-#endif
-#endif
-
-/* Environment is stored in the eMMC boot partition */
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#define CONFIG_SYS_MMC_ENV_PART 1
-#define CONFIG_ENV_SIZE (10 * 1024)
-#define CONFIG_ENV_OFFSET (1024 * 1024) /* 1 MB */
-#define CONFIG_ENV_OFFSET_REDUND (1536 * 1024) /* 512KB from CONFIG_ENV_OFFSET */
-
-#define CONFIG_ENV_VERSION 100
-#define CONFIG_BOARD_NAME opos6ul
-#define ACFG_CONSOLE_DEV ttymxc0
-#define CONFIG_SYS_AUTOLOAD "no"
-#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
-#define CONFIG_BOOTCOMMAND "run emmcboot"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
- "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
- "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
- "fdt_addr=0x88000000\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_name=" __stringify(CONFIG_BOARD_NAME) "dev\0" \
- "initrd_high=0xffffffff\0" \
- "ip_dyn=yes\0" \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0" \
- "mmcdev=0\0" \
- "mmcpart=2\0" \
- "mmcroot=/dev/mmcblk0p2 ro\0" \
- "mmcrootfstype=ext4 rootwait\0" \
- "kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
- "splashpos=0,0\0" \
- "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
- "videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
- "check_env=if test -n ${flash_env_version}; " \
- "then env default env_version; " \
- "else env set flash_env_version ${env_version}; env save; " \
- "fi; " \
- "if itest ${flash_env_version} != ${env_version}; then " \
- "echo \"*** Warning - Environment version" \
- " change suggests: run flash_reset_env; reset\"; " \
- "env default flash_reset_env; " \
- "else exit; fi; \0" \
- "flash_reset_env=env default -f -a && saveenv && " \
- "echo Environment variables erased!\0" \
- "download_uboot_spl=tftpboot ${loadaddr} ${board_name}-u-boot.spl\0" \
- "flash_uboot_spl=" \
- "if mmc dev 0 1; then " \
- "setexpr sz ${filesize} / 0x200; " \
- "setexpr sz ${sz} + 1; " \
- "if mmc write ${loadaddr} 0x2 ${sz}; then " \
- "echo Flashing of U-boot SPL succeed; " \
- "else echo Flashing of U-boot SPL failed; " \
- "fi; " \
- "fi;\0" \
- "download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img\0" \
- "flash_uboot_img=" \
- "if mmc dev 0 1; then " \
- "setexpr sz ${filesize} / 0x200; " \
- "setexpr sz ${sz} + 1; " \
- "if mmc write ${loadaddr} 0x8a ${sz}; then " \
- "echo Flashing of U-boot image succeed; " \
- "else echo Flashing of U-boot image failed; " \
- "fi; " \
- "fi;\0" \
- "update_uboot=run download_uboot_spl flash_uboot_spl " \
- "download_uboot_img flash_uboot_img\0" \
- "download_kernel=tftpboot ${loadaddr} ${kernelimg}\0" \
- "flash_kernel=" \
- "if ext4write mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} ${filesize}; then " \
- "echo kernel update succeed; " \
- "else echo kernel update failed; " \
- "fi;\0" \
- "update_kernel=run download_kernel flash_kernel\0" \
- "download_dtb=tftpboot ${fdt_addr} imx6ul-${fdt_name}.dtb\0" \
- "flash_dtb=" \
- "if ext4write mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb ${filesize}; then " \
- "echo dtb update succeed; " \
- "else echo dtb update in failed; " \
- "fi;\0" \
- "update_dtb=run download_dtb flash_dtb\0" \
- "download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ext4\0" \
- "flash_rootfs=" \
- "if mmc dev 0 0; then " \
- "setexpr nbblocks ${filesize} / 0x200; " \
- "setexpr nbblocks ${nbblocks} + 1; " \
- "if mmc write ${loadaddr} 0x40800 ${nbblocks}; then " \
- "echo Flashing of rootfs image succeed; " \
- "else echo Flashing of rootfs image failed; " \
- "fi; " \
- "fi;\0" \
- "update_rootfs=run download_rootfs flash_rootfs\0" \
- "flash_failsafe=" \
- "if mmc dev 0 0; then " \
- "setexpr nbblocks ${filesize} / 0x200; " \
- "setexpr nbblocks ${nbblocks} + 1; " \
- "if mmc write ${loadaddr} 0x800 ${nbblocks}; then " \
- "echo Flashing of rootfs image in failsafe partition succeed; " \
- "else echo Flashing of rootfs image in failsafe partition failed; " \
- "fi; " \
- "fi;\0" \
- "update_failsafe=run download_rootfs flash_failsafe\0" \
- "download_userdata=tftpboot ${loadaddr} ${board_name}-user_data.ext4\0" \
- "flash_userdata=" \
- "if mmc dev 0 0; then " \
- "setexpr nbblocks ${filesize} / 0x200; " \
- "setexpr nbblocks ${nbblocks} + 1; " \
- "if mmc write ${loadaddr} 0 ${nbblocks}; then " \
- "echo Flashing of user_data image succeed; " \
- "else echo Flashing of user_data image failed; " \
- "fi; " \
- "fi;\0" \
- "update_userdata=run download_userdata flash_userdata; mmc rescan\0" \
- "erase_userdata=" \
- "if mmc dev 0 0; then " \
- "echo Erasing eMMC User Data partition, no way out...; " \
- "mw ${loadaddr} 0 0x200000; " \
- "mmc write ${loadaddr} 0 0x1000; " \
- "mmc write ${loadaddr} 0x800 0x1000; " \
- "mmc write ${loadaddr} 0x40800 0x1000; " \
- "mmc write ${loadaddr} 0x440800 0x1000; " \
- "fi;" \
- "mmc rescan\0" \
- "update_all=run update_rootfs update_uboot\0" \
- "initargs=setenv bootargs console=${consoledev},${baudrate} ${extrabootargs}\0" \
- "addipargs=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
- "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
- "addmmcargs=setenv bootargs ${bootargs} root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "emmcboot=run initargs; run addmmcargs; " \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} && " \
- "load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb && " \
- "bootz ${loadaddr} - ${fdt_addr};\0" \
- "emmcsafeboot=setenv mmcpart 1; setenv mmcroot /dev/mmcblk0p1 ro; run emmcboot;\0" \
- "addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "nfsboot=run initargs; run addnfsargs addipargs; " \
- "nfs ${loadaddr} ${serverip}:${rootpath}/boot/${kernelimg} && " \
- "nfs ${fdt_addr} ${serverip}:${rootpath}/boot/imx6ul-${fdt_name}.dtb && " \
- "bootz ${loadaddr} - ${fdt_addr};\0"