projects
/
platform
/
kernel
/
u-boot.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
[platform/kernel/u-boot.git]
/
include
/
configs
/
km82xx.h
diff --git
a/include/configs/km82xx.h
b/include/configs/km82xx.h
index
b23cb96
..
1f9c720
100644
(file)
--- a/
include/configs/km82xx.h
+++ b/
include/configs/km82xx.h
@@
-2,7
+2,7
@@
* (C) Copyright 2007-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* (C) Copyright 2007-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
*/
#ifndef __CONFIG_H
@@
-29,8
+29,12
@@
#error ("Board unsupported")
#endif
#error ("Board unsupported")
#endif
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#define CONFIG_SYS_TEXT_BASE 0xFE000000
+#define CONFIG_MISC_INIT_R
+
/* include common defines/options for all Keymile boards */
#include "km/keymile-common.h"
#include "km/km-powerpc.h"
/* include common defines/options for all Keymile boards */
#include "km/keymile-common.h"
#include "km/km-powerpc.h"
@@
-204,9
+208,6
@@
""
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
""
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
#define CONFIG_SYS_MONITOR_LEN (768 << 10)
#define CONFIG_SYS_MONITOR_LEN (768 << 10)
@@
-227,6
+228,7
@@
/* enable I2C and select the hardware/software driver */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
/* enable I2C and select the hardware/software driver */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
+#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_SYS_NUM_I2C_BUSES 3
#define CONFIG_SYS_I2C_MAX_HOPS 1
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_NUM_I2C_BUSES 3
#define CONFIG_SYS_I2C_MAX_HOPS 1
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
@@
-237,6
+239,7
@@
{0, {{I2C_MUX_PCA9542, 0x70, 1} } } }
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
{0, {{I2C_MUX_PCA9542, 0x70, 1} } } }
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
+#define CONFIG_KM_I2C_ABORT
/*
* Software (bit-bang) I2C driver configuration
/*
* Software (bit-bang) I2C driver configuration
@@
-271,7
+274,6
@@
int get_scl(void);
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
-#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS 3
#define CONFIG_SYS_DTT_BUS_NUM 2
#define CONFIG_SYS_DTT_HYSTERESIS 3
#define CONFIG_SYS_DTT_BUS_NUM 2
@@
-428,11
+430,6
@@
int get_scl(void);
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
-/* pass open firmware flat tree */
-#define CONFIG_FIT 1
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"