Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians...

[platform/kernel/u-boot.git] / drivers / net / phy / Kconfig

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2a3da06..51733dd 100644 (file)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -46,7 +46,7 @@ config B53_PHY_PORTS
 endif # B53_SWITCH
 
 config MV88E61XX_SWITCH
 endif # B53_SWITCH
 
 config MV88E61XX_SWITCH

-       bool "Marvel MV88E61xx Ethernet switch PHY support."
+       bool "Marvell MV88E61xx Ethernet switch PHY support."

 
 if MV88E61XX_SWITCH
 
 
 if MV88E61XX_SWITCH
 


@@ -100,6 +100,37 @@ config PHY_BROADCOM
 config PHY_CORTINA
        bool "Cortina Ethernet PHYs support"
 
 config PHY_CORTINA
        bool "Cortina Ethernet PHYs support"
 

+config SYS_CORTINA_NO_FW_UPLOAD
+       bool "Cortina firmware loading support"
+       default n
+       depends on PHY_CORTINA
+       help
+               Cortina phy has provision to store phy firmware in attached dedicated
+               EEPROM. And boards designed with such EEPROM does not require firmware
+               upload.
+
+choice
+       prompt "Location of the Cortina firmware"
+       default SYS_CORTINA_FW_IN_NOR
+       depends on PHY_CORTINA
+
+config SYS_CORTINA_FW_IN_MMC
+       bool "Cortina firmware in MMC"
+
+config SYS_CORTINA_FW_IN_NAND
+       bool "Cortina firmware in NAND flash"
+
+config SYS_CORTINA_FW_IN_NOR
+       bool "Cortina firmware in NOR flash"
+
+config SYS_CORTINA_FW_IN_REMOTE
+       bool "Cortina firmware in remote device"
+
+config SYS_CORTINA_FW_IN_SPIFLASH
+       bool "Cortina firmware in SPI flash"
+
+endchoice
+

 config PHY_DAVICOM
        bool "Davicom Ethernet PHYs support"
 
 config PHY_DAVICOM
        bool "Davicom Ethernet PHYs support"
 


@@ -213,6 +244,15 @@ config RTL8211F_PHY_FORCE_EEE_RXC_ON
          Default n, which means that the PHY state is not changed. To work
          around the issues, change this setting to y.
 
          Default n, which means that the PHY state is not changed. To work
          around the issues, change this setting to y.
 

+config RTL8201F_PHY_S700_RMII_TIMINGS
+       bool "Ethernet PHY RTL8201F: adjust RMII Tx Interface timings"
+       depends on PHY_REALTEK
+       help
+         This provides an option to configure specific timing requirements (needed
+         for proper PHY operations) for the PHY module present on ACTION SEMI S700
+         based cubieboard7. Exact timing requiremnets seems to be SoC specific
+         (and it's undocumented) that comes from vendor code itself.
+

 config PHY_SMSC
        bool  "Microchip(SMSC) Ethernet PHYs support"
 
 config PHY_SMSC
        bool  "Microchip(SMSC) Ethernet PHYs support"
 


@@ -221,6 +261,21 @@ config PHY_TERANETICS
 
 config PHY_TI
        bool "Texas Instruments Ethernet PHYs support"
 
 config PHY_TI
        bool "Texas Instruments Ethernet PHYs support"

+       ---help---
+         Adds PHY registration support for TI PHYs.
+
+config PHY_TI_DP83867
+       select PHY_TI
+       bool "Texas Instruments Ethernet DP83867 PHY support"
+       ---help---
+         Adds support for the TI DP83867 1Gbit PHY.
+
+config PHY_TI_GENERIC
+       select PHY_TI
+       bool "Texas Instruments Generic Ethernet PHYs support"
+       ---help---
+         Adds support for Generic TI PHYs that don't need special handling but
+         the PHY name is associated with a PHY ID.

 
 config PHY_VITESSE
        bool "Vitesse Ethernet PHYs support"
 
 config PHY_VITESSE
        bool "Vitesse Ethernet PHYs support"


@@ -228,6 +283,13 @@ config PHY_VITESSE
 config PHY_XILINX
        bool "Xilinx Ethernet PHYs support"
 
 config PHY_XILINX
        bool "Xilinx Ethernet PHYs support"
 

+config PHY_XILINX_GMII2RGMII
+       bool "Xilinx GMII to RGMII Ethernet PHYs support"
+       help
+         This adds support for Xilinx GMII to RGMII IP core. This IP acts
+         as bridge between MAC connected over GMII and external phy that
+         is connected over RGMII interface.
+

 config PHY_FIXED
        bool "Fixed-Link PHY"
        depends on DM_ETH
 config PHY_FIXED
        bool "Fixed-Link PHY"
        depends on DM_ETH


@@ -238,4 +300,8 @@ config PHY_FIXED
          on, the link is always up with fixed speed and fixed duplex-setting.
          More information: doc/device-tree-bindings/net/fixed-link.txt
 
          on, the link is always up with fixed speed and fixed duplex-setting.
          More information: doc/device-tree-bindings/net/fixed-link.txt
 

+config PHY_NCSI
+       bool "NC-SI based PHY"
+       depends on DM_ETH
+

 endif #PHYLIB
 endif #PHYLIB