Convert CONFIG_CMD_PCI to Kconfig

[platform/kernel/u-boot.git] / arch / arm / cpu / armv8 / fsl-layerscape / Kconfig

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 17b470d..1b98f5a 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -1,42 +1,93 @@
 config ARCH_LS1012A
        bool
 config ARCH_LS1012A
        bool

+       select ARMV8_SET_SMPEN

        select FSL_LSCH2
        select SYS_FSL_DDR_BE
        select SYS_FSL_MMDC
        select SYS_FSL_ERRATUM_A010315
        select FSL_LSCH2
        select SYS_FSL_DDR_BE
        select SYS_FSL_MMDC
        select SYS_FSL_ERRATUM_A010315

+       select ARCH_EARLY_INIT_R
+       select BOARD_EARLY_INIT_F

 
 config ARCH_LS1043A
        bool
 
 config ARCH_LS1043A
        bool

+       select ARMV8_SET_SMPEN

        select FSL_LSCH2
        select FSL_LSCH2

+       select SYS_FSL_DDR

        select SYS_FSL_DDR_BE
        select SYS_FSL_DDR_VER_50
        select SYS_FSL_DDR_BE
        select SYS_FSL_DDR_VER_50

+       select SYS_FSL_ERRATUM_A008850
+       select SYS_FSL_ERRATUM_A009660
+       select SYS_FSL_ERRATUM_A009663
+       select SYS_FSL_ERRATUM_A009929
+       select SYS_FSL_ERRATUM_A009942

        select SYS_FSL_ERRATUM_A010315
        select SYS_FSL_ERRATUM_A010539
        select SYS_FSL_ERRATUM_A010315
        select SYS_FSL_ERRATUM_A010539

+       select SYS_FSL_HAS_DDR3
+       select SYS_FSL_HAS_DDR4
+       select ARCH_EARLY_INIT_R
+       select BOARD_EARLY_INIT_F
+       imply SCSI
+       imply CMD_PCI

 
 config ARCH_LS1046A
        bool
 
 config ARCH_LS1046A
        bool

+       select ARMV8_SET_SMPEN

        select FSL_LSCH2
        select FSL_LSCH2

+       select SYS_FSL_DDR

        select SYS_FSL_DDR_BE
        select SYS_FSL_DDR_BE

-       select SYS_FSL_DDR4

        select SYS_FSL_DDR_VER_50
        select SYS_FSL_DDR_VER_50

+       select SYS_FSL_ERRATUM_A008336
+       select SYS_FSL_ERRATUM_A008511
+       select SYS_FSL_ERRATUM_A008850
+       select SYS_FSL_ERRATUM_A009801
+       select SYS_FSL_ERRATUM_A009803
+       select SYS_FSL_ERRATUM_A009942
+       select SYS_FSL_ERRATUM_A010165

        select SYS_FSL_ERRATUM_A010539
        select SYS_FSL_ERRATUM_A010539

+       select SYS_FSL_HAS_DDR4

        select SYS_FSL_SRDS_2
        select SYS_FSL_SRDS_2

+       select ARCH_EARLY_INIT_R
+       select BOARD_EARLY_INIT_F
+       imply SCSI

 
 config ARCH_LS2080A
        bool
 
 config ARCH_LS2080A
        bool

+       select ARMV8_SET_SMPEN
+       select ARM_ERRATA_826974
+       select ARM_ERRATA_828024
+       select ARM_ERRATA_829520
+       select ARM_ERRATA_833471

        select FSL_LSCH3
        select FSL_LSCH3

-       select SYS_FSL_DDR4
+       select SYS_FSL_DDR

        select SYS_FSL_DDR_LE
        select SYS_FSL_DDR_VER_50
        select SYS_FSL_HAS_DP_DDR
        select SYS_FSL_HAS_SEC
        select SYS_FSL_DDR_LE
        select SYS_FSL_DDR_VER_50
        select SYS_FSL_HAS_DP_DDR
        select SYS_FSL_HAS_SEC

+       select SYS_FSL_HAS_DDR4

        select SYS_FSL_SEC_COMPAT_5
        select SYS_FSL_SEC_COMPAT_5

+       select SYS_FSL_SEC_LE

        select SYS_FSL_SRDS_2
        select SYS_FSL_SRDS_2

+       select FSL_TZASC_1
+       select FSL_TZASC_2
+       select SYS_FSL_ERRATUM_A008336
+       select SYS_FSL_ERRATUM_A008511
+       select SYS_FSL_ERRATUM_A008514
+       select SYS_FSL_ERRATUM_A008585
+       select SYS_FSL_ERRATUM_A009635
+       select SYS_FSL_ERRATUM_A009663
+       select SYS_FSL_ERRATUM_A009801
+       select SYS_FSL_ERRATUM_A009803
+       select SYS_FSL_ERRATUM_A009942
+       select SYS_FSL_ERRATUM_A010165
+       select SYS_FSL_ERRATUM_A009203
+       select ARCH_EARLY_INIT_R
+       select BOARD_EARLY_INIT_F

 
 config FSL_LSCH2
        bool
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_COMPAT_5
 
 config FSL_LSCH2
        bool
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_COMPAT_5

+       select SYS_FSL_SEC_BE

        select SYS_FSL_SRDS_1
        select SYS_HAS_SERDES
 
        select SYS_FSL_SRDS_1
        select SYS_HAS_SERDES
 


@@ -45,32 +96,126 @@ config FSL_LSCH3
        select SYS_FSL_SRDS_1
        select SYS_HAS_SERDES
 
        select SYS_FSL_SRDS_1
        select SYS_HAS_SERDES
 

+config FSL_MC_ENET
+       bool "Management Complex network"
+       depends on ARCH_LS2080A
+       default y
+       select RESV_RAM
+       help
+         Enable Management Complex (MC) network
+

 menu "Layerscape architecture"
        depends on FSL_LSCH2 || FSL_LSCH3
 
 menu "Layerscape architecture"
        depends on FSL_LSCH2 || FSL_LSCH3
 

+config FSL_PCIE_COMPAT
+       string "PCIe compatible of Kernel DT"
+       depends on PCIE_LAYERSCAPE
+       default "fsl,ls1012a-pcie" if ARCH_LS1012A
+       default "fsl,ls1043a-pcie" if ARCH_LS1043A
+       default "fsl,ls1046a-pcie" if ARCH_LS1046A
+       default "fsl,ls2080a-pcie" if ARCH_LS2080A
+       help
+         This compatible is used to find pci controller node in Kernel DT
+         to complete fixup.
+
+config HAS_FEATURE_GIC64K_ALIGN
+       bool
+       default y if ARCH_LS1043A
+
+config HAS_FEATURE_ENHANCED_MSI
+       bool
+       default y if ARCH_LS1043A
+

 menu "Layerscape PPA"
 config FSL_LS_PPA
        bool "FSL Layerscape PPA firmware support"
        depends on !ARMV8_PSCI
 menu "Layerscape PPA"
 config FSL_LS_PPA
        bool "FSL Layerscape PPA firmware support"
        depends on !ARMV8_PSCI

-       depends on ARCH_LS1043A || ARCH_LS1046A
-       select FSL_PPA_ARMV8_PSCI
+       select ARMV8_SEC_FIRMWARE_SUPPORT
+       select SEC_FIRMWARE_ARMV8_PSCI
+       select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2

        help
          The FSL Primary Protected Application (PPA) is a software component
          which is loaded during boot stage, and then remains resident in RAM
          and runs in the TrustZone after boot.
          Say y to enable it.
 
        help
          The FSL Primary Protected Application (PPA) is a software component
          which is loaded during boot stage, and then remains resident in RAM
          and runs in the TrustZone after boot.
          Say y to enable it.
 

-config FSL_PPA_ARMV8_PSCI
-       bool "PSCI implementation in PPA firmware"
+config SPL_FSL_LS_PPA
+       bool "FSL Layerscape PPA firmware support for SPL build"
+       depends on !ARMV8_PSCI
+       select SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+       select SEC_FIRMWARE_ARMV8_PSCI
+       select ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT if FSL_LSCH2
+       help
+         The FSL Primary Protected Application (PPA) is a software component
+         which is loaded during boot stage, and then remains resident in RAM
+         and runs in the TrustZone after boot. This is to load PPA during SPL
+         stage instead of the RAM version of U-Boot. Once PPA is initialized,
+         the rest of U-Boot (including RAM version) runs at EL2.
+choice
+       prompt "FSL Layerscape PPA firmware loading-media select"

        depends on FSL_LS_PPA
        depends on FSL_LS_PPA

+       default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
+       default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
+       default SYS_LS_PPA_FW_IN_XIP
+
+config SYS_LS_PPA_FW_IN_XIP
+       bool "XIP"

        help
        help

-         This config enables the ARMv8 PSCI implementation in PPA firmware.
-         This is a private PSCI implementation and different from those
-         implemented under the common ARMv8 PSCI framework.
-endmenu
+         Say Y here if the PPA firmware locate at XIP flash, such
+         as NOR or QSPI flash.

 
 

-config SYS_FSL_MMDC
-       bool
+config SYS_LS_PPA_FW_IN_MMC
+       bool "eMMC or SD Card"
+       help
+         Say Y here if the PPA firmware locate at eMMC/SD card.
+
+config SYS_LS_PPA_FW_IN_NAND
+       bool "NAND"
+       help
+         Say Y here if the PPA firmware locate at NAND flash.
+
+endchoice
+
+config SYS_LS_PPA_FW_ADDR
+       hex "Address of PPA firmware loading from"
+       depends on FSL_LS_PPA
+       default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
+       default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+       default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
+       default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+       default 0x400000 if SYS_LS_PPA_FW_IN_MMC
+       default 0x400000 if SYS_LS_PPA_FW_IN_NAND
+
+       help
+         If the PPA firmware locate at XIP flash, such as NOR or
+         QSPI flash, this address is a directly memory-mapped.
+         If it is in a serial accessed flash, such as NAND and SD
+         card, it is a byte offset.
+
+config SYS_LS_PPA_ESBC_ADDR
+       hex "hdr address of PPA firmware loading from"
+       depends on FSL_LS_PPA && CHAIN_OF_TRUST
+       default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+       default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
+       default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
+       default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
+       default 0x700000 if SYS_LS_PPA_FW_IN_MMC
+       default 0x700000 if SYS_LS_PPA_FW_IN_NAND
+       help
+         If the PPA header firmware locate at XIP flash, such as NOR or
+         QSPI flash, this address is a directly memory-mapped.
+         If it is in a serial accessed flash, such as NAND and SD
+         card, it is a byte offset.
+
+config LS_PPA_ESBC_HDR_SIZE
+       hex "Length of PPA ESBC header"
+       depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
+       default 0x2000
+       help
+         Length (in bytes) of PPA ESBC header to be copied from MMC/SD or
+         NAND to memory to validate PPA image.
+
+endmenu

 
 config SYS_FSL_ERRATUM_A010315
        bool "Workaround for PCIe erratum A010315"
 
 config SYS_FSL_ERRATUM_A010315
        bool "Workaround for PCIe erratum A010315"


@@ -91,13 +236,8 @@ config MAX_CPUS
          cores, count the reserved ports. This will allocate enough memory
          in spin table to properly handle all cores.
 
          cores, count the reserved ports. This will allocate enough memory
          in spin table to properly handle all cores.
 

-config NUM_DDR_CONTROLLERS
-       int "Maximum DDR controllers"
-       default 3 if ARCH_LS2080A
-       default 1
-

 config SECURE_BOOT
 config SECURE_BOOT

-       bool
+       bool "Secure Boot"

        help
                Enable Freescale Secure Boot feature
 
        help
                Enable Freescale Secure Boot feature
 


@@ -127,49 +267,129 @@ config SYS_FSL_SRDS_2
 config SYS_HAS_SERDES
        bool
 
 config SYS_HAS_SERDES
        bool
 

-config SYS_FSL_DDR
-       bool "Freescale DDR driver"
-       help
-         Select Freescale General DDR driver, shared between most Freescale
-         PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
-         based Layerscape SoCs (such as ls2080a).
+config FSL_TZASC_1
+       bool

 
 

-config SYS_FSL_DDR_BE
+config FSL_TZASC_2

        bool
        bool

+
+endmenu
+
+menu "Layerscape clock tree configuration"
+       depends on FSL_LSCH2 || FSL_LSCH3
+
+config SYS_FSL_CLK
+       bool "Enable clock tree initialization"
+       default y
+
+config CLUSTER_CLK_FREQ
+       int "Reference clock of core cluster"
+       depends on ARCH_LS1012A
+       default 100000000
+       help
+         This number is the reference clock frequency of core PLL.
+         For most platforms, the core PLL and Platform PLL have the same
+         reference clock, but for some platforms, LS1012A for instance,
+         they are provided sepatately.
+
+config SYS_FSL_PCLK_DIV
+       int "Platform clock divider"
+       default 1 if ARCH_LS1043A
+       default 1 if ARCH_LS1046A
+       default 2

        help
        help

-         Access DDR registers in big-endian.
+         This is the divider that is used to derive Platform clock from
+         Platform PLL, in another word:
+               Platform_clk = Platform_PLL_freq / this_divider

 
 

-config SYS_FSL_DDR_LE
+config SYS_FSL_DSPI_CLK_DIV
+       int "DSPI clock divider"
+       default 1 if ARCH_LS1043A
+       default 2
+       help
+         This is the divider that is used to derive DSPI clock from Platform
+         clock, in another word DSPI_clk = Platform_clk / this_divider.
+
+config SYS_FSL_DUART_CLK_DIV
+       int "DUART clock divider"
+       default 1 if ARCH_LS1043A
+       default 2
+       help
+         This is the divider that is used to derive DUART clock from Platform
+         clock, in another word DUART_clk = Platform_clk / this_divider.
+
+config SYS_FSL_I2C_CLK_DIV
+       int "I2C clock divider"
+       default 1 if ARCH_LS1043A
+       default 2
+       help
+         This is the divider that is used to derive I2C clock from Platform
+         clock, in another word I2C_clk = Platform_clk / this_divider.
+
+config SYS_FSL_IFC_CLK_DIV
+       int "IFC clock divider"
+       default 1 if ARCH_LS1043A
+       default 2
+       help
+         This is the divider that is used to derive IFC clock from Platform
+         clock, in another word IFC_clk = Platform_clk / this_divider.
+
+config SYS_FSL_LPUART_CLK_DIV
+       int "LPUART clock divider"
+       default 1 if ARCH_LS1043A
+       default 2
+       help
+         This is the divider that is used to derive LPUART clock from Platform
+         clock, in another word LPUART_clk = Platform_clk / this_divider.
+
+config SYS_FSL_SDHC_CLK_DIV
+       int "SDHC clock divider"
+       default 1 if ARCH_LS1043A
+       default 1 if ARCH_LS1012A
+       default 2
+       help
+         This is the divider that is used to derive SDHC clock from Platform
+         clock, in another word SDHC_clk = Platform_clk / this_divider.
+endmenu
+
+config RESV_RAM

        bool
        help
        bool
        help

-         Access DDR registers in little-endian.
+         Reserve memory from the top, tracked by gd->arch.resv_ram. This
+         reserved RAM can be used by special driver that resides in memory
+         after U-Boot exits. It's up to implementation to allocate and allow
+         access to this reserved memory. For example, the reserved RAM can
+         be at the high end of physical memory. The reserve RAM may be
+         excluded from memory bank(s) passed to OS, or marked as reserved.

 
 

-config SYS_FSL_DDR_VER
-       int
-       default 50 if SYS_FSL_DDR_VER_50
+config SYS_FSL_ERRATUM_A008336
+       bool

 
 

-config SYS_FSL_DDR_VER_50
+config SYS_FSL_ERRATUM_A008514

        bool
 
        bool
 

-config SYS_FSL_DDRC_ARM_GEN3
+config SYS_FSL_ERRATUM_A008585

        bool
 
        bool
 

-config SYS_FSL_DDRC_GEN4
+config SYS_FSL_ERRATUM_A008850

        bool
 
        bool
 

-config SYS_FSL_DDR3
-       bool "Freescale DDR3 controller"
-       depends on !SYS_FSL_DDR4
-       select SYS_FSL_DDR
-       select SYS_FSL_DDRC_ARM_GEN3
-       help
-         Enable Freescale DDR3 controller on ARM-based SoCs.
+config SYS_FSL_ERRATUM_A009203
+       bool

 
 

-config SYS_FSL_DDR4
-       bool "Freescale DDR4 controller"
-       select SYS_FSL_DDR
-       select SYS_FSL_DDRC_GEN4
-       help
-         Enable Freescale DDR4 controller.
+config SYS_FSL_ERRATUM_A009635
+       bool

 
 

-endmenu
+config SYS_FSL_ERRATUM_A009660
+       bool
+
+config SYS_FSL_ERRATUM_A009929
+       bool
+
+config SYS_MC_RSV_MEM_ALIGN
+       hex "Management Complex reserved memory alignment"
+       depends on RESV_RAM
+       default 0x20000000
+       help
+         Reserved memory needs to be aligned for MC to use. Default value
+         is 512MB.