Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Yuli Barcohen, 20 May 2004:
+ Add support for Interphase iSPAN boards.
+
+* Patches by Paul Ruhland, 17 May 2004:
+ - Add I/O functions to the smc91111 ethernet driver to support the
+ Logic LPD7A40x boards.
+ - Add support for the Logic Zoom LH7A40x based SDK board(s),
+ specifically the LPD7A400.
+
+* Patches by Robert Schwebel, 15 May 2004:
+ - call MAC address reading code also for SMSC91C111;
+ - make SMSC91C111 timeout configurable, remove duplicate code
+ - fix get_timer() for PXA
+ - update doc/README.JFFS2
+ - use "bootfile" env variable also for jffs2
+
+* Patch by Tolunay Orkun, 14 May 2004:
+ Add support for Cogent CSB472 board (8MB Flash Rev)
+
+* Patch by Thomas Viehweger, 14 May 2004:
+ - flash.h: more flash types added
+ - immap_8260.h: some bits added (useful for RMII)
+ - cmd_coninfo.c: typo corrected, printf -> puts
+ - reduced size by replacing spaces with tab
+
+* Patch by Robert Schwebel, 13 May 2004:
+ Add 'imgextract' command: extract one part of a multi file image.
+
+* Patches by Jon Loeliger, 11 May 2004:
+ Dynamically handle REV1 and REV2 MPC85xx parts.
+ (Jon Loeliger, 10-May-2004).
+ New consistent memory map and Local Access Window across MPC85xx line.
+ New CCSRBAR at 0xE000_0000 now.
+ Add RAPID I/O memory map.
+ New memory map in README.MPC85xxads
+ (Kumar Gala, 10-May-2004)
+ Better board and CPU identification on MPC85xx boards at boot.
+ (Jon Loeliger, 10-May-2004)
+ SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
+ Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
+ (Jim Robertson, 10-May-2004)
+ Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
+ Supports multiple PHYs.
+ (Andy Fleming, 10-May-2004)
+ Some README.MPC85xxads updates.
+ (Kumar Gala, 10-May-2004)
+ Copyright updates for "Freescale"
+ (Andy Fleming, 10-May-2004)
+
+* Patch by Stephen Williams, 11 May 2004:
+ Add flash support for ST M29W040B
+ Reduce JSE specific flash.c to remove dead code.
+
+* Patch by Markus Pietrek, 04 May 2004:
+ Fix clear_bss code for ARM systems (all except s3c44b0 which
+ doesn't clear BSS at all?)
+
+* Fix "ping" problem on INC-IP board. Strange problem:
+ Sometimes the store word instruction hangs while writing to one of
+ the Switch registers, but only if the next instruction is 16-byte
+ aligned. Moving the instruction into a separate function somehow
+ makes the problem go away.
+
+* Patch by Rishi Bhattacharya, 08 May 2004:
+ Add support for TI OMAP5912 OSK Board
+
+* Patch by Sam Song May, 07 May 2004:
+ Fix typo of UPM table for rmu board
+
+* Patch by Pantelis Antoniou, 05 May 2004:
+ - Intracom board update.
+ - Add Codec POST.
+
+* Add support for the second Ethernet interface for the 'PPChameleon'
+ board.
+
+* Patch by Dave Peverley, 30 Apr 2004:
+ Add support for OMAP730 Perseus2 Development board
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+ Fix flash chip-select (OR0) option register setting on FADS boards.
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+ Report MII network speed and duplex setting properly when
+ auto-negotiate is not enabled.
+
+* Patch by Jarrett Redd, 29 Apr 2004:
+ Fix hang on reset on Ocotea board due to flash in wrong mode.
+
+* Patch by Dave Peverley, 29 Apr 2004:
+ add MAC address detection to smc91111 driver
+
+* Patch by David Müller, 28 Apr 2004:
+ fix typo in lib_arm/board.c
+
* Patch by Tolunay Orkun, 20 Apr 2004:
- README update: add CONFIG_CSB272 and csb272_config
- add descriptions for some MII/PHY options, CONFIG_I2CFAST, and