-########################################################################
-## ARM Integrator boards
-## There are two variants /AP && /CP
-## - many different core modules (CMs) can be used
-## - some share characteristics
-## Those without specific cpu support can still use U-Boot
-## provided the ARM boot monitor (or similar) runs before U-Boot
-## to set up the platform e.g. map writeable memory to 0x00000000
-## setup MMU, setup caches etc.
-## Ported cores are:-
-## ARM926EJ-S
-## ARM946E-S
-##
-########################################################################
-xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2))
-xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2))
-#########################################################################
-## Integrator/AP
-#########################################################################
-integratorap_config : unconfig
- @echo -n "/* Integrator configuration implied " > tmp.fil; \
- echo " by Makefile target */" >> tmp.fil; \
- echo >> tmp.fil
- @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
- echo " /* Integrator board */" >> tmp.fil; \
- echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
- echo " 1 /* Integrator/AP */" >> tmp.fil; \
- echo "/* Core module not defined */" >> tmp.fil; \
- echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
- echo -n " /* Integrator core module " >> tmp.fil; \
- echo "with unknown core */" >> tmp.fil; \
- cpu=arm_intcm; \
- mv tmp.fil ./include/config.h; \
- ubootlds=board/integratorap/u-boot.lds; \
- sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
- $$ubootlds > $$ubootlds.tmp; \
- mv -f $$ubootlds.tmp $$ubootlds; \
- ./mkconfig -a integratorap arm arm_intcm integratorap;
-
-integratorap_CM720T_config integratorap_CM7TDMI_config \
-integratorap_CM920T_config integratorap_CM920T_ETM_config \
-integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \
-integratorap_CM940T_config integratorap_CM946E_S_config \
-integratorap_CM966E_S_config integratorap_CM10200E_config \
-integratorap_CM10220E_config integratorap_CM1026EJ_S_config \
-integratorap_CM1136JF_S_config : unconfig
- @echo -n "/* Integrator configuration implied " > tmp.fil; \
- echo " by Makefile target */" >> tmp.fil; \
- echo >> tmp.fil
- @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
- echo " /* Integrator board */" >> tmp.fil; \
- echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
- echo " 1 /* Integrator/AP */" >> tmp.fil; \
- cm=$(call xtract_int_cm,ap,$@); \
- echo -n "#define CONFIG_$$cm " >> tmp.fil; \
- echo " /* core module */" >> tmp.fil; \
- case $$cm in \
- CM920T) \
- echo -n "#define CONFIG_ARM920" >> tmp.fil; \
- echo -n "T 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM920T" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm920t;; \
- CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
- echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM926EJ-S" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm926ejs;; \
- CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
- echo -n "E_S 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM946E-S" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm946es;; \
- *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
- echo -n "TCM 1 /* Int" >> tmp.fil; \
- echo -n "egrator core module w" >> tmp.fil; \
- echo -n "ith unported core" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm_intcm;; \
- esac; \
- mv tmp.fil ./include/config.h; \
- ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \
- sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
- $$ubootlds > $$ubootlds.tmp; \
- mv -f $$ubootlds.tmp $$ubootlds; \
- ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \
- $(call xtract_int_board,ap,$@);