Changes for U-Boot 1.1.3:
======================================================================
+* Adjust configuration of XENIAX board
+ (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+ routed to the Watchdog handler
+ Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+ Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+ Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+ loopback test code
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+ - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+ (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+ for details.
+ - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+ to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+ - Add support for AMCC PPC440EP/GR.
+ - Add support for AMCC Yosemite PPC440EP eval board.
+ - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+ - fix alignment of NAND size
+ - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+ The code is provided for, and was tested on, the Yukon/Alaska
+ and PM520 boards only.
+
+ A bug in flash_real_protect() for the Yukon board was fixed by
+ adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+ This fixes a problem of displaying bogus voltages when the voltages
+ are so low that the I2C devices start failing while the rest of the
+ system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+ Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+ Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+ "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+ U-Boot will automaticially find the end of the corresponding sector.
+
+* Patch by Stefan Roese, 5 Jul 2005:
+ Update uc100 board PHY setup
+
+* Patch by Stefan Roese, 1 Jul 2005:
+ Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+ Fix PHY addresses for PPChameleon and CATcenter boards
+ Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+ Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+ Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+ HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+ Initialize allocated dev and private hw structures
+ after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+ Fix byteorder problems with second argument of "bootm" with
+ standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+ Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+ (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+ those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+ - add support for the KS8695P (ARM 922 based) CPU
+ - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+ Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+ Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+ make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+ genereated HRESET pulse is too short to reset the external
+ circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+ (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+ size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+ March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+ added to support LZO and LZARI compression modes (undefined by
+ default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+ sections on PPChameleon board; other boards might use this, too.
+
* Patch by Stefan Roese, 03 May 2005:
Update for P3G4
Fix problems in cmd_universe.c