pinctrl: meson: axg: Fix GPIO pin offsets

[platform/kernel/u-boot.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3532c2a..516188e 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -18,6 +18,13 @@ config DM_SPI
 
 if DM_SPI
 
 
 if DM_SPI
 

+config SPI_MEM
+       bool "SPI memory extension"
+       help
+         Enable this option if you want to enable the SPI memory extension.
+         This extension is meant to simplify interaction with SPI memories
+         by providing an high-level interface to send memory-like commands.
+

 config ALTERA_SPI
        bool "Altera SPI driver"
        help
 config ALTERA_SPI
        bool "Altera SPI driver"
        help


@@ -66,6 +73,13 @@ config BCM63XX_SPI
          access the SPI NOR flash on platforms embedding these Broadcom
          SPI cores.
 
          access the SPI NOR flash on platforms embedding these Broadcom
          SPI cores.
 

+config BCMSTB_SPI
+       bool "BCMSTB SPI driver"
+       help
+         Enable the Broadcom set-top box SPI driver. This driver can
+         be used to access the SPI flash on platforms embedding this
+         Broadcom SPI core.
+

 config CADENCE_QSPI
        bool "Cadence QSPI driver"
        help
 config CADENCE_QSPI
        bool "Cadence QSPI driver"
        help


@@ -102,6 +116,14 @@ config ICH_SPI
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 
          access the SPI NOR flash on platforms embedding this Intel
          ICH IP core.
 

+config MT7621_SPI
+       bool "MediaTek MT7621 SPI driver"
+       depends on ARCH_MT7620
+       help
+         Enable the MT7621 SPI driver. This driver can be used to access
+         the SPI NOR flash on platforms embedding this Ralink / MediaTek
+         SPI core, like MT7621/7628/7688.
+

 config MVEBU_A3700_SPI
        bool "Marvell Armada 3700 SPI driver"
        select CLK_ARMADA_3720
 config MVEBU_A3700_SPI
        bool "Marvell Armada 3700 SPI driver"
        select CLK_ARMADA_3720


@@ -118,6 +140,14 @@ config PIC32_SPI
          to access the SPI NOR flash, MMC-over-SPI on platforms based on
          Microchip PIC32 family devices.
 
          to access the SPI NOR flash, MMC-over-SPI on platforms based on
          Microchip PIC32 family devices.
 

+config PL022_SPI
+       bool "ARM AMBA PL022 SSP controller driver"
+       depends on ARM
+       help
+         This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+         controller. If you have an embedded system with an AMBA(R)
+         bus and a PL022 controller, say Y or M here.
+

 config RENESAS_RPC_SPI
        bool "Renesas RPC SPI driver"
        depends on RCAR_GEN3
 config RENESAS_RPC_SPI
        bool "Renesas RPC SPI driver"
        depends on RCAR_GEN3


@@ -167,6 +197,11 @@ config STM32_QSPI
          used to access the SPI NOR flash chips on platforms embedding
          this ST IP core.
 
          used to access the SPI NOR flash chips on platforms embedding
          this ST IP core.
 

+config SUN4I_SPI
+       bool "Allwinner A10 SoCs SPI controller"
+       help
+         SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
+

 config TEGRA114_SPI
        bool "nVidia Tegra114 SPI driver"
        help
 config TEGRA114_SPI
        bool "nVidia Tegra114 SPI driver"
        help


@@ -208,7 +243,7 @@ config XILINX_SPI
 
 config ZYNQ_SPI
        bool "Zynq SPI driver"
 
 config ZYNQ_SPI
        bool "Zynq SPI driver"

-       depends on ARCH_ZYNQ || ARCH_ZYNQMP
+       depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL

        help
          Enable the Zynq SPI driver. This driver can be used to
          access the SPI NOR flash on platforms embedding this Zynq
        help
          Enable the Zynq SPI driver. This driver can be used to
          access the SPI NOR flash on platforms embedding this Zynq


@@ -223,6 +258,13 @@ config ZYNQ_QSPI
          Zynq QSPI IP core. This IP is used to connect the flash in
          4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 
          Zynq QSPI IP core. This IP is used to connect the flash in
          4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
 

+config ZYNQMP_GQSPI
+       bool "Configure ZynqMP Generic QSPI"
+       depends on ARCH_ZYNQMP || ARCH_VERSAL
+       help
+         This option is used to enable ZynqMP QSPI controller driver which
+         is used to communicate with qspi flash devices.
+

 endif # if DM_SPI
 
 config SOFT_SPI
 endif # if DM_SPI
 
 config SOFT_SPI