-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
-
-#ifdef CONFIG_SYS_USE_NANDFLASH
-/* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0xc0000
-#define CONFIG_ENV_OFFSET_REDUND 0x100000
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_BOOTCOMMAND \
- "nand read 0x70000000 0x200000 0x300000;" \
- "bootm 0x70000000"
-#define CONFIG_BOOTARGS \
- "console=ttyS0,115200 earlyprintk " \
- "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
- "256k(env),256k(env_redundant),256k(spare)," \
- "512k(dtb),6M(kernel)ro,-(rootfs) " \
- "root=/dev/mtdblock7 rw rootfstype=jffs2"
-#elif CONFIG_SYS_USE_MMC
-/* bootstrap + u-boot + env + linux in mmc */
-#define FAT_ENV_INTERFACE "mmc"
-/*
- * We don't specify the part number, if device 0 has partition table, it means
- * the first partition; it no partition table, then take whole device as a
- * FAT file system.
- */
-#define FAT_ENV_DEVICE_AND_PART "0"
-#define FAT_ENV_FILE "uboot.env"
-#define CONFIG_ENV_IS_IN_FAT
-#define CONFIG_FAT_WRITE
-#define CONFIG_ENV_SIZE 0x4000
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "mtdparts=atmel_nand:" \
- "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
- "root=/dev/mmcblk0p2 rw rootwait"
-#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \
- "fatload mmc 0:1 0x72000000 zImage; " \
- "bootz 0x72000000 - 0x71000000"
-#endif
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-/* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x300000
-#define CONFIG_SPL_MAX_SIZE 0x010000
-#define CONFIG_SPL_STACK 0x310000
-
-#define CONFIG_SYS_MONITOR_LEN 0x80000
-
-#ifdef CONFIG_SYS_USE_MMC
-
-#define CONFIG_SPL_BSS_START_ADDR 0x70000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000
-#define CONFIG_SYS_SPL_MALLOC_START 0x70080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000
-
-#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
-#elif CONFIG_SYS_USE_NANDFLASH
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_SOFTECC
-#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE