======================================================================
+Changes since U-Boot 1.0.1:
+======================================================================
+
+* Patch by Yuli Barcohen, 26 Jan 2004:
+ Allow bzip2 compression for small memory footprint boards
+
+* Patch by Brad Kemp, 21 Jan 2004:
+ Add support for CFI flash driver for both the Intel and the AMD
+ command sets.
+
+* Patch by Travis Sawyer, 20 Jan 2004:
+ Fix pci bridge auto enumeration of sibling p2p bridges.
+
+* Patch by Tolunay Orkun, 12 Jan 2004:
+ Add some delays as needed for Intel LXT971A PHY support
+
+* Patches by Stephan Linz, 09 Jan 2004:
+ - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
+ - make DK1C20 board configuration related to ASMI conform to
+ documentation
+
+* Patch by Anders Larsen, 09 Jan 2004:
+
+ ARM memory layout fixes: the abort-stack is now set up in the
+ correct RAM area, and the BSS is zeroed out as it should be.
+
+ Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
+ of the linker scripts are replaced by '__bss_start' and '_end',
+ resp., which is a further step to eliminate unnecessary differences
+ between the implementation of the CPU architectures.
+
+* Patch by liang a lei, 9 Jan 2004:
+ Fix Intel 28F128J3 ID in include/flash.h
+
+* Patch by Masami Komiya, 09 Jan 2004:
+ add support for TB0229 board (NEC VR4131 MIPS processor)
+
+* Patch by Leon Kukovec, 12 Dec 2003:
+ changed extern __inline__ into static __inline__ in
+ include/linux/byteorder/swab.h
+
+* Patch by Travis Sawyer, 30 Dec 2003:
+ Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
+ select MDI port based on enabled EMAC device.
+ Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
+ base PrPMC board.
+
+* Patch by Wolter Kamphuis, 15 Dec 2003:
+ made CONFIG_SILENT_CONSOLE usable on all architectures
+
+* Disable date command on TQM866M - there is no RTC on MPC866
+
+* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
+
+* Implement adaptive SDRAM timing configuration based on actual CPU
+ clock frequency for INCA-IP; fix problem with board hanging when
+ switching from 150MHz to 100MHz
+
+* Add PCMCIA CS support for BMS2003 board
+
+* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
+ see doc/README.MPC866 for details;
+ implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
+ calculate CPU clock frequency from PLL register values.
+
+* Add support for 128 MB RAM on TQM8xxL/M modules
+
+* Fix PS/2 keyboard problem caused by statically initialized variable
+ pointing to a location in flash
+
+* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
+
+* The PS/2 mux on the BMS2003 board needs 450 ms after power on
+ before we can access it; add delay in case we are faster (with no
+ CF card inserted)
+
+* Cleanup of some init functions
+
+* Make sure SCC Ethernet is always stopped by the time we boot Linux
+ to avoid Linux crashes by early packets coming in.
+
+* Accelerate flash accesses on LWMON board by using buffered writes
+
+* Fix typo in Makefile;
+ fix problem with PARTNUM detection
+
+* Patch by Reinhard Meyer, 09 Jan 2004:
+ - add RTC support for MPC5200 based boards (requires RTC_XTAL)
+
+* Add support for IDE LED on BMS2003 board
+ (exclusive with status LED!)
+
+* Add support for PS/2 keyboard (used with PS/2 multiplexor on
+ BMS2003 board)
+
+* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
+ Add common files for "emk" boards
+
+* Add a common get_ram_size() function and modify the the
+ board-specific files to invoke that common implementation.
+
+======================================================================
+Changes for U-Boot 1.0.1:
+======================================================================
+
+* Set default clock for INCA-IP to 150 MHz
+
+* Make BMS2003 use a separate config file to avoid #ifdef mess;
+ add I2C support; add support for DS1337 RTC
+
+* Add CompactFlash support for BMS2003 board
+
+* Add support for status LED on BMS2003 board
+
+* Patch by Scott McNutt, 02 Jan 2004:
+ Add support for the Nios Active Serial Memory Interface (ASMI)
+ on Cyclone devices
+
+* Patch by Andrea Marson, 16 Dec 2003:
+ Add support for the PPChameleon ME and HI modules
+
+* Patch by Yuli Barcohen, 22 Dec 2003:
+ Add support for Motorola DUET ADS board (MPC87x/88x)
+
+* Patch by Robert Schwebel, 15 Dec 2003:
+ add support for cramfs (uses JFFS2 command interface)
+
+* Patches by Stephan Linz, 11 Dec 2003:
+ - more documentation for NIOS port
+ - new struct nios_pio_t, struct nios_spi_t
+ - Reconfiguration for NIOS Development Kit DK1C20:
+ o move board related code from board/dk1c20
+ to board/altera/dk1c20
+ o create a new common source path board/altera/common
+ and move generic flash access stuff into it
+ o change/expand configuration file DK1C20.h
+ - Add support for NIOS Development Kit DK1S10
+ - Add status LED support for NIOS systems
+ - Add dual 7-segment LED support for Altera NIOS DevKits
+
+* Patch by Ronen Shitrit, 10 Dec 2003:
+ Add support for the Marvell DB64360 / DB64460 development boards
+
+* Patch by Detlev Zundel, 10 Dec 2003:
+ fix dependency problem in examples/Makefile
+
+* Patch by Denis Peter, 8 Dec 2003
+ - add support for the PATI board (MPC555)
+ - add SPI support for the MPC5xx
+
+* Patch by Anders Larsen, 08 Dec 2003:
+ add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
+ to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
+ cleanup some redundand #defines
+
+* Patch by André Schwarz, 8 Dec 2003:
+ fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
+ - TX and RX deskriptors must be quad-word aligned
+ - does not work with only one TX deskriptor
+ - standard reset method does not work
+
+* Patch by Masami Komiya, 08 Dec 2003:
+ add RTL8139 ethernet driver
+
+* Patches by Ed Okerson, 07 Dec 2003:
+ - fix ethernet for the AU1x00 processors in little-endian mode.
+ - extend memsetup.S for the AU1x00 processors in BE and LE modes
+
+* Minor code cleanup (coding style)
+
+* Patch by Reinhard Meyer, 30 Dec 2003:
+ - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
+ - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
+ - turned debug print of PHY registers into a function (called in two places)
+ - added support for EMK MPC5200 based modules
+
+* Fix MPC8xx PLPRCR_MFD_SHIFT typo
+
+* Add support for TQM866M modules
+
+* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
+
+* Fix a few compiler warnings
+
+* Patch by Reinhard Meyer, 28 Dec 2003:
+ Add initial support for TOP5200 board
+
+* Make CPU clock on ICA-IP board controllable by a "cpuclk"
+ environment variable which can set to "100", "133", or "150". The
+ CPU clock will be configured accordingly upon next reboot. Other
+ values are ignored. In case of an invalid or undefined "cpuclk"
+ value, the compile-time default CPU clock speed will be used.
+
+* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
+ window that is used to access the UART registers by the Linux driver)
+
+* Patch by Reinhard Meyer, 20 Dec 2003:
+ Fix clock calculation for the MPC5200 for higher clock frequencies
+ (above 2**32 / 10 = 429.5 MHz).
+
+* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
+
+* Fix IceCube CLKIN configuration (it's 33.000000MHz)
+
+* Add new configuration for IceCube board with DDR memory
+
+* Update TRAB memory configurations
+
+* Add JFFS2 support for INCA-IP board
+
+* Patch by Bill Hargen, 09 Dec 2003:
+ - BUBINGA405EP: changed flash driver to protect top sector containing
+ first instruction.
+ - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
+ - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
+ - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
+ - 405EP: added/fixed support for "reginfo" command.
+ - 4xx: removed spurious MII error messages on "mii info" command.
+
+* Patch by Bernhard Kuhn, 28 Nov 2003:
+ add support for Coldfire CPU
+ add support for Motorola M5272C3 and M5282EVB boards
+
+* Patch by Pierre Aubert, 24 Nov 2003:
+ - add a return value for the fpga command
+ - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
+ is defined. If ide_preinit fails, ide_init is aborted.
+ - fix an endianess problem in fat.h
+
+* Patch by Wolter Kamphuis, 05 Dec 2003:
+ Add support for SNMC's QS850/QS823/QS860T boards
+
+* Patch by Yuli Barcohen, 3 Dec 2003:
+ "revive" U-Boot support for old Motorola MPC860ADS board
+
+* Patch by Cam(ilo?), 03 Dec 2003:
+ make examples build even with broken Montavista objcopy
+
+* Patch by Pavel Bartusek, 27 Nov 2003:
+ fix conversion problem with "bootretry" evironment variable
+
+* Patch by Andre Schwarz, 24 Nov 2003:
+ add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
+
+* Patch by Pavel Bartusek, 21 Nov 2003:
+ set ZMII bridge speed on 440
+
+* Patch by Anders Larsen, 17 Nov 2003:
+ Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
+
+* Patches by David Müller, 14 Nov 2003:
+ - board/mpl/common/common_util.c
+ * implement support for BZIP2 compressed images
+ * various cleanups (printf -> puts, ...)
+ - board/mpl/common/flash.c
+ * report correct errors to upper layers
+ * check the erase fail and VPP low bits in status reg
+ - board/mpl/vcma9/cmd_vcma9.c
+ - board/mpl/vcma9/flash.c
+ * various cleanups (printf -> puts, ...)
+ - common/cmd_usb.c
+ * fix typo in comment
+ - cpu/arm920t/usb_ohci.c
+ * support for S3C2410 is missing in #if line
+ - drivers/cs8900.c
+ * reinit some registers in case of error (cable missing, ...)
+ - fs/fat/fat.c
+ * support for USB/MMC devices is missing in #if line
+ - include/configs/MIP405.h
+ - include/configs/PIP405.h
+ * enable BZIP2 support
+ * enlarge malloc space to 1MiB because of BZIP2 support
+ - include/configs/VCMA9.h
+ * enable BZIP2 support
+ * enlarge malloc space to 1MiB because of BZIP2 support
+ * enable USB support
+ - lib_arm/armlinux.c
+ * change calling convention of ARM Linux kernel as
+ described on http://www.arm.linux.org.uk/developer/booting.php
+
+* Patch by Thomas Lange, 14 Nov 2003:
+ Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
+ support all these AMD boards.
+
+* Patch by Thomas Lange, 14 Nov 2003:
+ Workaround for mips au1x00 physical memory accesses (the au1x00
+ uses a 36 bit bus internally and cannot access physical memory
+ directly. Use the uncached SDRAM address instead of the physical
+ one.)
+
+* Patch by Xue Ligong (Joe), 13 Nov 2003:
+ add Realtek 8019 ethernet driver
+
+* Patch by Yuli Barcohen, 13 Nov 2003:
+ MPC826xADS/PQ2FADS cleanup
+
+* Patch by Anders Larsen, 12 Nov 2003:
+ Update README to mark the PORTIO commands non-standard
+
+* Patch by Nicolas Lacressonnière, 12 Nov 2003:
+ update for for Atmel AT91RM9200DK development kit:
+ - support for environment variables in DataFlash
+ - Atmel DataFlash AT45DB1282 support
+
+* Patch by Jeff Carr, 11 Nov 2003:
+ add support for new version of 8270 processors
+
+* Patches by George G. Davis, 05 Nov 2003:
+ - only pass the ARM linux initrd tag to the kernel when an initrd
+ is actually present
+ - update omap1510inn configuration file
+
+* Patches by Stephan Linz, 3 Nov 2003:
+ - more endianess fixes for LAN91C111 driver
+ - CFG_HZ configuration patch for NIOS Cyclone board
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
+
+* Patch by Steven Scholz, 20 Oct 2003:
+ - make "mii info <addr>" show infor for PHY at "addr" only
+ - Endian fix for miiphy_info()
+
+* Patch by Gleb Natapov, 19 Sep 2003:
+ Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
+
+* Patch by Anders Larsen, 17 Sep 2003:
+ Bring ARM memory layout in sync with the documentation:
+ stack and malloc-heap are now located _below_ the U-Boot code
+
+* Accelerate booting on TRAB board: read and check autoupdate image
+ headers first instead of always reading the whole images.
+
+* Fix type in MPC5XXX code (pointed out by Victor Wren)
+
+* Enabled password check on RMU board
+
+* Fix configuration problem with IceCube in LOWBOOT configuration:
+ envrionment got embedded, corrupting the image layout.
+
+* Fix NEC display names (it's 6440 [for 640x480], not 6640).
+
+* Added BMS2003 board
+ add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
+
+* Fix flash driver for TRAB board (must use Unlock Bypass Reset
+ command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
+ and CPLD
+
+* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
+ recent tools
+
+* Add checksum verification to 'imls' command
+
+* Add bd_info fields needed for 4xx Linux I2C driver
+
+* Patch by Martin Krause, 4 Nov. 2003:
+ Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
+
+* Print used network interface when CONFIG_NET_MULTI is set
+
+* Patch by Bernhard Kuhn, 28 Oct 2003:
+ Add low boot support for MPC5200
+
+* Fix problem with dual PCMCIA support (NSCU)
+
+* Fix MPC5200 I2C initialization function
+
+======================================================================
Changes for U-Boot 1.0.0:
======================================================================
+* Fix parameter passing to standalone images with bootm command
+
+* Patch by Kyle Harris, 30 Oct 2003:
+ Fix build errors for ixdp425 board
+
+* Patch by David M. Horn, 29 Oct 2003:
+ Fixes to build under CYGWIN
+
+* Get IceCube MGT5100 working (again)
+
+* Fix problems in memory test on some boards (which was not
+ non-destructive as intended)
+
+* Patch by Gary Jennejohn, 28 Oct 2003:
+ Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
+ to prevent stack overflow on ARM systems
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix init sequence error for NIOS port
+
+* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
+
+* Add CONFIG_VERSION_VARIABLE to TRAB configuration
+
+* Patch by Xiao Xianghua, 23 Oct 2003:
+ small patch for mpc85xx
+
+* Fix small problem in MPC5200 I2C driver
+
+* Fix FCC3 support on ATC board
+
+* Correct header printing for multi-image files in do_bootm()
+
+* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
+
+* Fix PCI problems on PPChameleon board
+
+* Patch by Steven Scholz, 18 Oct 2003:
+ Fix AT91RM9200 ethernet driver
+
+* Patch by Nye Liu, 17 Oct 2003:
+ Fix typo in include/mpc8xx.h
+
+* Patch by Richard Woodruff, 16 Oct 03:
+ Fixes for cpu/arm925/interrupt.c
+ - Initialize timestamp & lastdec vars.
+ - fix timestamp overflows.
+ - fix lastdec overflow.
+ - smarter normalization to allow udelay() below 1ms to work.
+
+* Patch by Scott McNutt, 16 Oct
+ add networking support for the Altera Nios Development Kit,
+ Cyclone Edition (DK-1C20)
+
+* Patch by Jon Diekema, 14 Oct 2003:
+ add hint about doc/README.silent to README file
+
+* Add CompactFlash support for NSCU
+
+* Fix PCI problems on PPChameleonEVB
+
+* TRAB auto-update: Base decision if we have to strip the image
+ header on image type as encoded in the header
+ (include image type patch by Martin Krause, 17 Oct 2003)
+
+* Patches by Xianghua Xiao, 15 Oct 2003:
+
+ - Added Motorola CPU 8540/8560 support (cpu/85xx)
+ - Added Motorola MPC8540ADS board support (board/mpc8540ads)
+ - Added Motorola MPC8560ADS board support (board/mpc8560ads)
+
+* Fix flash timings on TRAB board
+
+* Make sure HUSH is initialized for running auto-update scripts
+
+* Make 5200 reset command _really_ reset the board, without running
+ any other code after it
+
+* Fix errors with flash erase when range spans across banks
+ that are mapped in reverse order
+
+* Fix flash mapping and display on P3G4 board
+
+* Patch by Kyle Harris, 15 Jul 2003:
+ - add support for Intel IXP425 CPU
+ - add support for IXDP425 eval board
+
+* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
+ for more information
+
+* Patch by Steven Scholz, 10 Oct 2003
+ - Add support for Altera FPGA ACEX1K
+
+* Patches by Thomas Lange, 09 Oct 2003:
+ - fix cmd_ide.c for non ppc boards (read/write functions did not
+ add ATA base address)
+ - fix for shannon board
+ - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
+ - Endian swap ATA identity for all big endian CPUs, not just PPC
+ - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
+ args to linux
+ - add support for dbau1x00 board (MIPS32)
+
+* Patch by Sangmoon Kim, 07 Oct 2003:
+ add support for debris board
+
+* Patch by Martin Krause, 09 Oct 2003:
+ Fixes for TRAB board
+ - /board/trab/rs485.c: correct baudrate
+ - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
+ udelay(); fix some timing problems with adc controller
+ - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
+ modify commands: touch and buzzer
+
+* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
+ (quick & dirty workaround for rogue pointer problem in get_vfatname());
+ Use direct function calls for auto_update instead of hush commands
+
+* Patch by Scott McNutt, 04 Oct 2003:
+ - add support for Altera Nios-32 CPU
+ - add support for Nios Cyclone Development Kit (DK-1C20)
+
+* Patch by Steven Scholz, 29 Sep 2003:
+ - A second parameter for bootm overwrites the load address for
+ "Standalone Application" images.
+ - bootm sets environment variable "filesize" to the resulting
+ (uncompressed) data length for "Standalone Application" images
+ when autostart is set to "no". Now you can do something like
+ if bootm $fpgadata $some_free_ram ; then
+ fpga load 0 $some_free_ram $filesize
+ fi
+
+* Patch by Denis Peter, 25 Sept 2003:
+ add support for the MIP405 Rev. C board
+
+* Patch by Yuli Barcohen, 25 Sep 2003:
+ add support for Zephyr Engineering ZPC.1900 board
+
+* Patch by Anders Larsen, 23 Sep 2003:
+ add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
+ implemented for the x86 architecture)
+
+* Patch by Sangmoon Kim, 23 Sep 2003:
+ fix pll_pci_to_mem_multiplier table for MPC8245
+
+* Patch by Anders Larsen, 22 Sep 2003:
+ enable timed autoboot on PXA
+
+* Patch by David Müller, 22 Sep 2003:
+ - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
+ returns correct libgcc file path
+ - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
+ time on s3c24x0 systems
+
+* Patch by Jon Diekema, 19 Sep 2003:
+ - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
+ link state to the fault LED.
+ - In NetLoop, make the Fault LED reflect the link status. The link
+ status gets updated on entry, and on timeouts.
+
+* Patch by Anders Larsen, 18 Sep 2003:
+ allow mkimage to build and run on Cygwin-hosted systems
+
+* Patch by Frank Müller, 18 Sep 2003:
+ use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
+ cpu/mpc8xx/fec.c
+
+* Patch by Pantelis Antoniou, 16 Sep 2003:
+ add tool to compute fileds in the PLPRCR register for MPC86x
+
+* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
+
+* Fix build problems under FreeBSD
+
+* Add generic filesystem image type
+
+* Make fatload set filesize environment variable
+
+* enable basic / medium / high-end configurations for PPChameleonEVB
+ board; fix NAND code
+
+* enable TFTP client code to specify to the server the desired
+ timeout value (see RFC-2349)
+
* Improve SDRAM setup for TRAB board
* Suppress all output with splashscreen configured only if "splashimage"
Changes for U-Boot 0.4.8:
======================================================================
-<<<<<<< CHANGELOG
-<<<<<<< CHANGELOG
-<<<<<<< CHANGELOG
* Add I2C and RTC support for RMU board
-=======
-=======
-=======
* Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB
* Avoid flicker on TRAB's VFD
->>>>>>> 1.130
* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Add GCC library to examples/Makefile so GCC utility functions will
be resolved, too
->>>>>>> 1.118
* Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command
Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
CONFIG_BOOTP_MAKS (see README).
->>>>>>> 1.112
* Fix ICU862 environment problem
* Fix RAM size detection for RMU board