vbe: Drop the U-Boot prefix from the version

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index 4ef9e8c..ec1b50c 100644 (file)
--- a/README
+++ b/README
@@ -294,12 +294,6 @@ The following options need to be configured:
                the "64" category of the Power ISA). This is necessary for ePAPR
                compliance, among other possible reasons.
 
                the "64" category of the Power ISA). This is necessary for ePAPR
                compliance, among other possible reasons.
 

-               CONFIG_SYS_FSL_TBCLK_DIV
-
-               Defines the core time base clock divider ratio compared to the
-               system clock.  On most PQ3 devices this is 8, on newer QorIQ
-               devices it can be 16 or 32.  The ratio varies from SoC to Soc.
-

                CONFIG_SYS_FSL_ERRATUM_A004510
 
                Enables a workaround for erratum A004510.  If set,
                CONFIG_SYS_FSL_ERRATUM_A004510
 
                Enables a workaround for erratum A004510.  If set,


@@ -421,8 +415,6 @@ The following options need to be configured:
                the defaults discussed just above.
 
 - Cache Configuration for ARM:
                the defaults discussed just above.
 
 - Cache Configuration for ARM:

-               CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache
-                                     controller

                CONFIG_SYS_PL310_BASE - Physical base address of PL310
                                        controller register space
 
                CONFIG_SYS_PL310_BASE - Physical base address of PL310
                                        controller register space
 


@@ -571,20 +563,6 @@ The following options need to be configured:
                        CONFIG_LAN91C96_USE_32_BIT
                        Define this to enable 32 bit addressing
 
                        CONFIG_LAN91C96_USE_32_BIT
                        Define this to enable 32 bit addressing
 

-               CONFIG_SMC91111
-               Support for SMSC's LAN91C111 chip
-
-                       CONFIG_SMC91111_BASE
-                       Define this to hold the physical address
-                       of the device (I/O space)
-
-                       CONFIG_SMC_USE_32_BIT
-                       Define this if data bus is 32 bits
-
-                       CONFIG_SMC_USE_IOFUNCS
-                       Define this to use i/o functions instead of macros
-                       (some hardware wont work with macros)
-

                        CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
                        Define this if you have more then 3 PHYs.
 
                        CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
                        Define this if you have more then 3 PHYs.
 


@@ -792,80 +770,6 @@ The following options need to be configured:
 - Keyboard Support:
                See Kconfig help for available keyboard drivers.
 
 - Keyboard Support:
                See Kconfig help for available keyboard drivers.
 

-- LCD Support: CONFIG_LCD
-
-               Define this to enable LCD support (for output to LCD
-               display); also select one of the supported displays
-               by defining one of these:
-
-               CONFIG_NEC_NL6448AC33:
-
-                       NEC NL6448AC33-18. Active, color, single scan.
-
-               CONFIG_NEC_NL6448BC20
-
-                       NEC NL6448BC20-08. 6.5", 640x480.
-                       Active, color, single scan.
-
-               CONFIG_NEC_NL6448BC33_54
-
-                       NEC NL6448BC33-54. 10.4", 640x480.
-                       Active, color, single scan.
-
-               CONFIG_SHARP_16x9
-
-                       Sharp 320x240. Active, color, single scan.
-                       It isn't 16x9, and I am not sure what it is.
-
-               CONFIG_SHARP_LQ64D341
-
-                       Sharp LQ64D341 display, 640x480.
-                       Active, color, single scan.
-
-               CONFIG_HLD1045
-
-                       HLD1045 display, 640x480.
-                       Active, color, single scan.
-
-               CONFIG_OPTREX_BW
-
-                       Optrex   CBL50840-2 NF-FW 99 22 M5
-                       or
-                       Hitachi  LMG6912RPFC-00T
-                       or
-                       Hitachi  SP14Q002
-
-                       320x240. Black & white.
-
-               CONFIG_LCD_ALIGNMENT
-
-               Normally the LCD is page-aligned (typically 4KB). If this is
-               defined then the LCD will be aligned to this value instead.
-               For ARM it is sometimes useful to use MMU_SECTION_SIZE
-               here, since it is cheaper to change data cache settings on
-               a per-section basis.
-
-
-               CONFIG_LCD_ROTATION
-
-               Sometimes, for example if the display is mounted in portrait
-               mode or even if it's mounted landscape but rotated by 180degree,
-               we need to rotate our content of the display relative to the
-               framebuffer, so that user can read the messages which are
-               printed out.
-               Once CONFIG_LCD_ROTATION is defined, the lcd_console will be
-               initialized with a given rotation from "vl_rot" out of
-               "vidinfo_t" which is provided by the board specific code.
-               The value for vl_rot is coded as following (matching to
-               fbcon=rotate:<n> linux-kernel commandline):
-               0 = no rotation respectively 0 degree
-               1 = 90 degree rotation
-               2 = 180 degree rotation
-               3 = 270 degree rotation
-
-               If CONFIG_LCD_ROTATION is not defined, the console will be
-               initialized with 0degree rotation.
-

 - MII/PHY support:
                CONFIG_PHY_CLOCK_FREQ (ppc4xx)
 
 - MII/PHY support:
                CONFIG_PHY_CLOCK_FREQ (ppc4xx)