ARM: DRA7: Enable EEPROM support

[platform/kernel/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index fc69189..e7002ed 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -114,6 +114,16 @@ config SPL
        help
          If you want to build SPL as well as the normal image, say Y.
 
        help
          If you want to build SPL as well as the normal image, say Y.
 

+config SPL_SYS_MALLOC_SIMPLE
+       bool
+       depends on SPL
+       prompt "Only use malloc_simple functions in the spl"
+       help
+         Say Y here to only use the *_simple malloc functions from
+         malloc_simple.c, rather then using the versions from dlmalloc.c
+         this will make the SPL binary smaller at the cost of more heap
+         usage as the *_simple malloc functions do not re-use free-ed mem.
+

 config SPL_STACK_R
        depends on SPL
        bool "Enable SDRAM location for SPL stack"
 config SPL_STACK_R
        depends on SPL
        bool "Enable SDRAM location for SPL stack"


@@ -132,6 +142,26 @@ config SPL_STACK_R_ADDR
          Specify the address in SDRAM for the SPL stack. This will be set up
          before board_init_r() is called.
 
          Specify the address in SDRAM for the SPL stack. This will be set up
          before board_init_r() is called.
 

+config SPL_STACK_R_MALLOC_SIMPLE_LEN
+       depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE
+       hex "Size of malloc_simple heap after switching to DRAM SPL stack"
+       default 0x100000
+       help
+         Specify the amount of the stack to use as memory pool for
+         malloc_simple after switching the stack to DRAM. This may be set
+         to give board_init_r() a larger heap then the initial heap in
+         SRAM which is limited to SYS_MALLOC_F_LEN bytes.
+
+config SPL_SEPARATE_BSS
+       depends on SPL
+       bool "BSS section is in a different memory region from text"
+       help
+         Some platforms need a large BSS region in SPL and can provide this
+         because RAM is already set up. In this case BSS can be moved to RAM.
+         This option should then be enabled so that the correct device tree
+         location is used. Normally we put the device tree at the end of BSS
+         but with this option enabled, it goes at _image_binary_end.
+

 config TPL
        bool
        depends on SPL && SUPPORT_TPL
 config TPL
        bool
        depends on SPL && SUPPORT_TPL


@@ -146,7 +176,11 @@ config FIT
          Flattened Image Tree.  FIT is formally a FDT, which can include
          images of various types (kernel, FDT blob, ramdisk, etc.)
          in a single blob.  To boot this new uImage structure,
          Flattened Image Tree.  FIT is formally a FDT, which can include
          images of various types (kernel, FDT blob, ramdisk, etc.)
          in a single blob.  To boot this new uImage structure,

-         pass the the address of the blob to the "bootm" command.
+         pass the address of the blob to the "bootm" command.
+         FIT is very flexible, supporting compression, multiple images,
+         multiple configurations, verification through hashing and also
+         verified boot (secure boot using RSA). This option enables that
+         feature.

 
 config FIT_VERBOSE
        bool "Display verbose messages on FIT boot"
 
 config FIT_VERBOSE
        bool "Display verbose messages on FIT boot"


@@ -161,8 +195,62 @@ config FIT_SIGNATURE
          This option enables signature verification of FIT uImages,
          using a hash signed and verified using RSA. If
          CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
          This option enables signature verification of FIT uImages,
          using a hash signed and verified using RSA. If
          CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive

-         hashing is available using hardware, RSA library will use it.
-         See doc/uImage.FIT/signature.txt for more details.
+         hashing is available using hardware, then then RSA library will use
+         it. See doc/uImage.FIT/signature.txt for more details.
+
+         WARNING: When relying on signed FIT images with a required signature
+         check the legacy image format is disabled by default, so that
+         unsigned images cannot be loaded. If a board needs the legacy image
+         format support in this case, enable it using
+         CONFIG_IMAGE_FORMAT_LEGACY.
+
+config FIT_BEST_MATCH
+       bool "Select the best match for the kernel device tree"
+       depends on FIT
+       help
+         When no configuration is explicitly selected, default to the
+         one whose fdt's compatibility field best matches that of
+         U-Boot itself. A match is considered "best" if it matches the
+         most specific compatibility entry of U-Boot's fdt's root node.
+         The order of entries in the configuration's fdt is ignored.
+
+config FIT_VERBOSE
+       bool "Show verbose messages when FIT images fails"
+       depends on FIT
+       help
+         Generally a system will have valid FIT images so debug messages
+         are a waste of code space. If you are debugging your images then
+         you can enable this option to get more verbose information about
+         failures.
+
+config OF_BOARD_SETUP
+       bool "Set up board-specific details in device tree before boot"
+       depends on OF_LIBFDT
+       help
+         This causes U-Boot to call ft_board_setup() before booting into
+         the Operating System. This function can set up various
+         board-specific information in the device tree for use by the OS.
+         The device tree is then passed to the OS.
+
+config OF_SYSTEM_SETUP
+       bool "Set up system-specific details in device tree before boot"
+       depends on OF_LIBFDT
+       help
+         This causes U-Boot to call ft_system_setup() before booting into
+         the Operating System. This function can set up various
+         system-specific information in the device tree for use by the OS.
+         The device tree is then passed to the OS.
+
+config OF_STDOUT_VIA_ALIAS
+       bool "Update the device-tree stdout alias from U-Boot"
+       depends on OF_LIBFDT
+       help
+         This uses U-Boot's serial alias from the aliases node to update
+         the device tree passed to the OS. The "linux,stdout-path" property
+         in the chosen node is set to point to the correct serial node.
+         This option currently references CONFIG_CONS_INDEX, which is
+         incorrect when used with device tree as this option does not
+         exist / should not be used.

 
 config SYS_EXTRA_OPTIONS
        string "Extra Options (DEPRECATED)"
 
 config SYS_EXTRA_OPTIONS
        string "Extra Options (DEPRECATED)"


@@ -178,11 +266,24 @@ config SYS_EXTRA_OPTIONS
          new boards should not use this option.
 
 config SYS_TEXT_BASE
          new boards should not use this option.
 
 config SYS_TEXT_BASE

-       depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP
+       depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
+               (M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE
+       depends on !EFI_APP

        hex "Text Base"
        help
          TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
 
        hex "Text Base"
        help
          TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture
 

+config SPL_LOAD_FIT
+       bool "Enable SPL loading U-Boot as a FIT"
+       depends on FIT
+       help
+         Normally with the SPL framework a legacy image is generated as part
+         of the build. This contains U-Boot along with information as to
+         where it should be loaded. This option instead enables generation
+         of a FIT (Flat Image Tree) which provides more flexibility. In
+         particular it can handle selecting from multiple device tree
+         and passing the correct one to U-Boot.
+

 config SYS_CLK_FREQ
        depends on ARC || ARCH_SUNXI
        int "CPU clock frequency"
 config SYS_CLK_FREQ
        depends on ARC || ARCH_SUNXI
        int "CPU clock frequency"


@@ -193,6 +294,8 @@ endmenu             # Boot images
 
 source "common/Kconfig"
 
 
 source "common/Kconfig"
 

+source "cmd/Kconfig"
+

 source "dts/Kconfig"
 
 source "net/Kconfig"
 source "dts/Kconfig"
 
 source "net/Kconfig"