+commit 17e900b8c0f38d922da47073246219dce2a847f2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 14:54:04 2008 +0200
+
+ MVBC_P: fix compile problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 52b047ae48219b59bebe37ba743ab103fd4f8316
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 12:10:11 2008 +0200
+
+ MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9c101c660b3d1995045c61c7c6041f52b6cf335
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 00:36:53 2008 +0200
+
+ ads5121: fix compiler warnings (unused variables)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 902ca09246039964d59bbcb519b1e1b5aed01308
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 11:29:28 2008 -0500
+
+ 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
+
+ Use CONFIG_NUM_CPUS to match existing define used by 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 09:20:53 2008 -0500
+
+ Fix fallout from autostart revert
+
+ The autostart revert caused a bit of duplicated code as well as
+ code that was using images->autostart that needs to get removed so
+ we can build again.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 09:16:25 2008 -0500
+
+ Fix compile error related to r8a66597-hcd & usb
+
+ When building the 8544DS board we get this error:
+
+ In file included from r8a66597-hcd.c:22:
+ u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
+ make[1]: *** [r8a66597-hcd.o] Error 1
+
+ The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
+ is set.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2d0daa03612338a813e3c9d22680e54eabfea378
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:02:26 2008 -0500
+
+ POWERPC 86xx: Move BAT setup code to C
+
+ This is needed because we will be possibly be locating
+ devices at physical addresses above 32bits, and the asm
+ preprocessing does not appear to deal with ULL constants
+ properly. We now call write_bat in lib_ppc/bat_rw.c.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9de67149db576c91b9c2a0a182652331e7e44211
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:01:53 2008 -0500
+
+ POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
+
+ Perform sync/isync as required by the architecture.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:01:16 2008 -0500
+
+ POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Aug 3 21:44:10 2008 +0200
+
+ i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
+
+ Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
+ contacts instead of only the first 256 ones as is the case prior to
+ this patch.
+
+ Add missing MUX_* macros and update board files to use the new macros.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Aug 3 21:43:37 2008 +0200
+
+ i.MX31: Fix IOMUX related typos
+
+ Correct the names of some IOMUX macros.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
+Author: Steve Sakoman <steve@sakoman.com>
+Date: Mon Aug 11 20:26:16 2008 +0200
+
+ OneNAND: Remove unused parameters to onenand_verify_page
+
+ The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 8 18:00:40 2008 +0200
+
+ video: fix bug in cfb_console code
+
+ FILL_15BIT_555RGB macro extension for pixel swapping
+ by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
+ introduced a bug in cfb_console:
+
+ Bitmaps with odd-numbered width won't be rendered
+ correctly and even U-Boot crashes are observed on
+ some platforms while repeated rendering of such
+ bitmaps with "bmp display". Also if a bitmap is
+ rendered to an odd-numbered x starting position,
+ the same problem occurs. This patch is an attempt
+ to fix it.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d9015f6a50d7258125349ef5c2af836458a0029a
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 8 18:00:39 2008 +0200
+
+ video: fix bug in logo_plot
+
+ If logo_plot() should ever be called with x starting
+ position other than zero and for pixel depths greater
+ than 8bpp, logo colors distortion will be observed.
+ This patch fixes the issue.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 406819ae94f79f5b59e01d163380ca7d83709251
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 11 00:17:52 2008 +0200
+
+ MAINTAINERS: sort entries
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Aug 7 18:19:28 2008 +0800
+
+ Add mpc7448hpc2 maintainer information
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Aug 7 13:13:27 2008 +0530
+
+ common/cmd_load.c - Minor code & Coding Style cleanup
+
+ - os_data_header Variable is a carry over feature
+ & unused. So removed all instance of this variable
+ - Minor Code Style Update
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Aug 6 19:32:33 2008 +0200
+
+ Update the U-Boot wiki URL.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
+Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
+Date: Sun Aug 10 17:56:36 2008 +0200
+
+ OneNAND: Remove base address offset usage
+
+ While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
+ using OneNAND and some using NAND, we found some differences in OneNAND and
+ NAND command address handling.
+
+ As this might confuse users (it already confused us), we like to align OneNAND
+ and NAND address handling.
+
+ The issue is that cmd_onenand.c subtracts the onenand base address from the
+ addresses you type into the u-boot command line so, unlike nand, you can't
+ use addresses relative to the start of the onenand part e.g. this won't work:
+
+ onenand read 82000000 280000 400000
+
+ you have to use:
+
+ onenand read 82000000 20280000 400000
+
+ Looking at recent git, the only board currently using OneNAND is Apollon, and
+ for this the OneNAND base address is 0 (apollon.h)
+
+ #define CFG_ONENAND_BASE 0x00000000
+
+ so patch below won't break any existing boards and will align OneNAND and NAND
+ handling on boards where OneNAND base address is != 0.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit c11528083ef6e55e76df742228c26e39d151813d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 7 09:28:20 2008 -0500
+
+ mpc85xx: workaround old binutils bug
+
+ The recent change to move the .bss outside of the image gives older
+ binutils (ld from eldk4.1/binutils-2.16) some headache:
+
+ ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
+ ppc_85xx-ld: final link failed: Bad value
+
+ We workaround it by being explicit about the program headers and not
+ assigning the .bss to a program header.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0bf202ec586d4466c900e987720fa635c594d689
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 10 01:26:26 2008 +0200
+
+ Revert "[new uImage] Add autostart flag to bootm_headers structure"
+
+ This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
+
+ The commit was based on a misunderstanding of the (documented)
+ meaning of the 'autostart' environment variable. It might cause
+ boards to hang if 'autostart' was used, with the potential to brick
+ them. Go back to the documented behaviour.
+
+ Conflicts:
+
+ common/cmd_bootm.c
+ common/image.c
+ include/image.h
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 9 23:17:32 2008 +0200
+
+ TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
+
+ - enable CFI driver where this was forgotten
+ - enable mtdparts support
+ - adjust default environment
+ etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41266c9b5a5f873df3ec891bb0907616958b5602
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 5 10:51:57 2008 -0500
+
+ FIT: Fix handling of images without ramdisks
+
+ boot_get_ramdisk() should not treat the case when a FIT image does
+ not contain a ramdisk as an error.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Michal Simek <monstr@monstr.eu>
+
+commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Sat Aug 9 01:39:09 2008 +0400
+
+ DataFlash: AT45DB021 fix and AT45DB081 support
+
+ Fix for page size of AT45DB021. Also adding bigger AT45DB081
+ which comes with some newer boards.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit ba9324451b662dd393afa53e5cc36fc5d3d10966
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Aug 8 16:30:23 2008 +0900
+
+ sh: Update sh7763rdp config
+
+ Add sh_eth support to sh7763rdp.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 21f971ec265f6042ec21636d55d06a6bc0751077
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 7 01:22:29 2008 +0200
+
+ TQM823L: re-enable logo support; update LCD_INFO text
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 8 16:41:56 2008 +0200
+
+ TQM8xxL: fix support for second flash bank
+
+ When switching the TQM8xxL modules to use the CFI flash driver,
+ support for the second flash bank was broken because the CFI driver
+ did not support dynamically sized banks. This gets fixed now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2a112b234d879f6390503a5f4e38246acce9d0b0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 8 16:39:54 2008 +0200
+
+ CFI: allow for dynamically determined flash sizes and addresses
+
+ The CFI driver allowed only for static initializers in the
+ CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
+ several flash banks contiguously if the bank sizes were not known in
+ advance, which kind of violates U-Boot's design philosophy.
+
+ (will be used for example by the TQM8xxL boards)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 7 23:26:35 2008 -0700
+
+ QE UEC: Fix compiler warnings
+
+ Moved static functions earlier in file so forward declarations are not needed.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d5d28fe4aad5f4535400647a5617c11039506467
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Mar 31 02:37:38 2008 -0700
+
+ QE UEC: Add MII Commands
+
+ Add MII commands to the UEC driver. Note that once a UEC device is selected,
+ any device on its MDIO bus can be addressed.
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jul 9 21:07:38 2008 +0900
+
+ usb: add support for R8A66597 usb controller
+
+ add support for Renesas R8A66597 usb controller.
+ This patch supports USB Host mode.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 1d10dcd041aaeae9fd7c821005692898a0303382
+Author: Hunter, Jon <jon-hunter@ti.com>
+Date: Sat Jul 26 18:59:16 2008 -0500
+
+ Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
+
+ Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
+
+ Signed-off-by: Jon Hunter <jon-hunter@ti.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eab1007334b93a6209f1ec33615e26ef5311ede7
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Wed Aug 6 15:42:52 2008 -0400
+
+ ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
+
+ The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
+ configuration to match the schematic, and also sets the SDR0_PFC1 register to
+ select the corresponding mode for the UARTs.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Tue Jul 15 12:13:38 2008 +0200
+
+ mpc5121: Move iopin features from board specific to common files.
+
+ And in the process eliminate some duplicate register defines.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+
+commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
+Author: John Rigby <jrigby@freescale.com>
+Date: Tue Aug 5 17:38:57 2008 -0600
+
+ mpc5121: squash some fdt fixup errors
+
+ On ADS5121 when booting linux the following errors are seen:
+ Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
+ Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
+ Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
+
+ This is caused by ft_cpu_setup trying to deal with
+ both old and new soc node naming. This patch
+ fixes this by being smarter about what to
+ fixup.
+
+ Also do soc node fixups by compatible instead of by path.
+ A new board config called OF_SOC_COMPAT defined
+ to be "fsl,mpc5121-immr" replaces the old
+ OF_SOC node path that was defined to be "soc@80000000".
+
+ Old device trees still work, but the compatiblity
+ is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+ which is on by default in include/configs/ads5121.h.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:30 2008 +0200
+
+ drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:32 2008 +0200
+
+ nios2/sysid: fix printf warning
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:33 2008 +0200
+
+ Fix remaining build issues with MPC8xx FADS boards.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:31 2008 +0200
+
+ nios2: fix phys_addr_t and phys_size_t support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:34 2008 +0200
+
+ mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Aug 1 09:48:29 2008 +0100
+
+ Fix bitmap display for atmel lcd controller
+
+ The current lcd_display_bitmap() function does not work properly
+ for the Atmel LCD controller.
+
+ 2 fixes need to be done:-
+
+ (a) when setting the colour map, use the lcd_setcolreg() function
+ as provided by the Atmel driver
+ (b) the data is never actually written to the lcd framebuffer !!
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2a433c66b1e2770349fe4911be23c375f053ebd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 1 08:40:34 2008 +0200
+
+ qemu_mips: update README to follow qemu update about default machine
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ac169d645f5f0e0b9a232563099209e92a355d8e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:53:21 2008 -0500
+
+ ColdFire: Fix compilation issue caused by a missing function
+
+ Implement usec2ticks() which is used by fsl_i2c.c in
+ lib_m68k/time.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:53:06 2008 -0500
+
+ Fix compilation error for TASREG
+
+ TASREG is ColdFire platform, the include ppc4xx.h in
+ board/esd/common/flash.c causes conflict.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:52:36 2008 -0500
+
+ Fix compilation error for MCF5275
+
+ Rename OBJ to COBJ in board/platform/Makefile
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5c40548f01218360a1f1395198c50ff45f3035b5
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:52:28 2008 -0500
+
+ Fix compile error caused by incorrect function return type
+
+ Rename int mii_init(void) to void mii_init(void) for idmr
+ ColdFire platform
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a58c78067c928976c082c758d3987e89ead5b191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 1 12:06:22 2008 +0200
+
+ Fix build issues with MPC8xx FADS boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:54:03 2008 +0200
+
+ Prepare v1.3.4-rc2: update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 16:09:00 2008 +0100
+
+ Add gzipped logo support
+
+ The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
+
+ If this option is set, additionally to standard BMP
+ images, gzipped BMP images can be displayed via the
+ splashscreen support or the bmp command.
+
+ However, the splashscreen function *only* supports standard BMP images.
+
+ This patch adds the documented gzip support.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 15:56:48 2008 +0100
+
+ Fix Atmel LCD controller endianess for AVR32 processors
+
+ The Atmel lcd controller is used on Atmel's AT91 (little endian) and
+ AVR32 (big endian) platforms.
+
+ As such, the controller can handle both big and little endian memory.
+
+ This patch fixes the driver for the AVR32 platform.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 31 15:56:01 2008 +0200
+
+ apollon: fix build out of tree
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2e752be39d3e398d4ab89ffa6634c397df298297
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jul 31 12:35:04 2008 +0200
+
+ Uncompressed images loaded to their start address shall set load_end too
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c37207d7f51e19c17f859966f314e27cc1231801
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 16 16:38:59 2008 +0200
+
+ Fix printf() format problems with configurable prompts
+
+ U-Boot allows for configurable prompt strings using the
+ CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
+ the assumption was that any such user defined problts would contain
+ exactly one "%d" format specifier. But some boards did not.
+
+ To allow for flexible boot prompts without adding too complex code we
+ now allow to specify the whole list of printf() arguments in the user
+ definition. This is powerful, but requires a responsible user who
+ really understands what he is doing, as he needs to know for exanple
+ which variables are available in the respective context.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 54754120637b6a7f4ff774fb199fc550bcfea1da
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:02:14 2008 +0200
+
+ TQM85xx: fix typo introduce by commit ffbb5cb9
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 15:27:01 2008 +0200
+
+ mvbc_p board: fix most build warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c4ec6db074051d2f6fc76a66411c60621b22bc02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 13:57:20 2008 +0200
+
+ E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
+
+ Avoid "integer constant is too large for 'long' type" warnings.
+ And simplify the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9196b44334c330cc13de2464c59181e4db71f549
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:21:19 2008 +0400
+
+ 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:20:32 2008 +0400
+
+ PPC: Add pci_clk in the global_data for CPM2 processors
+
+ This patch adds pci_clk field to the global_data structure for the
+ processors which have CPM2 module in case the CONFIG_PCI is defined.
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit f0ff885ca64655bee6540eb8a25eed90b1152686
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 14:13:30 2008 -0500
+
+ mpc85xx: Update linker scripts for Freescale boards
+
+ * Move to using absolute addressing always. Makes the scripts a bit more
+ portable and common
+ * Moved .bss after the end of the image. These allows us to have more
+ room in the resulting binary image for code and data.
+ * Removed .text object files that aren't really needed
+ * Make sure _end is 4-byte aligned as the .bss init code expects this.
+ (Its possible that the end of .bss isn't 4-byte aligned)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 08:01:15 2008 -0500
+
+ Fix compile warnings in dlmalloc
+
+ The origional code was using on odd reference to get to the first
+ real element in av_[]. The first two elements of the array are
+ not used for actual bins, but for house keeping. If we are more
+ explicit about how use the first few elements we can get rid of the
+ warnings:
+
+ dlmalloc.c: In function 'malloc_extend_top':
+ dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ ...
+
+ The logic of how this code came to be is:
+ bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
+
+ SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
+ bin_at(0) = &(av_[0])
+
+ Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 10:21:01 2008 +0200
+
+ ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 09:59:51 2008 +0200
+
+ cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
+
+ A recent patch used '#if (CONFIG_CMD_USB)' instead of
+ '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
+ common/bootm.c compile again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 22 08:01:43 2008 +0900
+
+ Remove unused I2C at apollon board
+
+ There are no I2C devices on this board.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 3c95960e526b3b026da20201db64526f46faf14b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 10:12:09 2008 +0200
+
+ at91rm9200dk, csb637: fix NAND related build problems
+
+ Tried fixing NAND support for the at91rm9200dk board; untested.
+ Disabled NAND support in the csb637 board config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 29 12:23:49 2008 -0500
+
+ fsl_i2c: Use timebase timer functions instead of get_timer()
+
+ The current implementation of get_timer() is only really useful after we
+ have relocated u-boot to memory. The i2c code is used before that as part
+ of the SPD DDR setup.
+
+ We actually have a bug when using the get_timer() code before relocation
+ because the .bss hasn't been setup and thus we could be reading/writing
+ a random location (probably in flash).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
+Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
+Date: Tue Jul 29 14:49:31 2008 +0200
+
+ Adder8xx: Fix CFG_MONITOR_LEN
+
+ Due to increased space usage, U-Boot can no longer be stored in three sectors.
+ The current U-Boot use just over three flash sectors (197k), and U-Boot will
+ become corrupt after saving environment variables. This patch adds another 64k
+ to CFG_MONITOR_LEN.
+
+ Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
+
+commit a4c59ad4a21140550ada6f97690d2527c4146ce5
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 29 08:47:57 2008 +0900
+
+ Add OneNAND IPL related files to gitignore
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8d87589e8e874df7120a3d9667f051bc33bac250
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:38:25 2008 +0200
+
+ API: Teach the storage layer about SATA and MMC options.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:48 2008 +0200
+
+ API: Dump contents of sector 0 in the demo application.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 13ca6305f2eba49c175f6370c35286141059c789
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:10 2008 +0200
+
+ API: Correct storage enumeration routine, other minor fixes in API storage area.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:36:19 2008 +0200
+
+ API: Fix compilation warnings in api_examples/demo.c.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit c14eefcc48212af2f3314809605698dd8393a90a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jul 27 17:09:43 2008 +0200
+
+ Fix more printf() format warnings
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 936897d4d1365452bbbdf8430db5e7769ef08d38
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jul 25 15:18:16 2008 +0200
+
+ Fix remaining CFG_CMD_ define, ifdef and comments
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5d1d00fb36005482e1803a00ddc46efa11d719af
+Author: Stefano Babic <sbabic@denx.de>
+Date: Fri Jul 25 08:57:40 2008 +0200
+
+ Add include for config.h in command.h.
+
+ Because the cmd_tbl_s structure depends on the configuration file, it
+ must be assured that config.h is included before the structure is
+ evaluated by the compiler. If this is not certain, it could happen
+ that the compiler generates structures of different size, depending
+ on the fact if the source file includes <config.h> before or after
+ <command.h>.
+
+ The effect is that u-boot crashes when tries to relocate the command
+ table (for ppc) or try to access to the command table for other
+ architectures.
+
+ The problem can happen on board-depending commands. All general
+ commands under /common are unaffected, because they include already
+ config.h before command.h.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jul 23 13:16:06 2008 -0500
+
+ NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
+
+ This fixes building out-of-tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Jul 23 07:30:46 2008 +0200
+
+ Fix warnings if compiling with IDE support.
+
+ cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
+ cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7610db17fd4d59c51d825488526d85ede2f06767
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Tue Jul 22 14:28:11 2008 -0400
+
+ Removed support for the adsvix board.
+
+ Support for the adsvix was originally provided by Applied Data
+ Systems (ADS), inc., now EuroTech, Inc.
+ The board never shipped aside from some sample boards.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit f96b44cef897bd372beb86dde1b33637c119d84d
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jul 22 16:22:11 2008 +0200
+
+ ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
+
+ If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
+ never set, because relocation to RAM is actually never done by U-boot
+ itself. However, several pieces of code check if this flag is set at
+ some time.
+
+ So, to make sure this flag is set on boards skipping relocation, this
+ is added to the initialisation of U-boot at a moment where it is safe
+ to do so.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Jul 21 14:26:23 2008 -0500
+
+ fsl-i2c: fix writes to data segment before relocation
+
+ Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
+ relocation. Commit d8c82db4 added the ability for i2c_init() to program the
+ I2C bus speed and save the value in i2c_bus_speed[], which is a global
+ variable. It is an error to write to the data segment before relocation,
+ which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Mon Jul 28 16:56:51 2008 +0200
+
+ mips: Fix baudrate divisor computation on alchemy cpus
+
+ Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
+ on alchemy cpus.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:46 2008 +0200
+
+ spi flash: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:31 2008 +0200
+
+ atmel_mci: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:15 2008 +0200
+
+ avr32: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:52:19 2008 +0200
+
+ avr32: asm/io.h needs asm/types.h
+
+ map_physmem() takes a phys_addr_t as parameter. This type is defined in
+ asm/types.h, so we need to include that file.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Jul 17 12:25:46 2008 +0200
+
+ microblaze: Fix printf() format issues
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Jul 17 07:27:51 2008 +0530
+
+ Remove unused code from lib_arm/bootm.c
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:45 2008 +0200
+
+ tqm85xx: Demystify 'DK: !!!' comment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit b2f44ba570f3a01113bbb745daf46f3858d22f53
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:44 2008 +0200
+
+ 83xx/85xx/86xx: Add LTEDR local bus definitions
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 16 16:22:32 2008 +0200
+
+ serial_xuartlite.c: fix compiler warnings
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 11:03:35 2008 +0200
+
+ POST: Add disable interrupts in some of the missing CPU POST tests
+
+ Some CPU POST tests did not disable the interrupts while running. This
+ seems to be necessary to protect this self modifying code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97a3bf268d096e0e97e54048448c35114edcf557
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:43:24 2008 +0200
+
+ ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
+
+ This is needed for boards that define CFG_64BIT_STRTOUL but don't define
+ CFG_64BIT_LBA.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0043ac55024963295fc79b39af85b6dc3b261e17
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Fri Jul 18 11:22:23 2008 +0200
+
+ POST PPC4xx/spr IVPR only if PPC440
+
+ The SPR IVPR register is only present (as far as I know) for
+ processors with a PPC440 core.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:42:29 2008 +0200
+
+ ppc4xx: Enable 64bit printf format on 440/460 platforms
+
+ This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
+ 440/460 platforms. This may be needed since those platforms support
+ 36bit physical address space.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 15:57:23 2008 +0200
+
+ ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
+
+ This patch fixes a problem with incorrect MODTx (On Die Termination)
+ setup for a configuration with multiple DIMM's and multiple ranks.
+ Without this change Katmai was unable to boot Linux with DDR2 frequency
+ >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
+ with DDR2 frequency = 640MHz and mem=4GB.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 340ccb260f21516be360745d5c5e3bd0657698df
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Wed Jul 16 20:04:49 2008 +0200
+
+ cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
+
+ This got broken by commits 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ That command needs to be in little endian format on BE machines
+ with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
+ gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
+ the cmdbuf in case portwidth = chipwidth = 8bit.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 699f05125509249072a0b865c8d35520d97cd501
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 15 22:22:44 2008 +0200
+
+ Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit bcab74baa6b1b1c969038ab6f64a186239180405
Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Date: Tue Jul 15 11:23:02 2008 -0400
Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
+Author: Christian Eggers <ceggers@gmx.de>
+Date: Wed May 21 21:29:10 2008 +0200
+
+ Fix endianess conversion in usb_ohci.c
+
+ Sorry, I forgot this line:
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+
+ I think this must be swapped (result may be equal).
+
commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
Author: Christian Eggers <ceggers@gmx.de>
Date: Wed May 21 22:12:00 2008 +0200
projects / platform / kernel / u-boot.git / blobdiff