+commit f7a35a60cf45491871a5c28e9ad24db005487857
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c2537ee85954af9d036b18b644f3e18d837bf4a5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
+Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
+Date: Thu Oct 16 13:38:00 2008 -0500
+
+ 83xx NAND boot: wait for LTESR[CC]
+
+ At least some revisions of the 8313, and possibly other chips, do not
+ wait for all pages of the initial 4K NAND region to be loaded before
+ beginning execution; thus, we wait for it before branching out of the
+ first NAND page.
+
+ This fixes warm reset problems when booting from NAND on 8313erdb.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf29e0ea0af03d593c64614136acc723a7a022a2
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Oct 17 12:54:18 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:50 2008 -0500
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
+ bit 26, instead it should be bit 28. This caused in incorrect
+ interpretation of the i2c_clk which is the same as the SEC clk on
+ MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
+ in PORDEVSR2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:49 2008 -0500
+
+ Revert "85xx: Using proper I2C source clock divider for MPC8544"
+
+ This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
+
+ The fix introduced by this patch is not correct. The problem is
+ that the documentation is not correct for the MPC8544 with regards
+ to which bit in PORDEVSR2 is for the SEC_CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2179c4766bffeece98e5e92040629a96c97e230c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 15 10:19:41 2008 -0500
+
+ 85xx: Fix compile warning
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:614: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Oct 15 10:40:24 2008 +0800
+
+ Fix the function conflict in x86emu when DEBUG is on
+
+ The function parse_line() in common/main.c was exposed globally by commit
+ 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
+ name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
+ This patch fix this by renaming the function in the debug.c file.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4dbacf69a669a17487054552fc2761149dd6767
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 15 15:50:45 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 374b9038293d01d8744a46af9b7854a6fd99b228
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:51:19 2008 +0200
+
+ Fix compiler warning in lib_ppc/board.c
+
+ Fix compiler warning introduced by commit 0f8cbc18
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9724555755a6f1066636481b41f7094e0ce93a69
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 9 10:29:14 2008 +0530
+
+ mpc83xx: wait till UPM completes the write to array
+
+ Reference manual states that MxMR[MAD] increment is the indication
+ of write to UPM array is complete. Honour that. Also, make the dummy
+ write explicit.
+
+ also fix the comment.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Wed Oct 8 18:12:20 2008 -0500
+
+ Remove unwanted ';' at end of define.
+
+ Currently this is not creating any problem. But it will result
+ in compilation error when used as below.
+
+ printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+
+ continuation of the theme based on git grep "^#define CFG_.*;$" include/
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b2934a56650e9a6c54432f9ce6dc36757967385e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Mon Oct 6 10:53:59 2008 -0400
+
+ ARM DaVinci: Add maintainer information for SFFSDR board.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sat Oct 4 19:26:16 2008 +0200
+
+ api: fix type mismatch
+
+ This patch fixes a type mismatch and thus removes a compiler
+ warning when compiling with CONFIG_API on powerpc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 1 12:25:04 2008 -0500
+
+ cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
+
+ Original code displayed:
+ => help i2c
+ i2c i2c speed [speed] - show or set I2C bus speed
+ i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 14 22:13:41 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 10 11:41:01 2008 +0800
+
+ Do not init SATA when disabled on 8536DS.
+
+ SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
+ driver still try to access the SATA registers, the cpu will hangup.
+ This patch try to fix this by reading the serdes status before the SATA
+ initialize.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
+Author: Nikita V. Youshchenko <yoush@cs.msu.su>
+Date: Fri Oct 3 00:03:55 2008 +0400
+
+ fsl_diu: fix alignment error that caused malloc corruption
+
+ When aligning malloc()ed screen_base, invalid offset was added.
+ This not only caused misaligned result (which did not cause hardware
+ misbehaviour), but - worse - caused screen_base + smem_len to
+ be out of malloc()ed space, which in turn caused breakage of
+ futher malloc()/free() operation.
+
+ This patch fixes screen_base alignment.
+
+ Also this patch makes memset() that cleans framebuffer to be executed
+ on first initialization of diu, not only on re-initialization. It looks
+ correct to clean the framebuffer instead of displaying random garbage;
+ I believe that was disabled only because that memset caused breakage
+ of malloc/free described above - which no longer happens with the fix
+ described above.
+
+ Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
+
+commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 24 10:29:37 2008 +0200
+
+ api: Fix building with CONFIG_API
+
+ This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
+
+ USB_MAX_STOR_DEV is defined in include/usb.h, but
+ needed in api/api_storage.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:39:40 2008 -0500
+
+ Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 81e612014c40c922ec35488d17c504d4e9286f06
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:38:42 2008 -0500
+
+ Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
+
+ The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
+ CFG_EEPROM_PAGE_WRITE_BITS in various temperature
+ sensor drivers are not necessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:04:38 2008 -0400
+
+ cmd_spi: remove broken signed casting for display
+
+ Since we're working with unsigned data, you can't apply a signed pointer
+ cast and then attempt to print the result. Otherwise you get wrong output
+ when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:05:24 2008 -0400
+
+ strings cmd: drop old CONFIG_CFG_STRINGS define
+
+ We don't need CONFIG_CFG_STRINGS anymore now that we have the define
+ CONFIG_CMD_STRINGS and Makefile control.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fecb5ade3b37f62981f2b05b621005850173aaa9
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Sep 19 17:32:49 2008 +0800
+
+ Fix the NAND size overflow issue.
+
+ When the total size of all NAND devices exceeds 4 GiB, the size will
+ overflow. This patch tries to fix this.
+
+ Note that we still have a problem when a single NAND device is bigger
+ than 4 GiB: then the overflow would actually happen earlier, i. e.
+ when storing the size in nand_info[].size, as nand_info[].size is an
+ "u_int32_t".
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f574717277238b9014b8136c90eea77196490f
+Author: Louis Su <louis@asix.com.tw>
+Date: Wed Jul 9 11:01:37 2008 +0800
+
+ AX88180: new gigabit network driver
+
+ Signed-off-by: Louis Su <louis@asix.com.tw>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Aug 19 16:07:03 2008 +0200
+
+ enable 10/100M at VSC8601 at tsec driver
+
+ Currently VSC8601 doesn't link with 10/100M partners if the
+ EEPROM/Strapping is not set up.
+ Setting the auto-neg register fixes this.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 702c85b0e876d587c11acdbb55738ee52acd54f4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Sep 30 15:02:53 2008 +0900
+
+ net: ne2000: Divided a function of NE2000 driver
+
+ get_prom function was used __attriute__ , but it is not enable.
+ ax88796.o does not do link besides ne2000.o. When ld is carried
+ out, get_prom function of ax88796.c is ignored.
+ This problem is a thing by specifications of ld.
+ I checked and test this patch on SuperH and MIPS.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Oct 14 11:10:59 2008 +0900
+
+ sh: rsk7203: Add smc911x driver support to board config file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit cae6f909baf86357b3c0bd01acfc414348c4d175
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Oct 9 13:54:33 2008 +0900
+
+ sh: Fix cannot execute a stand-alone application
+
+ Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:00 2008 -0500
+
+ fsl_pci_init do not scan bus when configured as an end-point
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Sep 16 17:07:53 2008 -0400
+
+ ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
+
+ This is no longer necessary now that the GD_FLG_RELOC flag is set for
+ all ARM boards.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit d977a57356657ba241256231efca32828a5822f9
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Sep 13 10:04:32 2008 +0200
+
+ Fix lzma uncompress call (image_start wrongly used instead image_len)
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:15 2008 -0700
+
+ mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:05:34 2008 -0500
+
+ 86xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ Not know how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d01f66d235118515b5086b88f82498bc0695d6a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:26:36 2008 -0500
+
+ CFI: cfi_flash write fix for AMD legacy
+
+ The flash_unlock_seq requires a sector for AMD_LEGACY.
+ Fix a retcode check typeo.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 542b385a620a1783454a00424930e51895f45073
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:10 2008 +0200
+
+ ppc4xx: Fix USB 2.0 phy reset sequence
+
+ This patch fixes USB 2.0 communication issues on some DU440 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8c1ce11114c2260dedb5547281945f7db8fa5c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:09 2008 +0200
+
+ ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:08 2008 +0200
+
+ ppc4xx: Fix DU440 GPIO configuration
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35dd025c70fcc4389317db2f2a9d14795172137d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:07 2008 +0200
+
+ ppc4xx: Update DU440 config
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3bf9273939ffe1a60a32a2eef909097f15df56b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 8 15:36:39 2008 -0500
+
+ MPC8572DS: Fix compile warnings
+
+ Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
+ compile warnings:
+
+ cmd_i2c.c:112: warning: missing braces around initializer
+ cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dffd2446fb041f38ef034b0fcf41e51e5e489159
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Tue Sep 30 10:55:57 2008 +0200
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ Measurements with our MPC8544 board showed that the I2C bus frequency
+ is wrong by a factor of 1.5. Obviously, the interpretation of the
+ MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
+ correct. There seems to be an error in the 8544 RM.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
+Author: Rafal Czubak <rcz@semihalf.com>
+Date: Wed Oct 8 13:41:30 2008 +0200
+
+ FSL: Fix get_cpu_board_revision() return value.
+
+ get_cpu_board_revision() returned board revision based on information stored
+ in global static struct eeprom. It should instead use one from local struct
+ board_eeprom, to which the data is actually read from EEPROM. The bug led to
+ system hang after printing L1 cache information on U-Boot startup. The problem
+ was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
+ boards using CFG_I2C_EEPROM_CCID.
+
+ The change has been successfully tested on MPC8555CDS system.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 747f316cca484ed627a97dd3391febabce384186
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:49 2008 +0200
+
+ update uImage FIT multi documentation
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:36 2008 +0200
+
+ move README.imx31 to doc/ and merge with README.mx31
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 25 20:54:37 2008 +0200
+
+ i.MX31: switch to CFG_HZ=1000
+
+ Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
+ cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
+ provides 2% or 0.4% precision depending on the
+ CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
+ boot-delay.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
+Author: gnusercn <gnusercn@gmail.com>
+Date: Wed Oct 8 18:58:58 2008 +0200
+
+ Fix bug: in arch-arm, env_get_char dose not work fine
+
+ due to the arm implementation which supposed that U-Boot is in RAM
+ when we jump to start_armboot
+
+ Signed-off-by: gnusercn <gnusercn@gmail.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
+Author: Adam Graham <agraham@amcc.com>
+Date: Mon Oct 6 10:16:13 2008 -0700
+
+ ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
+
+ After changing SDRAM_CLKTR phase value rerun the memory preload
+ initialization sequence (INITPLR) to reset and relock the memory
+ DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
+ adjustment effects the phase relationship of the internal, to the
+ PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:48:03 2008 -0400
+
+ Remove redundant #define for MPC8536DS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 445a7b38308eb05b41de74165b20855db58c7ee5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:47:30 2008 -0400
+
+ Add ID EEPROM support for MPC8572DS
+
+ The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
+ system information like mac addresses etc. This patch enables it.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:46:59 2008 -0400
+
+ Minor fixes for I2C address on MPC8572DS
+
+ MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
+ according to the board spec, and adds the 2nd i2c bus offset.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Sat Sep 27 14:40:57 2008 +0800
+
+ Fix the incorrect DDR clk freq reporting on 8536DS
+
+ On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
+ The display is still sync mode DDR freq. This patch try to fix
+ this. The display DDR freq is now the actual freq in both
+ sync and async mode.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 7 10:28:46 2008 -0500
+
+ 85xx: Remove setting of *cache-line-size in device trees
+
+ ePAPR says if the *cache-block-size is the same as *cache-line-size
+ than we don't need the *cache-line-size property.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cd3cb0d9269d155276b00207e3816a9347fd1c92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Oct 4 07:56:06 2008 -0400
+
+ libfdt: Fix error in documentation for fdt_get_alias_namelen()
+
+ Oops, screwed up the function name in the documenting comment for this
+ function. Trivial correction in this patch.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 20 16:55:14 2008 +1000
+
+ libfdt: Add function to explicitly expand aliases
+
+ Kumar has already added alias expansion to fdt_path_offset().
+ However, in some circumstances it may be convenient for the user of
+ libfdt to explicitly get the string expansion of an alias. This patch
+ adds a function to do this, fdt_get_alias(), and uses it to implement
+ fdt_path_offset().
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Oct 2 01:55:38 2008 -0400
+
+ cfi_flash: do not reset flash when probe fails
+
+ The CFI flash driver starts at flash_init() which calls down into
+ flash_get_size(). This starts by calling flash_detect_cfi(). If said
+ function fails, flash_get_size() finishes by attempting to reset the
+ flash. Unfortunately, it does this with an info->portwidth set to 0x10
+ which filters down into flash_make_cmd() and that happily smashes the
+ stack by sticking info->portwidth bytes into a cfiword_t variable that
+ lives on the stack. On a 64bit system you probably won't notice, but
+ killing the last 8 bytes on a 32bit system usually leads to a corrupt
+ return address. Which is what happens on a Blackfin system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 26 17:03:26 2008 +0200
+
+ fdt: Overwrite /chosen node in bootm if it already exists in the dtb
+
+ Set force parameter in fdt_chosen() call in do_bootm_linux() call.
+ Without this, the chosen node is not overwritten if it already
+ exists.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Sep 25 11:02:17 2008 -0500
+
+ Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
+
+ Using Gcc 4.3 detected this problem:
+
+ ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
+ ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
+ occur when assuming that (X + c) < X is always false
+
+ To fix the problem, treat the offset as an unsigned int.
+
+ The problem report and proposed fix were provided
+ by Steve Papacharalambous <stevep@freescale.com>.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Aug 29 14:19:13 2008 +1000
+
+ libfdt: Fix bugs in fdt_get_path()
+
+ The current implementation of fdt_get_path() has a couple of bugs,
+ fixed by this patch.
+
+ First, contrary to its documentation, on success it returns the length
+ of the node's path, rather than 0. The testcase is correspondingly
+ wrong, and the patch fixes this as well.
+
+ Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
+ instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
+ Specifically this happens when there is insufficient space even to
+ hold the path's second last component. This behaviour is corrected,
+ and the testcase updated to check it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 33af3e6656e84660d397b5dd95abab2dccc36f83
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 1 12:34:58 2008 +0200
+
+ TQM5200: enable support for ATAPI devices
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 15 05:48:25 2008 +0200
+
+ Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
+
+ we need this due to the arm implementation which supposed that U-Boot
+ is in RAM when we jump to start_armboot
+
+ This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
+ in order to do it for all arm board
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Sep 24 08:46:25 2008 -0500
+
+ mpc83xx: don't disable autoboot
+
+ bootdelay set to -1 'permanently' disables autobooting, even if
+ bootcmd is specified. Change to a positive value to allow
+ autobooting when a bootcmd is set.
+
+ Reported-by: Coray Tate <Coray.Tate@freescale.com>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Sep 24 10:42:15 2008 +0900
+
+ mpc83xx: Fix typo in include/mpc83xx.h
+
+ Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162c41c03179727a1d14262f703c9a8bc40231fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Sep 23 09:38:49 2008 -0500
+
+ mpc83xx: add h/w flash protection to board configs
+
+ the operating system may leave flash in a h/w locked state after writing.
+ This allows u-boot to continue to write flash by enabling h/w unlocking
+ by default.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Sep 11 21:35:36 2008 +0400
+
+ mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
+
+ The spd_dram code shifts the base address, then masks 20 bits, but
+ forgets to shift the base address back. Fix this by just masking the
+ base address correctly.
+
+ Found this bug while trying to relocate a DDR memory at the base != 0.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8fd4166c467a46773f80208bda1ec3b4757747bc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 16:10:43 2008 +0200
+
+ ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
+
+ Depending on the configuration jumper "SATA SELECT", U-Boot disabled
+ either one PCIe node or the SATA node in the device tree blob. This
+ patch removes the unnecessary and even confusing warning, when the node
+ is not found at all.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Sep 19 13:30:06 2008 +0200
+
+ Add missing device types to dev_print() in part.c
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 22 22:23:06 2008 +0200
+
+ Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
+ eventually leads to a machine check. This change assures that DPRAM
+ is allocated only once in that case.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:57:34 2008 +0200
+
+ Fix Spartan-3 definitions.
+
+ A few Spartan-3 definitions erroneously use Spartan-3E size
+ constants. This patch fixes them.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+
+commit 28113e1f0da4146b823ffce37680d31d5685a60b
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:41:58 2008 +0200
+
+ Remove duplicate Spartan-3E definition.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 13:46:17 2008 +0200
+
+ socrates: change default mtest address range
+
+ Running mtest command on socrates without specifying
+ an address range crashes the board. This patch changes
+ default mtest address range to prevent this behavior.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 12:34:45 2008 +0200
+
+ socrates: fix crash after relocation
+
+ Currently U-Boot crashes after relocation to RAM.
+ Changing the CPO value of the DDR SDRAM TIMING_CFG_2
+ register to READ_LAT + 1 (to the value it was before
+ conversion of socrates to new DDR code) fixes the
+ problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 562788b0a303f3528b920d81f547f5ca77ba528e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 11:45:51 2008 +0200
+
+ socrates: fix SPD EEPROM address
+
+ Commit be0bd8234b9777ecd63c4c686f72af070d886517
+ changed SPD EEPROM address to 0x51 and DDR SDRAM
+ detection stopped working. Change this address
+ back to 0x50.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 023824549a370bd185d7129d9a6c86f9be7b86a8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 11:06:50 2008 +0200
+
+ Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
+
+ This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b5d10a13525c07ec6374adf840d7c87553b5f189
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:34:36 2008 +0900
+
+ sh: Fix compile warning
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4a065abf926f128beb36d93449defa0d690e7fef
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:04:26 2008 +0900
+
+ sh: Add support watchdog for SH4A core
+
+ Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
+ And fix some compile warning.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:45:26 2008 +0900
+
+ sh: Fix typo in SH serial driver
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:08:36 2008 +0900
+
+ sh: Add support any page size and empty_zero_page to SH Linux uImage
+
+ Old U-Boot supported 4KB page size only. If this version, Linux
+ kernel can not get command line from U-Boot.
+ SH Linux kernel can change page size and empty_zero_page.
+ This patch support this function and fix promlem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce9f99ddb59628f41dc534e892368a7d66dfc774
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:52 2008 +0900
+
+ sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
+
+ Add function of smc911x, pkt_data_pull and pkt_data_push.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 18 13:57:32 2008 +0200
+
+ ADS5121: fix typo in "rootpath" default setting
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 17 10:17:55 2008 +0200
+
+ Coding style cleanup; update CHANEGLOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 16 06:59:13 2008 -0700
+
+ ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ce47eb402c5e29a025399dc282246414fc492940
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 16 10:04:47 2008 -0500
+
+ Support for multiple SGMII/TBI interfaces for TSEC ethernet
+
+ Fix TBI PHY accesses to use the proper offset in CPU register space. The
+ previous code would incorrectly access the TBI PHY by reading/writing to CPU
+ register space at the same location as would be used to access external PHYs.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7c803be2eb3cae245dedda438776e08fb122250f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 16 18:02:19 2008 +0200
+
+ TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
+
+ After switching to using the CFI flash driver, the correct remapping
+ of the flash banks was forgotten.
+
+ Also, some boards were not adapted, and the old legacy flash driver
+ was not removed yet.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 14 00:59:35 2008 +0200
+
+ Prepare v2008.10-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 13 02:23:05 2008 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0c32565f536609d78feef35c88bbc39d3ac53a73
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 10 09:18:34 2008 -0500
+
+ Update mailing list email and archive addresses
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: autoprobe Lime chip
+
+ This patch is an attempt to implement autoprobing for the Lime
+ presence on the bus.
+ Configure GPCM for Lime CS2 and try to access chip ID registers.
+ Second read atempt delivers register values if the chip is present.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: Add support for new image format.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Sep 11 17:28:18 2008 +0900
+
+ sh: Fix compile error for r2dplus
+
+ netdev.h was not include by r2dplus.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 56844a22b76c719e600047e23b80465a44d76abd
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Sep 11 08:11:23 2008 +0200
+
+ powerpc: Fix bootm to boot up again with a Ramdisk
+
+ Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
+ and this stopped Linux from booting with a Ramdisk. This patch fixes
+ this, by deleting the useless dummy mem reservation.
+
+ When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
+ added to of_size, so we dont need anymore a dummy mem reservation.
+
+ I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
+ system (=0x44 bytes) and rounded it up to 0x80).
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Mon Sep 8 02:46:13 2008 +0200
+
+ Add support for LZMA uncompression algorithm.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0008b6d968160abe2bfd936493f3a516a7c8da20
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:20 2008 +0400
+
+ fsl_elbc_nand: ecclayout cleanups
+
+ This patch deletes oobavail assignments, they're calculated by the nand
+ core code in nand_scan_tail, plus current oobavail values are wrong for
+ the LP NANDs.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:13 2008 +0400
+
+ fsl_elbc_nand: implement support for flash-based BBT
+
+ This patch implements support for flash-based BBT for chips working
+ through ELBC NAND controller, so that NAND core will not have to re-scan
+ for bad blocks on every boot.
+
+ Because ELBC controller may provide HW-generated ECCs we should adjust
+ bbt pattern and bbt version positions in the OOB free area.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 97ae023648e764f794ffb9c52da109d6caf09c47
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:04 2008 +0400
+
+ fsl_elbc_nand: fix OOB workability for large page NAND chips
+
+ For large page chips, nand_bbt is looking into OOB area, and checking
+ for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
+ reserved for bbt means.
+
+ But ELBC driver is specifying ecclayout so that oobfree area starts at
+ offset 1, so only one byte left for the bbt purposes.
+
+ This causes problems with any OOB users, namely JFFS2: after first mount
+ JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
+
+ OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+
+ And on the next boot, NAND core will rescan for bad blocks, then will
+ see "0xff 0x19" pattern, and will mark all blocks as bad ones.
+
+ To fix the issue we should implement our own bad block pattern: just one
+ byte at OOB start. Though, this will work only for x8 chips. For x16
+ chips two bytes must be checked. Since ELBC driver does not support x16
+ NANDs (yet), we're safe for now.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7238ada313057a85409485b8ee21515dc10c07a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 12 13:52:21 2008 +0200
+
+ MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b18410e508a12ba0a177dfc2a386857c806fa96d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 11 13:05:56 2008 +0200
+
+ ppc4xx: Enable device tree (FDT) support in zeus board port
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Sep 10 16:53:47 2008 +0200
+
+ ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
+
+ This patch fixes a problem introdiced with patch
+ bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
+ initdram()].
+
+ The boards affected are:
+ - PCI405
+ - PPChameleonEVB
+ - quad100hd
+ - taihu
+ - zeus
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 61737c59a3285f6fadf96a5836879898c04ec28d
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:26 2008 -0400
+
+ ppc4xx: Add .gitignore file to xilinx-ppc440 boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:25 2008 -0400
+
+ ppc4xx: Fix compilation of v5fx30teval_flash
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Sep 10 17:44:30 2008 -0400
+
+ ppc4xx: Fix in-tree build for ppc440-generic boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM: synchronize mach-types.h with linux 2.6.27-rc6
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
+
+ This patch prevents linker error on AT91RM9200 boards, if
+ CONFIG_CMD_I2_TREE is set.
+ It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 03db53335c8eba656a7c44d1555b1a4514383e33
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ make: Remove redundant __ARM__ addition when cross-compiling on *BSD
+
+ __ARM__ is given by arm_config.mk automatically.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
+Author: Claudio Scordino <claudio@evidence.eu.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ Fix MACH_TYPE for the AT91RM9200DK board.
+
+ Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
+
+commit 274737e5eb25b2bcd3af3a96da923effd543284f
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.mx change get_timer(base) to return time since base
+
+ This patch changes get_timer() for i.MX to return the time since
+ 'base' instead of the time since the counter was at zero.
+
+ Symptom seen is flash timeout errors when erasing or programming a
+ sector using the common cfi flash code.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 48fed40575b3e8eae960eb0141509ddd9a73012a
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.MX use u-boot baud rate and don't assume UART master clock
+
+ 1) Change the i.MX serial driver to use the baud rate set in the
+ u-boot environment
+
+ 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
+
+ 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
+ one to clear" like other status bits in the reg.)
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 6e1551a870d360805b9d172dc56d935064abe71d
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ arm920t fix constant error in start.S
+
+ Code in cpu/arm920t/start.S will die with a compilation error if
+ CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
+ the ARM sub instruction. Change the code so that each is subtracted
+ independently to avoid the error.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Fri Sep 12 02:20:40 2008 +0200
+
+ ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
+
+ - Correct Invalid #define of MPUTIM_PTV_MASK for
+ omap1510 & omap730 register definition
+
+ MPUTIM_PTV_MASK is defined as
+ #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+
+ while it should have been
+ #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
+
+ - Below Patch corrects the same
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Fri Jul 18 11:52:02 2008 -0400
+
+ Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit eb16135df20535b0d19969f50fb5bd17f95e9c25
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Aug 28 12:25:11 2008 +0200
+
+ i.MX31: document timer precision option
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1a6337b01351b82a45b0defa76f08744511c580b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:18 2008 +0200
+
+ i.MX31: Make the SPI bus and chip select configurable for MC13783
+
+ The i.MX31 has three SPI buses and each bus has several chip selects
+ and the MC13783 chip can be connected to any of these. The current
+ RTC driver for MC13783 is hardcoded for CSPI2/SS2.
+
+ This patch makes make MC13783 SPI bus and chip select configurable
+ via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8c4ebec25b21e355b8488698ec1594da9701fff4
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:17 2008 +0200
+
+ i.MX31: Add reset_timer() and modify get_timer_masked().
+
+ This patch adds the reset_timer() function (needed by nand_base.c) and
+ modifies the get_timer_masked() to work in the same way as the omap24xx
+ function.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit deeec4991a55de243787002ede24d2331d234fc8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0e8d158664a913392cb01fb11a948d83f72e105e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:06 2008 +0200
+
+ rename CFG_ENV macros to CONFIG_ENV
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ nvedit: rename error comment to CONFIG_ENV_IS_IN_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b64b775e7546ed138df360ceb3a71ee358cb9a01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ cmd_mem: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ move cmd_get_data_size to command.c
+
+ add CMD_DATA_SIZE macro to enable it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 507641d2491980531932b9f25dab37fe5e6c3a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ env_flash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5a1aceb0689e2f731491838970884a673ef7e7d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:03 2008 +0200
+
+ cleanup use of CFG_ENV_IS_IN_FLASH
+
+ - #if CFG_ENV_IS_IN_FLASH
+ - #if (CFG_ENV_IS_IN_FLASH == 1)
+ - #define CFG_ENV_IS_IN_FLASH 0
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ rename environment.c in env_embedded.c to reflect is functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c0878af6e32f0fd8e13a6ca315b9add64441115a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ env_nowhere: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93f6d72544da4510a146bc4c93d609b0116cde37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2556ef78113b5f089dfcac5da90bf31dd568397b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_sf: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55c5f49910ec8225347aa1d211352a84de6649b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_onenand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9656138ff1a34d4c4768db6b490deffc40ee674b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 957a0e69575683efd70ace147746bbb3d8e7c501
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nvram: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9314cee6917444ab88bd4e758da7a30975120187
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 51bfee192099206a4397f15f3b93516e01f58ab0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ env_dataflash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 057c849c45b9ee19df8ff3acdeee66be52819962
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:52 2008 +0200
+
+ cmd_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:54 2008 +0200
+
+ env_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:30 2008 +0200
+
+ rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 32628c5008105a732212003d83b75f05e5243bb2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:54:58 2008 +0200
+
+ cmd_mac: Move conditional compilation to Makefile
+
+ finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
+ start in commit ad8f8687b78c3e917b173f038926695383c55555
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e5648acab153f0f429bfc714902c5aaa7879f71b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:41 2008 +0200
+
+ cmd_fdc: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:38 2008 +0200
+
+ common/Makefile: add core command section
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:29:57 2008 +0200
+
+ cmd_vfd: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6644641d072aee3087da129d8443187196a4d8a9
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Sep 10 11:48:49 2008 -0500
+
+ delta, zylonite: Update nand_oobinfo to nand_ecclayout.
+
+ This is part of the switch to newer upstream MTD code.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Sat Aug 30 17:06:55 2008 -0400
+
+ ARM DaVinci: Fix broken HW ECC for large page NAND.
+
+ Based on original patch by Bernard Blackham <bernard@largestprime.net>
+
+ U-boot's HW ECC support for large page NAND on Davinci is completely
+ broken. Some kernels, such as the 2.6.10 one supported by
+ MontaVista for DaVinci, rely upon this broken behaviour as they
+ share the same code for ECCs. In the existing scheme, error
+ detection *might* work on large page, but error correction
+ definitely does not. Small page ECC correction works, but the
+ format is not compatible with the mainline git kernel.
+
+ This patch adds ECC code that matches what is currently in the
+ Davinci git repository (since NAND support was added in 2.6.24).
+ This makes the ECC and OOB layout written by u-boot compatible with
+ Linux for both small page and large page devices and fixes ECC
+ correction for large page devices.
+
+ The old behaviour can be restored by defining the macro
+ CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Sep 10 11:15:28 2008 +0200
+
+ muas3001: update BR4 settings
+
+ Also set up the port pins for using I2C.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3591293509e0c0bcf244b0f974775bff2e25697e
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date: Wed Sep 10 09:43:49 2008 +0300
+
+ autoscr: Fix one-character lines and non-newline terminated scripts
+
+ When not using hush, the autoscr command now executes lines that are
+ only one character long. It also runs the last line of scripts even if
+ it does not end in a newline.
+
+ Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+
+commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 9 15:13:29 2008 -0700
+
+ ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
+
+ On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
+ and glacier.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+
+commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:21:11 2008 +0200
+
+ muas3001: added support for the LM75 sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:20:19 2008 +0200
+
+ muas3001: activate WDT for the muas3001 board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:19:36 2008 +0200
+
+ muas3001: added 64MB SDRAM autodetection.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5251469943895de4bb9a04d5053352cc22acb7d5
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Thu Aug 21 07:12:26 2008 -0700
+
+ Fix printf errors under -DDEBUG
+
+ Fix printf format-string/arg mismatches under -DDEBUG.
+
+ These warnings occur with DEBUG defined for a platform using
+ cpu/mpc85xx. Users of other architectures can unearth similar
+ problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
+ after "CFLAGS += $(call cc-option,-fno-stack-protector)".
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 23:55:18 2008 +0200
+
+ Update CHANGELOG, prepare 2008-10-rc1 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 08:51:29 2008 -0500
+
+ 85xx: Ensure timebase is zero on secondary cores
+
+ The e500um says the timebase is volatile out of reset. To ensure
+ TB sync works we need to make sure its zero.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Tue Sep 9 22:18:24 2008 +0200
Signed-off-by: Jason McMullan <mcmullan@netapp.com>
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 17:55:31 2008 +0200
+
+ trab: fix build problem after change to use do_div()
+
+ We must link with libgeneric now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
Author: Ryan CHEN <ryan.chen@st.com>
Date: Wed Aug 20 13:00:17 2008 -0400
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 36241ca29d4804a1006fb3f26069effda5202581
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Tue Sep 9 01:22:39 2008 +0200
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
+commit 8febd13c69cb68652577d1a9fcbde954bf784155
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
Author: Wolfgang Denk <wd@denx.de>
Date: Mon Sep 8 23:26:22 2008 +0200