The Automake test suite User interface ============== Running the tests ----------------- To run all tests: make -k check By default, verbose output of a test 't/foo.sh' or 't/foo.tap' is retained in the log file 't/foo.log'. Also, a summary log is created in the file 'test-suite.log' (in the top-level directory). You can use '-jN' for faster completion (it even helps on a uniprocessor system, due to unavoidable sleep delays, as noted below): make -k -j4 To rerun only failed tests: make -k recheck To run only tests that are newer than their last results: make -k check RECHECK_LOGS= To run only selected tests: make -k check TESTS="t/foo.sh t/bar.tap" (GNU make) env TESTS="t/foo.sh t/bar.tap" make -e -k check (non-GNU make) To run the tests in cross-compilation mode, you should first configure the automake source tree to a cross-compilation setup. For example, to run with a Linux-to-MinGW cross compiler, you will need something like this: ./configure --host i586-mingw32msvc --build i686-pc-linux-gnu To avoid possible spurious error, you really have to *explicitly* specify '--build' in addition to '--host'; the 'lib/config.guess' script can help determine the correct value to pass to '--build'. Then you can just run the testsuite in the usual way, and the test cases using a compiler should automatically use a cross-compilation setup. Interpretation -------------- Successes: PASS - success XFAIL - expected failure Failures: FAIL - failure XPASS - unexpected success Other: SKIP - skipped tests (third party tools not available) ERROR - some unexpected error condition About the tests --------------- There are two kinds of tests in the Automake testsuite (both implemented as shell scripts). The scripts with the '.sh' suffix are "simple" tests, their outcome completely determined by their exit status. Those with the '.tap' suffix use the TAP protocol. If you want to run a test by hand, you can do so directly if it is a simple test: ./t/nogzip.sh (it will be verbose by default), while if it is a TAP test you can pass it to your preferred TAP runner, as in e.g.: prove --verbose --merge ./t/add-missing.tap The tests can also be run directly in a VPATH build, as with: /path/to/srcdir/t/nogzip.sh prove --verbose --merge /path/to/srcdir/t/add-missing.tap Supported shells ---------------- By default, the tests are run by the $SHELL detected at configure time. They also take care to re-execute themselves with that shell, unless told not to. So, to run the tests with a different shell, say '/path/to/another/sh', the user must use: AM_TESTS_REEXEC=no /path/to/another/sh ./t/foo.sh AM_TESTS_REEXEC=no prove -v -e /path/to/another/sh ./t/bar.tap to run a test directly, and: make check LOG_COMPILER=/path/to/sh (GNU make) LOG_COMPILER=/path/to/sh make -e check (non-GNU make) to run the test(s) through the makefile test driver. The test scripts are written with portability in mind, so that they should run with any decent Bourne-compatible shell. However, some care must be used with Zsh, since, when not directly started in Bourne-compatibility mode, it has some incompatibilities in the handling of $0 which conflict with our usage. Our testsuite can automatically work around these incompatibilities when a version 4.3 or later of Zsh is used, but unfortunately not when an older version of Zsh is used. Thus, if you want to run a test script, say 'foo.sh', with Zsh 4.2, you *can't* simply do "zsh foo.sh", but you *must* resort to: AM_TESTS_REEXEC=no zsh -o no_function_argzero foo.sh Note that this problem does not occur if Zsh is executed through a symlink with a basename of 'sh', since in that case Zsh starts in Bourne compatibility mode. So you should be perfectly safe when /bin/sh is Zsh, even a it's version < 4.3. Reporting failures ------------------ Send verbose output, i.e., the contents of test-suite.log, of failing tests to , along with the usual version numbers (which Automake, which Autoconf, which operating system, which make version, which shell, etc.) Writing test cases ================== Do -- If you plan to fix a bug, write the test case first. This way you'll make sure the test catches the bug, and that it succeeds once you have fixed the bug. Add a copyright/license paragraph. Explain what the test does. Cite the PR number (if any), and the original reporter (if any), so we can find or ask for information if needed. If a test checks examples or idioms given in the documentation, make sure the documentation reference them appropriately in comments, as in: @c Keep in sync with autodist-config-headers.sh @example ... @end example Use "required=..." for required tools. Do not explicitly require tools which can be taken for granted because they're listed in the GNU Coding Standards (for example, 'gzip'). Include ./defs in every test script (see existing tests for examples of how to do this). Use the 'skip_' function to skip tests, with a meaningful message if possible. Where convenient, use the 'warn_' function to print generic warnings, the 'fail_' function for test failures, and the 'fatal_' function for hard errors. In case a hard error is due to a failed set-up of a test scenario, you can use the 'framework_fail_' function instead. For those tests checking the Automake-provided test harnesses that are expected to work also when the 'serial-tests' Automake option is used (thus causing the serial testsuite harness to be used in the generated Makefile), place a line containing "try-with-serial-tests" somewhere in the file. That will ensure that the 'gen-testsuite-part' script generates a sibling of that test which uses the serial harness instead of the parallel one. For those tests that are *not* meant to work with the parallel testsuite harness at all (these should be very very few), set the shell variable 'am_serial_tests' to "yes" before including ./defs. Some tests in the Automake testsuite are auto-generated; those tests might have custom extensions, but their basename (that is, with such extension stripped) is expected to end with "-w" string, optionally followed by decimal digits. For example, the name of a valid auto-generated test can be 'color-w.sh' or 'tap-signal-w09.tap'. Please don't name hand-written tests in a way that could cause them to be confused with auto-generated tests; for example, 'u-v-w.sh' or 'option-w0.tap' are *not* valid name for hand-written tests. ./defs brings in some commonly required files, and sets a skeleton configure.ac. If possible, append to this file. In some cases you'll have to overwrite it, but this should be the exception. Note that configure.ac registers Makefile.in but do not output anything by default. If you need ./configure to create Makefile, append AC_OUTPUT to configure.ac. In case you don't want ./defs to pre-populate your test directory (which is a rare occurrence), set the 'am_create_testdir' shell variable to "empty" before sourcing ./defs. By default, the testcases are run with the errexit shell flag on, to make it easier to catch failures you might not have thought of. If this is undesirable in some testcase, you can use "set +e" to disable the errexit flag (but please do so only if you have a very good reason). End the test script with a ":" or "Exit 0". Otherwise, when somebody changes the test by adding a failing command after the last command, the test will spuriously fail because $? is nonzero at the end. Note that this is relevant even if the errexit shell flag is on, in case the test contains commands like "grep ... Makefile.in && Exit 1" (and there are indeed a lot of such tests). Use $ACLOCAL, $AUTOMAKE, $AUTOCONF, $AUTOUPDATE, $AUTOHEADER, $PERL, $MAKE, $EGREP, and $FGREP, instead of the corresponding commands. Use $sleep when you have to make sure that some file is newer than another. Use cat or grep or similar commands to display (part of) files that may be interesting for debugging, so that when a user send a verbose output we don't have to ask him for more details. Display stderr output on the stderr file descriptor. If some redirected command is likely to fail, display its output even in the failure case, before exiting. Use 'Exit' rather than 'exit' to abort for leave early from a test case. Use '$PATH_SEPARATOR', not hard-coded ':', as the separator of PATH's entries. It's more important to make sure that a feature works, than make sure that Automake's output looks correct. It might look correct and still fail to work. In other words, prefer running 'make' over grepping Makefile.in (or do both). If you run $ACLOCAL, $AUTOMAKE or $AUTOCONF several times in the same test and change configure.ac by the meantime, do rm -rf autom4te*.cache before the following runs. On fast machines the new configure.ac could otherwise have the same timestamp as the old autom4te.cache. Use filenames with two consecutive spaces when testing that some code preserves filenames with spaces. This will catch errors like `echo $filename | ...`. Make sure your test script can be used to faithfully check an installed version of automake (as with "make installcheck"). For example, if you need to copy or grep an automake-provided script, do not assume that they can be found in the '$top_srcdir/lib' directory, but use '$am_scriptdir' instead. The complete list of such "$am_...dir" variables can be found in the 'defs-static.in' file. When writing input for lex, include the following in the definitions section: %{ #define YY_NO_UNISTD_H 1 %} to accommodate non-ANSI systems, since GNU flex generates code that includes unistd.h otherwise. Also add: int isatty (int fd) { return 0; } to the definitions section if the generated code is to be compiled by a C++ compiler, for similar reasons (i.e., the isatty(3) function from that same unistd.h header would be required otherwise). Before commit: make sure the test is executable, add the tests to TESTS in Makefile.am, add it to XFAIL_TESTS in addition if needed, write a ChangeLog entry, send the diff to . Do not ------ Do not test an Automake error with "$AUTOMAKE && Exit 1", or in three years we'll discover that this test failed for some other bogus reason. This happened many times. Better use something like AUTOMAKE_fails grep 'expected diagnostic' stderr (Note this doesn't prevent the test from failing for another reason, but at least it makes sure the original error is still here). Do not override Makefile variables using make arguments, as in e.g.: $MAKE prefix=/opt install This is not portable for recursive targets (targets that call a sub-make may not pass "prefix=/opt" along). Use the following instead: prefix=/opt $MAKE -e install