
+ Conform to the "standard" interface and use initdram() instead of
+ board_init_memories() on AVR32. This enables us to get rid of the
+ sdram_size member of the global_data struct as well.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Nov 20 15:53:10 2006 +0100
+
+ AVR32: Relocate u-boot to SDRAM
+
+ Relocate the u-boot image into SDRAM like everyone else does. This
+ means that we can handle much larger .data and .bss than we used to.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df548d3c3e2bbc40258713167859ffc2ce99a900
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Nov 19 18:06:53 2006 +0100
+
+ AVR32: Resource management rewrite
+
+ Rewrite the resource management code (i.e. I/O memory, clock gating,
+ gpio) so it doesn't depend on any global state. This is necessary
+ because this code is heavily used before relocation to RAM, so we
+ can't write to any global variables.
+
+ As an added bonus, this makes u-boot's memory footprint a bit smaller,
+ although some functionality has been left out; all clocks are enabled
+ all the time, and there's no checking for gpio line conflicts.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 18:01:13 2006 +0100
+
+ AVR32: Clean up memory-map.h for at32ap7000
+
+ Convert spaces to tabs (must have missed this one last time around),
+ sort the entries by address and group them together by bus
+ connectivity.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 28c699ef69f4b6cdf252e4747b7b590028a88981
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:32:31 2006 +0100
+
+ AVR32: Build position-independent u-boot
+
+ Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
+ position independent. This will make relocation a lot easier.
+
+ -mno-init-got means that gcc shouldn't emit code to load the GOT
+ address into r6 in every function prologue. We do it once and for
+ all in the early startup assembly code, so enabling this option
+ makes u-boot a bit faster and smaller.
+
+ The assembly parts have always been position-independent, so no code
+ changes should be necessary.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:24:31 2006 +0100
+
+ AVR32: Use avr32-linux- cross-compilation prefix by default
+
+ It doesn't really matter which toolchain you use to compile u-boot,
+ but the avr32-linux one is probably what most people have installed.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:15:30 2006 +0100
+
+ AVR32: Split start_u_boot into board_init_f and board_init_r
+
+ Split the avr32 initialization code into a function to run before
+ relocation, board_init_f and a function to run after relocation,
+ board_init_r. For now, board_init_f simply calls board_init_r
+ at the end.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sat Apr 14 05:26:48 2007 +0200
+
+ [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
+ clear the Display after reset.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
+Author: Denis Peter <d.peter@mpl.ch>
+Date: Fri Apr 13 09:13:33 2007 +0200
+
+ [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
+
+ Fix bug introduced by "Fix get_partition_info() parameter error in all
+ other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
+ to use diskboot or scsiboot form another device than 0.
+
+ Signed-off-by: Denis Peter <d.peter@mpl.ch>
+
+commit 0b94504d22e70f537c17a0d38c87edb6e370977d
+Author: Greg Lopp <lopp@pobox.com>
+Date: Fri Apr 13 08:02:24 2007 +0200
+
+ [PATCH] Fix use of "void *" for block dev read/write buffer pointers
+
+ Signed-of-by: Greg Lopp <lopp@pobox.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
+Author: Xie Xiaobo <r63061@freescale.com>
+Date: Fri Mar 9 19:08:25 2007 +0800
+
+ Fix two bugs for MPC83xx DDR2 controller SPD Init
+
+ There are a few bugs in the cpu/mpc83xx/spd_sdram.c
+ the first bug is that the picos_to_clk routine introduces a huge
+ rounding error in 83xx.
+ the second bug is that the mode register write recovery field is
+ tWR-1, not tWR >> 1.
+
+commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Thu Apr 12 14:15:59 2007 +0200
+
+ ppc4xx: Fix i2c divisor calcularion for PPC4xx
+
+ This patch fixes changes the i2c_init(...) function to use the function
+ get_OPB_freq() rather than calculating the OPB speed by
+ sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
+ specific per processor. The prior method was not and so was calculating
+ the wrong speed for some PPC4xx processors.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 11 17:25:01 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 51056dd9863e6a1bc363afbbe1775c58cd967418
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 11 17:22:55 2007 +0200
+
+ Update for SC3 board
+
+ * Make IDE timeout configurable through ide_reset_timeout variable.
+ * Use Newline as "password" string
+ * Use just a single partition in NAND flash
+
+commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Mon Jan 22 12:37:30 2007 -0600
+
+ Add PIXIS FPGA support for MPC8641HPCN board.
+
+ Move the 8641HPCN's PIXIS code to the new directory
+ board/freescale/common/ as it will be shared by
+ future boards not in the same processor family.
+
+ Write a "pixis_reset" command that utilizes the FPGA
+ reset sequencer to support alternate soft-reset options
+ such as using the "alternate" flash bank, enabling
+ the watch dog, or choosing different CPU frequencies.
+
+ Add documentation for the pixis_reset to README.mpc8641hpcn.
+
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 6 14:19:43 2007 -0400
+
+ Moved fdt command support code to fdt_support.c
+
+ ...in preparation for improving the bootm command's handling of fdt blobs.
+ Also cleaned up some coding sloppiness.
-* Fix compile problem
+commit 6679f9299534e488a171a9bb8f9bb891de247aab
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 6 14:17:14 2007 -0400
-* Added PCI support for MPC8349ADS board
- Patch by Kumar Gala 11 Jan 2006
+ libfdt: Make fdt_check_header() public
-* Enable address translation on MPC83xx
- Patch by Kumar Gala, 10 Feb 2006
+ Changed _fdt_check_header() to fdt_check_header() and made it part of
+ the interface - it is a useful routine.
-* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
- Patch by Kumar Gala, 25 Jan 2006
+ Also did some asthetics cleanup to the include files (headers).
-* Fixed defines for MPC83xx SICRL register to match current specs
- Patch by Kumar Gala, 23 Jan 2006
+commit c0707ce65677650b5ceab0500ee50ae5168afef2
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:34:06 2007 +0800
-* Only disable the MPC83xx watchdog if its enabled out of reset.
- If its disabled out of reset SW can later enable it if so desired
- Patch by Kumar Gala, 11 Jan 2006
+ [Blackfin][PATCH] Kill off a bunch of common local prototypes
-* Allow config of GPIO direction & data registers at boot on 83xx
- Patch by Kumar Gala, 11 Jan 2006
+commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:33:04 2007 +0800
-* Enable time handling on 83xx
- Patch by Kumar Gala, 11 Jan 2006
+ [Blackfin][PATCH] Fix dynamic CPLB generation issue
-* Make System IO Config Registers board configurable on MPC83xx
- Patch by Kumar Gala, 11 Jan 2006
+commit 0445e3a264251d75b1be45ef713c70726a2952f0
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:31:47 2007 +0800
-* Fixed PCI indirect config ops to handle multiple PCI controllers
- We need to adjust the bus number we are trying to access based
- on which PCI controller its on
- Patch by Kumar Gala, 12 Jan 2006
+ [Blackfin][PATCH] minior cleanup
-* Report back PCI bus when doing table based device config
- Patch by Kumar Gala, 11 Jan 2006
+commit 155fd766573981090e638b493d5857562151862e
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:31:18 2007 +0800
-* Added support for PCI prefetchable region and BARs
- If a host controller sets up a region as prefetchable and
- a device's BAR denotes it as prefetchable, allocate the
- BAR into the prefetch region.
+ [Blackfin][PATCH] Fix copyright and update license
- If a BAR is prefetchable and no prefetchable region has
- been setup by the controller we fall back to allocating
- the BAR into the normally memory region.
- Patch by Kumar Gala, 11 Jan 2006
+commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:30:25 2007 +0800
-* Add helper function for generic flat device tree fixups for mpc83xx
- Patch by Kumar Gala, 11 Jan 2006
+ [Blackfin][PATCH] Add BF537 EMAC driver initialization
-* Add support for passing initrd information via flat device tree
- Patch by Kumar Gala, 11 Jan 2006
+commit 889256e8604e0c68db1d866d720894dffede9df6
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:29:55 2007 +0800
-* Added OF_STDOUT_PATH and OF_SOC
+ [Blackfin][PATCH] call real the system synchronize instruction
- OF_STDOUT_PATH specifies the path to the device the kernel can use
- for console output
+commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:29:17 2007 +0800
- OF_SOC specifies the proper name of the SOC node if one exists.
- Patch by Kumar Gala, 11 Jan 2006
+ [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
-* Allow board code to fixup the flat device tree before booting a kernel
- Patch by Kumar Gala, 11 Jan 2006
+commit dfeeab2cd680df047e68e723b246adf6f33bb556
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:28:34 2007 +0800
-* Added CONFIG_ options for bd_t and env in flat dev tree
+ [Blackfin][PATCH]: fix flash unaligned copy issue
- CONFIG_OF_HAS_BD_T will put a copy of the bd_t
- into the resulting flat device tree.
+commit 443feb740584e406efa203af909fe2926608e8d5
+Author: Igor Marnat <marny@rambler.ru>
+Date: Wed Mar 21 09:55:01 2007 +0300
- CONFIG_OF_HAS_UBOOT_ENV will copy the environment
- variables from u-boot into the flat device tree
+ Update usage of 'nc' in README.NetConsole
- Patch by Kumar Gala, 11 Jan 2006
+ Added information about usage of NetConsole on systems where the -l and -p
+ switches are mutually exclusive.
-* Add support for the DHCP vendor optional bootfile (#67).
- Ignores the vendor TFTP server name option (#66).
- Patch by Murray Jensen, 30 Jun 2005
+ Signed-off-by: Igor Marnat <marny@rambler.ru>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
- Patch by Andy Fleming, 14 Jun 2005
+commit 31c98a88228021b314c89ebb8104fb6473da4471
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 4 02:09:30 2007 +0200
-* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
- Patch by Gerhard Jaeger, 21 Jun 2005
+ Minor coding style cleanup.
-* Add netconsole and some more commands to RPXlite_DW board
- Patch by Sam Song, 19 Jun 2005
+commit 94abd7c0583ebe01e799b25f451201deeaab550d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 4 01:49:15 2007 +0200
-* Fix bad declaration on pci_cfgfunc_nothing
- Patch by Sam Song, 19 Jun 2005
+ Minor cleanup.
-* Adjust "echo" as a default command
- Patch by Sam Song, 19 Jun 2005
+commit a65c5768e5537530bd1780af3d3fddc3113a163c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 2 10:09:30 2007 +0200
-* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
- Patch by KokHow Teh, 16 Jun 2005
+ ppc4xx: Change SysACE address on Katmai
-* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
- Patch by Rick Bronson, 15 Jun 2005
+ With this new base address of the Xilinx SystemACE controller
+ the Linux driver will be easier to adapt, since it can now be
+ mapped via the "normal" ioremap() call.
-* Coding Style cleanup
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Avoid dereferencing NULL in find_cmd() if no valid commands were found
- Patch by Andrew Dyer, 13 Jun 2005
+commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 14:30:53 2007 -0400
-* Add ADI Blackfin support
- - add support for Analog Devices Blackfin BF533 CPU
- - add support for the ADI BF533 Stamp uClinux board
- - add support for the ADI BF533 EZKit board
- Patches by Richard Klingler, 11 Jun 2005
+ Fix some minor whitespace violations.
-* Add loads of ntohl() in image header handling
- Patch by Steven Scholz, 10 Jun 2005
+commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 12:23:51 2007 -0400
-* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
- variable to set clock
- Patch by Yuli Barcohen, 05 Jun 2005
+ Add a flattened device tree (fdt) command (2 of 2)
-* RPXlite configuration fixes
- - Use correct flash sector size
- - Use correct memory test end address
- - Add support for bzip2 compression
- - Various small fixes
- Patch by Yuli Barcohen, 05 Jun 2005
+ Modifications to the existing code to support the new fdt command.
-* Memory configuration changes for ZPC.1900 board
- - Fix SDRAM timing on both local bus and 60x bus
- - Add support for second flash bank (SIMM)
- - Change boot flash base
- Patch by Yuli Barcohen, 05 Jun 2005
+commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 12:22:10 2007 -0400
-* Add support for Adder boards with 16MB SDRAM;
- add support for second FEC on Adder87x board.
- Patch by Yuli Barcohen, 05 Jun 2005
+ Add a flattened device tree (fdt) command (1 of 2)
-* Fix conditional for including ks8695eth driver
- Patch by Greg Ungerer, 04 Jun 2005
+ The fdt command uses David Gibson's libfdt library to manipulate as well
+ as print the flattened device tree. This patch is the new command,
+ the second part is the modifications to the existing code.
-* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
- Patch by Friedrich Lobenstock, 02 Jun 2005
+commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 12:13:43 2007 -0400
-* Fix comment in common/soft_i2c.c
- Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
+ libfdt: Enhanced and published fdt_next_tag()
-* Cleanup compiler warnings.
- Patch by Greg Ungerer, 21 May 2005
+ Enhanced the formerly private function _fdt_next_tag() to allow stepping
+ through the tree, used to produce a human-readable dump, and made
+ it part of the published interface.
+ Also added some comments.
-* Word alignment fixes for word aligned NS16550 UART
- Patch by Jean-Paul Saman, 01 Mar 2005
+commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 12:05:39 2007 -0400
- Fixes bug with UART that only supports word aligned access: removed
- "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
- (broken!) versions of GCC generate byte accesses when encountering
- the packed attribute regardless if the struct is already correctly
- aligned for a platform. Peripherals that can only handle word
- aligned access won't work properly when accessed with byte access.
- The struct NS16550 is already word aligned for REG_SIZE = 4, so
- there is no need to packed the struct in that case.
+ libfdt: Customizations for use by u-boot.
-* Fix behaviour if gatewayip is not set
- Patch by Robin Gilks, 23 Dec 2004
+ Changes to David Gibson's original source to fit into u-boot's
+ environment. No functionality changes.
-* Fix cleanup for netstart board.
- Remove build results from repository
+commit 35748177c64a4a83a00057e93bb33e40278a2a96
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 12:00:56 2007 -0400
-* Some code cleanup for GCC 4.x
+ libfdt: Import libfdt source (2 of 2)
-* Fixes to support environment in NAND flash;
- enable NAND flash based environment for delta board.
+ This adds the applicable libfdt source files (unmodified) and a README
+ to explain where the source came from.
-* Add support for Intel Monahans CPU on Zylonite and Delta boards
- (This is Work in Progress!)
+commit 7cd5da0fe877e7171a4cdd44880bce783132871a
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Mar 31 11:59:59 2007 -0400
-* Add support for TQM8260-AI boards.
+ libfdt: Import libfdt source (1 of 2)
-* Minor code cleanup
+ This adds the applicable libfdt source files (unmodified) and a README
+ to explain where the source came from.
-* Merge the new NAND code (testing-NAND brach); see doc/README.nand
- Rewrite of NAND code based on what is in 2.6.12 Linux kernel
- Patch by Ladislav Michl, 29 Jun 2005
+commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 31 13:16:23 2007 +0200
-* Add lowboot target to mcc200 board
- Patch by Stefan Roese, 4 Mar 2006
+ ppc4xx: Update Katmai bootstrap command
-* Fix problem with flash_get_size() from CFI driver update
- Patch by Stefan Roese, 1 Mar 2006
+ Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
+ is selected.
-* Make CFG_NO_FLASH work on ARM systems
- Patch by Markus Klotzbuecher, 27 Feb 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
- use hush shell.
+commit cabee756a6532986729477c3cc1ea16ef8517ad2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 31 13:15:06 2007 +0200
-* Convert mcc200 to use common CFI flash driver
- Patch by Stefan Roese, 28 Feb 2006
+ ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
-* Add env-variable "unlock" to handle initial state of sectors
- (locked/unlocked).
+ Additional RAM information is now printed upon powerup, like
+ DDR2 frequency and CAS latency.
- Only the U-Boot image and it's environment is protected,
- all other sectors are unprotected (unlocked) if flash
- hardware protection is used (CFG_FLASH_PROTECTION) and
- the environment variable "unlock" is set to "yes".
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Patch by Stefan Roese, 28 Feb 2006
+commit 60723803431ac75cad085690789e433d5ab9174e
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 31 08:48:36 2007 +0200
-* Update drivers/cfi_flash.c:
- - find_sector() called in both versions of flash_write_cfiword()
- Patch by Peter Pearse, 27th Feb 2006
+ ppc4xx: Change Yucca config file to support ECC
-* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
- Patch by Jose Maria Lopez, 16 Jan 2006
+ With the updated 44x DDR2 driver the Yucca board now supports
+ ECC generation and checking.
-* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
- Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Changes/fixes for drivers/cfi_flash.c:
- We *should* check if there are any error bits if the previous call
- returned ERR_OK (Otherwise we will have output an error message in
- flash_status_check() already.) The original code would only check for
- error bits if flash_status_check() returns ERR_TIMEOUT.
- Patch by Marcus Hall, 23 Aug 2005
+commit 490e5730c674b20d708b783a2c5ffd7208f83873
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 31 08:47:34 2007 +0200
-* Changes/fixes for drivers/cfi_flash.c:
- - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
- - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
- Patch by Sangmoon Kim, 19 Aug 2005
+ ppc4xx: Fix "bootstrap" command for Katmai board
-* Fixes for drivers/cfi_flash.c:
- - Fix wrong timeout value usage in flash_status_check()
- - Round write_tout up when converting to msec in flash_get_size()
- - Remove clearing flash status at the end of flash_write_cfibuffer()
- which sets Intel 28F640J3 flash back to command mode on CSB472
- Patch by Tolunay Orkun, 02 July 2005
+ The board specific "bootstrap" command is now fixed and can
+ be used for the AMCC Katmai board to configure different
+ CPU/PLB/OPB frequencies.
-* Add basic support for the SMMACO4 Board from PanDaCom.
- Patch by Heiko Schocher, 20 Feb 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add GIT version information (commid ID) to untagged U-Boot versions
+commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 31 08:46:08 2007 +0200
- As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
- of all unreleased (untagged) U-Boot images will be automatically
- extended upon compiletime with a part of the GIT commit ID and
- possibly with "dirty" if uncommited changes are detected.
+ ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
- Here an example for the resulting version:
- "U-Boot 1.1.4-g3457ac18-dirty"
+ Fix a bug in the auto calibration routine. This driver now runs
+ more reliable with the tested modules. It's also tested with
+ 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
- The version is now maintained in the toplevel Makefile and the
- version headers are autogenerated.
+ Signed-off-by: Stefan Roese <sr@denx.de>
- Patch by Stefan Roese, 9 Feb 2006
+commit 342cd097be1e7affe82f42ab3da220959a699e64
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 30 22:52:09 2007 +0200
-* Update default environment for INKA4x00 board.
+ [PATCH] Clean include dependence
-* Convert CPCI750 to use common CFI flash driver
- Patch by Reinhard Arlt, 8 Feb 2006
+commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 30 22:42:45 2007 +0200
-* Various changes to esd HH405 board specific files
- Patch by Matthias Fuchs, 07 Feb 2006
+ [CLEAN] Remove inefficient Suzaku code
-* Cleanup U-Boot boot messages on ARM.
+commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 28 15:03:16 2007 +0200
- To match the U-Boot user interface on ARM platforms to the U-Boot
- standard (as on PPC platforms), some messages with debug character
- are removed from the default U-Boot build.
- Enable DEBUG for lib_arm/board.c to enable debug messages.
- New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
- Patch by Stefan Roese, 24 Jan 2006
+ Merge some AMCC make targets to keep the top-level Makefile smaller
-* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
- Patch by Stefan Roese, 18 Jan 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add VGA support (CT69000) to CPCI750 board.
- Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
- Patch by Reinhard Arlt, 30 Dec 2005
+commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 28 14:52:12 2007 +0200
-* PMC405 and CPCI405: Moved configuration of pci resources
- into config file.
- PMC405 and CPCI2DP: Added firmware download and booting via pci.
- Patch by Matthias Fuchs, 20 Dec 2005
+ i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
-* Add ColdFire targets to MAKEALL script
- Patch by Zachary Landau, 26 Jan 2006
+ The "old" i2c commands (iprobe, imd...) are now compiled in again,
+ even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
+ config option.
-* Add support for r5200 board
- Patch by Zachary Landau, 26 Jan 2006
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for Freescale M5271 processor
- Patch by Zachary Landau, 26 Jan 2006
+commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Mar 27 00:32:16 2007 +0200
-* Fix 28F256J3A support on PM520 board
- (without bank-switching only 32 MB can be accessed)
+ PATCH: Resolve GPL license problem
-* Fix mkimage bug with multifile images created on 64 bit systems.
+commit 1798049522f594013aea29457d46794298c6ae15
+Author: Michal Simek <root@monstr.eu>
+Date: Mon Mar 26 01:39:07 2007 +0200
-* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
+ Support for XUPV2P board
+ Reset support
+ BSP autoconfig support
-* Fix compiler problem with at91rm9200dk board.
- Patch by Eugen Bigz, 19 Dec 2005
+commit 0d974d5297349504a2ddfa09314be573b5df320a
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 24 15:57:09 2007 +0100
-======================================================================
-Changes for U-Boot 1.1.4:
-======================================================================
+ [PATCH] Add 4xx GPIO functions
-* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
- - Changed GPIO setup to enable another address line in order to
- address 64M of FLASH.
- - Added function sdram_tr1_set to auto calculate the tr1 value for
- the DDR.
- Patch by Steven Blakeslee, 12 Dec 2005
+ This patch adds some 4xx GPIO functions. It also moves some of the
+ common code and defines into a common 4xx GPIO header file.
-* MPC5200: Set PCI retry counter to 0 = infinite retry;
- The default of 255 is too short for slow devices.
- Patch by Martin Nykodym, 12 Dec 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Change port configuration for O2DNT (CODEC1 on PSC1).
+commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 24 15:55:58 2007 +0100
-* Fix register for PCI async mode on PPC440EP
- Patch by Youngchul Bang, 08 Dec 2005
+ [PATCH] Small Sequoia cleanup
-* Fix U-Boot linking problems (add .eh_frame segment to linker script)
- This segment may be required by some libgcc.a functions
- (like _udivdi3).
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix DPRAM offset/size for MPC8541/8555.
- Simplify TQM85xx Makefile handling.
+commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Mar 24 15:45:34 2007 +0100
-* Fix data overflow (typo?) in rtc/ds1302.c
+ [PATCH] Clean up 40EZ/Acadia support
-* Fix U-Boot compilation for MIPS boards using ELDK 4.0
+ This patch cleans up all the open issue of the preliminary
+ Acadia support.
-* Add support for TQM8541/8555 boards, TQM85xx support reworked:
- - Support for TQM8541/8555 boards added.
- - Complete rework of TQM8540/8560 support.
- - Common TQM85xx code now supports all current TQM85xx platforms
- (TQM8540/8541/8555/8560).
- - DDR SDRAM size detection added.
- - CAS latency default values can be overwritten by setting "serial#"
- to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
- If problems are detected with this non default CAS latency,
- the default values will be used instead.
- - Flash size detection added.
- - Moved FCC ethernet driver initialization behind TSEC driver init
- -> TSEC is first device.
- Patch by Stefan Roese, 30 Nov 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
- Patch by John Otken, 23 Nov 2005
+commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Dec 12 11:02:20 2006 -0600
-* Changed PPC44x startup message (cpu info, speed...) to common style:
- On PPC44x platforms, the startup message generated in "cpu.c" only
- comprised the ppc type and revision but not additional information
- like speed etc. Those speed infos where printed in the board specific
- code. This new implementation now prints all CPU infos in the common
- cpu specific code. No board specific code is needed anymore and
- therefore removed from all current 44x implementations.
- Patch by Stefan Roese, 27 Nov 2005
+ Fix 8641HPCN problem with ld version 2.16
-* Adjust TQM834x PHY addresses for latest hardware revision.
+ (Dot outside sections problem).
-* Increase malloc arena on TQM5200 board to 256 kB.
- With 64 kb uniform flash sector size the old value of 128 kB was
- too small.
+ This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
-* Fix miiphy global data initialization (problem on 4xx boards when
- no ethaddr is assigned). Initialization moved from
- miiphy_register() to eth_initialize().
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
- Based on initial patch for 4xx platform by Matthias Fuchs.
+commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Thu Dec 7 10:35:55 2006 -0600
-* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
+ Set Rev 2.x 86xx PIC in mixed mode.
-* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
- The COPYING file was extended to make clear that these files can be
- used in non-GPL code, too.
- Also, a corresponding note was placed in the headers of the affected files.
+ Prevent false interrupt from hanging Linux as MSR[EE] is set
+ to enable interrupts by changing the PIC out of the default
+ pass through mode into mixed mode.
-* Add support for Prodrive P3P440 board:
- - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- - CFG_FLASH_QUIET_TEST added to use the common CFI driver
- for bank autodetection
- Patch by Stefan Roese, 22 Nov 2005
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Change all '$(...)' variable references into '${...}'
- which makes the environment compatible with the hush shell.
- WARNING: Support for the old '$(...)' syntax will be
- discontinued in a later version.
+commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
+Author: Jason Jin <jason.jin@freescale.com>
+Date: Thu Dec 7 10:32:35 2006 -0600
-* Minor changes to init flags in TQM834x PCI.
+ Add flash cmd function to 8641HPCN ramboot
-* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
- Patch by Stefan Roese, 15 Nov 2005
+ Also fixes some commmand for 8641 HPCN ramboot case.
-* New PPC 405EP board added: CMS700
- Added CONFIG_NET_MULTI for VOM405 board.
- Added reset_phy() for VOM405 board.
- Patch by Matthias Fuchs, 09 Nov 2005
+ Signed-off-by: Jason Jin <jason.jin@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Updated PCI mapping for esd CPCI2DP board.
- Add support for error LED.
- Patch by Matthias Fuchs, 07 Nov 2005
+commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
+Author: Ed Swarthout <ed.swarthout@freescale.com>
+Date: Thu Dec 7 10:34:14 2006 -0600
-* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
- Patch by Stefan Roese, 07 Nov 2005
+ Add support for 8641 Rev 2 silicon.
-* Correct PPC Timebase register definitions (SPRN_TBRL...)
- Patch by Stefan Roese, 07 Nov 2005
+ Without this patch, I am unable to get to the prompt on rev 2 silicon.
+ Only set ddrioovcr for rev1.
-* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
- Patch by Stefan Roese, 05 Nov 2005
+ Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Additional fix for external IRQ config on Yellowstone & Yosemite
- Patch by Stefan Roese, 03 Nov 2005
+commit 44ba464b99001f8bd1c456a1e9d59726252f707a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 22 00:13:12 2007 +0100
-* Add support for Ocotea pass 3 with 440GX Rev. F
- Patch by Stefan Roese, 01 Nov 2005
+ Code cleanup / re-insert previous Copyright entries.
-* Fix external IRQ configuration on Yellowstone & Yosemite
- Patch by Stefan Roese, 28 Oct 2005
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
-* Add support for multiple PHYs.
- Tested on the following boards:
- cmcpu2 (at91rm9200/ether.c)
- PPChameleon (ppc4xx/4xx_enet.c)
- yukon (mpc8220/fec.c)
- uc100 (mpc8xx/fec.c)
- tqm834x (mpc834x/tsec.c) with EEPRO100
- lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
- Main changes include:
- common/miiphyutil.c
- - miiphy_register routine was added to allow multiple PHYs to be registered
- - miiphy_read and miiphy_write are now defined in this file, and
- require additional argument (char *devname)
- - other miiphy_* routines also require additional device name argument
- ../lib_i386/board.c
- ../lib_ppc/board.c
- Calling reset_phy() was moved to be executed *after* eth_initialize().
- This is necessary as now some of the implementations of reset_phy()
- may need to use miiphy_reset() which is not allowed before eth_initialize()
- as eth_initialize registers all required miiphy_* routines.
- Tested on IP860 and PHY initializes properly after this change.
+commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 21 23:26:15 2007 +0100
-* Correct includes for flat tree builder.
+ Code cleanup. Update CHANGELOG
-* Fix conflicting types (flash_write()) in trab auto_update.c.
+commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 21 14:54:29 2007 +0100
-* Add PCI support for the TQM834x board.
+ ppc4xx: Fix file mode of include/configs/acadia.h
-* Add missing 4xx board to MAKEALL
- Patch by Stefan Roese, 20 Oct 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix conflicting types (flash_write()) in esd auto_update.c
- Patch by Stefan Roese, 20 Oct 2005
+commit d5f4614c9350d9333e575100fb250aab774d0258
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Mar 21 14:41:46 2007 +0100
-* Fix problem with sleep in NetConsole (use get_timer())
- Patch by Stefan Roese, 20 Oct 2005
+ SPC1920: fix small clock routing bug
-* Add NetConsole Support for AMCC eval boards
- Patch by Stefan Roese, 20 Oct 2005
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
-* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
- Patch by Stefan Roese, 18 Oct 2005
+commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 21 13:39:57 2007 +0100
-* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
- Fix identation on ext2ls help entry.
- Patch by Stefan Roese, 14 Oct 2005
+ [PATCH] Add AMCC Acadia (405EZ) eval board support
-* Add support for TQM834x boards.
- Cleanup.
+ This patch adds support for the new AMCC Acadia eval board.
-* Cleanup for GCC-4.x
+ Please note that this Acadia/405EZ support is still in a beta stage.
+ Still lot's of cleanup needed but we need a preliminary release now.
-* Add documentation for Open Firmware Flat Tree and usage.
- Patch by Pantelis Antoniou, 13 Oct 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add missing files for Pantelis Antoniou's patch
- Patch by Pantelis Antoniou, 04 Sep 2005
+commit e01bd218b00af73499331a1a701625a852cd286f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 21 13:38:59 2007 +0100
-* Fix problem in ppc4xx eth-driver without ethaddr (only without
- CONFIG_NET_MULTI set)
- Patch by Stefan Roese, 10 Oct 2005
+ [PATCH] Add AMCC PPC405EZ support
-* Fix gzip bmp support (test if malloc fails, warning when truncated).
- Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
- Patch by Stefan Roese, 07 Oct 2005
+ This patch adds support for the new AMCC 405EZ PPC. It is in
+ preparation for the AMCC Acadia board support.
-* Add support for OF flat tree for the STXtc board.
- Patch by Pantelis Antoniou, 04 Sep 2005
+ Please note that this Acadia/405EZ support is still in a beta stage.
+ Still lot's of cleanup needed but we need a preliminary release now.
-* Support passing of OF flat trees to the kernel.
- Patch by Pantelis Antoniou, 04 Sep 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup
+commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Wed Mar 21 08:45:17 2007 +0100
-* Add support for NetSilicon NS7520 processor.
- Patch by Art Shipkowski, 12 May 2005
+ [PATCH] TQM8272: dont change the bits given from the HRCW
+ for the SIUMCR and BCR Register.
+ Fix the calculation for the EEprom Size
-* Add support for AP1000 board.
- Patch by James MacAulay, 07 Oct 2005
+ Signed-off-by: Heiko Schocher <hs@denx.de>
-* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
- Patch by Anders Larsen, 07 Oct 2005
+commit 654589873dbafcf104dff133ce0d03a4506e9cc3
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Tue Mar 20 18:16:24 2007 +0800
- The Atmel errata #11 states that the transfer buffer descriptor
- table must be aligned on a 16-word boundary. As it turned out, this
- is insufficient - it seems the table must be aligned on a boundary
- at least as large as the table itself (in Linux this is not an
- issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+ [Blackfin][PATCH] Add BF561 EZKIT board support
-* Fixed compilation for ARM when using a (standard) hard-FP toolchain
- Patch by Anders Larsen, 07 Oct 2005
+commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Mon Mar 19 22:55:58 2007 +0800
-* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
- sed the linker scripts, rather than pre-process them.
- Patch by Peter Pearse, 07 Oct 2005
+ [Blackfin][PATCH] minor cleanup
-* Update make target for ARM supported boards.
- Use lowlevel_init() instead of platformsetup() [rename].
- Patch by Peter Pearse, 06 Oct 2005
+commit 389b6bb50f745bf5038ce030300d8a8512e96f79
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 19 13:10:08 2007 +0100
-* Fix booting from serial dataflash on AT91RM9200
- Patch by Peter Menzebach, 29 Aug 2005
+ Remove obsoleted POST files.
-* Add JFFS2 support for TRAB board
- Patch by Martin Krause, 25 Aug 2005
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
-* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
- Patch by Marcus Hall, 24 Aug 2005
+commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Mon Mar 19 01:26:11 2007 +0800
-* Fix the machine-id of the Cogent csb637 board
- Patch by Anders Larsen, 05 Oct 2005
+ [PATCH] Add flash chip M29W320ET/B support
-* Complete support for the KwikByte KB920x boards
- Patch by Anders Larsen, 05 Oct 2005
+commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Mon Mar 19 01:24:52 2007 +0800
-* Set the AT91RM9200 clock to asynchronous mode
- Patch by Anders Larsen, 03 May 2005
+ [Blackfin][PATCH] Add BF537 stamp board support
-* Set the AT91RM9200 clock to synchronous mode
- Patch by Anders Larsen, 29 Apr 2005
+commit 8423e5e31a7235d05a482627315fb11d49c17bd7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 16 21:11:42 2007 +0100
-* Add support for Cogent csb637
- Patch by Anders Larsen, 29 Apr 2005
+ [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
-* Fix dm9161.c initialization
- Patch by Anders Larsen, 29 Apr 2005
+ Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
+ DDR memory are dynamically programmed matching the total size
+ of the equipped memory (DIMM modules).
-* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
- (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
- Patch by Anders Larsen, 29 Apr 2005
+commit 76d1466f918b881cda2d259254761e73885093c2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Mar 13 13:38:05 2007 +0100
-* Fix device partition intialization for SystemACE disks.
- Patch by Stephen Williams, 28 Apr 2005
+ [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
+ boards in terms of unification.
-* Added support for KwikByte KB920x boards (based on AT91RM9200)
- Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-* Add support for S29GL064M-R3 flash chip on xsengine board
- Patch by Kurt Stremerch, 18 Apr 2005
+commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Mar 13 16:05:55 2007 +0100
-* E500 update: repoint IVPR to RAM when code is relocated
- Patch by Kylo Ginsberg, 13 Apr 2005
+ Make SC3 board build with 'make O='; use 'addcons' consistently
+ (SC3 and Jupiter used to use 'addcon' instead).
-* Fix loop end test in lib_generic/string.c:strswab()
- Patch by Andrew Dyer, October 10, 2005
- Signed-off-by: Andrew Dyer <amdyer@gmail.com>
+ Signed-off-by: Wolfgang Denk wd@denx.de
-* Cleanup
+commit 8502e30a28e492c756ea2d7df0ace026388fce4b
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Tue Mar 13 09:40:59 2007 +0100
-* Update ARM Integrator boards:
- Correct addessing errors in platform files.
- Split off common core module data from Integrator header files to
- include/armcoremodule.h.
- Patch by Peter Pearse, 04 Oct 2005
+ [PATCH] update board config for jupiter Board:
+ added Hush Shell,
+ CONFIG_CMDLINE_EDITING,
+ CFG_ENV_ADDR_REDUND activated
-* Make sure only supported compiler options are used
- Import "cc-option" shell function from kernel and
- use it to get the correct ARM GCC options for individual CPUs
- Patch by Peter Pearse, 30 Jun 2005
+ Signed-off-by: Heiko Schocher <hs@denx.de>
-* Fix 440GR to print correct cpu revision
- Patch by Stefan Roese, 04 Oct 2005
+commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Mon Mar 12 12:11:55 2007 +0800
-* Change board message on AMCC Yosemite & Yellowstone to common style
- Patch by Stefan Roese, 03 Oct 2005
+ [Blackfin][PATCH] minor cleanup
-* Fix compiler warning
+commit bfa5754a58477ac917d21527cd0f079d87cf188e
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Mon Mar 12 01:42:06 2007 +0800
-* Fix FEC PHY addresses for TQM85xx boards
+ [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
-* Fix uninitialized variable problem in hush shell
- Patch by Lars Rostock, 26 Sep 2005
+commit 8440bb14581a294375c34b91b42512f9753d1130
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Mon Mar 12 00:25:14 2007 +0800
-* Undo change of f6e20fc6ca... to include/configs/trab.h
- (Must have been an accident?)
+ [Blackfin][PATCH] code cleanup
-* Add support for AT91RM9200 OHCI Controller.
- Patch by Eric Benard, 07 Apr 2005
+commit cfc67116a706fd18b8f6a9c11a16753c5626d689
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Mar 11 13:48:24 2007 +0100
-* Update ARM mach-types.h
- Patch by Eric Benard, 07 Apr 2005
+ [Microblaze][PATCH] part 2
+ timer support
+ interrupt controller support
+ flash support
+ ethernet support
+ cache support
+ board information support
+ env support
+ booting image support
-* Add support for MP2USB board.
- Patch by Eric Benard, 07 Apr 2005
+ adding support for Xilinx ML401
-* Add board support for armadillo HT1070
- Patch by Rowel Atienza, 06 Apr 2005
+commit 76316a318de91f6184e7c22a10e02d275ade2441
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun Mar 11 13:42:58 2007 +0100
-* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
- Patch by Vitaly Bordug, 30 Mar 2005
+ [Microblaze][PATCH]
+ timer support
+ interrupt controller support
+ flash support
+ ethernet support
+ cache support
+ board information support
+ env support
+ booting image support
-* Add iopset command on mpc8xx
- Patch by Daniel Eisenhut, 25 Mar 2005
+ adding support for Xilinx ML401
-* Add support for MII in eepro100 driver.
- Patch by Gleb Natapov, 21 Mar 2005
+commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Sat Mar 10 23:49:29 2007 +0800
-* Fixes to the Lubbock (PXA 25x) support:
- - Resolve the FIXME with respect to saving the u-boot environment.
- - Make the default load address land in real memory.
- - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
- Patch by David Brownell, 10 Mar 2005
+ [Blackfin][PATCH] code cleanup
-* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
- Patch by Marc Leeman, 04 Mar 2005
+commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date: Fri Mar 9 13:40:56 2007 +0800
-* OMAP242x H4 board update
- - fix for ES2 differences.
- - switch to using the cfi_flash driver.
- - fix SRAM build address.
- - fix for GP device operation.
- - unlock SRAM for GP devices.
- - display more device information.
- - fix potential deadlock in omap24xx_i2c driver.
- - fix DLL load values to match dpllout*1 operation.
- - fix 2nd chip select init for combo DDR device.
- - add support for CFI Intel 28F256L18 on H4 board.
- Patch by Richard Woodruff, 03 Mar 2005
+ [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
-* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
- Patch by Steven Scholz, 02 Mar 2005
+commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date: Fri Mar 9 13:38:44 2007 +0800
-* Fix typo in eth.c
- Patch by Ara Avanesyan, 24 Feb 2005
+ [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
-* Remove unneeded #include <malloc.h>
- Patch by Ladislav Michl, 22 Feb 2005
+commit 992423ab43c2bcf6b704853bd00af77450915e20
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 23:00:08 2007 +0100
-* Add cramfs support for m68k
- Patch by Zachary Landau, 21 Feb 2005
+ ppc4xx: Fix file mode of sequoia.c
-* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
- Patch by Jeff Angielski, 21 Feb 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix au1x00_serial baud rate calculation:
- remove hardcoded cpu clock divisor and use register instead;
- round up instead of truncate
- Patch by Andrew Dyer, 15 Feb 2005
+commit eb92f613556800f7483666db09d9a237ad911d4a
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Mar 8 22:52:51 2007 +0100
-* Add Xilinx Spartan3 family FPGA support
- Patch by Kurt Stremerch, 14 Feb 2005
+ Minor cleanup.
-* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
- Patch by Zachary Landau, 11 Feb 2005
+commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
+Author: John Otken john@softadvances.com <john@softadvances.com>
+Date: Thu Mar 8 09:39:48 2007 -0600
-* Fix VOH405 Support
- Patch by Matthias Fuchs, 25 Sep 2005
+ ppc4xx: Clear Sequoia/Rainier security engine reset bits
-* Added support for PCI bridge on MPC8272ADS
- Patch by Vitaly Bordug, Feb 09 2005
+ Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
-* Update multicore CM9XX support for Integrator AP to allow booting from flash
- Patch by Jean-Paul Saman, 8 Feb 2005
+commit 650a330dd2539130c8c324791e2f9f75aed79d4e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Mar 8 16:26:52 2007 +0100
-* Fix strswab() to reliably find end of string
- Patch by Andrew Dyer, 08 Feb 2005
+ [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
-* Fix typos in include/ppc440.h
- Patch by Andrew E Mileski, 04 Feb 2005
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-* Add Vibren (was Accelent) PXA255 IDP Support
- Patch by Cliff Brake, 04 Feb 2005
+commit d9fc703246840c4b268debf48c334ba55c597dc0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Mar 8 16:25:47 2007 +0100
-* Fix tools/bmp_logo.c using incorrect offset to pixel data
- Patch by Andrew Dyer, 31 Jan 2005
+ [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
-* Add ARM946E cpu and core module targets; remap memory to 0x00000000
- Patch by Peter Pearse, 2 Feb 2005
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-* Fix error handling in tools/env/fw_env.c
- Patch by Ara Avanesyan, 01 Feb 2005
+commit ced5b9029043397348cdc88e0cfcd6b1f629250b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Mar 8 16:23:11 2007 +0100
-* Fix MGT5100 PSC baudrate calculation
- Patch by Sebastian Schau, 27 Jan 2005
+ [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
-* OMAP242x fix for GP device booting
- - Add SRAM unlock for GP devices.
- - Change DDR DLL unlock value to allow DPLLout*1 operation.
- Patches by Richard Woodruff, 21 Jan 2005:
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-* Add support for AMD's Pb1x00 eval board;
- add MII routines to the au1x00 ethernet driver;
- add USB ohci driver (work in progress)
- Patch by Thomas Sailer, 20 Jan 2005
+commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Mar 8 16:20:32 2007 +0100
-* Update omap5912osk board
- Use drivers/cfi_flash.c instead of private flash driver;
- Remove hardcoded personalized settings from omap5912osk.h;
- Fix spacing with (RO) marks in 'flinfo' output.
- Patch by Michael Bendzick, 14 Jan 2005
+ [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
-* Fix warnings for PCI code on ixp
- Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-* virtex2 fix for bogus download error messages
- The virtex2 FPGA download code watches for init going active during
- a download of config data as an error condition. init also goes
- active after a configuration is finished in concert with the done
- signal. So far, the code does not check for done active until all
- of the configuration data is sent. If configuration data has a few
- extra pad bytes at the end, this would cause an error message even
- though the download had suceeded.
- NOTE: virtex2 slave serial and spartan2 versions may still have the
- same problem.
- Patch by Andrew Dyer, 12 Jan 2005
+commit f9fc6a5852a6335840882fa2111925010eea1abe
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Mar 7 15:32:01 2007 +0100
-* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
- Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
- message when probing for nonexistent flash in little endian mode.
- As a side effect more efficient and smaller code is generated,
- which is always a Good Thing (TM).
- Patch by Ladislav Michl, 24 Sep 2005
+ fixed ethernet phy configuration for plu405 board
-* Update for TFTP using a fixed UDP port
- Use the approved environment variable names. Added "tftpdstp" to
- allow ports other than 69 per Tolunay Orkun's recommendation.
- Patch by Jerry Van Baren, 12 Jan 2005
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-* Allow to force TFTP to use a fixed UDP port
- (Add a configuration option CONFIG_TFTP_PORT and optional env
- variable tftpport)
- Patch by Jerry Van Baren, 10 Jan 2005
+commit 769104c9356594deb2092e204a39c05b33202d6c
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Mar 8 21:49:27 2007 +0100
-* Fix ethernet timeouts on dbau1550 and other au1x00 systems
- Patch by Leif Lindholm, 29 Dec 2004
+ Minor cleanup
-* Cleanup: fix broken builds
+commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:13:16 2007 +0100
-* Fix PHY address argument passing with mii info command
- Patch by Andrew Dyer, 28 Dec 2004
+ [PATCH] Update AMCC Luan 440SP eval board support
-* Cleanup (PPC4xx is AMCC now)
+ The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
+ inititializition. This includes DDR auto calibration and support
+ for different DIMM modules, instead of the fixed setup used in
+ the earlier version.
-* esd CPCI2DP board added
- Patch by Matthias Fuchs, 22 Sep 2005
+ This patch also enables the cache in FLASH for the startup
+ phase of U-Boot (while running from FLASH). After relocating to
+ SDRAM the cache is disabled again. This will speed up the boot
+ process, especially the SDRAM setup, since there are some loops
+ for memory testing (auto calibration).
-* esd PMC405 board updated
- Patch by Matthias Fuchs, 22 Sep 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add SM501 support to HH405 board.
- Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
- Add support for eeprom write-enable (CFG_EEPROM_WREN).
- Patch by Stefan Roese, 22 Sep 2005
+commit 2f5df47351910a2936c7741cf111855829200943
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:10:18 2007 +0100
-* Fix autonegotiation in tsec ethernet driver
- Patch by Stefan Roese, 21 Sep 2005
+ [PATCH] Update AMCC Yucca 440SPe eval board support
-* Fix bug in auto_update (trab board)
- Patch by Martin Krause, 16 Sep 2005
+ The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
+ inititializition. This includes DDR auto calibration and support
+ for different DIMM modules, instead of the fixed setup used in
+ the earlier version.
-* Fix computation of framebuffer palette for 8bpp LCD bitmaps
- Patch by Francesco Mandracci, 16 Sep 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update configuration for INKA4x0 board
+commit 2721a68a9ea91f1e494649ce68b2577261f578e2
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:07:18 2007 +0100
-* Update configuration for PM854 board
- Based on patch by R. Loeffl, 20 Jul 2005
+ ppc4xx: Small AMCC Katmai 440SPe update
-* Add PCI support to TQM8540 and TQM8560 boards
- Patch by Stefan Roese, 15 Sep 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update AMCC Yosemite to get a consistent setup for all AMCC eval
- boards (baudrate, environment...). Flash driver fixed.
- Patch by Stefan Roese, 15 Sep 2005
+commit df294497479b1dca6dd86318b2a912f72fede0df
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 8 10:06:09 2007 +0100
-* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
- ethernet port on ebony.
- Patch by Stefan Roese, 7 Sep 2005
+ ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
-* Added support for mtddevnum and mtddevname variables (mtdparts command)
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Change default console baud rate for stxxtc board
+commit 83853178bd36bca6f0f8f1331476620c84a587fc
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Mar 7 12:14:50 2007 -0600
-* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
- Patch by Stefan Roese, 31 Aug 2005
+ net - Support ping reply when processing net-loop
-* Fix default command set (don't include CFG_CMD_DISPLAY command)
- Patch by Pantelis Antoniou, 02 Sep 2005
+ Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
-* Cleanup
+ This permits the ping command to test the phy interface when the phy
+ is put in loopback mode (typically by setting register 0 bit 14).
-* Enable SM712 driver support for HMI1001 board.
+ It also allows the port to respond to an external ping when u-boot is
+ processing some other net command (such as tftp). This is useful when
+ tftp appears to hang.
-* Fix problems with ld version 2.16 (dot outside sections problem)
- Pointed out by Gerhard Jaeger, 31 Aug 2005;
- cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
+commit fa1aef15bcd47736687be1af544506e90fba545d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 7 16:43:00 2007 +0100
-* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
+ [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
-* Add keyboard and dot matrix display support for HMI1001 board.
+ Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
+ DDR memory are dynamically programmed matching the total size
+ of the equipped memory (DIMM modules).
-* Prepare U-Boot for gcc-4.x
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fixed Bamboo port to enable running without DDR-DIMM
- (Bamboo has also 64MB onboard DDR)
- Patch by Stefan Roese, 24 Aug 2005
+commit e2ebe696818939e2b974628be9c921ea3fe9de13
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 7 16:39:36 2007 +0100
-* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
- now handling all 4xx cpu's
- Patch by Stefan Roese, 16 Aug 2005
+ [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
-* Fix make dependencies for at91rm9200 and ks8695 cpus
- Patch by Steven Scholz, 23 Aug 2005
+ This patch fixes a problem that occurs when 2 DIMM's are
+ used. This problem was first spotted and fixed by Gerald Jackson
+ <gerald.jackson@reaonixsecurity.com> but this patch fixes the
+ problem in a little more clever way.
-* Add JFFS2 support for TQM5200 board
+ This patch also adds the nice functionality to dynamically
+ create the TLB entries for the SDRAM (tlb.c). So we should
+ never run into such problems with wrong (too short) TLB
+ initialization again on these platforms.
-* Add esd cpci5200 and pf5200 boards
- Patch by Reinhard Arlt, 22 Aug 2005
+ As this feature is new to the "old" 44x SPD DDR driver, it
+ has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
-* Fix sysclock for TQM8540 and TQM8560 boards
- Patch by Martin Krause, 25 Jul 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
- Patch by Martin Krause, 08 Jun 2005
+commit 39218433983417b9df087976a79e3f80dd5e83d6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 7 16:33:44 2007 +0100
-* Add new board specific commands for TQM5200/STK52XX
- - Sound commands (beep, wav, sound)
- - Test commands (led, can, backlight, rs232)
- Patch by Martin Krause, 02 May 2005
+ UC101: fix compiler warnings
-* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
- because of a bug in the AT91RM9200 CPU PLL
- Patch by Martin Krause, 22 Apr 2005
+commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Mar 7 16:19:46 2007 +0100
-* Add automatic HW detection for another CMC_PU2 variant
- Patch by Martin Krause, 20 Apr 2005
+ HMI1001: fix build error, cleanup compiler warnings.
-* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
- Patch by Martin Krause, 19 Apr 2005
+commit ad5bb451ade552c44bef9119d907929ebc2c126f
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Mar 6 18:08:43 2007 +0100
-* Fix initialization problem on TQM5200 without SM501
- Patch by Martin Krause, 08 Apr 2005
+ Restructure POST directory to support of other CPUs, boards, etc.
-* Add RTC support for STK52XX.200
- Patch by Martin Krause, 07 Apr 2005
+commit a5284efd125967675b2e9c6ef7b95832268ad360
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Mar 6 18:01:47 2007 +0100
-* Add support for IFM o2dnt board
+ Fix HOSTARCH handling.
+ Patch by Mike Frysinger, Mar 05 2007
-* Enable PCI on hmi1001 board
+commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 6 07:47:04 2007 +0100
-* Fix return values of the jffs2 commands ls/fsload/fsinfo,
- so we can use them to, e.g., check the existence of a file with
- "if ls foo; then this; else that; fi" in the hush shell
- Patch by Andreas Engel, 16 August 2005
+ [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
-* Coding style cleanup
+ As provided by the AMCC applications team, this patch optimizes the
+ DDR2 setup for 166MHz bus speed. The values provided are also save
+ to use on a "normal" 133MHz PLB bus system. Only the refresh counter
+ setup has to be adjusted as done in this patch.
-* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
- Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+ For this the NAND booting version had to include the "speed.c" file
+ from the cpu/ppc4xx directory. With this addition the NAND SPL image
+ will just fit into the 4kbytes of program space. gcc version 4.x as
+ provided with ELDK 4.x is needed to generate this optimized code.
-* Check return value of malloc in 440gx_enet.c
- Patch by Travis B. Sawyer, 18 Jul 2005
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add Sandburst Metrobox and Sandburst Karef board support packages.
- Second serial port on 440GX now defined as a system device.
- Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
- Patch by Travis B. Sawyer, 12 Jul 2005
+commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Mar 4 01:36:05 2007 +0100
-======================================================================
-Changes for U-Boot 1.1.3:
-======================================================================
+ Some code cleanup.
-* Minor code cleanup
+commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 28 00:02:04 2007 -0600
-* Add forgotten new fils from latest VoiceBlue update
+ mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
-* Make bootretry feature work with hush shell.
- Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
- Patch by Andreas Engel, 19 Jul 2005
+ (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
-* Update Hymod Board Database PHP code in "tools" directory
- Patch by Murray Jensen, 01 Jul 2005
+commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 27 23:51:42 2007 -0600
-* Make "tr" command use POSIX compliant; export HOSTOS make variable
- Patch by Murray Jensen, 30 Jun 2005
+ mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
-* Fix Murray Jensen's mail address.
- Patch by Murray Jensen, 30 Jun 2005
+ The config value for:
+ * CFG_ACR_PIPE_DEP
+ * CFG_ACR_RPTCNT
+ * CFG_SPCR_TSEC1EP
+ * CFG_SPCR_TSEC2EP
+ * CFG_SCCR_TSEC1CM
+ * CFG_SCCR_TSEC2CM
-* Preserve PHY_BMCR during a soft reset.
- Patch by Carl Riechers, 24 Jun 2005
+ Were not being used when setting the appropriate register
-* VoiceBlue update: eeprom tool can also store firmware version now.
- eeprom.bin is runable by jumping at load address.
- Patch by Ladislav Michl, 23 May 2005
+ Added:
+ * CFG_SCCR_USBMPHCM
+ * CFG_SCCR_USBDRCM
+ * CFG_SCCR_PCICM
+ * CFG_SCCR_ENCCM
-* Move the AT91RM9200DK to the ARM Systems list.
- Patch by Anders Larsen, 26 Apr 2005
+ To allow full config of the SCCR.
-* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
- Patch by Anders Larsen, 26 Apr 2005
+ Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
+ that were just bogus.
-* measure_gclk() is needed when DEBUG is enabled
- Patch by Bryan O'Donoghue, 25 Apr 2005
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-* Add UPD-Checksum code, fix problem in net.c (return instead of break)
- Patch by Reinhard Arlt, 12 Aug 2005
+commit d51b3cf371cd441030460ef19d36b2924c361b1a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Feb 22 20:06:57 2007 -0600
-* esd PCI405 board updated
- Patch by Matthias Fuchs, 28 Jul 2005
+ mpc83xx: update [local-]mac-address properties on UEC based devices
-* esd WUH405 and DU405 board updated
- Patch by Matthias Fuchs, 27 Jul 2005
+ 8360 and 832x weren't updating their [local-]mac-address
+ properties. This patch fixes that.
-* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
- Patch by Matthias Fuchs, 4 May 2005
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-* Update AMCC Yosemite to get a consistent setup for all AMCC eval
- boards (baudrate, environment...). Flash driver fixed.
- Patch by Stefan Roese, 11 Aug 2005
+commit 61f4f912acbe60776c5e00df1ec94094ce672957
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Feb 13 10:41:42 2007 -0600
-* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
- Patch by Stefan Roese, 11 Aug 2005
+ mpc83xx: write MAC address to mac-address and local-mac-address
-* Add NAND FLASH support for AMCC Bamboo 440EP eval board
- Patch by Stefan Roese, 11 Aug 2005
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, this patch
+ updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
+ This function already updates local-mac-address.
-* Add configuration for IFM AEV FIFO board.
- Minor coding style cleanup.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Add configuration for IFM SPI eval board
+commit 22d71a71f57fd5d38b27ac3848e50d790360a598
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Feb 27 18:41:08 2007 -0600
-* Fix CompactFlash problem on HMI1001 board
+ mpc83xx: add command line editing by default
-* Make new "mtdparts" code build with older compilers
- Patch by Andrea Scian, 09 Aug 2005
+commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 14 19:50:53 2007 -0600
-* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
- CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
- with the 405 defines and the linux kernel defines.
- Patch by Stefan Roese, 08 Aug 2005
+ mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
-* Fix compiler warnings with older GCC versions
+ Disable G1TXCLK, G2TXCLK h/w buffers. This patch
+ fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
-* Add common (with Linux) MTD partition scheme and "mtdparts" command
+ Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
- Old, obsolete and duplicated code was cleaned up and replace by the
- new partitioning method. There are two possible approaches now:
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
- The first one is to define a single, static partition:
+commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
+Author: Xie Xiaobo <r63061@freescale.com>
+Date: Wed Feb 14 18:27:17 2007 +0800
- #undef CONFIG_JFFS2_CMDLINE
- #define CONFIG_JFFS2_DEV "nor0"
- #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
- #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
- #define CONFIG_JFFS2_PART_OFFSET 0x00000000
+ mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
- The second method uses the mtdparts command line option and dynamic
- partitioning:
+ The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
+ it pass DDR/DDR2 compliance tests.
- /* mtdparts command line support */
- #define CONFIG_JFFS2_CMDLINE
- #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
- #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+ Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
- Command line of course produces bigger images, and may be inappropriate
- for some targets, so by default it's off.
+commit b110f40bd180c6b560276589beedf753e97c46ce
+Author: Xie Xiaobo <r63061@freescale.com>
+Date: Wed Feb 14 18:27:06 2007 +0800
-* Fix build problems for PM856 Board
+ mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
-* Fix sign extension bug in 'fpga loadb' command;
- make 'fpga loadb' always print the file header info
- Patch by Andrew Dyer, 11 Jan 2005
+ MPC8360E rev2.0 have new spridr,and PVR value,
+ The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
-* Fix errors that occur when accessing SystemACE CF
- Patch by Jeff Angielski, 09 Jan 2005
+ Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
-* Document switching between U-Boot and PlanetCore on RPXlite
- by Sam Song, 24 Dec 2004
+commit 8d172c0f0d85998a256a95b7459a5403a30380ed
+Author: Xie Xiaobo <r63061@freescale.com>
+Date: Wed Feb 14 18:26:44 2007 +0800
-* Fix PowerQUICC II mask detection.
- Patch by Eugene Surovegin, 20 Dec 2004
+ mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
-* Add support for Altera NIOS DK1C20 board
- Patch by Shlomo Kut, 13 Dec 2004
+ MPC8349E rev3.1 have new spridr,and PVR value,
+ The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
-* Add support for ep8248 board
- Patch by Yuli Barcohen, 12 Dec 2004
+ Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
- Minor code cleanup.
+commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
+Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
+Date: Wed Jan 31 11:04:19 2007 +0100
-* Fix baudrate setting for KGDB on MPC8260
- Patch by HoJin, 11 Dec 2004
+ mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
-* Fix 'mii help' text formatting
- Patch by Cory Tusar, 10 Dec 2004
+ Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
+ which is used to se if an slave will ACK after receiving its address.
-* Fix return code of NFS command
- Patch by Hiroshi Ito, 11 Dec 2004
+ Correct i2c probing to use this method as the old method could upset
+ a slave as it wrote a data byte to it.
-* Fix typo
+ Add a small delay in i2c_init() to let the controller
+ shutdown any ongoing I2C activity.
-* Fix compiler warnings in cpu/ppc4xx/usbdev.c
- Patch by Steven Blakeslee, 04 Aug 2005
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
-* Add support for AMCC Bamboo PPC440EP eval board
- Patch by Stefan Roese, 04 Aug 2005
+commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 31 15:54:29 2007 -0600
-* Patch by Jon Loeliger
- Fix style issues primarily in 85xx and 83xx boards.
- - C++ comments
- - Trailing white space
- - Indentation not by TAB
- - Excessive amount of empty lines
- - Trailing empty lines
+ mpc83xx: Add support for the MPC8349E-mITX-GP
-* Patch by Ron Alder, 11 Jul 2005
- Add Xianghua Xiao and Lunsheng Wang's support for the
- GDA MPC8540 EVAL board.
+ Add support for the MPC8349E-mITX-GP, a stripped-down version of the
+ MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
+ HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
-* Patch by Eran Liberty
- Add support for the Freescale MPC8349ADS board.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Jon Loeliger, 25 Jul 2005
- Move the TSEC driver out of cpu/mpc85xx as it will be shared
- by the upcoming mpc83xx family as well.
+commit fab16807adad350f618024350c6950165c247c72
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jan 31 15:54:20 2007 -0600
-* Patch by Jon Loeliger, 05 May 2005
- Implemented support for MPC8548CDS board.
- Added DDR II support based on SPD values for MPC85xx boards.
- This roll-up patch also includes bugfies for the previously
- published patches:
- DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+ mpc83xx: Delete sdram_init() for MPC8349E-mITX
-* Patch by Jon Loeliger, 10 Feb 2005
- Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+ There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
+ never does anything. This patch deletes it.
-* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
- For MPC85xxCDS:
- Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
- for faster flash parts.
- Add documentation for BR/OR for FLASH.
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Jon Loeliger 08 Feb 2005
- Determine L2 Cache size dynamically on 85XX boards.
+commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Jan 19 10:43:26 2007 +0800
-* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
- - Convert the CPM2 based functionality to use new CONFIG_CPM2
- option rather than a myriad of CONFIG_MPC8560-like variants.
- Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
- Eliminates the CONFIG_MPC8560 option entirely. Distributes the
- new CONFIG_CPM2 option to each 8260 board.
+ mpc83xx: Fix the LAW1/3 bug
-* Add support for MicroSys PM856 board
- Patch by Josef Wagner, 03 Aug 2005
+ The patch solves the alignment problem of the local bus access windows to
+ render accessible the memory bank and PHY registers of UPC 1 (starting at
+ 0xf801 0000). What we actually did was to adjust the sizes of the bus
+ access windows so that the base address alignment requirement would be met.
-* Minor fixes to PM854 board
- Patch by Josef Wagner, 03 Aug 2005
+ Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
+ Signed-off-by: Gridish Shlomi <gridish@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Adjust configuration of XENIAX board
- (chip select and GPIO required for USB operation)
+commit 97c4b397dce236a7318b304667bf89e59d08b17c
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 30 16:15:31 2007 -0600
-* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
- routed to the Watchdog handler
- Patch by Eugene Surovegin, 18 Jun 2005
+ mpc83xx: don't hang if watchdog configured on 8360, 832x
-* (re)enabled scsi commands do_scsi() and do_scsiboot()
- Patch by Denis Peter, 06 Dec 2004
+ don't hang if watchdog configured on 8360, 832x
-* Fix endianess problem in TFTP / NFS default filenames
- Patch by Hiroshi Ito, 06 Dec 2004
+ The watchdog programming model is the same across all 83xx devices;
+ make the code reflect that.
-* Ignore broadcast status bit in received frames in 8260 FCC ethernet
- loopback test code
- Patch by Murray Jensen, 18 Jul 2005
+commit b70047478570e371ce7223be342ce98afea0f7d6
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 30 16:15:21 2007 -0600
-* Fix typo in mkconfig script (used == instead of =)
- Patch by Murray Jensen, 18 Jul 2005
+ mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
-* Cleanup build problems on 64 bit build hosts
+ protect memcpy to bad address if a local-mac-address is missing from dt
-* Update MAINTAINERS file
+commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 30 16:15:04 2007 -0600
-* Patch by Stefan Roese, 01 Aug 2005:
- - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
- (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
- for details.
- - Sycamore (PPC405GPr) eval board added (Walnut port is extended
- to run on both 405GP and 405GPr eval boards).
+ mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
-* Patch by Steven Blakeslee, 27 Jul 2005:
- - Add support for AMCC PPC440EP/GR.
- - Add support for AMCC Yosemite PPC440EP eval board.
- - Add support for AMCC Yellowstone PPC440GR eval board.
+ make 8360 default environment fdt be 8360 (not 8349)
-* Minor fixes for PPChameleon Board:
- - fix alignment of NAND size
- - make code do what the comment says
+commit a28899c910024a0226331df07207b1038c300c93
+Author: Emilian Medve <Emilian.Medve@freescale.com>
+Date: Tue Jan 30 16:14:50 2007 -0600
-* Implement h/w sector protection status synchronization at boot.
- The code is provided for, and was tested on, the Yukon/Alaska
- and PM520 boards only.
+ mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
- A bug in flash_real_protect() for the Yukon board was fixed by
- adding a function that tells if two banks are on one flash chip.
+ The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
+ be used for busy-waiting since it strips the 'volatile' property from
+ the bd variable. gcc3 was working by pure luck.
-* Fix sysmon POST problem: check I2C error codes
- This fixes a problem of displaying bogus voltages when the voltages
- are so low that the I2C devices start failing while the rest of the
- system keeps running.
+ This is a follow on patch to "Fix the UEC driver bug of QE"
-* Patch by Cedric Vincent, 6 Jul 2005:
- Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jan 30 14:08:30 2007 -0600
-* Patch by Jon Loeliger, 20 Jul 2005:
- Add missing PCI IO port definitions.
+ mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
-* Add CompactFlash support for HMI1001 board.
+ The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
+ MPC834X class processors. Change the protections from CONFIG_MPC8349 to
+ CONFIG_MPC834X so they are more generic.
-* Adjust printed board ID for LWMON board.
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jan 25 13:40:55 2007 -0600
-* Add new argument format for flash commands to allow for usage like
- "erase $(addr) +$(filesize)", i. e. a size argument can be used and
- U-Boot will automaticially find the end of the corresponding sector.
+ mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
-* Patch by Stefan Roese, 5 Jul 2005:
- Update uc100 board PHY setup
+commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jan 24 17:18:37 2007 -0600
-* Patch by Stefan Roese, 1 Jul 2005:
- Fix PHY address for CATcenter board (now correct!)
+ mpc83xx: sort Makefile targets
-* Patch by Stefan Roese, 30 Jun 2005:
- Fix PHY addresses for PPChameleon and CATcenter boards
- Change MAINTAINER for most esd boards
+ reordered targets alphabetically
-* Patch by Detlev Zundel, 30 Jun 2005:
- Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+commit 91e25769771c1164ed63ffca0add49f934ae3343
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Tue Jan 16 11:38:14 2007 -0500
-* Fix baudrate calculation problem on MPC5200 systems
+ mpc83xx: U-Boot support for Wind River SBC8349
-* Add EEPROM and RTC support for HMI1001 board
+ I've redone the SBC8349 support to match git-current, which
+ incorporates all the MPC834x updates from Freescale since the 1.1.6
+ release, including the DDR changes.
-* Patch by Detlev Zundel, 20 Jun 2005:
- Fix initialization of low active GPIO pins on inka4x0 board
+ I've kept all the SBC8349 files as parallel as possible to the
+ MPC8349EMDS ones for ease of maintenance and to allow for easy
+ inspection of what was changed to support this board. Hence the SBC8349
+ U-Boot has FDT support and everything else that the MPC8349EMDS has.
-* Enable redundant environment, disable HW flash protection of
- HMI1001 board
+ Fortunately the Freescale updates added support for boards using CS0,
+ but I had to change spd_sdram.c to allow for board specific settings for
+ the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
+ default if the board doesn't specify a value.)
-* Patch by Travis Sawyer, 10 Jun 2005:
- Initialize allocated dev and private hw structures
- after their respective allocation in 440gx_enet.c
+ Hopefully this should be mergeable as-is and require no whitespace
+ cleanups or similar, but if something doesn't measure up then let me
+ know and I'll fix it.
-* Patch by Steven Scholz, 10 Jun 2005:
- Fix byteorder problems with second argument of "bootm" with
- standalone images;
+ Thanks,
+ Paul.
-* Add support for HMI1001 board
+commit 05031db456ab227f3e3752f37b9b812b65bb83ad
+Author: Sam Song <samsongshu@yahoo.com.cn>
+Date: Thu Dec 14 19:03:21 2006 +0800
-* Disable "date" and "sntp" commands on TQM866M
+ mpc83xx: Remove a redundant semicolon in mpc8349itx.c
-* Fix watchdog reset problems on LWMON board
+ A redundant semicolon existed in mpc8349itx.c
+ should be removed.
-* Patch by Juergen Selent, 17 May 2005:
- Add support for Funkwerk VoVPN gateway module.
+ Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
-* Cleanup debug code for MPC8220 FEC driver
+commit f35f358241c549be3f75cfe2eaa642914275b7ba
+Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
+Date: Wed Dec 6 21:23:55 2006 -0500
-* Extend burst mode RAM test program to take a loop count
- (0 = infinite)
+ mpc83xx: Put the version (and magic) after the HRCW.
-* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
- those boards that use it.
+ Put the version (and magic) after the HRCW. This puts it in a fixed
+ location in flash, not at the start of flash but as close as we can get.
-* Patches by Greg Ungerer, 19 May 2005:
- - add support for the KS8695P (ARM 922 based) CPU
- - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+ Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
-* Patch by Steven Scholz, 19 May 2005:
- Add support for CONFIG_SERIAL_TAG on ARM boards
+commit 48aecd969171a6e99a55fae04933857787f9a5bd
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Dec 7 21:14:51 2006 +0800
-* Add PCI support for Sorcery board.
- Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+ mpc83xx: Add the MPC832XEMDS board readme
-* Fix compile problems caused by new burst mode SDRAM test;
- make port pins to trigger logic analyzer configurable
+ Add the MPC832XEMDS board readme
-* Fix timer handling on MPC85xx systems
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Fix debug code in omap5912osk flash driver
+commit 24c3aca3f1358b113d3215adb5433b156e99f72b
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Dec 7 21:13:15 2006 +0800
-* Add support for MPC8247 based "IDS8247" board.
+ mpc83xx: Add support for the MPC832XEMDS board
-* Add support for 2 x TSEC interfaces on the TQM8540 board.
+ This patch supports DUART, ETH3/4 and PCI etc.
-* On LWMON we must use the watchdog to reset the board as the CPU
- genereated HRESET pulse is too short to reset the external
- circuitry.
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Add test tool to exercise SDRAM accesses in burst mode
- (as standalone program, MPC8xx/PowerPC only)
+commit e080313c32322e15ab5a18eb896a252858c57284
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Dec 7 21:11:58 2006 +0800
-* Increase CFG_MONITOR_LEN for Rattler board to match actual code
- size.
+ mpc83xx: streamline the 83xx immr head file
-* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
- March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
- added to support LZO and LZARI compression modes (undefined by
- default).
+ For better format and style, I streamlined the 83xx head files,
+ including immap_83xx.h and mpc83xx.h. In the old head files, 1)
+ duplicated macro definition appear in the both files; 2) the structure
+ of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
+ macro definition put inside the each structure. So, I cleaned up the
+ structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
+ moved the macro definition to mpc83xx.h, Just like MPC8260.
-* Fix problem with symbolic links in JFFS2 code.
+ CHANGELOG
-* Use linker ASSERT statement to prevent undetected overlapping of
- sections on PPChameleon board; other boards might use this, too.
+ *streamline the 83xx immr head file
-* Patch by Stefan Roese, 03 May 2005:
- Update for P3G4
- Fix problems in cmd_universe.c
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Patch by Matthias Fuchs, 03 May 2005:
- Added missing variable declaration in cmd_nand.c
- Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Dec 6 11:38:17 2006 +0800
-* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+ mpc83xx: Fix the UEC driver bug of QE
-* Fix bug in the SDRAM initialization code for canmb, IceCube and
- PM520 boards.
- Fix PHY address for canmb board.
+ The patch prevents the GCC tool chain from striping useful code for
+ optimization. It will make UEC ethernet driver workable, Otherwise the
+ UEC will fail in tx when you are using gcc4.x. but the driver can work
+ when using gcc3.4.3.
-* Cleanup serial console baudrate calculation on AT91RM9200;
- get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+ CHANGELOG
-* Patch by Matthias Fuchs, 18 Apr 2005:
- Make PCI target address spaces on PMC405 and CPCI405 boards
- configurable via environment variables
+ *Prevent the GCC from striping code for optimization, Otherwise the UEC
+ will tx failed when you are using gcc4.x.
-* Auto-size RAM on canmb board.
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Add support for canmb board
+commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 1 21:11:36 2007 +0100
-* Patch by Stefan Roese, 13 Apr 2005:
- Update for esd apc405
+ [PATCH] Update AMCC Katmai 440SPe eval board support
-* Fixes for TQM8560 board:
- - fix clock rates
- - remove debug messages
- - fix flash sector protection
+ This patch updates the recently added Katmai board support. The biggest
+ change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
+ driver.
-* Patch by Steven Scholz, 07 Apr 2005:
- Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+ Please note, that still some problems are left with some memory
+ configurations. See the driver for more details.
-* Patches by Steven Scholz, 07 Apr 2005:
- Fix compiler warning in altera.c
- Fix warning in cpu/arm920t/at91rm9200/i2c.c
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Ladislav Michl, 06 Apr 2005:
- Fix voiceblue configuration.
+commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 1 07:03:25 2007 +0100
-* Patch by Stefan Roese, 06 Apr 2005:
- Updates for OCOTEA board:
- - Changed U-Boot size from 512kByte to 256kByte
- - Fixed flash driver to support boot from soldered user flash
- - Added README for switch from PIBS firmware to U-Boot
+ [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
-* Patch by Travis Sawyer, 05 Apr 2005:
- - Change timer frequency for ppc 440 from 10 ms to 1 ms.
- Problem found by Andrew Wozniak.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Steven Scholz, 06 Apr 2005:
- - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
- - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+commit ccbc7036648e465697ca298ba51e0e76dda352a0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Feb 28 01:28:53 2007 +0100
-* Patches by Robert Whaley, 29 Nov 2004:
- - update the pxa-regs.h file for PXA27x chips
- - add PXA27x based ADSVIX board
- - add support for MMC on PXA27x processors
+ SC3: fix typo in default environment
-* Patch by Andrew E. Mileski, 28 Nov 2004:
- Fix PPC4xx SPD SDRAM detection bug
+commit e344568b1b46af85ec32d815586f91bc115d6223
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Feb 27 20:15:30 2007 +0300
-* Patch by Hiroshi Ito, 26 Nov 2004:
- Fix logic of "test -z" and "test -n" commands
+ MCC200: Fixes for update procedure
-* Patch by Ladislav Michl, 05 Apr 2005:
- Add support for VoiceBlue board.
+ - fix logic error in image type handling
+ - make sure file system images (cramfs etc.) get stored in flash
+ with image header stripped so they can be mounted through MTD
-* Patch by Ladislav Michl, 05 Apr 2005:
- Fix netboot_common() prototypes.
+commit 743571145b37182757d4e688a77860b36ee77573
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Feb 27 14:26:04 2007 +0100
-* Patch by Steven Scholz, 05 Apr 2005:
- Use i.MX watchdog timer for reset_cpu()
+ Minor code cleanup.
-* Patch by Steven Scholz, 05 Apr 2005:
- Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
- subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
- (now in interupts.c)
+commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Feb 27 12:40:16 2007 +0300
-* Add support for MPC8220 based "sorcery" board.
+ MCC200 update - add LCD Progress Indicator
-* Add support for TQM8560 board.
+commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 22 07:43:34 2007 +0100
-* Add FEC support for TQM8540 board.
- Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+ [PATCH] get_dev() now unconditionally uses manual relocation
-* Patch by Martin Krause, 04 Apr 2005:
- Update default configuration for CMC_PU2 board.
+ Since the relocation fix is not included yet and we're not sure how
+ it will be added, this patch removes code that required relocation
+ to be fixed for now.
-* Patch by Steven Scholz, 04 Apr 2005:
- - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- - introduce two new configuration options instead:
- CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Steven Scholz, 04 Apr 2005:
- Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 22 07:40:23 2007 +0100
-* Fix timer code for ARM systems: make sure that udelay() does not
- reset timers so it's save to use udelay() in timeout code.
+ [PATCH] Change systemace driver to select 8 & 16bit mode
-* Patch by Mathias Küster, 23 Nov 2004:
- add udelay support for the mcf5282 cpu
+ As suggested by Grant Likely this patch enables the Xilinx SystemACE
+ driver to select 8 or 16bit mode upon startup.
-* Patch by Tolunay Orkun, 16 November 2004:
- fix incorrect onboard Xilinx CPLD base address
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Jerry Van Baren, 08 Nov 2004:
- - Add low-boot option for MPC8260ADS board (if lowboot is selected,
- the jumper for the HRCW source should select flash. If lowboot is
- not selected, the jumper for the HRCW source should select the
- BCSR.
- - change default load base address to 0x00400000
+commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Feb 21 16:52:31 2007 +0100
-* Patch by Yuli Barcohen, 08 Nov 2004:
- Add support for Analogue & Micro Rattler boards.
- Tested on Rattler8248.
+ [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
-* Patch by Andre Renaud, 08 Nov 2004:
- Fix watchdog support in common/lcd.c
+ Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
+ is fully finished. The sync() is defined in each CPU's io.h file. For
+ those CPUs which do not need sync for now, a dummy sync() is defined in
+ their io.h as well.
-* Patch by Marc Leeman, 05 Nov 2003:
- Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
- bug only affects the XPC8245 processors
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Patches by Josef Wagner, 29 Oct 2004:
- - Add support for MicroSys CPU87 board
- - Add support for MicroSys PM854 board
+commit da04995c7dc6772013a9a0dc5c767f190c402478
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 21 13:44:34 2007 +0100
-* Patch by Jian Zhang, 02 Nov 2004:
- Add 16-bit NAND support
+ [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
-* Patch by Scott McNutt, 01 Nov 2004:
- Add missing NIOS/NIOS2 support for "iminfo" command
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Detlev Zundel, 29 Oct 2004:
- Add missing NIOS/NIOS2 support for "mkimage" tool.
+commit 751bb57107d78978ae08e697c3deba816f5be091
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 13:21:57 2007 +0100
-* Patch by David Adair, 27 Oct 2004:
- Add missing 440GX SDRAM Controller reset
+ [PATCH] Fix relocation problem with "new" get_dev() function
-* Patch by Steven Scholz, 25 Oct 2004:
- Declare reset_cpu() in include/common.h instead locally
+ This patch enables the "new" get_dev() function for block devices
+ introduced by Grant Likely to be used on systems that still suffer
+ from the relocation problems (manual relocation neede because of
+ problems with linker script).
-* Patch by Yusdi Santoso, 22 Oct 2004:
- - Add support for HIDDEN_DRAGON board
- - fix endianess problem in driver/rtl1839.c
+ Hopefully we can resolve this relocation issue soon for all platform
+ so we don't need this additional code anymore.
-* Patch by Allen Curtis, 21 Oct 2004:
- support multiple serial ports
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Richard Klingler, 03 Apr 2005:
- Add call to eth_halt() in net/net.c when called functions fail
- after eth_init() has been called.
+commit d93e2212f962668b3dce091ff5edc33f2347fe37
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 13:17:42 2007 +0100
-* Patch by Sam Song, 3 April 2005:
- - Update README.Netconsole
- - Update README
+ [PATCH] Update SystemACE driver for 16bit access
-* Prepare for SoC rework of ARM code:
- - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
- - rename memsetup into lowlevel_init (function name and source files)
- Patch by Steven Scholz, 03 Apr 2005:
- - create SoC specific directories include/asm-arm/arch-imx and
- include/asm-arm/arch-s3c24x0
+ This patch removes some problems when the Xilinx SystemACE driver
+ is used with 16bit access on an big endian platform (like the
+ AMCC Katmai).
-* Fix problems with SNTP support;
- enable SNTP support in some boards.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patches by Martin Krause, 01 Apr 2005:
- - Fix flash erase timeout on CMC_PU2
- - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 13:15:40 2007 +0100
-* Patch by Steven Scholz, 13 March 2005:
- fix cache enabling for AT91RM9200
+ [PATCH] Clean up Katmai (440SPe) linker script
-* Patch by Masami Komiya, 30 Mar 2005:
- add SNTP support and expand time server and time offset fields of
- DHCP support. See doc/README.SNTP
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Steven Scholz, 13 Dec 2004:
- Fix bug in at91rm920 ethernet driver
+commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:57:08 2007 +0100
-* Patch by Steven Scholz, 13 Dec 2004:
- Remove duplicated code by merging memsetup.S files for
- at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+ [PATCH] Add support for the AMCC Katmai (440SPe) eval board
-* Patch by Detlev Zundel, 31 Mar 2005:
- Cleanup duplicate definition of overwrite_console()
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Update TQM5200 configuration;
- prepare for Rev. 200 starter kit boards
+commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:51:26 2007 +0100
-* Patch by Scott McNutt, 21 Oct 2004:
- Add support for Nios-II EPCS Controller core.
+ [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
-* Patch by Scott McNutt, 20 Oct 2004:
- Nios-II cleanups:
- - Add sysid command (Nios-II only).
- - Locate default exception trampoline at proper offset.
- - Implement I/O routines (readb, writeb, etc)
- - Implement do_bootm_linux
+ This patch switches to the desired I2C bus when the date/dtt
+ commands are called. This can be configured using the
+ CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
-* Patches by Martin Krause, 22 Mar 2005:
- - use TQM5200_auto as MAKEALL target for TQM5200 systems
- - add support for SM501 graphics controller
- - add support for graphic console on TQM5200
- - add support for TQM5200 Rev 200
- - cleanup, fix typo in include/configs/TQM5200.h
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Manfred Baral, 17 Mar 2005:
- Fix typo
+commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:43:34 2007 +0100
-* Fix RTC configuration for PPChameleon board
+ [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
-* Cleanup, fix typo in include/configs/TQM5200.h
+ This patch adds support for the DDR2 controller used on the
+ 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
+ board and works fine with the following DIMM modules:
-* Patch by Stefan Roese, 16 Mar 2005:
- Update for esd auto_update and hh405 board
+ - Corsair CM2X512-5400C4 (512MByte per DIMM)
+ - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
+ - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
-* Adapt for U-Boot image size (new features enabled) on TQM5200
+ This patch also adds the nice functionality to dynamically
+ create the TLB entries for the SDRAM (tlb.c). So we should
+ never run into such problems with wrong (too short) TLB
+ initialization again on these platforms.
-* Update code for TQM8540 board (and 85xx in general):
- - Change the name of the Ethernet driver: MOTO ENET -> ENET
- - Reformat boot messages
- - Enable redundant environment
- - Replace the -O2 optimization flag with -mno-string
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by David Brownell, 10 Mar 2005:
- Restore copyright statements in OHCI drivers.
+commit 36d830c9830379045f5daa9f542ac1c990c70068
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:35:42 2007 +0100
-* Add support for TQM8540 board
+ [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
-* Patch by Detlev Zundel, 14 Mar 2005:
- NC650: changed NAND flash addressing to using UPMB
+ Since the existing 4xx SPD SDRAM initialization routines for the
+ 405 SDRAM controller and the 440 DDR controller don't have much in
+ common this patch splits both drivers into different files.
-* Patch by Stefan Roese, 14 Mar 2005:
- Update for esd voh405 fpga image
+ This is in preparation for the 440 DDR2 controller support (440SP/e).
-* INKA4x0: Allow initialization of LCD backlight dimming from
- "brightness" environment variable.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Add port initialization for digital I/O on INKA4x0
+commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:27:08 2007 +0100
-* Patch by Stefan Roese, 01 Mar 2005:
- Update for esd boards dp405 and hub405
+ [PATCH] PPC4xx: Add support for multiple I2C busses
-* Fix get_partition_info() parameter error in all other calls
- (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+ This patch adds support for multiple I2C busses on the PPC4xx
+ platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
+ to make use of this feature.
-* Enable USB and IDE support for INKA4x0 board
+ It also merges the 405 and 440 i2c header files into one common
+ file 4xx_i2c.h.
-* Patch by Andrew Dyer, 28 Feb 2005:
- fix ext2load passing an incorrect pointer to get_partition_info()
- resulting in load failure for devices other than 0
+ Also the 4xx i2c reset procedure is reworked since I experienced
+ some problems with the first access on the 440SPe Katmai board.
-* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup USB and partition defines
+commit eb867a76238fb38e952c37871b16d0d7fd61c95f
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:45 2007 +0100
-* Add support for ext2 filesystems and image timestamps to TQM5200 board
+ [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
-* Add reset code for Coral-P on INKA4x0 board
+ Block device read/write is anonymous data; there is no need to use a
+ typed pointer. void * is fine. Also add a hook for block_read functions
-* Patch by Martin Krause, 28 Jun 2004:
- Update for TRAB board.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Fix some missing "volatile"s in MPC5xxx FEC driver
+commit 53758fa20e935cc87eeb0519ed365df753a6f289
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:38 2007 +0100
-* Fix cirrus voltage detection (for CPC45)
+ [PATCH 8_9] Add block_write hook to block_dev_desc_t
-* Fix byteorder problem in usbboot and scsiboot commands.
+ Preparation for future patches which support block device writing
-* Patch by Cajus Hahn, 04 Feb 2005:
- - don't insist on leading '/' for filename in ext2load
- - set default partition to useful value (1) in ext2load
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patch by Andrew Dyer, 08 Jan 2005:
- fix wrong return codes in ext2 code
+commit f4852ebe6ca946a509667eb68be42026f837be76
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:31 2007 +0100
-* Removed '--no-warn-mismatch' option from Makefile. This option
- makes 'ld' to overlook binary objects compatibility.
+ [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
-* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
- --end-group) outside of the group. This will make 'ld' to do
- _multiple_ search in the library group when resolving symbol
- references and do only a _single_ seach in libgcc.a after the group
- search.
+ Register read/write does not need to be wrapped in a full function. The
+ patch replaces them with macros.
-* Fix stability problems on CPC45 board again.
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Make image detection for diskboot / usbboot / scsiboot more robust
- (also check header checksum)
+commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:23 2007 +0100
-* Update CPC45 board configuration.
+ [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
-* Add USB and PCI support for INKA4x0 board
+ The code in this file is not a command; it is a device driver. Put it in
+ the correct place. There are zero functional changes in this patch, it
+ only moves the file.
-* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Code cleanup
+commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:16 2007 +0100
-* Patch by Robin Getz, 13 Oct 2004:
- Add standalone application to change SMC91C111 MAC addresses,
- see examples/README.smc91111_eeprom
+ [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
-* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
- Fix Flash support for ARM Integrator CP.
+ This patch is in preparation of additional changes to the sysace driver.
+ May as well take this opportunity to fixup the inconsistent whitespace since
+ this file is about to undergo major changes anyway.
-* Patch by Richard Woodruff, 10 Jan 2005:
- Update support for OMAP2420 (ARM11) and H4 board:
- o clean up and add new types to H4 memory probe code.
- o fix to work with internal boot.
- o added PRCM config III operation.
- o fix marginal flash timings.
- o add revison ATAG usage.
- o enable voltage scaling at power chip.
- o fix compile error for i2c.
+ There are zero functional changes in this patch. It only cleans up the
+ the whitespace.
-* Fix network problem (error when receiving multiple ARP packets)
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patch by Daniel Poirot, 12 Oct 2004:
- Add support for Wind River sbc405 board
+commit 80ba981d940471fe7e539e64fa3d2bd80002beda
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:07 2007 +0100
-* Patch by Rainer Brestan, 12 Oct 2004:
- Make examples/Makefile more robust
+ [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
-* Patch by Sam Song, 11 October 2004:
- - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
- - Adjust CPU:BUS frequency ratio 1:1 when core frequency
- less than 50MHz
+ isprint is already defined in ctype.c
-* Patch by Sam Song, 10 Oct 2004:
- Fix a parameter error in run_command() in main.c
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patch by Richard Woodruff, 01 Oct 2004:
- add support for the TI OMAP2420 processor and its H4 reference
- board
+commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:00 2007 +0100
-* Patch by Christian Pellegrin, 24 Sep 2004:
- Added support for NE2000 compatible (DP8390, DP83902) NICs.
+ [PATCH 3_9] Move buffer print code from md command to common function
-* Patch by Leif Lindholm, 23 Sep 2004:
- add support for the AMD db1550 board
+ Printing a buffer is a darn useful thing. Move the buffer print code
+ into print_buffer() in lib_generic/
-* Patch by Travis Sawyer, 15 Sep 2004:
- Add CONFIG_SERIAL_MULTI support for ppc4xx,
- update README.serial_multi
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patches by David Snowdon, 07 Sep 2004:
- - add u-boot.hex target in the top level Makefile
- - add support for the UNSW/NICTA PLEB 2 board (pleb2)
- - use -mtune=xscale and -march=armv5 options for PXA
+commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:04:52 2007 +0100
-* Patch by Florian Schlote, 08 Sep 2004:
- Add support for SenTec-COBRA5272-board (ColdFire).
+ [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
-* Patch by Gleb Natapov, 07 Sep 2004:
- mpc824x: set PCI latency timer to a sane value
- (is 0 after reset).
+ Change the xilinx device drivers and board code to include config.h
+ instead of xparameters.h directly. config.h always includes the
+ correct xparameters file. This change reduces the posibility of
+ including the wrong file when adding a new xilinx board port
-* Patch by Kurt Stremerch, 03 Sep 2004:
- Add bitstream configuration option for fpga command (Xilinx only).
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patch by Kurt Stremerch, 03 Sep 2004:
- Add Xilinx Spartan2E family FPGA support
+commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:04:34 2007 +0100
-* Patch by Jeff Angielski, 02 Sep 2004:
- Add Added support for H2 revision of the EP8260 board.
- Fixed formatting for some of the EP8260 related source files.
+ [PATCH 1_4] Merge common get_dev() routines for block devices
-* Patch by Jon Loeliger, 02 Sep 2004:
- Reset monitor size back to 256 so environment can be written
- to flash on MPC85xx ADS and CDS releases.
+ Each of the filesystem drivers duplicate the get_dev routine. This change
+ merges them into a single function in part.c
-* Patch by Paolo Broggini, 02 Sep 2004:
- Make BSS clearing on ARM systems more robust
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patch by Yue Hu and Joe, 01 Sep 2004:
- - add PCI support for ixp425;
- - add EEPRO100 suppor tfor ixdp425 board.
+commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Feb 19 23:09:51 2007 +0100
-* Fix problem with protected sector detection in driver/cfi_flash.c
+ MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
+ as root file system images.
-======================================================================
-Changes for U-Boot 1.1.2:
-======================================================================
+commit 489c696ae7211218961d159e43e722d74c36fcbc
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed Feb 14 14:30:28 2007 +0300
-* Code cleanup, mostly for GCC-3.3.x
+ MCC200: Extensions to Software Update Mechanism
-* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
- pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
- additional ethernet addresses.
+ Update / extend Software Update Mechanism for MCC200 board:
-* Cleanup drivers/i82365.c - avoid duplication of code
+ - Add support for rootfs image added. The environment variables
+ "rootfs_st" and "rootfs_nd" can be used to override the default
+ values of the image start and end.
+ - Remove excessive key check code.
+ - Code cleanup.
-* Fix bogus "cannot span across banks" flash error message
+commit 4be23a12f23f1372634edc3215137b09768b7949
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 19 08:23:15 2007 +0100
-* Code cleanup
+ [PATCH] Update Sequoia EBC configuration (NOR FLASH)
-* Add support for CompactFlash for the CPC45 Board.
+ As spotted by Matthias Fuchs, the READY input should not be
+ enabled for the NOR FLASH on the Sequoia board.
-* Fix problems with CMC_PU2 flash driver.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Cleanup:
- - avoid trigraph warning in fs/ext2/ext2fs.c
- - rename UC100 -> uc100
+commit 2605e90bf676d48123afe5719a846d2b52b24aac
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Feb 16 07:57:42 2007 +0100
-* Add support for UC100 board
+ [PATCH] Added support for the jupiter board.
-* Patch by Stefan Roese, 16 Dez 2004:
- - ext2fs support added
- - Tundra universe support added
- - ColdFire MCF5249 support added (no preloader needed!)
- - MCF5249 board TASREG added
- - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
- VOM405, WUH405
- - some esd boards updated
- - memory commands "mdc" and "mwc" added for cyclic read/write
- (CONFIG_MX_CYCLIC, see README for further description)
+ Signed-off-by: Heiko Schocher <hs@denx.de>
-* Add support for INKA4X0 board
+commit 497d012e5be0194e1084073d0081eb1a844796b2
+Author: Gary Jennejohn <garyj@pollux.denx.de>
+Date: Mon Feb 12 13:11:50 2007 +0100
-* Patch by Steven Scholz, 12 Dec 2004:
- Fix typo in AT91 memory setup.
+ LPC2292: patch from Siemens.
-* Patch by Martin Krause, 27 Oct 2004:
- - add support for "STK52xx" board (including PS/2 multiplexer)
- - add hardware detection for TQM5200
+commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Feb 10 08:49:31 2007 +0100
-* Clean up CMC PU2 flash driver
+ [PATCH] Add missing p3mx.h file to repository (ups)
-* Update MAINTAINERS file
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix bug in MPC823 LCD driver
+commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Feb 9 10:45:42 2007 +0100
-* Fix udelay() on AT91RM9200 for delays < 1 ms.
+ [Motion-PRO] Preliminary support for the Motion-PRO board.
-* Enable long help on CMC PU2 board;
- fix reset issue;
- increase CPU speed from 179 to 207 MHz.
+commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 7 16:51:08 2007 +0100
-* Fix smc91111 ethernet driver for Xaeniax board (need to handle
- unaligned tail part specially).
+ [PATCH] Update some AMCC 4xx board config files (set initrd_high)
-* Update for AT91RM9200DK and CMC_PU2 boards:
- - Enable booting directly from flash
- - fix CMC_PU2 flash driver
+ Some boards that can have more than 768MBytes of SDRAM need to
+ set "initrd_high", so that the initrd can be accessed by the
+ Linux kernel.
-* Fix mkimage usage message
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Map SRAM on NC650 board
+commit 7372ca68227930d03cffa548310524cad5b96733
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Feb 2 12:44:22 2007 +0100
-* Work around for Ethernet problems on Xaeniax board
+ [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
-* Patch by TsiChung Liew, 23 Sep 2004:
- - add support for MPC8220 CPU
- - Add support for Alaska and Yukon boards
+ Previously the strapping DCR/SDR was read to determine if the internal PCI
+ arbiter is enabled or not. This strapping bit can be overridden, so now
+ the current status is read from the correct DCR/SDR register.
-* Fix configuration for ERIC board (needs more room)
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Adjust MIPS compiler options at run-time depending on tools version
- ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
- "-mcpu=4kc" for old tools)
+commit 2aa54f651a42d198673318f07a20c89a43e4d197
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Feb 2 12:42:08 2007 +0100
-* Add passing of the command line and memory size information to the
- kernel on xaeniax board.
+ [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
-* Enable NAND flash support for NC650 board.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Thomas Lange 07 Oct 2004:
- Updated README for DBAu1x00 boards to match current status
+commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 1 13:22:41 2007 +0100
-* Patch by Philippe Robin, 28 Sept 2004:
- Fix Flash support for Versatile.
+ [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
-* Patch by Roger Blofeld, 16 Sep 2004:
- Fix timeout for DHCP command retry
+ When PCI PNP is enabled the pci pnp configuration routine is called
+ which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
+ problems with some PCI cards. For now disable the PCI PNP configuration.
-* Patch by Pantelis Antoniou, 14 Sep 2004:
- Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Pantelis Antoniou, 14 Sep 2004:
- Kick watchdog when bz-decompressing
+commit 2902fadade3be7659467e8d074048c6b7068f5c0
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 16:56:10 2007 +0100
-* Fix CFG_HZ problems on AT91RM9200 systems
- [Remember: CFG_HZ should be 1000 on ALL systems!]
+ [PATCH] Update 440EPx/440GRx cpu detection
-* Patch by Gridish Shlomi, 30 Aug 2004:
- - Add support to revA version of PQ27 and PQ27E.
- - Reverted MPC8260ADS baudrate back to original 115200
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Hojin, 17 Sep 2004:
- Fix typo in cfi_flash.c
+commit d5ea287b02a6945c3977410e364a879dd1a555c8
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 16:38:04 2007 +0100
-* Patch by Mark Jonas, 09 September 2004:
- mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
- error message
+ [PATCH] Update esd cpci5200 files
-* Patch by Mark Jonas, 31 August 2004:
- Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
- improves FTP performance for MPC5200 systems. Enabled for IceCube
- by default.
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-* Patch by Michael Bendzick, 30 Aug 2004:
- - Improve platform.S code for omap1510inn that detects whether code
- is running from SDRAM or not. Patch allows SDRAM to be configured
- if code is running out of SRAM at 0x20000000.
+commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 16:37:34 2007 +0100
-* Patch by Frederick Klatt, 30 Aug 2004:
- Add support for the Wind River SBC8540/SBC8560 boards
+ [PATCH] Add support for esd mecp5200 board
-* Configure SX1 board to use drivers/cfi_flash.c
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-* Patches by Michael Bendzick, 30 Aug 2004:
- - Configure omap1510inn board to use drivers/cfi_flash.c
- - Make drivers/cfi_flash.c protect environment and redundant
- environment.
+commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 12:38:50 2007 +0100
+
+ [PATCH] Remove unneccessary yellowstone board config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e802594b6fa1b166308820c276b96dc0d7cc731c
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 17:06:10 2007 +0100
+
+ [PATCH] Update Sequoia (440EPx) config file
+
+ The config file now handles the 2nd target, the Rainier (440GRx)
+ evaluation board better. Additionally the PPC input clock was
+ adjusted to match the correct value of 33.0 MHz.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 700200c67e73b83751418abe7815840dca8fd6cb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 17:04:19 2007 +0100
+
+ [PATCH] Merge Yosemite & Yellowstone board ports
+
+ Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
+ share one config file and all board specific files. This way we
+ don't have to maintain two different sets of files for nearly
+ identical boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 15:01:49 2007 +0100
+
+ [PATCH] Update Prodrive SCPU (PDNB3 variant) board
+
+ SCPU doesn't use redundant environment in flash.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 12:51:07 2007 +0100
+
+ [PATCH] alpr: Update alpr board config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f8db84f132b1e335f20f96138a1f09ed97b08664
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Jan 30 00:50:40 2007 +0100
+
+ LPC2292 SODIMM port coding style cleanup.
+
+commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
+Author: Gary Jennejohn <garyj@pollux.denx.de>
+Date: Wed Jan 24 12:16:56 2007 +0100
+
+ Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
+
+commit 2daf046ba627f85f44195815778140039636244e
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Jan 23 17:22:06 2007 +0100
+
+ [iDMR] Add MTD and JFFS2 support, also add default partition definition.
+
+commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Jan 23 14:21:14 2007 +0100
+
+ [iDMR] Flash driver on initialisation write-protects some sectors,
+ currently sectors 0-3. Sector 3 does not need to be protected, though
+ (U-boot occupies sectors 0-1 and the environment sector 2). This commit
+ fixes this, i.e., only sectors 0-2 are protected.
+
+commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Jan 23 14:11:22 2007 +0100
+
+ [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
+ "mii device" results in "Unexpected exception"). Fixing this properly
+ requires some clean-up in the FEC drivers infrastructure for ColdFire, so
+ this commit disables MII commads for now.
+
+commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Jan 23 13:25:22 2007 +0100
+
+ [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
+ Identification Register (CIR).
+
+commit fdef388758506765d4d6a7155c8f1584c63ff581
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Jan 22 13:19:21 2007 +0800
+
+ use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
+ The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
+ fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
+ mpc7448hpc2 board.
+
+commit a4012396645533aef218354eeba754dff0deace8
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Jan 19 23:08:39 2007 +0100
+
+ Minor code cleanup.
+
+commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jan 19 19:57:10 2007 +0100
+
+ [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jan 19 18:05:26 2007 +0100
+
+ [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
+ if you must swap the bytes between reading/writing.
+ (Needed for the SC3 board)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 16:05:47 2007 +0100
+
+ [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 11:54:52 2007 +0100
+
+ [PATCH] Update Prodrive P3Mx support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 34167a36c29ee946b727465db5c014746a08e978
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 11:48:10 2007 +0100
+
+ [PATCH] Add missing Taishan config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Jan 18 11:28:51 2007 +0100
+
+ [PATCH] Fix: Compilerwarnings for SC3 board.
+ The EBC Configuration Register is now by CFG_EBC_CFG definable
+ Added JFFS2 support for the SC3 board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 18 10:25:34 2007 +0100
+
+ [PATCH] Add support for AMCC Taishan PPC440GX eval board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Jan 16 18:30:50 2007 +0100
+
+ Raname solidcard3 into sc3; add redundant env for sc3
+
+commit 1bbbbdd20fcec9933697000dcf55ff7972622596
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Jan 16 12:46:35 2007 +0100
+
+ Update default environment for Solidcard3
+
+commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 15 09:46:29 2007 +0100
+
+ [PATCH] Fix 440SPe rev B detection from previous patch
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a443d31410c571ee8f970da819a44d698fdd6b1f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sun Jan 14 13:35:31 2007 +0100
+
+ [FIX] correct I2C Writes for the LM81 Sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0bba5452835f19a61204edcda3a58112fd8e2208
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Jan 13 11:17:10 2007 +0100
+
+ Undo commit 3033ebb2: reset command does not take any arguments
+
+ Haiying Wang's modification to the reset command was broken, undo it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 95981778cff0038fd9941044d6a3eda810e33258
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 08:01:03 2007 +0100
+
+ [PATCH] Update 440SP(e) cpu revisions
+
+ Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:59:56 2007 +0100
+
+ [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Also the EBC initialising is now done via defines in the board config
+ file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36adff362c2c0141ff8a810d42a7e478f779130f
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:59:19 2007 +0100
+
+ [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Also the EBC initialising is now done via defines in the board config
+ file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 13 07:57:51 2007 +0100
+
+ [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
+
+ Now the board revision and the current PCI bus speed are printed after
+ the board message.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca43ba18e910206ef8063e4b22d282630bff3fd2
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Jan 11 15:44:44 2007 +0100
+
+ Added support for the SOLIDCARD III board from Eurodesign
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
+Author: Reinhard Thies <Reinhard.Thies@web.de>
+Date: Wed Jan 10 14:41:14 2007 +0100
+
+ Adjusted default environment for cam5200 board.
+
+commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jan 10 15:35:52 2007 +0100
+
+ Update CHANGELOG
+
+commit 787fa15860a57833e50bd30555079a9cd4e519b8
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jan 10 01:28:39 2007 +0100
+
+ Fix auto_update for MCC200 board.
+
+ The invocation of do_auto_update() is moved to the end of the
+ misc_init_r() function, after the flash mappings have been
+ initialized. Please find attached a patch that implements that
+ change.
+
+ Also correct the decoding of the keypad status. With this update, the
+ key that will trigger the update is Column 2, Row 2.
+
+commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed Jan 10 00:26:15 2007 +0100
+
+ CAM5200 flash driver modifications:
+ - use CFI driver (replaces custom flash driver) for main 'cam5200' target
+ - add second build target 'cam5200_niosflash' which still uses custom driver
+
+commit 67fea022fa957f59653b5238c7496f80a6b70432
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 16:02:48 2007 +0100
+
+ SPC1920: cleanup memory contoller setup
+
+commit 8fc2102faa23593c80381437c09f7745a14deb40
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:14 2007 +0100
+
+ Fix the cpu speed setup to work with all boards.
+
+commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ SPC1920: add support for the FM18L08 Ramtron FRAM
+
+commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ SPC1920: update the HPI register addresses to work with the second
+ generation of hardware
+
+commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:13 2007 +0100
+
+ Miscellanious spc1920 related cleanups
+
+commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Jan 9 14:57:12 2007 +0100
+
+ SPC1920 GO/NOGO led should be set to color red in U-Boot
+
+commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:12 2007 +0100
+
+ Add support for the DS3231 RTC
+
+commit 8139567b60d678584b05f0718a681f2047c5e14f
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:11 2007 +0100
+
+ SMC1 uses external CLK4 instead of BRG on spc1920
+
+commit d8d9de1a02fbd880b613d607143d1f57342affc7
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Update the SPC1920 CMB PLD driver
+
+commit 3f34f869162750e5e999fd140f884f5de952bcfe
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Add / enable I2C support on the spc1920 board
+
+commit d28707dbce1e9ac2017ad051da4133bf22b4204f
+Author: Markus Klotzbuecher <mk@creamnet.de>
+Date: Tue Jan 9 14:57:10 2007 +0100
+
+ Add support for the tms320671x host port interface (HPI)
+
+commit f4eb54529bb3664c3a562e488b460fe075f79d67
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Jan 7 00:13:11 2007 +0100
+
+ Prepare for release 1.2.0
+
+commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:58:09 2007 +0100
+
+ [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
+
+ This patch fixes a problem with an incorrect setup for the refresh
+ timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f16c1da9577f06c5fc08651a4065537407de4635
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 6 15:56:13 2007 +0100
+
+ [PATCH] Update ALPR board files
+
+ This update brings the ALPR board support to the newest version.
+ It also fixes a problem with the NAND driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cd1d937f90250a32988c37b2b4af8364d25de8ed
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 11:46:05 2007 +0100
+
+ [PATCH] nand: Fix problem with oobsize calculation
+
+ Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
+
+ The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
+ returns a 0x15. In the code fragment below bits [1:0] determine the
+ page size, it is ANDed via "(extid & 0x3)" then shifted out. The
+ next field is also ANDed with 0x3. However this is a one bit field
+ as defined in the Hynix and Samsung parts in the 4th ID byte that
+ determins the oobsize, not a two bit field. It works on Samsung as
+ bits[3:2] are 01. However for the Hynix there is a 11 in these two
+ bits, so the oob size gets messed up.
+
+ I checked the correct linux code and the suggested fix from Brian is
+ also available in the linux nand mtd driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:40:36 2007 +0100
+
+ [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
+
+ This fix will make the MAL burst disabling patch for the Linux
+ EMAC driver obsolete.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 023889838282b6237b401664f22dd22dfba2c066
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jan 5 10:38:05 2007 +0100
+
+ [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
+
+ This code will optimize the DDR2 controller setup on a board specific
+ basis.
+
+ Note: This code doesn't work right now on the NAND booting image for the
+ Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cce4acbb68398634b8d011ed7bb0d12269c84230
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Dec 28 19:08:21 2006 +0100
+
+ Few V38B changes:
+ - fix a typo in V38B config file
+ - move watchdog initialisation earlier in the boot process
+ - add "wdt=off" to default kernel command line (disables kernel watchdog)
+
+commit 92eb729bad876725aeea908d2addba0800620840
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Dec 27 01:26:13 2006 +0100
+
+ Fix bug in adaption of Stefano Babic's CFI driver patch.
+
+commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Dec 24 01:42:57 2006 +0100
+
+ Minor code cleanup.
+
+commit d784fdb05900ada3686d5778783e1fb328e9fb66
+Author: Stefano Babic <sbabic@denx.de>
+Date: Tue Dec 12 00:22:42 2006 +0100
+
+ Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
+
+commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 22 14:29:40 2006 +0100
+
+ [PATCH] Fix sequoia flash autodetection (finally correct)
+
+ Now 32MByte and 64MByte FLASH is know to work and other
+ configurations should work too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82e5236a8b719543643fd26d5827938ab2b94818
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Dec 22 10:30:26 2006 +0100
+
+ Minor code cleanup; update CHANGELOG.
+
+commit fa23044564091f05d9695beb7b5b9a931e7f41a4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 17:17:02 2006 +0100
+
+ Added support for the TQM8272 board from TQ
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Thu Dec 21 16:14:48 2006 +0100
+
+ [PATCH] Add support for the UC101 board from MAN.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c84bad0ef60e7055ab0bd49b93069509cecc382a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:29:43 2006 +0100
+
+ Fix to make the baudrate changes immediate for the MCF52x2 family.
+
+commit daa6e418bcc0c717752e8de939c213c790286096
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Dec 20 00:27:32 2006 +0100
+
+ Preliminary support for the iDMR board (ColdFire).
+
+commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
+Author: Andrei Safronov <safronov@pollux.denx.de>
+Date: Fri Dec 8 16:23:08 2006 +0100
+
+ automatic update mechanism
+
+commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 17:56:59 2006 +0800
+
+ Slight code clean up.
+ Add comments, delete duplicate define and remove spaces.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 17:54:21 2006 +0800
+
+ Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
+ multiplier table can not refect the real PLL clock behavior of these
+ processors. Please refer to the hardware specification for detailed
+ information of the corresponding processors.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 14:46:23 2006 +0800
+
+ Remove the static MAC address, ip address, server ip, netmask and
+ gateway ip for network setting.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 14:33:08 2006 +0800
+
+ Remove the duplicate memory test code for mpc744ihpc2 board.
+ If a memory test is needed, please use the functions in
+ post/memory.c or memtest command.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Dec 1 19:01:25 2006 +0800
+
+ Fix the exception occuring in RAM table search issue.
+ The original search_one_table() function code can only processes the search
+ for the exception occurring in FLASH/ROM, because the exception and fixup
+ table usually locate in FLASH. If the exception address is also in
+ FLASH, it will be OK.
+ If the exception occurs in RAM, after the u-boot relocation, a
+ relocation offset should be added.
+
+ clean up the code in cpu/74xx_7xx/cpu.c
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit ee311214e0d216f904feea269599d0934bf71f23
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Dec 1 11:47:36 2006 +0800
+
+ Clean up the code according to codestyle:
+ (1) remove some C++ comments.
+ (2) remove trailing white space.
+ (3) remove trailing empty line.
+ (4) Indentation by table.
+ (5) remove {} in one line condition.
+ (6) add space before '(' in function call.
+ Remove some weird printf () output.
+ Add necessary comments.
+ Modified Makefile to support building in a separate directory.
+
+commit dd520bf314c7add4183c5191692180f576f96b60
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 18:02:20 2006 +0100
+
+ Code cleanup.
+
+commit 8d9a8610b8256331132227e9e6585c6bd5742787
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 30 01:54:07 2006 +0100
+
+ Code cleanup. Update CHANGELOG.
+
+commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 29 16:23:42 2006 +0100
+
+ [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
+
+ The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
+ not the XLB frequency.
+
+ This patch depends on the previous patches for MPC52xx device tree support
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
+
+commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 15:42:37 2006 +0100
+
+ [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
+
+ This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
+ and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
+ quite similar and share the same board directory "prodrive/p3mx"
+ and the same config file "p3mx.h".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:53:15 2006 +0100
+
+ [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
+
+ In the bootvx command the load address was only read from the env
+ variable "loadaddr" and not optionally passed as paramter as described
+ in the help. This is fixed with this patch. The behaviour is now the
+ same as in the bootelf command.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 29 12:03:57 2006 +0100
+
+ [PATCH] include/ppc440.h minor error affecting interrupts
+
+ Fixed include/ppc440.c for UIC address Bug
+
+ Corrects bug affecting the addresses for the universal interrupt
+ controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
+
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:27 2006 -0600
+
+ Make fsl-i2c not conflict with SOFT I2C
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 14198bf768fdc958e3c1afd2404e5262208e98d7
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Nov 28 16:17:18 2006 -0600
+
+ Fix I2C master address initialization.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:31:19 2006 -0600
+
+ Assign maintainers for mpc8349emds and mpc8360emds
+
+ Dave for mpc8360emds, and me for mpc8349emds.
+
+commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Nov 28 23:28:33 2006 -0600
+
+ Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
+
+ give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
+ since they are passed by reference to ucc_get_cmxucr_reg and assigned.
+
+commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Nov 28 12:09:35 2006 -0600
+
+ mpc83xx: Miscellaneous code style fixes
+
+ Implement various code style fixes and similar changes.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 17:55:49 2006 +0100
+
+ [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
+
+ This patch adds the code and configuration necessary to boot with an
+ arch/powerpc Linux kernel.
+
+ Signed-off-by: Grant Likely <grant.likely@gmail.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit e732faec95a83cb468b4850ae807c8301dde8f6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 16:09:24 2006 +0100
+
+ [PATCH] PPC4xx: 440SP Rev. C detection added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 11:04:45 2006 +0100
+
+ [PATCH] nand: Fix patch merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 28 11:04:45 2006 +0100
+
+ [PATCH] nand: Fix patch merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 22:53:53 2006 +0100
+
+ Update CHANGELOG
+
+commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:43:25 2006 +0100
+
+ [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
+
+ Patch below corrects the setting of the zmiifer register, it was
+ overwritting the register rather than ORing the settings.
+
+ Signed-off-by: Neil Wilson <NWilson@airspan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1a72545296800b7e219f93104ad5836f0003d66
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:34:10 2006 +0100
+
+ [PATCH] Select NAND embedded environment from board configuration
+
+ The current NAND Bootloader setup forces the environment
+ variables to be in line with the bootloader. This change
+ enables the configuration to be made in the board include
+ file instead so that it can be individually enabled.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 15784862857c3c2214498defcfed84ff137fb81e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:22:19 2006 +0100
+
+ [PATCH] nand_wait() timeout fixes
+
+ Two fixes for the nand_wait() function in
+ drivers/nand/nand_base.c:
+
+ 1. Use correct timeouts. The original timeouts in Linux
+ source are 400ms and 20ms not 40s and 20s
+
+ 2. Return correct error value in case of timeout. 0 is
+ interpreted as OK.
+
+ Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da5553b095bf04f4f109ad7e565dae3aba47b230
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 17:04:06 2006 +0100
+
+ [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
-* Patch by Steven Scholz, 23 Jun 2004:
- - Add script (tools/img2brec.sh) to programm U-Boot into
- (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
-
-* Patches by Scott McNutt, 24 Aug 2004:
- - Add support for Altera Nios-II processors.
- - Add support for Psyent PCI-5441 board.
- - Add support for Psyent PK1C20 board.
-
-* Patches by Jon Loeliger, 24 Aug 2004:
- - Add support for the MPC8541 and MPC8555 CDS boards
- - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
- - Convert MPC85xxADS to use common CFI flash driver
- - Fix PCI window on MPC85xx; remove unneeded PCI initialization
- from board_early_init_f()
- - Provide SW workaround for PCI initialization on 85xx CDS
-
-* Patches by George G. Davis, 24 Aug 2004:
- - Enable ramdisk/initrd tagged param support for omap1610h2_config
- - Remove static network setup defaults from mx1ads_config
- - update ARM boards to use constants from mach-types.h
-
-* Patch by Gary Jennejohn, 04 Oct 2004:
- - fix I2C on at91rm9200
- - add support for Ricoh RS5C372A RTC
-
-* Patch by Gary Jennejohn, 01 Oct 2004:
- - add support for CMC PU2 board
- - add support for I2C on at91rm9200
-
-* Patch by Gary Jennejohn, 28 Sep 2004:
- fix baudrate handling on at91rm9200
-
-* Patch by Yuli Barcohen, 22 Aug 2004:
- - remove ZPC.1900 board-specific flash driver;
- switch the port to generic CFI driver;
- - port clean-up
-
-* Patch by Hinko Kocevar, 21 Aug 2004:
- Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
-
-* Clean up tools/bmp_logo.c to not add trailing white space
-
-* Patch by Hinko Kocevar, 21 Aug 2004:
- - Group common framebuffer functions in common/lcd.c
- - Group common framebuffer macros and #defines in include/lcd.h
- - Provide calc_fbsize() for video ATAG
+ This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
+ arguments to bootm. It removes the getenv("disable_of") test that used
+ to be used for this purpose.
-* Patch by Sam Song, 21 August 2004:
- - Fix a typo in README
- - Align "(RO)" output for "flinfo" after "protect on"
- - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
- ratio 1:1 when core frequency less than 50MHz
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
-* Patches by Hinko Kocevar, 21 Aug 2004:
- - fix some "use of label at end of compound statement" warnings
- - Define type of LCD panel on lubbock board if CONFIG_LCD is used
+commit a9398e018593782c5fa7d0741955fc1256b34c1e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 27 15:32:42 2006 +0100
-* Patch by Steven Scholz, 16 Aug 2004:
- - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
- - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
- - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
- - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
- into cpu/arm920t/$(SOC)/
+ Minor code cleanup. Update CHANGELOG.
-* Patches by Sean Chang, 09 Aug 2004:
- - Added support for both 8 and 16 bit mode access to System ACE CF
- through MPU.
- - Fixed missing System ACE CF device during get FAT partition info
- in fat_register_device function.
- - Enabled System ACE CF support on ML300.
+commit 1729b92cde575476684bffe819d0b7791b57bff2
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:52:04 2006 +0100
-* Patch by Sean Chang, 09 Aug 2004:
- Synch defines for saveenv and do_saveenv functions so they get
- compiled under the same statement.
+ [PATCH] 4xx: Fix problem with board specific reset code (now for real)
-* Patch by Sean Chang, 09 Aug 2004:
- - Added I2C support for ML300.
- - Added support for ML300 to read out its environment information
- stored on the EEPROM.
- - Added support to use board specific parameters as part of
- U-Boot's environment information.
- - Updated MLD files to support configuration for new features
- above.
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patches by Travis Sawyer, 05 Aug 2004:
- - Remove incorrect bridge settings for eth group 6
- - Add call to setup bridge in ppc_440x_eth_initialize
- - Fix ppc_440x_eth_init to reset the phy only if its the
- first time through, otherwise, just check the phy for the
- autonegotiated speed/duplex. This allows the use of netconsole
- - only print the speed/duplex the first time the phy is reset.
+commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:49:51 2006 +0100
-* Patch by Shlomo Kut, 29 Mar 2004:
- Add support for MKS Instruments "Quantum" board
+ [PATCH] alpr: remove unused board specific flash driver
-* Fix build problem with Cogent boards;
- avoid using <asm/byteorder.h> when using the host compiler
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Ganapathi C, 04 Aug 2004:
- Fix NFS timeout issue
+commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:48:41 2006 +0100
-* Patch by Yuli Barcohen, 19 Jul 2004:
- - Fix host tools building in Cygwin environment
- - Fix header files search order for host tools
+ [PATCH] 4xx: Fix problem with board specific reset code
-* Patch by Tom Armistead, 19 Jul 2004:
- Fix kgdb.S support for 74xx_75x cpu
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Jon Loeliger, 15 Jul 2004:
- Fix MPC85xx I2C driver
+commit ec0c2ec725aec9524a177a77ce75559e644a931a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:46:06 2006 +0100
-* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
+ [PATCH] Remove testing 4xx enet PHY setup
-* Patch by Stephen Williams, 15 July 2004
- Set the PCI class code for JSE board as part of PCI interface setup
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Michael Bendzick, 15 Jul 2004:
- Fix problem with writes with odd sizes in drivers/cfi_flash.c when
- CFG_FLASH_USE_BUFFER_WRITE is set
+commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 27 14:12:17 2006 +0100
-* Patch by Yuli Barcohen, 13 Jul 2004:
- Allow clock setting on MPC866/MPC885 series chips according to
- environment variable `cpuclk'
+ [PATCH] Update Prodrive ALPR board support (440GX)
-* Patch by Yuli Barcohen, 20 Apr 2004:
- Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Vincent Dubey, 24 Sep 2004:
- Add support for xaeniax board
+commit 78d620ebb5871d252270dedfad60c6568993b780
+Author: Wolfgang Denk <wd@atlas.denx.de>
+Date: Thu Nov 23 22:58:58 2006 +0100
-* Add comment about non-GPL character of standalone applications to
- COPYING file
+ Updates for TQM5200 modules:
+ - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
+ - simplify "udate" definitions
-* Fix FEC ethernet problem on NSCU board.
+commit 2053283304eeddf250d109e6791eb6fa4cad14f7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 22 13:20:50 2006 +0100
-* Patch by Gary Jennejohn, 09 Sep 2004:
- allow to use USART1 as console port on at91rm9200dk boards
+ [PATCH] PPC4xx start.S: Fix for processor errata
-* Patch by Stefan Roese, 16 Sep 2004:
- Update AR405 board.
+ Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
+ errata 1.12: 440_33 by moving patch up in code.
-* Fix SysClk handling for PPChameleon and CATcenter boards
+ Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Detlev Zundel, 08 Sep 2004:
- Update etags build target
+commit 4ef6251403f637841000e0fef9e832aa01339822
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 20 20:39:52 2006 +0100
-* Improve NetConsole support: add support for broadcast destination
- address and buffered input.
+ [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
-* Cleanup compiler warnings for GCC 3.3.x and later
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
+commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 20 10:28:30 2006 +0100
-* Add support for IDS "NC650" board
+ Update CHANGELOG
-* Add automatic update support for LWMON board
+commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 13 13:55:24 2006 +0100
-* Clear Block Lock-Bits when erasing flash on LWMON board.
+ [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
-* Fix return code of "fatload" command
+ * Adds support for AMD command set Top Boot flash geometry reversal
+ * Adds support for reading JEDEC Manufacturer ID and Device ID
+ * Adds support for displaying command set, manufacturer id and
+ device ids (flinfo)
+ * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
+ * Removes outdated change history (refer to git log instead)
-* Enable MSDOS/VFAT filesystem support for LWMON board
+ Signed-off-by: Tolunay Orkun <listmember@orkun.us>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Martin Krause, 03 Aug 2004:
- change timing for SM501 graphics controller on TQM5200 module
+commit b21b511d4c50408f4853f46f06b601272196223f
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Nov 12 21:13:23 2006 +0100
-* Patch by Mark Jonas, 13 July 2004:
- - Total5200 LCD now run in little endian mode. Endianess conversion
- is done in hardware.
- - Removed last reference to "console" environment variable.
+ Update CHANGELOG
-* Patches by Lars Munch, 12 Jul 2004:
- - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
- board specific
- - split out the LXT971A PHY from ns_9750_eth.h
- - split the dm9161 phy part out of at91rm9200_ether.c
+commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:48:22 2006 +0100
-* Patch by Andreas Engel, 12 Jul 2004:
- Replaced hardcoded PL011 clock frequency with config variable.
- Fixed wrong CONFIG_CMD_DFL doc.
+ Disable the watchdog in the default config for the V38B board.
-* Patch by Thomas Viehweger, 09 Jun 2004:
- make it possible to remove chpart when there is only one partition
+commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sat Nov 11 22:43:00 2006 +0100
-* Add support for console over UDP (compatible to Ingo Molnar's
- netconsole patch under Linux)
+ Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
+ group is enabled for USB earlier (in cpu_init_f() instead of
+ usb_lowlevel_init()).
-* Patch by Jon Loeliger, 16 Jul 2004:
- - support larger DDR memories up to 2G on the PC8540/8560ADS and
- STXGP3 boards
- - Made MPC8540/8560ADS be 33Mhz PCI by default.
- - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
- and CONFIG_L2_INIT_RAM options.
- - Refactor Local Bus initialization out of SDRAM setup.
- - Re-implement new version of LBC11/DDR11 errata workarounds.
- - Moved board specific PCI init parts out of CPU directory.
- - Added TLB entry for PCI-1 IO Memory
- - Updated README.mpc85xxads
+commit 91650b3e4de688038d4f71279c44858e3e2c6870
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Nov 6 17:06:36 2006 +0100
-* Patch by Sascha Hauer, 28 Jun:
- - add generic support for Motorola i.MX architecture
- - add support for mx1ads, mx1fs2 and scb9328 boards
+ Sequential accesses to non-existent memory must be synchronized,
+ at least on G2 cores.
-* Patches by Marc Leeman, 23 Jul 2004:
- - Add define for the PCI/Memory Buffer Configuration Register
- - corrected comments in cpu/mpc824x/cpu_init.c
+ This fixes get_ram_size() problems on MPC5200 Rev. B boards.
-* Add support for multiple serial interfaces
- (for example to allow modem dial-in / dial-out)
+commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 19:15:00 2006 -0600
-* Patch by Stefan Roese, 15 Jul 2004:
- cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
+ mpc83xx: Update 83xx to use fsl_i2c.c
-* Fix NSCU config; add ethernet wakeup code.
+ Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
+ cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
+ Added multiple I2C bus support to fsl_i2c.c.
-* Add link for preloader for Motorola ColdFire to README.m68k
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Michael Bendzick, 12 Jul 2004:
- fix output formatting in drivers/cfi_flash.c
+commit d239d74b1c937984bc519083a8e7de373a390f06
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Nov 3 12:00:28 2006 -0600
-* Patch by Mark Jonas, 02 Jul 2004:
- Fix lowboot (again) on MPC5xxx
+ mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
-* Patch by Curt Brune, 07 Jul 2004:
- relocate exception vectors on arm720t if needed
+ Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
+ tree matches the other 8xxx trees.
-* Patch by George G. Davis, 06 Jul 2004:
- - update mach-types.h to latest arm.linux.org.uk master list
- - Set correct OMAP1610 bi_arch_number for build target
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Curt Brune, 06 Jul 2004:
- evb4510: add support for timer interrupt; cleanup
+commit f7fb2e703ec9688541416962724adff70a7322cb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Nov 2 19:47:11 2006 -0600
-* Patch by Dan Poirot, 06 Jul 2004:
- Fix sbc8260 environment variables
+ mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
-* Cleanup redundand "console" environment variable
+commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Nov 2 18:05:50 2006 -0600
-* Patch by Mark Jonas, 05 Jul 2004:
- add support for the Total5100's and Total5200's LCD screen
+ mpc83xx: Fix the incorrect dcbz operation
-* Patches by Dan Eisenhut, 01 Jul 2004:
- - README fixes.
- - Move doc2000.h include to prevent compiler warning on some boards
+ The 834x rev1.x silicon has one CPU5 errata.
-* Patch by Mark Jonas, 01 Jul 2004:
- Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
- MGT5100 and MPC5200 based Freescale platforms.
+ The issue is when the data cache locked with
+ HID0[DLOCK], the dcbz instruction looks like no-op inst.
-* Patch by Philippe Robin, 01 Jul 2004:
- Add initialization for Integrator and versatile board files.
+ The right behavior of the data cache is when the data cache
+ Locked with HID0[DLOCK], the dcbz instruction allocates
+ new tags in cache.
-* Patch by Hinko Kocevar, 01 Jun 2004:
- Fix VFD FB allocation, add LCD FB allocation on ARM
+ The 834x rev3.0 and later and 8360 have not this bug inside.
-* Patch by Martin Krause, 30 Jun 2004:
- Add support for TQM5200 board
+ So, when 834x rev3.0/8360 are working with ECC, the dcbz
+ instruction will corrupt the stack in cache, the processor will
+ checkstop reset.
-* Patch by Martin Krause, 29 Jun 2004:
- Add loopw command: infinite write loop on address range
+ However, the 834x rev1.x can work with ECC with these code,
+ because the sillicon has this cache bug. The dcbz will not
+ corrupt the stack in cache.
+ Really, it is the fault code running on fault sillicon.
-* Patches by Yasushi Shoji, 29 Jun 2004:
- - add empty include/asm-microblaze/processor.h
- - add to CREDITS and MAINTAINERS
- - add gd initialization
- - add MicroBlaze and SUZAKU board to MAKEALL script
- - add reset support for SUZAKU
- - add flush_cache() for MicroBlaze
- - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
- size flash memory on SUZAKU
+ This patch fix the incorrect dcbz operation. Instead of
+ CPU FP writing to initialise the ECC.
-* Patch by Prakash Kumar, 27 Jun 2004:
- Add support for the PXA250 based Intrinsyc Cerf board.
+ CHANGELOG:
+ * Fix the incorrect dcbz operation instead of CPU FP
+ writing to initialise the ECC memory. Otherwise, it
+ will corrupt the stack in cache, The processor will checkstop
+ reset.
-* Patch by Yasushi Shoji, 27 Jun 2004:
- fix comment in include/common.h
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Rename SBC8560 into sbc8560 for consistency
+commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:10:40 2006 -0600
-* Patch by Daniel Poirot, 24 Jun 2004:
- Add support for Wind River's sbc8240 board
+ mpc83xx: add OF_FLAT_TREE bits to 83xx boards
-* Patches by Yasushi Shoji, 26 Jun 2004:
- - drivers/serial_xuartlite.c: fix "return 0" in void function
- - add microblaze support to mkimage tool
+ add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
+ STDOUT_PATH configuration bits to mpc8349emds,
+ mpc8349itx, and mpc8360emds board code.
-* Patch by Fred Klatt, 25 Jun 2004:
- Add support for WindRiver's sbc8560 board
+ redo environment to use bootm with the fdtaddr
+ for booting ARCH=powerpc kernels by default,
+ and provide default fdtaddr values.
-* Patch by Nicolas Lacressonniere, 24 Jun 2004
- Small Bugs fixes for "at91rm9200dk" board:
- - Timing modifications for SPI DataFlash access
- - Fix NAND flash detection bug
+commit 48041365b3420589ad464ebc7752e0053538b729
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Nov 1 00:07:25 2006 -0600
-* Patch by Nicolas Lacressonniere, 24 Jun 2004:
- Add Support for Flash AT49BV6416 for AT91RM9200DK board
+ mpc83xx: change ft code to modify local-mac-address property
-* Patch by Jon Loeliger, 17 June 2004:
- Completion of the 8540ADS/8560ADS updates:
- Fix some PCI and Rapid I/O memory maps,
- Initialize both TSEC 1 and 2,
- Initialize SDRAM
- Update MAINTAINER for 85xx boards and README.mpc85xxads
+ Update 83xx OF code to update local-mac-address properties
+ for ethernet instead of the obsolete 'address' property.
-* Patch by Yuli Barcohen, 16 Jun 2004:
- Remove obsolete AdderII port which was superseded by unified
- AdderII/Adder87x port
+commit 9ca880a250870a7d55754291b5591d2b5fe89b54
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 21:23:16 2006 -0600
-* Patch by Ladislav Michl, 16 Jun 2004:
- Fix gcc-3.3.3 warnings for smc91111.c
+ mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
-* Patch by Stefan Roese, 02 Jul 2004:
- - Fix bug in 405 ethernet driver; allocated data not cleared!
- - Fix problem in 405 i2c driver; don't try to print without console!
+ This patch also adds an improved I2C set_speed(), which handles all clock
+ frequencies.
-* Patch by Paul Ruhland, 11 Jun 2004:
- Remove debug code from 'board/lpd7a40x/flash.c'
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Andrea Marson, 11 Jun 2004:
- Update for PPChameleon board:
- - support for SysClk @ 25MHz
- - support for Silicon Motion SM712 VGA controller
- - some clean ups
+commit ac4b5622ce050b5ee1e154b98df630d778661632
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:54:59 2006 -0600
-* Patches by Richard Woodruff, 10 Jun 2004:
- - fix problems with examples/stubs.c for GCC >= 3.4
- - fix problems with gd initialization
+ mpc83xx: add the README.mpc8360emds
-* Patch by Curt Brune, 17 May 2004:
- - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
- - Add support for ESPD-Inc. EVB4510 Board
+ add doc/README.mpc8360emds to accompany the new board support
-* Patch by Marc Leeman, 11 May 2004:
- Fix for MPC8245 - reading PPC Memory from another device with the
- PPC as PCI target device corrupts data due to interenal hardware
- buffering.
+commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 12:11:15 2006 -0600
-* Fix "cls" command when used with splash screen
+ mpc83xx: add QE ethernet support
-* Increase NFS download timeout (now 1 min - 10 sec is to short for a
- slow download of a big image)
+ this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
-* Add "cls" function to MPC823 LCD driver so we can reinitialize the
- display even after showing a bitmap
+commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 3 19:33:44 2006 -0600
-* Patch by Josef Wagner, 04 Jun 2004:
- - DDR Ram support for PM520 (MPC5200)
- - support for different flash types (PM520)
- - USB / IDE / CF-Card / DiskOnChip support for PM520
- - 8 bit boot rom support for PM520/CE520
- - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
- - I2C and RTC support for CPC45
- - support of new flash type (28F160C3T) for CPC45
+ mpc83xx: Add MPC8360EMDS basic board support
-* Fix flash parameters passed to Linux for PPChameleon board
+ Add support for the Freescale MPC8360EMDS board.
+ Includes DDR, DUART, Local Bus, PCI.
-* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
+commit 23892e49352de74f7fac36ff90bb1be143d195e3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:30:40 2006 -0600
-* Patch by Paul Ruhland, 10 Jun 2004:
- fix support for Logic SDK-LH7A404 board and clean up the
- LH7A404 register macros.
+ mpc83xx: add the QUICC Engine (QE) immap file
-* Patch by Matthew McClintock, 10 Jun 2004:
- Modify code to select correct serial clock on Sandpoint8245
+ common QE immap file. Also required for 8360.
-* Patch by Robert Schwebel, 10 Jun 2004:
- Add support for Intel K3 strata flash.
+commit b701652a4992bdcc62fb1a6038a85beef9e55da4
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 31 19:25:38 2006 -0600
-* Patch by Thomas Brand, 10 Jun 2004:
- Fix "loads" command on DK1S10 board
+ mpc83xx: Add 8360 specifics to 83xx immap
-* Patch by Yuli Barcohen, 09 Jun 2004:
- Add support for 8MB flash SIMM and JFFS2 file system on
- Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
-
-* Patch by Yuli Barcohen, 09 Jun 2004:
- Add support for Analogue&Micro Adder87x and the older AdderII board.
-
-* Patch by Ming-Len Wu, 09 Jun 2004:
- Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
-
-* Patch by Sam Song, 09 Jun 2004:
- - Add support for RPXlite_DW board
- - Update FLASH driver for 4*AM29DL323DB90VI
- - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
-
-* Patch by Mark Jonas, 08 June 2004:
- - Make MPC5200 boards evaluate the SVR to print processor name and
- version in checkcpu() (cpu/mpc5xxx/cpu.c).
-
-* Patch by Kai-Uwe Bloem, 06 May 2004:
- Fix endianess problem in cramfs code
-
-* Patch by Tom Armistead, 04 Jun 2004:
- Add support for MAX6900 RTC
-
-* Patches by Ladislav Michl, 03 Jun 2004:
- - fix cfi_flash.c on LE systems
- - let 'make mrproper' delete u-boot.img as well
- - turn printf into debug in cfi_flash.c
-
-* Patch by Kurt Stremerch, 28 May 2004:
- Add support for Exys XSEngine board
-
-* Patch by Martin Krause, 27 May 2004:
- Fix a MPC5xxx I2C timing issue in i2c_probe().
-
-* Patch by Leif Lindholm, 27 May 2004:
- Fix board_init_f() for dbau1x00 board.
-
-* Patch by Imre Deak, 26 May 2004:
- On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
- Set flash base accordingly, and decide whether to do or skip board
- specific setup steps.
-
-* Patch by Josef Baumgartner, 26 May 2004:
- Add missing define in include/asm-m68k/global_data.h
-
-* Patch by Josef Baumgartner, 25 May 2004:
- Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
-
-* Patch by Paul Ruhland, 24 May 2004:
- fix SDRAM initialization for LPD7A400 board.
+ Mainly add QE device dependencies, with appropriate 8360 protection.
+ Lindent also run.
-* Patch by Jian Zhang, 20 May 2004:
- add support for environment in NAND flash
+commit 988833324a7fda482c8ac3ca23eb539f8232e404
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 19:14:41 2006 -0600
-* Patch by Yuli Barcohen, 20 May 2004:
- Add support for Interphase iSPAN boards.
-
-* Patches by Paul Ruhland, 17 May 2004:
- - Add I/O functions to the smc91111 ethernet driver to support the
- Logic LPD7A40x boards.
- - Add support for the Logic Zoom LH7A40x based SDK board(s),
- specifically the LPD7A400.
+ mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
-* Patches by Robert Schwebel, 15 May 2004:
- - call MAC address reading code also for SMSC91C111;
- - make SMSC91C111 timeout configurable, remove duplicate code
- - fix get_timer() for PXA
- - update doc/README.JFFS2
- - use "bootfile" env variable also for jffs2
-
-* Patch by Tolunay Orkun, 14 May 2004:
- Add support for Cogent CSB472 board (8MB Flash Rev)
-
-* Patch by Thomas Viehweger, 14 May 2004:
- - flash.h: more flash types added
- - immap_8260.h: some bits added (useful for RMII)
- - cmd_coninfo.c: typo corrected, printf -> puts
- - reduced size by replacing spaces with tab
-
-* Patch by Robert Schwebel, 13 May 2004:
- Add 'imgextract' command: extract one part of a multi file image.
-
-* Patches by Jon Loeliger, 11 May 2004:
- Dynamically handle REV1 and REV2 MPC85xx parts.
- (Jon Loeliger, 10-May-2004).
- New consistent memory map and Local Access Window across MPC85xx line.
- New CCSRBAR at 0xE000_0000 now.
- Add RAPID I/O memory map.
- New memory map in README.MPC85xxads
- (Kumar Gala, 10-May-2004)
- Better board and CPU identification on MPC85xx boards at boot.
- (Jon Loeliger, 10-May-2004)
- SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
- Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
- (Jim Robertson, 10-May-2004)
- Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
- Supports multiple PHYs.
- (Andy Fleming, 10-May-2004)
- Some README.MPC85xxads updates.
- (Kumar Gala, 10-May-2004)
- Copyright updates for "Freescale"
- (Andy Fleming, 10-May-2004)
+ PREREQUISITE PATCHES:
-* Patch by Stephen Williams, 11 May 2004:
- Add flash support for ST M29W040B
- Reduce JSE specific flash.c to remove dead code.
+ * This patch can only be applied after the following patches have been applied:
-* Patch by Markus Pietrek, 04 May 2004:
- Fix clear_bss code for ARM systems (all except s3c44b0 which
- doesn't clear BSS at all?)
+ 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
+ 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
-* Fix "ping" problem on INC-IP board. Strange problem:
- Sometimes the store word instruction hangs while writing to one of
- the Switch registers, but only if the next instruction is 16-byte
- aligned. Moving the instruction into a separate function somehow
- makes the problem go away.
+ CHANGELOG:
-* Patch by Rishi Bhattacharya, 08 May 2004:
- Add support for TI OMAP5912 OSK Board
+ * For the 8349E-mITX, fix some size values in pci_init_board(), enable
+ the clock for the 2nd USB board (Linux kernel will hang otherwise),
+ and fix the CONFIG_BOOTARGS macro.
-* Patch by Sam Song May, 07 May 2004:
- Fix typo of UPM table for rmu board
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Pantelis Antoniou, 05 May 2004:
- - Intracom board update.
- - Add Codec POST.
+commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:44:42 2006 -0600
-* Add support for the second Ethernet interface for the 'PPChameleon'
- board.
+ mpc83xx: Add support for the MPC8349E-mITX
-* Patch by Dave Peverley, 30 Apr 2004:
- Add support for OMAP730 Perseus2 Development board
+ PREREQUISITE PATCHES:
-* Patch by Alan J. Luse, 29 Apr 2004:
- Fix flash chip-select (OR0) option register setting on FADS boards.
+ * This patch can only be applied after the following patches have been applied:
-* Patch by Alan J. Luse, 29 Apr 2004:
- Report MII network speed and duplex setting properly when
- auto-negotiate is not enabled.
+ 1) DNX#2006090742000024 "Add support for multiple I2C buses"
+ 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
+ 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
+ 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
+ 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
-* Patch by Jarrett Redd, 29 Apr 2004:
- Fix hang on reset on Ocotea board due to flash in wrong mode.
+ CHANGELOG:
-* Patch by Dave Peverley, 29 Apr 2004:
- add MAC address detection to smc91111 driver
+ * Add support for the Freescale MPC8349E-mITX reference design platform.
+ The second TSEC (Vitesse 7385 switch) is not supported at this time.
-* Patch by David Müller, 28 Apr 2004:
- fix typo in lib_arm/board.c
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Tolunay Orkun, 20 Apr 2004:
- - README update: add CONFIG_CSB272 and csb272_config
- - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
- i2cfast environment variable
+commit 183da6d9b446cc12123455844ad1187e2375626f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Tue Sep 12 10:15:53 2006 -0400
-* Patch by Yuli Barcohen, 19 Apr 2004:
- - Rename DUET_ADS to MPC885ADS
- - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- - Clean up FADS family port to use the new defines
+ Additional MPC8349 support for multibus i2c
-* Fix PCI support on CPC45 board
+ Hello,
-* Patch by Scott McNutt, 25 Apr 2004:
- Add Nios GDB/JTAG Console support:
- - Add stubs to support gdb via JTAG.
- - Add support for console over JTAG.
- - Minor cleanup.
+ Here is a patch for a file that was accidentally left out of a previous
+ attempt.
-* Add support for CATcenter board (based on PPChameleon ME module)
+ It accompanies the patch with ticket DNX#2006090742000024
-* Patch by Klaus Heydeck, 12 May 2004:
- Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
- load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
- various changes to KUP4 board specific files
+ CHANGELOG:
+ Change PCI initialization to use new multi-bus I2C API.
-* Fix minor network problem on MPC5200: need some delay between
- resetting the PHY and sending the first packet. Implemented in a
- "natural" way by invoking the PHY reset and initialization code
- only once after power on vs. each time the interface is brought up.
+ regards,
+ Ben
-* Add some limited support for low-speed devices to SL811 USB controller
- (at least "usb reset" now passes successfully and "usb info" displays
- correct information)
+commit b24f119d672b709d153ff2ac091d4aa63ec6877d
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:51:04 2006 -0400
-* Change init sequence for multiple network interfaces: initialize
- on-chip interfaces before external cards.
+ Multi-bus I2C implementation of MPC834x
-* Fix memory leak in the NAND-specific JFFS2 code
+ Hello,
-* Fix SL811 USB controller when attached to a USB hub
+ Attached is a patch implementing multiple I2C buses on the MPC834x CPU
+ family and the MPC8349EMDS board in particular.
+ This patch requires Patch 1 (Add support for multiple I2C buses).
+ Testing was performed on a 533MHz board.
-* Fix config option spelling in PM520 config file
+ /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
-* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
- patches by Pantelis Antoniou, 30 Mar 2004)
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Fix minor NAND JFFS2 related issue
+ CHANGELOG:
+ Implemented driver-level code to support two I2C buses on the
+ MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
+ are 50kHz, 100kHz and 400kHz on each bus.
-* Fixes for SL811 USB controller:
- - implement workaround for broken memory stick
- - improve error handling
+ regards,
+ Ben
-* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
- cope with congested networks.
+commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Sep 7 16:50:54 2006 -0400
-======================================================================
-Changes for U-Boot 1.1.1:
-======================================================================
+ Add support for multiple I2C buses
-* Patch by Travis Sawyer, 23 Apr 2004:
- Fix VSC/CIS 8201 phy descrambler interoperability timing due to
- errata from Vitesse Semiconductor.
+ Hello,
-* Patch by Philippe Robin, 22 Apr 2004:
- Fix ethernet configuration for "versatile" board
+ Attached is a patch providing support for multiple I2C buses at the
+ command level. The second part of the patch includes an implementation
+ for the MPC834x CPU and MPC8349EMDS board.
-* Patch by Kshitij Gupta, 21 Apr 2004:
- Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
+ /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
-* Patch by Steven Scholz, 24 Feb 2004:
- Fix a bug in AT91RM9200 ethernet driver:
- The MII interface is now initialized before accessing the PHY.
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Patch by John Kerl, 19 Apr 2004:
- Use U-boot's miiphy.h for PHY register names, rather than
- introducing a new header file.
+ Overview:
-* Update pci_ids.h from linux-2.4.26
+ 1. Include new 'i2c' command (based on USB implementation) using
+ CONFIG_I2C_CMD_TREE.
-* Patch by Masami Komiya, 19 Apr 2004:
- Fix problem cause by VLAN function on little endian architecture
- without VLAN environment
+ 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
+ the commands to change bus number and speed are only available under the
+ new 'i2c' command mentioned in the first bullet.
-* Clean up the TQM8xx_YYMHz configurations; allow to use the same
- binary image for all clock frequencies. Implement run-time
- optimization of flash access timing based on the actual bus
- frequency.
+ 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
+ systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
+ of an array of bus-device pairs. Otherwise, it is an array of uchar.
-* Modify KUP4X board configuration to use SL811 driver for USB memory
- sticks (including FAT / VFAT filesystem support)
+ CHANGELOG:
+ Added new 'i2c' master command for all I2C interaction. This is
+ conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
+ setting I2C bus speed as well as changing the active bus if the board
+ has more than one (conditionally compiled with
+ CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
+ Updated README.
-* Add SL811 Host Controller Interface driver for USB
+ regards,
+ Ben
-* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+commit bed85caf872714ebf53013967a695c9d63acfc68
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Oct 31 18:13:36 2006 -0600
-* Patch by Pantelis Antoniou, 19 Apr 2004:
- Allow to use shell style syntax (i. e. ${var} ) with standard parser.
- Minor patches for Intracom boards.
+ mpc83xx: Add support for Errata DDR6 on MPC 834x systems
-* Patch by Christian Pell, 19 Apr 2004:
- cleanup support for CF/IDE on PCMCIA for PXA25X
+ CHANGELOG:
-* Temporarily disabled John Kerl's extended MII command code because
- "miivals.h" is missing
+ * Errata DDR6, which affects all current MPC 834x processors, lists changes
+ required to maintain compatibility with various types of DDR memory. This
+ patch implements those changes.
-* Patches by Mark Jonas, 13 Apr 2004:
- - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
- - Add sync instructions to IceCube SDRAM init code
- - Move SDRAM chip constants into seperate include files
- - Unify DDR and SDR initialization code
- - Unify all IceCube (Lite5xxx) target names
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by John Kerl, 16 Apr 2004:
- Enable ranges in mii command, e.g. mii read 0-1f 0 or
- mii read 4-7 18-1a. Also add mii dump subcommand for
- pretty-printing standard regs 0-5.
+commit afd6e470f639883002c7c59d562690a5cb0f4865
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Oct 25 18:45:23 2006 -0500
-* Patch by Stephen Williams, 16 April 2004:
- fix typo in JSE.h; update MAINTAINERS
+ mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
-* Patch by Matthew S. McClintock, 14 Apr 2004:
- fix initdram function for utx8245 board
+commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Aug 22 17:07:00 2006 -0500
-* Patch by Markus Pietrek, 14 Apr 2004:
- use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
-
-* Patch by Reinhard Meyer, 18 Apr 2004:
- provide the IDE Reset Function for EMK 5200 boards
+ mpc83xx: Add support for variable flash memory sizes on 83xx systems
-* Patch by Masami Komiya, 12 Apr 2004:
- fix pci_hose_write_config_{byte,word}_via_dword problems
-
-* Patch by Sangmoon Kim, 12 Apr 2004:
- Update max RAM size for debris board
+ CHANGELOG:
-* Patch by Travis Sawyer, 08 Apr 2004:
- Add TLB entry for second DIMM slot on ocotea
+ * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
+ window registers, instead of using a hard-coded value of 8MB.
-* Patch by Masami Komiya, 08 Apr 2004:
- add RTL8169 network driver
+ Signed-off-by: Timur Tabi <timur@freescale.com>
-* Patch by Dan Malek, 07 Apr 2004:
- - Add support for RPC/STx GP3, Motorola 8560 board
- - Update 85xx TSEC driver so it searches MII for first available PHY
- and uses that one.
- - Add functions to support console MII commands.
-
-* Patch by Tolunay Orkun, 07 Apr 2004:
- Move initialization of bi_iic_fast[]
- from board_init_f() to board_init_r()
-
-* Patch by Yasushi Shoji, 07 Apr 2004:
- Cleanup microblaze port
-
-* Patch by Sangmoon Kim, 07 Apr 2004:
- Add auto SDRAM module detection for Debris board
-
-* Patch by Rune Torgersen, 06 Apr 2004:
- - Fix some PCI problems on the MPC8266ADS board
- - Fix the location of some PCI entries in the immap structure
-
-* Patch by Yasushi Shoji, 07 Apr 2004:
- - add support for microblaze processors
- - add support for AtmarkTechno "suzaku" board
-
-* Configure PPChameleon board to use redundand environment in flash
-
-* Configure PPChameleon board to use JFFS2 NAND support.
-
-* Added support for JFFS2 filesystem (read-only) on top of NAND flash
-
-* Patch by Rune Torgersen, 16 Apr 2004:
- LBA48 fixes
-
-* Patches by Pantelis Antoniou, 16 Apr 2004:
- - add support for a new version of an Intracom board and fix
- various other things on others.
- - add verify support to the crc32 command (define
- CONFIG_CRC32_VERIFY to enable it)
- - fix FEC driver for MPC8xx systems:
- 1. fix compilation problems for boards that use dynamic
- allocation of DPRAM
- 2. shut down FEC after network transfers
- - HUSH parser fixes:
- 1. A new test command was added. This is a simplified version of
- the one in the bourne shell.
- 2. A new exit command was added which terminates the current
- executing script.
- 3. Fixed handing of $? (exit code of last executed command)
- - Fix some compile problems;
- add "once" functionality for the netretry variable
-
-* Patch by George G. Davis, 02 Apr 2004:
- add support for Intel Assabet board
-
-* Patch by Stephen Williams, 01 Apr 2004:
- Add support for Picture Elements JSE board
-
-* Patch by Christian Pell, 01 Apr 2004:
- Add CompactFlash support for PXA systems.
-
-* Patches by Pantelis Antoniou, 30 Mar 2004:
- - add auto-complete support to the U-Boot CLI
- - add support for NETTA and NETPHONE boards; fix NETVIA board
- - add support for the Epson 156x series of graphical displays
- (These displays are serial and not suitable for using a normal
- framebuffer console on them)
- - add infrastructure needed in order to POST any DSPs in a board
- - improve and fix various things in the MPC8xx FEC driver:
- 1. The new 87x and 88x series of processors have two FECs,
- and the new driver supports them both.
- 2. Another change in the 87x/88x series is support for
- the RMII (Reduced MII) interface. However numerous
- changes are needed to make it work since the PHYs
- are connected to the same lines. That means that
- you have to address them correctly over the MII
- interface.
- 3. We now correctly match the MII/RMII interface
- configuration to what the PHY reports.
- - Fix problem when readingthe MII status register. Due to the
- internal design of many PHYs you have to read the register
- twice. The problem is more apparent in 10Mbit mode.
- - add new mode ".jffs2s" for reading from a NAND device: it just
- skips over bad blocks.
- - add networking support for VLANs (802.1q), and CDP (Cisco
- Discovery Protocol)
- - some minor patches / cleanup
-
-* Patch by Yuli Barcohen, 28 Mar 2004:
- - Add support for MPC8272 family including MPC8247/8248/8271/8272
- - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
- - Change configuration method for MPC8260ADS family
-
-* add startup code to clear the BSS of standalone applications
-
-* Fix if / elif handling bug in HUSH shell
-
-======================================================================
-Changes for U-Boot 1.1.0:
-======================================================================
-
-* Patch by Mark Jonas: Remove config.tmp files only when
- unconfiguring the board
-
-* Adapt RMU board for bigger flash memory
-
-* Patch by Klaus Heydeck, 13 Mar 2003:
- Add support for KUP4X Board
-
-* Patch by Pavel Bartusek, 21 Mar 2004
- Add Reiserfs support
-
-* Patch by Hinko Kocevar, 20 Mar 2004
- - Add auto-release for SMSC LAN91c111 driver
- - Add save/restore of PTR and PNR regs as suggested in datasheet
-
-* Patch by Stephen Williams, 19 March 2004
- Increase speed of sector reads from SystemACE,
- shorten poll timeout and remove a useless reset
-
-* Patch by Tolunay Orkun, 19 Mar 2004:
- Make GigE PHY 1000Mbps Speed/Duplex detection conditional
- (CONFIG_PHY_GIGE)
-
-* Patch by Brad Kemp, 18 Mar 2004:
- prevent machine checks during a PCI scan
-
-* Patch by Pierre Aubert, 18 Mar 2004:
- Fix string cleaning in IDE identification
-
-* Patch by Pierre Aubert, 18 Mar 2004:
- - Unify video mode handling for Chips & Technologies 69000 Video
- chip and Silicon Motion SMI 712/710/810 Video chip
- - Add selection of the video output (CRT or LCD) via 'videoout'
- environment variable for the Silicon Motion
- - README update
-
-* Patch by Pierre Aubert, 18 Mar 2004:
- include/common.h typo fix
-
-* Patches by Tolunay Orkun, 17 Mar 2004:
- - Add support for bd->bi_iic_fast[] initialization via environment
- variable "i2cfast" (CONFIG_I2CFAST)
- - Add "i2cfast" u-boot environment variable support for csb272
-
-* Patch by Carl Riechers, 17 Mar 2004:
- Ignore '\0' characters in console input for use with telnet and
- telco pads.
-
-* Patch by Leon Kukovec, 17 Mar 2004:
- typo fix for strswab prototype #ifdef
+commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:38:13 2006 +0800
-* Patches by Thomas Viehweger, 16 Mar 2004:
- - show PCI clock frequency on MPC8260 systems
- - add FCC_PSMR_RMII flag for HiP7 processors
- - in do_jffs2_fsload(), take load address from load_addr if not set
- explicit, update load_addr otherwise
- - replaced printf by putc/puts when no formatting is needed
- (smaller code size, faster execution)
+ mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
-* Patch by Phillippe Robin, 16 Mar 2004:
- avoid dereferencing NULL pointer in lib_arm/armlinux.c
-
-* Patch by Stephen Williams, 15 Mar 2004:
- Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
+ Unified TQM834x variable names with 83xx and consolidated macro
+ in preparation for the 8360 and other upcoming 83xx devices.
-* Patch by Tolunay Orkun, 15 Mar 2004:
- Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
-* Patch by Travis Sawyer, 15 Mar 2004:
- Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
+commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
+Author: Dave Liu <daveliu@freescale.com>
+Date: Wed Oct 25 14:41:21 2006 -0500
-* Add start-up delay to make sure power has stabilized before
- attempting to switch on USB on SX1 board.
+ mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
-* Patch by Josef Wagner, 18 Mar 2004:
- - Add support for MicroSys XM250 board (PXA255)
- - Add support for MicroSys PM828 board (MPC8280)
- - Add support for 32 MB Flash on PM825/826
- - new SDRAM refresh rate for PM825/PM826
- - added support for MicroSys PM520 (MPC5200)
- - replaced Query by Identify command in CPU86/flash.c
- to support 28F160F3B
+ Incorporated the common unified variable names and the changes in preparation
+ for releasing mpc8360 patches.
-* Fix wrap around problem with udelay() on ARM920T
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
-* Add support for Macronix flash on TRAB board
+commit 3894c46c27c64891f93ac04edde86a9fa9758d92
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:36:02 2006 +0800
-* Patch by Pierre Aubert, 15 Mar 2004:
- Fix buffer overflow in IDE identification
+ mpc83xx: Fix missing build for mpc8349emds pci.c
-* Fix power-off of LCD for out-of-band temperatures on LWMON board
+ Make pci build for mpc8349emds
-* Remove redundand #define in IceCube.h
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
-* Patch by Steven Scholz, 27 Feb 2004:
- - Adding get_ticks() and get_tbclk() for AT91RM9200
- - Many white space fixes in cpu/at91rm9200/interrupts.c
+commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
+Author: Tanya Jiang <tanya.jiang@freescale.com>
+Date: Thu Aug 3 18:39:49 2006 +0800
-* Patches by Steven Scholz, 20 Feb 2004:
- some cleanup in AT91RM9200 related code
+ mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
-* Patches by Travis Sawyer, 12 Mar 2004:
- - Fix Gigabit Ethernet support for 440GX
- - Add Gigabit Ethernet Support to MII PHY utilities
+ Removed unused file resetvec.S for mpc83xx cpu
-* Patch by Brad Kemp, 12 Mar 2004:
- Fixes for drivers/cfi_flash.c:
- - Better support for x8/x16 implementations
- - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
- - Added defines for AMD command and address constants
+ Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
-* Patch by Leon Kukovec, 12 Mar 2004:
- Fix get_dentfromdir() to correctly handle deleted dentries
+commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
+Author: Nick Spence <Nick.Spence@freescale.com>
+Date: Sat Sep 30 00:32:59 2006 -0700
-* Patch by George G. Davis, 11 Mar 2004:
- Remove hard coded network settings in TI OMAP1610 H2
- default board config
+ NAND Flash verify across block boundaries
-* Patch by George G. Davis, 11 Mar 2004:
- add support for ADS GraphicsClient+ board.
+ This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
+ defined
+ and the write crosses a block boundary. The pointer to the verification
+ buffer (bufstart) is not being updated to reflect the starting of the
+ new
+ block so the verification of the second block fails.
-* Patch by Pierre Aubert, 11 Mar 2004:
- - add bitmap command and splash screen support in cfb console
- - add [optional] origin in the bitmap display command
+ CHANGELOG:
-* Patch by Travis Sawyer, 11 Mar 2004:
- Fix ocotea board early init interrupt setup.
+ * Fix NAND FLASH page verification across block boundaries
-* Patch by Thomas Viehweger, 11 Mar 2004:
- Remove redundand code; add PCI-specific bits to include/mpc8260.h
+commit f484dc791a3932537213c43c654cc1295c64b84c
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Sep 7 07:39:46 2006 -0700
-* Patch by Stephan Linz, 09 Mar 2004
- - Add support for the SSV ADNP/ESC1 (Nios Softcore)
+ Added RGMII support to the TSECs and Marvell 881111 Phy
-* Patch by George G. Davis, 9 Mar 2004:
- fix recent build failure for SA1100 target
+ Added a phy initialization to adjust the RGMII RX and TX timing
+ Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
-* Patch by Travis Sawyer, 09 Mar 2004:
- Support native interrupt mode for the IBM440GX.
- Previously it was running in 440GP compatibility mode.
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
-* Patch by Philippe Robin, 09 Mar 2004:
- Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
- Platform support.
+commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Nov 3 13:10:00 2006 +0800
-* Patch by Masami Komiya, 08 Mar 2004:
- Don't overwrite server IP address or boot file name
- when the boot server does not return values
+ Remove some unused CFG define.
+ undef CFG_DRAM_TEST
-* Patch by Tolunay Orkun, 5 Mar 2004:
- Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
+commit 99c09c4dec34f77c243bf51bea532e3f339410ad
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Nov 3 13:07:36 2006 +0800
-* Patch by Tolunay Orkun, 5 Mar 2004:
- Fix early board initialization for Cogent CSB272 board
+ Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
+ Both work. 0xFF000000 seems more reasonable.
-* Patch by Ed Okerson, 3 Mar 2004:
- fix CFI flash writes for little endian systems
+commit c59200443072353044aa4bf737a5a60f9a9af231
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Nov 2 15:15:01 2006 +0100
-* Patch by Reinhard Meyer, 01 Mar 2004:
- generalize USB and IDE support for MPC5200 with according
- changes to IceCube.h and TOP5200.h
- add Am29LV256 256 MBit FLASH support for TOP5200 boards
- add info about USB and IDE to README
+ Release U-Boot 1.1.6
-* Patch by Yuli Barcohen, 4 Mar 2004:
- Fix problems with GCC 3.3.x which changed handling of global
- variables explicitly initialized to zero (now in .bss instead of
- .data as before).
+commit c1fbe4103a0d6c8957f912af902d705ba67836f2
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:14:48 2006 +0800
-* Patch by Leon Kukovec, 02 Mar 2004:
- add strswab() to fix IDE LBA capacity, firmware and model numbers
- on little endian machines
+ This patch comes from Yuli's posted patch on 8/8/2006
+ titled "CFI Driver Little-Endian write Issue".
-* Patch by Masami Komiya, 02 Mar 2004:
- - Remove get_ticks() from NFS code
- - Add verification of RPC transaction ID
+ http://sourceforge.net/mailarchive/message.php?msg_id=36311999
-* Patch by Pierre Aubert, 02 Mar 2004:
- cleanup for IDE and USB drivers for MPC5200
+ If that patch applied, please discard this one.
+ Until now , I do not see his patch is applied. So please apply this one.
-* Patch by Travis Sawyer, 01 Mar 2004:
- Ocotea:
- - Add IBM PPC440GX Ref Platform support (Ocotea)
- Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
- Adapted to U-Boot and 440GX port
- 440gx_enet.c:
- - Add gracious handling of all Ethernet Pin Selections for 440GX
- - Add RGMII selection for Cicada CIS8201 Gigabit PHY
- ppc440.h:
- - Add needed bit definitions
- - Fix formatting
+ Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Carl Riechers, 1 Mar 2004:
- Add PPC440GX prbdv0 divider to fix memory clock calculation.
+commit b825f158e449e1e9cf74c08e572955e122394c96
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:12:31 2006 +0800
-* Patch by Stephan Linz, 27 Feb 2004
- - avoid problems for targets without NFS download support
+ Tsi108 on chip i2c support.
-* Patch by Rune Torgersen, 27 Feb 2004:
- - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
- - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
- - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
+ The i2c Interface provides a master-only, serial interface that can be
+ used for initializing Tsi108/Tsi109 registers from an EEPROM after a
+ device reset.
-* Patch by Masami Komiya, 27 Feb 2004:
- Fix rarpboot: add autoload by NFS
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Dan Eisenhut, 26 Feb 2004:
- fix flash_write return value in saveenv
+commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:11:06 2006 +0800
-* Patch by Stephan Linz, 11 Dec 2003
- expand config.mk to avoid trigraph warnings on NIOS
+ Tsi108 on chip pci controller support.
-* Rename "BMS2003" board into "HMI10"
+ If there is no pci card, the tsi108/109 pci configure read will
+ cause a machine check exception to the processor. PCI error should
+ also be cleared after the read.
-* SX1 patches: use "serial#" for USB serial #; use redundand environment
- storage; auto-set console on USB port (using preboot command)
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Add support for SX1 mobile phone; add support for USB-based console
- (enable with "setenv stdout usbtty; setenv stdin usbtty")
+commit d1927cee977126e547ceeba23e4f978f377cfb8f
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:08:55 2006 +0800
-* Fix LOWBOOT configuration for MPC5200 with DDR memory
+ Tundra tsi108 on chip Ethernet controller support.
-* Fix SDRAM timings for LITE5200 / IceCube board
+ The following is a brief description of the Ethernet controller:
+ The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
+ Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
+ to manage the two physical connection devices (PHYs). Each Ethernet port
+ has its own statistics monitor that tracks and reports key interface
+ statistics. Each port supports a 256-entry hash table for address
+ filtering. In addition, each port is bridged to the Switch Fabric
+ through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
-* Handle Auti-MDIX / connection status for INCA-IP
+ Each Ethernet port also has a pair of internal Ethernet DMA channels to
+ support the transmit and receive data flows. The Ethernet DMA channels
+ use descriptors set up in memory, the memory map of the device, and
+ access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
+ handles arbitration for the Switch Fabric. The Controller also
+ has a register businterface for register accesses and status monitor
+ control.
-* Fix USB problems when attempting to read 0 bytes
+ The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
+ modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
+ The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
+ data flows to and from the Ethernet Controller through the Switch Fabric.
-* Patch by Travis Sawyer, 26 Feb 2004:
- Fix broken compile for XPEDITE1K target.
+ Each Ethernet port uses its transmit and receive DMA channels to manage
+ data flows through buffer descriptors that are predefined by the
+ system (the descriptors can exist anywhere in the system memory map).
+ These descriptors are data structures that point to buffers filled
+ with data ready to transmit over Ethernet, or they point to empty
+ buffers ready to receive data from Ethernet.
-* Patch by Stephan Linz, 26 Feb 2004:
- Bug fix for NFS code on NIOS targets
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Stephen Williams, 26 Feb 2004:
- Break up SystemACE reads of large block counts
+commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:01:33 2006 +0800
-* Patch by Pierre Aubert, 26 Feb 2004
- add IDE support for MPC5200
+ Tundra tsi108 header file.
-* Patch by Masami Komiya, 26 Feb 2004:
- add autoload via NFS
+ The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
+ PowerPC processors that offers numerous system interconnect options for
+ embedded application designers. The Tsi108 can interconnect 60x or
+ MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
+ and Flash. Provided the macro define for tsi108 chip.
-* Patch by Stephen Williams
- Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
- elsewhere in the source.
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Steven Scholz, 25 Feb 2004:
- - Timeouts in FPGA code should be based on CFG_HZ
- - Minor cleanup in code for Altera FPGA ACEX1K
+commit 87c4db09699c6b89176b31004afcb83eb1585d47
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:59:15 2006 +0800
-* Patch by Steven Scholz, 25 Feb 2004:
- Changed "Directory Hierarchy" section in README
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
-* Patch by Masami Komiya, 25 Feb 2004:
- Reduce copy count in nfs_read_reply() of NFS code
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Markus Pietrek, 24 Feb 2004:
- NS9750 DevBoard added
+commit 27801b8ab11c61b577e45742a515bb3b23b80241
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:57:21 2006 +0800
-* Patch by Pierre Aubert, 24 Feb 2004
- add USB support for MPC5200
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ Make ,config.mk and link file for the mpc7448hpc2 board.
-* Patch by Steven Scholz, 24 Feb 2004:
- - fix MII commands to use values from last command
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Torsten Demke, 24 Feb 2004:
- Add support for the eXalion platform (SPSW-8240, F-30, F-300)
+commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:55:04 2006 +0800
-* Patch by Rahul Shanbhag, 19 Feb 2004:
- Fixes for for OMAP1610 board:
- - shift some IRQ specific code to platform.S file
- - remove duplicatewatchdog reset code from start.S
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ The mpc7448hpc2 board support header file.
-* Make Auto-MDIX Support configurable on INCA-IP board
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Fix license for mkimage tool
+commit 625bb5ddb50b243f931262ca8c46956409471917
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:52:21 2006 +0800
-* Patch by Masami Komiya, 24 Feb 2004:
- Update NetBootFileXferSize in NFS code
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ The mpc7448hpc2 board support low level assemble language init code.
-* Patch by Scott McNutt, 24 Feb 2004:
- fix packet length in NFS code
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Masami Komiy, 22 Feb 2004:
- Add support for NFS for file download
+commit 4c52783b3d024e153c4972b97332e314bc3bdc46
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:49:51 2006 +0800
-* Patch by Andrea Scian, 17 Feb 2004:
- Add support for S3C44B0 processor and DAVE B2 board
+ General code modification for mpc7448hpc2 board support.
+ 1. Add 7447A and 7448 processor support.
+ 2. Add the following flags.
-* Patch by Steven Scholz, 20 Feb 2004:
- - Add support for MII commands on AT91RM9200 boards
- - some cleanup in AT91RM9200 ethernet code
+ CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
+ (such as by switch on board), this flag should be set.
-* Patch by Peter Ryser, 20 Feb 2004:
- Add support for the Xilinx ML300 platform
+ CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
+ relocates to RAM, this flag should be set.
-* Patch by Stephan Linz, 17 Feb 2004:
- Fix watchdog support for NIOS
+ CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
+ system hang in exception, this flag should be set.
-* Patch by Josh Fryman, 16 Feb 2004:
- Fix byte-swapping for cfi_flash.c for different bus widths
+ There is a design issue for tsi108/109 pci configure read. When pci scan
+ the slots, if there is no pci card, the tsi108/9 will cause a machine
+ check exception for mpc7448 processor.
-* Patch by Jon Diekema, 14 Jeb 2004:
- Remove duplicate "FPGA Support" notes from the README file
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patches by Reinhard Meyer, 14 Feb 2004:
- - update board/emk tree; use common flash driver
- - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
- [adapted for other PPC CPUs -- wd]
- - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
+commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:34:47 2006 +0800
-* Patch by Jon Diekema, 13 Feb 2004:
- Call show_boot_progress() whenever POST "FAILED" is printed.
+ Add README file for mpc7448hpc2 board.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
-* Patch by Nishant Kamat, 13 Feb 2004:
- Add support for TI OMAP1610 H2 Board
- Fixes for cpu/arm926ejs/interrupt.c
- (based on Richard Woodruff's patch for arm925, 16 Oct 03)
- Fix for a timer bug in OMAP1610 Innovator
- Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
+commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 02:04:38 2006 +0100
-* Patches by Stephan Linz, 12 Feb 2004:
- - add support for NIOS timer with variable period preload counter value
- - prepare POST framework support for NIOS targets
+ Finish up support for MarelV38B board
+ - add watchdog support
+ - enable GPIO_WKUP_7 pin for input
+ - code cleanup
-* Patch by Denis Peter, 11 Feb 2004:
- add POST support for the MIP405 board
+commit ffa150bc90c943ca265170bd1be3f293674dd5c7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:45:46 2006 +0100
-* Patch by Laurent Mohin, 10 Feb 2004:
- Fix buffer overflow in common/usb.c
+ - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
+ * remove warnings when compiling ethaddr.c
+ * adjust linker script (fixes a crash resulting from incorrect
+ definition of __u_boot_cmd_start)
+ - Some MarelV38B code cleanup.
-* Patch by Tolunay Orkun, 10 Feb 2004:
- Add support for Cogent CSB272 board
+commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:38:16 2006 +0100
-* Patch by Thomas Elste, 10 Feb 2004:
- Add support for NET+50 CPU and ModNET50 board
+ - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
+ MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
+ Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
+ MPC5XXX_WU_GPIO_DATA_O for affected boards.
-* Patch by Sam Song, 10 Feb 2004:
- Fix typos in cfi_flash.c
+ - Add defintions for some MPC5XXX GPIO pins.
-* Patch by Leon Kukovec, 10 Feb 2004
- Fixed long dir entry slot id calculation in get_vfatname
+commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Nov 1 01:34:29 2006 +0100
-* Patch by Robin Gilks, 10 Feb 2004:
- add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
- !=, <>, <, >, <=, >=)
+ Changed MarelV38B board make target to lowercase. Config file cleanup.
-* Fix problem with side effects in macros in include/usb.h
+commit 1954be6e9c9421b45d0a9d05b10356acc7563150
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Oct 29 01:03:51 2006 +0200
-* Patch by David Benson, 13 Nov 2003:
- bug 841358 - fix TFTP download size limit
+ Automatically adjust ARFLAGS so "make -s" is really silent.
-* Fixing bug 850768:
- improper flush_cache() in load_serial()
+commit fae684e89844856383bdf101440889557df3e6b1
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 16:45:00 2006 +0200
-* Fixing bug 834943:
- MPC8540 - missing volatile declarations
+ [PATCH] omap925.c: Remove unused functions
-* Patch by Stephen Williams, 09 Feb 2004:
- Add support for Xilinx SystemACE chip:
- - New files common/cmd_ace.c and include/systemace.h
- - Hook systemace support into cmd_fat and the partition manager
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Travis Sawyer, 09 Feb 2004:
- Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
+commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 17:12:58 2006 +0200
-* Patch by Travis Sawyer, 09 Feb 2004:
- o 440GX:
- - Fix PCI Indirect access for type 1 config cycles with ppc440.
- - Add phymode for 440 enet
- - fix pci pre init
- o XPedite1K:
- - Change board_pre_init to board_early_init_f
- - Add user flash to bus controller setup
- - Fix pci pre init
- - Fix is_pci_host to check GPIO for monarch bit
- - Force xpedite1k to pci conventional mode (via #define option)
+ [PATCH] Add some missing machtypes for netstar & voiceblue boards
-* Patch by Brad Kemp, 4 Feb 2004:
- - handle the machine check that is generated during the PCI scans
- on 82xx processors.
- - define the registers used in the IMMR by the PCI subsystem.
+ Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
+ numbers in code.
-* Patch by Pierre Aubert, 03 Feb 2004:
- cpu/mpc5xxx/start.S: copy MBAR into SPR311
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Jeff Angielski, 03 Feb 2004:
- Fix copy & paste error in cpu/mpc8260/pci.c
+commit 856f054410cef52d868feb330168b2a4c4091328
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 15:55:52 2006 +0200
-* Patch by Reinhard Meyer, 24 Jan 2004:
- Fix typo in cpu/mpc5xxx/pci_mpc5200.c
+ [PATCH] NAND: Partition name support added to NAND subsystem
-* Add Auto-MDIX support for INCA-IP
+ chpart, nboot and NAND subsystem related commands now accept also partition
+ name to specify offset.
-* Some code cleanup
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
-* Patch by Josef Baumgartner, 10 Feb 2004:
- Fixes for ColdFire port
+commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:44 2006 +0200
-* Patch by Brad Kemp, 11 Feb 2004:
- Fix CFI flash driver problems
+ Update CHANGELOG.
-* Make sure to use a bus clock divider of 2 only when running TQM8xxM
- modules at CPU clock frequencies above 66 MHz.
+commit 2751a95abd1b96911081c357e96a12fa97b40dee
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:14 2006 +0200
-* Optimize flash programming speed for LWMON (by another 100% :-)
+ Enable commandline editing and hush shell on all TQM boards.
-* Patch by Jian Zhang, 3 Feb 2004:
- - Changed the incorrect FAT12BUFSIZE
- - data_begin in fsdata can be negative. Changed it to be short.
+commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:28:02 2006 +0200
-* Patches by Stephan Linz, 30 Jan 2004:
- 1: - board/altera/common/flash.c:flash_erase():
- o allow interrupts befor get_timer() call
- o check-up each erased sector and avoid unexpected timeouts
- - board/altera/dk1c20/dk1s10.c:board_early_init_f():
- o enclose sevenseg_set() in cpp condition
- - remove the ASMI configuration for DK1S10_standard_32 (never present)
- - fix some typed in mistakes in the NIOS documentation
- 2: - split DK1C20 configuration into several header files:
- o two new files for each NIOS CPU description
- o U-Boot related part is remaining in DK1C20.h
- 3: - split DK1S10 configuration into several header files:
- o two new files for each NIOS CPU description
- o U-Boot related part is remaining in DK1S10.h
- 4: - Add support for the Microtronix Linux Development Kit
- NIOS CPU configuration at the Altera Nios Development Kit,
- Stratix Edition (DK-1S10)
- 5: - Add documentation for the Altera Nios Development Kit,
- Stratix Edition (DK-1S10)
- 6: - Add support for the Nios Serial Peripharel Interface (SPI)
- (master only)
- 7: - Add support for the common U-Boot SPI framework at
- RTC driver DS1306
+ README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
-* Patch by Rahul Shanbhag, 28 Jan 2004:
- Fix flash protection/locking handling for OMAP1610 innovator board.
+commit 471a7be7a042e95e440f5de969c9765214ae8d6e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 28 01:14:32 2006 +0200
-* Patch by Rolf Peukert, 28 Jan 2004:
- fix flash write problems on CSB226 board (write with 32 bit bus width)
+ Check for illegal character '=' in environment variable names.
-* Patches by Mark Jonas, 16 Jan 2004:
- - fix rounding error when calculating baudrates for MPC5200 PSCs
- - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
- time which is not supported
+ Make sure the string passed as variable name does not contain a '='
+ character. This not only prevents the common error or typing
+ "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
+ also closes a backdoor which allowed to delete write-protected
+ environment variables, for example by using "setenv ethaddr=".
-* Patch by Yuli Barcohen, 26 Jan 2004:
- Allow bzip2 compression for small memory footprint boards
+commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 00:38:39 2006 +0200
-* Patch by Brad Kemp, 21 Jan 2004:
- Add support for CFI flash driver for both the Intel and the AMD
- command sets.
+ Minor code cleanup.
-* Patch by Travis Sawyer, 20 Jan 2004:
- Fix pci bridge auto enumeration of sibling p2p bridges.
+commit e11887a77d81077416a2d1c5e0354916fee8c034
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Oct 26 17:55:31 2006 +0200
-* Patch by Tolunay Orkun, 12 Jan 2004:
- Add some delays as needed for Intel LXT971A PHY support
+ Don't pass any debug options directly to the assembler
-* Patches by Stephan Linz, 09 Jan 2004:
- - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
- - make DK1C20 board configuration related to ASMI conform to
- documentation
+ When passing the -g option to gcc, gcc automatically selects a
+ suitable --g<format> option to pass on to the assembler.
+ Thus, there's no point in forcing a specific debug option on the
+ assembler using the -Wa mechanism.
-* Patch by Anders Larsen, 09 Jan 2004:
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
- ARM memory layout fixes: the abort-stack is now set up in the
- correct RAM area, and the BSS is zeroed out as it should be.
+commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 27 07:47:22 2006 -0500
- Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
- of the linker scripts are replaced by '__bss_start' and '_end',
- resp., which is a further step to eliminate unnecessary differences
- between the implementation of the CPU architectures.
+ MPC86xx: Cleaned up unused and conditionally used local variables.
-* Patch by liang a lei, 9 Jan 2004:
- Fix Intel 28F128J3 ID in include/flash.h
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Masami Komiya, 09 Jan 2004:
- add support for TB0229 board (NEC VR4131 MIPS processor)
+commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Fri Oct 27 11:55:21 2006 +0200
-* Patch by Leon Kukovec, 12 Dec 2003:
- changed extern __inline__ into static __inline__ in
- include/linux/byteorder/swab.h
+ Fix "ar" flags in some Makefiles to allow for silent "make -s"
-* Patch by Travis Sawyer, 30 Dec 2003:
- Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
- select MDI port based on enabled EMAC device.
- Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
- base PrPMC board.
+commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Oct 26 14:38:25 2006 -0400
-* Patch by Wolter Kamphuis, 15 Dec 2003:
- made CONFIG_SILENT_CONSOLE usable on all architectures
+ Fix TSEC driver (now for real): avoid crashes if PHY is not attached
+ to a TSEC (e.g. a switch is connected via RMII) or
+ if the PHY is defective/incorrectly configured.
-* Disable date command on TQM866M - there is no RTC on MPC866
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
+commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
+Author: Ben Warren <bwarren@qstreams.com>
+Date: Thu Oct 26 14:38:25 2006 -0400
-* Implement adaptive SDRAM timing configuration based on actual CPU
- clock frequency for INCA-IP; fix problem with board hanging when
- switching from 150MHz to 100MHz
+ Fix TSEC driver: avoid crashes if PHY is not attached
+ to a TSEC (e.g. a switch is connected via RMII) or
+ if the PHY is defective/incorrectly configured.
-* Add PCMCIA CS support for BMS2003 board
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
-* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
- see doc/README.MPC866 for details;
- implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
- calculate CPU clock frequency from PLL register values.
+commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Thu Oct 26 16:24:31 2006 +0200
-* Add support for 128 MB RAM on TQM8xxL/M modules
+ Code cleanup.
-* Fix PS/2 keyboard problem caused by statically initialized variable
- pointing to a location in flash
+commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Oct 25 15:48:59 2006 +0200
-* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
+ Finish up support for the ATSTK1000/ATSTK1002 boards
-* The PS/2 mux on the BMS2003 board needs 450 ms after power on
- before we can access it; add delay in case we are faster (with no
- CF card inserted)
+ Add atstk1002_config target to Makefile and move the AVR32 section
+ down below Blackfin so that it doesn't end up in the middle of
+ MIPS.
-* Cleanup of some init functions
+ Drop the autogenerated linker script thing for now. Will have to
+ revisit how to handle chips with different flash and RAM layout
+ later.
-* Make sure SCC Ethernet is always stopped by the time we boot Linux
- to avoid Linux crashes by early packets coming in.
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Accelerate flash accesses on LWMON board by using buffered writes
+commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 24 23:47:37 2006 -0500
-* Fix typo in Makefile;
- fix problem with PARTNUM detection
+ Added support for Multi-Image files that contain a device tree
-* Patch by Reinhard Meyer, 09 Jan 2004:
- - add RTC support for MPC5200 based boards (requires RTC_XTAL)
+ If a Multi-Image file contains a third image we try to use it as a
+ device tree. The device tree image is assumed to be uncompressed in the
+ image file. We automatically allocate space for the device tree in memory
+ and provide an 8k pad to allow more than a reasonable amount of growth.
-* Add support for IDE LED on BMS2003 board
- (exclusive with status LED!)
+ Additionally, a device tree that was contained in flash will now automatically
+ get copied to system memory as part of boot. Previously an error was
+ reported if one tried to boot a device tree that was in flash.
-* Add support for PS/2 keyboard (used with PS/2 multiplexor on
- BMS2003 board)
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
- Add common files for "emk" boards
+commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 24 21:35:55 2006 +0200
-* Add a common get_ram_size() function and modify the the
- board-specific files to invoke that common implementation.
+ Switch to automatically generated CHANGELOG file.
+ (use "make CHANGELOG" to update it from time to time)
-======================================================================
-Changes for U-Boot 1.0.1:
-======================================================================
+commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 24 18:06:48 2006 +0200
-* Set default clock for INCA-IP to 150 MHz
+ Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
+ Patch by Stefan Roese, 24 Oct 2006
-* Make BMS2003 use a separate config file to avoid #ifdef mess;
- add I2C support; add support for DS1337 RTC
+commit 8ae3b713b2286e0c3213b7802062e4c1599010de
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 17:24:55 2006 +0200
-* Add CompactFlash support for BMS2003 board
+ Merge with /home/wd/git/u-boot/master
-* Add support for status LED on BMS2003 board
+commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 15:32:57 2006 +0200
-* Patch by Scott McNutt, 02 Jan 2004:
- Add support for the Nios Active Serial Memory Interface (ASMI)
- on Cyclone devices
+ Code cleanup
-* Patch by Andrea Marson, 16 Dec 2003:
- Add support for the PPChameleon ME and HI modules
+commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:51:36 2006 +0200
-* Patch by Yuli Barcohen, 22 Dec 2003:
- Add support for Motorola DUET ADS board (MPC87x/88x)
+ Move atstk1000 files into vendor specific directory.
+ Patch by Haavard Skinnemoen, 12 Sep 2006
-* Patch by Robert Schwebel, 15 Dec 2003:
- add support for cramfs (uses JFFS2 command interface)
+commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:42:37 2006 +0200
-* Patches by Stephan Linz, 11 Dec 2003:
- - more documentation for NIOS port
- - new struct nios_pio_t, struct nios_spi_t
- - Reconfiguration for NIOS Development Kit DK1C20:
- o move board related code from board/dk1c20
- to board/altera/dk1c20
- o create a new common source path board/altera/common
- and move generic flash access stuff into it
- o change/expand configuration file DK1C20.h
- - Add support for NIOS Development Kit DK1S10
- - Add status LED support for NIOS systems
- - Add dual 7-segment LED support for Altera NIOS DevKits
+ Add ATSTK1000 and ATSTK1002 board support
+ Patch by Haavard Skinnemoen, 06 Sep 2006
-* Patch by Ronen Shitrit, 10 Dec 2003:
- Add support for the Marvell DB64360 / DB64460 development boards
+ This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
+ daughterboard.
-* Patch by Detlev Zundel, 10 Dec 2003:
- fix dependency problem in examples/Makefile
+ ATSTK1000 is a full-featured development board for AT32AP CPUs. It
+ has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
+ and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
+ CompactFlash cards. For more information, please see this page:
-* Patch by Denis Peter, 8 Dec 2003
- - add support for the PATI board (MPC555)
- - add SPI support for the MPC5xx
+ http://www.atmel.com/dyn/products/tools.asp?family_id=682
-* Patch by Anders Larsen, 08 Dec 2003:
- add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
- to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
- cleanup some redundand #defines
+ The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
+ AT32AP7000 chip.
-* Patch by André Schwarz, 8 Dec 2003:
- fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
- - TX and RX deskriptors must be quad-word aligned
- - does not work with only one TX deskriptor
- - standard reset method does not work
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Patch by Masami Komiya, 08 Dec 2003:
- add RTL8139 ethernet driver
+commit f93ae788c3640fcde5db383471d45548ff4060d0
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:31:24 2006 +0200
-* Patches by Ed Okerson, 07 Dec 2003:
- - fix ethernet for the AU1x00 processors in little-endian mode.
- - extend memsetup.S for the AU1x00 processors in BE and LE modes
+ Add common serial driver for Atmel AT32 and AT91 chips
+ Patch by Haavard Skinnemoen, 06 Sep 2006
-* Minor code cleanup (coding style)
+ This is a first attempt at creating a common serial driver for Atmel
+ chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
+ be possible to support AT91RM9200 and other ARM-based chips with some
+ minor modifications.
-* Patch by Reinhard Meyer, 30 Dec 2003:
- - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
- - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
- - turned debug print of PHY registers into a function (called in two places)
- - added support for EMK MPC5200 based modules
+ There's nothing fundamentally AVR32-specific in this driver, but it
+ does use some features which are currently only defined for the
+ AT32AP CPU port:
+ * pm_get_clock_freq: Obtain the clock frequency of a given domain
+ * gd->console_uart: A "struct device" containing information about
+ register mappings, gpio resources and clocks associated with the
+ UART device.
-* Fix MPC8xx PLPRCR_MFD_SHIFT typo
+ For more information about these features, please see the "AT32AP
+ CPU" patch.
-* Add support for TQM866M modules
+commit 72a087e04705c26cad982879ebd06b5281bf825a
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:27:35 2006 +0200
-* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
+ Add AT32AP CPU and AT32AP7000 SoC support
+ Patch by Haavard Skinnemoen, 06 Sep 2006
-* Fix a few compiler warnings
+ This patch adds support for the AT32AP CPU family and the AT32AP7000
+ chip, which is the first chip implementing the AVR32 architecture.
-* Patch by Reinhard Meyer, 28 Dec 2003:
- Add initial support for TOP5200 board
-
-* Make CPU clock on ICA-IP board controllable by a "cpuclk"
- environment variable which can set to "100", "133", or "150". The
- CPU clock will be configured accordingly upon next reboot. Other
- values are ignored. In case of an invalid or undefined "cpuclk"
- value, the compile-time default CPU clock speed will be used.
-
-* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
- window that is used to access the UART registers by the Linux driver)
-
-* Patch by Reinhard Meyer, 20 Dec 2003:
- Fix clock calculation for the MPC5200 for higher clock frequencies
- (above 2**32 / 10 = 429.5 MHz).
-
-* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
-
-* Fix IceCube CLKIN configuration (it's 33.000000MHz)
-
-* Add new configuration for IceCube board with DDR memory
-
-* Update TRAB memory configurations
-
-* Add JFFS2 support for INCA-IP board
-
-* Patch by Bill Hargen, 09 Dec 2003:
- - BUBINGA405EP: changed flash driver to protect top sector containing
- first instruction.
- - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
- - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
- - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
- - 405EP: added/fixed support for "reginfo" command.
- - 4xx: removed spurious MII error messages on "mii info" command.
-
-* Patch by Bernhard Kuhn, 28 Nov 2003:
- add support for ColdFire CPU
- add support for Motorola M5272C3 and M5282EVB boards
-
-* Patch by Pierre Aubert, 24 Nov 2003:
- - add a return value for the fpga command
- - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
- is defined. If ide_preinit fails, ide_init is aborted.
- - fix an endianess problem in fat.h
-
-* Patch by Wolter Kamphuis, 05 Dec 2003:
- Add support for SNMC's QS850/QS823/QS860T boards
-
-* Patch by Yuli Barcohen, 3 Dec 2003:
- "revive" U-Boot support for old Motorola MPC860ADS board
-
-* Patch by Cam(ilo?), 03 Dec 2003:
- make examples build even with broken Montavista objcopy
+ The AT32AP CPU core is a high-performance implementation featuring a
+ 7-stage pipeline, separate instruction- and data caches, and a MMU.
+ For more information, please see the "AVR32 AP Technical Reference":
-* Patch by Pavel Bartusek, 27 Nov 2003:
- fix conversion problem with "bootretry" evironment variable
+ http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
-* Patch by Andre Schwarz, 24 Nov 2003:
- add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
+ In addition to this, the AT32AP7000 chip comes with a large set of
+ integrated peripherals, many of which are shared with the AT91 series
+ of ARM-based microcontrollers from Atmel. Full data sheet is
+ available here:
-* Patch by Pavel Bartusek, 21 Nov 2003:
- set ZMII bridge speed on 440
+ http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
-* Patch by Anders Larsen, 17 Nov 2003:
- Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Patches by David Müller, 14 Nov 2003:
- - board/mpl/common/common_util.c
- * implement support for BZIP2 compressed images
- * various cleanups (printf -> puts, ...)
- - board/mpl/common/flash.c
- * report correct errors to upper layers
- * check the erase fail and VPP low bits in status reg
- - board/mpl/vcma9/cmd_vcma9.c
- - board/mpl/vcma9/flash.c
- * various cleanups (printf -> puts, ...)
- - common/cmd_usb.c
- * fix typo in comment
- - cpu/arm920t/usb_ohci.c
- * support for S3C2410 is missing in #if line
- - drivers/cs8900.c
- * reinit some registers in case of error (cable missing, ...)
- - fs/fat/fat.c
- * support for USB/MMC devices is missing in #if line
- - include/configs/MIP405.h
- - include/configs/PIP405.h
- * enable BZIP2 support
- * enlarge malloc space to 1MiB because of BZIP2 support
- - include/configs/VCMA9.h
- * enable BZIP2 support
- * enlarge malloc space to 1MiB because of BZIP2 support
- * enable USB support
- - lib_arm/armlinux.c
- * change calling convention of ARM Linux kernel as
- described on http://www.arm.linux.org.uk/developer/booting.php
+commit 7b64fef33c66be648826c0ff9758298ef13d0604
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 14:21:16 2006 +0200
-* Patch by Thomas Lange, 14 Nov 2003:
- Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
- support all these AMD boards.
+ Add AVR32 architecture support
+ Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
-* Patch by Thomas Lange, 14 Nov 2003:
- Workaround for mips au1x00 physical memory accesses (the au1x00
- uses a 36 bit bus internally and cannot access physical memory
- directly. Use the uncached SDRAM address instead of the physical
- one.)
+ This patch adds common infrastructure code for the Atmel AVR32
+ architecture. See doc/README.AVR32 for details.
-* Patch by Xue Ligong (Joe), 13 Nov 2003:
- add Realtek 8019 ethernet driver
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-* Patch by Yuli Barcohen, 13 Nov 2003:
- MPC826xADS/PQ2FADS cleanup
+commit 2da2d9a4766063b9848f3a35ad6025499cf87265
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 13:57:33 2006 +0200
-* Patch by Anders Larsen, 12 Nov 2003:
- Update README to mark the PORTIO commands non-standard
+ Use -g instead of -gstabs in AFLAGS_DEBUG
+ Patch by Haavard Skinnemoen, 30 Aug 2006
-* Patch by Nicolas Lacressonnière, 12 Nov 2003:
- update for for Atmel AT91RM9200DK development kit:
- - support for environment variables in DataFlash
- - Atmel DataFlash AT45DB1282 support
+ In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
+ matter what the target's preferred debugging format is. This patch
+ simply replaces -gstabs with -g, so that the default debugging format
+ for the architecture is used.
-* Patch by Jeff Carr, 11 Nov 2003:
- add support for new version of 8270 processors
+commit 965829872169c2996023840d98e1d85ad148d629
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Oct 24 13:55:18 2006 +0200
-* Patches by George G. Davis, 05 Nov 2003:
- - only pass the ARM linux initrd tag to the kernel when an initrd
- is actually present
- - update omap1510inn configuration file
+ Fix/workaround broken dependency handling with make 3.81
+ Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
-* Patches by Stephan Linz, 3 Nov 2003:
- - more endianess fixes for LAN91C111 driver
- - CFG_HZ configuration patch for NIOS Cyclone board
+commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Mon Oct 23 22:17:05 2006 +0200
-* Patch by Stephan Linz, 28 Oct 2003:
- fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
+ Fix sequoia separate object direcory building problems.
-* Patch by Steven Scholz, 20 Oct 2003:
- - make "mii info <addr>" show infor for PHY at "addr" only
- - Endian fix for miiphy_info()
+commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 20 17:16:35 2006 -0500
-* Patch by Gleb Natapov, 19 Sep 2003:
- Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
+ Use generic I2C register block on 85xx and 86xx.
-* Patch by Anders Larsen, 17 Sep 2003:
- Bring ARM memory layout in sync with the documentation:
- stack and malloc-heap are now located _below_ the U-Boot code
+ Replace private IMMAP I2C structures with generic reg block
+ and allow 86xx to have multiple I2C device busses.
-* Accelerate booting on TRAB board: read and check autoupdate image
- headers first instead of always reading the whole images.
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix type in MPC5XXX code (pointed out by Victor Wren)
+commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 20 15:54:34 2006 -0500
-* Enabled password check on RMU board
+ Fix compilation warnings on a few 85xx boards.
-* Fix configuration problem with IceCube in LOWBOOT configuration:
- envrionment got embedded, corrupting the image layout.
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix NEC display names (it's 6440 [for 640x480], not 6640).
+commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 20 15:50:15 2006 -0500
-* Added BMS2003 board
- add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
+ Converted all 85xx boards to use a common FSL I2C driver.
+ Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
+ And removed hard i2c path from a few u-boot.lds scipts too.
+ Minor whitespace cleanups along the way.
-* Fix flash driver for TRAB board (must use Unlock Bypass Reset
- command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
- and CPLD
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
- recent tools
+commit 4d45f69e362b05892c9e92a7907e5820995612aa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 19 12:02:24 2006 -0500
-* Add checksum verification to 'imls' command
+ Rewrite a series of goto statements as a sequences of
+ conditional expressions instead.
-* Add bd_info fields needed for 4xx Linux I2C driver
+ Use consistent return code 0/-1 for good/bad indicators.
-* Patch by Martin Krause, 4 Nov. 2003:
- Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
+ Include one fewer file if the driver isn't used at all.
-* Print used network interface when CONFIG_NET_MULTI is set
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Bernhard Kuhn, 28 Oct 2003:
- Add low boot support for MPC5200
+commit 7237c033b02fe295880435f1eb80819a0c987532
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 19 11:02:16 2006 -0500
-* Fix problem with dual PCMCIA support (NSCU)
+ Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
-* Fix MPC5200 I2C initialization function
+ in an effort to begin to unify the umpteen FSL I2C drivers that
+ are all otherwise very similar.
-======================================================================
-Changes for U-Boot 1.0.0:
-======================================================================
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix parameter passing to standalone images with bootm command
+commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 19 11:33:52 2006 -0500
-* Patch by Kyle Harris, 30 Oct 2003:
- Fix build errors for ixdp425 board
+ * Fix a bunch of compiler warnings for gcc 4.0
-* Patch by David M. Horn, 29 Oct 2003:
- Fixes to build under CYGWIN
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Get IceCube MGT5100 working (again)
+commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 17 06:14:31 2006 +0200
-* Fix problems in memory test on some boards (which was not
- non-destructive as intended)
+ Add monitor functions for indirect access to PPC440 DCR's
+ Patch by Leonid Baryudin, 12 Oct 2006
-* Patch by Gary Jennejohn, 28 Oct 2003:
- Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
- to prevent stack overflow on ARM systems
+commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Oct 13 16:47:53 2006 -0500
-* Patch by Stephan Linz, 28 Oct 2003:
- fix init sequence error for NIOS port
+ Fixed leading whitespace issues.
+ Removed spurious LAWAR thing.
-* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add CONFIG_VERSION_VARIABLE to TRAB configuration
+commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Oct 12 10:42:36 2006 -0500
-* Patch by Xiao Xianghua, 23 Oct 2003:
- small patch for mpc85xx
+ Remove unneeded include files and local variable.
-* Fix small problem in MPC5200 I2C driver
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix FCC3 support on ATC board
+commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Oct 10 00:23:32 2006 -0600
-* Correct header printing for multi-image files in do_bootm()
+ Fix possible uninitialized variable compiler warning.
-* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
+ When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
+ do_bootm_linux() may be uninitialized. There is no possibility in the
+ current code that len will get used uninitialized, but this fix follows
+ the existing convention of setting both len and data to zero at the same
+ time.
-* Fix PCI problems on PPChameleon board
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-* Patch by Steven Scholz, 18 Oct 2003:
- Fix AT91RM9200 ethernet driver
+commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Oct 11 15:13:01 2006 -0500
-* Patch by Nye Liu, 17 Oct 2003:
- Fix typo in include/mpc8xx.h
+ * Fix a bunch of compiler warnings for gcc 4.0
-* Patch by Richard Woodruff, 16 Oct 03:
- Fixes for cpu/arm925/interrupt.c
- - Initialize timestamp & lastdec vars.
- - fix timestamp overflows.
- - fix lastdec overflow.
- - smarter normalization to allow udelay() below 1ms to work.
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Patch by Scott McNutt, 16 Oct
- add networking support for the Altera Nios Development Kit,
- Cyclone Edition (DK-1C20)
+commit bf651baa365e5447246aad6a633ccd667cf24a39
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Oct 11 10:10:43 2006 -0500
-* Patch by Jon Diekema, 14 Oct 2003:
- add hint about doc/README.silent to README file
+ Move "ar" flags to config.mk to allow for silent "make -s"
-* Add CompactFlash support for NSCU
+commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:19:03 2006 -0500
-* Fix PCI problems on PPChameleonEVB
+ Coding style changes to remove local varible blocks
+ and reformat a bit nicer.
-* TRAB auto-update: Base decision if we have to strip the image
- header on image type as encoded in the header
- (include image type patch by Martin Krause, 17 Oct 2003)
+commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:16:04 2006 -0500
-* Patches by Xianghua Xiao, 15 Oct 2003:
+ Fix whitespace issues.
- - Added Motorola CPU 8540/8560 support (cpu/85xx)
- - Added Motorola MPC8540ADS board support (board/mpc8540ads)
- - Added Motorola MPC8560ADS board support (board/mpc8560ads)
+commit 7b382b7125f2397cce63253df62f183e3dfa2770
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:14:45 2006 -0500
-* Fix flash timings on TRAB board
+ Fix whitespace issues.
-* Make sure HUSH is initialized for running auto-update scripts
+commit e10390ddd736b0dad1528eec4b0fe35c0827139a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:06:53 2006 -0500
-* Make 5200 reset command _really_ reset the board, without running
- any other code after it
+ Fix whitespace issues.
-* Fix errors with flash erase when range spans across banks
- that are mapped in reverse order
+commit 89875e96ba3f023157bf50d5f8e33bf254964a76
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:03:43 2006 -0500
-* Fix flash mapping and display on P3G4 board
+ Ran lindent and cleaned up whitespace issues.
+ Format for 80-columns too.
-* Patch by Kyle Harris, 15 Jul 2003:
- - add support for Intel IXP425 CPU
- - add support for IXDP425 eval board
+commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Oct 10 17:02:22 2006 -0500
-* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
- for more information
+ Fix whitespace and 80-col issues.
-* Patch by Steven Scholz, 10 Oct 2003
- - Add support for Altera FPGA ACEX1K
+commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:36:51 2006 +0200
-* Patches by Thomas Lange, 09 Oct 2003:
- - fix cmd_ide.c for non ppc boards (read/write functions did not
- add ATA base address)
- - fix for shannon board
- - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
- - Endian swap ATA identity for all big endian CPUs, not just PPC
- - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
- args to linux
- - add support for dbau1x00 board (MIPS32)
+ CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
+ Patch by Stefan Roese, 07 Oct 2006
-* Patch by Sangmoon Kim, 07 Oct 2003:
- add support for debris board
+commit 5bc528fa4da751d472397b308137238a6465afd2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:35:25 2006 +0200
-* Patch by Martin Krause, 09 Oct 2003:
- Fixes for TRAB board
- - /board/trab/rs485.c: correct baudrate
- - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
- udelay(); fix some timing problems with adc controller
- - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
- modify commands: touch and buzzer
+ Update ALPR code (NAND support working now)
+ Patch by Stefan Roese, 07 Oct 2006
-* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
- (quick & dirty workaround for rogue pointer problem in get_vfatname());
- Use direct function calls for auto_update instead of hush commands
+commit 77d5034847d328753b80c46b83f960a14a26f40e
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:33:03 2006 +0200
-* Patch by Scott McNutt, 04 Oct 2003:
- - add support for Altera Nios-32 CPU
- - add support for Nios Cyclone Development Kit (DK-1C20)
+ Remove compile warnings in fpga code
+ Patch by Stefan Roese, 07 Oct 2006
-* Patch by Steven Scholz, 29 Sep 2003:
- - A second parameter for bootm overwrites the load address for
- "Standalone Application" images.
- - bootm sets environment variable "filesize" to the resulting
- (uncompressed) data length for "Standalone Application" images
- when autostart is set to "no". Now you can do something like
- if bootm $fpgadata $some_free_ram ; then
- fpga load 0 $some_free_ram $filesize
- fi
+commit f3443867e90d2979a7dd1c65b0d537777e1f9850
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 7 11:30:52 2006 +0200
-* Patch by Denis Peter, 25 Sept 2003:
- add support for the MIP405 Rev. C board
+ Add CONFIG_BOARD_RESET to configure board specific reset function
+ Patch by Stefan Roese, 07 Oct 2006
-* Patch by Yuli Barcohen, 25 Sep 2003:
- add support for Zephyr Engineering ZPC.1900 board
+commit f55df18187e7a45cb73fec4370d12135e6691ae1
+Author: John Traill <john.traill@freescale.com>
+Date: Fri Sep 29 08:23:12 2006 +0100
-* Patch by Anders Larsen, 23 Sep 2003:
- add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
- implemented for the x86 architecture)
+ Fix missing tCycle/modfreq calculation.
-* Patch by Sangmoon Kim, 23 Sep 2003:
- fix pll_pci_to_mem_multiplier table for MPC8245
+ Signed-off-by: John Traill <john.traill@freescale.com>
-* Patch by Anders Larsen, 22 Sep 2003:
- enable timed autoboot on PXA
+commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Sep 13 10:33:35 2006 -0500
-* Patch by David Müller, 22 Sep 2003:
- - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
- returns correct libgcc file path
- - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
- time on s3c24x0 systems
+ Updated config headers to add default FDT-based booting
-* Patch by Jon Diekema, 19 Sep 2003:
- - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
- link state to the fault LED.
- - In NetLoop, make the Fault LED reflect the link status. The link
- status gets updated on entry, and on timeouts.
+commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Sep 13 10:34:18 2006 -0500
-* Patch by Anders Larsen, 18 Sep 2003:
- allow mkimage to build and run on Cygwin-hosted systems
+ Add support for eTSEC 3 & 4 on 8548 CDS
-* Patch by Frank Müller, 18 Sep 2003:
- use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
- cpu/mpc8xx/fec.c
+ * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
+ This will only work on rev 1.3 boards (but doesn't break older boards)
+ * Cleaned up some comments to reflect the expanded role of tsec
+ in other systems
-* Patch by Pantelis Antoniou, 16 Sep 2003:
- add tool to compute fileds in the PLPRCR register for MPC86x
+commit 084d648b109c8984f83674043c1a7fa3885ef801
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Sep 13 10:33:56 2006 -0500
-* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
+ Added code to support 2.6.18 PCI changes in u-boot
-* Fix build problems under FreeBSD
+ * Added code to swizzle the IRQ map for the PCI
-* Add generic filesystem image type
+commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Sep 19 09:34:10 2006 -0500
-* Make fatload set filesize environment variable
+ Modified makefile for new build mechanism.
-* enable basic / medium / high-end configurations for PPChameleonEVB
- board; fix NAND code
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* enable TFTP client code to specify to the server the desired
- timeout value (see RFC-2349)
+commit d14ba6a798beb753e7a864500414fcc2d198b8bc
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Sep 14 08:40:36 2006 -0500
-* Improve SDRAM setup for TRAB board
+ Handle 86xx SVR values according to the new Reference Manual.
+ Both 8641 and 8641D have SVR == 0x8090, and are distinguished
+ by the byte in bits 16-23 instead.
+ Thanks to Jason Jin for noticing.
-* Suppress all output with splashscreen configured only if "splashimage"
- is set
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix problems with I2C support for mpc5200
+commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Mon Aug 28 14:25:31 2006 +0800
-* Adapt TRAB configuration and auto_update to new memory layout
+ Fixed an OF-tree off-by-one bug when adding a new property name.
+ This bug will cause the kernel booting to pause a long time.
-* Add configuration for wtk board
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
-* Add support for the Sharp LQ065T9DR51U LCD display
+commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 29 11:05:09 2006 -0500
-* Patch by Rune Torgersen, 17 Sep 2003:
- - Fixes for MPC8266 default config
- - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
+ Remove trailing empty lines.
-* Patches by Jon Diekema, 17 Sep 2003:
- - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
- env_common.c)
- - sbc8260 tweaks
- - adjust "help" output
+commit cd6d73d5b895a5935ac4fde0a356288142a584e0
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 29 09:48:49 2006 -0500
-* Patches by Anders Larsen, 17 Sep 2003:
- - fix spelling errors
- - set GD_FLG_DEVINIT flag only after device function pointers
- are valid
- - Allow CFG_ALT_MEMTEST on systems where address zero isn't
- writeable
- - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
- - trigger watchdog while waiting in serial driver
+ Remove bogus msync and use volatile asm.
-* Add auto-update code for TRAB board using USB memory sticks,
- support new configuration with more memory
+commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 29 08:17:14 2006 -0500
-* disable MPC5200 bus pipelining as workaround for bus contention
+ Add myself as maintainer for MPC8641HPCN.
-* Modify XLB arbiter priorities on MPC5200 so all devices use same
- priority; configure critical interrupts to be handled like external
- interrupts
+commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Mon Aug 28 14:25:31 2006 +0800
-* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
- go back to 66 MHz for stability
+ Fixed an OF-tree off-by-one bug when adding a new property name.
+ This bug will cause the kernel booting to pause a long time.
-* Patches by Jon Diekema, 15 Sep 2003:
- - add description for missing CFG_CMD_* entries in the README file
- - sacsng tweaks
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-* Patch by Gleb Natapov, 14 Sep 2003:
- enable watchdog support for all MPC824x boards that have a watchdog
+commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Aug 25 14:38:34 2006 -0400
-* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
- "Non-octet Aligned Frame" errors we see at 100 Mbps
+ Change ramdiskaddr and dtbaddr
+ Remove PEX fluff commands.
-* Patch by Sharad Gupta, 14 Sep 2003:
- fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by llandre, 11 Sep 2003:
- update configuration for PPChameleonEVB board
+commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Aug 23 13:32:45 2006 -0500
-* Patch by David Müller, 13 Sep 2003:
- various changes to VCMA9 board specific files
+ * Another small fix for booting with disable_of
-* Add I2C support for MGT5100 / MPC5200
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Patch by Rune Torgersen, 11 Sep 2003:
- Changed default memory option on MPC8266ADS to NOT be Page Based
- Interleave, since this doesn't work very well with the standard
- 16MB DIMM
+commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 23 11:04:43 2006 -0500
-* Patch by George G. Davis, 12 Sep 2003:
- fix Makefile settings for sk98 driver
+ Cleanup and lindent new AHCI driver.
-* Patch by Stefan Roese, 12 Sep 2003:
- - new boards added: DP405, HUB405, PLU405, VOH405
- - some esd boards updated
- - cpu/ppc4xx/sdram.c: disable memory controller before setting
- first values
- - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
+commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
+Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
+Date: Wed Aug 23 19:15:12 2006 +0800
-* Patch by Martin Krause, 11 Sep 2003:
- add burn-in tests for TRAB board
+ Add AHCI define and sata support for MPC8641HPCN board.
-* Enable instruction cache on MPC5200 board
+ Signed-off-by:Jason Jin<jason.jin@freescale.com>
-* Patch by Denis Peter, 11 Sep 2003:
- - fix USB data pointer assignment for bulk only transfer.
- - prevent to display erased directories in FAT filesystem.
+commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
+Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
+Date: Wed Aug 23 19:10:44 2006 +0800
-* Change output format for NAND flash - make it look like for other
- memory, too
+ Add AHCI support to u-boot
-======================================================================
-Changes for U-Boot 0.4.8:
-======================================================================
+ Add AHCI support in u-boot, enable the sata disk controllers which
+ following the AHCI protocol.
-* Add I2C and RTC support for RMU board
+ Signed-off-by:Jason Jin<jason.jin@freescale.com>
-* Patches by Denis Peter, 9 Sep 2003:
- add FAT support for IDE, SCSI and USB
+commit d8ea2acf5f137cae99417df4f573d036ee384668
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Aug 23 17:54:32 2006 +0800
-* Patches by Gleb Natapov, 2 Sep 2003:
- - cleanup of POST code for unsupported architectures
- - MPC824x locks way0 of data cache for use as initial RAM;
- this patch unlocks it after relocation to RAM and invalidates
- the locked entries.
+ Add dtb boot-up parameter to default boot commands.
-* Patch by Gleb Natapov, 30 Aug 2003:
- new I2C driver for mpc107 bridge. Now works from flash.
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-* Patch by Dave Ellis, 11 Aug 2003:
- - JFFS2: fix typo in common/cmd_jffs2.c
- - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
- - JFFS2: remove node version 0 warning
- - JFFS2: accept JFFS2 PADDING nodes
- - SXNI855T: add AM29LV800 support
- - SXNI855T: move environment from EEPROM to flash
- - SXNI855T: boot from JFFS2 in NOR or NAND flash
+commit b93775c2036b99baa390ea425c4771895bbc63c4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 18:26:08 2006 -0500
-* Patch by Bill Hargen, 11 Aug 2003:
- fixes for I2C on MPC8240
- - fix i2c_write routine
- - fix iprobe command
- - eliminates use of global variables, plus dead code, cleanup.
+ Cleanup even more poorly introduced whitespace.
-* Add support for USB Mass Storage Devices (BBB)
- (tested with USB memory sticks only)
+commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 18:07:00 2006 -0500
-* Avoid flicker on TRAB's VFD
+ Cleanup more poorly introduced whitespace.
-* Add support for SK98xx driver
+commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 17:54:05 2006 -0500
-* Add PCI support for SL8245 board
+ Cleanup poorly introduced whitespace.
-* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
- or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
- Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
+commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 12:25:27 2006 -0500
-* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
- to allow for more accurate baudrate settings
- (error now 0.7% at 115 kbps, instead of 3.5% before)
+ General indent and whitespace cleanups.
-* Patch by Andreas Mohr, 4 Sep 2003:
- Fix a lot of spelling errors
+commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 12:06:18 2006 -0500
-* Add support for PPChameleon Eval Board
+ General indent and whitespace cleanups.
-* Add support for P3G4 board
+commit 41a0e8b304d3ff55fe27a230507aac79684016ac
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 22 10:42:21 2006 -0500
-* Fix problem with MGT5100 FEC driver: add "early" MAC address
- initialization
+ Cleanup compiler warnings.
-* Patch by Yuli Barcohen, 7 Aug 2003:
- check BCSR to detect if the board is configured in PCI mode
+commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
+Author: Matthew McClintock <msm@freescale.com>
+Date: Tue Aug 22 09:31:59 2006 -0500
-======================================================================
-Changes for U-Boot 0.4.7:
-======================================================================
+ Fix disable_of booting
-* Patch by Raghu Krishnaprasad, 7 Aug 2003:
- add support for Adder II MPC852T module
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Patch by George G. Davis, 19 Aug 2003:
- fix TI Innovator/OMAP1510 pin configs
+commit 87a449c8ac396420cb24260f717ea9e6faa82047
+Author: Matthew McClintock <msm@freescale.com>
+Date: Tue Aug 22 09:23:55 2006 -0500
-* Patches by Kshitij, 18 Aug 2003
- - add support for arm926ejs cpu core
- - add support for TI OMAP 1610 Innovator Board
+ Support for FDT in uImage format, error when using FDT from flash
-* Patch by Yuli Barcohen, 14 Aug 2003:
- add support for bzip2 uncompression
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Add GCC library to examples/Makefile so GCC utility functions will
- be resolved, too
+commit 75c299c38369d01addd5e054b8a16217b70f4a86
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:12:55 2006 -0400
-* Add I2C and RTC support for RMU board using software I2C driver
- (because of better response to iprobe command); fix problem with
- "reset" command
+ Unlock cache before kernel starts up for MPC86xx
-* Patch by Matthias Fuchs, 28 Aug 2003:
- Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
- CONFIG_BOOTP_MAKS (see README).
+commit 67256678f00c09b0a7f19e862e5c1847553d31bc
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:13:15 2006 -0400
-* Fix ICU862 environment problem
+ Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
-* Fix RAM size detection for RMU board
+commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:12:55 2006 -0400
-* Implement "reset" for MGT5100/MPC5200 systems
+ Unlock cache before kernel starts up for MPC86xx
-======================================================================
-Changes for U-Boot 0.4.6:
-======================================================================
+commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Aug 15 15:13:15 2006 -0400
-* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
- allow selection of clock frequency as "make" target
+ Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
-* Implement memory autosizing code for IceCube boards
+commit 86c8e17f25e972a7e272950a0735fad84e082b88
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Aug 16 13:59:47 2006 -0500
-* Configure network port on INCA-IP for autonegotiation
+ * Fix disable_of booting
-* Fix overflow problem in network timeout code
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Patch by Richard Woodruff, 8 Aug 2003:
- Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
+commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Aug 16 10:54:09 2006 -0500
-======================================================================
-Changes for U-Boot 0.4.5:
-======================================================================
+ * Support for FDT in uImage format, error when using FDT from flash
-* Update for TQM board defaults:
- disable clocks_in_mhz, enable boot count limit
+ Signed-off-by: Matthew McClintock <msm@freescale.com>
-* Removed tools/gdb from "make all" target. Added make target "gdbtools"
- in toplevel directory instead. Removed astest.c from tools/gdb because
- it is no longer relevant.
+commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:22:35 2006 +0200
-* Fix PCI support for MPC5200 / IceCube Board
+ Add initial support for the ALPR board from Prodrive
+ NAND needs some additional testing
+ Patch by Heiko Schocher, 15 Aug 2006
-* Map ISP1362 USB OTG controller for NSCU board
+commit f0ff4692ff3372dec55074a8eb444943ab095abb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 15 14:15:51 2006 +0200
-* Patch by Brad Parker, 02 Aug 2003:
- fix sc520_cdp problems
+ Add FPGA Altera Cyclone 2 support
+ Patch by Heiko Schocher, 15 Aug 2006
-* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
+commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 14 15:33:38 2006 -0500
-* Allow erase command to cross flash bank boundaries
+ Fix BAT0 to actually be cacheable, non-guarded as documented.
-* Patch by Scott McNutt, 21 Jul 2003:
- Add support for LynuxWorks Kernel Downloadable Images (KDIs).
- Both LynxOS and BlueCat linux KDIs are supported.
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Richard Woodruff, 25 Jul 2003:
- use more reliable reset for OMAP/925T
+commit 40bc83559db5745681909fd7382ae509567e116d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Aug 9 15:32:16 2006 -0500
-* Patch by Nye Liu, 25 Jul 2003:
- fix typo in mpc8xx.h
+ Removed MPC8641HPCN DTS source file from build.
+ It is no longer linked into U-Boot; its sources are
+ now located in the kernel tree.
-* Patch by Richard Woodruff, 24 Jul 2003:
- Fixes for cmd_nand.c:
- - Fixed null dereferece which could result in incorrect ECC values.
- - Added support for devices with no Ready/Busy signal hooked up.
- - Added OMAP1510 read/write protect handling.
- - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
- for non-JFFS2.
- - Switched default ECC to be JFFS2.
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Allow crc32 to be used at address 0x000
+commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:47:03 2006 -0500
-* Provide consistent interface to standalone applications to access
- the 'global_data' structure
- Provide a doc/README.standalone more useful to users/developers.
+ * Switched default PCI speed for 8540 ADS back to 33MHz
-* Make IceCube MGT5100 FEC driver work
+ * Added comments and a printf to warn that PCI-X won't
+ work at 33MHz
+ Patch by Andy Fleming 17-Mar-2006
-* Implement new mechanism to export U-Boot's functions to standalone
- applications: instead of using (PPC-specific) system calls we now
- use a jump table; please see doc/README.standalone for details
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Dave Westwood, 24 Jul 2003:
- added support for Unity OS (a proprietary OS)
+commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:35 2006 -0500
-* Patch by Detlev Zundel, 23 Jul 2003:
- add "imls" command to print flash table of contents
+ * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
-* Fix cold boot detection for log buffer reset
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Return error for invalid length specifiers with "cp.X" etc.
+commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:13 2006 -0500
-* Fix startup problem on MIPS
+ * Added VIA configuration table
-* Allow for CONFIG_SPLASH_SCREEN even when no explicit
- bitmap support is configured
+ * Added support for PCI2 on CDS
+ Patch by Andy Fleming 17-Mar-2006
-* Patch by Bill Hargen, 18 Jul 2003:
- - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Denis Peter, 18 Jul 2003:
- - fix memory configuration for MIP405T
- - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
+commit c88f9fe66b64247e5b6a38410ba315ca25596d16
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:41 2006 -0500
-* Cleanup of TQM82xx configurations; use "official" board types
- to make selection easier.
+ * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
-* Patch by Martin Krause, 17 Jul 2003:
- add delay to get I2C working with "imm" command and s3c24x0_i2c.c
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Richard Woodruff, 17 July 03:
- - Fixed bug in OMAP1510 baud rate divisor settings.
+commit 97074ed9655309b64231bc2cee69fe85399f8055
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:17 2006 -0500
-* Patch by Nye Liu, 16 July 2003:
- MPC860FADS fixes:
- - add MPC86xADS support (uses MPC86xADS.h)
- - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
- o PLPRCR changes
- o BRG changes (EXTAL/XTAL restricted to 10MHz)
- o don't trust gclk() software measurement by default, depend on
- CONFIG_8xx_GCLK_FREQ
- - add DRAM SIMM not installed detection
- - use more "correct" SDRAM initialization sequence
- - allow different SDRAM sizes (8xxADS has 8M)
- - default DER is 0
- - remove unused MAMR defines from FADS860T.h (all done in fads.c)
- - rename MAMR/MBMR defines to be more consistent. Should eventually
- be merged into MxMR to better reflect the PowerQUICC datasheet.
+ * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
-* Patch by Yuli Barcohen, 16 Jul 2003:
- support new Motorola PQ2FADS-ZU evaluation board which replaced
- MPC8260ADS and MPC8266ADS
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-======================================================================
-Changes for U-Boot 0.4.4:
-======================================================================
+commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:49 2006 -0500
-* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
+ * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
-* Add support for MGT5100 and MPC5200 processors
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Lutz Dennig, 15 Jul 2003:
- update for R360MPI board
+commit a4e11558b810ef2cddffdf7b9d86bc1130441960
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:23 2006 -0500
-======================================================================
-Changes for U-Boot 0.4.3:
-======================================================================
+ * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
-* Patches by Kshitij, 04 Jul 2003
- - added support for arm925t cpu core
- - added support for TI OMAP 1510 Innovator Board
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patches by Martin Krause, 14 Jul 2003:
- - add I2C support for s3c2400 systems (trab board)
- - (re-) add "ping" to command table
+commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:36 2006 -0500
-* Fix handling of "slow" POST routines
+ * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
-* Patches by Yuli Barcohen, 13 Jul 2003:
- - Correct flash and JFFS2 support for MPC8260ADS
- - fix PVR values and clock generation for PowerQUICC II family
- (8270/8275/8280)
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Bernhard Kuhn, 08 Jul 2003:
- - add support for M68K targets
+commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:00 2006 -0500
-* Patch by Ken Chou, 3 Jul:
- - Fix PCI config table for A3000
- - Fix iobase for natsemi.c
- (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
+ * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
-* Allow to enable "slow" POST routines by key press on power-on
-* Fix temperature dependend switching of LCD backlight on LWMON
-* Tweak output format for LWMON
+commit 5498d90312aad9f6bdbf047986027c35b03cd163
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:42:24 2006 -0500
-* Patch by Stefan Roese, 11 Jul 2003:
- - Fix bug in CONFIG_VERSION_VARIABLE.
- - AR405 config updated.
- - OCRTC/ORSG: bsp command added.
- - ASH405 bsp update.
+ * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
-======================================================================
-Changes for U-Boot 0.4.2:
-======================================================================
+commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:41:37 2006 -0500
-* Add support for NSCU board
+ * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
-* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
+commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
+Author: John Traill <john.traill@freescale.com>
+Date: Wed Aug 9 14:33:50 2006 +0100
-* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
- mirror bit flash on TQM8xxM modules
+ Add Rapidio support for the MPC8641HPCN
-* Patch by Kenneth Johansson, 30 Jun 2003:
- get rid of MK_CMD_ENTRY macro; update doc/README.command
+ Signed-off-by: John Traill <john.traill@freescale.com>
-* Patch by Seb James, 30 Jun 2003:
- Improve documentation of I2C configuration in README
+commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
+Author: John Traill <john.traill@freescale.com>
+Date: Tue Aug 8 11:32:43 2006 +0100
-* Fix problems with previous log buffer "fixes"
+ Fix caslat calculation
-* Fix minor help text issues
+ Signed-off-by: John Traill <john.traill@freescale.com>
-* "log append" did not append a newline
+commit 709d3073e74153278e7904a70819bbef7df50e1a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Aug 3 16:17:56 2006 -0500
-======================================================================
-Changes for U-Boot 0.4.1:
-======================================================================
-
-* Fix some missing commands, cleanup header files
- (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
-
-* Rewrite command lookup and help command (fix problems with bubble
- sort when sorting command name list). Minor cleanup here and there.
-
-* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
- - Allow to call sysmon function interactively
- - PIC on LWMON board needs delay after power-on
- - Add missing RSR definitions for MPC8xx
- - Improve log buffer handling: guarantee clean reset after power-on
- - Add support for EXBITGEN board (aka "genie")
- - Add support for SL8245 board
-
-* Code cleanup:
- - remove trailing white space, trailing empty lines, C++ comments, etc.
- - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
-
-* Patches by Kenneth Johansson, 25 Jun 2003:
- - major rework of command structure
- (work done mostly by Michal Cendrowski and Joakim Kristiansen)
-
-======================================================================
-Changes for U-Boot 0.4.0:
-======================================================================
-
-* Patches by Robert Schwebel, 26 Jun 2003:
- - csb226 configuration updated
- - credits for logodl port updated
- - innokom configuration updated
- - logodl tree update, still with coding style inconsistencies
- - added OCM for ppc405 warning to README
-
-* Patch by Pantelis Antoniou, 25 Jun 2003:
- update NetVia with V2 board support
-
-* Header file cleanup for ARM
-
-* Patch by Murray Jensen, 24 Jun 2003:
- - make sure to use only U-boot provided header files
- - fix problems with ".rodata.str1.4" section as used by GCC-3.x
-
-* Patch by Stefan Roese, 24 Jun 2003:
- - Update esd ASH405 board files.
- - Update esd DASA_SIM config file.
- - Add ping command to some esd boards.
-
-* Patch by Yuli Barcohen, 23 Jun 2003:
- Update for MPC8260ADS board
-
-* Patch by Murray Jensen, 23 Jun 2003:
- - cleanup of GCC 3.x compiler warnings
-
-* Patch by Rune Torgersen, 4 Jun 2003:
- add large memory support for MPC8266ADS board
-
-* Patch by Richard Woodruff, 19 June 03:
- - Enabled standard u-boot device abstraction for ARM
- - Enabled console device for ARM
- - Initilized bi_baudrate for ARM
-
-* Patch by Bill Hargen, 23 Apr 2003:
- fix byte order for 824x I2C addresses (write op)
-
-* Patch by Murray Jensen, 20 Jun 2003:
- - hymod update
- - cleanup (especially for gcc-3.x compilers)
-
-* Patch by Tom Guilliams, 20 Jun 2003:
- added CONFIG_750FX support for IBM 750FX processors
-
-* Patch by Devin Crumb, 02 Apr 2003:
- Fix clock divider rounding problem in drivers/serial.c
-
-* Patch by Richard Woodruff, 19 June 03:
- - Fixed smc91c111 driver to sync with the u-boot environment
- (driver/smc91c111.c).
- - Added eth_init error return check in NetLoop (net/net.c).
-
-* Patch by Ken Chou, 19 June 2003:
- Added support for A3000 SBC board (Artis Microsystems Inc.)
-
-* Patches by Murray Jensen, 17 Jun 2003:
- - Hymod board database mods: add "who" field and new xilinx chip types
- - provide new "init_cmd_timeout()" function so code external to
- "common/main.c" can use the "reset_cmd_timeout()" function before
- entering the main loop
- - add DTT support for adm1021 (new file dtt/adm1021.c; config
- slightly different. see include/configs/hymod.h for an example
- (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
- CFG_DTT_ADM1021 defined)
- - add new "eeprom_probe()" function which has similar args and
- behaves in a similar way to "eeprom_read()" etc.
- - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
- function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- - gdbtools copyright update
- - ensure that set_msr() executes the "sync" and "isync" instructions
- after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- - 8260 I/O ports fix: Open Drain should be set last when configuring
- - add SIU IRQ defines for 8260
- - allow LDSCRIPT override and OBJCFLAGS initialization: change to
- config.mk to allow board configurations to override the GNU
- linker script, selected via the LDSCRIPT, make variable, and to
- give an initial value to the OBJCFLAGS make variable
- - 8260 i2c enhancement:
- o correctly extends the timeout depending on the size of all
- queued messages for both transmit and receive
- o will not continue with receive if transmit times out
- o ensures that the error callback is done for all queued tx
- and rx messages
- o correctly detects both tx and rx timeouts, only delivers one to
- the callback, and does not overwrite an earlier error
- o logic in i2c_probe now correct
- - add "vprintf()" function so that "panic()" function can be
- technically correct
- - many Hymod board changes
-
-* Patches by Robert Schwebel, 14 Jun 2003:
- - add support for Logotronic DL datalogger board
- - cleanup serial line after kermit binary download
- - add debugX macro (debug level support)
- - update mach-types.h to latest arm.linux.org.uk master list.
-
-* Patches by David Müller, 12 Jun 2003:
- - rewrite of the S3C24X0 register definitions stuff
- - "driver" for the built-in S3C24X0 RTC
-
-* Patches by Yuli Barcohen, 12 Jun 2003:
- - Add MII support and Ethernet PHY initialization for MPC8260ADS board
- - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
- configuration word supplied by FPGA on some MPC8260ADS boards
-
-* Patch by Pantelis Antoniou, 10 Jun 2003:
- Unify status LED interface
-
-* Add support for DS12887 RTC; add RTC support for ATC board
-
-* Patch by Nicolas Lacressonniere, 11 Jun 2003:
- Modifications for Atmel AT91RM9200DK ARM920T based development kit
- - Add Atmel DataFlash support for reading and writing.
- - Add possibility to boot a Linux from DataFlash with BOOTM command.
- - Add Flash detection on Atmel AT91RM9200DK
- (between Atmel AT49BV1614 and AT49BV1614A flashes)
- - Replace old Ethernet PHY layer functions
- - Change link address
-
-* Patch by Frank Smith, 9 Jun 2003:
- use CRIT_EXCEPTION for machine check on 4xx
-
-* Patch by Detlev Zundel, 13 Jun 2003:
- added implementation of the "carinfo" command in cmd_immap.c
-
-* Fix CONFIG_NET_MULTI support in include/net.h
-
-* Patches by Kyle Harris, 13 Mar 2003:
- - Add FAT partition support
- - Add command support for FAT
- - Add command support for MMC
- ----
- - Add Intel PXA support for video
- - Add Intel PXA support for MMC
- ----
- - Enable MMC and FAT for lubbock board
- - Other misc changes for lubbock board
-
-* Patch by Robert Schwebel, April 02, 2003:
- fix for SMSC91111 driver
-
-* Patch by Vladimir Gurevich, 04 Jun 2003:
- make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
-
-* Patch by Stefan Roese, 05 Jun 2003:
- - PPC4xx: Fix bug for initial stack in data cache as pointed out by
- Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
- data cache can be used even if the chip select is in use.
- - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
- (see README for further description).
- - Changed config files of CONFIG_EEPRO100 boards to use the
- CFG_RX_ETH_BUFFER define.
-
-* Add support for RMU board
-
-* Add support for TQM862L at 100/50 MHz
-
-* Patch by Pantelis Antoniou, 02 Jun 2003:
- major reconstruction of networking code;
- add "ping" support (outgoing only!)
-
-* Patch by Denis Peter, 04 June 2003:
- add support for the MIP405T board
-
-* Patches by Udi Finkelstein, 2 June 2003:
- - Added support for custom keyboards, initialized by defining a
- board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
- - Added support for the RBC823 board.
- - cpu/mpc8xx/lcd.c now automatically calculates the
- Horizontal Pixel Count field.
-
-* Fix alignment problem in BOOTP (dhcp_leasetime option)
- [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
-
-* Patch by Mark Rakes, 14 May 2003:
- add support for Intel e1000 gig cards.
-
-* Patch by Nye Liu, 3 Jun 2003:
- fix critical typo in MAMR definition (include/mpc8xx.h)
-
-* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
-
-* Patch by Klaus Heydeck, 2 Jun 2003
- Minor changes for KUP4K configuration
+ Convert to mac-address in ethernet nodes.
-* Patch by Marc Singer, 29 May 2003:
- Fixed rarp boot method for IA32 and other little-endian CPUs.
+commit 71748af833ca1017edf1415be376366ff2937d17
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Jul 28 12:41:35 2006 -0400
-* Patch by Marc Singer, 28 May 2003:
- Added port I/O commands.
+ Correct the irq value of DUART2
-* Patch by Matthew McClintock, 28 May 2003
- - cpu/mpc824x/start.S: fix relocation code when booting from RAM
- - minor patches for utx8245
+commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Jul 28 12:41:41 2006 -0400
-* Patch by Daniel Engström, 28 May 2003:
- x86 update
+ Change the space size of PEX IO in README
-* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
- add nand flash support to SXNI855T configuration
- fix/extend nand flash support:
- - fix 'nand erase' command so does not erase bad blocks
- - fix 'nand write' command so does not write to bad blocks
- - fix nand_probe() so handles no flash detected properly
- - add doc/README.nand
- - add .jffs2 and .oob options to nand read/write
- - add 'nand bad' command to list bad blocks
- - add 'clean' option to 'nand erase' to write JFFS2 clean markers
- - make NAND read/write faster
+commit 239db37c94f7a92941c4465feceb867c609241c5
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Fri Jul 28 12:41:18 2006 -0400
-* Patch by Rune Torgersen, 23 May 2003:
- Update for MPC8266ADS board
+ Move get_board_sys_clk to board directory
-* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
- instead CFG_MONITOR_LEN is now only used to determine _at_compile_
- _time_ (!) if the environment is embedded within the U-Boot image,
- or in a separate flash sector.
+commit 492900b985439fbce1a118afde1e35def870db03
+Author: John Traill <john.traill@freescale.com>
+Date: Fri Jul 28 09:03:54 2006 +0100
-* Cleanup CFG_DER #defines in config files (wd maintained only)
+ Fix 8641HPCN pollution
-* Fix data abort exception handling for arm920t CPU
+commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
+Author: John Traill <john.traill@freescale.com>
+Date: Fri Jul 28 08:16:06 2006 +0100
-* Fix alignment problems with flash driver for TRAB board
+ Fix 8641HPCN timebase
-* Patch by Donald White, 21 May 2003:
- fix calculation of base address in pci_hose_config_device()
+commit c86360b830f1eecd7a72208575dde4f57879faea
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Fri Jul 28 00:01:34 2006 +0800
-* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
- execute "cmd2", even if "cmd1" fails. Note that this is different
- to "run var1 var2" where the contents of "var2" will NOT be
- executed when a command in "var1" fails.
+ Fixed OF device tree of mpc86xxhpcn board.
-* Add zero-copy ramdisk support (requires corresponding kernel support!)
+ The changes works in with kernel irq mapping rework.
-* Patch by Kyle Harris, 20 May 2003:
- In preparation for an ixp port, rename cpu/xscale and arch-xscale
- into cpu/pxa and arch-pxa.
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
-* Patch by Stefan Roese, 23 May 2003:
- - IBM PPC405EP port added.
- - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
- UART0) is used as default U-Boot console. PPC4xx only!
- - esd ASH405 board added (PPC405EP based).
- - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
- - esd CPCI405AB board added.
- - esd PMC405 board added.
- - Update of some esd boards.
+commit bea3f28d285942bf3f7ab339ce85178ded544225
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Wed Jul 12 10:48:05 2006 -0400
-* Patch by Denis Peter, 19 Mai 2003:
- add support for the MIP405-3 board
+ Add support for reading and writing mac addresses to or from ID EEPROM.
-* Patch by Dave Ellis, 22 May 2003:
- Fix problem with only partially cleared .bss segment
+ Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
+ With attached patch, we can use command "mac/mac read/mac save/"
+ to read and write EEPROM under u-boot prompt.
-* Patch by Rune Torgersen, 12 May 2003:
- get PCI to work on a MPC8266ADS board; incorporate change to
- cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
+ U-boot will calculate the checksum of EEPROM while bootup,
+ if it is right, then u-boot will check whether the mac address
+ of eTSEC0/1/2/3 is availalbe (non-zero).
-* Patch by Nye Liu, 1 May 2003:
- minor patches for the FADS8xx
+ If there is mac address availabe in EEPROM, u-boot will use it,
+ otherewise, u-boot will use the mac address defined in
+ MPC8641HPCN.h. This matches the requirement to set unique mac address
+ for each TSEC port.
-* Patch by Thomas Schäfer, 28 Apr 2003:
- Fix SPD handling for 256 ECC DIMM on Walnut
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: York Sun <yorksun@freescale.com>
-* Add support for arbitrary bitmaps for TRAB's VFD command;
- allow to pass boot bitmap addresses in environment variables;
- allow for zero boot delay
+commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
+Author: Jin Zhengxiong <Jason.Jin@freescale.com>
+Date: Thu Jul 13 10:35:10 2006 -0500
-* Patch by Christian Geißinger, 19 May 2002:
- On TRAB: wait until the dummy byte has been completely sent
+ Fixed initrd issue by define big RAM
-* Patch by David Updegraff, 22 Apr 2003:
- update for CrayL1 board
+ Signed-off-by:Jason Jin <Jason.jin@freescale.com>
-* Patch by Pantelis Antoniou, 21 Apr 2003:
- add boot support for ARTOS (a proprietary OS)
+commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 7 10:01:45 2006 -0500
-* Patch by Steven Scholz, 11 Apr 2003:
- Add support for RTC DS1338
+ We made a u-boot patch to fix the hang up issue
+ when booting filesystem from ramdisk.
-* Patch by Rod Boyce, 24 Jan 2003:
- Fix counting of extended partitions in diskboot command
+ Signed-off-by:Jason Jin <Jason.jin@freescale.com>
-* Patch by Christophe Lindheimer, 20 May 2003:
- allow the use of CFG_LOADS when CFG_NO_FLASH is set
+commit 38433ccc5850ee70549af0b2bc5b920355ef5388
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:47:03 2006 -0500
-* Fix SDRAM timing on Purple board
+ * Switched default PCI speed for 8540 ADS back to 33MHz
+ * Added comments and a printf to warn that PCI-X won't
+ work at 33MHz
+ Patch by Andy Fleming 17-Mar-2006
-* Add support for CompactFlash on ATC board
- (includes support for Intel 82365 and compatible PC Card controllers,
- and Yenta-compatible PCI-to-CardBus controllers)
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Mathijs Haarman, 08 May 2003:
- Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
+commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:35 2006 -0500
-* Fix problem with usage of "true" (undefined in current versions of bfd.h)
+ * Fixed a bug where 8555 PCI code used the old variable and
+ function names
+ Patch by Andy Fleming 17-Mar-2006
-* Add support for Promess ATC board
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Keith Outwater, 28 Apr 2003:
- - Miscellaneous corrections and additions to GEN860T board specific code.
- - Added GEN860_SC variant to GEN860T.
- - Miscellaneous corrections to GEN860T documentation.
- - Correct duplicate entry in U-Boot CREDITS file.
- - Add GEN860T_SC entry in MAINTAINERS file.
- - Update CREDITS file with GEN860T_SC info.
+commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:46:13 2006 -0500
-* Update Smiths Aerospace addresses in MAINTAINERS file
+ * Added VIA configuration table
+ * Added support for PCI2 on CDS
+ Patch by Andy Fleming 17-Mar-2006
-* Fix error handling in hush's version of "run" command
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* LWMON extensions:
- - Splashscreen support
- - modem support
- - sysmon support
- - temperature dependend enabling of LCD
+commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:41 2006 -0500
-* Allow booting from old "PPCBoot" disk partitions
+ * Fixed PCI memory definitions
+ Patch by Andy Fleming 17-Mar-2006
-* Add support for TQM8255 Board / MPC8255 CPU
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-======================================================================
-Changes for U-Boot 0.3.1:
-======================================================================
+commit 087454609e47295443af793a282cddcd91a5f49c
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:45:17 2006 -0500
-* Make sure Block Lock Bits get cleared in R360MPI flash driver
+ * Added support for initializing second PCI bus on 85xx
+ Patch by Andy Fleming 17-Mar-2006
-* MPC823 LCD driver: Fill color map backwards, to allow for steady
- display when Linux takes over
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Erwin Rol, 27 Feb 2003:
- Add support for RTEMS (this time for real).
+commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:49 2006 -0500
-* Add support for "bmp info" and "bmp display" commands to load
- bitmap images; this can be used (for example in a "preboot"
- command) to display a splash screen very quickly after poweron.
+ * Added PCI-X #defines for PCI-X initialization
+ Patch by Andy Fleming on 17-Mar-2006
-* Add support for 133 MHz clock on INCA-IP board
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Patch by Lutz Dennig, 10 Apr 2003:
- Update for R360MPI board
+commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:44:23 2006 -0500
-* Add new meaning to "autostart" environment variable:
- If set to "no", a standalone image passed to the
- "bootm" command will be copied to the load address
- (and eventually uncompressed), but NOT be started.
- This can be used to load and uncompress arbitrary
- data.
+ * Made sure the code which disables prefetch for PCI devices
+ sets the size of the prefetch region to 0
+ Patch by Andy Fleming on 17-Mar-2006
-* Patch by Stefan Roese, 10 Apr 2003:
- Changed DHCP client to use IP address from server option field #54
- from the OFFER packet in the server option field #54 in the REQUEST
- packet. This fixes a problem using a Windows 2000 DHCP server,
- where the DHCP-server is not the TFTP-server.
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
-* Set max brightness for MN11236 displays on TRAB board
+commit 40d5fa35d02df22580593bf0039ab173367e8ef0
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:36 2006 -0500
-* Add support for TQM862L modules
+ * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
+ Patch by Jon Loeliger 17-Jan-2006
-======================================================================
-Changes for U-Boot 0.3.0:
-======================================================================
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Arun Dharankar, 4 Apr 2003:
- Add IDMA example code (tested on 8260 only)
+commit be7e8b0cb5a0c49dc180075b96df296a893bf146
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:43:00 2006 -0500
-* Add support for Purple Board (MIPS64 5Kc)
+ * Removed the oftree.dts for stxxtx in light of the changes
+ to the flat device tree handling code
+ Patch by Matthew McClintock 26-June-2006
-* Add support for MIPS64 5Kc CPUs
+commit 1b380ec225665e73959677f3893dc658c5925e05
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:42:24 2006 -0500
-* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
+ * Patch to modify ft_build.c to update flat device trees in place
+ Patch by Matthew McClintock 26-June-2006
-* Patch by Denis Peter, 04 Apr 2003:
- - update MIP405-4 board
+commit 98a9c4d468a942a09ebe8979bec508017f3e4462
+Author: Matthew McClintock <msm@freescale.com>
+Date: Wed Jun 28 10:41:37 2006 -0500
-* Patch by Stefan Roese, 4 Apr 2003:
- - U-Boot version environment variable "ver" added
- (CONFIG_VERSION_VARIABLE).
- - Changed PPC405GPr version from A to B.
- - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
+ * Modify bootm command to support booting with flat device trees
+ Patch by Matthew McClintock 26-June-2006
-* Patches by Denis Peter, 03 April 2003:
- - fix PCI IRQs on MPL boards
- - fix two more un-relocated pointer problems
+commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
+Author: Jin Zhengxiong <Jason.Jin@freescale.com>
+Date: Wed Jun 28 08:43:56 2006 -0500
-* Fix behaviour of "run" command:
- - print error message iv variable does not exist
- - terminate processing of arguments in case of error
+ Change Id to symbolic name for RTL8139
-* Patches by Peter Figuli, 10 Mar 2003
- - Add support for BTUART on PXA platform
- - Add support for WEP EP250 (PXA) board
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
-* Fix flash problems on INCA-IP; add tool to allow bruning images to
- flash using a BDI2000
+commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:12:10 2006 +0800
-* Implement fix for I2C Edge Conditions problem for all boards that
- use the bit-banging driver (common/soft_i2c.c)
+ Fix RTL8139 in big endian
-* Patch by Martin Winistoerfer, 23 Mar 2003
- - Add port to MPC555/556 microcontrollers
- - Add support for cmi customer board with
- Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
+ signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ signed-off-by: Wei Zhang <wei.zhang@freescale.com>
-* Patch by Rick Bronson, 28 Mar 2003:
- - fix common/cmd_nand.c
+commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:12:23 2006 +0800
-* Patch by Arun Dharankar, 24 Mar 2003:
- - add threads / scheduler example code
+ Fix Tsec bug when no link
-* Add patches by Robert Schwebel, 31 Mar 2003:
- - add ctrl-c support for kermit download
- - align bdinfo output on ARM
- - csb226 board: bring in sync with innokom/memsetup.S
- - csb226 board: fix MDREFR handling
- - misc doc fixes / extensions
- - innokom board: cleanup, MDREFR fix in memsetup.S, config update
- - add BOOT_PROGRESS to armlinux.c
+ When tftp a non-exist file from the tftp server, u-boot will check
+ the link of all eth port. The original file will return wrong link
+ state on the no link ports.
-* Add CPU ID, version, and clock speed for INCA-IP
+ signed-off-by: Jason Jin <Jason.Jin@freescale.com>
-* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
- - fix SRAM and SDRAM memory sizing
- - add status LED support
- - add MAC address for second (SCC1) ethernet port
+commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:12:02 2006 +0800
-* Update default environment for TQM8260 board
-
-* Patch by Rick Bronson, 16 Mar 2003:
- - Add NAND flash support for reading, writing, and erasing NAND
- flash (certain forms of which are called SmartMedia).
- - Add support for Atmel AT91RM9200DK ARM920T based development kit.
-
-* Patches by Robert Schwebel, 19 Mar 2003:
- - use arm-linux-gcc as default compiler for ARM
- - fix i2c fixup code
- - fix missing baudrate setting
- - added $loadaddr / CFG_LOAD_ADDR support to loadb
- - moved "ignoring trailing characters" _before_ u-boot wants to
- print out diagnostics messages; removes bogus characters at the
- end of transmission
-
-* Patch by John Zhan, 18 Mar 2003:
- Add support for SinoVee Microsystems SC8xx boards
-
-* Patch by Rolf Offermanns, 21 Mar 2003:
- ported the dnp1110 related changes from the current armboot cvs to
- current u-boot cvs. smc91111 does not work. problem marked in
- smc91111.c, grep for "FIXME".
-
-* Patch by Brian Auld, 25 Mar 2003:
- Add support for STM flash chips on ebony board
-
-* Add PCI support for MPC8250 Boards (PM825 module)
-
-* Patch by Stefan Roese, 25 Mar 2003:
- - PCI405 update.
-
-* Patch by Stefan Roese, 20 Mar 2003:
- - CPCI4052 update (support for revision 3).
- - Set edge conditioning circuitry on PPC405GPr for compatibility
- to existing PPC405GP designs.
- - Clip udiv to 5 bits on PPC405 (serial.c).
-
-* Extend INCAIP board support:
- - add automatic RAM size detection
- - add "bdinfo" command
- - pass flash address and size to Linux kernel
- - switch to 150 MHz clock
-
-* Avoid flicker on the TRAB's VFD by synchronizing the enable with
- the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
- boards, version 153 for Rev. 200 boards).
-
-* Patch by Vladimir Gurevich, 12 Mar 2003:
- Fix relocation problem of statically initialized string pointers
- in common/cmd_pci.c
-
-* Patch by Kai-Uwe Blöm, 12 Mar 2003:
- Cleanup & bug fixes for JFFS2 code:
- - the memory mangement was broken. It caused havoc on malloc by
- writing beyond the block boundaries.
- - the length calculation for files was wrong, sometimes resulting
- in short file reads.
- - data copying now optionally takes fragment version numbers into
- account, to avoid copying from older data.
- See doc/README.JFFS2 for details.
-
-* Patch by Josef Wagner, 12 Mar 2003:
- - 16/32 MB and 50/80 MHz support with auto-detection for IP860
- - ETH05 and BEDBUG support for CU824
- - added support for MicroSys CPC45
- - new BOOTROM/FLASH0 and DOC base for PM826
-
-* Patch by Robert Schwebel, 12 Mar 2003:
- Fix the chpart command on innokom board
-
-* Name cleanup:
- mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
- s/PPCBoot/U-Boot/ in some files
- s/pImage/uImage/ in some files
-
-* Patch by Detlev Zundel, 15 Jan 2003:
- Fix '' command line quoting
-
-* Patch by The LEOX team, 19 Jan 2003:
- - add support for the ELPT860 board
- - add support for Dallas ds164x RTC
-
-* Patches by David Müller, 31 Jan 2003:
- - minimal setup for CardBus bridges
- - add EEPROM read/write support in the CS8900 driver
- - add support for the builtin I2C controller in the Samsung s3c24x0 chips
- - add support for MPL's VCMA9 (Samsung s3c2410 based) board
-
-* Patch by Steven Scholz, 04 Feb 2003:
- add support for RTC DS1307
+ Fix bug for io_bar size during pci scan
-* Patch by Reinhard Meyer, 5 Feb 2003:
- fix PLPRCR/SCCR init sequence on 8xx to allow for
- changes of EBDF by software
-
-* Patch by Vladimir Gurevich, 07 Feb 2003:
- "API-compatibility patch" for 4xx I2C driver
+ During the pci scan process, Some devices return bar_reponse with the
+ highest bytes 0, such as the pci bridge in uli1575 return bar_response
+ with 0xffffff, So the bar_size should be manually set under 64K.
-* TRAB fixes / extensions:
- - Restore VFD brightness as saved in environment
- - add support for Fujitsu flashes
- - make sure both buzzers are turned off (drive low level)
+ Signed-off-by: Jason Jin <jason.jin@freescale.com>
-* Patches by Robert Schwebel, 06 Mar 2003:
- - fix bug in BOOTP code (must use NetCopyIP)
- - update of CSB226 port
- - clear BSS segment on XScale
- - added support for i2c_init_board() function
- - update to the Innokom plattform
+commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
+Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
+Date: Tue Jun 27 18:11:54 2006 +0800
-* Extend support for redundand environments for configurations where
- environment size < sector size
+ Enable PCIE1 for MPC8641HPCN board
-* Patch by Rune Torgersen, 13 Feb 2003:
- Add support for Motorola MPC8266ADS board
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
-* Patch by Kyle Harris, 19 Feb 2003:
- patches for the Intel lubbock board:
- memsetup.S - general cleanup (based on Robert's csb226 code)
- flash.c - overhaul, actually works now
- lubbock.c - fix init funcs to return proper value
+commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jun 22 08:51:46 2006 -0500
-* Patch by Kenneth Johansson, 26 Feb 2003:
- - Fixed off by one in RFTA calculation.
- - No need to abort when LDF is lower than we can program it's only
- minimum timing so clamp it to what we can do.
- - Takes function pointer to function for reading the spd_nvram. Usefull
- for faking data or hardcode a module without the nvram.
- - fix other user for above change
- - fix some comments.
+ Fix bug in 8641hpcn reset command with no args.
-* Patches by Brian Waite, 26 Feb 2003:
- - fix port for evb64260 board
- - fix PCI for evb64260 board
- - fix PCI scan
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Reinhard Meyer, 1 Mar 2003:
- Add support for EMK TOP860 Module
+commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Tue Jun 20 17:47:15 2006 +0800
-* Patch by Yuli Barcohen, 02 Mar 2003:
- Add SPD EEPROM support for MPC8260ADS board
+ Reworked IRQ mapping in OF-tree.
-* Patch by Robert Schwebel, 21 Jan 2003:
- - Add support for Innokom board
- - Don't complain if "install" fails
- - README cleanup (remove duplicated lines)
- - Update PXA header files
+commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jun 15 21:33:37 2006 -0500
-* Add documentation for existing POST code (doc/README.POST)
+ Do not enable address translation on secondary CPUs.
+ Do not set up BATs on secondary CPUs. Let Linux do the nasty.
-* Patch by Laudney Ren, 15 Jan 2003:
- Fix handling of redundand environment in "tools/envcrc.c"
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Patch by Detlev Zundel, 28 Feb 2003:
- Add bedbug support for 824x systems
+commit 8ecc971618f56029ad99d3516f8b297a6ed58971
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 7 10:53:55 2006 -0500
-* Add support for 16 MB flash configuration of TRAB board
+ Fix a get_board_sys_clk() use-before-def warning.
-* Patch by Erwin Rol, 27 Feb 2003:
- Add support for RTEMS
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Add image information to README
+commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 7 10:52:49 2006 -0500
-* Patch by Stefan Roese, 18 Feb 2003:
- CPCIISER4 configuration updated.
+ Allow DTC path to be passed in.
-* Patch by Stefan Roese, 17 Feb 2003:
- Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Stefan Roese, 13 Feb 2003:
- Add "pcidelay" environment variable (in ms, enabled via
- CONFIG_PCI_BOOTDELAY).
- PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
- RST# to respond to configuration cycles (33MHz -> 1s).
+commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Tue Jun 6 16:54:29 2006 -0400
-* Fix dual PCMCIA slot support (when running with just one
- slot populated)
+ Modify the IRQ of DUART2
-* Add VFD type detection to trab board
+commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 13:55:35 2006 -0500
-* extend drivers/cs8900.c driver to synchronize ethaddr environment
- variable with value in the EEPROM
+ Review cleanups.
-* Patch by Stefan Roese, 10 Feb 2003:
- Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add support for MIPS32 4Kc CPUs
+commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 12:44:44 2006 -0500
-* Add support for INCA-IP Board
+ White space cleanup.
+ Some 80-column cleanups.
+ Convert printf() to puts() where possible.
+ Use #include "spd_sdram.h" as needed.
+ Enhanced reset command usage message a bit.
-======================================================================
-Changes for U-Boot 0.2.2:
-======================================================================
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Add dual ethernet support on PM826
+commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 11:39:34 2006 -0500
-* Add support for LXT971 PHY on PM826
+ Removed unneeded local_bus_init() from 8641HPCN board.
-* Patch by Tord Andersson, 16 Jan 2003:
- Fix flash sector count for TQM8xxL
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Fix I2C EEPROM problem on ICU862 board (would only write the first
- 16 bytes out of each 32 byte block)
+commit 4d3d729c16c392d2982d3266b659d333c927697d
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 11:24:28 2006 -0500
-======================================================================
-Changes for U-Boot 0.2.1:
-======================================================================
+ Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
-* Add support for V37 board
- (patch by Jón Benediktsson, 11 Dec 2002)
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* Update baudrate in bd_info when it gets changed
+commit b2a941de060350ad15878d8219825f4950e9bb8e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed May 31 10:07:28 2006 -0500
-* Add watchdog trigger points while waiting for serial port
- (so far only 8xx -- needed on LWMON with 100ms watchdog)
+ Remove dead debug code.
-* Improve command line tool to access the U-Boot's environment
- (figuration of the utility, using a config file)
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Add single quote support for (old) command line parser
+commit 126aa70f10ba3d20e0a6f4d32328250513b77770
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue May 30 17:47:00 2006 -0500
-* Switch LWMON board default config from FRAM to EEPROM;
- in POST, EEPROM shows up on 8 addresses
+ Move mpc86xx PIXIS code to board directory
-======================================================================
-Changes for U-Boot 0.2.0:
-======================================================================
+ First cut at moving the PIXIS platform code out of
+ the 86xx cpu directory and into board/mpc8641hpcn
+ where it belongs.
-* Use 1-byte-read instead of -write for iprobe() function
- Add i2c commands to PM826 config
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
-* extend I2C POST code: check for list on known addresses
+commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue May 30 09:10:32 2006 -0500
-* Improve log buffer code; use "loglevel" to decide which messages
- to log on the console, too (like in Linux); get rid of "logstart"
+ Improve "reset" command's interaction with watchdog.
-* Add command line tool to access the U-Boot's environment
- (board-specific for TRAB now, to be fixed later)
+ "reset altbank" will reset another bank WITHOUT watch dog timer enabled
+ "reset altbank wd" will reset another bank WITH watch dog enabled
+ "diswd" will disable watch dog after u-boot boots up successfully
-* Patch by Hans-Joerg Frieden, 06 Dec 2002
- Fix misc problems with AmigaOne support
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Patch by Chris Hallinan, 3 Dec 2002:
- minor cleanup to the MPC8245 EPIC driver
+commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue May 30 08:51:19 2006 -0500
-* Patch by Pierre Aubert , 28 Nov 2002
- Add support for external (SIU) interrupts on MPC8xx
+ Fix two SDRAM setup bugs.
-* Patch by Pierre Aubert , 28 Nov 2002
- Fix nested syscalls bug in standalone applications
+ Fix ECC setup bug.
+ Enable 1T/2T based on number of DIMMs present.
-* Patch by David Müller, 27 Nov 2002:
- fix output of "pciinfo" command for CardBus bridge devices.
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Fix bug in TQM8260 board detection - boards got stuck when board ID
- was not readable
+commit d11fec5015334deb2010e36ce00bb118cc5429a5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri May 26 10:24:48 2006 -0500
-* Add LED indication for IDE activity on KUP4K board
+ Add first draft of the MPC8641HPCN doc/README.
-* Fix startup problems with VFD display on TRAB
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Pierre Aubert, 20 Nov 2002
- Add driver for Epson SED13806 graphic controller.
- Add support for BMP logos in cfb_console driver.
+commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri May 26 10:13:04 2006 -0500
-* Added support for both PCMCIA slots (at the same time!) on MPC8xx
+ Added pci@8000 block.
+ Updated ethernet interrupt mappings (moved up 48).
+ Cleaned up a few comments.
-* Patch by Rod Boyce, 21 Nov 2002:
- fix PCMCIA on MBX8xx board
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Pierre Aubert , 21 Nov 2002
- Add CFG_CPM_POST_WORD_ADDR to make the offset of the
- bootmode word in DPRAM configurable
+commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri May 26 10:01:16 2006 -0500
-* Patch by Daniel Engström, 18 Nov 2002:
- Fixes for x86 port (mostly strings issues)
+ Allow args on reset command.
-* Patch by Ken Chou, 18 Nov 2002:
- Fix for natsemi NIC cards (DP83815)
+ Signed-off-by: Jon Loeliger <jdl@jdl.com>
-* Patch by Pierre Aubert, 19 Nov 2002:
- fix a bug for the MII configuration, and some warnings
+commit 14e37081ff3cac7ebe6e93836523429853b6b292
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:28:39 2006 -0500
-* Patch by Thomas Frieden, 13 Nov 2002:
- Add code for AmigaOne board
- (preliminary merge to U-Boot, still WIP)
+ Change arbitration to round-robin for SMP linux.
-* Patch by Jon Diekema, 12 Nov 2002:
- - Adding URL for IEEE OUI lookup
- - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
- being defined.
- - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
- root-on-nfs macros are designed to switch how the default boot
- method gets defined.
+commit 9a655876e5995be80f49054e2509500e871e4d3a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:26:34 2006 -0500
-* Patch by Daniel Engström, 13 Nov 2002:
- Add support for i386 architecture and AMD SC520 board
+ Enable dual DDR controllers and interleaving.
-* Patch by Pierre Aubert, 12 Nov 2002:
- Add support for DOS filesystem and booting from DOS floppy disk
+commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:22:44 2006 -0500
-* Patch by Jim Sandoz, 07 Nov 2002:
- Increase number of network RX buffers (PKTBUFSRX in
- "include/net.h") for EEPRO100 based boards (especially SP8240)
- which showed "Receiver is not ready" errors when U-Boot was
- processing the receive buffers slower than the network controller
- was filling them.
+ Update 86xx address map and LAWBARs.
-* Patch by Andreas Oberritter, 09 Nov 2002:
- Change behaviour of NetLoop(): return -1 for errors, filesize
- otherwise; return code 0 is valid an means no file loaded - in this
- case the environment still gets updated!
+commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 13:14:15 2006 -0500
-* Patches by Jon Diekema, 9 Nov 2002:
- - improve ADC/DAC clocking on the SACSng board to align
- the failing edges of LRCLK and SCLK
- - sbc8260 configuration tweaks
- - add status LED support for 82xx systems
- - wire sspi/sspo commands into command handler; improved error
- handlering
- - add timestamp support and alternate memory test to the
- SACSng configuration
+ Remove L2 Cache invalidate polling.
-* Patch by Vince Husovsky, 7 Nov 2002:
- Add "-n" to linker options to get rid of "Not enough room for
- program headers" problem
+commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Fri May 19 12:33:09 2006 -0500
-* Patch by David Müller, 05 Nov 2002
- Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
- so we can use an already existing name
+ Enable 2nd CPU and I2C.
-* Patch by Pierre Aubert, 05 Nov 2002
- Hardware relatied improvments in FDC boot code
+commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon May 15 07:26:56 2006 -0500
-* Patch by Holger Schurig, 5 Nov 2002:
- Make the PXA really change it's frequency
+ Update interrupt mapping.
-* Patch by Pierre Aubert, 05 Nov 2002
- Add support for slave serial Spartan 2 FPGAs
+commit 6cfea33477b04b63ed47386ed1629529484c33ba
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 10 09:38:06 2006 -0500
-* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
- drivers
+ Remove unneeded INIT_RAM_LOCK cache twiddling.
+ Correctly tracks r29 as global data pointer now.
-* Add support for log buffer which can be passed to Linux kernel's
- syslog mechanism; used especially for POST results.
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
-* Patch by Klaus Heydeck, 31 Oct 2002:
- Add initial support for kup4k board
+commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed May 10 09:33:07 2006 -0500
-* Patch by Robert Schwebel, 04 Nov 2002:
- - use watchdog to reset PXA250 systems
- - added progress callbacks to (some of the) ARM code
- - update for Cogent CSB226 board
+ Remove unnecessary flash.c file.
-* Add support for FPS860 board
+commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue May 9 08:23:49 2006 -0500
-* Patch by Guillaume Alexandre,, 04 Nov 2002:
- Improve PCI access on 32-bits Compact PCI bus
+ Get MPC8641HPCN flash images working.
-* Fix mdelay() on TRAB - this was still the debugging version with
- seconds instead of ms.
+ Enable the CFI driver.
+ Remove bogus LAWBAR7 cruft.
+ Use correct TEXT_BASE, Fixup load script.
+ Enable SPD EEPROM during DDR setup.
+ Use generic RFC 1918 IP addresses by default.
-* Patch by Robert Schwebel, 1 Nov 2002:
- XScale related cleanup (affects all ARM boards)
+commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Apr 27 10:15:16 2006 -0500
-* Cleanup of names and README.
+ Cleanup whitespaces and style issues.
+ Removed //-style comments.
+ Use 80-column lines.
+ Remove trailing whitespace.
+ Remove dead code and debug cruft.
-======================================================================
-Notes for U-Boot 0.1.0:
-======================================================================
+commit a2320a6bf8113a09544c42d160d10ac69d049a03
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Apr 27 08:22:39 2006 -0500
-This is the initial version of "Das U-Boot", the Universal Boot Loader.
+ Revert bad PCI prefetch limit change.
-It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
-For information about the history of the project please see the
-PPCBoot project page at http://sourceforge.net/projects/ppcboot
+commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 26 17:58:56 2006 -0500
-======================================================================
+ Initial support for MPC8641 HPCN board.