arm64: versal: Setup DM_ETH/MMC if NET/MMC is enabled

[platform/kernel/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index c8b86cd..a078f7b 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -68,25 +68,26 @@ config CC_COVERAGE
 
 config DISTRO_DEFAULTS
        bool "Select defaults suitable for booting general purpose Linux distributions"
 
 config DISTRO_DEFAULTS
        bool "Select defaults suitable for booting general purpose Linux distributions"

-       imply USE_BOOTCOMMAND
-       select CMD_BOOTZ if ARM && !ARM64
+       select AUTO_COMPLETE
+       select CMDLINE_EDITING

        select CMD_BOOTI if ARM64
        select CMD_BOOTI if ARM64

+       select CMD_BOOTZ if ARM && !ARM64

        select CMD_DHCP if CMD_NET
        select CMD_DHCP if CMD_NET

-       select CMD_PING if CMD_NET
-       select CMD_PXE if NET

        select CMD_ENV_EXISTS
        select CMD_EXT2
        select CMD_EXT4
        select CMD_FAT
        select CMD_FS_GENERIC
        select CMD_ENV_EXISTS
        select CMD_EXT2
        select CMD_EXT4
        select CMD_FAT
        select CMD_FS_GENERIC

-       imply CMD_MII if NET

        select CMD_PART if PARTITIONS
        select CMD_PART if PARTITIONS

+       select CMD_PING if CMD_NET
+       select CMD_PXE if NET
+       select ENV_VARS_UBOOT_CONFIG

        select HUSH_PARSER
        select HUSH_PARSER

-       select CMDLINE_EDITING
-       select AUTO_COMPLETE
-       select SYS_LONGHELP

        select SUPPORT_RAW_INITRD
        select SUPPORT_RAW_INITRD

-       select ENV_VARS_UBOOT_CONFIG
+       select SYS_LONGHELP
+       imply CMD_MII if NET
+       imply USB_STORAGE
+       imply USE_BOOTCOMMAND

        help
          Select this to enable various options and commands which are suitable
          for building u-boot for booting general purpose Linux distributions.
        help
          Select this to enable various options and commands which are suitable
          for building u-boot for booting general purpose Linux distributions.


@@ -104,6 +105,12 @@ config ENV_VARS_UBOOT_CONFIG
          - CONFIG_SYS_VENDOR
          - CONFIG_SYS_SOC
 
          - CONFIG_SYS_VENDOR
          - CONFIG_SYS_SOC
 

+config NR_DRAM_BANKS
+       int "Number of DRAM banks"
+       default 4
+       help
+         This defines the number of DRAM banks.
+

 config SYS_BOOT_GET_CMDLINE
        bool "Enable kernel command line setup"
        help
 config SYS_BOOT_GET_CMDLINE
        bool "Enable kernel command line setup"
        help


@@ -119,6 +126,7 @@ config SYS_BOOT_GET_KBD
 config SYS_MALLOC_F
        bool "Enable malloc() pool before relocation"
        default y if DM
 config SYS_MALLOC_F
        bool "Enable malloc() pool before relocation"
        default y if DM

+

        help
          Before relocation, memory is very limited on many platforms. Still,
          we can provide a small malloc() pool if needed. Driver model in
        help
          Before relocation, memory is very limited on many platforms. Still,
          we can provide a small malloc() pool if needed. Driver model in


@@ -129,6 +137,7 @@ config SYS_MALLOC_F_LEN
        hex "Size of malloc() pool before relocation"
        depends on SYS_MALLOC_F
        default 0x1000 if AM33XX
        hex "Size of malloc() pool before relocation"
        depends on SYS_MALLOC_F
        default 0x1000 if AM33XX

+       default 0x2800 if SANDBOX

        default 0x400
        help
          Before relocation, memory is very limited on many platforms. Still,
        default 0x400
        help
          Before relocation, memory is very limited on many platforms. Still,


@@ -136,25 +145,32 @@ config SYS_MALLOC_F_LEN
          particular needs this to operate, so that it can allocate the
          initial serial device and any others that are needed.
 
          particular needs this to operate, so that it can allocate the
          initial serial device and any others that are needed.
 

+config SYS_MALLOC_LEN
+       hex "Define memory for Dynamic allocation"
+       depends on ARCH_ZYNQ || ARCH_VERSAL
+       help
+         This defines memory to be allocated for Dynamic allocation
+         TODO: Use for other architectures
+

 config SPL_SYS_MALLOC_F_LEN
 config SPL_SYS_MALLOC_F_LEN

-        hex "Size of malloc() pool in SPL before relocation"
-        depends on SYS_MALLOC_F
-        default SYS_MALLOC_F_LEN
-        help
-          Before relocation, memory is very limited on many platforms. Still,
-          we can provide a small malloc() pool if needed. Driver model in
-          particular needs this to operate, so that it can allocate the
-          initial serial device and any others that are needed.
+       hex "Size of malloc() pool in SPL before relocation"
+       depends on SYS_MALLOC_F
+       default SYS_MALLOC_F_LEN
+       help
+         Before relocation, memory is very limited on many platforms. Still,
+         we can provide a small malloc() pool if needed. Driver model in
+         particular needs this to operate, so that it can allocate the
+         initial serial device and any others that are needed.

 
 config TPL_SYS_MALLOC_F_LEN
 
 config TPL_SYS_MALLOC_F_LEN

-        hex "Size of malloc() pool in TPL before relocation"
-        depends on SYS_MALLOC_F
-        default SYS_MALLOC_F_LEN
-        help
-          Before relocation, memory is very limited on many platforms. Still,
-          we can provide a small malloc() pool if needed. Driver model in
-          particular needs this to operate, so that it can allocate the
-          initial serial device and any others that are needed.
+       hex "Size of malloc() pool in TPL before relocation"
+       depends on SYS_MALLOC_F
+       default SYS_MALLOC_F_LEN
+       help
+         Before relocation, memory is very limited on many platforms. Still,
+         we can provide a small malloc() pool if needed. Driver model in
+         particular needs this to operate, so that it can allocate the
+         initial serial device and any others that are needed.

 
 menuconfig EXPERT
        bool "Configure standard U-Boot features (expert users)"
 
 menuconfig EXPERT
        bool "Configure standard U-Boot features (expert users)"


@@ -197,7 +213,7 @@ config PHYS_64BIT
        help
          Say Y here to support 64bit physical memory address.
          This can be used not only for 64bit SoCs, but also for
        help
          Say Y here to support 64bit physical memory address.
          This can be used not only for 64bit SoCs, but also for

-         large physical address extention on 32bit SoCs.
+         large physical address extension on 32bit SoCs.

 
 config BUILD_ROM
        bool "Build U-Boot as BIOS replacement"
 
 config BUILD_ROM
        bool "Build U-Boot as BIOS replacement"


@@ -235,10 +251,20 @@ config FIT
 
 if FIT
 
 
 if FIT
 

+config FIT_EXTERNAL_OFFSET
+       hex "Text Base"
+       default 0x0
+       help
+         This specifies a data offset in fit image.
+         The offset is from data payload offset to the beginning of
+         fit image header. When specifies a offset, specific data
+         could be put in the hole between data payload and fit image
+         header, such as CSF data on i.MX platform.
+

 config FIT_ENABLE_SHA256_SUPPORT
        bool "Support SHA256 checksum of FIT image contents"
 config FIT_ENABLE_SHA256_SUPPORT
        bool "Support SHA256 checksum of FIT image contents"

-       select SHA256

        default y
        default y

+       select SHA256

        help
          Enable this to support SHA256 checksum of FIT image contents. A
          SHA256 checksum is a 256-bit (32-byte) hash value used to check that
        help
          Enable this to support SHA256 checksum of FIT image contents. A
          SHA256 checksum is a 256-bit (32-byte) hash value used to check that


@@ -252,8 +278,8 @@ config FIT_ENABLE_SHA256_SUPPORT
 config FIT_SIGNATURE
        bool "Enable signature verification of FIT uImages"
        depends on DM
 config FIT_SIGNATURE
        bool "Enable signature verification of FIT uImages"
        depends on DM

-       select RSA

        select HASH
        select HASH

+       select RSA

        help
          This option enables signature verification of FIT uImages,
          using a hash signed and verified using RSA. If
        help
          This option enables signature verification of FIT uImages,
          using a hash signed and verified using RSA. If


@@ -277,6 +303,14 @@ config FIT_SIGNATURE_MAX_SIZE
          device memory. Assure this size does not extend past expected storage
          space.
 
          device memory. Assure this size does not extend past expected storage
          space.
 

+config FIT_ENABLE_RSASSA_PSS_SUPPORT
+       bool "Support rsassa-pss signature scheme of FIT image contents"
+       depends on FIT_SIGNATURE
+       default n
+       help
+         Enable this to support the pss padding algorithm as described
+         in the rfc8017 (https://tools.ietf.org/html/rfc8017).
+

 config FIT_VERBOSE
        bool "Show verbose messages when FIT images fail"
        help
 config FIT_VERBOSE
        bool "Show verbose messages when FIT images fail"
        help


@@ -440,7 +474,7 @@ config SYS_EXTRA_OPTIONS
 config SYS_TEXT_BASE
        depends on !NIOS2 && !XTENSA
        depends on !EFI_APP
 config SYS_TEXT_BASE
        depends on !NIOS2 && !XTENSA
        depends on !EFI_APP

-       default 0x80800000 if ARCH_OMAP2PLUS
+       default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3

        default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
        default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
        default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
        default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
        default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
        default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S