======================================================================
-Changes since U-Boot 0.2.0:
+Changes since U-Boot 0.2.2:
+======================================================================
+
+* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
+ - fix SRAM and SDRAM memory sizing
+ - add status LED support
+ - add MAC address for second (SCC1) ethernet port
+
+* Update default environment for TQM8260 board
+
+* Patch by Rick Bronson, 16 Mar 2003:
+ - Add NAND flash support for reading, writing, and erasing NAND
+ flash (certain forms of which are called SmartMedia).
+ - Add support for Atmel AT91RM9200DK ARM920T based development kit.
+
+* Patches by Robert Schwebel, 19 Mar 2003:
+ - use arm-linux-gcc as default compiler for ARM
+ - fix i2c fixup code
+ - fix missing baudrate setting
+ - added $loadaddr / CFG_LOAD_ADDR support to loadb
+ - moved "ignoring trailing characters" _before_ u-boot wants to
+ print out diagnostics messages; removes bogus characters at the
+ end of transmission
+
+* Patch by John Zhan, 18 Mar 2003:
+ Add support for SinoVee Microsystems SC8xx boards
+
+* Patch by Rolf Offermanns, 21 Mar 2003:
+ ported the dnp1110 related changes from the current armboot cvs to
+ current u-boot cvs. smc91111 does not work. problem marked in
+ smc91111.c, grep for "FIXME".
+
+* Patch by Brian Auld, 25 Mar 2003:
+ Add support for STM flash chips on ebony board
+
+* Add PCI support for MPC8250 Boards (PM825 module)
+
+* Patch by Stefan Roese, 25 Mar 2003:
+ - PCI405 update.
+
+* Patch by Stefan Roese, 20 Mar 2003:
+ - CPCI4052 update (support for revision 3).
+ - Set edge conditioning circuitry on PPC405GPr for compatibility
+ to existing PPC405GP designs.
+ - Clip udiv to 5 bits on PPC405 (serial.c).
+
+* Extend INCAIP board support:
+ - add automatic RAM size detection
+ - add "bdinfo" command
+ - pass flash address and size to Linux kernel
+ - switch to 150 MHz clock
+
+* Avoid flicker on the TRAB's VFD by synchronizing the enable with
+ the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
+ boards, version 153 for Rev. 200 boards).
+
+* Patch by Vladimir Gurevich, 12 Mar 2003:
+ Fix relocation problem of statically initialized string pointers
+ in common/cmd_pci.c
+
+* Patch by Kai-Uwe Blöm, 12 Mar 2003:
+ Cleanup & bug fixes for JFFS2 code:
+ - the memory mangement was broken. It caused havoc on malloc by
+ writing beyond the block boundaries.
+ - the length calculation for files was wrong, sometimes resulting
+ in short file reads.
+ - data copying now optionally takes fragment version numbers into
+ account, to avoid copying from older data.
+ See doc/README.JFFS2 for details.
+
+* Patch by Josef Wagner, 12 Mar 2003:
+ - 16/32 MB and 50/80 MHz support with auto-detection for IP860
+ - ETH05 and BEDBUG support for CU824
+ - added support for MicroSys CPC45
+ - new BOOTROM/FLASH0 and DOC base for PM826
+
+* Patch by Robert Schwebel, 12 Mar 2003:
+ Fix the chpart command on innokom board
+
+* Name cleanup:
+ mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
+ s/PPCBoot/U-Boot/ in some files
+ s/pImage/uImage/ in some files
+
+* Patch by Detlev Zundel, 15 Jan 2003:
+ Fix '' command line quoting
+
+* Patch by The LEOX team, 19 Jan 2003:
+ - add support for the ELPT860 board
+ - add support for Dallas ds164x RTC
+
+* Patches by David Müller, 31 Jan 2003:
+ - minimal setup for CardBus bridges
+ - add EEPROM read/write support in the CS8900 driver
+ - add support for the builtin I2C controller in the Samsung s3c24x0 chips
+ - add support for MPL's VCMA9 (Samsung s3c2410 based) board
+
+* Patch by Steven Scholz, 04 Feb 2003:
+ add support for RTC DS1307
+
+* Patch by Reinhard Meyer, 5 Feb 2003:
+ fix PLPRCR/SCCR init sequence on 8xx to allow for
+ changes of EBDF by software
+
+* Patch by Vladimir Gurevich, 07 Feb 2003:
+ "API-compatibility patch" for 4xx I2C driver
+
+* TRAB fixes / extensions:
+ - Restore VFD brightness as saved in environment
+ - add support for FGujitsu flashes
+ - make sure both buzzers are turned off (drive low level)
+
+* Patches by Robert Schwebel, 06 Mar 2003:
+ - fix bug in BOOTP code (must use NetCopyIP)
+ - update of CSB226 port
+ - clear BSS segment on XScale
+ - added support for i2c_init_board() function
+ - update to the Innokom plattform
+
+* Extend support for redundand environments for configurations where
+ environment size < sector size
+
+* Patch by Rune Torgersen, 13 Feb 2003:
+ Add support for Motorola MPC8266ADS board
+
+* Patch by Kyle Harris, 19 Feb 2003:
+ patches for the Intel lubbock board:
+ memsetup.S - general cleanup (based on Robert's csb226 code)
+ flash.c - overhaul, actually works now
+ lubbock.c - fix init funcs to return proper value
+
+* Patch by Kenneth Johansson, 26 Feb 2003:
+ - Fixed off by one in RFTA calculation.
+ - No need to abort when LDF is lower than we can program it's only
+ minimum timing so clamp it to what we can do.
+ - Takes function pointer to function for reading the spd_nvram. Usefull
+ for faking data or hardcode a module without the nvram.
+ - fix other user for above change
+ - fix some comments.
+
+* Patches by Brian Waite, 26 Feb 2003:
+ - fix port for evb64260 board
+ - fix PCI for evb64260 board
+ - fix PCI scan
+
+* Patch by Reinhard Meyer, 1 Mar 2003:
+ Add support for EMK TOP860 Module
+
+* Patch by Yuli Barcohen, 02 Mar 2003:
+ Add SPD EEPROM support for MPC8260ADS board
+
+* Patch by Robert Schwebel, 21 Jan 2003:
+ - Add support for Innokom board
+ - Don't complain if "install" fails
+ - README cleanup (remove duplicated lines)
+ - Update PXA header files
+
+* Add documentation for existing POST code (doc/README.POST)
+
+* Patch by Laudney Ren, 15 Jan 2003:
+ Fix handling of redundand environment in "tools/envcrc.c"
+
+* Patch by Detlev Zundel, 28 Feb 2003:
+ Add bedbug support for 824x systems
+
+* Add support for 16 MB flash configuration of TRAB board
+
+* Patch by Erwin Rol, 27 Feb 2003:
+ Add support for RTEMS
+
+* Add image information to README
+
+* Patch by Stefan Roese, 18 Feb 2003:
+ CPCIISER4 configuration updated.
+
+* Patch by Stefan Roese, 17 Feb 2003:
+ Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
+
+* Patch by Stefan Roese, 13 Feb 2003:
+ Add "pcidelay" environment variable (in ms, enabled via
+ CONFIG_PCI_BOOTDELAY).
+ PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
+ RST# to respond to configuration cycles (33MHz -> 1s).
+
+* Fix dual PCMCIA slot support (when running with just one
+ slot populated)
+
+* Add VFD type detection to trab board
+
+* extend drivers/cs8900.c driver to synchronize ethaddr environment
+ variable with value in the EEPROM
+
+* Patch by Stefan Roese, 10 Feb 2003:
+ Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
+
+* Add support for MIPS32 4Kc CPUs
+
+* Add support for INCA-IP Board
+
+======================================================================
+Changes for U-Boot 0.2.2:
+======================================================================
+
+* Add dual ethernet support on PM826
+
+* Add support for LXT971 PHY on PM826
+
+* Patch by Tord Andersson, 16 Jan 2003:
+ Fix flash sector count for TQM8xxL
+
+* Fix I2C EEPROM problem on ICU862 board (would only write the first
+ 16 bytes out of each 32 byte block)
+
+======================================================================
+Changes for U-Boot 0.2.1:
======================================================================
* Add support for V37 board