UBIFS: Missing offset relocation for compressor 'none'

[platform/kernel/u-boot.git] / README

diff --git a/README b/README
index b64c159..32d9acd 100644 (file)
--- a/README
+++ b/README
@@ -318,6 +318,11 @@ The following options need to be configured:
                that this requires a (stable) reference clock (32 kHz
                RTC clock or CONFIG_SYS_8XX_XIN)
 
                that this requires a (stable) reference clock (32 kHz
                RTC clock or CONFIG_SYS_8XX_XIN)
 

+               CONFIG_SYS_DELAYED_ICACHE
+
+               Define this option if you want to enable the
+               ICache only when Code runs from RAM.
+

 - Intel Monahans options:
                CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
 
 - Intel Monahans options:
                CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
 


@@ -631,6 +636,7 @@ The following options need to be configured:
                CONFIG_CMD_MISC           Misc functions like sleep etc
                CONFIG_CMD_MMC          * MMC memory mapped support
                CONFIG_CMD_MII          * MII utility commands
                CONFIG_CMD_MISC           Misc functions like sleep etc
                CONFIG_CMD_MMC          * MMC memory mapped support
                CONFIG_CMD_MII          * MII utility commands

+               CONFIG_CMD_MTDPARTS     * MTD partition support

                CONFIG_CMD_NAND         * NAND support
                CONFIG_CMD_NET            bootp, tftpboot, rarpboot
                CONFIG_CMD_PCA953X      * PCA953x I2C gpio commands
                CONFIG_CMD_NAND         * NAND support
                CONFIG_CMD_NET            bootp, tftpboot, rarpboot
                CONFIG_CMD_PCA953X      * PCA953x I2C gpio commands


@@ -2458,6 +2464,13 @@ use the "saveenv" command to store a valid environment.
 - CONFIG_SYS_64BIT_STRTOUL:
                Adds simple_strtoull that returns a 64bit value
 
 - CONFIG_SYS_64BIT_STRTOUL:
                Adds simple_strtoull that returns a 64bit value
 

+- CONFIG_NS16550_MIN_FUNCTIONS:
+               Define this if you desire to only have use of the NS16550_init
+               and NS16550_putc functions for the serial driver located at
+               drivers/serial/ns16550.c.  This option is useful for saving
+               space for already greatly restricted images, including but not
+               limited to NAND_SPL configurations.
+

 Low Level (hardware related) configuration options:
 ---------------------------------------------------
 
 Low Level (hardware related) configuration options:
 ---------------------------------------------------
 


@@ -2623,10 +2636,6 @@ Low Level (hardware related) configuration options:
                Only for 83xx systems. If specified, then DDR should
                be configured using CS0 and CS1 instead of CS2 and CS3.
 
                Only for 83xx systems. If specified, then DDR should
                be configured using CS0 and CS1 instead of CS2 and CS3.
 

-- CONFIG_SYS_83XX_DDR_USES_CS0
-               Only for 83xx systems. If specified, then DDR should
-               be configured using CS0 and CS1 instead of CS2 and CS3.
-

 - CONFIG_ETHER_ON_FEC[12]
                Define to enable FEC[12] on a 8xx series processor.
 
 - CONFIG_ETHER_ON_FEC[12]
                Define to enable FEC[12] on a 8xx series processor.