-
- The driver uses graphic specific defines/parameters/functions:
-
- (for SMI LynxE graphic chip)
-
- CONFIG_VIDEO_SMI_LYNXEM - use graphic driver for SMI 710,712,810
- VIDEO_FB_LITTLE_ENDIAN - framebuffer organisation default: big endian
- VIDEO_HW_RECTFILL - graphic driver supports hardware rectangle fill
- VIDEO_HW_BITBLT - graphic driver supports hardware bit blt
-
- Console Parameters are set by graphic drivers global struct:
-
- VIDEO_VISIBLE_COLS - x resolution
- VIDEO_VISIBLE_ROWS - y resolution
- VIDEO_PIXEL_SIZE - storage size in byte per pixel
- VIDEO_DATA_FORMAT - graphical data format GDF
- VIDEO_FB_ADRS - start of video memory
-
- CONFIG_I8042_KBD - AT Keyboard driver for i8042
- VIDEO_KBD_INIT_FCT - init function for keyboard
- VIDEO_TSTC_FCT - keyboard_tstc function
- VIDEO_GETC_FCT - keyboard_getc function
-
- CONFIG_CONSOLE_CURSOR - on/off drawing cursor is done with delay
- loop in VIDEO_TSTC_FCT (i8042)
- CONFIG_SYS_CONSOLE_BLINK_COUNT - value for delay loop - blink rate
- CONFIG_CONSOLE_TIME - display time/date in upper right corner,
- needs CONFIG_CMD_DATE and CONFIG_CONSOLE_CURSOR
- CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner
- CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo
- CONFIG_CONSOLE_EXTRA_INFO - display additional board information strings
- that normaly goes to serial port. This define
- requires a board specific function:
- video_drawstring (VIDEO_INFO_X,
- VIDEO_INFO_Y + i*VIDEO_FONT_HEIGHT,
- info);
- that fills a info buffer at i=row.
- s.a: board/eltec/bab7xx.
-CONFIG_VGA_AS_SINGLE_DEVICE - If set the framebuffer device will be initialised
- as an output only device. The Keyboard driver
- will not be set-up. This may be used, if you
- have none or more than one Keyboard devices
- (USB Keyboard, AT Keyboard).
-
-CONFIG_VIDEO_SW_CURSOR: - Draws a cursor after the last character. No
- blinking is provided. Uses the macros CURSOR_SET
- and CURSOR_OFF.
-CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
- graphic chip. Uses the macro CURSOR_SET.
- ATTENTION: If booting an OS, the display driver
- must disable the hardware register of the graphic
- chip. Otherwise a blinking field is displayed
-*/
+ *
+ * The driver uses graphic specific defines/parameters/functions:
+ *
+ * (for SMI LynxE graphic chip)
+ *
+ * CONFIG_VIDEO_SMI_LYNXEM - use graphic driver for SMI 710,712,810
+ * VIDEO_FB_LITTLE_ENDIAN - framebuffer organisation default: big endian
+ * VIDEO_HW_RECTFILL - graphic driver supports hardware rectangle fill
+ * VIDEO_HW_BITBLT - graphic driver supports hardware bit blt
+ *
+ * Console Parameters are set by graphic drivers global struct:
+ *
+ * VIDEO_VISIBLE_COLS - x resolution
+ * VIDEO_VISIBLE_ROWS - y resolution
+ * VIDEO_PIXEL_SIZE - storage size in byte per pixel
+ * VIDEO_DATA_FORMAT - graphical data format GDF
+ * VIDEO_FB_ADRS - start of video memory
+ *
+ * CONFIG_I8042_KBD - AT Keyboard driver for i8042
+ * VIDEO_KBD_INIT_FCT - init function for keyboard
+ * VIDEO_TSTC_FCT - keyboard_tstc function
+ * VIDEO_GETC_FCT - keyboard_getc function
+ *
+ * CONFIG_CONSOLE_CURSOR - on/off drawing cursor is done with
+ * delay loop in VIDEO_TSTC_FCT (i8042)
+ *
+ * CONFIG_SYS_CONSOLE_BLINK_COUNT - value for delay loop - blink rate
+ * CONFIG_CONSOLE_TIME - display time/date in upper right
+ * corner, needs CONFIG_CMD_DATE and
+ * CONFIG_CONSOLE_CURSOR
+ * CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner
+ * CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo
+ * CONFIG_CONSOLE_EXTRA_INFO - display additional board information
+ * strings that normaly goes to serial
+ * port. This define requires a board
+ * specific function:
+ * video_drawstring (VIDEO_INFO_X,
+ * VIDEO_INFO_Y + i*VIDEO_FONT_HEIGHT,
+ * info);
+ * that fills a info buffer at i=row.
+ * s.a: board/eltec/bab7xx.
+ * CONFIG_VGA_AS_SINGLE_DEVICE - If set the framebuffer device will be
+ * initialized as an output only device.
+ * The Keyboard driver will not be
+ * set-up. This may be used, if you have
+ * no or more than one Keyboard devices
+ * (USB Keyboard, AT Keyboard).
+ *
+ * CONFIG_VIDEO_SW_CURSOR: - Draws a cursor after the last
+ * character. No blinking is provided.
+ * Uses the macros CURSOR_SET and
+ * CURSOR_OFF.
+ *
+ * CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability
+ * of the graphic chip. Uses the macro
+ * CURSOR_SET. ATTENTION: If booting an
+ * OS, the display driver must disable
+ * the hardware register of the graphic
+ * chip. Otherwise a blinking field is
+ * displayed.
+ */