+commit f7a35a60cf45491871a5c28e9ad24db005487857
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c2537ee85954af9d036b18b644f3e18d837bf4a5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
+Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
+Date: Thu Oct 16 13:38:00 2008 -0500
+
+ 83xx NAND boot: wait for LTESR[CC]
+
+ At least some revisions of the 8313, and possibly other chips, do not
+ wait for all pages of the initial 4K NAND region to be loaded before
+ beginning execution; thus, we wait for it before branching out of the
+ first NAND page.
+
+ This fixes warm reset problems when booting from NAND on 8313erdb.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf29e0ea0af03d593c64614136acc723a7a022a2
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Oct 17 12:54:18 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:50 2008 -0500
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
+ bit 26, instead it should be bit 28. This caused in incorrect
+ interpretation of the i2c_clk which is the same as the SEC clk on
+ MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
+ in PORDEVSR2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:49 2008 -0500
+
+ Revert "85xx: Using proper I2C source clock divider for MPC8544"
+
+ This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
+
+ The fix introduced by this patch is not correct. The problem is
+ that the documentation is not correct for the MPC8544 with regards
+ to which bit in PORDEVSR2 is for the SEC_CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2179c4766bffeece98e5e92040629a96c97e230c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 15 10:19:41 2008 -0500
+
+ 85xx: Fix compile warning
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:614: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Oct 15 10:40:24 2008 +0800
+
+ Fix the function conflict in x86emu when DEBUG is on
+
+ The function parse_line() in common/main.c was exposed globally by commit
+ 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
+ name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
+ This patch fix this by renaming the function in the debug.c file.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4dbacf69a669a17487054552fc2761149dd6767
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 15 15:50:45 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 374b9038293d01d8744a46af9b7854a6fd99b228
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:51:19 2008 +0200
+
+ Fix compiler warning in lib_ppc/board.c
+
+ Fix compiler warning introduced by commit 0f8cbc18
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9724555755a6f1066636481b41f7094e0ce93a69
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 9 10:29:14 2008 +0530
+
+ mpc83xx: wait till UPM completes the write to array
+
+ Reference manual states that MxMR[MAD] increment is the indication
+ of write to UPM array is complete. Honour that. Also, make the dummy
+ write explicit.
+
+ also fix the comment.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Wed Oct 8 18:12:20 2008 -0500
+
+ Remove unwanted ';' at end of define.
+
+ Currently this is not creating any problem. But it will result
+ in compilation error when used as below.
+
+ printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+
+ continuation of the theme based on git grep "^#define CFG_.*;$" include/
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b2934a56650e9a6c54432f9ce6dc36757967385e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Mon Oct 6 10:53:59 2008 -0400
+
+ ARM DaVinci: Add maintainer information for SFFSDR board.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sat Oct 4 19:26:16 2008 +0200
+
+ api: fix type mismatch
+
+ This patch fixes a type mismatch and thus removes a compiler
+ warning when compiling with CONFIG_API on powerpc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 1 12:25:04 2008 -0500
+
+ cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
+
+ Original code displayed:
+ => help i2c
+ i2c i2c speed [speed] - show or set I2C bus speed
+ i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 14 22:13:41 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 10 11:41:01 2008 +0800
+
+ Do not init SATA when disabled on 8536DS.
+
+ SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
+ driver still try to access the SATA registers, the cpu will hangup.
+ This patch try to fix this by reading the serdes status before the SATA
+ initialize.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
+Author: Nikita V. Youshchenko <yoush@cs.msu.su>
+Date: Fri Oct 3 00:03:55 2008 +0400
+
+ fsl_diu: fix alignment error that caused malloc corruption
+
+ When aligning malloc()ed screen_base, invalid offset was added.
+ This not only caused misaligned result (which did not cause hardware
+ misbehaviour), but - worse - caused screen_base + smem_len to
+ be out of malloc()ed space, which in turn caused breakage of
+ futher malloc()/free() operation.
+
+ This patch fixes screen_base alignment.
+
+ Also this patch makes memset() that cleans framebuffer to be executed
+ on first initialization of diu, not only on re-initialization. It looks
+ correct to clean the framebuffer instead of displaying random garbage;
+ I believe that was disabled only because that memset caused breakage
+ of malloc/free described above - which no longer happens with the fix
+ described above.
+
+ Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
+
+commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 24 10:29:37 2008 +0200
+
+ api: Fix building with CONFIG_API
+
+ This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
+
+ USB_MAX_STOR_DEV is defined in include/usb.h, but
+ needed in api/api_storage.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:39:40 2008 -0500
+
+ Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 81e612014c40c922ec35488d17c504d4e9286f06
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:38:42 2008 -0500
+
+ Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
+
+ The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
+ CFG_EEPROM_PAGE_WRITE_BITS in various temperature
+ sensor drivers are not necessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:04:38 2008 -0400
+
+ cmd_spi: remove broken signed casting for display
+
+ Since we're working with unsigned data, you can't apply a signed pointer
+ cast and then attempt to print the result. Otherwise you get wrong output
+ when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:05:24 2008 -0400
+
+ strings cmd: drop old CONFIG_CFG_STRINGS define
+
+ We don't need CONFIG_CFG_STRINGS anymore now that we have the define
+ CONFIG_CMD_STRINGS and Makefile control.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fecb5ade3b37f62981f2b05b621005850173aaa9
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Sep 19 17:32:49 2008 +0800
+
+ Fix the NAND size overflow issue.
+
+ When the total size of all NAND devices exceeds 4 GiB, the size will
+ overflow. This patch tries to fix this.
+
+ Note that we still have a problem when a single NAND device is bigger
+ than 4 GiB: then the overflow would actually happen earlier, i. e.
+ when storing the size in nand_info[].size, as nand_info[].size is an
+ "u_int32_t".
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f574717277238b9014b8136c90eea77196490f
+Author: Louis Su <louis@asix.com.tw>
+Date: Wed Jul 9 11:01:37 2008 +0800
+
+ AX88180: new gigabit network driver
+
+ Signed-off-by: Louis Su <louis@asix.com.tw>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Aug 19 16:07:03 2008 +0200
+
+ enable 10/100M at VSC8601 at tsec driver
+
+ Currently VSC8601 doesn't link with 10/100M partners if the
+ EEPROM/Strapping is not set up.
+ Setting the auto-neg register fixes this.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 702c85b0e876d587c11acdbb55738ee52acd54f4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Sep 30 15:02:53 2008 +0900
+
+ net: ne2000: Divided a function of NE2000 driver
+
+ get_prom function was used __attriute__ , but it is not enable.
+ ax88796.o does not do link besides ne2000.o. When ld is carried
+ out, get_prom function of ax88796.c is ignored.
+ This problem is a thing by specifications of ld.
+ I checked and test this patch on SuperH and MIPS.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Oct 14 11:10:59 2008 +0900
+
+ sh: rsk7203: Add smc911x driver support to board config file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit cae6f909baf86357b3c0bd01acfc414348c4d175
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Oct 9 13:54:33 2008 +0900
+
+ sh: Fix cannot execute a stand-alone application
+
+ Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:00 2008 -0500
+
+ fsl_pci_init do not scan bus when configured as an end-point
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Sep 16 17:07:53 2008 -0400
+
+ ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
+
+ This is no longer necessary now that the GD_FLG_RELOC flag is set for
+ all ARM boards.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit d977a57356657ba241256231efca32828a5822f9
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Sep 13 10:04:32 2008 +0200
+
+ Fix lzma uncompress call (image_start wrongly used instead image_len)
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:15 2008 -0700
+
+ mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:05:34 2008 -0500
+
+ 86xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ Not know how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d01f66d235118515b5086b88f82498bc0695d6a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:26:36 2008 -0500
+
+ CFI: cfi_flash write fix for AMD legacy
+
+ The flash_unlock_seq requires a sector for AMD_LEGACY.
+ Fix a retcode check typeo.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 542b385a620a1783454a00424930e51895f45073
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:10 2008 +0200
+
+ ppc4xx: Fix USB 2.0 phy reset sequence
+
+ This patch fixes USB 2.0 communication issues on some DU440 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8c1ce11114c2260dedb5547281945f7db8fa5c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:09 2008 +0200
+
+ ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:08 2008 +0200
+
+ ppc4xx: Fix DU440 GPIO configuration
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35dd025c70fcc4389317db2f2a9d14795172137d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:07 2008 +0200
+
+ ppc4xx: Update DU440 config
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3bf9273939ffe1a60a32a2eef909097f15df56b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 8 15:36:39 2008 -0500
+
+ MPC8572DS: Fix compile warnings
+
+ Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
+ compile warnings:
+
+ cmd_i2c.c:112: warning: missing braces around initializer
+ cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dffd2446fb041f38ef034b0fcf41e51e5e489159
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Tue Sep 30 10:55:57 2008 +0200
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ Measurements with our MPC8544 board showed that the I2C bus frequency
+ is wrong by a factor of 1.5. Obviously, the interpretation of the
+ MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
+ correct. There seems to be an error in the 8544 RM.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
+Author: Rafal Czubak <rcz@semihalf.com>
+Date: Wed Oct 8 13:41:30 2008 +0200
+
+ FSL: Fix get_cpu_board_revision() return value.
+
+ get_cpu_board_revision() returned board revision based on information stored
+ in global static struct eeprom. It should instead use one from local struct
+ board_eeprom, to which the data is actually read from EEPROM. The bug led to
+ system hang after printing L1 cache information on U-Boot startup. The problem
+ was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
+ boards using CFG_I2C_EEPROM_CCID.
+
+ The change has been successfully tested on MPC8555CDS system.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 747f316cca484ed627a97dd3391febabce384186
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:49 2008 +0200
+
+ update uImage FIT multi documentation
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:36 2008 +0200
+
+ move README.imx31 to doc/ and merge with README.mx31
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 25 20:54:37 2008 +0200
+
+ i.MX31: switch to CFG_HZ=1000
+
+ Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
+ cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
+ provides 2% or 0.4% precision depending on the
+ CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
+ boot-delay.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
+Author: gnusercn <gnusercn@gmail.com>
+Date: Wed Oct 8 18:58:58 2008 +0200
+
+ Fix bug: in arch-arm, env_get_char dose not work fine
+
+ due to the arm implementation which supposed that U-Boot is in RAM
+ when we jump to start_armboot
+
+ Signed-off-by: gnusercn <gnusercn@gmail.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
+Author: Adam Graham <agraham@amcc.com>
+Date: Mon Oct 6 10:16:13 2008 -0700
+
+ ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
+
+ After changing SDRAM_CLKTR phase value rerun the memory preload
+ initialization sequence (INITPLR) to reset and relock the memory
+ DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
+ adjustment effects the phase relationship of the internal, to the
+ PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:48:03 2008 -0400
+
+ Remove redundant #define for MPC8536DS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 445a7b38308eb05b41de74165b20855db58c7ee5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:47:30 2008 -0400
+
+ Add ID EEPROM support for MPC8572DS
+
+ The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
+ system information like mac addresses etc. This patch enables it.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:46:59 2008 -0400
+
+ Minor fixes for I2C address on MPC8572DS
+
+ MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
+ according to the board spec, and adds the 2nd i2c bus offset.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Sat Sep 27 14:40:57 2008 +0800
+
+ Fix the incorrect DDR clk freq reporting on 8536DS
+
+ On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
+ The display is still sync mode DDR freq. This patch try to fix
+ this. The display DDR freq is now the actual freq in both
+ sync and async mode.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 7 10:28:46 2008 -0500
+
+ 85xx: Remove setting of *cache-line-size in device trees
+
+ ePAPR says if the *cache-block-size is the same as *cache-line-size
+ than we don't need the *cache-line-size property.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cd3cb0d9269d155276b00207e3816a9347fd1c92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Oct 4 07:56:06 2008 -0400
+
+ libfdt: Fix error in documentation for fdt_get_alias_namelen()
+
+ Oops, screwed up the function name in the documenting comment for this
+ function. Trivial correction in this patch.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 20 16:55:14 2008 +1000
+
+ libfdt: Add function to explicitly expand aliases
+
+ Kumar has already added alias expansion to fdt_path_offset().
+ However, in some circumstances it may be convenient for the user of
+ libfdt to explicitly get the string expansion of an alias. This patch
+ adds a function to do this, fdt_get_alias(), and uses it to implement
+ fdt_path_offset().
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Oct 2 01:55:38 2008 -0400
+
+ cfi_flash: do not reset flash when probe fails
+
+ The CFI flash driver starts at flash_init() which calls down into
+ flash_get_size(). This starts by calling flash_detect_cfi(). If said
+ function fails, flash_get_size() finishes by attempting to reset the
+ flash. Unfortunately, it does this with an info->portwidth set to 0x10
+ which filters down into flash_make_cmd() and that happily smashes the
+ stack by sticking info->portwidth bytes into a cfiword_t variable that
+ lives on the stack. On a 64bit system you probably won't notice, but
+ killing the last 8 bytes on a 32bit system usually leads to a corrupt
+ return address. Which is what happens on a Blackfin system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 26 17:03:26 2008 +0200
+
+ fdt: Overwrite /chosen node in bootm if it already exists in the dtb
+
+ Set force parameter in fdt_chosen() call in do_bootm_linux() call.
+ Without this, the chosen node is not overwritten if it already
+ exists.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Sep 25 11:02:17 2008 -0500
+
+ Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
+
+ Using Gcc 4.3 detected this problem:
+
+ ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
+ ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
+ occur when assuming that (X + c) < X is always false
+
+ To fix the problem, treat the offset as an unsigned int.
+
+ The problem report and proposed fix were provided
+ by Steve Papacharalambous <stevep@freescale.com>.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Aug 29 14:19:13 2008 +1000
+
+ libfdt: Fix bugs in fdt_get_path()
+
+ The current implementation of fdt_get_path() has a couple of bugs,
+ fixed by this patch.
+
+ First, contrary to its documentation, on success it returns the length
+ of the node's path, rather than 0. The testcase is correspondingly
+ wrong, and the patch fixes this as well.
+
+ Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
+ instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
+ Specifically this happens when there is insufficient space even to
+ hold the path's second last component. This behaviour is corrected,
+ and the testcase updated to check it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 33af3e6656e84660d397b5dd95abab2dccc36f83
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 1 12:34:58 2008 +0200
+
+ TQM5200: enable support for ATAPI devices
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 15 05:48:25 2008 +0200
+
+ Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
+
+ we need this due to the arm implementation which supposed that U-Boot
+ is in RAM when we jump to start_armboot
+
+ This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
+ in order to do it for all arm board
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Sep 24 08:46:25 2008 -0500
+
+ mpc83xx: don't disable autoboot
+
+ bootdelay set to -1 'permanently' disables autobooting, even if
+ bootcmd is specified. Change to a positive value to allow
+ autobooting when a bootcmd is set.
+
+ Reported-by: Coray Tate <Coray.Tate@freescale.com>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Sep 24 10:42:15 2008 +0900
+
+ mpc83xx: Fix typo in include/mpc83xx.h
+
+ Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162c41c03179727a1d14262f703c9a8bc40231fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Sep 23 09:38:49 2008 -0500
+
+ mpc83xx: add h/w flash protection to board configs
+
+ the operating system may leave flash in a h/w locked state after writing.
+ This allows u-boot to continue to write flash by enabling h/w unlocking
+ by default.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Sep 11 21:35:36 2008 +0400
+
+ mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
+
+ The spd_dram code shifts the base address, then masks 20 bits, but
+ forgets to shift the base address back. Fix this by just masking the
+ base address correctly.
+
+ Found this bug while trying to relocate a DDR memory at the base != 0.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8fd4166c467a46773f80208bda1ec3b4757747bc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 16:10:43 2008 +0200
+
+ ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
+
+ Depending on the configuration jumper "SATA SELECT", U-Boot disabled
+ either one PCIe node or the SATA node in the device tree blob. This
+ patch removes the unnecessary and even confusing warning, when the node
+ is not found at all.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Sep 19 13:30:06 2008 +0200
+
+ Add missing device types to dev_print() in part.c
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 22 22:23:06 2008 +0200
+
+ Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
+ eventually leads to a machine check. This change assures that DPRAM
+ is allocated only once in that case.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:57:34 2008 +0200
+
+ Fix Spartan-3 definitions.
+
+ A few Spartan-3 definitions erroneously use Spartan-3E size
+ constants. This patch fixes them.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+
+commit 28113e1f0da4146b823ffce37680d31d5685a60b
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:41:58 2008 +0200
+
+ Remove duplicate Spartan-3E definition.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 13:46:17 2008 +0200
+
+ socrates: change default mtest address range
+
+ Running mtest command on socrates without specifying
+ an address range crashes the board. This patch changes
+ default mtest address range to prevent this behavior.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 12:34:45 2008 +0200
+
+ socrates: fix crash after relocation
+
+ Currently U-Boot crashes after relocation to RAM.
+ Changing the CPO value of the DDR SDRAM TIMING_CFG_2
+ register to READ_LAT + 1 (to the value it was before
+ conversion of socrates to new DDR code) fixes the
+ problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 562788b0a303f3528b920d81f547f5ca77ba528e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 11:45:51 2008 +0200
+
+ socrates: fix SPD EEPROM address
+
+ Commit be0bd8234b9777ecd63c4c686f72af070d886517
+ changed SPD EEPROM address to 0x51 and DDR SDRAM
+ detection stopped working. Change this address
+ back to 0x50.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 023824549a370bd185d7129d9a6c86f9be7b86a8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 11:06:50 2008 +0200
+
+ Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
+
+ This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b5d10a13525c07ec6374adf840d7c87553b5f189
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:34:36 2008 +0900
+
+ sh: Fix compile warning
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4a065abf926f128beb36d93449defa0d690e7fef
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:04:26 2008 +0900
+
+ sh: Add support watchdog for SH4A core
+
+ Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
+ And fix some compile warning.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:45:26 2008 +0900
+
+ sh: Fix typo in SH serial driver
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:08:36 2008 +0900
+
+ sh: Add support any page size and empty_zero_page to SH Linux uImage
+
+ Old U-Boot supported 4KB page size only. If this version, Linux
+ kernel can not get command line from U-Boot.
+ SH Linux kernel can change page size and empty_zero_page.
+ This patch support this function and fix promlem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce9f99ddb59628f41dc534e892368a7d66dfc774
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:52 2008 +0900
+
+ sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
+
+ Add function of smc911x, pkt_data_pull and pkt_data_push.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 18 13:57:32 2008 +0200
+
+ ADS5121: fix typo in "rootpath" default setting
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 17 10:17:55 2008 +0200
+
+ Coding style cleanup; update CHANEGLOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 16 06:59:13 2008 -0700
+
+ ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ce47eb402c5e29a025399dc282246414fc492940
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 16 10:04:47 2008 -0500
+
+ Support for multiple SGMII/TBI interfaces for TSEC ethernet
+
+ Fix TBI PHY accesses to use the proper offset in CPU register space. The
+ previous code would incorrectly access the TBI PHY by reading/writing to CPU
+ register space at the same location as would be used to access external PHYs.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7c803be2eb3cae245dedda438776e08fb122250f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 16 18:02:19 2008 +0200
+
+ TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
+
+ After switching to using the CFI flash driver, the correct remapping
+ of the flash banks was forgotten.
+
+ Also, some boards were not adapted, and the old legacy flash driver
+ was not removed yet.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 14 00:59:35 2008 +0200
+
+ Prepare v2008.10-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 13 02:23:05 2008 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0c32565f536609d78feef35c88bbc39d3ac53a73
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 10 09:18:34 2008 -0500
+
+ Update mailing list email and archive addresses
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: autoprobe Lime chip
+
+ This patch is an attempt to implement autoprobing for the Lime
+ presence on the bus.
+ Configure GPCM for Lime CS2 and try to access chip ID registers.
+ Second read atempt delivers register values if the chip is present.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: Add support for new image format.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Sep 11 17:28:18 2008 +0900
+
+ sh: Fix compile error for r2dplus
+
+ netdev.h was not include by r2dplus.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 56844a22b76c719e600047e23b80465a44d76abd
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Sep 11 08:11:23 2008 +0200
+
+ powerpc: Fix bootm to boot up again with a Ramdisk
+
+ Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
+ and this stopped Linux from booting with a Ramdisk. This patch fixes
+ this, by deleting the useless dummy mem reservation.
+
+ When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
+ added to of_size, so we dont need anymore a dummy mem reservation.
+
+ I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
+ system (=0x44 bytes) and rounded it up to 0x80).
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Mon Sep 8 02:46:13 2008 +0200
+
+ Add support for LZMA uncompression algorithm.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0008b6d968160abe2bfd936493f3a516a7c8da20
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:20 2008 +0400
+
+ fsl_elbc_nand: ecclayout cleanups
+
+ This patch deletes oobavail assignments, they're calculated by the nand
+ core code in nand_scan_tail, plus current oobavail values are wrong for
+ the LP NANDs.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:13 2008 +0400
+
+ fsl_elbc_nand: implement support for flash-based BBT
+
+ This patch implements support for flash-based BBT for chips working
+ through ELBC NAND controller, so that NAND core will not have to re-scan
+ for bad blocks on every boot.
+
+ Because ELBC controller may provide HW-generated ECCs we should adjust
+ bbt pattern and bbt version positions in the OOB free area.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 97ae023648e764f794ffb9c52da109d6caf09c47
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:04 2008 +0400
+
+ fsl_elbc_nand: fix OOB workability for large page NAND chips
+
+ For large page chips, nand_bbt is looking into OOB area, and checking
+ for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
+ reserved for bbt means.
+
+ But ELBC driver is specifying ecclayout so that oobfree area starts at
+ offset 1, so only one byte left for the bbt purposes.
+
+ This causes problems with any OOB users, namely JFFS2: after first mount
+ JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
+
+ OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+
+ And on the next boot, NAND core will rescan for bad blocks, then will
+ see "0xff 0x19" pattern, and will mark all blocks as bad ones.
+
+ To fix the issue we should implement our own bad block pattern: just one
+ byte at OOB start. Though, this will work only for x8 chips. For x16
+ chips two bytes must be checked. Since ELBC driver does not support x16
+ NANDs (yet), we're safe for now.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7238ada313057a85409485b8ee21515dc10c07a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 12 13:52:21 2008 +0200
+
+ MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b18410e508a12ba0a177dfc2a386857c806fa96d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 11 13:05:56 2008 +0200
+
+ ppc4xx: Enable device tree (FDT) support in zeus board port
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Sep 10 16:53:47 2008 +0200
+
+ ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
+
+ This patch fixes a problem introdiced with patch
+ bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
+ initdram()].
+
+ The boards affected are:
+ - PCI405
+ - PPChameleonEVB
+ - quad100hd
+ - taihu
+ - zeus
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 61737c59a3285f6fadf96a5836879898c04ec28d
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:26 2008 -0400
+
+ ppc4xx: Add .gitignore file to xilinx-ppc440 boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:25 2008 -0400
+
+ ppc4xx: Fix compilation of v5fx30teval_flash
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Sep 10 17:44:30 2008 -0400
+
+ ppc4xx: Fix in-tree build for ppc440-generic boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM: synchronize mach-types.h with linux 2.6.27-rc6
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
+
+ This patch prevents linker error on AT91RM9200 boards, if
+ CONFIG_CMD_I2_TREE is set.
+ It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 03db53335c8eba656a7c44d1555b1a4514383e33
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ make: Remove redundant __ARM__ addition when cross-compiling on *BSD
+
+ __ARM__ is given by arm_config.mk automatically.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
+Author: Claudio Scordino <claudio@evidence.eu.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ Fix MACH_TYPE for the AT91RM9200DK board.
+
+ Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
+
+commit 274737e5eb25b2bcd3af3a96da923effd543284f
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.mx change get_timer(base) to return time since base
+
+ This patch changes get_timer() for i.MX to return the time since
+ 'base' instead of the time since the counter was at zero.
+
+ Symptom seen is flash timeout errors when erasing or programming a
+ sector using the common cfi flash code.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 48fed40575b3e8eae960eb0141509ddd9a73012a
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.MX use u-boot baud rate and don't assume UART master clock
+
+ 1) Change the i.MX serial driver to use the baud rate set in the
+ u-boot environment
+
+ 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
+
+ 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
+ one to clear" like other status bits in the reg.)
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 6e1551a870d360805b9d172dc56d935064abe71d
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ arm920t fix constant error in start.S
+
+ Code in cpu/arm920t/start.S will die with a compilation error if
+ CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
+ the ARM sub instruction. Change the code so that each is subtracted
+ independently to avoid the error.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Fri Sep 12 02:20:40 2008 +0200
+
+ ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
+
+ - Correct Invalid #define of MPUTIM_PTV_MASK for
+ omap1510 & omap730 register definition
+
+ MPUTIM_PTV_MASK is defined as
+ #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+
+ while it should have been
+ #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
+
+ - Below Patch corrects the same
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Fri Jul 18 11:52:02 2008 -0400
+
+ Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit eb16135df20535b0d19969f50fb5bd17f95e9c25
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Aug 28 12:25:11 2008 +0200
+
+ i.MX31: document timer precision option
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1a6337b01351b82a45b0defa76f08744511c580b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:18 2008 +0200
+
+ i.MX31: Make the SPI bus and chip select configurable for MC13783
+
+ The i.MX31 has three SPI buses and each bus has several chip selects
+ and the MC13783 chip can be connected to any of these. The current
+ RTC driver for MC13783 is hardcoded for CSPI2/SS2.
+
+ This patch makes make MC13783 SPI bus and chip select configurable
+ via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8c4ebec25b21e355b8488698ec1594da9701fff4
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:17 2008 +0200
+
+ i.MX31: Add reset_timer() and modify get_timer_masked().
+
+ This patch adds the reset_timer() function (needed by nand_base.c) and
+ modifies the get_timer_masked() to work in the same way as the omap24xx
+ function.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit deeec4991a55de243787002ede24d2331d234fc8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0e8d158664a913392cb01fb11a948d83f72e105e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:06 2008 +0200
+
+ rename CFG_ENV macros to CONFIG_ENV
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ nvedit: rename error comment to CONFIG_ENV_IS_IN_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b64b775e7546ed138df360ceb3a71ee358cb9a01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ cmd_mem: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ move cmd_get_data_size to command.c
+
+ add CMD_DATA_SIZE macro to enable it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 507641d2491980531932b9f25dab37fe5e6c3a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ env_flash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5a1aceb0689e2f731491838970884a673ef7e7d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:03 2008 +0200
+
+ cleanup use of CFG_ENV_IS_IN_FLASH
+
+ - #if CFG_ENV_IS_IN_FLASH
+ - #if (CFG_ENV_IS_IN_FLASH == 1)
+ - #define CFG_ENV_IS_IN_FLASH 0
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ rename environment.c in env_embedded.c to reflect is functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c0878af6e32f0fd8e13a6ca315b9add64441115a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ env_nowhere: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93f6d72544da4510a146bc4c93d609b0116cde37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2556ef78113b5f089dfcac5da90bf31dd568397b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_sf: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55c5f49910ec8225347aa1d211352a84de6649b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_onenand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9656138ff1a34d4c4768db6b490deffc40ee674b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 957a0e69575683efd70ace147746bbb3d8e7c501
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nvram: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9314cee6917444ab88bd4e758da7a30975120187
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 51bfee192099206a4397f15f3b93516e01f58ab0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ env_dataflash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 057c849c45b9ee19df8ff3acdeee66be52819962
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:52 2008 +0200
+
+ cmd_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:54 2008 +0200
+
+ env_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:30 2008 +0200
+
+ rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 32628c5008105a732212003d83b75f05e5243bb2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:54:58 2008 +0200
+
+ cmd_mac: Move conditional compilation to Makefile
+
+ finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
+ start in commit ad8f8687b78c3e917b173f038926695383c55555
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e5648acab153f0f429bfc714902c5aaa7879f71b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:41 2008 +0200
+
+ cmd_fdc: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:38 2008 +0200
+
+ common/Makefile: add core command section
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:29:57 2008 +0200
+
+ cmd_vfd: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6644641d072aee3087da129d8443187196a4d8a9
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Sep 10 11:48:49 2008 -0500
+
+ delta, zylonite: Update nand_oobinfo to nand_ecclayout.
+
+ This is part of the switch to newer upstream MTD code.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Sat Aug 30 17:06:55 2008 -0400
+
+ ARM DaVinci: Fix broken HW ECC for large page NAND.
+
+ Based on original patch by Bernard Blackham <bernard@largestprime.net>
+
+ U-boot's HW ECC support for large page NAND on Davinci is completely
+ broken. Some kernels, such as the 2.6.10 one supported by
+ MontaVista for DaVinci, rely upon this broken behaviour as they
+ share the same code for ECCs. In the existing scheme, error
+ detection *might* work on large page, but error correction
+ definitely does not. Small page ECC correction works, but the
+ format is not compatible with the mainline git kernel.
+
+ This patch adds ECC code that matches what is currently in the
+ Davinci git repository (since NAND support was added in 2.6.24).
+ This makes the ECC and OOB layout written by u-boot compatible with
+ Linux for both small page and large page devices and fixes ECC
+ correction for large page devices.
+
+ The old behaviour can be restored by defining the macro
+ CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Sep 10 11:15:28 2008 +0200
+
+ muas3001: update BR4 settings
+
+ Also set up the port pins for using I2C.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3591293509e0c0bcf244b0f974775bff2e25697e
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date: Wed Sep 10 09:43:49 2008 +0300
+
+ autoscr: Fix one-character lines and non-newline terminated scripts
+
+ When not using hush, the autoscr command now executes lines that are
+ only one character long. It also runs the last line of scripts even if
+ it does not end in a newline.
+
+ Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+
+commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 9 15:13:29 2008 -0700
+
+ ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
+
+ On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
+ and glacier.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+
+commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:21:11 2008 +0200
+
+ muas3001: added support for the LM75 sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:20:19 2008 +0200
+
+ muas3001: activate WDT for the muas3001 board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:19:36 2008 +0200
+
+ muas3001: added 64MB SDRAM autodetection.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5251469943895de4bb9a04d5053352cc22acb7d5
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Thu Aug 21 07:12:26 2008 -0700
+
+ Fix printf errors under -DDEBUG
+
+ Fix printf format-string/arg mismatches under -DDEBUG.
+
+ These warnings occur with DEBUG defined for a platform using
+ cpu/mpc85xx. Users of other architectures can unearth similar
+ problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
+ after "CFLAGS += $(call cc-option,-fno-stack-protector)".
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 23:55:18 2008 +0200
+
+ Update CHANGELOG, prepare 2008-10-rc1 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 08:51:29 2008 -0500
+
+ 85xx: Ensure timebase is zero on secondary cores
+
+ The e500um says the timebase is volatile out of reset. To ensure
+ TB sync works we need to make sure its zero.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 22:18:24 2008 +0200
+
+ bootm_load_os: fix load_end debug message
+
+ print load_end value not pointer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1d9af0be764960e6cc1c093e97176c3542796820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 22:18:23 2008 +0200
+
+ bootm: enable fdt support only on ppc, m68k and sparc
+
+ ...as done in image.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 748b5274e76f81df85cfcffaffedc323678d0623
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Tue Sep 9 18:51:05 2008 +0200
+
+ common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Tue Sep 9 17:31:46 2008 +0200
+
+ gitignore: add tags files and Vim swap file
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 1d9b67b23fca6a25154333733204339802510720
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Sep 9 17:52:47 2008 +0900
+
+ add board_eth_init() for sh7785lcr board
+
+ Fix the problem that cannot work RTL8169 on sh7785lcr board.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+
+commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 16:08:41 2008 -0500
+
+ mtd: SPI Flash: Support the STMicro Flash
+
+ Add MTD SPI Flash support for M25P16, M25P20, M25P32,
+ M25P40, M25P64, M25P80, M25P128.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 17:55:31 2008 +0200
+
+ trab: fix build problem after change to use do_div()
+
+ We must link with libgeneric now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
+Author: Ryan CHEN <ryan.chen@st.com>
+Date: Wed Aug 20 13:00:17 2008 -0400
+
+ Correct drv_usb_kbd_init function
+
+ The patch is that check if usb_get_dev_index() function return valid
+ pointer. If valid, continue. Otherwise return -1.
+
+ Signed-off-by: Ryan Chen <ryan.chen@st.com>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:22:02 2008 +0200
+
+ Make usb-stop() safe to call multiple times in a row.
+
+ A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
+ enabled the usb_stop() command in common/cmd_bootm.c which was
+ not enabled for some time, because no board did actually set the
+ CFG_CMD_USB flag. So, now the usb_stop() is executed before
+ loading the linux kernel.
+
+ However, the usb_ohci driver hangs up (at least on AT91SAM) if the
+ driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
+ If some other piece of code calls usb_stop() before the bootm command,
+ this command will hangup the system during boot.
+ (usb start and stop is typically used while booting from usb memory stick)
+
+ But, stopping the usb stack twice is useless anyway, and a flag already
+ existed that kept track on the usb_init()/usb_stop() calls.
+ So, we now check if the usb stack is really started before we stop it.
+
+ This problem is now fixed in both the upper as low-level layer.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 16:55:47 2008 +0200
+
+ Makefile: fix bug introduced by commit 47ffd6c2
+
+commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Sep 9 10:00:33 2008 -0400
+
+ ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
+
+ This patch solves the problems compiling ml507, v5fx30teval and
+ ppc440-generic out of tree.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
+Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+Date: Thu Sep 4 15:35:46 2008 -0300
+
+ Fix dev_print when called from usb_stor_info (usb storage command)
+
+ Fix output of the usb storage command. It was printing "Device 0: not
+ available" because IF_TYPE_USB was not included into the switch
+ statement.
+
+ Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+
+commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 9 12:58:16 2008 +0200
+
+ FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 919f550dc11a13abf01c6bc713c968de790b8d7c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 9 12:58:15 2008 +0200
+
+ FIT: add ability to check hashes of all images in FIT, improve output
+
+ - add function fit_all_image_check_hashes() that verifies if all
+ hashes of all images in the FIT are valid
+ - improve output of fit_image_check_hashes() when the hash check fails
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1de1fa408967cef6804bb046b904114519bb36f0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 20:54:39 2008 +0200
+
+ qemu_mips: Update linux bootm to support dynamic cmdline
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 8 14:56:49 2008 -0500
+
+ Add support for booting of INTEGRITY operating system uImages
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 21:01:29 2008 +0200
+
+ mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 13:57:12 2008 -0500
+
+ Remove support for booting ARTOS images
+
+ Pantelis Antoniou stated:
+ AFAIK, it is still used but the products using PPC are long gone.
+ Nuke it plz (from orbit).
+
+ So remove it since it cleans up a usage of env_get_char outside of
+ the environment code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 15:45:18 2008 +0200
+
+ Makefile: compile and link each module just once
+
+ Several source files need to be compiled and linked when one or more
+ config options are selected. To allow for easy selection in the
+ Makefiles yet to avoild multiple compilation (which costs build time)
+ and especially multiple linking (which causes errors), we use
+ "COBJS = $(sort COBJS-y)" which eliminates duplicates.
+
+ By courtesy of Detlev Zundel who suggested this approach.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 48d0192fe869948fef14b460b5f0c85bca933693
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Sep 8 14:30:53 2008 +0200
+
+ Moved conditional compile into Makefile
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Sep 8 10:17:31 2008 +0200
+
+ Merged serial_pl010.c and serial_pl011.c.
+
+ They only differ in the init function.
+ This also adds the missing watchdog support for the PL011.
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 0817d688f307ee2c0598e79175c94a40ce90337b
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Sun Sep 7 17:10:27 2008 -0400
+
+ Remove gap fill in srec object v2
+
+ SREC files do not need gap fill: The load address is specified in the
+ file. On the other hand, it can't be avoided in a .bin object. It has
+ no information about memory location.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Sun Sep 7 20:18:27 2008 +0200
+
+ README: fix missing subdirectory in the documentation
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Sep 7 07:08:42 2008 +1000
+
+ Update i386 code (sc520_cdp)
+
+ Attempt to bring i386 / sc520 inline with master
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 5608692104efa8d56df803dc79ea41ac3607eee5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 4 13:01:49 2008 +0200
+
+ fw_env: add NAND support
+
+ Add support for environment in NAND with automatic NOR / NAND recognition,
+ including unaligned environment, bad-block skipping, redundant environment
+ copy.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 9 09:50:24 2008 +0200
+
+ ppc4xx: Fix out-of-tree building of CPCI405 variants
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 59f630588e3fdbd698a0a2798e52a8924e899563
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit e64987a892353f3d49eb242d997820ef8f538912
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 3e79b588b5199f35016f178fc0d5d1266382097f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e8d18541c6ceab821f75faab031740b33fdbfa4b
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:08:02 2008 +0200
+
+ lib_ppc/interrupts.c: make board_show_activity() a weak function
+
+ This allows to use show_activity() without having to
+ define an empty board_show_activity() function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fe876787f8743883ce58fed61525eaa2f34da4c5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:06:44 2008 +0200
+
+ stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 965de106ba8900372c8b16dc60d5acab7f925e38
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:03:47 2008 +0200
+
+ NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 36241ca29d4804a1006fb3f26069effda5202581
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 01:22:39 2008 +0200
+
+ disk-on-chip: remove duplicate doc_probe declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 00:59:40 2008 +0200
+
+ onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 00:59:39 2008 +0200
+
+ rs5c372: fix rtc_set prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Aug 14 14:08:28 2008 +0200
+
+ ARM: fix warning: target CPU does not support interworking
+
+ This patch fixes warnings like this:
+
+ start.S:0: warning: target CPU does not support interworking
+
+ which come from some ARM cross compilers and are caused by hard-coded
+ (with "--with-cpu=arm9" configuration option) ARM targets (which
+ support ARM Thumb instructions), while the ARM target selected from
+ the command line (with "-march=armv4") doesn't support Thumb
+ instructions.
+
+ This warning is issued by the compiler regardless of the real use of
+ the Thumb instructions in code.
+
+ To fix this problem, we use options according to compiler version
+ being used.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4265c35fbcb248e58179007621d61d32d0b3b82a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Aug 14 14:08:28 2008 +0200
+
+ ARM: Use do_div() instead of division for "long long".
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8febd13c69cb68652577d1a9fcbde954bf784155
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 23:26:22 2008 +0200
+
+ lib_arm/bootm.c: fix compile warnings
+
+ bootm.c:128: warning: label 'error' defined but not used
+ bootm.c:65: warning: unused variable 'ret'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2e3c867d0a63c563a51e65b776973b008f16cec5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:46:42 2008 +0200
+
+ ml507: fix out of tree build problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:10:28 2008 +0200
+
+ common/cmd_bootm.c: fix printf() format warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:37:45 2008 +0200
+
+ BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
+
+ missing doc_probe() prototype.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c5e3cc4994897d364b148942ff23e47783198f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 21:28:14 2008 +0200
+
+ mk48t59: fix compile problem introduced by commit d1e23194
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ff889349d2ace13f10c9335e09365fcec8247cc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 8 14:11:12 2008 +0200
+
+ ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
+
+ This patch moves some 4xx specific prototypes out of include common.h
+ to a ppc4xx specific header.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ac53ee8318678190bf3c68da477a84a657d86fb0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:04 2008 +0200
+
+ ppc4xx: Update CPCI405(AB) configuration
+
+ This patch add FDT support and command line editing capabilities
+ for CPCI405 and CPCI405AB boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:03 2008 +0200
+
+ ppc4xx: Cleanup CPCI405 linker script
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:02 2008 +0200
+
+ ppc4xx: Update CPCI405 variants handling
+
+ This patch replaces the BOARD_REVISION variable in include/config.mk
+ by a using a temporary include file in the platform directory.
+
+ The former way does not work anymore and the latter is also used by
+ some other boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 8 10:01:48 2008 +0200
+
+ ppc4xx: Remove CONFIG_CS8952_PHY define
+
+ Since this define is only used on one board that was never really in
+ production, removing this compile time option doesn't hurt and makes
+ the code more readable.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 14:11:40 2008 +0200
+
+ ppc4xx: Fix compilation warning for PIP405
+
+ This patch fixes a compilation warning for the PIP405 board. It moves the
+ #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
+ occur anymore. I am a little unsure if this #ifdef is at the correct
+ place now or if it could be removed completely. This needs to get
+ tested on the PIP405 board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 14:09:09 2008 +0200
+
+ ppc4xx: Fix compilation warning for canyonlands & glacier
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 5 14:40:29 2008 -0500
+
+ Fix compiler warning in mpc8xxx ddr code
+
+ ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
+ ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
+ ctrl_regs.c:523: note: 'caslat' was declared here
+
+ Add a warning in DDR1 case if cas_latency isn't a value we know about.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 23:06:23 2008 +0200
+
+ rtc: allow rtc_set to return an error and use it in cmd_date
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 01:16:33 2008 +0200
+
+ ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Aug 31 05:37:04 2008 +0900
+
+ config.mk: Move arch-specific condition to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 29 19:08:29 2008 -0500
+
+ Prevent crash if random/invalid ramdisks are passed to bootm
+
+ Adds returning an error from the ramdisk detection code if
+ its not a real ramdisk (invalid). There is no reason we can't
+ just return back to the console if we detect an invalid
+ ramdisk or CRC error.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 29 21:04:45 2008 +0200
+
+ Prevent crash if random DTB address is passed to bootm
+
+ This patch adds bootm_start() return value check. If
+ error status is returned, we do not proceed further to
+ prevent board reset or crash as we still can recover
+ at this point.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Aug 29 12:30:39 2008 -0500
+
+ clean up some #if !defined() in drivers/video/cfb_console.c
+
+ rearrange some #if !defined() / #else / #endif statements to remove
+ the negative logic.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Fri Aug 29 09:02:20 2008 +0900
+
+ apollon: use the last memory area for u-boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 28 13:50:42 2008 +0200
+
+ TQM8272: move NAND part in seperate File
+
+ I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
+ because I have no longer access to the hardware.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 28 13:48:36 2008 +0200
+
+ TQM8272: Fix compiling error for the TQM8272 board.
+
+ Fix compile problems caused by
+ commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 1a7f8ccec981648ccd38fca2535490582eee08e6
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Aug 27 14:45:20 2008 +0900
+
+ Add JFFS2 command support on OneNAND
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Mon Aug 25 19:21:30 2008 +0100
+
+ Allow console input to be disabled
+
+ Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
+
+ When CONFIG_DISABLE_CONSOLE is defined, setting
+ GD_FLG_DISABLE_CONSOLE disables all console input and output.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2b22d608f370565c87f55928b524207031419c11
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 30 12:39:29 2008 +0200
+
+ loads: allow negative offsets
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Sep 4 11:19:05 2008 +0200
+
+ USB EHCI: reset root hub
+
+ Some of multi-function USB controllers (e.g. ISP1562) allow root hub
+ resetting only via EHCI registers. So, this patch adds the
+ corresponding kind of reset to OHCI's hc_reset() if the newly
+ introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
+ board).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 5875d358f025c1b042d8a0f08384b756de7256c9
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Aug 15 15:42:09 2008 +0200
+
+ RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 10:47:46 2008 +0200
+
+ devices: Use list_add_tail() instead of list_add() to register a device
+
+ This patch fixes a problem spotted on Glacier/Canyonlands (and most
+ likely lots of other board ports), that no serial output was seen
+ after console initialization in console_init_r(). This is because the
+ last added console device was used instead of the first added.
+
+ This patch fixes this problem by using list_add_tail() instead of
+ list_add() to register a device. This way the first added console
+ is used again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d78236896d62bb8ca7302af38d8f1493eb2651
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Thu Sep 4 23:49:36 2008 -0700
+
+ ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
+
+ This patch adds GPCS, SGMII and M88E1112 PHY support
+ for the AMCC PPC460GT/EX processors.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Sep 3 12:26:59 2008 -0700
+
+ ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 075d0b81e896e8735ae26372cd384f87cbd24e41
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Sep 3 12:26:28 2008 -0700
+
+ ppc4xx: IBM Memory Controller DDR autocalibration routines
+
+ Alternate SDRAM DDR autocalibration routine that can be generically used
+ for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
+ support of more DIMM/memory chip vendors and gets the DDR autocalibration
+ values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
+
+ Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
+ "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
+ of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
+ lot longer to run than Method_B. Method_B executes in the same amount of time
+ as the currently existing DDR autocalibration routine, i.e. 1 second or so.
+ Normally Method_B is used and it is set as the default method.
+
+ The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
+ Controller registers.[bit-field]:
+ 1) SDRAM0_RQDC.[RQFD]
+ 2) SDRAM0_RFDC.[RFFD]
+
+ This alternate PPC4xx DDR autocalibration code calibrates the following
+ IBM SDRAM Controller registers.[bit-field]:
+
+ 1) SDRAM0_WRDTR.[WDTR]
+ 2) SDRAM0_CLKTR.[CKTR]
+ 3) SDRAM0_RQDC.[RQFD]
+ 4) SDRAM0_RFDC.[RFFD]
+
+ and will also use the calibrated settings of the above four registers that
+ produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
+ register.[bit-field].
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e07f4a8033b6270b8103049adb6456f660ff4a89
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Sep 1 13:09:39 2008 -0400
+
+ ppc44x: Unification of virtex5 pp440 boards
+
+ This patch provides an unificated way of handling xilinx v5 ppc440 boards.
+
+ It unificates 3 different things:
+
+ 1) Source code
+ A new board called ppc440-generic has been created. This board includes
+ a generic tlb initialization (Maps the whole memory into virtual) and
+ defines board_pre_init, checkboard, initdram and get_sys_info weakly,
+ so, they can be replaced by specific functions.
+
+ If a new board needs to redefine any of the previous functions
+ (specific initialization) it can create a new directory with the
+ specific initializations needed. (see the example ml507 board).
+
+ 2) Configuration file
+ Common configurations are located under configs/xilinx-ppc440.h, this
+ header file interpretes the xparameters file generated by EDK and
+ configurates u-boot in correspondence. Example: if there is a Temac,
+ allows CMD_CONFIG_NET
+ Specific configuration are located under specific configuration file.
+ (see the example ml507 board)
+
+ 3) Makefile
+ Some work has been done in order to not duplicate work in the Main
+ Makefile. Please see the attached code.
+
+ In order to support new boards they can be implemented in the next way:
+
+ a) Simple Generic Board (90% of the time)
+ Using EDK generates a new xparameters.h file, replace
+ ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
+ && make
+
+ b) Simple Boards with special u-boot parameters (9 % of the time)
+ Create a new file under configs for it (use ml507.h as example) and
+ change your paramaters. Create a new Makefile paragraph and compile
+
+ c) Complex boards (1% of the time)
+ Create a new folder for the board, like the ml507
+
+ Finally, it adds support for the Avnet FX30T Evaluation board, following
+ the new generic structure:
+
+ Cheap board by Avnet for evaluating the Virtex5 FX technology.
+
+ This patch adds support for:
+ - UartLite
+ - 16MB Flash
+ - 64MB RAM
+
+ Prior using U-boot in this board, read carefully the ERRATA by Avnet
+ to solve some memory initialization issues.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Tue Sep 2 15:21:16 2008 -0500
+
+ mpc83xx: fix mpc8313 in-tree building with NAND
+
+ and add mpc8313 NAND build to MAKEALL
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:25 2008 -0700
+
+ mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
+
+ Cleans up some latent issues with the data cache control so that
+ dcache_enable() and dcache_disable() will work reliably (after
+ unlock_ram_in_cache() has been called)
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:19 2008 -0700
+
+ mpc83xx: Store and display Arbiter Event Register values
+
+ Record the Arbiter Event Register values and optionally display them.
+
+ The Arbiter Event Register can record the type and effective address of
+ an arbiter error, even through an HRESET. This patch stores the values in
+ the global data structure.
+
+ Display of the Arbiter Event registers immediately after the RSR value
+ can be enabled with defines. The Arbiter values will only be displayed
+ if an arbiter event has occured since the last Power On Reset, and either
+ of the following defines exist:
+ #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
+ and type register values
+ #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
+ event register values
+
+ Address Only transactions are one of the trapped events that can register
+ as an arbiter event. They occur with some cache manipulation instructions
+ if the HID0_ABE (Address Broadcast Enable) is set and the memory region
+ has the MEMORY_COHERENCE WIMG bit set. Setting:
+ #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
+ only events, so that it can still capture
+ other real problems.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:11 2008 -0700
+
+ mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Fri Aug 22 23:52:50 2008 -0700
+
+ MPC83XX: Fix GPIO configuration - set gpio level before direction
+
+ Set DAT value before DIR values to avoid creating glitches on the
+ GPIO signals.
+
+ Set gpio level register before direction register to inhibit
+ glitches on high level output pins.
+
+ Dir and data gets cleared at powerup, so high level output lines see
+ a short low pulse between setting the direction and level registers.
+
+ Issue was seen on a new board with the nReset line of the NOR flash
+ connected to a GPIO. Setting the direction register puts the NOR flash
+ in reset so the next instruction to set the level cannot get executed.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7007c5975ee900ad70983b0681d3251e221f8321
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 2 02:58:32 2008 +0200
+
+ doc/qemu_mips: add doc howto debug u-boot with gdb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 3 17:15:45 2008 +0200
+
+ ppx4xx: Fix broken DASA_SIM board
+
+ This patch adds initdram() to DASA_SIM boards that has been
+ removed accidentally by a previous commit.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 1 08:35:37 2008 +0200
+
+ ppc4xx: Remove reference to common/lists.o from some esd linker scripts
+
+ This patch removes some direct references to common/lists.o from some
+ esd linker scripts. This is necessary because the lists source was moved
+ and is not in the "common" directory anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97b0734d65f8a0b03df0a335a2addc759da56107
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 16:33:05 2008 +0200
+
+ ppc4xx: Remove obsolete or unused functions from some esd boards
+
+ This patch removes initdram() and testdram() from most esd 405 platforms.
+ Some boards also have an empty dummy implementation of
+ misc_init_f(). This is also removed.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:54 2008 +0200
+
+ ppc4xx: Update VOM405 board configuration
+
+ - remove PCI code
+ - add command line editing
+ - minor cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:53 2008 +0200
+
+ ppc4xx: Remove obsolete initdram() function from VOM405 board
+
+ This patch removed the obsolete initdram() function from
+ VOM405 platform file.
+
+ Some minor cleanup.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:52 2008 +0200
+
+ ppc4xx: Cleanup VOM405 linker script
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
+Author: Matthias Fuchs <mf@esd.eu>
+Date: Tue Sep 2 15:07:51 2008 +0200
+
+ ppc4xx: Add fdt support for VOM405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:36:14 2008 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Wrap long lines etc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:56 2008 +0200
+
+ ppc4xx: Enable USB on PLU405 boards
+
+ This patch enables the PCI-OHCI controller on PLU405 board.
+
+ Also the default CPU frequency is updated to 266 MHz and
+ command line editing is enabled.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:35 2008 +0200
+
+ ppc4xx: Cleanup PLU405 platform file
+
+ This patch
+ - wraps some long lines
+ - removes unused/obsolete functions: misc_init_f() and initdram()
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:04 2008 +0200
+
+ ppc4xx: Cleanup PLU405 linker script
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:34:36 2008 +0200
+
+ ppc4xx: Add fdt support for PLU405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:34:08 2008 +0200
+
+ ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be1b0d2777e179191a57b138b660547a17e55aad
+Author: Jochen Friedrich <jochen@scram.de>
+Date: Tue Sep 2 11:24:59 2008 +0200
+
+ Don't tftp to unknown flash
+
+ If a board has a variable number of flash banks, there are empty entries
+ in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
+ "Outside available Flash". This patch skips flash banks with unknown
+ flash ids.
+
+ Signed-off-by: Jochen Friedrich <jochen@scram.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:44 2008 +0900
+
+ net: smc911x: Add pkt_data_pull and pkt_data_push function
+
+ The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
+ Byte-swapping is necessary, and so poor performance is inevitable.
+ This problem cannot evade by the swap function of CHIP, this can
+ evade by software Byte-swapping.
+ And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+ functions necessary to solve this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 20:37:00 2008 -0700
+
+ Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ db64360
+ db64460
+ katmai
+ taihu
+ taishan
+ yucca
+ cpc45
+ cpu87
+ eXalion
+ elppc
+ debris
+ kvme080
+ mpc8315erdb
+ integratorap
+ ixdp425
+ oxc
+ pm826
+ pm828
+ pm854
+ pm856
+ ppmc7xx
+ sc3
+ sc520_spunk
+ sorcery
+ tqm8272
+ tqm85xx
+ utx8245
+
+ Removed initialization of the driver from net/eth.c
+ Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:45:44 2008 -0700
+
+ Moved initialization of TULIP Ethernet controller to board_eth_init()
+
+ Affected boards:
+ cu824
+ bab7xx
+ adciop
+ dasa_sim
+ mousse
+ mpc8540eval
+ musenki
+ mvblue
+ pcippc2/pcippc6
+ sbc8240
+ stxssa
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:44:19 2008 -0700
+
+ Moved initialization of E1000 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ ap1000
+ mvbc_p
+ PM854
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:40:51 2008 -0700
+
+ Moved initialization of plb2800 Ethernet driver to board_eth_init
+
+ Affected boards:
+ purple
+
+ Removed initialization of controller from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:39:12 2008 -0700
+
+ Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
+
+ Modified board_eth_init() functions of boards that have this FEC in addition
+ to other Ethernet controllers.
+
+ Affected boards:
+ bc3450
+ icecube
+ mvbc_p
+ o2dnt
+ pm520
+ total5200
+ tq5200
+
+ Removed initialization of controller from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:36:38 2008 -0700
+
+ Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to MPC512x CPU directory and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8218bd2aa68820b878a8413493ae17fd8d21f944
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:16:59 2008 -0700
+
+ Moved initialization of IncaIP Ethernet controller to board_eth_init
+
+ Affected boards:
+ IncaIP
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:15:26 2008 -0700
+
+ Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
+
+ Affected boards:
+ AmigaOneG3SE
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6aca145e067efe75398e9fac97822bd3700de0b2
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:13:34 2008 -0700
+
+ Moved initialization of GT6426x Ethernet controller to board_eth_init()
+
+ Affected boards:
+ EVB64260
+ P3G4
+ ZUMA
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e3090534d62045dcb73f5392bacc64a4e8e443dc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:08:43 2008 -0700
+
+ Moved initialization of PCNET Ethernet controller to board_eth_init()
+
+ Affected boards:
+ PN62
+ sc520_cdp
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:07:16 2008 -0700
+
+ Moved initialization of NATSEMI Ethernet controller to board_eth_init()
+
+ Affected boards:
+ a3000
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:03:22 2008 -0700
+
+ Moved initialization of NS8382X Ethernet controller to board_eth_init()
+
+ Affected boards:
+ bc3450
+ cpci5200
+ mecp5200
+ pf2000
+ icecube
+ o2dnt
+ pm520
+ sandpoint8245
+ total5200
+ tqm5200
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 09:59:33 2008 -0700
+
+ Moved initialization of TSI108 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ mpc7448hpc2
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0b252f50ae218ae15bfb63af44227972686ebc56
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 21:41:08 2008 -0700
+
+ Moved initialization of RTL8139 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ hidden_dragon
+ MPC8544DS
+ MPC8610HPCN
+ R2DPLUS
+ TB0229
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 09:49:42 2008 -0700
+
+ Moved initialization of RTL8169 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ linkstation
+ r7780mp
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ae071e44256144d6c1e3febb65f6c56bd433769
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 12 22:11:53 2008 -0700
+
+ Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
+
+ Removed at91sam9_eth_initialize() from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 22:22:04 2008 -0700
+
+ Introduce netdev.h header file and remove externs
+
+ This addresses all drivers whose initializers have already
+ been moved to board_eth_init()/cpu_eth_init().
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:30 2008 -0500
+
+ Add pixis_set_sgmii command
+
+ The 8544DS and 8572DS platforms support an optional SGMII riser card to
+ expose ethernet over an SGMII interface. Once the card is in, it is also
+ necessary to configure the board such that it uses the card, rather than
+ the on-board ethernet ports. This can either be done by flipping dip switches
+ on the motherboard, or by modifying registers in the pixis. Either way
+ requires a reboot.
+
+ This adds a command to allow users to choose which ports are routed through
+ the SGMII card, and which through the onboard ports. It also allows users
+ to revert to the current switch settings.
+
+ This code does not work on the 8572, as the PIXIS is different.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:29 2008 -0500
+
+ Add SGMII support for the 8544 DS
+
+ The 8544 DS has an optional SGMII Riser card, which uses different PHY
+ addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
+ setup code if so.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 652f7c2eef76a1340928bd660845441e932d86a2
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:28 2008 -0500
+
+ Add support for Freescale SGMII Riser Card
+
+ The 8544DS and 8572DS systems have an optional SGMII riser card which
+ exposes new ethernet ports which are connected to the eTSECs via an
+ SGMII interface. The SGMII PHYs for this board are offset from the standard
+ PHY addresses, so this code modifies the passed in tsec_info structure to
+ use the SGMII PHYs on the card, instead.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:27 2008 -0500
+
+ Add SGMII support to the tsec
+
+ Adds support for configuring the TBI to talk properly with the SerDes.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:26 2008 -0500
+
+ Pass in tsec_info struct through tsec_initialize
+
+ The tsec driver contains a hard-coded array of configuration information
+ for the tsec ethernet controllers. We create a default function that works
+ for most tsecs, and allow that to be overridden by board code. It creates
+ an array of tsec_info structures, which are then parsed by the corresponding
+ driver instance to determine configuration. Also, add regs, miiregs, and
+ devname fields to the tsec_info structure, so that we don't need the kludgy
+ "index" parameter.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:25 2008 -0500
+
+ tsec: Move tsec.h to include/
+
+ This is to prepare the way for board code passing in the tsec_info structure
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:52:44 2008 +0200
+
+ PHY: Add support for the M88E1121R Marvell chip.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 2 21:17:36 2008 +0200
+
+ fw_env.c: fix build problems with MTD_VERSION=old
+
+ (as needed to support old 2.4 Linux kernel based releases)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 17:11:26 2008 +0200
+
+ device: make device_register() clone the device
+
+ This is expected by the callers, but this fact was hidden well within
+ the old list implementation.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c75e772a2f061a508bba28ded1b5bea91f0442b0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:28:15 2008 +0900
+
+ sh: Remove CC line from board's Makefile
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 468eae0660de6fdfd9999944c536ecc4797bd944
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:25:57 2008 +0900
+
+ sh: Replaced "@./mkconfig" for @$(MKCONFIG)
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:50:52 2008 +0900
+
+ sh: Add support sh2 to MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f3d8bb5faa12dbf3031382286784c978df038ee
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:52:23 2008 +0900
+
+ sh: Fix compile error rsk7203 board
+
+ This boards used old type preprocessor.
+ This patch fix compile error.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:53:31 2008 +0900
+
+ sh: Fix compile error sh7785lcr board
+
+ This boards used old type preprocessor.
+ This patch fix compile error.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f0da4972e48f99d37bc522814940a6022cd3084
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Aug 22 17:39:09 2008 +0900
+
+ sh: Renesas Solutions AP325RXA board support
+
+ AP325RXA is SH7723's reference board.
+ This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
+ In this patch, support SCIF, NOR Flash, and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ab09f433b50bb83b5e440c335bc3839ee069e534
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Aug 22 17:48:51 2008 +0900
+
+ sh: add support Renesas SH7723
+
+ Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
+ This patch supports CPU register's header file and SCIF serial driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c655fad06ba3fb042dbc667724a40e1a9a091248
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:02:04 2008 +0900
+
+ sh: Renesas RSK+ 7203 board support
+
+ This adds initial support for the RTE RSK+ SH7203 board.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jul 3 23:11:02 2008 +0900
+
+ sh: Add support Renesas SH7203 processor
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 22:48:33 2008 +0900
+
+ sh: Add support SH2/SH2A which is CPU of Renesas Technology
+
+ Add support SH2/SH2A basic function.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 22:45:08 2008 +0900
+
+ sh: Renesas R0P7785LC0011RL board support
+
+ This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
+ Graphic, Ethernet, USB, SD, RTC, and I2C controller.
+
+ This patch supports the following functions:
+ - 128MB DDR2-SDRAM (29-bit address mode only)
+ - NOR Flash
+ - USB host
+ - Ethernet
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Thu Jul 10 19:32:53 2008 +0900
+
+ sh: add support for SH7785
+
+ Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
+ This patch supports CPU register's header file.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d6e04258be8f2408845468d3cf722a4cf0433445
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:45:42 2008 +0200
+
+ davinci: fix remaining dm644x_eth
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:56 2008 +0200
+
+ fs: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:55 2008 +0200
+
+ devices: merge to list_head
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ef0255fc75f28655f9681422079287d68a14dbaa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:51 2008 +0200
+
+ update linux/list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 00:39:48 2008 +0200
+
+ smdk6400: add gitignore
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 00:39:48 2008 +0200
+
+ smdk6400: Use CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ smdk6400: remove redundant bootargs definition
+
+ Double bootargs setting leads to a duplicated environmant entry.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 11edcfe260f20dcea79284a3e95270989d433854
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ ARM: Add support for S3C6400 based SMDK6400 board
+
+ SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
+ driver for it too. The board can also boot from the NOR flash, but due to
+ hardware limitations it can only address 64KiB on it, which is not enough
+ for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit e0056b341069796eaea11eae0fc8eb93a3dceaac
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ NAND: add NAND driver for S3C64XX
+
+ Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3fe7b589f9c7463df39056f8872006a67f56a91c
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ S3C64XX: remove broken HWFLOW support from the serial driver
+
+ As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
+ broken and currently unused. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ serial: add S3C64XX serial driver
+
+ Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ USB: Add support for OHCI controller on S3C6400
+
+ Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
+ try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
+ it should work too and we could still profit from instruction cache.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 9b07773f8883665b002500c190507e9fd99b7181
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ ARM: Add arm1176 core with S3C6400 SoC
+
+ Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ ARM DaVinci: Changing function names for EMAC driver
+
+ DM644x is just one of a series of DaVinci chips that use the EMAC driver.
+ By replacing all the function names that start with dm644x_* to davinci_*
+ we make these function more portable. I have tested this change on my EVM.
+ DM6467 is another DaVinci SOC which uses the EMAC driver and i will
+ be sending patches that add DaVinci DM6467 support to the list soon.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Sat Aug 30 23:21:30 2008 +0200
+
+ Integrator[AP/CP] - Remove unused file memsetup.S
+
+ - memsetup.s is changed/merged to lowlevel_init.S
+ memsetup.S has a global label memsetup that just returns back to caller
+ - memsetup global label is changed/merged to lowlevel_init
+ This label is not called from anywhere.
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 89d51d022a63be1a851eda983c8cbce1a044f65f
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Aug 27 21:35:52 2008 +0200
+
+ ARM DaVinci: Standardize names of directories/files
+
+ ARM DaVinci: Standardize names of directories/files.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:13 2008 -0400
+
+ ARM DaVinci: Move common functions to board/davinci/common
+
+ ARM DaVinci: Move common functions to board/davinci/common.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit c2b4b2e4814f4ace9015fdb64132894327400bf0
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 29 11:56:49 2008 +0200
+
+ ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
+
+ This function is needed for the new NAND infrastructure. We only need
+ a dummy implementation though for the NDFC.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 29 12:06:27 2008 +0200
+
+ ppc4xx: Increase image size for NAND boot target
+
+ This is needed since now with HUSH enabled (amcc-common.h) the image
+ read from NAND exceeds the previous limit.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 28 23:58:30 2008 -0700
+
+ Move MPC512x_FEC driver to drivers/net
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 80b00af01b3c9154774de2936f05a051e92f6a03
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 28 23:58:29 2008 -0700
+
+ Move MPC5xxx_FEC driver to drivers/net
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:57 2008 +0200
+
+ cmd_terminal: remove no need ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 578118bdf122877ae769776be002255be447b4fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:57 2008 +0200
+
+ common/Makefile: order by functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:56 2008 +0200
+
+ miiphyutil: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81789c39db3f0f6b621df8c0ec66014d701f368e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:37 2008 +0200
+
+ autoscript: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 01:18:11 2008 +0200
+
+ crc16: move to lib_generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55195773eacefb22dd483a3c560ea30a14263ce1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 01:18:01 2008 +0200
+
+ miiphybb: move to drivers/net/phy
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e8314035996a9118ac5948df2ff8a2f2161ed67a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:51 2008 +0200
+
+ soft_spi: move to drivers/spi
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:51 2008 +0200
+
+ soft_i2c: move to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 717a222229fdb77703e9174d0eb08a4b41febf49
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:48 2008 +0200
+
+ gunzip: move to lib_generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 52aef8f9ba28b747973bf76741c23db658d5773c
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Tue Aug 26 19:55:23 2008 +0200
+
+ ppc4xx: NAND configuration
+
+ Made NAND bank configuration setting a config variable.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5bc542a593abc9e974fbd34704af85c37c366c60
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Thu Aug 28 16:03:28 2008 -0700
+
+ ppc4xx: fix UIC external_interrupt hang on UIC0
+
+ This patch fixes a UIC external_interrupt hang if critical or non-critical
+ interrupt is set at the same time as a normal interrupt is set on UIC0.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
+Author: Prodyut Hazarika <phazarika@amcc.com>
+Date: Wed Aug 27 16:39:00 2008 -0700
+
+ ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
+
+ Removed Magic numbers from Initialization preload registers
+ Tested with Kilauea, Glacier, Canyonlands and Katmai boards
+ About 5-7% improvement seen for LMBench memtests
+
+ Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8a490422bed685c9491274ec997f62061d88620b
+Author: John Rigby <jrigby@freescale.com>
+Date: Thu Aug 28 13:17:07 2008 -0600
+
+ ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
+
+ MPC5121 rev 2 silicon has a new register for controlling how long
+ CS is asserted after deassertion of ALE in multiplexed mode.
+
+ The default is to assert CS together with ALE. The alternative
+ is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
+
+ The default is wrong for the NOR flash and CPLD on the ADS5121.
+
+ This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
+ it does so conditionally based on silicon rev 2.0 or greater.
+
+ Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 5d9a5efa4b332f442b54a755d49969123c3a8742
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:56:46 2008 +0600
+
+ Add I2C frequency dividers for ColdFire
+
+ The existing I2C freqency dividers for FDR does not apply
+ to ColdFire platforms; thus, a seperate table is added
+ based on MCF5xxx Reference Manual
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Tabi Timur <timur@freescale.com>
+
+commit eec567a67e00d1ed8d941e9098b7d421f4091abf
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 03:01:19 2008 +0600
+
+ ColdFire: I2C fix for multiple platforms
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d53cf6a9c7423cba668b867978648645f71c3090
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:37:13 2008 +0600
+
+ ColdFire: Add CONFIG_MII_INIT for M5272C3
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f78ced3028d4130b24a318943a70cf5584ab16f4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:26:25 2008 +0600
+
+ ColdFire: Multiple fixes for MCF5445x platforms
+
+ Add FEC pin set and mii reset in __mii_init(). Change
+ legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
+ change cfi_offset to 0, and change CFG_FLASH_CFI to
+ CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
+ M54455EVB env settings in configuration file.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Aug 15 18:24:25 2008 +0000
+
+ ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
+
+ The user manuals recommend 7.
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Aug 15 16:50:07 2008 +0000
+
+ ColdFire: Raise uart baudrate to 115200 bps
+
+ M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
+ uart baudrate increase from 19200 to 115200 bps
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab6ba842682552ccf071d0034da0a20633d1d1ac
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 13 12:07:03 2008 +0000
+
+ ColdFire: Fix board.c warning message
+
+ Implicit declaration of nand_init() warning message
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:10:34 2008 -0500
+
+ FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 21 20:44:49 2008 +0200
+
+ mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 14:46:36 2008 -0500
+
+ mpc85xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ not show how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jul 25 13:31:05 2008 -0500
+
+ mpc85xx: Add support for the MPC8536DS reference board
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 12 11:14:19 2008 -0500
+
+ mpc85xx: Add support for the MPC8536
+
+ The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
+ also have SERDES init code for the 8536.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 12 11:13:08 2008 -0500
+
+ mpc85xx: Add support for the MPC8572DS reference board
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 457caecdbca3df21a93abff19eab12dbc61b7897
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:05:35 2008 -0500
+
+ FSL DDR: Remove old SPD support from cpu/mpc85xx
+
+ All 85xx boards have been converted to the new code so we can
+ remove the old SPD DDR setup code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0e7927db138976469e7257e29c1338050a50fcd9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:04:07 2008 -0500
+
+ FSL DDR: Convert STXSSA to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c360d9b970fbb9c13744c355879671165bbb9b9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:03:42 2008 -0500
+
+ FSL DDR: Convert STXGP3 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e55313b7ae12352a343f9b9962e662dbd897187
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:58 2008 -0500
+
+ FSL DDR: Convert SBC8560 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:32 2008 -0500
+
+ FSL DDR: Convert MPC8540EVAL to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:07 2008 -0500
+
+ FSL DDR: Convert PM856 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d53bd3e17bd4f460257c19255569ea6dcfaae817
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:51:49 2008 -0500
+
+ FSL DDR: Convert PM854 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 33b9079ba20926f14238fff863b68a98e938948e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:15:28 2008 -0500
+
+ FSL DDR: Convert sbc8548 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:14:14 2008 -0500
+
+ FSL DDR: Convert atum8548 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be0bd8234b9777ecd63c4c686f72af070d886517
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 22:56:56 2008 -0500
+
+ FSL DDR: Convert socrates to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 08:02:30 2008 -0500
+
+ FSL DDR: Convert MPC8544DS to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 13:51:05 2008 -0500
+
+ FSL DDR: Convert MPC8568MDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 13:51:06 2008 -0500
+
+ FSL DDR: Convert MPC8548CDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aa11d85cf318b961e029fe50d68ca47d004bce93
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Mar 17 15:48:18 2008 -0500
+
+ FSL DDR: Convert MPC8541CDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2b40edb10d81da7bba724edbccd7f53777112579
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 11:12:42 2008 -0500
+
+ FSL DDR: Convert MPC8555ADS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 11:12:44 2008 -0500
+
+ FSL DDR: Convert MPC8560ADS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jun 6 13:12:18 2008 -0500
+
+ FSL DDR: Convert MPC8540ADS to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 21:34:55 2008 -0500
+
+ FSL DDR: Add 85xx specific register setting
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fb1b7346849ccd0c20306143e334f5b76143070
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jun 9 11:07:46 2008 -0500
+
+ FSL DDR: Add e500 TLB helper for DDR code
+
+ Provide a helper function that board code can call to map TLBs when
+ setting up DDR.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d26b739afe5a6760bd345743188759cd9d0f3b47
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Tue Aug 26 17:03:38 2008 -0500
+
+ dm9000 remove dead external phy support, gpio fix
+
+ dm9000 has code to detect and initialize external phy parts, but later
+ on in the code the part is forced to use the internal phy
+ unconditionally. Remove the unused/untested code.
+
+ change the GPIO initialization so that only the GPIO used as an
+ internal phy reset (hardwired in the chip) is set as an output. The
+ remaining GPIO need to be handled by board specific code to prevent
+ possible drive conflicts. Set as inputs for safety.
+
+ replace a few magic numbers with defines
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 26 11:17:48 2008 -0500
+
+ Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
+
+ cmd_net.c command descriptions were updated to describe the optional
+ hostIPaddr argument. The dhcp command help message was also updated
+ to more closely reflect the other commands in cmd_net.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:30:28 2008 +0200
+
+ Fix bogus error message in the DHCP handler
+
+ The DHCP handler has 1 state that is not listed in this case, causing a
+ failure message when there is actually no failure.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:30:27 2008 +0200
+
+ Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
+
+ The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
+ missing extern inside the net/bootp.h header
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1803f7f91ff35ca402259065df7557107dcf28a2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 21:26:32 2008 +0000
+
+ ColdFire: Add FEC Buffer descriptors in SRAM
+
+ Add FEC Buffer descriptors and data buffer in SRAM for
+ faster execution and access.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 429be27ce195210d4b9decf9e867b9ca6155a87d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 21 23:55:11 2008 +0000
+
+ Fix ColdFire FEC warning messages
+
+ Types mismatch and implicit declaration of icache_invalid()
+ warning messages
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6a002171098e968bd5b362347d2831224fab6048
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 12 00:17:50 2008 -0700
+
+ Moved initialization of SKGE Ethernet driver to board code.
+
+ The only board using this driver is the SL8245 board.
+ Removed initialization for the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 12 00:08:45 2008 -0700
+
+ Moved conditional compilation to Makefile for SK98 Ethernet driver
+
+ Brute-force removal of #ifdefs. Didn't touch the code.
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 65d3d99c28dc363d15eaee78225ff643df499b97
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 11 23:42:19 2008 -0700
+
+ Moved initialization of ULI526X Ethernet driver to board code.
+
+ The only board using this driver is the Freescale MPC8610HPCD board.
+ Removed initialization for the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 11 23:15:28 2008 -0700
+
+ Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
+
+ Added board_eth_init() function to bf537-stamp board.
+ Removed initialization for the Blackin EMAC driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fc363ce35408f348cacced68505f3747a53e3d7c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Jul 9 01:04:19 2008 -0700
+
+ Moved initialization of GRETH Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to leon2/leon3 CPU directories and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 26 22:16:25 2008 -0700
+
+ Moved initialization of MCFFEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to coldfire CPU directories and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 26 22:12:36 2008 -0700
+
+ Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:38 2008 -0500
+
+ FSL DDR: Remove old SPD support from cpu/mpc86xx
+
+ All 86xx boards have been converted to the new code so we can
+ remove the old SPD DDR setup code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9bd4e5911b750837515466bc7449087698b88e0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:37 2008 -0500
+
+ FSL DDR: Convert SBC8641D to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 26 15:01:36 2008 -0500
+
+ FSL DDR: Convert MPC8610HPCD to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:35 2008 -0500
+
+ FSL DDR: Convert MPC8641HPCN to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:34 2008 -0500
+
+ FSL DDR: Add 86xx specific register setting
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 233fdd502a6c227f476212b3097653ad48d7e254
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:32 2008 -0500
+
+ FSL DDR: Add DDR2 DIMM paramter support
+
+ Compute DIMM parameters based upon the SPD information.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 05c05a2363a6ac11e0e405926034546ffad71fad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:30 2008 -0500
+
+ FSL DDR: Add DDR1 DIMM paramter support
+
+ Compute DIMM parameters based upon the SPD information in spd.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:29 2008 -0500
+
+ FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
+
+ The main purpose of this rewrite it to be able to share the same
+ initialization code on all FSL PowerPC products that have DDR
+ controllers. (83xx, 85xx, 86xx).
+
+ The code is broken up into the following steps:
+ GET_SPD
+ COMPUTE_DIMM_PARMS
+ COMPUTE_COMMON_PARMS
+ GATHER_OPTS
+ ASSIGN_ADDRESSES
+ COMPUTE_REGS
+ PROGRAM_REGS
+
+ This allows us to share more code an easily allow for board specific code
+ overrides.
+
+ Additionally this code base adds support for >4G of DDR and provides a
+ foundation for supporting interleaving on processors with more than one
+ controller.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f784e32b4bce0013983506b11af4b85b8ca3d36e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:28 2008 -0500
+
+ FSL DDR: Provide a generic set_ddr_laws()
+
+ Provide a helper function that will setup the last available
+ LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
+Author: James Yang <James.Yang@freescale.com>
+Date: Tue Aug 26 15:01:27 2008 -0500
+
+ Add proper SPD definitions for DDR1/2/3
+
+ Also adds helper functions for DDR1/2 to verify the checksum.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 285db74716c724ae8a0ff177878fd09a74428c7b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 27 01:02:48 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 19 10:08:49 2008 +0200
+
+ Add support for muas3001 board (MPC8270)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 322098bff32410d2a00031649b47c4ec90a66d9a
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Tue Aug 19 08:31:18 2008 +0530
+
+ common/cmd_load.c cleanup - remove unused variables
+
+ - Remove unused global variable os_data_count.
+ - Remove unused variable z.
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 306620b762a4f9fa6678568ad2e8772dec145208
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 18 13:35:27 2008 +0200
+
+ remove MVS1 board
+
+ MVS1 board has reached end-of-life and can be removed completely.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:45 2008 -0500
+
+ bootm: refactor do_reset and os boot function args
+
+ There is no need for each OS specific function to call do_reset() we
+ can just do it once in bootm. This means its feasible on an error for
+ the OS boot function to return.
+
+ Also, remove passing in cmd_tbl_t as its not needed by the OS boot
+ functions. flag isn't currently used but might be in the future so
+ we left it alone.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 40afac22a9c602e55c501c800f1c064324711b56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:44 2008 -0500
+
+ fdt: Added resize command
+
+ Resize the fdt to size + padding to 4k boundary
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:43 2008 -0500
+
+ fdt: refactor initrd related code
+
+ Created a new fdt_initrd() to deal with setting the initrd properties
+ in the device tree and fixing up the mem reserve. We can use this
+ both in the choosen node handling and lets us remove some duplicated
+ code when we fixup the initrd info in bootm on PPC.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:42 2008 -0500
+
+ fdt: refactor fdt resize code
+
+ Move the fdt resizing code out of ppc specific boot code and into
+ common fdt support code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:41 2008 -0500
+
+ bootm: refactor image detection and os load steps
+
+ Created a bootm_start() that handles the parsing and detection of all
+ the images that will be used by the bootm command (OS, ramdisk, fdt).
+ As part of this we now tract all the relevant image offsets in the
+ bootm_headers_t struct. This will allow us to have all the needed
+ state for future sub-commands and lets us reduce a bit of arch
+ specific code on SPARC.
+
+ Created a bootm_load_os() that deals with decompression and loading
+ the OS image.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:40 2008 -0500
+
+ bootm: move lmb into the bootm_headers_t structure
+
+ To allow for persistent state between future bootm subcommands we
+ need the lmb to exist in a global state.
+ Moving it into the bootm_headers_t allows us to do that.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54f9c86691309b2f919f567f9255b8bcad2c7651
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:39 2008 -0500
+
+ bootm: Set working fdt address as part of the bootm flow
+
+ Set the fdt working address so "fdt FOO" commands can be used as part
+ of the bootm flow. Also set an the environment variable "fdtaddr"
+ with the value.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 06a09918f3903450313e2047a9cc258bf5872f46
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:38 2008 -0500
+
+ bootm: refactor fdt locating and relocation code
+
+ Move the code that handles finding a device tree blob and relocating
+ it (if needed) into common code so all arch's have access to it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:37 2008 -0500
+
+ bootm: refactor ramdisk locating code
+
+ Move determing if we have a ramdisk and where its located into the
+ common code. Keep track of the ramdisk start and end in the
+ bootm_headers_t image struct.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c160a9544743e80e8889edb2275538e7764ce334
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:36 2008 -0500
+
+ bootm: refactor entry point code
+
+ Move entry point code out of each arch and into common code.
+ Keep the entry point in the bootm_headers_t images struct.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20220d22b9f41446288588cd2e457e0077a18bed
+Author: Randy Vinson <rvinson@mvista.com>
+Date: Wed Aug 13 11:44:57 2008 -0700
+
+ mpc7448hpc2: Fix PCI I/O space mapping.
+
+ PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
+ PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
+ space such that 0xFA000000 in the processor's address space maps to 0
+ on the PCI I/O bus.
+
+ Signed-off-by Randy Vinson <rvinson@mvista.com>
+ Acked-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Aug 13 18:10:26 2008 +0200
+
+ i.MX31: Specify maintainers for i.MX31-based boards
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 26 15:01:28 2008 +0200
+
+ ADS5121: adjust image addresses in RAM and flash
+
+ Use the same mapping in flash as used by Linux
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19f101412c16edee9fd55db4039e1d68a833b28b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 26 13:14:34 2008 +0200
+
+ cmd_mem.c: Fix help message alignment
+
+ Bug was introced by "Big white-space cleanup" (53677ef1)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Aug 20 11:11:52 2008 +0200
+
+ change mvBL-M7 default env and move to vendor subdir
+
+ fix mvBL-M7 config and move to matrix_vision subdir
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Fri Aug 22 23:52:40 2008 -0700
+
+ MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
+
+ This patch adds elements to the 83xx sysconf structure and #define values that are used
+ by mpc83xx family devices.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:15 2008 -0700
+
+ MPC8349EMDS: Add PCI Agent (PCISLAVE) support
+
+ Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
+ PCI card rather than a host computer.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4ff9aea9d6b5602683a920951ef896996438af62
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:14 2008 -0700
+
+ mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
+
+ This adds a helper function to unlock the PCI configuration bit, so that
+ any extra PCI setup (such as outbound windows, etc.) can be done after
+ using the 83XX_GENERIC_PCI code to set up the PCI bus.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162338e1fcde231ca4d562e5ebd7859456731691
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:13 2008 -0700
+
+ MPC8349EMDS: use 83XX_GENERIC_PCI setup code
+
+ Change the MPC8349EMDS board to use the generic PCI initialization code
+ for the mpc83xx cpu.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 25 14:53:09 2008 -0500
+
+ fix out of tree building
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a49d10cf027d059ee15c262010a05cdaec0961e1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 25 23:45:41 2008 +0200
+
+ Minor coding style cleanup, updte CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 20 20:29:38 2008 +0200
+
+ RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
+
+ This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
+ to combine both config options into one line. This even allows defining
+ both options and not generating the target object twice.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079edb913dbae147b50a488cf02e03f473fc5f28
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Fri Jul 4 16:50:05 2008 +0200
+
+ MX31: fix bit masks in function mx31_decode_pll()
+
+ Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+
+commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Mon Aug 25 11:11:34 2008 +0200
+
+ Correct ARM Versatile Timer Initialization
+
+ - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
+ -- Timer Value Register @ TIMER Base + 4 is Read-only.
+ -- Prescale Value (Bits 3-2 of TIMER Control register)
+ can only be one of 00,01,10. 11 is undefined.
+ -- CFG_HZ for Versatile board is set to
+ #define CFG_HZ (1000000 / 256)
+ So Prescale bits is set to indicate
+ - 8 Stages of Prescale, Clock divided by 256
+ - The Timer Control Register has one Undefined/Shouldn't Use Bit
+ So we should do read/modify/write Operation
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Mon Aug 25 11:30:29 2008 +0200
+
+ Add ARM AMBA PL031 RTC Support
+
+ Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+
+commit e39411674669cc880e1ec4a8ca4794fb15c33a45
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Aug 19 16:21:03 2008 -0400
+
+ ARM DaVinci: Removed redundant NAND initialization code.
+
+ ARM DaVinci: Removed redundant NAND initialization code.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit b3fb663b20d995ca41327db877ddb168279b3f62
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Aug 19 16:21:00 2008 -0400
+
+ ARM DaVinci: Fix compilation error with new MTD code.
+
+ ARM DaVinci: Fix compilation error with new MTD code.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Aug 22 14:37:05 2008 -0400
+
+ Add note on dereferencing /aliases pointers
+
+ Replace the "must quote special characters" note with a hint on
+ how to dereference /aliases pointers by omitting the leading "/".
+ This feature was introduced by Kumar Gala as a libfdt enhancement
+ in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
+
+ Example:
+
+ => fdt print /aliases
+ aliases {
+ ethernet0 = "/qe@e0100000/ucc@2000";
+ ethernet1 = "/qe@e0100000/ucc@3000";
+ serial0 = "/soc8360@e0000000/serial@4500";
+ serial1 = "/soc8360@e0000000/serial@4600";
+ pci0 = "/pci@e0008500";
+ };
+ => fdt print ethernet0
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <0x1>;
+ reg = <0x2000 0x200>;
+ interrupts = <0x20>;
+ interrupt-parent = <0x2>;
+ local-mac-address = [00 00 00 00 00 00];
+ rx-clock-name = "none";
+ tx-clock-name = "clk9";
+ phy-handle = <0x3>;
+ phy-connection-type = "rgmii-id";
+ pio-handle = <0x4>;
+ };
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit feeca3f578b7f53c032ba203698751c982f8bf5a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 14 08:28:19 2008 -0500
+
+ libfdt: Add support for using aliases in fdt_path_offset()
+
+ If the path doesn't start with '/' check to see if it matches some alias
+ under "/aliases" and substitute the matching alias value in the path
+ and retry the lookup.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 6 14:50:49 2008 +1000
+
+ libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
+
+ As well as fdt_subnode_offset(), libfdt includes an
+ fdt_subnode_offset_namelen() function that takes the subnode name to
+ look up not as a NUL-terminated string, but as a string with an
+ explicit length. This can be useful when the caller has the name as
+ part of a longer string, such as a full path.
+
+ However, we don't have corresponding 'namelen' versions for
+ fdt_get_property() and fdt_getprop(). There are less obvious use
+ cases for these variants on property names, but there are
+ circumstances where they can be useful e.g. looking up property names
+ which need to be parsed from a longer string buffer such as user input
+ or a configuration file, or looking up an alias in a path with
+ IEEE1275 style aliases.
+
+ So, since it's very easy to implement such variants, this patch does
+ so. The original NUL-terminated variants are, of course, implemented
+ in terms of the namelen versions.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit f171746f701ea58bf6a53e835b53d2aaebee0d81
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Jul 29 14:51:22 2008 +1000
+
+ libfdt: Forgot one function when cleaning the namespace
+
+ In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
+ libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
+ chance of collisions with things from whatever package libfdt is
+ embedded in, pulled into the libfdt build via that environment's
+ libfdt_env.h.
+
+ Except... I missed one. This patch applies the same treatment to
+ _stringlist_contains(). While we're at it, also make it static since
+ it's only used in the same file.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 46390da15411351fc3b498bd8c1615f78fe80df0
+Author: Wolfram Sang <w.sang@pengutronix.de>
+Date: Wed Jul 9 11:22:44 2008 +0200
+
+ libfdt: Improve documentation in libfdt.h
+
+ Fix a few typos and mistakes.
+
+ Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Jul 9 14:10:24 2008 +1000
+
+ libfdt: Increase namespace-pollution paranoia
+
+ libfdt is supposed to easy to embed in projects all and sundry.
+ Often, it won't be practical to separate the embedded libfdt's
+ namespace from that of the surrounding project. Which means there can
+ be namespace conflicts between even libfdt's internal/static functions
+ and functions or macros coming from the surrounding project's headers
+ via libfdt_env.h.
+
+ This patch, therefore, renames a bunch of libfdt internal functions
+ and macros and makes a few other chances to reduce the chances of
+ namespace collisions with embedding projects. Specifically:
+ - Internal functions (even static ones) are now named _fdt_*()
+
+ - The type and (static) global for the error table in
+ fdt_strerror() gain an fdt_ prefix
+
+ - The unused macro PALIGN is removed
+
+ - The memeq and streq macros are removed and open-coded in the
+ users (they were only used once each)
+
+ - Other macros gain an FDT_ prefix
+
+ - To save some of the bulk from the previous change, an
+ FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
+ FDT_ALIGN(x, FDT_TAGSIZE)
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit c66830263af19831f2b7db307f79d1943febf7f9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Jul 7 10:14:15 2008 +1000
+
+ dtc: Enable and fix -Wcast-qual warnings
+
+ Enabling -Wcast-qual warnings in dtc shows up a number of places where
+ we are incorrectly discarding a const qualification. There are also
+ some places where we are intentionally discarding the 'const', and we
+ need an ugly cast through uintptr_t to suppress the warning. However,
+ most of these are pretty well isolated with the *_w() functions. So
+ in the interests of maximum safety with const qualifications, this
+ patch enables the warnings and fixes the existing complaints.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Jul 7 10:10:48 2008 +1000
+
+ dtc: Enable and fix -Wpointer-arith warnings
+
+ This patch turns on the -Wpointer-arith option in the dtc Makefile,
+ and fixes the resulting warnings due to using (void *) in pointer
+ arithmetic. While convenient, pointer arithmetic on void * is not
+ portable, so it's better that we avoid it, particularly in libfdt.
+
+ Also add necessary definition of uintptr_t needed by David Gibson's
+ changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
+ comes from stdint.h, which u-boot doesn't have). -- gvb
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
+Author: Tirumala R Marri <tmarri@amcc.com>
+Date: Thu Aug 21 21:54:53 2008 -0700
+
+ ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
+
+ During recent PCI-E tests it has been found that current
+ driverl level and de-emphasis values are not set correctly.
+ After sweeping throgh all de-ephasis values, it was found that
+ 0x130 is a right value. Where 0x13 is driver level and 0 is
+ de-emphasis.
+
+ Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 20:46:56 2008 +0200
+
+ Make the YAFFS filesystem work
+
+ Recently the YAFFS filesystem support has been added to U-boot.
+ However, just enabling CONFIG_YAFFS2 is not enough to get it working.
+
+ ymount will generate an exception (when dereferencing mtd->readoob()), because
+ the genericDevice is a null pointer. Further, a lot of logging is produced
+ while using YAFFS fs, so logging should also be disabled.
+ Both issues are solved by this patch.
+
+ With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
+ in U-boot, as well as in Linux.
+
+ Tested on a Atmel AT91SAM9261EK board.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Acked-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Aug 19 08:42:53 2008 +0900
+
+ Fix OneNAND read_oob/write_oob functions compatability
+
+ Also sync with kernel OneNAND codes
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8d765456c1d33f2010d2717ee58de7647fdc6346
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Aug 18 17:11:20 2008 -0500
+
+ NAND: Remove delay from nand_boot_fsl_elbc.c.
+
+ It was for debugging purposes, and shouldn't have been left in.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f556483734126793522fb7a8cf36af90da78f084
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 21 11:05:03 2008 +0200
+
+ ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
+
+ This patch fixes some minor issues introduced with the patch:
+ ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
+
+ - Rework memory-queue and PLB arbiter optimization code, that the
+ local variable is not needed anymore. This removes one #ifdef.
+ - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
+ of XXX+ 0x01). This was not introduced by Prodyut, just a
+ copy-paste problem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079589bcfb24ba11068460276a3cc9549ab5346f
+Author: Prodyut Hazarika <phazarika@amcc.com>
+Date: Wed Aug 20 09:38:51 2008 -0700
+
+ ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
+ PPC405EX and PPC460EX/GT/SX
+
+ - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
+ processors
+ - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
+ across processors (405 and 440/460)
+ - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
+ processors
+ - Add register bit definitions for Memory Queue Configuration registers
+
+ Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ba37aa03287c5483c61c0a3e320c8888bee0143a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:41:18 2008 -0500
+
+ fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
+
+ Move to using the environment variables 'ethaddr', 'eth1addr', etc..
+ instead of bd->bi_enetaddr, bi_enet1addr, etc.
+
+ This makes the code a bit more flexible to the number of ethernet
+ interfaces.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4cacf7c64609839f809e2f9c45873f1d65861703
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 19 14:57:55 2008 +0200
+
+ hush: Fix printf debug macro in hush.c so that it usable in U-Boot
+
+ This patch changes the debug_printf() marco for U-Boot in hush.c and
+ moves the definition of DEBUG_SHELL to a place that is actually compiled
+ under U-Boot.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 19 09:57:41 2008 +0200
+
+ cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Commit 00b1883a4cac59d97cd297b1a3a398db85982865
+ missed a few boards:
+ include/configs/M5253DEMO.h
+ include/configs/ml507.h
+ include/configs/redwood.h
+
+ This patch fixes this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0768b7a872964085eece8d5e9fec9175e9deb161
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Aug 18 13:41:27 2008 +0200
+
+ Consolidate strmhz() implementation
+
+ ARM, i386, m68k and ppc all have identical implementations of strmhz().
+ Other architectures don't provide this function at all.
+
+ This patch moves strmhz() into lib_generic, reducing code duplication
+ and providing a more unified API across architectures.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a928d0df211f1d829308d335d19be3ca42558dfc
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 18 12:02:51 2008 +0200
+
+ fix mvbc_p board build warnings
+
+ fix build warnings @ mvBC-P board by using correct types, i.e. change
+ out_be32 to out_be16 and out_8 accordingly.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 16 18:54:27 2008 +0200
+
+ Makefile: fix posix support on find
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bef92e215d945cc574399c1a1b00a3a76d35aa03
+Author: Axel Beierlein <belatronix@web.de>
+Date: Sat Aug 16 00:30:48 2008 +0200
+
+ Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
+
+ Tested with TQM5200S on STK52XX.200 Board
+
+ Signed-off-by: Axel Beierlein <belatronix@web.de>
+
+commit 0800707b6d5041a840a65d556032c15c584b55f8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 15 14:36:32 2008 -0500
+
+ mod_i2c_mem() bugfix
+
+ The last used chip, address, and address length were not being
+ stored for the imm and imn commands.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4afbef967275b2f636abae86f91b81becee7ad03
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:37:31 2008 -0400
+
+ Fix typo in spelling of ATAPI.
+
+ Correct a small spelling mistake.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 36c2d3062ecc6ab85f8e237180eb134464c48418
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:34:10 2008 -0400
+
+ Add a hook to allow board-specific PIO mode setting.
+
+ This patch adds a hook whereby a board-specific routine can be called to
+ configure hardware for a PIO mode. The prototype for the board-specific
+ routine is:
+
+ int inline ide_set_piomode(int pio_mode)
+
+ ide_set_piomode should be prepared to configure hardware for a pio_mode
+ between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:29:12 2008 -0400
+
+ Replace enums in ata.h with an include of libata.h
+
+ This patch removes some enums from ata.h and replaces them with an
+ include of libata.h. This way, we eliminate duplicated code, and
+ prevent errors whereby the different versions could be out of sync.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 0de0afbca865ecf482b4d2b635236746def8518f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 15 18:32:41 2008 +0200
+
+ coldfire: fix CFI drivers activation with new macro
+
+ rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:35 2008 -0500
+
+ fdt: fdt addr w/o any args reports back the current working address
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f953d99fd528a496b400a706b511eaf8e3ea66af
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:34 2008 -0500
+
+ fdt: added the ability to set initrd start/end via chosen command
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ffa4bafacaef67058463b3d7d0099ced57569dd2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:33 2008 -0500
+
+ Add command to enable/disable interrupts
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Tue Aug 19 22:21:16 2008 -0700
+
+ CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
+
+ This patch fixes a missing vendor code in the flash_real_protect() function.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 16:53:39 2008 +0000
+
+ CFI: Fix AMD Legacy sector protect
+
+ New implement sector lock and unlock or softlock commands
+ do not exist in AMD legacy flash. Thus, causing issue
+ when erasing AMD legacy flash (such as lv040)
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 492671404140f09d5b21b3d2ce4e362c0692c069
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:40:16 2008 +0200
+
+ hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
+
+ CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 33eac2b3d946fc998a09245dfe54d017079b9056
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:28:36 2008 +0200
+
+ hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 25da0b84195fdda89a943b2d25757db5afeef5b8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:27:37 2008 +0200
+
+ favr-32-ezkit: Fix printf format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 15 12:04:25 2008 +0200
+
+ MAINTAINERS: Sort avr32 section alphabetically
+
+ The rest of the MAINTAINERS file appears to be sorted
+ almost-alphabetically, but entries for the newly added AVR32 boards were
+ added somewhat randomly. This patch sorts the list alphabetically again.
+
+ Also update my e-mail address. The old one still works, but it may not
+ work forever.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 13b50fe3bc065c48911fa373231421280855a9d6
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Wed Jul 30 13:07:27 2008 +0100
+
+ avr32: Add MIMC200 board
+
+ The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
+ 8MByte FLASH and 128KByte FRAM.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jul 9 21:07:34 2008 +0900
+
+ rtl8169: add support for RTL8110SCL
+
+ This patch fixes a problem that RTL8110SCL started transfer
+ with an incorrect memory address.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 25 15:48:52 2008 -0500
+
+ Fix dm9000 receive status and len little endian issue
+
+ The received status and len was in little endian
+ format and caused the ethernet unable to proceed
+ further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fcd69a1a57fb2af4d26201422095a4be9f36963e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:32 2008 -0500
+
+ Clean up usage of icache_disable/dcache_disable
+
+ There is no point in disabling the icache on 7xx/74xx/86xx parts and not
+ also flushing the icache. All callers of invalidate_l1_instruction_cache()
+ call icache_disable() right after. Make it so icache_disable() calls
+ invalidate_l1_instruction_cache() for us.
+
+ Also, dcache_disable() already calls dcache_flush() so there is no point
+ in the explicit calls of dcache_flush().
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:31 2008 -0500
+
+ Update linux bootm to support ePAPR client interface
+
+ The ePAPR spec has some subtle differences from the current device
+ tree based boot interface to the powerpc linux kernel. The powerpc
+ linux kernel currently ignores the differences that ePAPR specifies.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b734e5556a239b3be5f9693b2f4b4b739683ec16
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 18 23:50:20 2008 +0200
+
+ Minor code cleanup: keep lists sorted.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d0039d4ed275e6ca09fb417895024ad02be118c4
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 23 19:10:14 2008 +0200
+
+ Add support for ADT7460 I2C monitor chip
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:45 2008 +0200
+
+ video: Clean drivers/video/Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 871c18dd301752270e1f74328c846c3104be1e2e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:37 2008 +0200
+
+ rtc: Clean drivers/rtc/Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:35 2008 +0200
+
+ i2c: Clean drivers/i2c/ Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Jul 9 22:30:30 2008 +0800
+
+ Add 'license' command to U-Boot command line
+
+ The 'license' command includes the U-Boot license (GPLv2) into the
+ actual bootloader binary. The license text can be shown interactively
+ at the U-Boot commandline.
+
+ For products where the commandline can actually be accessed by the
+ end user, this helps to prevent inadvertent GPL violations, since the
+ GPLv2 license text can no longer be 'forgotten' to be included into
+ the product.
+
+ The 'license' command can be enabled by CONFIG_CMD_LICENSE.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit fe2ce5500ebf43d79d227190bd2370232d5b113d
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Sun Jul 6 15:56:38 2008 +0800
+
+ add 'unzip' command to u-boot commandline
+
+ [PATCH] add new 'unzip' command to u-boot commandline
+
+ common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
+ memory to memory, and option CONFIG_CMD_UNZIP to enable it
+
+ Signed-off-by: Werner Almesberger <werner@openmoko.org>
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 07efc9e321619c3dec213310c32e011aa6f02783
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 19:37:17 2008 -0500
+
+ Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
+
+ The CFG_ENV_SIZE is not suitable used for SPI flash erase
+ sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
+ Add condition check if CFG_ENV_SIZE is larger than
+ CFG_ENV_SECT_SIZE, calculate the right number of sectors for
+ erasing.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:54:25 2008 +0000
+
+ ColdFire: Multiple fixes for M5282EVB
+
+ Incorrect CFG_HZ value, change 1000000 to 1000.
+ Rename #waring to #warning. RAMBAR1 uses twice
+ in start.S, rename the later to FLASHBAR. Insert
+ nop for DRAM setup. And, env_offset in linker file.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:26:43 2008 +0000
+
+ ColdFire: Move m5282evb from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:25:07 2008 +0000
+
+ ColdFire: Move m5272c3 from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 659e9bad629a480f606b286d5703aef7159edf98
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:23:16 2008 +0000
+
+ ColdFire: Move m5271evb from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 05316f8ece8206339a208ec052f039cd0f7ca922
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 13:41:49 2008 +0000
+
+ ColdFire: Add M54451EVB platform support for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 19:14:08 2008 -0500
+
+ ColdFire: Add Serial Flash support for M54455EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 9f751551456828b2d0ff417f10959fb0c7110bd0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 20:38:53 2008 -0500
+
+ ColdFire: Implement SBF feature for M5445EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a7323bba229203aae2604afde131ab47bad4eadc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:53:36 2008 -0500
+
+ ColdFire: Add SSPI feature for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b2d022d1ac3f59bffa9cec249341e77aea168abc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:37:10 2008 -0500
+
+ ColdFire: Use CFI Flash driver for M54455EVB
+
+ Remove non-common flash driver in
+ board/freescale/m54455evb/flash.c. The non-cfi flash will
+ use CONFIG_FLASH_CFI_LEGACY to configure the flash
+ attribute.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:11:47 2008 -0500
+
+ ColdFire: Add M5253DEMO platform support for MCF5253
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 80ba61fd82569af40e04d4a089257b81881884f2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 14:17:09 2008 -0500
+
+ ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d361307e73ce1f6fc68760123f37d4876f851f3e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 14:11:36 2008 -0500
+
+ ColdFire: Fix M5253EVB dram bring up issue
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4b0708093e15b412296328bf81325cf9b69fe512
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 14 14:41:06 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
Author: Scott Wood <scottwood@freescale.com>
Date: Wed Aug 13 18:24:05 2008 -0500
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
+Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+Date: Wed Aug 6 14:42:13 2008 +0200
+
+ avr32: add support for EarthLCD Favr-32 board
+
+ This patch adds support for the Favr-32 board made by EarthLCD.
+
+ This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
+ has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
+ Ethernet, audio out, USB device, SD-card slot, USART and various other
+ connectors for cennecting stuff to SPI, I2C, GPIO, etc.
+
+ Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit bc9019e19758a19a388fb20ef18dc771cd39fdda
+Author: Rafael Campos <rafael.campos@hanscan.com>
+Date: Thu Jul 31 10:22:20 2008 +0200
+
+ cfi-flash: Added support to flash_real_protect for Atmel flash devices
+
+ Some of the flash memories produced by ATMEL start in read-only mode.
+ We need to unprotect it. This patch allows the AT49BV6416 to work with
+ cfi_flash memories. Tested in the at91rm9200ek board.
+
+ Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Aug 5 15:36:39 2008 +0200
+
+ cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
Author: Stefan Roese <sr@denx.de>
Date: Wed Aug 6 14:06:03 2008 +0200
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
+Author: Julien May <mailinglist@miromico.ch>
+Date: Mon Jun 23 13:57:52 2008 +0200
+
+ Add support for the hammerhead (AVR32) board
+
+ The Hammerhead platform is built around a AVR32 32-bit microcontroller
+ from Atmel. It offers versatile peripherals, such as ethernet, usb
+ device, usb host etc.
+
+ The board also incooperates a power supply and is a Power over Ethernet
+ (PoE) Powered Device (PD).
+
+ Additonally, a Cyclone III FPGA from Altera is integrated on the board.
+ The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
+ DDR2 SDRAM interfaces, which will cover even the most exceptional need
+ of memory bandwidth. Together with the onboard video decoder the board
+ is ready for video processing.
+
+ For more information see: http:///www.miromico.com/hammerhead
+
+ Signed-off-by: Julien May <mailinglist@miromico.ch>
+ [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
Author: Kumar Gala <galak@kernel.crashing.org>
Date: Tue Jul 29 12:23:49 2008 -0500
Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 5 00:08:48 2008 -0700
+
+ Moved initialization of AVR32 Ethernet controllers to board_eth_init()
+
+ Renamed initialization functions for atngw100 and atstk1000.
+ Removed initializations for these boards from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Wed Jul 23 10:55:46 2008 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 021f6df6e96af5b387810cf96d24848da1faa55c
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jul 10 17:20:51 2008 +0400
+
+ 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
+
+ The thinko was quite silly indeed, I messed with !ptr. Normally this
+ would trigger some fault, but in U-Boot NULL pointer is equal to phys
+ 0, so the code was working still, just didn't actually test mpc8315erdb
+ environment variable value. Heh.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Jul 8 21:00:04 2008 +0400
+
+ 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
+
+ Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
+ support, or without TSEC1 but with USB ULPI PHY support in addition.
+ With this patch user can specify desired USB PHY.
+
+ Also, it seems that we can't distinguish the two boards in software, so
+ user have to set `mpc8315erdb' environment variable to either 'tsec1'
+ (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
+ Linux will not probe for TSEC1.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Jul 8 20:59:43 2008 +0400
+
+ fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
+
+ Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
+ MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
+ (connected to the four-ports hub, usb host only).
+
+ This patch implements support for passing Dual-Role USB controller's
+ device tree property phy_type through the usb_phy_type environment
+ variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
commit 699f05125509249072a0b865c8d35520d97cd501
Author: Wolfgang Denk <wd@denx.de>
Date: Tue Jul 15 22:22:44 2008 +0200