Changes for U-Boot 1.1.4:
======================================================================
+* Minor changes to init flags in TQM834x PCI.
+
+* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
+ Patch by Stefan Roese, 15 Nov 2005
+
+* New PPC 405EP board added: CMS700
+ Added CONFIG_NET_MULTI for VOM405 board.
+ Added reset_phy() for VOM405 board.
+ Patch by Matthias Fuchs, 09 Nov 2005
+
+* Updated PCI mapping for esd CPCI2DP board.
+ Add support for error LED.
+ Patch by Matthias Fuchs, 07 Nov 2005
+
+* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
+ Patch by Stefan Roese, 07 Nov 2005
+
+* Correct PPC Timebase register definitions (SPRN_TBRL...)
+ Patch by Stefan Roese, 07 Nov 2005
+
+* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
+ Patch by Stefan Roese, 05 Nov 2005
+
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+ Patch by Stefan Roese, 03 Nov 2005
+
+* Add support for Ocotea pass 3 with 440GX Rev. F
+ Patch by Stefan Roese, 01 Nov 2005
+
+* Fix external IRQ configuration on Yellowstone & Yosemite
+ Patch by Stefan Roese, 28 Oct 2005
+
* Add support for multiple PHYs.
+ Tested on the following boards:
+ cmcpu2 (at91rm9200/ether.c)
+ PPChameleon (ppc4xx/4xx_enet.c)
+ yukon (mpc8220/fec.c)
+ uc100 (mpc8xx/fec.c)
+ tqm834x (mpc834x/tsec.c) with EEPRO100
+ lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
+ Main changes include:
+ common/miiphyutil.c
+ - miiphy_register routine was added to allow multiple PHYs to be registered
+ - miiphy_read and miiphy_write are now defined in this file, and
+ require additional argument (char *devname)
+ - other miiphy_* routines also require additional device name argument
+ ../lib_i386/board.c
+ ../lib_ppc/board.c
+ Calling reset_phy() was moved to be executed *after* eth_initialize().
+ This is necessary as now some of the implementations of reset_phy()
+ may need to use miiphy_reset() which is not allowed before eth_initialize()
+ as eth_initialize registers all required miiphy_* routines.
+ Tested on IP860 and PHY initializes properly after this change.
* Correct includes for flat tree builder.
* Add PCI support for the TQM834x board.
+* Add missing 4xx board to MAKEALL
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix conflicting types (flash_write()) in esd auto_update.c
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix problem with sleep in NetConsole (use get_timer())
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Add NetConsole Support for AMCC eval boards
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
+ Patch by Stefan Roese, 18 Oct 2005
+
* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
Fix identation on ext2ls help entry.
Patch by Stefan Roese, 14 Oct 2005