======================================================================
+Changes for U-Boot 1.1.4:
+======================================================================
+
+* Enable PCI on hmi1001 board
+
+* Fix return values of the jffs2 commands ls/fsload/fsinfo,
+ so we can use them to, e.g., check the existence of a file with
+ "if ls foo; then this; else that; fi" in the hush shell
+ Patch by Andreas Engel, 16 August 2005
+
+* Coding style cleanup
+
+* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
+ Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+
+* Check return value of malloc in 440gx_enet.c
+ Patch by Travis B. Sawyer, 18 Jul 2005
+
+* Add Sandburst Metrobox and Sandburst Karef board support packages.
+ Second serial port on 440GX now defined as a system device.
+ Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
+ Patch by Travis B. Sawyer, 12 Jul 2005
+
+======================================================================
Changes for U-Boot 1.1.3:
======================================================================
+* Minor code cleanup
+
+* Add forgotten new fils from latest VoiceBlue update
+
+* Make bootretry feature work with hush shell.
+ Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
+ Patch by Andreas Engel, 19 Jul 2005
+
+* Update Hymod Board Database PHP code in "tools" directory
+ Patch by Murray Jensen, 01 Jul 2005
+
+* Make "tr" command use POSIX compliant; export HOSTOS make variable
+ Patch by Murray Jensen, 30 Jun 2005
+
+* Fix Murray Jensen's mail address.
+ Patch by Murray Jensen, 30 Jun 2005
+
+* Preserve PHY_BMCR during a soft reset.
+ Patch by Carl Riechers, 24 Jun 2005
+
+* VoiceBlue update: eeprom tool can also store firmware version now.
+ eeprom.bin is runable by jumping at load address.
+ Patch by Ladislav Michl, 23 May 2005
+
+* Move the AT91RM9200DK to the ARM Systems list.
+ Patch by Anders Larsen, 26 Apr 2005
+
+* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
+ Patch by Anders Larsen, 26 Apr 2005
+
+* measure_gclk() is needed when DEBUG is enabled
+ Patch by Bryan O'Donoghue, 25 Apr 2005
+
+* Add UPD-Checksum code, fix problem in net.c (return instead of break)
+ Patch by Reinhard Arlt, 12 Aug 2005
+
+* esd PCI405 board updated
+ Patch by Matthias Fuchs, 28 Jul 2005
+
+* esd WUH405 and DU405 board updated
+ Patch by Matthias Fuchs, 27 Jul 2005
+
+* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
+ Patch by Matthias Fuchs, 4 May 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+ boards (baudrate, environment...). Flash driver fixed.
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+ Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+ Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+ CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+ with the 405 defines and the linux kernel defines.
+ Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
+* Add common (with Linux) MTD partition scheme and "mtdparts" command
+
+ Old, obsolete and duplicated code was cleaned up and replace by the
+ new partitioning method. There are two possible approaches now:
+
+ The first one is to define a single, static partition:
+
+ #undef CONFIG_JFFS2_CMDLINE
+ #define CONFIG_JFFS2_DEV "nor0"
+ #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
+ #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
+ #define CONFIG_JFFS2_PART_OFFSET 0x00000000
+
+ The second method uses the mtdparts command line option and dynamic
+ partitioning:
+
+ /* mtdparts command line support */
+ #define CONFIG_JFFS2_CMDLINE
+ #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
+ #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+
+ Command line of course produces bigger images, and may be inappropriate
+ for some targets, so by default it's off.
+
+* Fix build problems for PM856 Board
+
+* Fix sign extension bug in 'fpga loadb' command;
+ make 'fpga loadb' always print the file header info
+ Patch by Andrew Dyer, 11 Jan 2005
+
+* Fix errors that occur when accessing SystemACE CF
+ Patch by Jeff Angielski, 09 Jan 2005
+
+* Document switching between U-Boot and PlanetCore on RPXlite
+ by Sam Song, 24 Dec 2004
+
+* Fix PowerQUICC II mask detection.
+ Patch by Eugene Surovegin, 20 Dec 2004
+
+* Add support for Altera NIOS DK1C20 board
+ Patch by Shlomo Kut, 13 Dec 2004
+
+* Add support for ep8248 board
+ Patch by Yuli Barcohen, 12 Dec 2004
+
+ Minor code cleanup.
+
+* Fix baudrate setting for KGDB on MPC8260
+ Patch by HoJin, 11 Dec 2004
+
+* Fix 'mii help' text formatting
+ Patch by Cory Tusar, 10 Dec 2004
+
+* Fix return code of NFS command
+ Patch by Hiroshi Ito, 11 Dec 2004
+
+* Fix typo
+
+* Fix compiler warnings in cpu/ppc4xx/usbdev.c
+ Patch by Steven Blakeslee, 04 Aug 2005
+
+* Add support for AMCC Bamboo PPC440EP eval board
+ Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+ Fix style issues primarily in 85xx and 83xx boards.
+ - C++ comments
+ - Trailing white space
+ - Indentation not by TAB
+ - Excessive amount of empty lines
+ - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+ Add Xianghua Xiao and Lunsheng Wang's support for the
+ GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+ Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+ Move the TSEC driver out of cpu/mpc85xx as it will be shared
+ by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+ Implemented support for MPC8548CDS board.
+ Added DDR II support based on SPD values for MPC85xx boards.
+ This roll-up patch also includes bugfies for the previously
+ published patches:
+ DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+ Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+ For MPC85xxCDS:
+ Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+ for faster flash parts.
+ Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+ Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+ - Convert the CPM2 based functionality to use new CONFIG_CPM2
+ option rather than a myriad of CONFIG_MPC8560-like variants.
+ Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+ Eliminates the CONFIG_MPC8560 option entirely. Distributes the
+ new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+ Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+ Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+ (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+ routed to the Watchdog handler
+ Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+ Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+ Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+ loopback test code
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+ - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+ (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+ for details.
+ - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+ to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+ - Add support for AMCC PPC440EP/GR.
+ - Add support for AMCC Yosemite PPC440EP eval board.
+ - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+ - fix alignment of NAND size
+ - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+ The code is provided for, and was tested on, the Yukon/Alaska
+ and PM520 boards only.
+
+ A bug in flash_real_protect() for the Yukon board was fixed by
+ adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+ This fixes a problem of displaying bogus voltages when the voltages
+ are so low that the I2C devices start failing while the rest of the
+ system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+ Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+ Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+ "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+ U-Boot will automaticially find the end of the corresponding sector.
+
+* Patch by Stefan Roese, 5 Jul 2005:
+ Update uc100 board PHY setup
+
+* Patch by Stefan Roese, 1 Jul 2005:
+ Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+ Fix PHY addresses for PPChameleon and CATcenter boards
+ Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+ Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+ Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+ HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+ Initialize allocated dev and private hw structures
+ after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+ Fix byteorder problems with second argument of "bootm" with
+ standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+ Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+ (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+ those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+ - add support for the KS8695P (ARM 922 based) CPU
+ - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+ Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+ Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+ make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+ genereated HRESET pulse is too short to reset the external
+ circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+ (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+ size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+ March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+ added to support LZO and LZARI compression modes (undefined by
+ default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+ sections on PPChameleon board; other boards might use this, too.
+
+* Patch by Stefan Roese, 03 May 2005:
+ Update for P3G4
+ Fix problems in cmd_universe.c
+
+* Patch by Matthias Fuchs, 03 May 2005:
+ Added missing variable declaration in cmd_nand.c
+ Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+
+* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+
+* Fix bug in the SDRAM initialization code for canmb, IceCube and
+ PM520 boards.
+ Fix PHY address for canmb board.
+
+* Cleanup serial console baudrate calculation on AT91RM9200;
+ get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+
+* Patch by Matthias Fuchs, 18 Apr 2005:
+ Make PCI target address spaces on PMC405 and CPCI405 boards
+ configurable via environment variables
+
+* Auto-size RAM on canmb board.
+
+* Add support for canmb board
+
+* Patch by Stefan Roese, 13 Apr 2005:
+ Update for esd apc405
+
+* Fixes for TQM8560 board:
+ - fix clock rates
+ - remove debug messages
+ - fix flash sector protection
+
+* Patch by Steven Scholz, 07 Apr 2005:
+ Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+
+* Patches by Steven Scholz, 07 Apr 2005:
+ Fix compiler warning in altera.c
+ Fix warning in cpu/arm920t/at91rm9200/i2c.c
+
+* Patch by Ladislav Michl, 06 Apr 2005:
+ Fix voiceblue configuration.
+
+* Patch by Stefan Roese, 06 Apr 2005:
+ Updates for OCOTEA board:
+ - Changed U-Boot size from 512kByte to 256kByte
+ - Fixed flash driver to support boot from soldered user flash
+ - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+ - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+ Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+ - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+ - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+ - update the pxa-regs.h file for PXA27x chips
+ - add PXA27x based ADSVIX board
+ - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+ Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+ Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+ subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+ (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+ Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+ Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+ - introduce two new configuration options instead:
+ CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+ reset timers so it's save to use udelay() in timeout code.
+
+* Patch by Mathias Küster, 23 Nov 2004:
+ add udelay support for the mcf5282 cpu
+
+* Patch by Tolunay Orkun, 16 November 2004:
+ fix incorrect onboard Xilinx CPLD base address
+
+* Patch by Jerry Van Baren, 08 Nov 2004:
+ - Add low-boot option for MPC8260ADS board (if lowboot is selected,
+ the jumper for the HRCW source should select flash. If lowboot is
+ not selected, the jumper for the HRCW source should select the
+ BCSR.
+ - change default load base address to 0x00400000
+
+* Patch by Yuli Barcohen, 08 Nov 2004:
+ Add support for Analogue & Micro Rattler boards.
+ Tested on Rattler8248.
+
+* Patch by Andre Renaud, 08 Nov 2004:
+ Fix watchdog support in common/lcd.c
+
+* Patch by Marc Leeman, 05 Nov 2003:
+ Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
+ bug only affects the XPC8245 processors
+
+* Patches by Josef Wagner, 29 Oct 2004:
+ - Add support for MicroSys CPU87 board
+ - Add support for MicroSys PM854 board
+
+* Patch by Jian Zhang, 02 Nov 2004:
+ Add 16-bit NAND support
+
+* Patch by Scott McNutt, 01 Nov 2004:
+ Add missing NIOS/NIOS2 support for "iminfo" command
+
+* Patch by Detlev Zundel, 29 Oct 2004:
+ Add missing NIOS/NIOS2 support for "mkimage" tool.
+
+* Patch by David Adair, 27 Oct 2004:
+ Add missing 440GX SDRAM Controller reset
+
+* Patch by Steven Scholz, 25 Oct 2004:
+ Declare reset_cpu() in include/common.h instead locally
+
+* Patch by Yusdi Santoso, 22 Oct 2004:
+ - Add support for HIDDEN_DRAGON board
+ - fix endianess problem in driver/rtl1839.c
+
+* Patch by Allen Curtis, 21 Oct 2004:
+ support multiple serial ports
+
+* Patch by Richard Klingler, 03 Apr 2005:
+ Add call to eth_halt() in net/net.c when called functions fail
+ after eth_init() has been called.
+
+* Patch by Sam Song, 3 April 2005:
+ - Update README.Netconsole
+ - Update README
+
+* Prepare for SoC rework of ARM code:
+ - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
+ - rename memsetup into lowlevel_init (function name and source files)
+ Patch by Steven Scholz, 03 Apr 2005:
+ - create SoC specific directories include/asm-arm/arch-imx and
+ include/asm-arm/arch-s3c24x0
+
+* Fix problems with SNTP support;
+ enable SNTP support in some boards.
+
+* Patches by Martin Krause, 01 Apr 2005:
+ - Fix flash erase timeout on CMC_PU2
+ - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+
+* Patch by Steven Scholz, 13 March 2005:
+ fix cache enabling for AT91RM9200
+
+* Patch by Masami Komiya, 30 Mar 2005:
+ add SNTP support and expand time server and time offset fields of
+ DHCP support. See doc/README.SNTP
+
+* Patch by Steven Scholz, 13 Dec 2004:
+ Fix bug in at91rm920 ethernet driver
+
+* Patch by Steven Scholz, 13 Dec 2004:
+ Remove duplicated code by merging memsetup.S files for
+ at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+
+* Patch by Detlev Zundel, 31 Mar 2005:
+ Cleanup duplicate definition of overwrite_console()
+
+* Update TQM5200 configuration;
+ prepare for Rev. 200 starter kit boards
+
+* Patch by Scott McNutt, 21 Oct 2004:
+ Add support for Nios-II EPCS Controller core.
+
+* Patch by Scott McNutt, 20 Oct 2004:
+ Nios-II cleanups:
+ - Add sysid command (Nios-II only).
+ - Locate default exception trampoline at proper offset.
+ - Implement I/O routines (readb, writeb, etc)
+ - Implement do_bootm_linux
+
+* Patches by Martin Krause, 22 Mar 2005:
+ - use TQM5200_auto as MAKEALL target for TQM5200 systems
+ - add support for SM501 graphics controller
+ - add support for graphic console on TQM5200
+ - add support for TQM5200 Rev 200
+ - cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Manfred Baral, 17 Mar 2005:
+ Fix typo
+
+* Fix RTC configuration for PPChameleon board
+
+* Cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Stefan Roese, 16 Mar 2005:
+ Update for esd auto_update and hh405 board
+
+* Adapt for U-Boot image size (new features enabled) on TQM5200
+
+* Update code for TQM8540 board (and 85xx in general):
+ - Change the name of the Ethernet driver: MOTO ENET -> ENET
+ - Reformat boot messages
+ - Enable redundant environment
+ - Replace the -O2 optimization flag with -mno-string
+
+* Patch by David Brownell, 10 Mar 2005:
+ Restore copyright statements in OHCI drivers.
+
+* Add support for TQM8540 board
+
+* Patch by Detlev Zundel, 14 Mar 2005:
+ NC650: changed NAND flash addressing to using UPMB
+
+* Patch by Stefan Roese, 14 Mar 2005:
+ Update for esd voh405 fpga image
+
+* INKA4x0: Allow initialization of LCD backlight dimming from
+ "brightness" environment variable.
+
+* Add port initialization for digital I/O on INKA4x0
+
+* Patch by Stefan Roese, 01 Mar 2005:
+ Update for esd boards dp405 and hub405
+
+* Fix get_partition_info() parameter error in all other calls
+ (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+
+* Enable USB and IDE support for INKA4x0 board
+
+* Patch by Andrew Dyer, 28 Feb 2005:
+ fix ext2load passing an incorrect pointer to get_partition_info()
+ resulting in load failure for devices other than 0
+
+* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+
+* Cleanup USB and partition defines
+
+* Add support for ext2 filesystems and image timestamps to TQM5200 board
+
+* Add reset code for Coral-P on INKA4x0 board
+
+* Patch by Martin Krause, 28 Jun 2004:
+ Update for TRAB board.
+
+* Fix some missing "volatile"s in MPC5xxx FEC driver
+
+* Fix cirrus voltage detection (for CPC45)
+
+* Fix byteorder problem in usbboot and scsiboot commands.
+
* Patch by Cajus Hahn, 04 Feb 2005:
- don't insist on leading '/' for filename in ext2load
- set default partition to useful value (1) in ext2load