-/*
- * Copyright (C) 2010 NXP Semiconductors
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-
-/**
-* \file phNfcConfig.h
-* \brief HAL Configurations
-*
-*
-* \note This is the configuration header file of the HAL 4.0.All configurable parameters of the HAL 4.0
-* are provided in this file
-*
-* Project: NFC-FRI-1.1 / HAL4.0
-*
-* $Date: Thu Sep 9 14:56:35 2010 $
-* $Author: ing04880 $
-* $Revision: 1.39 $
-* $Aliases: $
-*
-*/
-
-
-/*@{*/
-#ifndef PHNFC_CONFIG_H
-#define PHNFC_CONFIG_H
-/*@}*/
-
-
-/**
-* \name Hal
-*
-* File: \ref phNfcConfig.h
-*
-*/
-
-/*@{*/
-#define PH_NFC_CONFIG_FILEREVISION "$Revision: 1.39 $" /**< \ingroup grp_file_attributes */
-#define PH_NFC_CONFIG_FILEALIASES "$Aliases: $" /**< \ingroup grp_file_attributes */
-/*@}*/
-
-
-/* -----------------Include files ---------------------------------------*/
-
-#ifdef NFC_CUSTOM_CONFIG_INCLUDE
-#include<nfc_custom_config.h>
-#endif
-
-/* ---------------- Macros ----------------------------------------------*/
-
-
-
-/*
- *****************************************************************
- ********************** DEFAULT MACROS **************************
- *****************************************************************
- */
-
-
-/**< External Clock Request Configuration for the NFC Device,
- 0x00U No Clock Request,
- 0x01U Clock Request through CLKREQ pin (GPIO pin 2),
- 0x02U Clock Request through NXP_EVT_CLK_REQUEST Event,
- */
-#ifndef NXP_DEFAULT_CLK_REQUEST
-#define NXP_DEFAULT_CLK_REQUEST 0x00U
-#endif
-
-/**< External Input Clock Setting for the NFC Device,
- 0x00U No Input Clock Required (Use the Xtal),
- 0x01U 13 MHZ,
- 0x02U 19.2 MHZ,
- 0x03U 26 MHZ,
- 0x04U 38.4 MHZ,
- 0x05U Custom (Set the Custome Clock Registry),
- */
-
-#ifndef NXP_DEFAULT_INPUT_CLK
-#define NXP_DEFAULT_INPUT_CLK 0x00U
-#endif
-
-/**< UICC Power Request configuration for the NFC Device,
- 0x00U No Power Request,
- 0x01U Power Request through CLKREQ pin (GPIO pin 2),
- 0x02U Power Request through PWR_REQUEST (GPIO Pin 3),
- */
-
-#ifndef NXP_UICC_PWR_REQUEST
-#define NXP_UICC_PWR_REQUEST 0x00U
-#endif
-
-/**< TX LDO Configuration
- 0x00 00b 3.0 V,
- 0x01 01b 3.0 V,
- 0x02 10b 2.7 V,
- 0x03 11b 3.3 V,
- */
-
-#ifndef NXP_DEFAULT_TX_LDO
-#define NXP_DEFAULT_TX_LDO 0x00U
-#endif
-
-/**< UICC Bit Rate Configuration
- 0x02 212Kbits/Sec
- 0x04 424Kbits/Sec
- 0x08 828Kbits/Sec
- */
-
-#ifndef NXP_UICC_BIT_RATE
-#define NXP_UICC_BIT_RATE 0x08U
-#endif
-
-
-/**< Indicates PN544 Power Modes Configuration for the NFC Device,
+/*\r
+ * Copyright (C) 2010 NXP Semiconductors\r
+ *\r
+ * Licensed under the Apache License, Version 2.0 (the "License");\r
+ * you may not use this file except in compliance with the License.\r
+ * You may obtain a copy of the License at\r
+ *\r
+ * http://www.apache.org/licenses/LICENSE-2.0\r
+ *\r
+ * Unless required by applicable law or agreed to in writing, software\r
+ * distributed under the License is distributed on an "AS IS" BASIS,\r
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ * See the License for the specific language governing permissions and\r
+ * limitations under the License.\r
+ */\r
+\r
+\r
+/**\r
+* \file phNfcConfig.h\r
+* \brief HAL Configurations\r
+*\r
+*\r
+* \note This is the configuration header file of the HAL 4.0.All configurable parameters of the HAL 4.0\r
+* are provided in this file\r
+*\r
+* Project: NFC-FRI-1.1 / HAL4.0\r
+*\r
+* $Date: Thu Sep 9 14:56:35 2010 $\r
+* $Author: ing04880 $\r
+* $Revision: 1.39 $\r
+* $Aliases: $\r
+*\r
+*/\r
+\r
+\r
+/*@{*/\r
+#ifndef PHNFC_CONFIG_H\r
+#define PHNFC_CONFIG_H\r
+/*@}*/\r
+\r
+\r
+/**\r
+* \name Hal\r
+*\r
+* File: \ref phNfcConfig.h\r
+*\r
+*/\r
+\r
+/*@{*/\r
+#define PH_NFC_CONFIG_FILEREVISION "$Revision: 1.39 $" /**< \ingroup grp_file_attributes */\r
+#define PH_NFC_CONFIG_FILEALIASES "$Aliases: $" /**< \ingroup grp_file_attributes */\r
+/*@}*/\r
+\r
+\r
+/* -----------------Include files ---------------------------------------*/\r
+\r
+#ifdef NFC_CUSTOM_CONFIG_INCLUDE\r
+#include<nfc_custom_config.h>\r
+#endif\r
+\r
+/* ---------------- Macros ----------------------------------------------*/\r
+\r
+\r
+\r
+/*\r
+ *****************************************************************\r
+ ********************** DEFAULT MACROS **************************\r
+ *****************************************************************\r
+ */\r
+\r
+\r
+/**< External Clock Request Configuration for the NFC Device,\r
+ 0x00U No Clock Request,\r
+ 0x01U Clock Request through CLKREQ pin (GPIO pin 2),\r
+ 0x02U Clock Request through NXP_EVT_CLK_REQUEST Event,\r
+ */\r
+#ifndef NXP_DEFAULT_CLK_REQUEST\r
+#define NXP_DEFAULT_CLK_REQUEST 0x00U\r
+#endif\r
+\r
+/**< External Input Clock Setting for the NFC Device,\r
+ 0x00U No Input Clock Required (Use the Xtal),\r
+ 0x01U 13 MHZ,\r
+ 0x02U 19.2 MHZ,\r
+ 0x03U 26 MHZ,\r
+ 0x04U 38.4 MHZ,\r
+ 0x05U Custom (Set the Custome Clock Registry),\r
+ */\r
+\r
+#ifndef NXP_DEFAULT_INPUT_CLK\r
+#define NXP_DEFAULT_INPUT_CLK 0x00U\r
+#endif\r
+\r
+/**< UICC Power Request configuration for the NFC Device,\r
+ 0x00U No Power Request,\r
+ 0x01U Power Request through CLKREQ pin (GPIO pin 2),\r
+ 0x02U Power Request through PWR_REQUEST (GPIO Pin 3),\r
+ */\r
+\r
+#ifndef NXP_UICC_PWR_REQUEST\r
+#define NXP_UICC_PWR_REQUEST 0x00U\r
+#endif\r
+\r
+/**< TX LDO Configuration\r
+ 0x00 00b 3.0 V,\r
+ 0x01 01b 3.0 V,\r
+ 0x02 10b 2.7 V,\r
+ 0x03 11b 3.3 V,\r
+ */\r
+\r
+#ifndef NXP_DEFAULT_TX_LDO\r
+#define NXP_DEFAULT_TX_LDO 0x00U\r
+#endif\r
+\r
+/**< UICC Bit Rate Configuration\r
+ 0x02 212Kbits/Sec\r
+ 0x04 424Kbits/Sec\r
+ 0x08 828Kbits/Sec\r
+ */\r
+\r
+#ifndef NXP_UICC_BIT_RATE\r
+#define NXP_UICC_BIT_RATE 0x08U\r
+#endif\r
+\r
+\r
+/**< Indicates PN544 Power Modes Configuration for the NFC Device,\r