======================================================================
-Changes since U-Boot 1.1.1:
+Changes for U-Boot 1.1.3:
======================================================================
+* Add support for AMCC Bamboo PPC440EP eval board
+ Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+ Fix style issues primarily in 85xx and 83xx boards.
+ - C++ comments
+ - Trailing white space
+ - Indentation not by TAB
+ - Excessive amount of empty lines
+ - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+ Add Xianghua Xiao and Lunsheng Wang's support for the
+ GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+ Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+ Move the TSEC driver out of cpu/mpc85xx as it will be shared
+ by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+ Implemented support for MPC8548CDS board.
+ Added DDR II support based on SPD values for MPC85xx boards.
+ This roll-up patch also includes bugfies for the previously
+ published patches:
+ DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+ Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+ For MPC85xxCDS:
+ Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+ for faster flash parts.
+ Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+ Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+ - Convert the CPM2 based functionality to use new CONFIG_CPM2
+ option rather than a myriad of CONFIG_MPC8560-like variants.
+ Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+ Eliminates the CONFIG_MPC8560 option entirely. Distributes the
+ new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+ Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+ Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+ (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+ routed to the Watchdog handler
+ Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+ Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+ Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+ loopback test code
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+ - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+ (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+ for details.
+ - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+ to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+ - Add support for AMCC PPC440EP/GR.
+ - Add support for AMCC Yosemite PPC440EP eval board.
+ - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+ - fix alignment of NAND size
+ - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+ The code is provided for, and was tested on, the Yukon/Alaska
+ and PM520 boards only.
+
+ A bug in flash_real_protect() for the Yukon board was fixed by
+ adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+ This fixes a problem of displaying bogus voltages when the voltages
+ are so low that the I2C devices start failing while the rest of the
+ system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+ Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+ Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+ "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+ U-Boot will automaticially find the end of the corresponding sector.
+
+* Patch by Stefan Roese, 5 Jul 2005:
+ Update uc100 board PHY setup
+
+* Patch by Stefan Roese, 1 Jul 2005:
+ Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+ Fix PHY addresses for PPChameleon and CATcenter boards
+ Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+ Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+ Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+ HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+ Initialize allocated dev and private hw structures
+ after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+ Fix byteorder problems with second argument of "bootm" with
+ standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+ Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+ (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+ those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+ - add support for the KS8695P (ARM 922 based) CPU
+ - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+ Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+ Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+ make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+ genereated HRESET pulse is too short to reset the external
+ circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+ (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+ size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+ March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+ added to support LZO and LZARI compression modes (undefined by
+ default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+ sections on PPChameleon board; other boards might use this, too.
+
+* Patch by Stefan Roese, 03 May 2005:
+ Update for P3G4
+ Fix problems in cmd_universe.c
+
+* Patch by Matthias Fuchs, 03 May 2005:
+ Added missing variable declaration in cmd_nand.c
+ Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+
+* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+
+* Fix bug in the SDRAM initialization code for canmb, IceCube and
+ PM520 boards.
+ Fix PHY address for canmb board.
+
+* Cleanup serial console baudrate calculation on AT91RM9200;
+ get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+
+* Patch by Matthias Fuchs, 18 Apr 2005:
+ Make PCI target address spaces on PMC405 and CPCI405 boards
+ configurable via environment variables
+
+* Auto-size RAM on canmb board.
+
+* Add support for canmb board
+
+* Patch by Stefan Roese, 13 Apr 2005:
+ Update for esd apc405
+
+* Fixes for TQM8560 board:
+ - fix clock rates
+ - remove debug messages
+ - fix flash sector protection
+
+* Patch by Steven Scholz, 07 Apr 2005:
+ Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+
+* Patches by Steven Scholz, 07 Apr 2005:
+ Fix compiler warning in altera.c
+ Fix warning in cpu/arm920t/at91rm9200/i2c.c
+
+* Patch by Ladislav Michl, 06 Apr 2005:
+ Fix voiceblue configuration.
+
+* Patch by Stefan Roese, 06 Apr 2005:
+ Updates for OCOTEA board:
+ - Changed U-Boot size from 512kByte to 256kByte
+ - Fixed flash driver to support boot from soldered user flash
+ - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+ - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+ Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+ - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+ - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+ - update the pxa-regs.h file for PXA27x chips
+ - add PXA27x based ADSVIX board
+ - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+ Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+ Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+ subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+ (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+ Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+ Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+ - introduce two new configuration options instead:
+ CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+ reset timers so it's save to use udelay() in timeout code.
+
+* Patch by Mathias Küster, 23 Nov 2004:
+ add udelay support for the mcf5282 cpu
+
+* Patch by Tolunay Orkun, 16 November 2004:
+ fix incorrect onboard Xilinx CPLD base address
+
+* Patch by Jerry Van Baren, 08 Nov 2004:
+ - Add low-boot option for MPC8260ADS board (if lowboot is selected,
+ the jumper for the HRCW source should select flash. If lowboot is
+ not selected, the jumper for the HRCW source should select the
+ BCSR.
+ - change default load base address to 0x00400000
+
+* Patch by Yuli Barcohen, 08 Nov 2004:
+ Add support for Analogue & Micro Rattler boards.
+ Tested on Rattler8248.
+
+* Patch by Andre Renaud, 08 Nov 2004:
+ Fix watchdog support in common/lcd.c
+
+* Patch by Marc Leeman, 05 Nov 2003:
+ Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
+ bug only affects the XPC8245 processors
+
+* Patches by Josef Wagner, 29 Oct 2004:
+ - Add support for MicroSys CPU87 board
+ - Add support for MicroSys PM854 board
+
+* Patch by Jian Zhang, 02 Nov 2004:
+ Add 16-bit NAND support
+
+* Patch by Scott McNutt, 01 Nov 2004:
+ Add missing NIOS/NIOS2 support for "iminfo" command
+
+* Patch by Detlev Zundel, 29 Oct 2004:
+ Add missing NIOS/NIOS2 support for "mkimage" tool.
+
+* Patch by David Adair, 27 Oct 2004:
+ Add missing 440GX SDRAM Controller reset
+
+* Patch by Steven Scholz, 25 Oct 2004:
+ Declare reset_cpu() in include/common.h instead locally
+
+* Patch by Yusdi Santoso, 22 Oct 2004:
+ - Add support for HIDDEN_DRAGON board
+ - fix endianess problem in driver/rtl1839.c
+
+* Patch by Allen Curtis, 21 Oct 2004:
+ support multiple serial ports
+
+* Patch by Richard Klingler, 03 Apr 2005:
+ Add call to eth_halt() in net/net.c when called functions fail
+ after eth_init() has been called.
+
+* Patch by Sam Song, 3 April 2005:
+ - Update README.Netconsole
+ - Update README
+
+* Prepare for SoC rework of ARM code:
+ - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
+ - rename memsetup into lowlevel_init (function name and source files)
+ Patch by Steven Scholz, 03 Apr 2005:
+ - create SoC specific directories include/asm-arm/arch-imx and
+ include/asm-arm/arch-s3c24x0
+
+* Fix problems with SNTP support;
+ enable SNTP support in some boards.
+
+* Patches by Martin Krause, 01 Apr 2005:
+ - Fix flash erase timeout on CMC_PU2
+ - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+
+* Patch by Steven Scholz, 13 March 2005:
+ fix cache enabling for AT91RM9200
+
+* Patch by Masami Komiya, 30 Mar 2005:
+ add SNTP support and expand time server and time offset fields of
+ DHCP support. See doc/README.SNTP
+
+* Patch by Steven Scholz, 13 Dec 2004:
+ Fix bug in at91rm920 ethernet driver
+
+* Patch by Steven Scholz, 13 Dec 2004:
+ Remove duplicated code by merging memsetup.S files for
+ at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+
+* Patch by Detlev Zundel, 31 Mar 2005:
+ Cleanup duplicate definition of overwrite_console()
+
+* Update TQM5200 configuration;
+ prepare for Rev. 200 starter kit boards
+
+* Patch by Scott McNutt, 21 Oct 2004:
+ Add support for Nios-II EPCS Controller core.
+
+* Patch by Scott McNutt, 20 Oct 2004:
+ Nios-II cleanups:
+ - Add sysid command (Nios-II only).
+ - Locate default exception trampoline at proper offset.
+ - Implement I/O routines (readb, writeb, etc)
+ - Implement do_bootm_linux
+
+* Patches by Martin Krause, 22 Mar 2005:
+ - use TQM5200_auto as MAKEALL target for TQM5200 systems
+ - add support for SM501 graphics controller
+ - add support for graphic console on TQM5200
+ - add support for TQM5200 Rev 200
+ - cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Manfred Baral, 17 Mar 2005:
+ Fix typo
+
+* Fix RTC configuration for PPChameleon board
+
+* Cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Stefan Roese, 16 Mar 2005:
+ Update for esd auto_update and hh405 board
+
+* Adapt for U-Boot image size (new features enabled) on TQM5200
+
+* Update code for TQM8540 board (and 85xx in general):
+ - Change the name of the Ethernet driver: MOTO ENET -> ENET
+ - Reformat boot messages
+ - Enable redundant environment
+ - Replace the -O2 optimization flag with -mno-string
+
+* Patch by David Brownell, 10 Mar 2005:
+ Restore copyright statements in OHCI drivers.
+
+* Add support for TQM8540 board
+
+* Patch by Detlev Zundel, 14 Mar 2005:
+ NC650: changed NAND flash addressing to using UPMB
+
+* Patch by Stefan Roese, 14 Mar 2005:
+ Update for esd voh405 fpga image
+
+* INKA4x0: Allow initialization of LCD backlight dimming from
+ "brightness" environment variable.
+
+* Add port initialization for digital I/O on INKA4x0
+
+* Patch by Stefan Roese, 01 Mar 2005:
+ Update for esd boards dp405 and hub405
+
+* Fix get_partition_info() parameter error in all other calls
+ (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+
+* Enable USB and IDE support for INKA4x0 board
+
+* Patch by Andrew Dyer, 28 Feb 2005:
+ fix ext2load passing an incorrect pointer to get_partition_info()
+ resulting in load failure for devices other than 0
+
+* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+
+* Cleanup USB and partition defines
+
+* Add support for ext2 filesystems and image timestamps to TQM5200 board
+
+* Add reset code for Coral-P on INKA4x0 board
+
+* Patch by Martin Krause, 28 Jun 2004:
+ Update for TRAB board.
+
+* Fix some missing "volatile"s in MPC5xxx FEC driver
+
+* Fix cirrus voltage detection (for CPC45)
+
+* Fix byteorder problem in usbboot and scsiboot commands.
+
+* Patch by Cajus Hahn, 04 Feb 2005:
+ - don't insist on leading '/' for filename in ext2load
+ - set default partition to useful value (1) in ext2load
+
+* Patch by Andrew Dyer, 08 Jan 2005:
+ fix wrong return codes in ext2 code
+
+* Removed '--no-warn-mismatch' option from Makefile. This option
+ makes 'ld' to overlook binary objects compatibility.
+
+* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
+ --end-group) outside of the group. This will make 'ld' to do
+ _multiple_ search in the library group when resolving symbol
+ references and do only a _single_ seach in libgcc.a after the group
+ search.
+
+* Fix stability problems on CPC45 board again.
+
+* Make image detection for diskboot / usbboot / scsiboot more robust
+ (also check header checksum)
+
+* Update CPC45 board configuration.
+
+* Add USB and PCI support for INKA4x0 board
+
+* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
+
+* Code cleanup
+
+* Patch by Robin Getz, 13 Oct 2004:
+ Add standalone application to change SMC91C111 MAC addresses,
+ see examples/README.smc91111_eeprom
+
+* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
+ Fix Flash support for ARM Integrator CP.
+
+* Patch by Richard Woodruff, 10 Jan 2005:
+ Update support for OMAP2420 (ARM11) and H4 board:
+ o clean up and add new types to H4 memory probe code.
+ o fix to work with internal boot.
+ o added PRCM config III operation.
+ o fix marginal flash timings.
+ o add revison ATAG usage.
+ o enable voltage scaling at power chip.
+ o fix compile error for i2c.
+
+* Fix network problem (error when receiving multiple ARP packets)
+
+* Patch by Daniel Poirot, 12 Oct 2004:
+ Add support for Wind River sbc405 board
+
+* Patch by Rainer Brestan, 12 Oct 2004:
+ Make examples/Makefile more robust
+
+* Patch by Sam Song, 11 October 2004:
+ - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
+ - Adjust CPU:BUS frequency ratio 1:1 when core frequency
+ less than 50MHz
+
+* Patch by Sam Song, 10 Oct 2004:
+ Fix a parameter error in run_command() in main.c
+
+* Patch by Richard Woodruff, 01 Oct 2004:
+ add support for the TI OMAP2420 processor and its H4 reference
+ board
+
+* Patch by Christian Pellegrin, 24 Sep 2004:
+ Added support for NE2000 compatible (DP8390, DP83902) NICs.
+
+* Patch by Leif Lindholm, 23 Sep 2004:
+ add support for the AMD db1550 board
+
+* Patch by Travis Sawyer, 15 Sep 2004:
+ Add CONFIG_SERIAL_MULTI support for ppc4xx,
+ update README.serial_multi
+
+* Patches by David Snowdon, 07 Sep 2004:
+ - add u-boot.hex target in the top level Makefile
+ - add support for the UNSW/NICTA PLEB 2 board (pleb2)
+ - use -mtune=xscale and -march=armv5 options for PXA
+
+* Patch by Florian Schlote, 08 Sep 2004:
+ Add support for SenTec-COBRA5272-board (Coldfire).
+
+* Patch by Gleb Natapov, 07 Sep 2004:
+ mpc824x: set PCI latency timer to a sane value
+ (is 0 after reset).
+
+* Patch by Kurt Stremerch, 03 Sep 2004:
+ Add bitstream configuration option for fpga command (Xilinx only).
+
+* Patch by Kurt Stremerch, 03 Sep 2004:
+ Add Xilinx Spartan2E family FPGA support
+
+* Patch by Jeff Angielski, 02 Sep 2004:
+ Add Added support for H2 revision of the EP8260 board.
+ Fixed formatting for some of the EP8260 related source files.
+
+* Patch by Jon Loeliger, 02 Sep 2004:
+ Reset monitor size back to 256 so environment can be written
+ to flash on MPC85xx ADS and CDS releases.
+
+* Patch by Paolo Broggini, 02 Sep 2004:
+ Make BSS clearing on ARM systems more robust
+
+* Patch by Yue Hu and Joe, 01 Sep 2004:
+ - add PCI support for ixp425;
+ - add EEPRO100 suppor tfor ixdp425 board.
+
+* Fix problem with protected sector detection in driver/cfi_flash.c
+
+======================================================================
+Changes for U-Boot 1.1.2:
+======================================================================
+
+* Code cleanup, mostly for GCC-3.3.x
+
+* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
+ pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
+ additional ethernet addresses.
+
+* Cleanup drivers/i82365.c - avoid duplication of code
+
+* Fix bogus "cannot span across banks" flash error message
+
+* Code cleanup
+
+* Add support for CompactFlash for the CPC45 Board.
+
+* Fix problems with CMC_PU2 flash driver.
+
+* Cleanup:
+ - avoid trigraph warning in fs/ext2/ext2fs.c
+ - rename UC100 -> uc100
+
+* Add support for UC100 board
+
+* Patch by Stefan Roese, 16 Dez 2004:
+ - ext2fs support added
+ - Tundra universe support added
+ - Coldfire MCF5249 support added (no preloader needed!)
+ - MCF5249 board TASREG added
+ - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
+ VOM405, WUH405
+ - some esd boards updated
+ - memory commands "mdc" and "mwc" added for cyclic read/write
+ (CONFIG_MX_CYCLIC, see README for further description)
+
+* Add support for INKA4X0 board
+
+* Patch by Steven Scholz, 12 Dec 2004:
+ Fix typo in AT91 memory setup.
+
+* Patch by Martin Krause, 27 Oct 2004:
+ - add support for "STK52xx" board (including PS/2 multiplexer)
+ - add hardware detection for TQM5200
+
+* Clean up CMC PU2 flash driver
+
+* Update MAINTAINERS file
+
+* Fix bug in MPC823 LCD driver
+
+* Fix udelay() on AT91RM9200 for delays < 1 ms.
+
+* Enable long help on CMC PU2 board;
+ fix reset issue;
+ increase CPU speed from 179 to 207 MHz.
+
+* Fix smc91111 ethernet driver for Xaeniax board (need to handle
+ unaligned tail part specially).
+
+* Update for AT91RM9200DK and CMC_PU2 boards:
+ - Enable booting directly from flash
+ - fix CMC_PU2 flash driver
+
+* Fix mkimage usage message
+
+* Map SRAM on NC650 board
+
+* Work around for Ethernet problems on Xaeniax board
+
+* Patch by TsiChung Liew, 23 Sep 2004:
+ - add support for MPC8220 CPU
+ - Add support for Alaska and Yukon boards
+
+* Fix configuration for ERIC board (needs more room)
+
+* Adjust MIPS compiler options at run-time depending on tools version
+ ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
+ "-mcpu=4kc" for old tools)
+
* Add passing of the command line and memory size information to the
kernel on xaeniax board.