*PPD-Adobe: "4.3"
*%
*% This PPD file is for using the HP Color LaserJet CM3530 MFP in native
*% PDF mode, using CUPS with the OpenPrinting CUPS Filters package
*%
*% This PPD is experimental. It is possible that some of the options
*% and settings do not make sense or do not cause any change on the output.
*% It can even happen that with certain settings nothing or an error page
*% comes out.
*%
*% This file is published under the GNU General Public License
*%
*% You may save this file as 'HP-Color_LaserJet_CM3530_MFP-PDF.ppd'
*%
*%
*FormatVersion:	"4.3"
*FileVersion:	"1.1"
*LanguageVersion: English 
*LanguageEncoding: ISOLatin1
*PCFileName:	"CM353PDF.PPD"
*Manufacturer:	"HP"
*Product:       "(HP Color LaserJet CM3530 MFP)"
*Product:       "(Hewlett-Packard HP Color LaserJet CM3530 MFP)"
*cupsVersion:	1.0
*cupsManualCopies: True
*cupsModelNumber:  2
*ModelName:     "HP Color LaserJet CM3530 MFP"
*ShortNickName: "HP Color LaserJet CM3530 MFP"
*NickName:      "HP Color LaserJet CM3530 MFP PDF"
*PSVersion:     "(3010.107) 0"
*LanguageLevel:	"3"
*ColorDevice:	True
*DefaultColorSpace: CMYK
*FileSystem:	False
*Throughput:	"30"
*LandscapeOrientation: Plus90
*TTRasterizer:	Type42
*1284DeviceID: "MFG:Hewlett-Packard;CMD:PJL,BIDI-ECP,PCLXL,PCL,PDF,PJL,POSTSCRIPT;MDL:HP Color LaserJet CM3530 MFP;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CM3530 MFP;DRV:DPDF,R0,M0;"
*JCLBegin:            "<1B>%-12345X@PJL JOB<0A>"
*JCLToPDFInterpreter: "@PJL ENTER LANGUAGE = PDF <0A>"
*JCLEnd:              "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"
*cupsFilter: "application/vnd.cups-pdf 0 -"

*OpenGroup: General/General
*JCLOpenUI *PageSize/Page Size: PickOne
*OrderDependency: 100 JCLSetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "@PJL SET PAPER=LETTER<0A>"
*PageSize A4/A4: "@PJL SET PAPER=A4<0A>"
*PageSize A5/A5: "@PJL SET PAPER=A5<0A>"
*PageSize A6/A6: "@PJL SET PAPER=A6<0A>"
*PageSize ISOB5/ISO B5: "@PJL SET PAPER=B5<0A>"
*PageSize EnvC5/C5: "@PJL SET PAPER=C5<0A>"
*PageSize Env10/Com 10: "@PJL SET PAPER=COM10<0A>"
*PageSize EnvDL/DL: "@PJL SET PAPER=DL<0A>"
*PageSize 5x13/Eight Point 5x13: "@PJL SET PAPER=EIGHTPOINT5X13<0A>"
*PageSize EnvC6/Envelope C6: "@PJL SET PAPER=ENVELOPEC6<0A>"
*PageSize Executive/Executive: "@PJL SET PAPER=EXECUTIVE<0A>"
*PageSize B5/JIS B5: "@PJL SET PAPER=JISB5<0A>"
*PageSize B6/JIS B6: "@PJL SET PAPER=JISB6<0A>"
*PageSize Legal/Legal: "@PJL SET PAPER=LEGAL<0A>"
*PageSize EnvMonarch/Monarch: "@PJL SET PAPER=MONARCH<0A>"
*PageSize 69x95mm/16K: "@PJL SET PAPER=SIZE16K195x270<0A>"
*PageSize Statement/Statement: "@PJL SET PAPER=STATEMENT<0A>"
*JCLCloseUI: *PageSize

*JCLOpenUI *PageRegion: PickOne
*OrderDependency: 100 JCLSetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "@PJL SET PAPER=LETTER<0A>"
*PageRegion A4/A4: "@PJL SET PAPER=A4<0A>"
*PageRegion A5/A5: "@PJL SET PAPER=A5<0A>"
*PageRegion A6/A6: "@PJL SET PAPER=A6<0A>"
*PageRegion ISOB5/ISO B5: "@PJL SET PAPER=B5<0A>"
*PageRegion EnvC5/C5: "@PJL SET PAPER=C5<0A>"
*PageRegion Env10/Com 10: "@PJL SET PAPER=COM10<0A>"
*PageRegion EnvDL/DL: "@PJL SET PAPER=DL<0A>"
*PageRegion 5x13/Eight Point 5x13: "@PJL SET PAPER=EIGHTPOINT5X13<0A>"
*PageRegion EnvC6/Envelope C6: "@PJL SET PAPER=ENVELOPEC6<0A>"
*PageRegion Executive/Executive: "@PJL SET PAPER=EXECUTIVE<0A>"
*PageRegion B5/JIS B5: "@PJL SET PAPER=JISB5<0A>"
*PageRegion B6/JIS B6: "@PJL SET PAPER=JISB6<0A>"
*PageRegion Legal/Legal: "@PJL SET PAPER=LEGAL<0A>"
*PageRegion EnvMonarch/Monarch: "@PJL SET PAPER=MONARCH<0A>"
*PageRegion 69x95mm/16K: "@PJL SET PAPER=SIZE16K195x270<0A>"
*PageRegion Statement/Statement: "@PJL SET PAPER=STATEMENT<0A>"
*JCLCloseUI: *PageRegion

*DefaultImageableArea: Letter
*ImageableArea Letter/Letter: "18 36 594 756"
*ImageableArea A4/A4: "18 36 577 806"
*ImageableArea A5/A5: "18 36 402 559"
*ImageableArea A6/A6: "18 36 279 384"
*ImageableArea ISOB5/ISO B5: "18 36 480 672"
*ImageableArea EnvC5/C5: "18 36 441 613"
*ImageableArea Env10/Com 10: "18 36 279 648"
*ImageableArea EnvDL/DL: "18 36 293 587"
*ImageableArea 5x13/Eight Point 5x13: "18 36 342 900"
*ImageableArea EnvC6/Envelope C6: "18 36 305 423"
*ImageableArea Executive/Executive: "18 36 504 720"
*ImageableArea B5/JIS B5: "18 36 500 691"
*ImageableArea B6/JIS B6: "18 36 344 482"
*ImageableArea Legal/Legal: "18 36 594 972"
*ImageableArea EnvMonarch/Monarch: "18 36 261 504"
*ImageableArea 69x95mm/16K: "18 36 177 234"
*ImageableArea Statement/Statement: "18 36 378 576"

*DefaultPaperDimension: Letter
*PaperDimension Letter/Letter: "612 792"
*PaperDimension A4/A4: "595 842"
*PaperDimension A5/A5: "420 595"
*PaperDimension A6/A6: "297 420"
*PaperDimension ISOB5/ISO B5: "498 708"
*PaperDimension EnvC5/C5: "459 649"
*PaperDimension Env10/Com 10: "297 684"
*PaperDimension EnvDL/DL: "311 623"
*PaperDimension 5x13/Eight Point 5x13: "360 936"
*PaperDimension EnvC6/Envelope C6: "323 459"
*PaperDimension Executive/Executive: "522 756"
*PaperDimension B5/JIS B5: "518 727"
*PaperDimension B6/JIS B6: "362 518"
*PaperDimension Legal/Legal: "612 1008"
*PaperDimension EnvMonarch/Monarch: "279 540"
*PaperDimension 69x95mm/16K: "195 270"
*PaperDimension Statement/Statement: "396 612"

*JCLOpenUI *manualfeed/Manual Feed of Paper: PickOne
*OrderDependency: 100 JCLSetup *manualfeed
*Defaultmanualfeed: off
*manualfeed off/Off: "@PJL SET MANUALFEED=OFF<0A>"
*manualfeed on/On: "@PJL SET MANUALFEED=ON<0A>"
*JCLCloseUI: *manualfeed

*JCLOpenUI *manualduplex/Manual duplex: PickOne
*OrderDependency: 100 JCLSetup *manualduplex
*Defaultmanualduplex: off
*manualduplex off/Off: "@PJL SET MANUALDUPLEX=OFF<0A>"
*manualduplex on/On: "@PJL SET MANUALDUPLEX=ON<0A>"
*JCLCloseUI: *manualduplex

*JCLOpenUI *Duplex/Double-Sided Printing: PickOne
*OrderDependency: 100 JCLSetup *Duplex
*DefaultDuplex: None
*Duplex None/Off: "@PJL SET DUPLEX=OFF<0A>"
*Duplex DuplexNoTumble/Long-Edge binding: "@PJL SET DUPLEX=ON<0A>@PJL SET BINDING=LONGEDGE<0A>"
*Duplex DuplexTumble/Short-Edge binding: "@PJL SET DUPLEX=ON<0A>@PJL SET BINDING=SHORTEDGE<0A>"
*JCLCloseUI: *Duplex

*JCLOpenUI *Resolution/Resolution: PickOne
*OrderDependency: 100 JCLSetup *Resolution
*DefaultResolution: 600dpi
*Resolution 300dpi/300 dpi: "@PJL SET RESOLUTION=300<0A>"
*Resolution 600dpi/600 dpi: "@PJL SET RESOLUTION=600<0A>"
*Resolution 1200dpi/1200 dpi: "@PJL SET RESOLUTION=1200<0A>"
*JCLCloseUI: *Resolution


*JCLOpenUI *colorbalanceblack/Color balance black: PickOne
*OrderDependency: 100 JCLSetup *colorbalanceblack
*Defaultcolorbalanceblack: 4
*colorbalanceblack 0/0: "@PJL SET COLORBALANCEBLACK=0<0A>"
*colorbalanceblack 1/1: "@PJL SET COLORBALANCEBLACK=1<0A>"
*colorbalanceblack 2/2: "@PJL SET COLORBALANCEBLACK=2<0A>"
*colorbalanceblack 3/3: "@PJL SET COLORBALANCEBLACK=3<0A>"
*colorbalanceblack 4/4: "@PJL SET COLORBALANCEBLACK=4<0A>"
*colorbalanceblack 5/5: "@PJL SET COLORBALANCEBLACK=5<0A>"
*colorbalanceblack 6/6: "@PJL SET COLORBALANCEBLACK=6<0A>"
*colorbalanceblack 7/7: "@PJL SET COLORBALANCEBLACK=7<0A>"
*colorbalanceblack 8/8: "@PJL SET COLORBALANCEBLACK=8<0A>"
*JCLCloseUI: *colorbalanceblack

*CustomJCLcolorbalanceblack True: "@PJL SET COLORBALANCEBLACK=\1<0A>"
*ParamCustomJCLcolorbalanceblack colorbalanceblack/colorbalanceblack: 1 int 0 8

*JCLOpenUI *colorbalancecyan/Color balance cyan: PickOne
*OrderDependency: 100 JCLSetup *colorbalancecyan
*Defaultcolorbalancecyan: 4
*colorbalancecyan 0/0: "@PJL SET COLORBALANCECYAN=0<0A>"
*colorbalancecyan 1/1: "@PJL SET COLORBALANCECYAN=1<0A>"
*colorbalancecyan 2/2: "@PJL SET COLORBALANCECYAN=2<0A>"
*colorbalancecyan 3/3: "@PJL SET COLORBALANCECYAN=3<0A>"
*colorbalancecyan 4/4: "@PJL SET COLORBALANCECYAN=4<0A>"
*colorbalancecyan 5/5: "@PJL SET COLORBALANCECYAN=5<0A>"
*colorbalancecyan 6/6: "@PJL SET COLORBALANCECYAN=6<0A>"
*colorbalancecyan 7/7: "@PJL SET COLORBALANCECYAN=7<0A>"
*colorbalancecyan 8/8: "@PJL SET COLORBALANCECYAN=8<0A>"
*JCLCloseUI: *colorbalancecyan

*CustomJCLcolorbalancecyan True: "@PJL SET COLORBALANCECYAN=\1<0A>"
*ParamCustomJCLcolorbalancecyan colorbalancecyan/colorbalancecyan: 1 int 0 8

*JCLOpenUI *colorbalancemagenta/Color balance magenta: PickOne
*OrderDependency: 100 JCLSetup *colorbalancemagenta
*Defaultcolorbalancemagenta: 4
*colorbalancemagenta 0/0: "@PJL SET COLORBALANCEMAGENTA=0<0A>"
*colorbalancemagenta 1/1: "@PJL SET COLORBALANCEMAGENTA=1<0A>"
*colorbalancemagenta 2/2: "@PJL SET COLORBALANCEMAGENTA=2<0A>"
*colorbalancemagenta 3/3: "@PJL SET COLORBALANCEMAGENTA=3<0A>"
*colorbalancemagenta 4/4: "@PJL SET COLORBALANCEMAGENTA=4<0A>"
*colorbalancemagenta 5/5: "@PJL SET COLORBALANCEMAGENTA=5<0A>"
*colorbalancemagenta 6/6: "@PJL SET COLORBALANCEMAGENTA=6<0A>"
*colorbalancemagenta 7/7: "@PJL SET COLORBALANCEMAGENTA=7<0A>"
*colorbalancemagenta 8/8: "@PJL SET COLORBALANCEMAGENTA=8<0A>"
*JCLCloseUI: *colorbalancemagenta

*CustomJCLcolorbalancemagenta True: "@PJL SET COLORBALANCEMAGENTA=\1<0A>"
*ParamCustomJCLcolorbalancemagenta colorbalancemagenta/colorbalancemagenta: 1 int 0 8

*JCLOpenUI *colorbalanceyellow/Color balance yellow: PickOne
*OrderDependency: 100 JCLSetup *colorbalanceyellow
*Defaultcolorbalanceyellow: 4
*colorbalanceyellow 0/0: "@PJL SET COLORBALANCEYELLOW=0<0A>"
*colorbalanceyellow 1/1: "@PJL SET COLORBALANCEYELLOW=1<0A>"
*colorbalanceyellow 2/2: "@PJL SET COLORBALANCEYELLOW=2<0A>"
*colorbalanceyellow 3/3: "@PJL SET COLORBALANCEYELLOW=3<0A>"
*colorbalanceyellow 4/4: "@PJL SET COLORBALANCEYELLOW=4<0A>"
*colorbalanceyellow 5/5: "@PJL SET COLORBALANCEYELLOW=5<0A>"
*colorbalanceyellow 6/6: "@PJL SET COLORBALANCEYELLOW=6<0A>"
*colorbalanceyellow 7/7: "@PJL SET COLORBALANCEYELLOW=7<0A>"
*colorbalanceyellow 8/8: "@PJL SET COLORBALANCEYELLOW=8<0A>"
*JCLCloseUI: *colorbalanceyellow

*CustomJCLcolorbalanceyellow True: "@PJL SET COLORBALANCEYELLOW=\1<0A>"
*ParamCustomJCLcolorbalanceyellow colorbalanceyellow/colorbalanceyellow: 1 int 0 8


*JCLOpenUI *colorsupplyout/On color supply out: PickOne
*OrderDependency: 100 JCLSetup *colorsupplyout
*Defaultcolorsupplyout: autocontinueblack
*colorsupplyout autocontinueblack/Continue in grayscale: "@PJL SET COLORSUPPLYOUT=AUTOCONTINUEBLACK<0A>"
*colorsupplyout stop/Stop: "@PJL SET COLORSUPPLYOUT=STOP<0A>"
*JCLCloseUI: *colorsupplyout

*JCLOpenUI *ret/Resolution Enhancement: PickOne
*OrderDependency: 100 JCLSetup *ret
*Defaultret: notset
*ret dark/Dark: "@PJL SET RET=DARK<0A>"
*ret light/Light: "@PJL SET RET=LIGHT<0A>"
*ret medium/Medium: "@PJL SET RET=MEDIUM<0A>"
*ret notset/notset: "@PJL SET RET=NOTSET<0A>"
*ret off/Off: "@PJL SET RET=OFF<0A>"
*JCLCloseUI: *ret

*JCLOpenUI *borderless/Borderless Printing: PickOne
*OrderDependency: 100 JCLSetup *borderless
*Defaultborderless: on
*borderless off/Off: "@PJL SET BORDERLESS=OFF<0A>"
*borderless on/On: "@PJL SET BORDERLESS=ON<0A>"
*JCLCloseUI: *borderless

*JCLOpenUI *contentorientation/Content Orientation: PickOne
*OrderDependency: 100 JCLSetup *contentorientation
*Defaultcontentorientation: notspecified
*contentorientation landscape/Landscape: "@PJL SET CONTENTORIENTATION=LANDSCAPE<0A>"
*contentorientation notspecified/Not specified: "@PJL SET CONTENTORIENTATION=NOTSPECIFIED<0A>"
*contentorientation portrait/Portrait: "@PJL SET CONTENTORIENTATION=PORTRAIT<0A>"
*contentorientation reverselandscape/Reverse landscape: "@PJL SET CONTENTORIENTATION=REVERSELANDSCAPE<0A>"
*contentorientation reverseportrait/Reverse portrait: "@PJL SET CONTENTORIENTATION=REVERSEPORTRAIT<0A>"
*JCLCloseUI: *contentorientation

*JCLOpenUI *edgecontrol/Edge control: PickOne
*OrderDependency: 100 JCLSetup *edgecontrol
*Defaultedgecontrol: maximum
*edgecontrol normal/Normal: "@PJL SET EDGECONTROL=NORMAL<0A>"
*edgecontrol light/Light: "@PJL SET EDGECONTROL=LIGHT<0A>"
*edgecontrol maximum/Maximum: "@PJL SET EDGECONTROL=MAXIMUM<0A>"
*edgecontrol off/Off: "@PJL SET EDGECONTROL=OFF<0A>"
*JCLCloseUI: *edgecontrol

*JCLOpenUI *edgetoedge/Edge to edge: PickOne
*OrderDependency: 100 JCLSetup *edgetoedge
*Defaultedgetoedge: yes
*edgetoedge no/No: "@PJL SET EDGETOEDGE=NO<0A>"
*edgetoedge yes/Yes: "@PJL SET EDGETOEDGE=YES<0A>"
*JCLCloseUI: *edgetoedge

*JCLOpenUI *finish/Finisher: PickOne
*OrderDependency: 100 JCLSetup *finish
*Defaultfinish: none
*finish none/None: "@PJL SET FINISH=NONE<0A>"
*finish on/On: "@PJL SET FINISH=ON<0A>"
*finish staple/Staple: "@PJL SET FINISH=STAPLE<0A>"
*JCLCloseUI: *finish

*JCLOpenUI *hold/Hold Job: PickOne
*OrderDependency: 100 JCLSetup *hold
*Defaulthold: off
*hold off/Off: "@PJL SET HOLD=OFF<0A>"
*hold on/On: "@PJL SET HOLD=ON<0A>"
*hold proof/Proof: "@PJL SET HOLD=PROOF<0A>"
*hold store/Store: "@PJL SET HOLD=STORE<0A>"
*JCLCloseUI: *hold

*JCLOpenUI *joboffset/Job Offset: PickOne
*OrderDependency: 100 JCLSetup *joboffset
*Defaultjoboffset: on
*joboffset off/Off: "@PJL SET JOBOFFSET=OFF<0A>"
*joboffset on/On: "@PJL SET JOBOFFSET=ON<0A>"
*JCLCloseUI: *joboffset

*JCLOpenUI *lowsupplies/On low supplies: PickOne
*OrderDependency: 100 JCLSetup *lowsupplies
*Defaultlowsupplies: continue
*lowsupplies continue/Continue: "@PJL SET LOWSUPPLIES=CONTINUE<0A>"
*lowsupplies stop/Stop: "@PJL SET LOWSUPPLIES=STOP<0A>"
*JCLCloseUI: *lowsupplies

*JCLOpenUI *overridea4withletter/Override A4 with Letter: PickOne
*OrderDependency: 100 JCLSetup *overridea4withletter
*Defaultoverridea4withletter: yes
*overridea4withletter no/No: "@PJL SET OVERRIDEA4WITHLETTER=NO<0A>"
*overridea4withletter yes/Yes: "@PJL SET OVERRIDEA4WITHLETTER=YES<0A>"
*JCLCloseUI: *overridea4withletter

*JCLOpenUI *planesinuse/Planes in use: PickOne
*OrderDependency: 100 JCLSetup *planesinuse
*Defaultplanesinuse: 3
*planesinuse 1/1: "@PJL SET PLANESINUSE=1<0A>"
*planesinuse 3/3: "@PJL SET PLANESINUSE=3<0A>"
*JCLCloseUI: *planesinuse

*JCLOpenUI *printonbackside/Print on back side: PickOne
*OrderDependency: 100 JCLSetup *printonbackside
*Defaultprintonbackside: on
*printonbackside off/Off: "@PJL SET PRINTONBACKSIDE=OFF<0A>"
*printonbackside on/On: "@PJL SET PRINTONBACKSIDE=ON<0A>"
*JCLCloseUI: *printonbackside

*JCLOpenUI *processingaction/Processing Action: PickOne
*OrderDependency: 100 JCLSetup *processingaction
*Defaultprocessingaction: replace
*processingaction append/Append: "@PJL SET PROCESSINGACTION=APPEND<0A>"
*processingaction replace/Replace: "@PJL SET PROCESSINGACTION=REPLACE<0A>"
*JCLCloseUI: *processingaction

*JCLOpenUI *processingboundary/Processing Boundary: PickOne
*OrderDependency: 100 JCLSetup *processingboundary
*Defaultprocessingboundary: job
*processingboundary job/Job: "@PJL SET PROCESSINGBOUNDARY=JOB<0A>"
*processingboundary mopy/Mopy: "@PJL SET PROCESSINGBOUNDARY=MOPY<0A>"
*JCLCloseUI: *processingboundary

*JCLOpenUI *reprint/Reprint job: PickOne
*OrderDependency: 100 JCLSetup *reprint
*Defaultreprint: auto
*reprint auto/Automatic: "@PJL SET REPRINT=AUTO<0A>"
*reprint off/Off: "@PJL SET REPRINT=OFF<0A>"
*reprint on/On: "@PJL SET REPRINT=ON<0A>"
*JCLCloseUI: *reprint

*JCLOpenUI *stapleoption/Stapling Mode: PickOne
*OrderDependency: 100 JCLSetup *stapleoption
*Defaultstapleoption: none
*stapleoption default/Default: "@PJL SET STAPLEOPTION=DEFAULT<0A>"
*stapleoption custom/Custom Size: "@PJL SET STAPLEOPTION=CUSTOM<0A>"
*stapleoption five/5: "@PJL SET STAPLEOPTION=FIVE<0A>"
*stapleoption four/4: "@PJL SET STAPLEOPTION=FOUR<0A>"
*stapleoption none/None: "@PJL SET STAPLEOPTION=NONE<0A>"
*stapleoption one/1: "@PJL SET STAPLEOPTION=ONE<0A>"
*stapleoption oneangled/One Angled: "@PJL SET STAPLEOPTION=ONEANGLED<0A>"
*stapleoption oneopposed/One Opposed: "@PJL SET STAPLEOPTION=ONEOPPOSED<0A>"
*stapleoption option3/Option 3: "@PJL SET STAPLEOPTION=OPTION3<0A>"
*stapleoption option4/Option 4: "@PJL SET STAPLEOPTION=OPTION4<0A>"
*stapleoption option5/Option 5: "@PJL SET STAPLEOPTION=OPTION5<0A>"
*stapleoption option6/Option 6: "@PJL SET STAPLEOPTION=OPTION6<0A>"
*stapleoption seven/7: "@PJL SET STAPLEOPTION=SEVEN<0A>"
*stapleoption six/6: "@PJL SET STAPLEOPTION=SIX<0A>"
*stapleoption three/3: "@PJL SET STAPLEOPTION=THREE<0A>"
*stapleoption two/2: "@PJL SET STAPLEOPTION=TWO<0A>"
*JCLCloseUI: *stapleoption

*CloseGroup: General


*% Generic boilerplate PPD stuff as standard PostScript fonts and so on

*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
*Font Bookman-Demi: Standard "(001.004S)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
*Font Bookman-Light: Standard "(001.004S)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
*Font Courier: Standard "(002.004S)" Standard ROM
*Font Courier-Bold: Standard "(002.004S)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
*Font Courier-Oblique: Standard "(002.004S)" Standard ROM
*Font Helvetica: Standard "(001.006S)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
*Font Palatino-Bold: Standard "(001.005S)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
*Font Palatino-Italic: Standard "(001.005S)" Standard ROM
*Font Palatino-Roman: Standard "(001.005S)" Standard ROM
*Font Symbol: Special "(001.007S)" Special ROM
*Font Times-Bold: Standard "(001.007S)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
*Font Times-Italic: Standard "(001.007S)" Standard ROM
*Font Times-Roman: Standard "(001.007S)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
*Font ZapfDingbats: Special "(001.004S)" Standard ROM