* Patch by Philippe Robin, 09 Mar 2004:
[kernel/u-boot.git] / CHANGELOG
index b6eaa89..11ca9ed 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,200 @@
 Changes for U-Boot 1.0.2:
 ======================================================================
 
+* Patch by Philippe Robin, 09 Mar 2004:
+  Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
+  Platform support.
+
+* Patch by Masami Komiya, 08 Mar 2004:
+  Don't overwrite server IP address or boot file name
+  when the boot server does not return values
+
+* Patch by listmember@orkun.us, 5 Mar 2004:
+  Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+  Fix early board initialization for Cogent CSB272 board
+
+* Patch by Ed Okerson, 3 Mar 2004:
+  fix CFI flash writes for little endian systems
+
+* Patch by Reinhard Meyer, 01 Mar 2004:
+  generalize USB and IDE support for MPC5200 with according
+  changes to IceCube.h and TOP5200.h
+  add Am29LV256 256 MBit FLASH support for TOP5200 boards
+  add info about USB and IDE to README
+
+* Patch by Yuli Barcohen, 4 Mar 2004:
+  Fix problems with GCC 3.3.x which changed handling of global
+  variables explicitly initialized to zero (now in .bss instead of
+  .data as before).
+
+* Patch by Leon Kukovec, 02 Mar 2004:
+  add strswab() to fix IDE LBA capacity, firmware and model numbers
+  on little endian machines
+
+* Patch by Masami Komiya, 02 Mar 2004:
+  - Remove get_ticks() from NFS code
+  - Add verification of RPC transaction ID
+
+* Patch by Pierre Aubert, 02 Mar 2004:
+  cleanup for IDE and USB drivers for MPC5200
+
+* Patch by Travis Sawyer, 01 Mar 2004:
+  Ocotea:
+  - Add IBM PPC440GX Ref Platform support (Ocotea)
+    Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
+    Adapted to U-Boot and 440GX port
+  440gx_enet.c:
+  - Add gracious handling of all Ethernet Pin Selections for 440GX
+  - Add RGMII selection for Cicada CIS8201 Gigabit PHY
+  ppc440.h:
+  - Add needed bit definitions
+  - Fix formatting
+
+* Patch by Carl Riechers, 1 Mar 2004:
+  Add PPC440GX prbdv0 divider to fix memory clock calculation.
+
+* Patch by Stephan Linz, 27 Feb 2004
+  - avoid problems for targets without NFS download support
+
+* Patch by Rune Torgersen, 27 Feb 2004:
+  - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
+  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
+  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
+
+* Patch by Masami Komiya, 27 Feb 2004:
+  Fix rarpboot: add autoload by NFS
+
+* Patch by Dan Eisenhut, 26 Feb 2004:
+  fix flash_write return value in saveenv
+
+* Patch by Stephan Linz, 11 Dec 2003
+  expand config.mk to avoid trigraph warnings on NIOS
+
+* Rename "BMS2003" board into "HMI10"
+
+* SX1 patches: use "serial#" for USB serial #; use redundand environment
+  storage; auto-set console on USB port (using preboot command)
+
+* Add support for SX1 mobile phone; add support for USB-based console
+  (enable with "setenv stdout usbtty; setenv stdin usbtty")
+
+* Fix LOWBOOT configuration for MPC5200 with DDR memory
+
+* Fix SDRAM timings for LITE5200 / IceCube board
+
+* Handle Auti-MDIX / connection status for INCA-IP
+
+* Fix USB problems when attempting to read 0 bytes
+
+* Patch by Travis Sawyer, 26 Feb 2004:
+  Fix broken compile for XPEDITE1K target.
+
+* Patch by Stephan Linz, 26 Feb 2004:
+  Bug fix for NFS code on NIOS targets
+
+* Patch by Stephen Williams, 26 Feb 2004:
+  Break up SystemACE reads of large block counts
+
+* Patch by Pierre Aubert, 26 Feb 2004
+  add IDE support for MPC5200
+
+* Patch by Masami Komiya, 26 Feb 2004:
+  add autoload via NFS
+
+* Patch by Stephen Williams
+  Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
+  elsewhere in the source.
+
+* Patch by Steven Scholz, 25 Feb 2004:
+  - Timeouts in FPGA code should be based on CFG_HZ
+  - Minor cleanup in code for Altera FPGA ACEX1K
+
+* Patch by Steven Scholz, 25 Feb 2004:
+  Changed "Directory Hierarchy" section in README
+
+* Patch by Masami Komiya, 25 Feb 2004:
+  Reduce copy count in nfs_read_reply() of NFS code
+
+* Patch by Markus Pietrek, 24 Feb 2004:
+  NS9750 DevBoard added
+
+* Patch by Pierre Aubert, 24 Feb 2004
+  add USB support for MPC5200
+
+* Patch by Steven Scholz, 24 Feb 2004:
+  - fix MII commands to use values from last command
+
+* Patch by Torsten Demke, 24 Feb 2004:
+  Add support for the eXalion platform (SPSW-8240, F-30, F-300)
+
+* Patch by Rahul Shanbhag, 19 Feb 2004:
+  Fixes for for OMAP1610 board:
+  - shift some IRQ specific code to platform.S file
+  - remove duplicatewatchdog reset code from start.S
+
+* Make Auto-MDIX Support configurable on INCA-IP board
+
+* Fix license for mkimage tool
+
+* Patch by Masami Komiya, 24 Feb 2004:
+  Update NetBootFileXferSize in NFS code
+
+* Patch by Scott McNutt, 24 Feb 2004:
+  fix packet length in NFS code
+
+* Patch by Masami Komiy, 22 Feb 2004:
+  Add support for NFS for file download
+
+* Patch by Andrea Scian, 17 Feb 2004:
+  Add support for S3C44B0 processor and DAVE B2 board
+
+* Patch by Steven Scholz, 20 Feb 2004:
+  - Add support for MII commands on AT91RM9200 boards
+  - some cleanup in AT91RM9200 ethernet code
+
+* Patch by Peter Ryser, 20 Feb 2004:
+  Add support for the Xilinx ML300 platform
+
+* Patch by Stephan Linz, 17 Feb 2004:
+  Fix watchdog support for NIOS
+
+* Patch by Josh Fryman, 16 Feb 2004:
+  Fix byte-swapping for cfi_flash.c for different bus widths
+
+* Patch by Jon Diekema, 14 Jeb 2004:
+  Remove duplicate "FPGA Support" notes from the README file
+
+* Patches by Reinhard Meyer, 14 Feb 2004:
+  - update board/emk tree; use common flash driver
+  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
+    [adapted for other PPC CPUs -- wd]
+  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
+
+* Patch by Jon Diekema, 13 Feb 2004:
+  Call show_boot_progress() whenever POST "FAILED" is printed.
+
+* Patch by Nishant Kamat, 13 Feb 2004:
+  Add support for TI OMAP1610 H2 Board
+  Fixes for cpu/arm926ejs/interrupt.c
+       (based on Richard Woodruff's patch for arm925, 16 Oct 03)
+  Fix for a timer bug in OMAP1610 Innovator
+  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
+
+* Patches by Stephan Linz, 12 Feb 2004:
+  - add support for NIOS timer with variable period preload counter value
+  - prepare POST framework support for NIOS targets
+
+* Patch by Denis Peter, 11 Feb 2004:
+  add POST support for the MIP405 board
+
+* Patch by Laurent Mohin, 10 Feb 2004:
+  Fix buffer overflow in common/usb.c
+
+* Patch by Tolunay Orkun, 10 Feb 2004:
+  Add support for Cogent CSB272 board
+
 * Patch by Thomas Elste, 10 Feb 2004:
   Add support for NET+50 CPU and ModNET50 board