-2007-11-06 Nick Clifton <nickc@redhat.com>
-
- * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke
- it to see if the optimizations should be applied.
- * config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call
- frame optimization if linker relaxation is not enabled.
-
-2007-11-05 Danny Smith <dannysmith@users.sourceforge.net>
-
- * read.c (ALIGN_LIMIT): Rename to ...
- (TC_ALIGN_LIMIT): Guard against prior definition.
- * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define.
-
-2007-11-01 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (xtensa_symbol_new_hook): New.
- (xtensa_mark_difference_of_two_symbols): New.
- (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols.
- * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol.
- (tc_symbol_new_hook): Define.
-
-2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Replace no_xsuf with
- no_ldsuf.
- (match_template): Likewise.
-
-2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii
- letter.
-
-2007-11-01 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Check addrprefixop0 to
- see if the address size override prefix changes the size of the
- first operand.
- (check_byte_reg): Don't warn if byteokintel is set.
- (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword
- is set.
- (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword
- is set.
-
-2007-10-31 Eric B. Weddington <eweddington@cso.atmel.com>
-
- * config/tc-avr.c (mcu_types): Remove devices that were never produced:
- attiny10, atmega83, atmega85, atmega603.
- * doc/c-avr.texi: Likewise.
-
-2007-10-30 Nick Clifton <nickc@redhat.com>
-
- * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when
- sym_diff relocs should be generated.
- (md_apply_fix): Skip R_MN10300_ALIGN relocs.
- (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs.
- (mn10300_handle_align): New function. Generate R_MN10300_ALIGN
- relocs to record alignment requests.
- * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force
- R_MN10300_ALIGN relocs.
- (HANDLE_ALIGN): Define. Call mn10300_handle_align.
-
-2007-10-30 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Section): Replace "subsegment" with
- "subsection".
-
-2007-10-27 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5221
- * config/obj-elf.c (obj_elf_section): Handle optional
- parameters for .pushsection.
-
- * doc/as.texinfo: Document optional parameters for
- .pushsection.
-
-2007-10-24 H.J. Lu <hongjiu.lu@intel.com>
-
- * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE.
- * configure: Regenerated.
-
-2007-10-24 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE.
- Run "make dep-am".
- * configure.in: Invoke AC_GNU_SOURCE.
- * Makefile.in: Regenerate.
- * config.in: Regenerate.
- * configure: Regenerate.
-
-2007-10-19 Nick Clifton <nickc@redhat.com>
-
- * expr.c (expr): Test md_allow_local_subtract (if defined) before
- allowing the evaluation of an expression involving two symbols
- defined in the same section.
- * doc/internals.texi (md_allow_local_subtract): Document the new
- macro.
- * config/tc-mn10300.h (md_allow_local_subtract): Define.
- (RELAX_EXPANSION_POSSIBLE): Define.
- (MAX_RELOC_EXPANSION): Define.
- (TC_FRAG_TYPE): Define.
- * config/tc-mn10300.c (md_assemble): Mark fragments as containing code.
- (tc_gen_reloc): Return an array of relocs. If necessary generate
- two relocs to handle an expressions involving the difference of
- two symbols.
- (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL
- when then fixup is not pc-relative.
- (mn10300_allow_local_subtract): New function. Determine when it
- is safe to compute the difference between two symbols at assemble
- time.
-
-2007-10-19 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
- (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
- chars that can start a name.
-
-2007-10-18 Carlos O'Donell <carlos@systemhalted.org>
-
- * config/tc-hppa.c (pa_ip): Fix comment typo.
- (pa_comm): Likewise.
-
-2007-10-18 Nick Clifton <nickc@redhat.com>
-
- PR gas/5172
- * config/tc-arc.c (md_estimate_size_before_relax): Change error
- message.
- (md_convert_frag): Just call abort.
- * config/tc-i860.c (md_estimate_size_before_relax): Change error
- message.
- * config/tc-i860.h (md_convert_frag): Just call abort.
- * config/tc-ip2k.c (md_estimate_size_before_relax): Change error
- message.
- (md_convert_frag): Just call abort.
- * config/tc-m68k.c (m68k_ip): Do not attempt translation of
- architecture names.
- PR gas/5174
- * config/tc-arm.c: Fix formatting and spelling errors.
- PR gas/5175
- * config/tc-xc16x.c: Fix formatting and internationalization.
- * po/gas.pot: Regenerate.
-
-2007-10-17 Nick Clifton <nickc@redhat.com>
-
- PR gas/5173
- * as.h (ieee_md_atof, vax_md_atof): New prototypes.
- * read.c (s_float_space): Allow a zero length return from md_atof
- if the error message has been set.
- (float_cons): Likewise.
- * config/atof-ieee.c (ieee_md_atof): New function. Performs the
- md_atof() function in a generic way for IEEE using targets.
- * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the
- same error message as ieee_md_atof.
- * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof.
- * tc-arc.c (md_atof): Use ieee_md_atof.
- * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the
- constant 2. Use a precision of 5 for the 'x' and 'p' types.
- * tc-avr.c (md_atof): Use ieee_md_atof.
- * tc-bfin.c (md_atof): Use ieee_md_atof.
- * tc-cr16.c (md_atof): Use ieee_md_atof.
- * tc-crx.c (md_atof): Use ieee_md_atof.
- * tc-d10v.c (md_atof): Use ieee_md_atof.
- * tc-d30v.c (md_atof): Use ieee_md_atof.
- * tc-dlx.c (md_atof): Use ieee_md_atof.
- * tc-fr30.c (md_atof): Use ieee_md_atof.
- * tc-frv.c (md_atof): Use ieee_md_atof.
- * tc-h8300.c (md_atof): Use ieee_md_atof.
- * tc-hppa.c (md_atof): Use ieee_md_atof.
- * tc-i370.c (md_atof): Use ieee_md_atof.
- (i370_dc): Convert the 'E' type to 'f' before calling md_atof.
- * tc-i386.c (md_atof): Use ieee_md_atof.
- * tc-i860.c (md_atof): Use ieee_md_atof.
- * tc-i960.c (md_atof): Use ieee_md_atof.
- * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof.
- * tc-ip2k.c (md_atof): Use ieee_md_atof.
- * tc-iq2000.c (md_atof): Use ieee_md_atof.
- * tc-m32c.c (md_atof): Use ieee_md_atof.
- * tc-m32r.c (md_atof): Use ieee_md_atof.
- * tc-m68hc11.c (md_atof): Use ieee_md_atof.
- * tc-m68k.c (md_atof): Use ieee_md_atof.
- * tc-maxq.c (md_atof): Use ieee_md_atof.
- * tc-mcore.c (md_atof): Use ieee_md_atof.
- * tc-mep.c (md_atof): Use ieee_md_atof.
- * tc-mips.c (md_atof): Use ieee_md_atof.
- * tc-mmix.c (md_atof): Use ieee_md_atof.
- * tc-mn10200.c (md_atof): Use ieee_md_atof.
- * tc-mn10300.c (md_atof): Use ieee_md_atof.
- * tc-msp430.c (md_atof): Use ieee_md_atof.
- * tc-mt.c (md_atof): Use ieee_md_atof.
- * tc-ns32k.c (md_atof): Use ieee_md_atof.
- * tc-openrisc.c (md_atof): Use ieee_md_atof.
- * tc-or32.c (md_atof): Use ieee_md_atof.
- * tc-pdp11.c (md_atof): New function. Call vax_md_atof.
- * tc-pj.c (md_atof): Use ieee_md_atof.
- * tc-ppc.c (md_atof): Use ieee_md_atof.
- * tc-s390.c (md_atof): Use ieee_md_atof.
- * tc-score.c (md_atof): Use ieee_md_atof.
- * tc-sh.c (md_atof): Use ieee_md_atof.
- * tc-sparc.c (md_atof): Use ieee_md_atof.
- * tc-spu.c (md_atof): Use ieee_md_atof.
- * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof.
- * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof.
- * tc-tic54.c (md_atof): Use ieee_md_atof.
- * tc-v850.c (md_atof): Use ieee_md_atof.
- * tc-vax.c (md_atof): New function. Call vax_md_atof.
- * tc-xc16x.c (md_atof): Use ieee_md_atof.
- * tc-xstormy16.c (md_atof): Use ieee_md_atof.
- * tc-xtensa.c (md_atof): Use ieee_md_atof.
- * tc-z8k.c (md_atof): Use ieee_md_atof.
- * doc/internals.texi: Update description of md_atof function.
- * po/gas.pot: Regenerate.
-
-2007-10-16 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo (Overview): Add Xtensa --rename-section option.
-
-2007-10-16 Nick Clifton <nickc@redhat.com>
-
- * config/obj-elf.c (obj_elf_type): Accept "common" as a valid
- symbol type.
- * doc/as.texinfo (.type): Document the types accepted by the
- type pseudo op, including "common".
-
-2007-10-15 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
- according to major opcode number.
-
-2007-10-15 Alan Modra <amodra@bigpond.net.au>
-
- * read.c (do_s_func): Check asprintf return status.
- * stabs.c (stabs_generate_asm_func): Likewise.
- (stabs_generate_asm_endfunc): Likewise.
-
-2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_operands): Simplify implicit xmm0
- handling.
-
-2007-10-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_operands): Check the firstxmm0
- field in opcode_modifier for instruction with a implicit
- xmm0 as the first operand.
-
-2007-10-12 Eric B. Weddington <eweddington@cso.atmel.com>
-
- * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B,
- AT90PWM3B.
- * doc/c-avr.texi: Document new devices.
-
-2007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
-
- * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc>
- instruction range information.
-
-2007-10-12 Daniel Jacobowitz <dan@codesourcery.com>
-
- * doc/as.texinfo (Object Attributes): New chapter.
- (Pseudo Ops): Document .gnu_attribute.
- (LNS directives): Correct .loc_mark_labels documentation.
-
-2007-10-11 Nick Clifton <nickc@redhat.com>
-
- * config/obj-elf.c (obj_elf_section): When pushing a section, if
- there is a comma then the following argument must be a subsection
- number.
-
-2007-10-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi: Update which instruction's operands are
- swapped.
-
-2007-10-11 Nick Clifton <nickc@redhat.com>
-
- PR gas/5161
- * config/tc-ia64.c: Allow for translations of error and warning
- messages.
- * po/gas.pot: Regenerate.
-
- PR gas/5158
- * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error
- message.
- * po/gas.pot: Regenerate.
-
- PR gas/5155
- * config/tc-msp430.c: Fix spelling typos.
-
-2007-10-11 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION.
-
-2007-10-08 Maciej W. Rozycki <macro@linux-mips.org>
-
- * config/tc-mips.c (AT): Rename to...
- (ATREG): ... this.
- (AT): New definition.
- (mips_set_options): Rename "noat" to "at"; change the type.
- (mips_opts): Update accordingly.
- (append_insn): Likewise.
- (macro_build_ldst_constoffset): Likewise.
- (load_address): Likewise.
- (macro, macro2): Likewise.
- (s_mipsset): Handle ".set at=REG". Update handling of ".set at"
- and ".set noat".
-
-2007-10-08 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Previous): Clarify explanation of the behaviour
- of this pseudo-op and add a couple of examples.
-
-2007-10-08 Nick Clifton <nickc@redhat.com>
-
- PR gas/5121 gas/5122 gas/5123
- * Makefile.am (CFILES): Add cgen.c
- (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c,
- tc-tic4x.c and xtensa-relax.c.
- (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h,
- tc-tic4x.h and xtensa-relax.h.
- (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h,
- te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h,
- te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h.
- (CONFIG_ATOF_CFILES): New variable.
- (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with
- dependency upon TARG_ENV_HFILES.
- (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into
- cgen-desc.h when foo-desc.h does not exit.
- Run make dep-am.
- * Makefile.in: Regenerate.
- * doc/Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
- PR gas/5124 gas/5125
- * po/es.po: Regenerate.
- * po/fr.po: Regenerate.
- * po/gas.pot: Regenerate.
- * po/rw.po: Regenerate.
- * po/tr.po: Regenerate.
- * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation
- of error messages.
- PR gas/5126
- * config/obj-som.c: Likewise.
- PR gas/5129
- * config/tc-arc.c: Likewise.
- PR gas/5131 gas/5132
- * config/tc-arm.c: Likewise.
- PR gas/5137
- * config/tc-bfin.c: Likewise.
- PR gas/5143
- * config/tc-frv.c: Likewise.
- PR gas/5142
- * config/tc-dlx.c: Likewise.
-
-2007-10-08 Eric B. Weddington <eweddington@cso.atmel.com>
-
- * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U,
- ATtiny48, AT90PWM216, AT90PWM316.
- * doc/c-avr.texi: Document new devices.
-
-2007-10-08 Nick Clifton <nickc@redhat.com>
-
- PR gas/5133
- * config/tc-arm.c (md_apply_fix): Correct error message.
- PR gas/5134
- * config/tc-arm.c (md_apply_fix): Likewise.
- PR gas/5136
- * config/tc-bfin.c (md_apply_fix): Fix error message.
- PR gas/5135
- (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages.
-
-2007-10-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit
- immediate operands directly for instructions with 4 operands.
-
-2007-10-04 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5109
- * config/tc-i386.c (process_suffix): Clear QWORD suffix if it
- is ignored in Intel mode.
-
-2007-10-04 Helge Deller <deller@gmx.de>
-
- * read.c (potable): Add string8, string16, string32 and string64.
- Add bit size for stringer function.
- (stringer_append_char): New.
- (stringer): Use stringer_append_char().
- * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
- * config/obj-elf.c (obj_elf_ident): Likewise.
- * config/tc-alpha.c (s_alpha_stringer): Likewise.
- * config/tc-dlx.c (dlx_pseudo_table): Likewise.
- * config/tc-hppa.c (pa_stringer): Likewise.
- * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
- * config/tc-m68hc11.c (md_pseudo_table): Likewise.
- * config/tc-mcore.c (md_pseudo_table): Likewise.
- * config/tc-mips.c (mips_pseudo_table): Likewise.
- * config/tc-spu.c (md_pseudo_table): Likewise.
- * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
- * doc/as.texinfo (ABORT): Fix identing.
- (String): Document new string8, string16, string32, string64
- functions.
- * NEWS: Mention the new feature.
-
-2007-10-03 Nick Clifton <nickc@redhat.com>
-
- PR gas/5078
- * config/tc-avr.c (avr_get_constant): Extend error message to
- mention that the constant must be positive.
-
-2007-10-03 Nick Clifton <nickc@redhat.com>
-
- * config/tc-avr.c (avr_get_constant):
- PR gas/5089
- * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo.
- PR gas/5090
- (md_assemble): Fix spelling typo.
-
-2007-10-03 Alan Modra <amodra@bigpond.net.au>
-
- PR 4303
- * stabs.c (aout_process_stab): Set BSF_DEBUGGING.
-
-2007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
-
- * config/tc-cr16.c: Replaced 'tabs' with white spaces and
- added R_CR16_DISP8 as default reloc type for b<cc> instructions.
-
-2007-09-30 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5080
- * config/tc-i386.c (check_long_reg): Also handle cvttss2si.
- (check_qword_reg): Also handle cvttsd2si.
-
-2007-09-27 Kazu Hirata <kazu@codesourcery.com>
-
- * config/m68k-parse.h (m68k_register): Use MBO instead of MBB.
- (last_movec_reg): Change to MBO.
- * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB.
- (m68k_ip): Use MBO instead of MBO.
- (init_table): Use MBO instead of MBO. Add an entry for mbo.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (build_modrm_byte): Also check for RegEip
- when considering IP-relative addressing.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.h (md_register_arithmetic): Define.
- * config/tc-ia64.h (md_register_arithmetic): Likewise.
- * doc/internals.texi: Document md_register_arithmetic.
- * expr.c (make_expr_symbol): Force O_register expressions into
- reg_section.
- (expr): Provide default for md_register_arithmetic. Don't resolve
- adding/subtracting constants to/from registers if
- md_register_arithmetic is zero.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP.
- (cfi_finish): Add second empty instance.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-ia64.c (dot_pred_rel): Replace specialized handling
- with simple call to parse_operand.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (NUM_FLAG_CODE): Remove.
-
-2007-09-26 Jan Beulich <jbeulich@novell.com>
-
- * as.c (itbl_parse): Remove #define.
- (struct itbl_file_list): Move down and ...
- (itbl_files): .. conditionalize upon HAVE_ITBL_CPU.
- (show_usage): Conditionalize printing of --itbl option upon
- HAVE_ITBL_CPU.
- (parse_args): Conditionalize handling of -t/--itbl options upon
- HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with
- 't'.
-
-2007-09-25 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (output_insn): Use i.tm.opcode_length to
- check opcode length.
-
-2007-09-25 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New.
- (BRANCHBWPL, FRAG_VAR_SIZE): New.
- (md_relax_table): Add BRANCHBWPL entries.
- (m68k_ip): Choose BRANCHBWPL relaxation if necessary.
- (md_assemble): Use FRAG_VAR_SIZE.
- (md_convert_frag_1): Add BRANCHBWPL cases.
- (md_estimate_size_before_relaz): Likewise.
-
-2007-09-24 Carlos O'Donell <carlos@codesourcery.com>
-
- * config/tc-mips.c (s_align): Set max_alignment to 28.
-
-2007-09-20 H.J. Lu <hongjiu.lu@intel.com>
-
- PR 658
- * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed.
- (set_allow_index_reg): New.
- (allow_index_reg): Likewise.
- (md_pseudo_table): Add "allow_index_reg" and
- "disallow_index_reg".
- (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for
- fake index registers.
- (i386_scale): Updated.
- (i386_index_check): Support fake index registers.
- (parse_real_register): Return NULL on eiz/riz if fake index
- registers aren't allowed.
-
-2007-09-19 Nick Clifton <nickc@redhat.com>
-
- * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte
- fixups.
-
-2007-09-19 Bob Wilson <bob.wilson@acm.org>
-
- * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo.
-
-2007-09-18 Bernd Schmidt <bernd.schmidt@analog.com>
-
- * config/bfin-parse.y (asm_1): Slightly improve error messages
- for "reg += const;".
-
-2007-09-18 Alan Modra <amodra@bigpond.net.au>
-
- PR gas/5026
- * read.c (emit_expr): Only use long long if required and available.
-
-2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (baseindex): Removed.
- (build_modrm_byte): Check reg_num for RIP register instead of
- reg_type.
- (i386_index_check): Likewise.
-
-2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5035
- * config/obj-coff.c (obj_coff_endef): Remove checking size of
- def_symbol_in_progress.
-
-2007-09-17 Evandro Menezes <evandro@yahoo.com>
-
- PR gas/5026
- * read.c (emit_expr): Use unsigned long long values in warning
- message about truncated expressions.
-
-2007-09-17 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (intel_e04): Revert the last change.
-
-2007-09-17 Nick Clifton <nickc@redhat.com>
-
- * po/es.po: Updated Spanish translation.
-
-2007-09-15 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5034
- * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is
- T_NIL.
-
-2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Adjust comment line
- wrap.
-
-2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Use (A || B) instead
- of (A || B) != 0.
-
-2007-09-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Adjust indentation.
-
-2007-09-14 Michael Meissner <michael.meissner@amd.com>
- Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
- Tony Linthicum <tony.linthicum@amd.com>
-
- * NEWS: Add SSE5 support to NEWS file.
-
- * config/tc-i386.h (drex_byte): Add fields to allow process_drex
- and build_modrm_byte to communicate.
- (DREX_OC0): New SSE5 macro.
- (DREX_OC0_MASK): Ditto.
- (DREX_OC1): Ditto.
- (DREX_OC1_MASK): Ditto.
- (DREX_XMEM_X1_X2_X2): Ditto.
- (DREX_X1_XMEM_X2_X2): Ditto.
- (DREX_X1_XMEM_X2_X1: Ditto.
- (DREX_X1_X2_XMEM_X1: Ditto.
- (DREX_XMEM_X1_X2): Ditto.
- (DREX_X1_XMEM_X2): Ditto.
- (drex_byte): New structure to describe the DREX byte.
-
- * config/tc-i386.c (process_drex): New function to handle SSE5
- DREX bits.
- (build_modrm_byte): Use the information cached away in
- process_drex in the case of DREX instructions.
- (i386_insn): Add drex field.
- (pi): Add debugging of drex field.
- (md_assemble): Treat SSE5 like SSE3 in instructions with an
- immediate byte. Move REX field to DREX if this is a DREX
- instruction.
- (process_operands): Add SSE5 support.
- (build_modrm_byte): Ditto.
- (output_insn): Ditto.
- (cpu_arch): Ditto.
- (i386_align_code): Ditto.
-
-2007-09-12 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (md_assemble): Move handling of extrq/insertq
- after generic operand swapping, and swap only the immediate operands.
-
-2007-09-11 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (m68k_ip): Add mcfisa_c case.
- (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV.
-
-2007-09-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3
- byte opcode.
-
-2007-09-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_flags_check_x64): Renamed to ...
- (cpu_flags_check_cpu64): This. Inline.
- (uints_all_zero): New.
- (uints_set): Likewise
- (uints_equal): Likewise
- (UINTS_ALL_ZERO): Likewise
- (UINTS_SET): Likewise
- (UINTS_CLEAR): Likewise
- (UINTS_EQUAL): Likewise
- (cpu_flags_and): Likewise.
- (cpu_flags_or): Likewise.
- (operand_type_and): Likewise.
- (operand_type_or): Likewise.
- (operand_type_xor): Likewise.
- (cpu_flags_not): Inline and use switch instead of loop.