+int UtcDaliImageViewFittingModeFitKeepAspectRatio(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using FitKeepAspectRatio ( image: [600,600], view: [600,700] )" );
+ tet_infoline( " There should be need to change the transform, offset is adjusted to fit inside");
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE , Toolkit::DevelVisual::FIT_KEEP_ASPECT_RATIO );
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(600,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ // If there's
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 50 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesFill(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using Fill ( image: [600,600], view: [600,700] )" );
+ tet_infoline( " There should be no need to change the transform, only size is changed to fit view");
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE , Toolkit::DevelVisual::FILL );
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(600,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2::ONE, TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_CHECK( value->Get< int >() == Toolkit::Visual::Transform::Policy::RELATIVE );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION ); // OFFSET is zero
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesOverfitKeepAspectRatio(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using OverFitKeepAspectRatio ( image: [600,600], view: [600,500] )" );
+ tet_infoline( " offset or size is the same as view, but adjust internally using pixelArea ");
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE , Toolkit::DevelVisual::OVER_FIT_KEEP_ASPECT_RATIO );
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(600,500) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ // If there's
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 500 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION ); // OFFSET is zero
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesCenter01(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using Center ( image: [600,600], view: [700,700] )" );
+ tet_infoline( " There should be need to change the transform, offset is adjusted to fit inside");
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE, Toolkit::DevelVisual::CENTER);
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(700,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 50, 50 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesCenter02(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using Center ( image: [600,600], view: [500,500] )" );
+ tet_infoline( " There should be need to change the transform, offset is adjusted to fit inside");
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE, Toolkit::DevelVisual::CENTER);
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(700,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 50, 50 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesFitHeight01(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using FitHeight ( image: [600,600], view: [600,700] )" );
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE, Toolkit::DevelVisual::FIT_HEIGHT);
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(600,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 700 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION ); // OFFSET is zero
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesFitHeight02(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using FitHeight ( image: [600,600], view: [700,600] )" );
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 249x169 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE, Toolkit::DevelVisual::FIT_HEIGHT);
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(700,600) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 50, 0 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesFitWidth01(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using FitWidth ( image: [600,600], view: [600,700] )" );
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 600x600 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE, Toolkit::DevelVisual::FIT_WIDTH);
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(600,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 50 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesFitWidth02(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using FitWidth ( image: [600,600], view:[700,600] )" );
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, Toolkit::Visual::IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, gImage_600_RGB ); // 249x169 image
+ imageMap.Add( DevelVisual::Property::VISUAL_FITTING_MODE, Toolkit::DevelVisual::FIT_WIDTH);
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(700,600) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 700, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION ); // OFFSET is zero
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesChangeFittingMode01(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "UtcDaliImageViewFittingModesChangeFittingMode, image: [600,600], view:[800,700]" );
+
+ ImageView imageView = ImageView::New();
+
+ // 1. Render using FittingMode::SHRINK_TO_FIT
+ Property::Map imageMap;
+ imageMap[ Toolkit::Visual::Property::TYPE ] = Toolkit::Visual::IMAGE;
+ imageMap[ Toolkit::ImageVisual::Property::URL ] = gImage_600_RGB;
+ imageMap[ DevelVisual::Property::VISUAL_FITTING_MODE ] = Toolkit::DevelVisual::FIT_KEEP_ASPECT_RATIO;
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(800,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 700, 700 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 50, 0 ), TEST_LOCATION );
+
+ // 2. Render again using DevelVisaul::CENTER
+ Property::Map imageMap2;
+ imageMap2[ Toolkit::Visual::Property::TYPE ] = Toolkit::Visual::IMAGE;
+ imageMap2[ Toolkit::ImageVisual::Property::URL ] = gImage_600_RGB;
+ imageMap2[ DevelVisual::Property::VISUAL_FITTING_MODE ] = Toolkit::DevelVisual::CENTER;
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap2 );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(800,700) );
+
+ application.GetScene().Add( imageView );
+
+ DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 1 ), true, TEST_LOCATION );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ returnedMap.Clear();
+ visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+
+ visual.CreatePropertyMap( returnedMap );
+
+ value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 100, 50 ), TEST_LOCATION );
+
+ // 3. Render again using before fittingMode
+ Property::Map imageMap3;
+ imageMap3[ Toolkit::Visual::Property::TYPE ] = Toolkit::Visual::IMAGE;
+ imageMap3[ Toolkit::ImageVisual::Property::URL ] = gImage_600_RGB;
+ imageMap3[ DevelVisual::Property::VISUAL_FITTING_MODE ] = Toolkit::DevelVisual::FIT_KEEP_ASPECT_RATIO;
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap3 );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(800,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ returnedMap.Clear();
+ visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ visual.CreatePropertyMap( returnedMap );
+
+ value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 700, 700 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 50, 0 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesChangeFittingMode02(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "UtcDaliImageViewFittingModesChangeFittingMode, image: [600,600], view:[800,700]" );
+
+ ImageView imageView = ImageView::New();
+
+ // 1. Render using FittingMode::OVER_FIT_KEEP_ASPECT_RATIO
+ Property::Map imageMap;
+ imageMap[ Toolkit::Visual::Property::TYPE ] = Toolkit::Visual::IMAGE;
+ imageMap[ Toolkit::ImageVisual::Property::URL ] = gImage_600_RGB;
+ imageMap[ DevelVisual::Property::VISUAL_FITTING_MODE ] = Toolkit::DevelVisual::OVER_FIT_KEEP_ASPECT_RATIO;
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(800,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 800, 700 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION );
+
+ // 2. Render again using DevelVisaul::CENTER
+ Property::Map imageMap2;
+ imageMap2[ Toolkit::Visual::Property::TYPE ] = Toolkit::Visual::IMAGE;
+ imageMap2[ Toolkit::ImageVisual::Property::URL ] = gImage_600_RGB;
+ imageMap2[ DevelVisual::Property::VISUAL_FITTING_MODE ] = Toolkit::DevelVisual::CENTER;
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap2 );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(800,700) );
+
+ application.GetScene().Add( imageView );
+
+ DALI_TEST_EQUALS( Test::WaitForEventThreadTrigger( 1 ), true, TEST_LOCATION );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ returnedMap.Clear();
+ visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+
+ visual.CreatePropertyMap( returnedMap );
+
+ value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 600, 600 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 100, 50 ), TEST_LOCATION );
+
+ // 3. Render again using before fittingMode
+ Property::Map imageMap3;
+ imageMap3[ Toolkit::Visual::Property::TYPE ] = Toolkit::Visual::IMAGE;
+ imageMap3[ Toolkit::ImageVisual::Property::URL ] = gImage_600_RGB;
+ imageMap3[ DevelVisual::Property::VISUAL_FITTING_MODE ] = Toolkit::DevelVisual::OVER_FIT_KEEP_ASPECT_RATIO;
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap3 );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(800,700) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ returnedMap.Clear();
+ visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ visual.CreatePropertyMap( returnedMap );
+
+ value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 800, 700 ), TEST_LOCATION ); // Change the internal size according to the image view size
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( Toolkit::Visual::Transform::Policy::ABSOLUTE, Toolkit::Visual::Transform::Policy::ABSOLUTE ), TEST_LOCATION );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliImageViewFittingModesWithAnimatedVectorImageVisual(void)
+{
+ ToolkitTestApplication application;
+
+ tet_infoline( "Create an ImageVisual using ScaleToFill and animated vector image ( image: [600,600], view:[600,600] )" );
+
+ ImageView imageView = ImageView::New();
+ Property::Map imageMap;
+ imageMap.Add( Toolkit::Visual::Property::TYPE, DevelVisual::ANIMATED_VECTOR_IMAGE );
+ imageMap.Add( Toolkit::ImageVisual::Property::URL, TEST_VECTOR_IMAGE_FILE_NAME ); // 249x169 image
+
+ imageView.SetProperty( Toolkit::ImageView::Property::IMAGE, imageMap );
+ imageView.SetProperty( Actor::Property::SIZE, Vector2(600,600) );
+
+ application.GetScene().Add( imageView );
+
+ // Trigger a potential relayout
+ application.SendNotification();
+ application.Render();
+
+ Toolkit::Visual::Base visual = DevelControl::GetVisual( Toolkit::Internal::GetImplementation( imageView ), Toolkit::ImageView::Property::IMAGE );
+ Property::Map returnedMap;
+ visual.CreatePropertyMap( returnedMap );
+
+ Property::Value* value = returnedMap.Find( Toolkit::Visual::Property::TRANSFORM );
+ DALI_TEST_CHECK( value );
+ Property::Map* map = value->GetMap();
+ DALI_TEST_CHECK( map );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2::ONE, TEST_LOCATION ); // Relative size so will take up 100%
+
+ value = map->Find( Toolkit::Visual::Transform::Property::SIZE_POLICY );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_CHECK( value->Get< int >() == Toolkit::Visual::Transform::Policy::RELATIVE );
+
+ value = map->Find( Toolkit::Visual::Transform::Property::OFFSET );
+ DALI_TEST_CHECK( value );
+ DALI_TEST_EQUALS( value->Get< Vector2 >(), Vector2( 0, 0 ), TEST_LOCATION ); // OFFSET is zero
+
+ END_TEST;
+}
+
+