Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians...

[platform/kernel/u-boot.git] / drivers / pci / Kconfig

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index f59803d..65498bc 100644 (file)
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -30,6 +30,7 @@ config PCI_AARDVARK
        bool "Enable Aardvark PCIe driver"
        default n
        depends on DM_PCI
        bool "Enable Aardvark PCIe driver"
        default n
        depends on DM_PCI

+       depends on DM_GPIO

        depends on ARMADA_3700
        help
          Say Y here if you want to enable PCIe controller support on
        depends on ARMADA_3700
        help
          Say Y here if you want to enable PCIe controller support on


@@ -43,6 +44,35 @@ config PCI_PNP
        help
          Enable PCI memory and I/O space resource allocation and assignment.
 
        help
          Enable PCI memory and I/O space resource allocation and assignment.
 

+config PCI_REGION_MULTI_ENTRY
+       bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
+       depends on PCI || DM_PCI
+       default n
+       help
+         Enable PCI memory regions to be of multiple entry. Multiple entry
+         here refers to allow more than one count of address ranges for MEMORY
+         region type. This helps to add support for SoC's like OcteonTX/TX2
+         where every peripheral is on the PCI bus.
+
+config PCI_SRIOV
+       bool "Enable Single Root I/O Virtualization support for PCI"
+       depends on PCI || DM_PCI
+       default n
+       help
+         Say Y here if you want to enable PCI Single Root I/O Virtualization
+         capability support. This helps to enumerate Virtual Function devices
+         if available on a PCI Physical Function device and probe for
+         applicable drivers.
+
+config PCI_ARID
+        bool "Enable Alternate Routing-ID support for PCI"
+        depends on PCI || DM_PCI
+        default n
+        help
+          Say Y here if you want to enable Alternate Routing-ID capability
+          support on PCI devices. This helps to skip some devices in BDF
+          scan that are not present.
+

 config PCIE_ECAM_GENERIC
        bool "Generic ECAM-based PCI host controller support"
        default n
 config PCIE_ECAM_GENERIC
        bool "Generic ECAM-based PCI host controller support"
        default n


@@ -51,6 +81,13 @@ config PCIE_ECAM_GENERIC
          Say Y here if you want to enable support for generic ECAM-based
          PCIe host controllers, such as the one emulated by QEMU.
 
          Say Y here if you want to enable support for generic ECAM-based
          PCIe host controllers, such as the one emulated by QEMU.
 

+config PCI_PHYTIUM
+       bool "Phytium PCIe support"
+       depends on DM_PCI
+       help
+         Say Y here if you want to enable PCIe controller support on
+         Phytium SoCs.
+

 config PCIE_DW_MVEBU
        bool "Enable Armada-8K PCIe driver (DesignWare core)"
        depends on DM_PCI
 config PCIE_DW_MVEBU
        bool "Enable Armada-8K PCIe driver (DesignWare core)"
        depends on DM_PCI


@@ -60,6 +97,21 @@ config PCIE_DW_MVEBU
          Armada-8K SoCs. The PCIe controller on Armada-8K is based on
          DesignWare hardware.
 
          Armada-8K SoCs. The PCIe controller on Armada-8K is based on
          DesignWare hardware.
 

+config PCIE_FSL
+       bool "FSL PowerPC PCIe support"
+       depends on DM_PCI
+       help
+         Say Y here if you want to enable PCIe controller support on FSL
+         PowerPC MPC85xx, MPC86xx, B series, P series and T series SoCs.
+         This driver does not support SRIO_PCIE_BOOT feature.
+
+config PCI_MPC85XX
+       bool "MPC85XX PowerPC PCI support"
+       depends on DM_PCI
+       help
+         Say Y here if you want to enable PCI controller support on FSL
+         PowerPC MPC85xx SoC.
+

 config PCI_RCAR_GEN2
        bool "Renesas RCar Gen2 PCIe driver"
        depends on DM_PCI
 config PCI_RCAR_GEN2
        bool "Renesas RCar Gen2 PCIe driver"
        depends on DM_PCI


@@ -69,6 +121,14 @@ config PCI_RCAR_GEN2
          Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
          also used to access EHCI USB controller on the SoC.
 
          Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
          also used to access EHCI USB controller on the SoC.
 

+config PCI_RCAR_GEN3
+       bool "Renesas RCar Gen3 PCIe driver"
+       depends on DM_PCI
+       depends on RCAR_GEN3
+       help
+         Say Y here if you want to enable PCIe controller support on
+         Renesas RCar Gen3 SoCs.
+

 config PCI_SANDBOX
        bool "Sandbox PCI support"
        depends on SANDBOX && DM_PCI
 config PCI_SANDBOX
        bool "Sandbox PCI support"
        depends on SANDBOX && DM_PCI


@@ -81,7 +141,7 @@ config PCI_SANDBOX
 
 config PCI_TEGRA
        bool "Tegra PCI support"
 
 config PCI_TEGRA
        bool "Tegra PCI support"

-       depends on TEGRA
+       depends on ARCH_TEGRA

        depends on (TEGRA186 && POWER_DOMAIN) || (!TEGRA186)
        help
          Enable support for the PCIe controller found on some generations of
        depends on (TEGRA186 && POWER_DOMAIN) || (!TEGRA186)
        help
          Enable support for the PCIe controller found on some generations of


@@ -90,6 +150,14 @@ config PCI_TEGRA
          with a total of 5 lanes. Some boards require this for Ethernet
          support to work (e.g. beaver, jetson-tk1).
 
          with a total of 5 lanes. Some boards require this for Ethernet
          support to work (e.g. beaver, jetson-tk1).
 

+config PCI_OCTEONTX
+       bool "OcteonTX PCI support"
+       depends on (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+       help
+         Enable support for the OcteonTX/TX2 SoC family ECAM/PEM controllers.
+         These controllers provide PCI configuration access to all on-board
+         peripherals so it should only be disabled for testing purposes
+

 config PCI_XILINX
        bool "Xilinx AXI Bridge for PCI Express"
        depends on DM_PCI
 config PCI_XILINX
        bool "Xilinx AXI Bridge for PCI Express"
        depends on DM_PCI


@@ -98,12 +166,73 @@ config PCI_XILINX
          which can be used on some generations of Xilinx FPGAs.
 
 config PCIE_LAYERSCAPE
          which can be used on some generations of Xilinx FPGAs.
 
 config PCIE_LAYERSCAPE

-       bool "Layerscape PCIe support"
+       bool
+       default n
+
+config PCIE_LAYERSCAPE_RC
+       bool "Layerscape PCIe Root Complex mode support"
+       depends on DM_PCI
+       select PCIE_LAYERSCAPE
+       help
+         Enable Layerscape PCIe Root Complex mode driver support. The Layerscape
+         SoC may have one or several PCIe controllers. Each controller can be
+         configured to Root Complex mode by clearing the corresponding bit of
+         RCW[HOST_AGT_PEX].
+
+config PCI_IOMMU_EXTRA_MAPPINGS
+       bool "Support for specifying extra IOMMU mappings for PCI"
+       depends on PCIE_LAYERSCAPE_RC
+       help
+         Enable support for specifying extra IOMMU mappings for PCI
+         controllers through a special env var called "pci_iommu_extra" or
+         through a device tree property named "pci-iommu-extra" placed in
+         the node describing the PCI controller.
+         The intent is to cover SR-IOV scenarios which need mappings for VFs
+         and PCI hot-plug scenarios. More documentation can be found under:
+           arch/arm/cpu/armv8/fsl-layerscape/doc/README.pci_iommu_extra
+
+config PCIE_LAYERSCAPE_EP
+       bool "Layerscape PCIe Endpoint mode support"
+       depends on DM_PCI
+       select PCIE_LAYERSCAPE
+       select PCI_ENDPOINT
+       help
+         Enable Layerscape PCIe Endpoint mode driver support. The Layerscape
+         SoC may have one or several PCIe controllers. Each controller can be
+         configured to Endpoint mode by setting the corresponding bit of
+         RCW[HOST_AGT_PEX].
+
+config PCIE_LAYERSCAPE_GEN4
+       bool "Layerscape Gen4 PCIe support"

        depends on DM_PCI
        help
        depends on DM_PCI
        help

-         Support Layerscape PCIe. The Layerscape SoC may have one or several
-         PCIe controllers. The PCIe may works in RC or EP mode according to
-         RCW[HOST_AGT_PEX] setting.
+         Support PCIe Gen4 on NXP Layerscape SoCs, which may have one or
+         several PCIe controllers. The PCIe controller can work in RC or
+         EP mode according to RCW[HOST_AGT_PEX] setting.
+
+config FSL_PCIE_COMPAT
+       string "PCIe compatible of Kernel DT"
+       depends on PCIE_LAYERSCAPE_RC || PCIE_LAYERSCAPE_GEN4
+       default "fsl,ls1012a-pcie" if ARCH_LS1012A
+       default "fsl,ls1028a-pcie" if ARCH_LS1028A
+       default "fsl,ls1043a-pcie" if ARCH_LS1043A
+       default "fsl,ls1046a-pcie" if ARCH_LS1046A
+       default "fsl,ls2080a-pcie" if ARCH_LS2080A
+       default "fsl,ls1088a-pcie" if ARCH_LS1088A
+       default "fsl,lx2160a-pcie" if ARCH_LX2160A || ARCH_LX2162A
+       default "fsl,ls1021a-pcie" if ARCH_LS1021A
+       help
+         This compatible is used to find pci controller node in Kernel DT
+         to complete fixup.
+
+config FSL_PCIE_EP_COMPAT
+       string "PCIe EP compatible of Kernel DT"
+       depends on PCIE_LAYERSCAPE_RC || PCIE_LAYERSCAPE_GEN4
+       default "fsl,lx2160a-pcie-ep" if ARCH_LX2160A || ARCH_LX2162A
+       default "fsl,ls-pcie-ep"
+       help
+         This compatible is used to find pci controller ep node in Kernel DT
+         to complete fixup.

 
 config PCIE_INTEL_FPGA
        bool "Intel FPGA PCIe support"
 
 config PCIE_INTEL_FPGA
        bool "Intel FPGA PCIe support"


@@ -112,4 +241,53 @@ config PCIE_INTEL_FPGA
          Say Y here if you want to enable PCIe controller support on Intel
          FPGA, example Stratix 10.
 
          Say Y here if you want to enable PCIe controller support on Intel
          FPGA, example Stratix 10.
 

+config PCIE_IPROC
+       bool "Iproc PCIe support"
+       depends on DM_PCI
+       help
+         Broadcom iProc PCIe controller driver.
+         Say Y here if you want to enable Broadcom iProc PCIe controller,
+
+config PCI_MVEBU
+       bool "Enable Armada XP/38x PCIe driver"
+       depends on ARCH_MVEBU
+       select DM_PCI
+       select MISC
+       help
+         Say Y here if you want to enable PCIe controller support on
+         Armada XP/38x SoCs.
+
+config PCI_KEYSTONE
+       bool "TI Keystone PCIe controller"
+       depends on DM_PCI
+       help
+         Say Y here if you want to enable PCI controller support on AM654 SoC.
+
+config PCIE_MEDIATEK
+       bool "MediaTek PCIe Gen2 controller"
+       depends on DM_PCI
+       depends on ARCH_MEDIATEK
+       help
+         Say Y here if you want to enable Gen2 PCIe controller,
+         which could be found on MT7623 SoC family.
+
+config PCIE_ROCKCHIP
+       bool "Enable Rockchip PCIe driver"
+       depends on ARCH_ROCKCHIP
+       select DM_PCI
+       select PHY_ROCKCHIP_PCIE
+       default y if ROCKCHIP_RK3399
+       help
+         Say Y here if you want to enable PCIe controller support on
+         Rockchip SoCs.
+
+config PCI_BRCMSTB
+       bool "Broadcom STB PCIe controller"
+       depends on DM_PCI
+       depends on ARCH_BCM283X
+       help
+         Say Y here if you want to enable support for PCIe controller
+         on Broadcom set-top-box (STB) SoCs.
+         This driver currently supports only BCM2711 SoC and RC mode
+         of the controller.

 endif
 endif