[PATCH] export toshiba SMM support for neofb module

[platform/kernel/linux-starfive.git] / Documentation / IPMI.txt

diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 9f08d73..0e3924e 100644 (file)
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -468,12 +468,12 @@ BMCs specified on the smb_addr line will be detected.
 Setting smb_dbg_probe to 1 will enable debugging of the probing and
 detection process for BMCs on the SMBusses.
 
 Setting smb_dbg_probe to 1 will enable debugging of the probing and
 detection process for BMCs on the SMBusses.
 

-Discovering the IPMI compilant BMC on the SMBus can cause devices
+Discovering the IPMI compliant BMC on the SMBus can cause devices

 on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI
 message as a block write to the I2C bus and waits for a response.
 This action can be detrimental to some I2C devices. It is highly recommended
 that the known I2c address be given to the SMBus driver in the smb_addr
 on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI
 message as a block write to the I2C bus and waits for a response.
 This action can be detrimental to some I2C devices. It is highly recommended
 that the known I2c address be given to the SMBus driver in the smb_addr

-parameter. The default adrress range will not be used when a smb_addr
+parameter. The default address range will not be used when a smb_addr

 parameter is provided.
 
 When compiled into the kernel, the addresses can be specified on the
 parameter is provided.
 
 When compiled into the kernel, the addresses can be specified on the