Convert CONFIG_LBA48 et al to Kconfig

[platform/kernel/u-boot.git] / drivers / ata / Kconfig

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5639536..7715c40 100644 (file)
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -9,6 +9,7 @@ config AHCI
 
 config SATA
        bool "Support SATA controllers"
 
 config SATA
        bool "Support SATA controllers"

+       depends on BLK

        select HAVE_BLOCK_DEVICE
        help
          This enables support for SATA (Serial Advanced Technology
        select HAVE_BLOCK_DEVICE
        help
          This enables support for SATA (Serial Advanced Technology


@@ -41,22 +42,14 @@ config AHCI_PCI
        help
          Enables support for the PCI-based AHCI controller.
 
        help
          Enables support for the PCI-based AHCI controller.
 

+if AHCI
+

 config SPL_AHCI_PCI
        bool "Support for PCI-based AHCI controller for SPL"
        depends on SPL
        depends on SPL_PCI
        depends on SPL_SATA_SUPPORT && DM_SCSI
 
 config SPL_AHCI_PCI
        bool "Support for PCI-based AHCI controller for SPL"
        depends on SPL
        depends on SPL_PCI
        depends on SPL_SATA_SUPPORT && DM_SCSI
 

-config SATA_CEVA
-       bool "Ceva Sata controller"
-       depends on AHCI
-       depends on DM_SCSI
-       help
-         This option enables Ceva Sata controller hard IP available on Xilinx
-         ZynqMP. Support up to 2 external devices. Complient with SATA 3.1 and
-         AHCI 1.3 specifications with hot-plug detect feature.
-
-

 config DWC_AHCI
        bool "Enable Synopsys DWC AHCI driver support"
        select SCSI_AHCI
 config DWC_AHCI
        bool "Enable Synopsys DWC AHCI driver support"
        select SCSI_AHCI


@@ -77,25 +70,67 @@ config DWC_AHSATA
 config DWC_AHSATA_AHCI
        bool "Enable DWC AHSATA AHCI driver support"
        depends on DWC_AHSATA
 config DWC_AHSATA_AHCI
        bool "Enable DWC AHSATA AHCI driver support"
        depends on DWC_AHSATA

-       depends on AHCI

        default y
        help
          Enable this option unless you need your private ahci implementation
 
        default y
        help
          Enable this option unless you need your private ahci implementation
 

+config MTK_AHCI
+       bool "Enable Mediatek AHCI driver support"
+       help
+         Enable this driver to support Sata devices through
+         Mediatek AHCI controller (e.g. MT7622).
+
+config AHCI_MVEBU
+       bool "Marvell EBU AHCI SATA support"
+       depends on ARCH_MVEBU || ARCH_OCTEON
+       select SCSI_AHCI
+       select DM_SCSI
+       help
+         This option enables support for the Marvell EBU SoC's
+         onboard AHCI SATA.
+
+         If unsure, say N.
+
+config SUNXI_AHCI
+       bool "Enable Allwinner SATA driver support"
+       default y if ARCH_SUNXI
+       help
+         Enable this driver to support the SATA controllers found in the
+         Allwinner A10, A20 and R40 SoCs.
+
+endif # AHCI
+
+if SATA
+
+config SATA_CEVA
+       bool "Ceva Sata controller"
+       depends on AHCI
+       depends on DM_SCSI
+       help
+         This option enables Ceva Sata controller hard IP available on Xilinx
+         ZynqMP. Support up to 2 external devices. Compliant with SATA 3.1 and
+         AHCI 1.3 specifications with hot-plug detect feature.
+

 config FSL_SATA
        bool "Enable Freescale SATA controller driver support"
 config FSL_SATA
        bool "Enable Freescale SATA controller driver support"

+       depends on PPC

        select AHCI
        select LIBATA
        select AHCI
        select LIBATA

-       depends on BLK
+       imply LBA48

        help
          Enable this driver to support the SATA controller found in
          some Freescale PowerPC SoCs.
 
        help
          Enable this driver to support the SATA controller found in
          some Freescale PowerPC SoCs.
 

+config FSL_SATA_V2
+       bool "Enable support for V2 of the Freescale SATA controller"
+       depends on FSL_SATA
+       help
+         Enable support for V2 of this controller, rather than V1.
+

 config SATA_MV
        bool "Enable Marvell SATA controller driver support"
        select AHCI
        select LIBATA
 config SATA_MV
        bool "Enable Marvell SATA controller driver support"
        select AHCI
        select LIBATA

-       depends on BLK

        help
          Enable this driver to support the SATA controller found in
          some Marvell SoCs.
        help
          Enable this driver to support the SATA controller found in
          some Marvell SoCs.


@@ -104,42 +139,20 @@ config SATA_SIL
        bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
        select AHCI
        select LIBATA
        bool "Enable Silicon Image SIL3131 / SIL3132 / SIL3124 SATA driver support"
        select AHCI
        select LIBATA

-       depends on BLK

        help
          Enable this driver to support the SIL3131, SIL3132 and SIL3124
          SATA controllers.
 
        help
          Enable this driver to support the SIL3131, SIL3132 and SIL3124
          SATA controllers.
 

-config SATA_SIL3114
-       bool "Enable Silicon Image SIL3114 SATA driver support"
-       select LIBATA
-       help
-         Enable this driver to support the SIL3114 SATA controllers.
-
-config SUNXI_AHCI
-       bool "Enable Allwinner SATA driver support"
-       depends on AHCI
-       default y if ARCH_SUNXI
-       help
-         Enable this driver to support the SATA controllers found in the
-         Allwinner A10, A20 and R40 SoCs.
-
-config AHCI_MVEBU
-       bool "Marvell EBU AHCI SATA support"
-       depends on ARCH_MVEBU || ARCH_OCTEON
-       depends on AHCI
-       select SCSI_AHCI
-       select DM_SCSI
+config SYS_SATA_MAX_DEVICE
+       int "Maximum number of SATA devices"
+       depends on !AHCI || FSL_SATA || SATA_MV

        help
        help

-         This option enables support for the Marvell EBU SoC's
-         onboard AHCI SATA.
+         Sets the maximum number of SATA devices which can be supported
+         by U-Boot.

 
 

-         If unsure, say N.
+         This is only partially converted to driver model. See sata_bread()
+         for example, which shows where the conversion needs to be completed.

 
 

-config MTK_AHCI
-       bool "Enable Mediatek AHCI driver support"
-       depends on AHCI
-       help
-         Enable this driver to support Sata devices through
-         Mediatek AHCI controller (e.g. MT7622).
+endif # SATA

 
 endmenu
 
 endmenu