+commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 14 09:47:27 2007 +0200
+
+ Coding style cleanup; rebuild CHANGELOG
+
+commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
+Author: Randy Vinson <rvinson@linuxbox.(none)>
+Date: Tue Feb 27 19:42:22 2007 -0700
+
+ 85xxCDS: Add make targets for legacy systems.
+
+ The PCI ID select values on the Arcadia main board differ depending
+ on the version of the hardware. The standard configuration supports
+ Rev 3.1. The legacy target supports Rev 2.x.
+
+ Signed-off-by Randy Vinson <rvinson@mvista.com>
+
+commit e41094c7e38177c755fbd9b182018069614f080d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 01:50:09 2007 -0500
+
+ 85xxCDS: Enable the VIA PCI-to-ISA bridge.
+
+ Author: Randy Vinson <rvinson@linuxbox.(none)>
+
+ Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
+ Arcadia main board.
+
+ Signed-off-by: Randy Vinson <rvinson@mvista.com>
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 00:14:25 2007 -0500
+
+ Add support for UEC to 8568
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit c59e4091ffe0148398b9e9ff14a019ea038b7432
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jun 19 14:18:34 2007 -0400
+
+ Add PCI support for MPC8568MDS board
+
+ This patch is against u-boot-mpc85xx.git of www.denx.com
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
+
+commit d111d6382c99fdea08c2312eeeae8786945e189a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jun 19 14:18:32 2007 -0400
+
+ Empirically set cpo and clk_adjust for mpc85xx DDR2 support
+
+ This patch is against u-boot-mpc85xx.git of www.denx.com
+
+ Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
+ both MPC8548CDS board and MPC8568MDS board, especially for supporting
+ 533MHz DDR2.
+
+ Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
+ DDR2 on all current board versions especially ver 1.92 or later to bring
+ up.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 3db0bef59eab1155801618cef5c481e97553b597
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 7 18:07:27 2007 -0500
+
+ Use an absolute address when jumping out of 4k boot page
+
+ On e500 when we leave the 4k boot page we should use an absolute address since
+ we don't know where the board code may want us to be really running at.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Aug 13 14:49:59 2007 -0500
+
+ MPC85xx BA bits not set for 3-bit bank address DIMM
+
+ The current implementation does not set the number of bank address bits
+ (BA) in the processor. The default assumes 2 logical bank bits. This
+ works fine for a DIMM that uses devices with 4 internal banks (SPD
+ byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
+ devices with 8 internal banks (SPD byte17 = 0x8).
+
+ Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
+
+commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Aug 13 14:38:06 2007 -0500
+
+ Fix minor 85xx warnings
+
+ Some patches had inserted warnings into the build:
+ * mpc8560ads declared data without using it
+ * cpu_init declared ecm and immap without using it in all CONFIGs
+ * MPC8548CDS.h had its default filenames changed so that they contained
+ "\m" in the paths. Made the defaults not Windows-specific (or
+ anything-specific)
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f2cff6b104f82b993bef6086ce0c97159bbe1add
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:52 2007 -0500
+
+ 8548cds PCIE support.
+
+ Make the early L1 cache stack region guarded to prevent speculative
+ fetches outside the locked range.
+
+ Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
+ init.S whitespace cleanup.
+
+ Allow TEXT_BASE value to be specified on command line. This allows it
+ to be set to 0xfffc0000 which cuts the uboot binary in half.
+
+ Clear and enable lbc and ecm errors.
+
+ Update last_busno in device-tree for pci and pcie.
+
+ Remove load of obsolete cpu/mpc85xx/pci.0
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:51 2007 -0500
+
+ 8544ds PCIE support
+
+ PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
+
+ Enable LBC and ECM errors and clear error registers.
+
+ Add tftpflash env var to get uboot from tftp server and flash it.
+
+ Add pci/pcie convenience env vars to display register space:
+ "run pcie3regs" to see all pcie3 ccsr registers
+ "run pcie3cfg" to see all cfg registers
+ Whitespace cleanup and MPC8544DS.h
+
+ Enable CONFIG_INTERRUPTS.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 01:34:21 2007 -0500
+
+ 85xx start.S cleanup and exception support
+
+ From: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+ Support external interrupts from platform to eliminate system hangs.
+ Define CONFIG_INTERRUPTS board configure option to enable.
+ Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
+
+ Remove extra cpu initialization redundant with hardware initialization.
+ Whitespace cleanup.
+
+ Define and use _START_OFFSET consistent with other processors using
+ ppc_asm.tmpl
+
+ Move additional code from .text to boot page to make room for
+ exception vectors at start of image.
+
+ Handle Machine Check, External and Critical exceptions.
+
+ Fix e500 machine check error determination in traps.c
+
+ TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Aug 14 01:33:18 2007 -0500
+
+ Add MPC8544DS README
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:48 2007 -0500
+
+ 85xx allow debugger to configure ddr.
+
+ Only check for mpc8548 rev 1 when compiled for 8548.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:47 2007 -0500
+
+ mpc85xx L2 cache reporting and SRAM relocation option.
+
+ Allow debugger to override flash cs0/cs1 settings to enable alternate
+ boot regions
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:46 2007 -0500
+
+ e500 needs ppc_asm.tmp MCK_EXCEPTION
+
+ Always define MCK_EXCEPTION macro - so e500 can use it too.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 53a5c424bf8655b7b4e2c305a441963259a26a81
+Author: David Updegraff <dave@cray.com>
+Date: Mon Jun 11 10:41:07 2007 -0500
+
+ multicast tftp: RFC2090
+
+ Implemented IETF RFC2090, Multicast TFTP. Initial implementation
+ on Realtek RTL8139 and Freescale TSEC.
+
+ Signed-off-by: David Updegraff <dave@cray.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
+Author: Wilson Callan <wcallan@savantav.com>
+Date: Sat Jul 28 10:56:13 2007 -0400
+
+ New CONFIG_BOOTP_SERVERIP option
+
+ Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
+ from the bootp server
+
+ Signed-off-by: Wilson Callan <wcallan@savantav.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Sun Aug 12 08:48:27 2007 +0300
+
+ Add ability to take MAC address from the environment to DM9000 driver
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit be5d72d10d47609326226225181e301fb9a33b58
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 13 21:57:53 2007 +0200
+
+ Minor coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Sat Aug 11 06:54:58 2007 -0500
+
+ Modify SBC8641D to use new Freescale PCI routines
+
+ PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
+ adapter.
+
+ Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Signde-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a08458303e7f9db67f296980036d3292c35cb45c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:38:51 2007 +0200
+
+ atmel_mci: Fix data timeout value
+
+ Calculate the data timeout based on values from the CSD instead of
+ just using a hardcoded DTOR value. This is a backport of a similar fix
+ in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
+ instead of down.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Aug 13 17:22:31 2007 +0200
+
+ AVR32: Include <div64.h> instead of <asm/div64.h>
+
+ include/asm-avr32/div64.h was recently moved to include/div64.h, but
+ cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
+ the patch was merged perhaps?)
+
+ This patch updates cpu/at32ap/interrupts.c so that the avr32 port
+ compiles again.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Jun 27 13:34:26 2007 +0200
+
+ atmel_mci: Use 512 byte blocksize if possible
+
+ Instead of always using the largest blocksize the card supports, check
+ if it can support smaller block sizes and use 512 bytes if possible.
+ Most cards do support this, and other parts of u-boot seem to have
+ trouble with block sizes different from 512 bytes.
+
+ Also enable underrun/overrun protection.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+
+commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 21:34:50 2007 +0200
+
+ Update CHANGELOG
+
+commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 21:34:34 2007 +0200
+
+ Minor alignment of output, 2nd try.
+ Also update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b309f22a724fad8418e811751a0741b893419cf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 20:35:49 2007 +0200
+
+ Minor alignment of output
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 18:28:18 2007 +0200
+
+ Cleanup output on ADS5121 board
+
+ Signed-off-by: Wolfgang Denk
+
+commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 15:11:38 2007 +0200
+
+ Adapt board configuration and fix kernel crash on MCC200 board.
+
+ The update procedure was modified to turn off the USB subsystem
+ before exit for MCC200 and TRAB. This is necessary as otherwise the
+ USB controller continues to write periodically to system memory!
+
+ MCC200-specific notes:
+ - the patch disables the magic key check for MCC200
+ - the patch contains the configuration changes made
+ for the new revision of the board.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 14:47:54 2007 +0200
+
+ Adjust default configuration of ADS5121 board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 14:27:39 2007 +0200
+
+ Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5fe6be6208dda852c3564e384bd78d75784dea3e
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Aug 7 21:14:22 2007 -0400
+
+ Improve error print messages.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 17 13:57:04 2007 -0500
+
+ fdt: allow for builds that don't want env and bd_t nodes
+
+ protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
+ area.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 91148bf7aeba142d6f348805db7625db7da64d6f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 17 13:56:53 2007 -0500
+
+ fdt: do board setup based on fdt address specified on bootm line
+
+ The last fdt patch to bootm did board setup based on the address
+ specified by a prior fdt address command invocation. The bootm
+ code, as its call to fdt_chosen does, should use the fdt specified
+ by the user on the bootm command. Note this restores full
+ functionality for the 8360's existing default boot environment
+ values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
+ before booting a kernel).
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e125a2ffc209dd34794e326c7175658253beadf3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jul 10 20:40:39 2007 -0400
+
+ Call ft_board_setup() from the bootm command.
+
+ In the patch titled "Create new fdt boardsetup command..." I removed the
+ call to ft_board_setup() from the routine fdt_chosen(), but I forgot
+ to add a direct call back into cmd_bootm.c
+
+ This fixes the oversight by adding the direct call to the bootm command.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 23:25:28 2007 -0400
+
+ Create new fdt boardsetup command, fix bug parsing [] form of set values.
+
+ Previously ft_board_setup() was called by fdt_chosen() which was not
+ really correctly structured. This splits ft_board_setup() out by creating
+ a new fdt boardsetup command.
+
+ Fix a bug when parsing fdt set command values which have the square
+ bracket form [00 11 22 33] - the length was updated incorrectly in when
+ parsing that form.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 6f35ded9e85493595e0eb66a82b502a95326d049
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 20:55:58 2007 -0400
+
+ Tighten up the error messages.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit c45874b05aae897a6c29d1a97d4bb708fca2756c
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 25 19:52:23 2007 -0400
+
+ Asthetic improvements: error messages and line lengths.
+
+ Tighten up the error messages, split overlength lines.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri May 25 22:08:57 2007 -0400
+
+ Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
+
+ The fdt_chosen() function was adding/seting some properties ad-hoc
+ improperly and duplicated (poorly) what was done in ft_board_setup()
+
+ Clean up long lines (setting properties, printing errors).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 06e19a07701c968f15d72c083b5872a1a11c7b01
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon May 21 23:27:16 2007 -0400
+
+ For fdt_find_node_by_path(), handle the root path properly.
+
+ Also removes the special case root path detection in cmd_fdt.c since it
+ is no longer necessary.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu May 17 23:54:36 2007 -0400
+
+ Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1a861169bc3758f9de3aead62b058736c6891246
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Jun 6 22:47:58 2007 -0400
+
+ Replace fdt_node_offset() with fdt_find_node_by_path().
+
+ The new name matches more closely the kernel's name, which is also
+ a much better description.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed May 16 22:39:59 2007 -0400
+
+ Fix cmd_fdt line lengths, refactor code.
+
+ Break lines that were greater than 80 characters in length.
+ Move the fdt print and property parsing code to separate static functions
+ to reduce coding clutter in the fdt_cmd handling body.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 25114033ab21788810c48ba4df103b649da1223b
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat May 12 09:47:25 2007 -0400
+
+ FDT command improvements.
+
+ Fix "fdt set" so that it will create a non-existing property.
+ Add "fdt mknode" to create nodes.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 38eb508e8e811e2e57628f445de3a24a23c7d804
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat May 12 09:45:46 2007 -0400
+
+ Reorganize and fix problems (returns) in the bootm command.
+
+ Do *NOT* return after the "point of no return" has been passed.
+ If something goes wrong, the board must be reset after that point.
+ Move the "Transferring control to Linux" debug message back to where it
+ belongs: just before transferring control to linux.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 89c8757d8f213c47709bdc4efe0695263a6080a6
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue May 8 21:27:35 2007 -0400
+
+ Fix bugs in the CONFIG_OF_LIBFDT
+
+ Stupid coding mistakes (identified by Timur Tabi, thanks).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 22:47:15 2007 -0400
+
+ Improve fdt move length handling.
+
+ Make the length parameter optional: if not specified, do the move using
+ the current size unchanged.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 22:23:36 2007 -0400
+
+ Minor code clean up.
+
+ Declare the variable fdt properly as extern.
+ Call the "set_fn" function pointer the "short way" without the full
+ dereferencing syntax.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Apr 25 21:24:27 2007 -0400
+
+ Improve error messages, more informative.
+
+ Print more than the raw libfdt error message strings. This is especially
+ useful for cluing in the user when the bootm command aborts due to
+ blob problems.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 20 22:46:53 2007 -0400
+
+ libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
+
+ This is the way u-boot reduces configured-out code. At Wolfgang
+ Grandegger and Wolfgang Denk's request, make libfdt conform.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 923efd286411ed052d9e074f59f8986d6081061c
+Author: Bruce Adler <bruce.adler@ccpu.com>
+Date: Fri Aug 10 14:54:47 2007 -0700
+
+ add image size and descriptors for Spartan 3E FPGA chips
+
+ Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
+
+ Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
+
+commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 15:34:48 2007 -0500
+
+ make MAKEALL more immune to merge conflicts
+
+ ..by placing board entries one per line, as suggested by jdl.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 10 13:28:25 2007 -0500
+
+ README: Remove outdated cpu type, board type, and NAME_config lists
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49bb59912d21aacb507eb81fd21fb7af650c706c
+Author: Dave Liu <r63238@freescale.com>
+Date: Fri Aug 10 15:48:59 2007 +0800
+
+ mpc83xx: Suppress the warning 'burstlen'
+
+ suppress the warning 'burstlen' of spd_sdram.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c646bba6465a45c60746d4cc1602cd06c1960f2d
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 15:11:03 2007 -0500
+
+ Add support for SBC8641D. Config files.
+
+ Add support for Wind River's SBC8641D reference board.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8ac273271d57321f90505c7a51cdb1ef2113b628
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 15:10:53 2007 -0500
+
+ Add support for SBC8641D. Board files.
+
+ Add support for Wind River's SBC8641D reference board.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit c2c0ab4aff86622b837a48a0e560351f9afafb95
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 10 20:34:58 2007 +0200
+
+ Conding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
+Author: Sergey Kubushyn <ksi@koi8.net>
+Date: Fri Aug 10 20:26:18 2007 +0200
+
+ [ARM] TI DaVinci support, hopefully final
+
+ Add support for the following DaVinci boards:
+ - DV_EVM
+ - SCHMOOGIE
+ - SONATA
+
+ Changes:
+
+ - Split into separate board directories
+ - Removed changes to MTD_DEBUG (or whatever it's called)
+ - New CONFIG_CMD party line followed
+ - Some cosmetic fixes, cleanup etc.
+ - Patches against the latest U-Boot tree as of now.
+ - Fixed CONFIG_CMD_NET in net files.
+ - Fixed CONFIG_CMD_EEPROM for schmoogie.
+ - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
+ DV_EVM. Can't check if it works on SONATA, don't have a board any more,
+ but it at least compiles.
+
+ Here is an excerpt from session log on SCHMOOGIE...
+
+ U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
+
+ DRAM: 128 MB
+ NAND: 128 MiB
+ In: serial
+ Out: serial
+ Err: serial
+ ARM Clock : 297MHz
+ DDR Clock : 162MHz
+ ETH PHY : DP83848 @ 0x01
+ U-Boot > iprobe
+ Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
+ U-Boot > ping 192.168.253.10
+ host 192.168.253.10 is alive
+ U-Boot >
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+ Acked-by: Dirk Behme <dirk.behme@gmail.com>
+ Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:45 2007 -0500
+
+ fsl_pci_init cleanup.
+
+ Do not enable normal errors created during probe (master abort, perr,
+ and pcie Invalid Configuration access).
+
+ Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Jul 27 01:50:44 2007 -0500
+
+ pciauto_setup_device bars_num fix
+
+ Passing bars_num=0 to pciauto_setup_device should assign no bars.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Aug 6 17:39:44 2007 -0500
+
+ 8641hpcn: Do correct sized pointer math.
+
+ When I rebased Ed's patch and cleaned up a few compilation
+ problems, I apparently rebased my brain on crack first.
+ Fix that by doing (char *) sized pointer math as needed.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cfc7a7f5bb3273c9951173c788001d45118f141f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Aug 2 14:42:20 2007 -0500
+
+ cpu/86xx fixes.
+
+ Remove rev 1 fixes.
+ Always set PICGCR_MODE.
+ Enable machine check and provide board config option
+ to set and handle SoC error interrupts.
+
+ Include MSSSR0 in error message.
+
+ Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Aug 2 17:42:08 2007 +0200
+
+ Make use of generic 64bit division in nand_util.c
+
+ Use generic 64bit division in nand_util.c. This makes nand_util.c
+ independent of any toolchain 64bit division.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit f7c086e94e8ce9aad7268af97f73aa6884686f27
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Aug 2 17:41:14 2007 +0200
+
+ Move 64bit division from avr32 to generic lib
+
+ Move the 64bit division from lib_avr32 to lib_generic. With this, all
+ boards can do_div/__div64_32 if needed, not only avr one. Code is put
+ to lib_generic, so no larger memory footprint if not used. No code
+ modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 6 18:18:34 2007 -0500
+
+ mpc83xx: fix ITX[GP] O=builddir builds
+
+ make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
+
+ Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
+ "BUILD_DIR=<some dir> ./MAKEALL ..."
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Aug 1 15:00:59 2007 +0800
+
+ mpc83xx: Correct the README for DDR ECC
+
+ Update the README for DDR ECC, change the name
+ to README.mpc83xx.ddrecc.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Aug 1 15:00:15 2007 +0800
+
+ mpc83xx: Consolidate the ECC support of 83xx
+
+ Remove the duplicated source code of ecc command on the <board>.c,
+ for reused, move these code to cpu/mpc83xx directory.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 036575c544cf1b69654d8fb334bda69c6ff3da36
+Author: Dave Liu <r63238@freescale.com>
+Date: Sat Aug 4 13:37:39 2007 +0800
+
+ mpc83xx: Correct the burst length for DDR2 with 32 bits
+
+ The burst length should be 4 for DDR2 with 32 bits bus
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:33 2007 -0500
+
+ mpc83xx: add support for the MPC8323E RDB
+
+ MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
+ five 10/100 ethernet ports connected via an ICPlus IP175C
+ switch, one PCI slot, and serial. Features not supported
+ in this patch are SD card interface, 2 USB ports, and the
+ two phone ports.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:28 2007 -0500
+
+ mpc83xx: fixup generic pci for libfdt
+
+ add libfdt support to the generic 83xx pci code
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f57ac7a7b37109245b69db80839ebee26179966a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Jul 25 19:25:22 2007 -0500
+
+ mpc83xx: fix 8360 and cpu functions to update fdt being passed
+
+ ..and not the global fdt. Rename local fdt vars to blob so as not to
+ be confused with the global var with the same three-letter name.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 4 21:34:24 2007 -0400
+
+ mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
+
+ Several node strings were not correct (trailing slashes and properties
+ in the strings)
+ Added setting of the timebase-frequency.
+ Improved error messages and use debug() instead of printf().
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 26d02c9bbac1751c5e19294f000100b48d43a920
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 4 21:27:30 2007 -0400
+
+ mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
+
+ The new name matches more closely the kernel's name, which is also
+ a much better description.
+
+ These are the mpc83xx changes made necessary by the function name change.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9be39a67c9f8fef7107f5df09d673005f04d0963
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 10:41:56 2007 +0800
+
+ mpc83xx: Add support for the display of reset status
+
+ 83xx processor family has many reset sources, such as
+ power on reset, software hard reset, software soft reset,
+ JTAG, bus monitor, software watchdog, check stop reset,
+ external hard reset, external software reset.
+ sometimes, to figure out the fault of system, we need to
+ know the cause of reset early before the prompt of
+ u-boot present.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 10:41:04 2007 +0800
+
+ mpc83xx: Fix the align bug of SDMA buffer
+
+ According to the latest user manual, the SDMA temporary
+ buffer base address must be 4KB aligned.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon Jun 25 13:21:12 2007 +0800
+
+ mpc83xx: Revise the MPC8360EMDS readme doc
+
+ When the rev2.x silicon mount on the MPC8360EMDS baord,
+ and if you are using the u-boot version after the commit
+ 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
+ to make the ethernet interface usable, we have to setup
+ the jumpers correctly.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jul 3 13:46:32 2007 -0500
+
+ FSL I2C driver programs the two I2C busses differently
+
+ The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
+ The second I2C bus has its slave address programmed incorrectly and is
+ missing a 5-us delay.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
+Author: Timur Tabi <timur@freescale.com>
+Date: Tue Jul 3 13:04:34 2007 -0500
+
+ Update SCCR programming in cpu_init_f() to support all 83xx processors
+
+ Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
+ bitfields for all 83xx processors. The code to update some bitfields was
+ compiled only on some processors. Now, the bitfields are programmed as long
+ as the corresponding CFG_SCCR option is defined in the board header file.
+ This means that the board header file should not define any CFG_SCCR macros
+ for bitfields that don't exist on that processor, otherwise the SCCR will be
+ programmed incorrectly.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9546266999f0b9b51372636614211b88d90f0f25
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Fri Jun 22 13:04:22 2007 +0200
+
+ TQM834x: cleanup configuraton
+
+ Remove irritating #undef DEBUG
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
+Author: david.saada <David.Saada@ecitele.com>
+Date: Mon Jun 18 09:09:53 2007 -0700
+
+ MPC83xx: Fix makefile to generate config.h file in the build directory
+
+ MPC83xx: Fix the Makefile config sections to generate the include/config.h
+ file in the build directory instead of the source directory.
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
+Author: Lee Nipper <Lee.Nipper@freescale.com>
+Date: Thu Jun 14 20:07:33 2007 -0500
+
+ mpc83xx: Add support for 8360 silicon revision 2.1
+
+ This change adds 8360 silicon revision 2.1 support to u-boot.
+
+ Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 8 04:14:28 2007 -0500
+
+ Treat ppc64 host as ppc
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0dc4279b08ff82472bec2e2c90858602459febe8
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 8 09:01:46 2007 +0800
+
+ Minor fix for bios emulator makefile
+
+ Add $(obj) to LIB avoiding objects be built in the source dir
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Aug 8 08:33:11 2007 +0800
+
+ Add CONFIG_BIOSEMU define to guard all the bios emulator code
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+ This patch fix the compile issue on the board that did not enable the bios emulator
+
+commit ed8106433522f2ea8933e9808346860d061d7731
+Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
+Date: Tue Jul 31 12:27:25 2007 -0500
+
+ tsec: fix multiple PHY support
+
+ The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
+ broke multiple PHY support in tsec.c. This fixes it.
+
+ Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Thu Aug 9 09:08:18 2007 -0500
+
+ tsec: Allow Ten Bit Interface address to be configurable
+
+ Allow the address of the Ten Bit Interface (TBI) to be changed in the
+ event of a conflict with another device.
+
+ Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue Aug 7 16:17:06 2007 +0800
+
+ Add CONFIG_BIOSEMU define to guard all the bios emulator code
+
+ This patch fix the compile issue on the board that did not enable the bios emulator
+
+commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 7 16:02:13 2007 +0200
+
+ Fix missing brace error in fs/fat/fat.c
+ [pointed out by Roderik Wildenburg]
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 23:21:05 2007 +0200
+
+ Fixed typo in README (pointed out by Martin Jost).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 02:17:36 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 221838cc7eb178370ff62aa05920a582e12ac322
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue Jul 10 09:03:22 2007 +0800
+
+ Remove the bios emulator from MAI board.
+
+ The bios emulator in the MAI board can not pass compile
+ and have a lot of crap in it. remove it and will have a
+ clean and small bios emulator in the drivers directory
+ which can be uesed for every board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5618332409bb96f4448d1712899369fc80c0b489
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 13 12:14:59 2007 +0800
+
+ Fix some compile issues for MAI board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 0f460a1ee148b648ee242c3157650287d4296260
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 13 12:14:58 2007 +0800
+
+ Configurations for ATI video card BIOS emulator
+
+ This patch add definition of the BIOS emulator and the ATI framebuffer
+ driver for MPC8641HPCN board.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit ece92f85053b8df613edcf05b26a416cbc3d629c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 6 08:34:56 2007 +0800
+
+ This is a BIOS emulator, porting from SciTech for u-boot, mainly for
+ ATI video card BIOS. and can be used for x86 code emulation by some
+ modifications.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5072188acabde3178fac7f5a597150e6e74fd40c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Jul 6 08:33:33 2007 +0800
+
+ This is a framebuffer driver for ATI video card, can work for PCI9200,
+ X300, X700, X800 ATI video cards.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 5728be389e65fd47f34b33c2596271eb4db751ae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 6 01:01:49 2007 +0200
+
+ Coding style cleanup. Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8092fef4c29b395958bb649647da7e3775731517
+Author: Martin Krause <Martin.Krause@tqs.de>
+Date: Tue Dec 12 14:26:01 2006 +0100
+
+ Add functions to list of exported functions
+
+ Additionally export the following fuctions (to make trab_config build again):
+ - simple_strtol()
+ - strcmp()
+
+ Also bump the ABI version to reflect this change
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 63cec5814fab5d2b1c86982327433807a5ac0249
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Aug 2 14:09:49 2007 -0500
+
+ Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
+
+ All of the PCI/PCI-Express driver and initialization code that
+ was in the MPC8641HPCN port has now been moved into the common
+ drivers/fsl_pci_init.c. In a subsequent patch, this will be
+ utilized by the 85xx ports as well.
+
+ Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
+
+ Also enable the second PCI-Express controller on 8641
+ by getting its BATS and CFG_ setup right.
+
+ Fixed a u16 vendor compiler warning in AHCI driver too.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 86b116b1b1e165ca4840daefed36d2e3b8460173
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Aug 3 12:08:16 2007 +0200
+
+ cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
+
+ Add the ability for modules from the Schindler cm5200 family to use a
+ single U-Boot image:
+ - rename cm1_qp1 to cm5200
+ - add run-time module detection
+ - parametrize SDRAM configuration according to the module we are running on
+
+ Few minor, board-specific fixes included in this patch:
+ - better MAC address handling
+ - updated default environment ('update' command uses +{filesize} now)
+ - improved error messages in the auto-update code
+ - allow booting U-Boot from RAM (CFG_RAMBOOT)
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Aug 3 04:05:25 2007 -0500
+
+ Add Marvell 1149 PHY support to the TSEC
+
+commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 2 21:27:46 2007 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 63e22764d2f8653f68888c667eb65b3996b52680
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 2 10:11:18 2007 +0200
+
+ Minor cleanup of <board>_nand build rules.
+
+commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 2 00:48:45 2007 +0200
+
+ Fix build errors and warnings / code cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jul 27 14:43:59 2007 +0200
+
+ [ADS5121] Support for the ADS5121 board
+
+ The following MPC5121e subsystems are supported:
+
+ - low-level CPU init
+ - NOR Boot Flash (common CFI driver)
+ - DDR SDRAM
+ - FEC
+ - I2C
+ - Watchdog
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+
+commit 1863cfb7b100ba0ee3401799457a01dc058745f8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jul 27 14:22:04 2007 +0200
+
+ [PPC] Remove unused MSR_USER definition
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit cc3023b9f95d7ac959a764471a65001062aecf41
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Thu Jul 19 17:12:28 2007 +0200
+
+ Fix breakage of 8xx boards from recent commit.
+
+ This patch fixes the negative consequences for 8xx of the recent
+ "ppc4xx: Clean up 440 exceptions handling" commit.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 3a6cab844cf74f76639d795e0be8717e02c86af7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 14 22:51:02 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 011595307731a7a67a7445d107c279d031e8ab97
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sat Jul 14 01:06:58 2007 +0200
+
+ [PCS440EP] - fix compile error, if BUILD_DIR is used
+
+commit fad63407154f46246ce80d53a9c669a44362ac67
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jul 13 09:54:17 2007 +0200
+
+ make show_boot_progress () weak.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 907902472391b6ca1876ec300687562ecaf459b1
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jul 13 08:26:05 2007 +0200
+
+ [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
+ - fix compile error, if BUILD_DIR is used
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 12 01:45:34 2007 +0200
+
+ Update CHANGELOG, minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Jun 8 16:41:18 2007 -0500
+
+ Remove erroneous errata code from Marvel 88E1111S driver
+
+ The Marvel 88E1111S driver for the TSEC was copied from the
+ 88E1101 driver, and included a fix for an erratum which does not
+ exist on that part. Now it is removed
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Jun 5 16:38:44 2007 -0500
+
+ From: eran liberty <eran.liberty@gmail.com>
+
+ adds the reset register to 85xx immap
+
+ Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu May 10 17:50:01 2007 -0500
+
+ Polished the 85xx ADS config files
+
+ Made the boot commands use device trees by default.
+ Also moved the ramdisk to 1000000 (I think the previous address
+ was getting overridden during boot).
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed May 9 11:03:32 2007 -0500
+
+ 8544ds: Fix Makefile after moving pixis to board/freescale.
+
+ The OBJTREE != SRCTREE build scenario was broken.
+ This fixes it.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed May 9 00:54:20 2007 -0500
+
+ tsec: Fix PHY code to match first driver
+
+ Jarrold Wen noticed that the generic PHY code always matches
+ under the current implementation. Change it so the first match
+ wins, and *only* unknown PHYs trigger the generic driver
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ccc091aac61a38cd998d575d92f7232e256d6312
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue May 8 17:27:43 2007 -0500
+
+ Add support for CPM device tree configuration to 8560 ADS
+
+ * Adds code to modify CPM frequencies
+ * Cleans up the config file to #define TSEC and (for now) #undef FCC
+ * Adds the MII command for all 8560 ADS configurations
+ * Updates config file to provide convenience commands for booting
+ with a device tree
+
+ Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue May 8 17:23:02 2007 -0500
+
+ Fix Marvell 88e1145 PHY init code
+
+ Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
+ where the reset was being done after the errata code instead of
+ before.
+
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 5dc210dec5bace98a50b6ba905347890091a9bb0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:52:16 2007 -0500
+
+ Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:52:08 2007 -0500
+
+ pciauto setup bridge
+
+ The P2P bridge bus numbers programmed into the device are relative to
+ hose->first_busno.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 571f49fa717004ca4268b4e24057efc7bf9f987b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:52:01 2007 -0500
+
+ Support PCIe extended config registers
+
+ FSL PCIe block has extended cfg registers in the 100 and 400 range.
+ For example, to read the LTSSM register: pci display <busn>.0 404 1
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit ba5feb12581bb2912ce301e4866b71f846e9fc07
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:51:48 2007 -0500
+
+ Minor improvements to drivers/pci_auto.c
+
+ - Make pciauto_{pre,post}scan_setup_bridge non-static
+ - Added physical address display in debug messages.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 40e81addab7bb74d20ddf681ce9babc880a828ee
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Jul 11 14:51:35 2007 -0500
+
+ Start pci hose scan from hose->current_busno.
+
+ Ensure hose->current_busno is not less than first_busno. This fixes
+ broken board code which leaves current_busno=0 when first_busno is
+ greater than 0 for the cases with multiple controllers.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 3865b1fb7843a08ad49a6319a36415752276ff48
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 11 12:13:53 2007 +0200
+
+ Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fa1df308926a6f70e3504c57514ef27ac31fd13a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Jul 11 20:11:07 2007 +0200
+
+ CM1.QP1: Support for the Schindler CM1.QP1 board.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Wed Jul 11 18:39:11 2007 +0200
+
+ [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
+ - now the Flash ST M29W040B is supported (not tested)
+ - fix the "led" command
+ - fix compile error, if BUILD_DIR is used
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Jul 8 13:44:27 2007 +0200
+
+ Fix malloc problem introduced with the relocation fixup for the PPC platform
+
+ The relocation fixup didn't handle the malloc pointer initialization
+ correctly. This patch fixes this problem. Tested successfully on 4xx.
+ The relocation fixup patches for 4xx will follow soon.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:19:50 2007 -0500
+
+ disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:13:21 2007 -0500
+
+ drivers/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f40a7f3e3888b42a43674b099e5470022c8c544c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:07:56 2007 -0500
+
+ fs/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:05:02 2007 -0500
+
+ net/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 902531788376046da212afd1661cffb62f3daa1c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 11:02:44 2007 -0500
+
+ common/: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d39b57415838c73fb0a37eca84de3c68ba990586
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:48:22 2007 -0500
+
+ board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 77a318545d57aefa844752465b94c7e09a3f26d0
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:39:10 2007 -0500
+
+ board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
+
+ Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+ Those always evaluated TRUE, and thus were always compiled
+ even when IDE really wasn't defined/wanted.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:27:39 2007 -0500
+
+ cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 079a136c3588814784561d6e4856970ee82d6e2a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 10:12:10 2007 -0500
+
+ include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:38:02 2007 -0500
+
+ include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:29:01 2007 -0500
+
+ include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:22:23 2007 -0500
+
+ include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:10:49 2007 -0500
+
+ include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Jul 10 09:02:57 2007 -0500
+
+ include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+ Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+ used to be included but CONFIG_BOOTP_MASK was not defined.
+
+ Remove lingering references to CFG_CMD_* symbols.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 22:08:34 2007 -0500
+
+ Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
+
+ All of the choices for CONFIG_BOOTP_ are now documented in
+ the README file. You must now individually select exactly
+ the set that you want using a series of
+ #define CONFIG_BOOTP_<x>
+ statements in the board port config files now.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d3b8c1a743dcd31625c99e6a44590f207eb00028
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:57:31 2007 -0500
+
+ include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2fd90ce575b02d189cbf443c85309bcd001aa393
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:48:26 2007 -0500
+
+ include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 37d4bb70586659dedef1658ce1bed071be098aec
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:38:02 2007 -0500
+
+ include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 18225e8dd1950bd6dbf35011e436db7f474c187d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:31:24 2007 -0500
+
+ include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:24:19 2007 -0500
+
+ include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 21:16:53 2007 -0500
+
+ include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 19:12:30 2007 -0500
+
+ Retire CONFIG_COMMANDS finally.
+ Strip old CFG_CMD_* symbols out.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b5501f7d720fed99ab0b42c83f5dea52868ce007
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 19:10:03 2007 -0500
+
+ Update README.* to reference new CONFIG_CMD_* names now.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 19:06:00 2007 -0500
+
+ cpu/m*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:57:22 2007 -0500
+
+ cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ab3abcbabd840928fb1eb5122118ca466b5e5013
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:45:16 2007 -0500
+
+ board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:38:39 2007 -0500
+
+ board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c508a4cefd8a953fc64957650506a035e6e3d9d1
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:31:28 2007 -0500
+
+ board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:24:55 2007 -0500
+
+ board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fcec2eb93e126400009729328e797f12bc94f1fd
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:19:09 2007 -0500
+
+ board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a593814f2be0c9cdc3133cd550b167b8a988328f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:10:50 2007 -0500
+
+ rtc/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 67350568f9d46e66c21829f3513b3db0caeb948b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:05:38 2007 -0500
+
+ lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7def6b34f910f08d7ef0a14646da067719237ca2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 18:02:11 2007 -0500
+
+ lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:56:50 2007 -0500
+
+ fs/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c91898bbc505aff3e12a807af88e76da18efb7ee
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:46:09 2007 -0500
+
+ tools/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:45:14 2007 -0500
+
+ net/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:39:42 2007 -0500
+
+ drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:30:01 2007 -0500
+
+ drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:22:37 2007 -0500
+
+ disk/: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 639221c76c88215bd55af83ad174fc30d1940f8f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Jul 9 17:15:49 2007 -0500
+
+ include/: Remove obsolete references to CONFIG_COMMANDS
+ Mostly removed from comments here.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 10 00:01:28 2007 +0200
+
+ Coding style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c3517f919d0f61650cf3027fd4faf0f631142f6c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 18:10:08 2007 -0500
+
+ common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 18:05:39 2007 -0500
+
+ common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c76fe47425afc7d5d670ff0539823c85d65d9c42
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 18:02:23 2007 -0500
+
+ common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit baa26db4113679b80970ff447d91cc10217742a6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 17:51:39 2007 -0500
+
+ common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 17:02:01 2007 -0500
+
+ Clear up confusion over the CMD_POST and POST_DIAG mess.
+
+ For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
+ when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
+ Clear this mess up some.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b3631487105a57ab7cbadfc26efbaf9676275018
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:45:08 2007 -0500
+
+ Remove references to the old cmd_confdefs.h include file.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:42:59 2007 -0500
+
+ include/configs: Catch some CONFIG_CMD_* conversion stragglers.
+
+ Use new CONFIG_CMD_* in lwmon5.h board config file.
+ Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5562901661bd428f7e5feb333f796372cb81019
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:31:57 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:02:44 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various S* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 15:12:40 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various R* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:55:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:49:44 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various P* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:21:43 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 14:14:17 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various M* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 348f258f24253433e4a2302a0bbceb6740a67246
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 13:46:18 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sun Jul 8 10:09:35 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various H* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 60a0876b5106b34220e459c208bbf648073306c0
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sat Jul 7 21:04:26 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit dcaa71562826a2466e894c868d132509dcda8444
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sat Jul 7 20:56:05 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various E* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3c3227f3c737502311b25b72084573901cbbf17d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Sat Jul 7 20:40:43 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various D* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jul 5 19:52:35 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various C* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jul 5 19:32:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various B* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 498ff9a228485bd4b9f23d066bada268f9add1dd
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Jul 5 19:13:52 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various A* named board config files.
+
+ Since ADS860.h includes "board/fads/fads.h" with ramifications
+ on the CONFIG_COMMAND treatment, it too has to be adjusted to
+ exclude already configured commands in this same commit.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 6 09:45:47 2007 +0200
+
+ Fix problem with get/setdcr commands introduced by cfg patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 6 02:50:19 2007 +0200
+
+ Code cleanup and default config update for STC GP3 SSA board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e4dbe1b215f5c6c462e76909d240bd96472b84de
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 5 17:56:27 2007 +0200
+
+ Fixing some typos etc. introduced mainly by cfg patches.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 5 11:12:16 2007 +0200
+
+ Minor coding style cleanup. Update CHANGELOG.
+
+commit dca3b3d6d6396b67e5e84af53452164923c73443
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:46 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:38 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:30 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various s* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:23 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 26a34560d56a9df5bc2ae23525d9229736134757
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:17 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various p* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5cb23092a7d31490a33d4ec871468b63babfa3c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:13 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various o* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various n* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:33:01 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various m* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:57 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various l* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:51 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:32 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various i* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:25 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various h* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:19 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various g* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:10 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various e* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:32:03 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various d* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:56 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various c* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:49 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various b* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0b361c916617aff79e647b40f0e43361e0bbaccf
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:42 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various a* named board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b730cda82e362df6a22f4c59c0a9b97e885b1014
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:35 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d794cfefead5fc177cf4f41164e80382e9c9484a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:15 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:31:07 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in STx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:58 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in sbc* board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2694690e285acaa34922f55f4b5ae030da60c55a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:50 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in TQM board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1cc4c458329765b58e584a19821e796b3c10e976
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:28 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in 82xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jul 4 22:30:06 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in 83xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b44896215a09c60fa40cae906f7ed207bbc2c492
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Jul 5 08:17:37 2007 +0200
+
+ Merged POST framework with the current TOT.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit b24629fa377214d63bb40d1360e354b6d3e4af56
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:23:15 2007 -0500
+
+ mpc86xx: Remove old CFG_CMD_* references.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:22:54 2007 -0500
+
+ Add MPC8568MDS to MAKEALL 85xx target.
+
+ It was missing from the original port submission.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:22:08 2007 -0500
+
+ include/configs: Use new CONFIG_CMD_* in 85xx board config files.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 56b304ac2091689506088a9ae67f63fd6300cf16
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Wed Jun 13 13:21:37 2007 -0500
+
+ Fix #if typo in CONFIG_CMD_* changes.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f780b83316d9af1f61d71cc88b1917b387b9b995
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Wed Jun 27 18:11:38 2007 +0200
+
+ resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 4 10:06:30 2007 +0200
+
+ ppc4xx: Update lwmon5 board
+
+ - Add optional ECC generation routine to preserve existing
+ RAM values. This is needed for the Linux log-buffer support
+ - Add optional DDR2 setup with CL=4
+ - GPIO50 not used anymore
+ - Lime register setup added
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6810a34677dbc446334f5e451f1682426dd33b49
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:17:28 2007 -0600
+
+ Fix Makefile to use $(MKCONFIG) macro for all board ports
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:17:28 2007 -0600
+
+ Fix Makefile to use $(MKCONFIG) macro for all board ports
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 057004f4a4863554d56cc56268bfa7c7d9738e27
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:49 2007 -0600
+
+ Correct fixup relocation for mpc83xx
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:44 2007 -0600
+
+ Correct fixup relocation for mpc8260
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f3a52fe05923935db86985daf9438e2f70ac39aa
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:39 2007 -0600
+
+ Correct fixup relocation for mpc824x
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:34 2007 -0600
+
+ Correct fixup relocation for mpc8220
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:29 2007 -0600
+
+ Correct fixup relocation for MPC5xxx
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 3649cd99ba815b6601868735765602f00ef3692b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:24 2007 -0600
+
+ Correct relocation fixup for mpc5xx
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:19 2007 -0600
+
+ Don't set gd->reloc_off if relocation of .fixup works correctly
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:14 2007 -0600
+
+ Remove obsolete mpc83xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:09 2007 -0600
+
+ Consolidate mpc8260 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:34:04 2007 -0600
+
+ Remove obsolete mpc824x linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:59 2007 -0600
+
+ Remove obsolete mpc824x linker scripts (3 of 4)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a71c084f3ac7fedf144537db2b2da47323068833
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:53 2007 -0600
+
+ Remove obsolete mpc824x linker scripts (2 of 4)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f670a15468d1365241d40022b9408e1004181f5e
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:48 2007 -0600
+
+ Remove obsolete mpc824x linker scripts (1 of 4)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 09555bd45a04c0e54f172528d21bc18896550d28
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:43 2007 -0600
+
+ Remove obsolete mpc8220 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5efb992f046e51225c93d52f80fecbe433abd789
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:38 2007 -0600
+
+ Remove obsolete mpc5xxx linker scripts (3 of 3)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 07c13dfef65b31647e69d8b61daa1eec598add1a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:33 2007 -0600
+
+ Remove obsolete mpc5xxx linker scripts (2 of 3)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:28 2007 -0600
+
+ Remove obsolete mpc5xxx linker scripts (1 of 3)
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b7d8e05f8675249b5f208aa73babeed384a4519d
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:23 2007 -0600
+
+ Remove obsolete mpc5xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:18 2007 -0600
+
+ Consolidate mpc83xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:13 2007 -0600
+
+ Consolidate mpc8260 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:08 2007 -0600
+
+ Consolidate mpc824x linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 9c757b789a59a855db57b448dd825329c4e9c4a0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:33:03 2007 -0600
+
+ Consolidate mpc8220 linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit d181c9a15cd41863fe24840d17848429f27d3c8c
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:32:58 2007 -0600
+
+ Consolidate mpc5xxx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 287ac924adb7291bebe5086652a362a30ab28b13
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Jul 3 00:32:53 2007 -0600
+
+ Consolidate mpc5xx linker scripts
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 4 00:43:53 2007 +0200
+
+ Fix a few file permission problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 4 00:38:38 2007 +0200
+
+ Minor coding style cleanup. Rebuild CHANGELOG file.
+
+commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:44 2007 -0500
+
+ configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 602ad3b33d9ceef83dbab46be68646d645d637ee
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:39 2007 -0500
+
+ README: Rewrite command line config to use CONFIG_CMD_* names.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 72a074cec68e5bad60d63206c050974e08afd804
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:34 2007 -0500
+
+ include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:28 2007 -0500
+
+ tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9107ebe0d352420895ab69b715697bdebc8caf50
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:23 2007 -0500
+
+ board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5e378003d592ea828ec69d6defcd4de79096dd5c
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:19 2007 -0500
+
+ board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 737184114ec9c9e0ab94d6713536126073bd2472
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:15 2007 -0500
+
+ cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f48070fe5fe440dfb5ee5268c920de70e48ea327
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:08 2007 -0500
+
+ cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:03:03 2007 -0500
+
+ lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:58 2007 -0500
+
+ lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 98b79003c21c2578206003256de4e781d6b36ca8
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:53 2007 -0500
+
+ rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6e2115acb6a892d53a6881bf253ae41d3df39156
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:49 2007 -0500
+
+ net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 45cdb9b72c94655c7308b464a2666057c0b286e0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:34 2007 -0500
+
+ disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:20 2007 -0500
+
+ fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d5be43de93ff905c465e509d45a3164ef48d26e7
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:10 2007 -0500
+
+ drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b453960d4fdb87b3970d96119b90df2ed024fc4a
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:02:05 2007 -0500
+
+ common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:01:54 2007 -0500
+
+ common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a76adc8142c1d956385a109e0b70f9319ede4d66
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:01:43 2007 -0500
+
+ common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+ This is a compatibility step that allows both the older form
+ and the new form to co-exist for a while until the older can
+ be removed entirely.
+
+ All transformations are of the form:
+ Before:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+ After:
+ #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
+Author: Jon Loeliger <jdl@jdl.com>
+Date: Mon Jun 11 19:01:34 2007 -0500
+
+ Introduce initial versions of new Command Config files.
+
+ Derive three new files from cmd_confdefs.h:
+ config_bootp.h - Has BOOTP related config options, not commands
+ config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
+ config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
+
+ For now, include "config_bootp.h" for compatability until all
+ users of it directly include it properly.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1f2a05898658900dc5717761e27abf2052e67e13
+Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
+Date: Sat Jun 30 18:50:48 2007 +0200
+
+ Fix S-ATA support.
+
+ Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
+
+commit a5d71e290f3673269be8eefb4ec44f53412f9461
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Mon Jun 25 19:11:37 2007 +0200
+
+ [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date: Mon Jun 25 17:03:13 2007 +0200
+
+ ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
+
+ This patch prints the DDR status registers upon machine check
+ interrupt on the 440EPx/GRx. This can be useful especially when
+ ECC support is enabled.
+
+ I added some small changes to the original patch from Niklaus to
+ make it compile clean.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 807018fb7faceb429ce0cb47baa2073746b33a4e
+Author: Niklaus Giger <niklaus.giger@nestal.com>
+Date: Mon Jun 25 16:50:55 2007 +0200
+
+ ppc4xx: Fix O=buildir builds
+
+ This patch fixes the problem to assemble cpu/ppc4xx/start.S
+ experienced last week where building failed having specified
+ O=../build.sequoia.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 466fff1a7bb5fe764a06450626f6098219f446b8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 25 15:57:39 2007 +0200
+
+ ppc4xx: Add pci_pre_init() for 405 boards
+
+ This patch removes the CFG_PCI_PRE_INIT option completely, since
+ it's not needed anymore with the patch from Matthias Fuchs with
+ the "weak" pci_pre_init() implementation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f35c53166213c24a5a0e2390ed861136ff73870
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Jun 24 17:41:21 2007 +0200
+
+ ppc4xx: Maintenance patch for esd's CPCI405 derivats
+
+ -add pci_pre_init() for pci interrupt fixup code
+ -disable phy sleep mode via reset_phy() function
+ -use correct io accessors
+ -cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Jun 24 17:23:41 2007 +0200
+
+ ppc4xx: Add pci_pre_init() for 405 boards
+
+ This patch adds support for calling a plattform dependant
+ pci_pre_init() function for 405 boards. This can be used to
+ move the current pci_405gp_fixup_irq() function into the
+ board code.
+
+ This patch also makes the CFG_PCI_PRE_INIT define obsolete.
+ A default function with 'weak' attribute is used when
+ a board specific pci_pre_init() is not implemented.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 22 23:59:00 2007 +0200
+
+ Coding stylke cleanup; rebuild CHANGELOG
+
+commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Apr 18 14:55:19 2007 +0400
+
+ Adapt log buffer code to support Linux 2.6
+
+ A new environment variable, "logversion", selects the log buffer
+ behaviour. If it is not set or set to a value other than 2, then the
+ old, Linux 2.4.4, behaviour is selected.
+
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
+
+commit a11e06965ec91270c51853407ff1261d3c740386
+Author: Igor Lisitsin <igor@emcraft.com>
+Date: Wed Mar 28 19:06:19 2007 +0400
+
+ Extend POST support for PPC440
+
+ Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
+
+ Signed-off-by: Igor Lisitsin <igor@emcraft.com>
+ --
+
+commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Fri Jun 22 19:11:54 2007 +0200
+
+ [PCS440EP] upgrade the PCS440EP board:
+ - Show on the Status LEDs, some States of the board.
+ - Get the MAC addresses from the EEProm
+ - use PREBOOT
+ - use the CF on the board.
+ - check the U-Boot image in the Flash with a SHA1
+ checksum.
+ - use dynamic TLB entries generation for the SDRAM
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3a1f5c81b0b9557817a789bece839905581c2205
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 22 16:58:40 2007 +0200
+
+ ppc4xx: Fix problem with extended program_tlb() funtion
+
+ The recently extended program_tlb() function had a problem when
+ multiple TLB's had to be setup (for example with 512MB of SDRAM). The
+ virtual address was not incremented. This patch fixes this issue
+ and is tested on Katmai with 512MB SDRAM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jun 22 14:58:04 2007 +0200
+
+ [ppc] Fix build breakage for all non-4xx PowerPC variants.
+
+ - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
+ - minor 4xx cleanup
+
+commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 20 18:14:24 2007 +0200
+
+ Coding style cleanup. Refresh CHANGELOG.
+
+commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 17:22:44 2007 +0200
+
+ ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
+
+ This patch adds a board command to configure the I2C bootstrap EEPROM
+ values. Right now 533 and 667MHz are supported for booting either via NOR
+ or NAND FLASH. Here the usage:
+
+ => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
+ => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 16:42:31 2007 +0200
+
+ [ppc4xx] Fix problem with NAND booting on AMCC Acadia
+
+ The latest changes showed a problem with the location of the NAND-SPL
+ image in the OCM and the init-data area (incl. cache). This patch
+ fixes this problem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 86ba99e34194394052d24c04dc40d1263d29a26f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 19 16:40:58 2007 +0200
+
+ [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 11:33:41 2007 +0200
+
+ [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
+
+ Now CONFIG_440 has to be defined in all PPC440 board config files.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit efa35cf12d914d4caba942acd5a6c45f217de302
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 15 11:19:28 2007 +0200
+
+ ppc4xx: Clean up 440 exceptions handling
+
+ - Introduced dedicated switches for building 440 and 405 images required
+ for 440-specific machine instructions like 'rfmci' etc.
+
+ - Exception vectors moved to the proper location (_start moved away from
+ the critical exception handler space, which it occupied)
+
+ - CriticalInput now serviced (with default handler)
+
+ - MachineCheck properly serviced (added a dedicated handler and return
+ subroutine)
+
+ - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
+ unhandled and those not relevant for 4xx were eliminated)
+
+ - Eliminated Linux leftovers, removed dead code
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 08:18:01 2007 +0200
+
+ [ppc4xx] Add initial lwmon5 board support
+
+ This patch adds initial support for the Liebherr lwmon5 board euqipped
+ with an AMCC 440EPx PowerPC.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 85f737376d5ff3d5f0d45a8b657686326d175307
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 15 07:39:43 2007 +0200
+
+ [ppc4xx] Extend 44x GPIO setup with default output state
+
+ The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
+ is extended with the default GPIO output state (level).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 14 11:14:32 2007 +0200
+
+ [ppc4xx] Extend program_tlb() with virtual & physical addresses
+
+ Now program_tlb() allows to program a TLB (or multiple) with
+ different virtual and physical addresses. With this change, now one
+ physical region (e.g. SDRAM) can be mapped 2 times, once with caches
+ diabled and once with caches enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 23 19:02:41 2007 +0200
+
+ Change 'repeatable' attribute of some commands to sensible values.
+
+ Most prominently this changes 'erase' to be non-repeatable.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5afb202093f6a001797db92cf695b93a70ea9ab4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 23 18:47:48 2007 +0200
+
+ Fix 'run' not to continue after interrupted command
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 9b7464a2c88614e1061f509c48930a3d240d1a35
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Mon Jun 11 15:14:24 2007 +0200
+
+ USB: This patch fix readl in ohci swap reg access.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Jun 8 14:52:22 2007 +0200
+
+ TQM5200: Add Flat Device Tree support, update default env. accordingly.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9045f33c023f698660a2e45d1b2194c0711abebc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 8 10:24:58 2007 +0200
+
+ Fix config problems on SC3 board; make ide_reset_timeout work.
+
+commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Fri Jun 8 09:55:24 2007 +0200
+
+ [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
+
+ Set the correct value in GPIOx_TCR when configuring the gpio
+ with CFG_440_GPIO_TABLE.
+
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f539edc076cfe52bff919dd512ba8d7af0e22092
+Author: Vadim Bendebury <vbendeb@google.com>
+Date: Thu May 24 15:52:25 2007 -0700
+
+ cosmetic changes to bcm570x driver
+
+ This is a cosmetic only changes submission.
+ It affects files relevant to bcm570x driver.
+ the commands used to generate this change was
+
+ cd drivers
+ Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
+
+ The BMW target (the only one using this chip so far) builds cleanly, the
+ `before and after' generated object files for drivers/bcm570x.c and
+ drivers/tigon3.o are identical as reported by objdump -d
+
+ Signed-off-by: Vadim Bendebury <vbendeb@google.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
+commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 6 16:26:56 2007 +0200
+
+ Coding Style cleanup; generate new CHANGELOG file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:44 2007 +0200
+
+ TRAB, USB: update trab board configuration for use of generic ohci driver
+
+commit dace45acd1c1357daa9322099d07c9a9e08b0024
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:43 2007 +0200
+
+ USB: ohci fixes and cleanup for ppc4xx and yosemite board.
+
+commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:43 2007 +0200
+
+ USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
+
+commit fc43be478f2aa37ce38acd85355038866e4162af
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 11:49:35 2007 +0200
+
+ USB/OHCI: endianness cleanup in the generic ohci driver
+
+commit c440bfe6d6d92d66478a7e84402b31f48413617b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 6 11:42:13 2007 +0200
+
+ ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
+
+ This patch adds NAND booting support for the AMCC Acadia eval board.
+
+ Please make sure to configure jumper J7 to position 2-3 when booting
+ from NOR, and to position 1-2 when booting for NAND.
+
+ I also added a board command to configure the I2C bootstrap EEPROM
+ values. Right now only 267MHz is support for booting either via NOR
+ or NAND FLASH. Here the usage:
+
+ => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
+ => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
+Author: Rodolfo Giometti <giometti@linux.it>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ Files include/linux/byteorder/{big,little}_endian.h define
+ __BIG_ENDIAN and __LITTLE_ENDIAN.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ Add USB PCI-OHCI, USB keyboard and event poll support to the
+ MPC8641HPCN board config file.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:14 2007 +0200
+
+ USB PCI-OHCI, interrupt pipe and usb event poll support
+
+ This patch added USB PCI-OHCI chips support, interrupt pipe support
+ and usb event poll support. For supporting the USB interrupt pipe, the
+ globe urb_priv is moved to purb in ed struct. Now, we can process
+ several urbs at one time. The interrupt pipe support codes are ported
+ from Linux kernel 2.4.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+
+commit fdcfaa1b02268b2899e374b35adf936c911a47eb
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Wed Jun 6 10:08:13 2007 +0200
+
+ USB event poll support
+
+ This patch adds USB event poll support, which could be used in usbkbd
+ and other usb devices driver when the asynchronous interrupt
+ processing is supported.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com
+
+commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
+Author: Rodolfo Giometti <giometti@linux.it>
+Date: Wed Jun 6 10:08:12 2007 +0200
+
+ ISP116x: delay for crappy USB keys
+
+ Using some (very) slow USB keys cause the USB host controller buffers
+ are not ready to be read by the CPU so we need an extra delay before
+ reading the USB storage data.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit 09444143670c9c2243cb7aba9f70b3713d33bed1
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Jun 6 10:08:12 2007 +0200
+
+ Change duplicate usb_cpu_init_fail to usb_board_init_fail
+
+ Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
+ this out.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Jun 5 12:30:52 2007 -0500
+
+ mpc8641 image size cleanup
+
+ e600 does not have a bootpg restriction.
+ Move the version string to beginning of image at fff00000.
+ Resetvec.S is not needed.
+ Update flash copy instructions.
+ Add tftpflash env variable
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
+Author: Benoît Monin <bmonin@adeneo.eu>
+Date: Mon Jun 4 08:36:05 2007 +0200
+
+ [PATCH] Fix ppc4xx bootstrap letter displayed on startup
+
+ The attached patch is mainly cosmetic, allowing u-boot to
+ display the correct bootstrap option letter according to the
+ datasheets.
+
+ The original patch was extended with 405EZ support by Stefan
+ Roese.
+
+ Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5b1313fb2758ffce8b624457f777d8cc6709608d
+Author: Nikita V. Youshchenko <yoush@debian.org>
+Date: Wed May 23 12:45:19 2007 +0400
+
+ fix compilation problem for mpc8349itx CFG_RAMBOOT
+
+ Current include/configs/MPC8349ITX.h does contain some support for building
+ image that will be started from memory (without putting in into flash).
+ It could be triggered by building with TEXT_BASE set to a low value.
+
+ However, this support is incomplete: using of low TEXT_BASE causes
+ defining configuration macros in inconsistent way, which later leads
+ to compilation errors. In particular. flash support is being disabled,
+ but then flash structures get referenced.
+
+ This patch fixes this, making it possible to build with low TEXT_BASE.
+
+ Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8a364f0970de49949d635e60accf463c6443ef8c
+Author: Nikita V. Youshchenko <yoush@debian.org>
+Date: Wed May 23 12:45:25 2007 +0400
+
+ add missing 'console' var to default mpc8349itx config
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 16:18:17 2007 +0200
+
+ ppc4xx: Add missing file for Bamboo NAND booting support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:58:19 2007 +0200
+
+ ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
+
+ This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
+ suggested by AMCC it is not recommended to dynamically change the EBC
+ speed after bootup. So we undo this change to be on the safe side.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:29:04 2007 +0200
+
+ ppc4xx: Update Sequoia NAND booting support with ECC
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:27:11 2007 +0200
+
+ ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
+
+ This patch adds NAND booting support for the AMCC Bamboo eval board.
+ Since the NAND-SPL boot image is limited to 4kbytes, this version
+ only supports the onboard 64MBytes of DDR. The DIMM modules can't be
+ supported, since the setup code for I2C DIMM autodetection and
+ configuration is too big for this NAND bootloader.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42be56f53c8b107868e6125c8524ae84293e95a7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:23:04 2007 +0200
+
+ NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
+
+ The U-Boot NAND booting support is now extended to support ECC
+ upon loading of the NAND U-Boot image.
+
+ Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a471db07fbb65a841ffc9f4f112562b945230f98
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:19:29 2007 +0200
+
+ ppc4xx: Prepare Bamboo port for NAND booting support
+
+ This patch updates the "normal" Bamboo NOR booting port, so
+ that it is compatible with the coming soon NAND booting
+ Bamboo port.
+
+ It also enables the 2nd NAND flash on the Bamboo.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:16:58 2007 +0200
+
+ ppc4xx: Update in_be32() functions and friends to latest Linux version
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:15:12 2007 +0200
+
+ NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
+
+ This patch adds hardware ECC support to the NDFC driver. It also
+ changes the register access from using the "simple" in32/out32
+ functions to the in_be32/out_be32 functions, which make sure
+ that the access is correctly synced. This is the only recommended
+ access to SoC registers in the current Linux kernel.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:12:15 2007 +0200
+
+ NAND: Update nand_ecc.c to latest Linux version
+
+ This patch updates the nand_ecc code to the latest Linux version.
+ The main reason for this is the more compact code. This makes
+ it possible to include the ECC code into the NAND bootloader
+ image (NAND_SPL) for PPC4xx.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 15:09:50 2007 +0200
+
+ ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:24 2007 +0200
+
+ ppc4xx: Change Luan config file to support ECC
+
+ With the updated 44x DDR2 driver the Luan board now supports
+ ECC generation and checking.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7187db73491c8de0fb56efb5e5134ba5ec443089
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 1 13:45:00 2007 +0200
+
+ ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
+
+ Add config option for 180 degree advance clock control as needed
+ for the AMCC Luan eval board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ee1529838abbfaa35f14e3ffbeaaba693159475f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 31 17:20:09 2007 +0200
+
+ Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7049288fb1f16f1b317140226cdebd07bd416395
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:26:46 2007 +0200
+
+ Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4520fd4d2c450da49637216aa0e53739b61c60ac
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:06:36 2007 +0200
+
+ Motion-PRO: Add support for redundant environment.
+
+ Enable redundant environment, add a MTD partition for it; also add env.
+ variable command for passing MTD partitions to the kernel command line.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a26eabeec31746f06d309103690892805696e344
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:05:11 2007 +0200
+
+ Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
+
+ Allow passing longer command line to the kernel - useful especially
+ for passing MTD partition layout.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 9160b96f71483a116de81c68985e8ee306d36764
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:04:18 2007 +0200
+
+ Fix: Add missing NULL termination in strings expanded by macros parser.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 630ec84aef7228fc1dbfb38dec78541403a786cd
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 17:03:37 2007 +0200
+
+ Motion-PRO: Update EEPROM's page write bits and write delay.
+
+ Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
+ have a page write capability of two bytes", and "This device offers fast (1ms)
+ byte write". Add 3ms of extra delay.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c00125e07c1ebc125bab40e1e18bceed8be0c162
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:58:45 2007 +0200
+
+ MPC5XXX, Motion-PRO: Fix PHY initialization problem.
+
+ After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
+ networking does not function. This commit switches PHY to TX mode by clearing
+ the FX_SEL bit of Mode Control Register. It also reverses commit
+ 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:57:15 2007 +0200
+
+ Motion-PRO: Add support for the temperature sensor.
+
+ Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:55:23 2007 +0200
+
+ Motion-PRO: Add displaying of CPLD revision information during boot.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c99512d6bd3973f01ca2fc4896d829b46e68f150
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:53:43 2007 +0200
+
+ MPC5xxx: Change names of defines related to IPB and PCI clocks.
+
+ Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
+ them does not cause PCI or IPB clocks to run at the specified speed.
+ Instead, they configure divisors used to calculate said clocks. This
+ patch renames the defines according to their real function.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a11c0b85dc3664bb3c1e781137118730c8f619ab
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Sun May 27 16:51:48 2007 +0200
+
+ Motion-PRO: Add LED support.
+
+ Signed-off-by: Jan Wrobel <wrr@semihalf.com>
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit d756894722c888d09a9fa1df8323753772d3dcce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 09:49:00 2007 +0200
+
+ ppc4xx: Fix small 405EZ OCM initilization bug in start.S
+
+ As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
+ fixes a small bug in the 405EZ OCM initialization. Thanks for
+ spotting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d4a179013d59a76446462e1eb0a969fba63eb81
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 24 08:22:09 2007 +0200
+
+ ppc4xx: Update AMCC Acadia support for board revision 1.1
+
+ This patch updates the Acadia (405EZ) support for the new 1.1 board
+ revision. It also adds support for NAND FLASH via the 4xx NDFC.
+
+ Please note that the jumper J7 must be in position 2-3 for this
+ NAND support. Position 1-2 is for NAND booting only. NAND booting
+ support will follow later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 822d55365bb557e084d0e33625a6dedcc866110b
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed May 23 14:09:46 2007 -0500
+
+ Add LIST_86xx MAKEALL target for PowerPC builds.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9f0077abd69f7a7c756a915b961037302be3e6f2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:48:09 2007 +0200
+
+ ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6f3dfc139a838b0841c151efe00ad47db2366e79
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 22 12:46:10 2007 +0200
+
+ ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
+
+ This patch adds support for 405 PPC's to the 4xx NAND driver
+ ndfc.c. This is in preparation for the new AMCC 405EZ.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10603d76767426be803dadd4fb688b97eb69481c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 21 07:41:22 2007 +0200
+
+ ppc4xx: Fix problem in 405EZ OCM initialization
+
+ As spotted by Bruce Adler this patch fixes an initialization problem
+ for the 405EZ OCM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 16:47:03 2007 +0100
+
+ Reduce line lengths to 80 characters max.
+
+commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:34:07 2007 +0100
+
+ Makefile permissions
+
+commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Fri May 18 14:33:11 2007 +0100
+
+ Makefile permissions
+
+commit 255a3577c848706441daee0174543efe205a77f8
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed May 16 16:52:19 2007 -0500
+
+ Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
+
+ For all practical u-boot purposes, TSECs don't differ throughout the
+ mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 70124c2602ae2d4c5d3dba05b482d91548242de8
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed May 16 14:49:12 2007 +0200
+
+ Fix compile problem cause my Microblaze merge
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit ada4697d0230d6da552867777f98a67ec3ba2579
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Wed May 16 13:23:10 2007 +0200
+
+ [PATCH] Run new sequoia boards with an EBC speed of 83MHz
+
+ Because the Sequoia board does not boot with an EBC faster than 66MHz,
+ the clock divider are changed after the initial boot process.
+
+ This allows for maximum clocking speeds to be achieved on newer boards.
+ Sequoia boards with 666.66 MHz processors require that the EBC divider
+ be set to 3 in order to start the initial boot process at a slower EBC
+ speed. After the initial boot process, the divider can be set back to 2,
+ which will cause the boards to run at 83.333MHz. This is backward
+ compatible with boards with 533.33 MHz processors, as these boards will
+ already be set with an EBC divider of 2.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+
+commit a7676ea7732f3c596805079fed7e5c9fac652cfc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 01:16:53 2007 +0200
+
+ Minor Coding Style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d62f64cc23a940eafe712c776b3249e4160753d1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 16 00:13:33 2007 +0200
+
+ Coding Style Cleanup, new CHANGELOG
+
+commit 3162eb836903c8b247fdc7470dd39bfa6996f495
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 15 23:38:05 2007 +0200
+
+ Minor coding style cleanup.
+
+commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date: Fri Apr 20 14:23:02 2007 +0530
+
+ Add driver for S-ATA-controller on Intel processors with South
+ Bridge, ICH-5, ICH-6 and ICH-7.
+
+ Implementation:
+
+ 1. Code is divided in to two files. All functions, which are
+ controller specific are kept in "drivers/ata_piix.c" file and
+ functions, which are not controller specific, are kept in
+ "common/cmd_sata.c" file.
+
+ 2. Reading and Writing from the S-ATA drive is done using PIO method.
+
+ 3. Driver can be configured for 48-bit addressing by defining macro
+ CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
+ addressing.
+
+ 4. S-ATA read function is hooked to the File system, commands like
+ ext2ls and ext2load file can be used. This has been tested.
+
+ 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
+ controller and identifies the S-ATA drives connected to it.
+
+ 6. U-Boot command "sata" is added, which is used to read/write, print
+ partition table and get info about the drives present. This I have
+ implemented in same way as "ide" command is implemented in U-Boot.
+
+ 7. This driver is for S-ATA in native mode.
+
+ 8. This driver does not support the Native command queuing and
+ Hot-plugging.
+
+ Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
+Author: mushtaq khan <mushtaq_k@procsys.com>
+Date: Mon Apr 30 15:57:22 2007 +0530
+
+ Fixes bug clearing the bss section for i386
+
+ Hi,
+ There is a bug in the code of clearing the bss section for processor
+ i386.(File: cpu/i386/start.S)
+ In the code, bss_start addr (starting addr of bss section) is put into
+ the register %eax, but the code which clears the bss section refers to
+ the addr pointed by %edi.
+
+ This patch fixes this bug by putting bss_start into %edi register.
+
+ Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
+
+commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
+Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
+Date: Mon Apr 30 16:47:28 2007 -0500
+
+ Add support for BCM5464 Quad Phy
+
+ Added support for Broadcom's BCM5464 Quad Phy
+
+ Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Wed May 9 08:10:57 2007 +0800
+
+ Search the exception table with linear algorithm
+
+ Search the exception table with linear algorithm instead of
+ bisecting algorithm.
+ Because the exception table might be unsorted.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
+Author: Aubrey.Li <aubrey.adi@gmail.com>
+Date: Mon May 14 11:47:35 2007 +0800
+
+ Fix compilation issues on MACOSX
+
+ Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
+ Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
+
+commit 56fd7162985c412317bbf763a225fba23c64fd31
+Author: Stephen Williams <steve@icarus.com>
+Date: Tue May 15 07:55:42 2007 -0700
+
+ Fix for compile of JSE target
+
+ The attached patch fixes the compile of the JSE board in the
+ denx git as of 14 may 2007. It is an extremely simple patch,
+ it just adds the missing define of CFG_SYSTEMACE_WIDTH.
+
+ Fix to compile JSE against 20070514 git of u-boot
+
+commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:49 2007 +0200
+
+ ppc4xx: Add mtcpr/mfcpr access macros
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 343c48bd84606c4025c8a7c7263fda465d6e284c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 11 12:01:06 2007 +0200
+
+ ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
+Author: Piotr Kruszynski <ppk@semihalf.com>
+Date: Thu May 10 16:55:52 2007 +0200
+
+ [Motion-PRO] Add MTD and JFFS2 support, also add default partition
+ definition.
+
+commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:42:44 2007 +0100
+
+ Add the board directory for SMN42
+
+commit 160131bf965785419626df6c388729fe0b597992
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:41:58 2007 +0100
+
+ Add the files for the SMN42 board
+
+commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:40:34 2007 +0100
+
+ Remove the deleted files for the SMN42 patch
+
+commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 11:37:56 2007 +0100
+
+ New board SMN42 branch
+
+commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Wed May 9 10:24:38 2007 +0100
+
+ Makefile permissions
+
+commit b84289b595731e8851df46e893845cc1322c9b9b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue May 8 14:17:07 2007 -0500
+
+ 8641hpcn: Fix Makefile after moving pixis to board/freescale.
+
+ The OBJTREE != SRCTREE build scenario was broken.
+ This fixes it.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 15:57:43 2007 +0200
+
+ add: reading special purpose registers
+
+commit 1a50f164beb065f360fbddb76029607d6b099698
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 14:52:52 2007 +0200
+
+ add: Microblaze V5 exception handling
+
+commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue May 8 14:39:11 2007 +0200
+
+ add: FSL control read and write
+
+commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
+Author: Piotr Kruszynski <ppk@semihalf.com>
+Date: Tue May 8 13:05:44 2007 +0200
+
+ [Motion-PRO] Add support for I2C, EEPROM and RTC.
+
+commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 10:23:56 2007 +0200
+
+ [Motion-PRO] Add ATA support. Add CF-booting commands to the default
+ environment.
+
+commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 09:39:12 2007 +0200
+
+ [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
+ eliminates networking problems in Linux (timeouts).
+
+commit 1f1369c34b629be94702684d41d3fddf0f6193e7
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue May 8 09:21:57 2007 +0200
+
+ [Motion-PRO] Enable Flat Device Tree support and modify default environment
+ to allow booting of FDT-expecting kernels.
+
+commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 23:58:31 2007 +0200
+
+ new: USE_MSR_INTR support
+
+commit 008861a2f3ef2c062744d733787c7e530a1b8761
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Mon May 7 22:36:15 2007 +0200
+
+ [MPC5xxx] There are networking problems on the Motion-PRO board with
+ current PHY initalization code (tftp timeouts all the time). This commit
+ temporarily disables PHY initalization sequence to make the networking
+ operational, until a fix is found.
+
+commit abca901869c3760b6c5fecb825db6c1d91a78a93
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 7 22:10:36 2007 +0200
+
+ Get rid of duplicated file (see include/configs/sbc8560.h instead)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 7 22:07:08 2007 +0200
+
+ Get rid of duplicated file (see doc/README.SBC8560 instead)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:43:10 2007 +0200
+
+ fix: read and write MSR - repair number of parameters
+
+commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon May 7 19:42:49 2007 +0200
+
+ [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
+
+ A '3' got cut off in the formatting of the last patch to automatically
+ change the clock speed of the system clock on sequoia board.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:33:51 2007 +0200
+
+ new: fsl interrupt support
+ FSL_Has_data is connected to INTC.
+
+commit 792032baa7d625e34c981ab6df521911bd8dc861
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:30:12 2007 +0200
+
+ fix: interrupt handler
+ remove asm code
+
+commit f3f001a341ef185d0f13841be5b5dc3395aacc31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:25:08 2007 +0200
+
+ fix: remove asm code
+
+commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 19:12:43 2007 +0200
+
+ fix: clean interrupt
+
+commit 42efed6130c8fcf7da881385b5427065d2801757
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 17:22:25 2007 +0200
+
+ fix: interrupt handler for multiple sources
+
+commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon May 7 17:11:09 2007 +0200
+
+ new: add writing to msr register
+
+commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon May 7 16:43:56 2007 +0200
+
+ Fix an ancient CHANGELOG conflict
+
+commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
+Author: Timur Tabi <timur@freescale.com>
+Date: Sat May 5 08:12:30 2007 +0200
+
+ 5xxx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date: Sun Apr 29 14:01:54 2007 +0200
+
+ [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+ MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+ message. Use PVR to distinguish between the two variants, and print proper CPU
+ information.
+
+ Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 25 16:01:26 2007 +0200
+
+ [PATCH] simplify silent console
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Mon Apr 23 15:30:39 2007 +0200
+
+ [PATCH] Avoid assigning PCI resources from zero address
+
+ If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+ core complains and IDE drivers fails to work. Also, assigning zero to a BAR
+ was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+ sentence about "0" being considered an invalid address) -- so, use a reasonable
+ starting value of 0x1000 (that's what the most Linux archs are using).
+
+ Alternatively, one might have fixed the calls to pci_set_region() individually
+ (some code even seems to have taken care of this issue) but that would have
+ been a lot more work. :-)
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon Apr 23 14:00:11 2007 +0200
+
+ [patch] setenv(...) can delete environmentalvariables
+
+ update setenv() function so that entering a NULL value for the
+ variable's value will delete the environmental variable
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 23 13:54:24 2007 +0200
+
+ [patch] use unsigned char in smc91111 driver for mac
+
+ the v_mac variable in the smc91111 driver is declared as a signed char ...
+ this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+ because when it gets printed out, you get a display like:
+ 0xFFFFFFE0 and that's no good
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ffc50f9bb194343c6303517a517708457a5eb6b8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat May 5 18:54:42 2007 +0200
+
+ new: FSL and MSR support #2
+
+commit f7e2e0eb0668136305f78bb9c21be79b48a34247
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat May 5 18:27:16 2007 +0200
+
+ new: FSL and MSR support
+
+commit 2f15278c2eb911c668b4fe562130b78cf554d139
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 18:23:11 2007 +0200
+
+ Coding stylke cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 18:05:02 2007 +0200
+
+ Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 5 17:15:50 2007 +0200
+
+ Make "file" command happy with some config.mk files; update CHANGELOG
+
+commit e3b8c78bc2489c27ae020986ef0eaca684866cef
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Sat May 5 08:32:14 2007 +0200
+
+ ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
+
+ The AMCC Secquoia board has been changed in a new revision from using a
+ 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
+ indicates the difference. This patch reads that bit and uses the correct
+ clock speed for the board. This code is backward compatable will all
+ prior boards. All prior boards will be read as 33.000.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 5 08:29:01 2007 +0200
+
+ ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
+
+ Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
+ for the 4k NAND boot image so define bus_frequency to 133MHz here
+ which is save for the refresh counter setup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2f550ab976405300f5b07bf2890800840d0aa05f
+Author: Timur Tabi <timur@freescale.com>
+Date: Sat May 5 08:12:30 2007 +0200
+
+ 5xxx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a79886590593ba1d667c840caa4940c61639f18f
+Author: Thomas Knobloch <knobloch@siemens.com>
+Date: Sat May 5 07:04:42 2007 +0200
+
+ NAND: Wrong calculation of page number in nand_block_bad()
+
+ In case that there is no memory based bad block table available the
+ function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
+ nand_block_bad() directly. When parameter 'getchip' is set to zero,
+ nand_block_bad() will not right shift the offset to calculate the
+ correct page number.
+
+ Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 4 10:02:33 2007 +0200
+
+ Fix initrd length corruption in bootm command.
+
+ When using FDT Images, the length of an inital ramdisk was
+ overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
+
+ Patches by Timur Tabi & Johns Daniel.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu May 3 19:43:52 2007 -0500
+
+ mpc83xx: fix trivial error in MAKEALL
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 3 16:34:41 2007 +0200
+
+ Update board configuration for STX GP3SSA board:
+
+ Enable hush shell, environment in flash rather in EEPROM,
+ more user-friendly default environment, etc.
+ The simple EEPROM environment can be selected easily in the board
+ config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 24 14:37:49 2007 +0200
+
+ Cleanup STX GP3SSA code; fix build and compile problems.
+
+commit 35171dc04e028ecacc23ad916a66295472555dbf
+Author: Dan Malek <dan@embeddedalley.com>
+Date: Fri Jan 5 09:15:34 2007 +0100
+
+ Add support for STX GP3SSA (stxssa) Board
+
+ Signed-off-by Dan Malek, <dan@embeddedalley.com>
+
+commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed May 2 13:31:53 2007 +0200
+
+ macb: Don't restart autonegotiation if we already have link
+
+ Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
+ link is already up.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 04fcb5d38bc90779cd9a710d60702075986f0e29
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed May 2 13:22:38 2007 +0200
+
+ macb: Introduce a few barriers when dealing with DMA descriptors
+
+ There were a few theoretical possibilities that the compiler might
+ optimize away DMA descriptor reads and/or writes and thus cause
+ synchronization problems with the hardware. Insert barriers where
+ we depend on reads/writes actually hitting memory.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit ffa621a0d12a1ccd81c936c567f8917a213787a8
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sat Feb 24 01:08:13 2007 -0600
+
+ Cleaned up some 85xx PCI bugs
+
+ * Cleaned up the CDS PCI Config Tables and added NULL entries to
+ the end
+ * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
+ * Fixed 85xx PCI code to assign powar region sizes based on the
+ config values (rather than hard-coding them)
+ * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 6743105988fc44d5b0d30388c790607835aae7a6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:54:25 2007 -0500
+
+ Add support for the 8568 MDS board
+
+ This included some changes to common files:
+ * Add 8568 processor SVR to various places
+ * Add support for setting the qe bus-frequency value in the dts
+ * Add the 8568MDS target to the Makefile
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
+Author: David Updegraff <dave@cray.com>
+Date: Fri Apr 20 14:34:48 2007 -0500
+
+ Add support for treating unknown PHYs as generic PHYs.
+
+ When bringing up u-boot on new boards, PHY support sometimes gets
+ neglected. Most PHYs don't really need any special support,
+ though. By adding a generic entry that always matches if nothing
+ else does, we can provide support for "unsupported" PHYs for the
+ tsec.
+
+ The generic PHY driver supports most PHYs, including gigabit.
+
+ Signed-off-by: David Updegraff <dave@cray.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit a75af9bfd8fff0499efdbb90601cec5a2afef117
+Author: James Yang <James.Yang@freescale.com>
+Date: Wed Feb 7 15:28:04 2007 -0600
+
+ Conditionalize 8641 Rev1.0 MCM workarounds
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Apr 30 13:59:50 2007 -0500
+
+ Fix memory initialization on MPC8349E-mITX
+
+ Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
+ This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
+ on some ITX boards, notably those with a revision 3.1 CPU.
+
+ Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
+ ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Michael Benedict <MBenedict@twacs.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Apr 30 15:26:21 2007 -0500
+
+ mpc83xx: replace elaborate boottime verbosity with 'clocks' command
+
+ and fix CPU: to align with Board: display text.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c1ab82669d9525998c34e802a12cad662723f22a
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Mar 16 13:02:53 2007 -0500
+
+ Rewrote picos_to_clk() to avoid rounding errors.
+ Clarified that conversion is to DRAM clocks rather than platform clocks.
+ Made function static to spd_sdram.c.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8b39501d28754e72726ce7fb02310e56dbdf116a
+Author: Stefan Roese <sr@denx.de>
+Date: Sun Apr 29 14:13:01 2007 +0200
+
+ ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
+Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+Date: Sun Apr 29 14:01:54 2007 +0200
+
+ [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
+
+ MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
+ message. Use PVR to distinguish between the two variants, and print proper CPU
+ information.
+
+ Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5c5d3242935cf3543af01142627494434834cf98
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Apr 25 12:34:38 2007 -0500
+
+ mpc83xx: minor fixups for 8313rdb introduction
+
+commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 25 16:01:26 2007 +0200
+
+ [PATCH] simplify silent console
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 144876a380f5756f57412caf74c1d6dc201dd796
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Apr 24 23:01:02 2007 +0200
+
+ [PATCH] MTD partition support, JFFS2 support
+
+commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Apr 24 14:03:45 2007 +0200
+
+ ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:37:47 2007 -0500
+
+ Reworked 85xx speed detection code
+
+ Changed the code to read the registers and calculate the clock
+ rates, rather than using a "switch" statement.
+
+ Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 81f481ca708ed6a56bf9c410e3191dbad581c565
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 02:24:28 2007 -0500
+
+ Enable 8544 support
+
+ * Add support to the Makefile
+ * Add 8544 configuration support to the tsec driver
+ * Add 8544 SVR numbers to processor.h
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 17:12:25 2007 -0600
+
+ Support 1G size on 8548
+
+ e500v2 and newer cores support 1G page sizes.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 17:11:16 2007 -0600
+
+ Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
+
+ The other pagesz constants use one letter to specify order of
+ magnitude. Also change the one reference to it in mpc8548cds/init.S
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1f9a318cea14272edd10d63739e2d326c90f430e
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 23 16:28:46 2007 -0600
+
+ Only set ddrioovcr for 8548 rev1.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sat Feb 24 01:16:45 2007 -0600
+
+ Tweak DDR ECC error counter
+
+ Enable single-bit error counter when memory was cleared by ddr controller.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Feb 12 13:34:55 2007 -0600
+
+ 85xx: write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 01:44:44 2007 -0500
+
+ Some 85xx cpu cleanups
+
+ * Cleaned up the TSR[WIS] clearing
+ * Cleaned up DMA initialization
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Apr 23 01:32:22 2007 -0500
+
+ Add cpu support for the 8544
+
+ Recognize new SVR values, and add a few register definitions
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 11 16:51:02 2007 -0500
+
+ Add MPC8544DS basic port board files.
+
+ Add board port under new board/freescale directory
+ structure and reuse existing PIXIS FPGA support there.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Apr 11 16:50:57 2007 -0500
+
+ Add MPC8544DS main configuration file.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Wed Dec 27 22:07:15 2006 +0300
+
+ Fix PCI I/O space mapping on Freescale MPC85x0ADS
+
+ The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
+ 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
+ describing the local address window used for the PCI I/O space accesses -- fix
+ this and carry over the necessary changes into the MPC8560ADS code since the
+ PCI I/O space mapping was also broken for this board (by the earlier commit
+ 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
+ the PCI I/O space must be mapped to all the MPC85xx board config. headers.
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+
+ board/mpc8540ads/init.S | 4 ++--
+ board/mpc8560ads/init.S | 4 ++--
+ include/configs/MPC8540ADS.h | 5 ++---
+ include/configs/MPC8541CDS.h | 2 +-
+ include/configs/MPC8548CDS.h | 2 +-
+ include/configs/MPC8560ADS.h | 8 ++++----
+ 6 files changed, 12 insertions(+), 13 deletions(-)
+
+commit 96629cbabdb727d4a5e62542deefc01d498db6dc
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Tue Dec 5 16:42:30 2006 +0800
+
+ u-boot: Fix e500 v2 core reset bug
+
+ The following patch fixes the e500 v2 core reset bug.
+ For e500 v2 core, a new reset control register is added to reset the
+ processor.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 63247a5acd58032e6cf33f525bc3923b467bac88
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Wed Dec 20 11:01:00 2006 +0800
+
+ u-boot: v2: Remove the fixed TLB and LAW entrynubmer
+
+ Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
+ entry number to control the loop. This can reduce the potential risk
+ for the 85xx processor increasing its TLB adn LAW entry number.
+
+ Signed-off-by: Swarthout Edward <swarthout@freescale.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Mon Dec 18 17:01:04 2006 +0800
+
+ u-boot: Fix the 85xxcds tsec bug
+
+ Fix the 85xxcds tsec bug.
+ When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 7337b237ffc4aaf1b9467024fe472a880d852598
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Fri Dec 15 14:43:31 2006 +0800
+
+ u-boot: Fix CPU2 errata on MPC8548CDS board
+
+ This patch apply workaround of CPU2 errata on MPC8548CDS board.
+
+ Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
+
+commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
+Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
+Date: Mon Dec 18 16:25:15 2006 +0800
+
+ u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
+
+ This patch disables MPC8548CDS 2T_TIMING for DDR by default.
+
+ Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
+
+commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
+Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
+Date: Thu Dec 14 14:14:55 2006 +0800
+
+ u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
+
+ Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
+ board.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 96b8a05432f346f36493535c85320b70ec9c7c1b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:54:15 2007 -0500
+
+ mpc83xx: Add MPC8313ERDB support.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 49ea3b6eafe606285ae4d5c378026153dde53200
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:21 2007 -0500
+
+ mpc83xx: Add generic PCI setup code.
+
+ Board code can now request the generic setup code rather than having to
+ copy-and-paste it for themselves. Boards should be converted to use this
+ once they're tested with it.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:19 2007 -0500
+
+ mpc83xx: Add 831x support to speed.c.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:18 2007 -0500
+
+ mpc83xx: Add 831x support to global_data.h
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:16 2007 -0500
+
+ mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
+
+ Rather than misleadingly define PVR_83xx as the specific type of 83xx
+ being built for, the PVR of each core revision is defined. checkcpu() now
+ prints the core that it detects, rather than aborting if it doesn't find
+ what it thinks it wants.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:34:15 2007 -0500
+
+ mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d87c57b201b4572d16f1b642998faa00c9912b16
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Apr 16 14:31:55 2007 -0500
+
+ mpc83xx: Add register definitions for MPC831x.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7fc4c71a143be8666d70803fb25ae60379c95622
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 23 15:39:59 2007 +0200
+
+ Fix file mode
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 38257988abfe74d459ca2ad748b109ca04e4efe1
+Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+Date: Mon Apr 23 15:30:39 2007 +0200
+
+ [PATCH] Avoid assigning PCI resources from zero address
+
+ If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
+ core complains and IDE drivers fails to work. Also, assigning zero to a BAR
+ was illegal according to PCI 2.1 (the later revisions seem to have excluded the
+ sentence about "0" being considered an invalid address) -- so, use a reasonable
+ starting value of 0x1000 (that's what the most Linux archs are using).
+
+ Alternatively, one might have fixed the calls to pci_set_region() individually
+ (some code even seems to have taken care of this issue) but that would have
+ been a lot more work. :-)
+
+ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit afb903a2eb9436baa9270ccc0c27082d86497d89
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Mon Apr 23 14:00:11 2007 +0200
+
+ [patch] setenv(...) can delete environmentalvariables
+
+ update setenv() function so that entering a NULL value for the
+ variable's value will delete the environmental variable
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 36f104e5caa747d568eff26b369565af57c2ffa6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 23 13:54:24 2007 +0200
+
+ [patch] use unsigned char in smc91111 driver for mac
+
+ the v_mac variable in the smc91111 driver is declared as a signed char ...
+ this causes problems when one of the bytes in the MAC is "signed" like 0xE0
+ because when it gets printed out, you get a display like:
+ 0xFFFFFFE0 and that's no good
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Apr 23 13:10:52 2007 +0200
+
+ USB: (Another) delay for crappy USB keys.
+
+ Some USB keys are slow in giving back an answer when the Root HUB
+ enables power lines.
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 23 12:00:22 2007 +0200
+
+ Remove BOARDLIBS usage completely
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 32556443840f127170e4baa8bdd5b567039f6c36
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 21:07:22 2007 +0200
+
+ [PATCH] SystemACE support for Microblaze
+
+commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 21:02:40 2007 +0200
+
+ 16bit read/write little endian
+
+commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sat Apr 21 20:53:31 2007 +0200
+
+ Change ML401 parameters - Xilinx BSP
+
+commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Feb 28 05:37:29 2007 -0600
+
+ mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
+Author: Zhang Wei <wei.zhang@freescale.com>
+Date: Fri Jan 19 10:42:37 2007 +0800
+
+ Enable LAWs for MPC8641 PCI-Ex2.
+
+ Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bd7851ce1e1f140665b520026abf1042968b1102
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Apr 20 14:12:26 2007 -0500
+
+ mpc86xx; Write MAC address to mac-address and local-mac-address
+
+ Some device trees have a mac-address property, some have local-mac-address,
+ and some have both. To support all of these device trees, ftp_cpu_setup()
+ should write the MAC address to mac-address and local-mac-address, if they
+ exist.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7dbdf28b8bd855a8530dc3292e4982575a197060
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Fri Apr 20 14:11:38 2007 -0500
+
+ mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 14da5f7675bbb427c469e3f45006e027b6e21db9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 20 17:43:28 2007 +0200
+
+ Cleanup compiler warnings, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6923565db12af34fd5e02d354ee65a8c78ac460f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 20 12:01:47 2007 +0200
+
+ Fix breakage of NC650 board with respect to nand support.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 39f23cd90947639ac278a18ff277ec786b5ac167
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Fri Apr 20 11:13:16 2007 +0200
+
+ [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
+
+ G2 core reference manual says decrementer and time base
+ are decreasing/increasing once every 4 bus clock cycles.
+ Lets fix it, so time in Linux won't run twice as fast
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu Apr 19 23:14:39 2007 -0400
+
+ Fix serious pointer bug with bootm and reserve map.
+
+ What was suppose to be a stack variable was declared as a pointer,
+ overwriting random memory.
+ Also moved the libfdt.a requirement into the main Makefile. That is
+ The U-Boot Way.
+
+commit d21686263574e95cb3e9e9b0496f968b1b897fdb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Apr 19 09:53:52 2007 +0200
+
+ ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
+
+ Previous versions used full wait states for the chip select #1 which
+ is connected to the Xilinix SystemACE controller on the AMCC Katmai
+ evaluation board. This leads to really slow access and therefore low
+ performance. This patch now sets up the chip select a lot faster
+ resulting in much better read/write performance of the Linux driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 37837828d89084879bee2f2b8c7c68d4695940df
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:49:29 2007 +0200
+
+ Clenaup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:20:58 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 17:07:26 2007 +0200
+
+ Cleanup, update CHANGELOG
+
+ Sigend-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5f6c732affea9647762d27a4617a2ae64c52dceb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 16:17:46 2007 +0200
+
+ Update CHANGELOG
+
+commit ad4eb555671d97f96dc56eab55103b1f86874b01
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 18 14:30:39 2007 +0200
+
+ MCC200 board: remove warning which is obsolete after PSoC firmware changes
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3747a3f010b2b1442dec3e871c69788b6017aaae
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Wed Apr 18 12:11:05 2007 +0200
+
+ [PATCH] icecube/lite5200b: document wakeup from low-power support
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+
+commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 18 12:07:47 2007 +0200
+
+ ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 18 12:05:59 2007 +0200
+
+ ppc4xx: Add output for bootrom location to 405EZ ports
+
+ Now 405EZ ports also show upon bootup from which boot device
+ they are configured to boot:
+
+ U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
+
+ CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
+ Bootstrap Option E - Boot ROM Location EBC (32 bits)
+ 16 kB I-Cache 16 kB D-Cache
+ Board: Acadia - AMCC PPC405EZ Evaluation Board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Tue Apr 17 13:30:33 2007 +0100
+
+ Move ppearse to ARM board list
+ Add Konstantin Kletschke for scb9328.
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
+Author: Domen Puncer <domen.puncer@telargo.com>
+Date: Mon Apr 16 14:00:13 2007 +0200
+
+ [PATCH] icecube/lite5200b: wakeup from low-power support
+
+ U-Boot part of Lite5200b low power mode support.
+ Puts SDRAM out of self-refresh and transfers control to
+ address saved at physical 0x0.
+
+ Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sun Apr 15 13:54:26 2007 -0400
+
+ Fix the ft_cpu_setup() property settings.
+
+ Use "setter" functions instead of flags, cleaner and more flexible.
+ It also fixes the problem noted by Timur Tabi that the ethernet MAC
+ addresses were all being set incorrectly to the same MAC address.
+
+commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Apr 14 22:51:24 2007 -0400
+
+ Improve the bootm command for CONFIG_OF_LIBFDT
+
+ In bootm, create the "/chosen" node only if it doesn't already exist
+ (better matches the previous behavior).
+ Update for proper reserved memory map handling for initrd.
+
+commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Apr 14 22:46:41 2007 -0400
+
+ Add some utilities to manipulate the reserved memory map.
+
+commit 8048cdd56f04a756eeea4951f402bf5cc33785db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 14 21:16:54 2007 +0200
+
+ Update CHANGELOG
+
+commit 8e6875183cdca91c134408d119d4abcd48ef6856
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:56:46 2006 +0100
+
+ AVR32: Enable MMC support
+
+ Set up the portmux for the MMC interface and enable the MMC driver
+ along with support for DOS partitions, ext2 and FAT filesystems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit fc26c97bb6df41b4a95662c34054fe912387bf38
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jan 20 10:03:53 2006 +0100
+
+ Atmel MCI driver
+
+ Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
+
+ The AT91 ARM-based CPUs use basically the same hardware, so it should
+ be possible to share this driver, but no effort has been made so far.
+
+ Hardware documentation can be found in the AT32AP7000 data sheet,
+ which can be downloaded from
+
+ http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:55:37 2006 +0100
+
+ AVR32: Add clk and gpio infrastructure for mmci
+
+ Implement functions for configuring the mmci pins, as well as
+ functions for getting the clock rate of the mmci controller.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7fac3f69e9f05c5e5326681976c35d129324c4de
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 18:53:56 2006 +0100
+
+ Enable partition support with MMC
+
+ Include implementations of init_part() and get_partition_info() when
+ CONFIG_MMC is set.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 17:14:30 2006 +0100
+
+ AVR32: Enable networking
+
+ Implement MACB initialization for AVR32 and ATSTK1000, and turn
+ everything on, including the MACB driver.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jan 20 10:03:34 2006 +0100
+
+ Atmel MACB ethernet driver
+
+ Driver for the Atmel MACB on-chip ethernet controller.
+
+ This driver has been tested on the ATSTK1000 board with a AT32AP7000
+ CPU. It should probably work on AT91SAM926x as well with some minor
+ modifications.
+
+ Hardware documentation can be found in the AT32AP7000 data sheet,
+ which can be downloaded from
+
+ http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 16:56:14 2006 +0100
+
+ AVR32: Add clk and gpio infrastructure for macb0 and macb1
+
+ Implement functions for configuring the macb0 and macb1 pins, as
+ well as functions for getting the clock rate of the various
+ busses the macb ethernet controllers are connected to.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit d5acb95b16a0a74c643524342c3437e765426d05
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 15:39:15 2006 +0100
+
+ AVR32: Implement simple DMA memory allocator
+
+ Implement dma_alloc_coherent() which returns cache-aligned
+ uncacheable memory.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 91975b0fea773c9e681fea8cf3349669f27685ee
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 15:46:02 2006 +0100
+
+ Import <linux/mii.h> from the Linux kernel
+
+ Instead of creating yet another set of MII register definitions
+ in the macb driver, here's a complete set of definitions for everyone
+ to use.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 1b804b229556a4d862da93c0ec94e79419364b2c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Mar 21 19:47:36 2007 +0100
+
+ AVR32: Include more commands for ATSTK1000
+
+ Include the imi, imls and jffs commands sets by default on ATSTK1000.
+ Also define CONFIG_BOOTARGS to something more useful, define
+ CONFIG_BOOTCOMMAND and enable autoboot by default.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Mar 21 19:44:48 2007 +0100
+
+ AVR32: Provide a definition of struct stat
+
+ Copy the definition of struct stat from the Linux kernel.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 12f099c08167a7a51aeee623bc16dafd0841271c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Dec 17 14:46:06 2006 +0100
+
+ AVR32: Use initdram() instead of board_init_memories()
+
+ Conform to the "standard" interface and use initdram() instead of
+ board_init_memories() on AVR32. This enables us to get rid of the
+ sdram_size member of the global_data struct as well.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Nov 20 15:53:10 2006 +0100
+
+ AVR32: Relocate u-boot to SDRAM
+
+ Relocate the u-boot image into SDRAM like everyone else does. This
+ means that we can handle much larger .data and .bss than we used to.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df548d3c3e2bbc40258713167859ffc2ce99a900
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sun Nov 19 18:06:53 2006 +0100
+
+ AVR32: Resource management rewrite
+
+ Rewrite the resource management code (i.e. I/O memory, clock gating,
+ gpio) so it doesn't depend on any global state. This is necessary
+ because this code is heavily used before relocation to RAM, so we
+ can't write to any global variables.
+
+ As an added bonus, this makes u-boot's memory footprint a bit smaller,
+ although some functionality has been left out; all clocks are enabled
+ all the time, and there's no checking for gpio line conflicts.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 18:01:13 2006 +0100
+
+ AVR32: Clean up memory-map.h for at32ap7000
+
+ Convert spaces to tabs (must have missed this one last time around),
+ sort the entries by address and group them together by bus
+ connectivity.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 28c699ef69f4b6cdf252e4747b7b590028a88981
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:32:31 2006 +0100
+
+ AVR32: Build position-independent u-boot
+
+ Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
+ position independent. This will make relocation a lot easier.
+
+ -mno-init-got means that gcc shouldn't emit code to load the GOT
+ address into r6 in every function prologue. We do it once and for
+ all in the early startup assembly code, so enabling this option
+ makes u-boot a bit faster and smaller.
+
+ The assembly parts have always been position-independent, so no code
+ changes should be necessary.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:24:31 2006 +0100
+
+ AVR32: Use avr32-linux- cross-compilation prefix by default
+
+ It doesn't really matter which toolchain you use to compile u-boot,
+ but the avr32-linux one is probably what most people have installed.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Nov 18 17:15:30 2006 +0100
+
+ AVR32: Split start_u_boot into board_init_f and board_init_r
+
+ Split the avr32 initialization code into a function to run before
+ relocation, board_init_f and a function to run after relocation,
+ board_init_r. For now, board_init_f simply calls board_init_r
+ at the end.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
+Author: Heiko Schocher <hs@pollux.denx.de>
+Date: Sat Apr 14 05:26:48 2007 +0200
+
+ [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
+ clear the Display after reset.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
+Author: Denis Peter <d.peter@mpl.ch>
+Date: Fri Apr 13 09:13:33 2007 +0200
+
+ [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
+
+ Fix bug introduced by "Fix get_partition_info() parameter error in all
+ other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
+ to use diskboot or scsiboot form another device than 0.
+
+ Signed-off-by: Denis Peter <d.peter@mpl.ch>
+
+commit 0b94504d22e70f537c17a0d38c87edb6e370977d
+Author: Greg Lopp <lopp@pobox.com>
+Date: Fri Apr 13 08:02:24 2007 +0200
+
+ [PATCH] Fix use of "void *" for block dev read/write buffer pointers
+
+ Signed-of-by: Greg Lopp <lopp@pobox.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
+Author: Xie Xiaobo <r63061@freescale.com>
+Date: Fri Mar 9 19:08:25 2007 +0800
+
+ Fix two bugs for MPC83xx DDR2 controller SPD Init
+
+ There are a few bugs in the cpu/mpc83xx/spd_sdram.c
+ the first bug is that the picos_to_clk routine introduces a huge
+ rounding error in 83xx.
+ the second bug is that the mode register write recovery field is
+ tWR-1, not tWR >> 1.
+
+commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
+Author: Jeffrey Mann <mannj@embeddedplanet.com>
+Date: Thu Apr 12 14:15:59 2007 +0200
+
+ ppc4xx: Fix i2c divisor calcularion for PPC4xx
+
+ This patch fixes changes the i2c_init(...) function to use the function
+ get_OPB_freq() rather than calculating the OPB speed by
+ sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
+ specific per processor. The prior method was not and so was calculating
+ the wrong speed for some PPC4xx processors.
+
+ Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 11 17:25:01 2007 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 51056dd9863e6a1bc363afbbe1775c58cd967418
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Apr 11 17:22:55 2007 +0200
* Use Newline as "password" string
* Use just a single partition in NAND flash
+commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
+Author: Haiying Wang <haiying.wang@freescale.com>
+Date: Mon Jan 22 12:37:30 2007 -0600
+
+ Add PIXIS FPGA support for MPC8641HPCN board.
+
+ Move the 8641HPCN's PIXIS code to the new directory
+ board/freescale/common/ as it will be shared by
+ future boards not in the same processor family.
+
+ Write a "pixis_reset" command that utilizes the FPGA
+ reset sequencer to support alternate soft-reset options
+ such as using the "alternate" flash bank, enabling
+ the watch dog, or choosing different CPU frequencies.
+
+ Add documentation for the pixis_reset to README.mpc8641hpcn.
+
+ Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 6 14:19:43 2007 -0400
+
+ Moved fdt command support code to fdt_support.c
+
+ ...in preparation for improving the bootm command's handling of fdt blobs.
+ Also cleaned up some coding sloppiness.
+
+commit 6679f9299534e488a171a9bb8f9bb891de247aab
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Apr 6 14:17:14 2007 -0400
+
+ libfdt: Make fdt_check_header() public
+
+ Changed _fdt_check_header() to fdt_check_header() and made it part of
+ the interface - it is a useful routine.
+
+ Also did some asthetics cleanup to the include files (headers).
+
+commit c0707ce65677650b5ceab0500ee50ae5168afef2
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:34:06 2007 +0800
+
+ [Blackfin][PATCH] Kill off a bunch of common local prototypes
+
+commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:33:04 2007 +0800
+
+ [Blackfin][PATCH] Fix dynamic CPLB generation issue
+
+commit 0445e3a264251d75b1be45ef713c70726a2952f0
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:31:47 2007 +0800
+
+ [Blackfin][PATCH] minior cleanup
+
+commit 155fd766573981090e638b493d5857562151862e
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:31:18 2007 +0800
+
+ [Blackfin][PATCH] Fix copyright and update license
+
+commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:30:25 2007 +0800
+
+ [Blackfin][PATCH] Add BF537 EMAC driver initialization
+
+commit 889256e8604e0c68db1d866d720894dffede9df6
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:29:55 2007 +0800
+
+ [Blackfin][PATCH] call real the system synchronize instruction
+
+commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:29:17 2007 +0800
+
+ [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
+
+commit dfeeab2cd680df047e68e723b246adf6f33bb556
+Author: Aubrey Li <aubrey.adi@gmail.com>
+Date: Thu Apr 5 18:28:34 2007 +0800
+
+ [Blackfin][PATCH]: fix flash unaligned copy issue
+
+commit 443feb740584e406efa203af909fe2926608e8d5
+Author: Igor Marnat <marny@rambler.ru>
+Date: Wed Mar 21 09:55:01 2007 +0300
+
+ Update usage of 'nc' in README.NetConsole
+
+ Added information about usage of NetConsole on systems where the -l and -p
+ switches are mutually exclusive.
+
+ Signed-off-by: Igor Marnat <marny@rambler.ru>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
commit 31c98a88228021b314c89ebb8104fb6473da4471
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Apr 4 02:09:30 2007 +0200
Minor cleanup.
+commit 822af351ad2babc7d99033361a5fcacd30f6bc78
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Tue Apr 3 14:27:18 2007 +0200
+
+ Support for the Philips ISP116x HCD (Host Controller Driver)
+
+ Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
+
+commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue Apr 3 14:27:08 2007 +0200
+
+ USB: cleanup monahans usb support. Remove dead code.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit a65c5768e5537530bd1780af3d3fddc3113a163c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 2 10:09:30 2007 +0200
+
+ ppc4xx: Change SysACE address on Katmai
+
+ With this new base address of the Xilinx SystemACE controller
+ the Linux driver will be easier to adapt, since it can now be
+ mapped via the "normal" ioremap() call.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
Author: Gerald Van Baren <vanbaren@cideas.com>
Date: Sat Mar 31 14:30:53 2007 -0400
PATCH: Resolve GPL license problem
+commit ae00bb4b2944dc64a485ed72a19754b11af7c223
+Author: Rodolfo Giometti <giometti@enneenne.com>
+Date: Mon Mar 26 12:03:36 2007 +0200
+
+ PXA: pxa27x USB OHCI support
+
+ Signed-off-by: Rodolfo Giometti <giometti@linux.it>
+
+commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Mar 26 11:21:05 2007 +0200
+
+ USB: remove the S3C24X0_merge #define, which was introduced while
+ merging OHCI drivers.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
commit 1798049522f594013aea29457d46794298c6ae15
Author: Michal Simek <root@monstr.eu>
Date: Mon Mar 26 01:39:07 2007 +0200
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 83853178bd36bca6f0f8f1331476620c84a587fc
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Mar 7 12:14:50 2007 -0600
+
+ net - Support ping reply when processing net-loop
+
+ Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
+
+ This permits the ping command to test the phy interface when the phy
+ is put in loopback mode (typically by setting register 0 bit 14).
+
+ It also allows the port to respond to an external ping when u-boot is
+ processing some other net command (such as tftp). This is useful when
+ tftp appears to hang.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Ben Warren <bwarren@qstreams.com>
+
commit fa1aef15bcd47736687be1af544506e90fba545d
Author: Stefan Roese <sr@denx.de>
Date: Wed Mar 7 16:43:00 2007 +0100
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Mar 4 01:36:05 2007 +0100
+
+ Some code cleanup.
+
commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
Author: Kim Phillips <kim.phillips@freescale.com>
Date: Wed Feb 28 00:02:04 2007 -0600
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
Identification Register (CIR).
+commit fdef388758506765d4d6a7155c8f1584c63ff581
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Jan 22 13:19:21 2007 +0800
+
+ use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
+ The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
+ fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
+ mpc7448hpc2 board.
+
commit a4012396645533aef218354eeba754dff0deace8
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Fri Jan 19 23:08:39 2007 +0100
automatic update mechanism
+commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 17:56:59 2006 +0800
+
+ Slight code clean up.
+ Add comments, delete duplicate define and remove spaces.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 17:54:21 2006 +0800
+
+ Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
+ multiplier table can not refect the real PLL clock behavior of these
+ processors. Please refer to the hardware specification for detailed
+ information of the corresponding processors.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 14:46:23 2006 +0800
+
+ Remove the static MAC address, ip address, server ip, netmask and
+ gateway ip for network setting.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Mon Dec 4 14:33:08 2006 +0800
+
+ Remove the duplicate memory test code for mpc744ihpc2 board.
+ If a memory test is needed, please use the functions in
+ post/memory.c or memtest command.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Dec 1 19:01:25 2006 +0800
+
+ Fix the exception occuring in RAM table search issue.
+ The original search_one_table() function code can only processes the search
+ for the exception occurring in FLASH/ROM, because the exception and fixup
+ table usually locate in FLASH. If the exception address is also in
+ FLASH, it will be OK.
+ If the exception occurs in RAM, after the u-boot relocation, a
+ relocation offset should be added.
+
+ clean up the code in cpu/74xx_7xx/cpu.c
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit ee311214e0d216f904feea269599d0934bf71f23
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Dec 1 11:47:36 2006 +0800
+
+ Clean up the code according to codestyle:
+ (1) remove some C++ comments.
+ (2) remove trailing white space.
+ (3) remove trailing empty line.
+ (4) Indentation by table.
+ (5) remove {} in one line condition.
+ (6) add space before '(' in function call.
+ Remove some weird printf () output.
+ Add necessary comments.
+ Modified Makefile to support building in a separate directory.
+
commit dd520bf314c7add4183c5191692180f576f96b60
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu Nov 30 18:02:20 2006 +0100
Signed-off-by: Stefan Roese <sr@denx.de>
+commit 58b485776698c3d71ec5a215e392123b4c15afa3
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:51:21 2006 +0100
+
+ Add a small README with information on the generic ohci driver.
+
+commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:46:46 2006 +0100
+
+ Fix some endianness issues related to the generic ohci driver
+
+commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:44:58 2006 +0100
+
+ Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
+ to choose between the old and the generic OHCI drivers.
+
+commit 53e336e9ffc51035bdc4e5867631b3378761b4df
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon Nov 27 11:43:09 2006 +0100
+
+ Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
+ and adapted board configs TQM5200 and yosemite accordingly. This commit
+ also makes the maximum number of root hub ports configurable
+ (CFG_USB_OHCI_MAX_ROOT_PORTS).
+
commit 78d620ebb5871d252270dedfad60c6568993b780
Author: Wolfgang Denk <wd@atlas.denx.de>
Date: Thu Nov 23 22:58:58 2006 +0100
Signed-off-by: Nick Spence <nick.spence@freescale.com>
+commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Nov 3 13:10:00 2006 +0800
+
+ Remove some unused CFG define.
+ undef CFG_DRAM_TEST
+
+commit 99c09c4dec34f77c243bf51bea532e3f339410ad
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Fri Nov 3 13:07:36 2006 +0800
+
+ Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
+ Both work. 0xFF000000 seems more reasonable.
+
commit c59200443072353044aa4bf737a5a60f9a9af231
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu Nov 2 15:15:01 2006 +0100
Release U-Boot 1.1.6
+commit c1fbe4103a0d6c8957f912af902d705ba67836f2
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:14:48 2006 +0800
+
+ This patch comes from Yuli's posted patch on 8/8/2006
+ titled "CFI Driver Little-Endian write Issue".
+
+ http://sourceforge.net/mailarchive/message.php?msg_id=36311999
+
+ If that patch applied, please discard this one.
+ Until now , I do not see his patch is applied. So please apply this one.
+
+ Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit b825f158e449e1e9cf74c08e572955e122394c96
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:12:31 2006 +0800
+
+ Tsi108 on chip i2c support.
+
+ The i2c Interface provides a master-only, serial interface that can be
+ used for initializing Tsi108/Tsi109 registers from an EEPROM after a
+ device reset.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:11:06 2006 +0800
+
+ Tsi108 on chip pci controller support.
+
+ If there is no pci card, the tsi108/109 pci configure read will
+ cause a machine check exception to the processor. PCI error should
+ also be cleared after the read.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit d1927cee977126e547ceeba23e4f978f377cfb8f
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:08:55 2006 +0800
+
+ Tundra tsi108 on chip Ethernet controller support.
+
+ The following is a brief description of the Ethernet controller:
+ The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
+ Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
+ to manage the two physical connection devices (PHYs). Each Ethernet port
+ has its own statistics monitor that tracks and reports key interface
+ statistics. Each port supports a 256-entry hash table for address
+ filtering. In addition, each port is bridged to the Switch Fabric
+ through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
+
+ Each Ethernet port also has a pair of internal Ethernet DMA channels to
+ support the transmit and receive data flows. The Ethernet DMA channels
+ use descriptors set up in memory, the memory map of the device, and
+ access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
+ handles arbitration for the Switch Fabric. The Controller also
+ has a register businterface for register accesses and status monitor
+ control.
+
+ The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
+ modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
+ The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
+ data flows to and from the Ethernet Controller through the Switch Fabric.
+
+ Each Ethernet port uses its transmit and receive DMA channels to manage
+ data flows through buffer descriptors that are predefined by the
+ system (the descriptors can exist anywhere in the system memory map).
+ These descriptors are data structures that point to buffers filled
+ with data ready to transmit over Ethernet, or they point to empty
+ buffers ready to receive data from Ethernet.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 19:01:33 2006 +0800
+
+ Tundra tsi108 header file.
+
+ The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
+ PowerPC processors that offers numerous system interconnect options for
+ embedded application designers. The Tsi108 can interconnect 60x or
+ MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
+ and Flash. Provided the macro define for tsi108 chip.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 87c4db09699c6b89176b31004afcb83eb1585d47
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:59:15 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 27801b8ab11c61b577e45742a515bb3b23b80241
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:57:21 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ Make ,config.mk and link file for the mpc7448hpc2 board.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:55:04 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ The mpc7448hpc2 board support header file.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 625bb5ddb50b243f931262ca8c46956409471917
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:52:21 2006 +0800
+
+ Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
+ The mpc7448hpc2 board support low level assemble language init code.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 4c52783b3d024e153c4972b97332e314bc3bdc46
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:49:51 2006 +0800
+
+ General code modification for mpc7448hpc2 board support.
+ 1. Add 7447A and 7448 processor support.
+ 2. Add the following flags.
+
+ CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
+ (such as by switch on board), this flag should be set.
+
+ CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
+ relocates to RAM, this flag should be set.
+
+ CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
+ system hang in exception, this flag should be set.
+
+ There is a design issue for tsi108/109 pci configure read. When pci scan
+ the slots, if there is no pci card, the tsi108/9 will cause a machine
+ check exception for mpc7448 processor.
+
+ Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
+Author: roy zang <tie-fei.zang@freescale.com>
+Date: Thu Nov 2 18:34:47 2006 +0800
+
+ Add README file for mpc7448hpc2 board.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
Author: Bartlomiej Sieka <tur@semihalf.com>
Date: Wed Nov 1 02:04:38 2006 +0100
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+commit 99d70e3a47affb9bae041a2caece7cd516e213b3
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Jun 26 11:06:00 2006 +0200
+
+ More code cleanup
+
commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
Author: Jon Loeliger <jdl@freescale.com>
Date: Thu Jun 22 08:51:46 2006 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit 386eda022473394ad8f36b86f2bdc9b4cb816291
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jun 14 18:14:56 2006 +0200
+
+ Code cleanup
+
+commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Wed Jun 14 17:45:53 2006 +0200
+
+ Various USB related patches
+ - Add support for mpc8xx USB device.
+ - Add support for Common Device Class - Abstract Control Model USB console.
+ - Add support for flow control in USB slave devices.
+ - Add support for switching between gserial and cdc_acm using environment.
+ - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
+ - Update usbcore slightly to ease host enumeration.
+ - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
+ - Add AdderUSB_config as a defconfig to enable usage of the USB console
+ by default with the Adder87x U-Boot port.
+ Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
+
commit 8ecc971618f56029ad99d3516f8b297a6ed58971
Author: Jon Loeliger <jdl@jdl.com>
Date: Wed Jun 7 10:53:55 2006 -0500
Signed-off-by: Jon Loeliger <jdl@freescale.com>
+commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 30 16:56:14 2006 +0200
+
+ Support generic OHCI support for the s3c24x0 cpu.
+
commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
Author: Haiying Wang <Haiying.Wang@freescale.com>
Date: Tue May 30 09:10:32 2006 -0500
Signed-off-by: Jon Loeliger <jdl@jdl.com>
+commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 23 13:38:35 2006 +0200
+
+ Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
+ fixes to the latter.
+
+commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Tue May 23 10:33:11 2006 +0200
+
+ More cleanup for the delta board and the generic usb_ohci driver. Added
+ CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
+ initialization and cleanup hooks respectively.
+
+commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Mon May 22 16:33:54 2006 +0200
+
+ This patch adds USB storage support for the delta board. This is the first
+ board to make use of a generic OHCI driver, that calls hooks for board
+ dependant initialization.
+
commit 14e37081ff3cac7ebe6e93836523429853b6b292
Author: Jon Loeliger <jdl@jdl.com>
Date: Fri May 19 13:28:39 2006 -0500