serial, kconfig: fix menutext

[platform/kernel/u-boot.git] / drivers / serial / Kconfig

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b26ada3..c64f4a6 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -4,6 +4,15 @@
 
 menu "Serial drivers"
 
 
 menu "Serial drivers"
 

+config BAUDRATE
+       int "Default baudrate"
+       default 115200
+       help
+         Select a default baudrate, where "default" has a driver-specific
+         meaning of either setting the baudrate for the early debug UART
+         in the SPL stage (most drivers) or for choosing a default baudrate
+         in the absence of an environment setting (serial_mxc.c).
+

 config REQUIRE_SERIAL_CONSOLE
        bool "Require a serial port for console"
        # Running without a serial console is not supported by the
 config REQUIRE_SERIAL_CONSOLE
        bool "Require a serial port for console"
        # Running without a serial console is not supported by the


@@ -35,6 +44,17 @@ config SPL_SERIAL_PRESENT
          This option enables the full UART in SPL, so if is it disabled,
          the full UART driver will be omitted, thus saving space.
 
          This option enables the full UART in SPL, so if is it disabled,
          the full UART driver will be omitted, thus saving space.
 

+config CONS_INDEX
+       int "UART used for console"
+       depends on ARCH_SUNXI
+       default 2 if MACH_SUN5I
+       default 5 if MACH_SUN8I_A23 || MACH_SUN8I_A33
+       default 1
+       help
+         Configures the console index.
+         For Allwinner SoC., default values are 2 for SUN5I and 5 for A23/A33.
+         Otherwise, the index equals 1.
+

 config DM_SERIAL
        bool "Enable Driver Model for serial drivers"
        depends on DM
 config DM_SERIAL
        bool "Enable Driver Model for serial drivers"
        depends on DM


@@ -44,6 +64,26 @@ config DM_SERIAL
          implements serial_putc() etc. The uclass interface is
          defined in include/serial.h.
 
          implements serial_putc() etc. The uclass interface is
          defined in include/serial.h.
 

+config SPL_DM_SERIAL
+       bool "Enable Driver Model for serial drivers in SPL"
+       depends on DM_SERIAL
+       default y if SPL && DM_SERIAL
+       help
+         Enable driver model for serial in SPL. This replaces
+         drivers/serial/serial.c with the serial uclass, which
+         implements serial_putc() etc. The uclass interface is
+         defined in include/serial.h.
+
+config TPL_DM_SERIAL
+       bool "Enable Driver Model for serial drivers in TPL"
+       depends on DM_SERIAL
+       default y if TPL && DM_SERIAL
+       help
+         Enable driver model for serial in TPL. This replaces
+         drivers/serial/serial.c with the serial uclass, which
+         implements serial_putc() etc. The uclass interface is
+         defined in include/serial.h.
+

 config DEBUG_UART
        bool "Enable an early debug UART for debugging"
        help
 config DEBUG_UART
        bool "Enable an early debug UART for debugging"
        help


@@ -105,6 +145,14 @@ config DEBUG_UART_ATMEL
          will need to provide parameters to make this work. The driver will
          be available until the real driver-model serial is running.
 
          will need to provide parameters to make this work. The driver will
          be available until the real driver-model serial is running.
 

+config DEBUG_UART_BCM6345
+       bool "BCM6345 UART"
+       depends on BCM6345_SERIAL
+       help
+         Select this to enable a debug UART on BCM6345 SoCs. You
+         will need to provide parameters to make this work. The driver will
+         be available until the real driver model serial is running.
+

 config DEBUG_UART_NS16550
        bool "ns16550"
        help
 config DEBUG_UART_NS16550
        bool "ns16550"
        help


@@ -209,6 +257,13 @@ config DEBUG_UART_UNIPHIER
          driver will be available until the real driver-model serial is
          running.
 
          driver will be available until the real driver-model serial is
          running.
 

+config DEBUG_UART_OMAP
+       bool "OMAP uart"
+       help
+         Select this to enable a debug UART using the omap ns16550 driver.
+         You will need to provide parameters to make this work. The driver
+         will be available until the real driver model serial is running.
+

 endchoice
 
 config DEBUG_UART_BASE
 endchoice
 
 config DEBUG_UART_BASE


@@ -310,6 +365,12 @@ config ATMEL_USART
          configured in the device tree, and input clock frequency can
          be got from the clk node.
 
          configured in the device tree, and input clock frequency can
          be got from the clk node.
 

+config BCM6345_SERIAL
+       bool "Support for BCM6345 UART"
+       depends on DM_SERIAL && ARCH_BMIPS
+       help
+         Select this to enable UART on BCM6345 SoCs.
+

 config FSL_LPUART
        bool "Freescale LPUART support"
        help
 config FSL_LPUART
        bool "Freescale LPUART support"
        help


@@ -347,12 +408,21 @@ config SYS_NS16550
          be used. It can be a constant or a function to get clock, eg,
          get_serial_clock().
 
          be used. It can be a constant or a function to get clock, eg,
          get_serial_clock().
 

+config INTEL_MID_SERIAL
+       bool "Intel MID platform UART support"
+       depends on DM_SERIAL && OF_CONTROL
+       depends on INTEL_MID
+       select SYS_NS16550
+       help
+         Select this to enable a UART for Intel MID platforms.
+         This uses the ns16550 driver as a library.
+

 config ROCKCHIP_SERIAL
        bool "Rockchip on-chip UART support"
        depends on DM_SERIAL && SPL_OF_PLATDATA
        help
          Select this to enable a debug UART for Rockchip devices when using
 config ROCKCHIP_SERIAL
        bool "Rockchip on-chip UART support"
        depends on DM_SERIAL && SPL_OF_PLATDATA
        help
          Select this to enable a debug UART for Rockchip devices when using

-         CONFIG_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).
+         CONFIG_SPL_OF_PLATDATA (i.e. a compiled-in device tree replacemenmt).

          This uses the ns16550 driver, converting the platdata from of-platdata
          to the ns16550 format.
 
          This uses the ns16550 driver, converting the platdata from of-platdata
          to the ns16550 format.
 


@@ -413,4 +483,12 @@ config PXA_SERIAL
          If you have a machine based on a Marvell XScale PXA2xx CPU you
          can enable its onboard serial ports by enabling this option.
 
          If you have a machine based on a Marvell XScale PXA2xx CPU you
          can enable its onboard serial ports by enabling this option.
 

+config STI_ASC_SERIAL
+       bool "STMicroelectronics on-chip UART"
+       depends on DM_SERIAL && ARCH_STI
+       help
+         Select this to enable Asynchronous Serial Controller available
+         on STiH410 SoC. This is a basic implementation,  it supports
+         following baudrate 9600, 19200, 38400, 57600 and 115200.
+

 endmenu
 endmenu