# Traditional Chinese Messages for libgphoto2_port
# Copyright (C) 2002, 05 Free Software Foundation, Inc.
# Wang Li <charles@linux.net.cn>, 2002
# Wei-Lun Chao <chaoweilun@pcmail.com.tw>, 2005
#
msgid ""
msgstr ""
"Project-Id-Version: libgphoto2_port 2.1.6\n"
"Report-Msgid-Bugs-To: gphoto-devel@lists.sourceforge.net\n"
"POT-Creation-Date: 2011-03-13 23:34+0100\n"
"PO-Revision-Date: 2005-09-13 15:02+0800\n"
"Last-Translator: Wei-Lun Chao <chaoweilun@pcmail.com.tw>\n"
"Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: libgphoto2_port/gphoto2-port-info-list.c:213
#, c-format
msgid "Called for filename '%s'."
msgstr "由名為「%s」的檔案所呼叫。"

#: libgphoto2_port/gphoto2-port-info-list.c:218
#, c-format
msgid "Could not load '%s': '%s'."
msgstr "無法載入「%s」：「%s」。"

#: libgphoto2_port/gphoto2-port-info-list.c:226
#, c-format
msgid "Could not find some functions in '%s': '%s'."
msgstr "無法在「%s」中找到某些功能：「%s」"

#: libgphoto2_port/gphoto2-port-info-list.c:238
#, c-format
msgid "'%s' already loaded"
msgstr "「%s」已載入"

#: libgphoto2_port/gphoto2-port-info-list.c:247
#, c-format
msgid "Could not load port driver list: '%s'."
msgstr "無法載入連接埠驅動程式清單：「%s」。"

#: libgphoto2_port/gphoto2-port-info-list.c:254
#, c-format
msgid "Loaded '%s' ('%s') from '%s'."
msgstr "已載入的「%s」(「%s」)來自於「%s」。"

#: libgphoto2_port/gphoto2-port-info-list.c:286
#, c-format
msgid "Using ltdl to load io-drivers from '%s'..."
msgstr "使用 ltdl 以從「%s」載入輸出入驅動程式 ..."

#: libgphoto2_port/gphoto2-port-info-list.c:312
#, c-format
msgid "Counting entries (%i available)..."
msgstr "計數條目 (%i 項可用)..."

#: libgphoto2_port/gphoto2-port-info-list.c:321
#, c-format
msgid "%i regular entries available."
msgstr "%i 項正規條目可用。"

#: libgphoto2_port/gphoto2-port-info-list.c:351
#, c-format
msgid "Looking for path '%s' (%i entries available)..."
msgstr "正在尋找路徑「%s」(%i 項條目可用)..."

#: libgphoto2_port/gphoto2-port-info-list.c:363
#, c-format
msgid "Starting regex search for '%s'..."
msgstr "開始以正規表示式尋找「%s」..."

#: libgphoto2_port/gphoto2-port-info-list.c:371
#, c-format
msgid "Trying '%s'..."
msgstr "正在嘗試「%s」..."

#: libgphoto2_port/gphoto2-port-info-list.c:392
msgid "regcomp failed"
msgstr "正規表示式編譯失敗"

#: libgphoto2_port/gphoto2-port-info-list.c:403
#, c-format
msgid "re_match failed (%i)"
msgstr "正規表示式匹配失敗 (%i)"

#: libgphoto2_port/gphoto2-port-info-list.c:411
msgid "regexec failed"
msgstr "正規表示式執行失敗"

#: libgphoto2_port/gphoto2-port-info-list.c:417
msgid "Generic Port"
msgstr "通用連接埠"

#: libgphoto2_port/gphoto2-port-info-list.c:441
#, c-format
msgid "Looking up entry '%s'..."
msgstr "正在尋找條目「%s」..."

#: libgphoto2_port/gphoto2-port-info-list.c:471
#, c-format
msgid "Getting info of entry %i (%i available)..."
msgstr "正在取得條目 %i 的資訊 (%i 項可用)..."

#: libgphoto2_port/gphoto2-port-result.c:58
msgid "No error"
msgstr "無錯誤"

#: libgphoto2_port/gphoto2-port-result.c:60
msgid "Unspecified error"
msgstr "未指明的錯誤"

#: libgphoto2_port/gphoto2-port-result.c:62
msgid "I/O problem"
msgstr "I/O 問題"

#: libgphoto2_port/gphoto2-port-result.c:64
msgid "Bad parameters"
msgstr "不當的參數"

#: libgphoto2_port/gphoto2-port-result.c:66
msgid "Unsupported operation"
msgstr "不支援的操作"

#: libgphoto2_port/gphoto2-port-result.c:68
msgid "Fixed limit exceeded"
msgstr ""

#: libgphoto2_port/gphoto2-port-result.c:70
msgid "Timeout reading from or writing to the port"
msgstr "讀取或寫入連接埠逾時"

#: libgphoto2_port/gphoto2-port-result.c:72
msgid "Serial port not supported"
msgstr "不支援序列埠"

#: libgphoto2_port/gphoto2-port-result.c:74
msgid "USB port not supported"
msgstr "不支援 USB 介面"

#: libgphoto2_port/gphoto2-port-result.c:76
msgid "Unknown port"
msgstr "不明連接埠"

#: libgphoto2_port/gphoto2-port-result.c:78
msgid "Out of memory"
msgstr "記憶體耗盡"

#: libgphoto2_port/gphoto2-port-result.c:80
msgid "Error loading a library"
msgstr "載入函式庫時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:82
msgid "Error initializing the port"
msgstr "初始化連接埠時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:84
msgid "Error reading from the port"
msgstr "讀取連接埠時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:86
msgid "Error writing to the port"
msgstr "寫入連接埠時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:88
msgid "Error updating the port settings"
msgstr "更新連接埠設定時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:90
msgid "Error setting the serial port speed"
msgstr "設定序列埠速度時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:92
msgid "Error clearing a halt condition on the USB port"
msgstr "清除 USB 連接埠的一個中止條件時錯誤"

#: libgphoto2_port/gphoto2-port-result.c:94
msgid "Could not find the requested device on the USB port"
msgstr "無法在 USB 連接埠找到要求的裝置"

#: libgphoto2_port/gphoto2-port-result.c:96
msgid "Could not claim the USB device"
msgstr "無法要求 USB 裝置"

#: libgphoto2_port/gphoto2-port-result.c:98
msgid "Could not lock the device"
msgstr "無法鎖定裝置"

#: libgphoto2_port/gphoto2-port-result.c:100
#, fuzzy
msgid "libhal error"
msgstr "無錯誤"

#: libgphoto2_port/gphoto2-port-result.c:102
msgid "Unknown error"
msgstr "不明的錯誤"

#: libgphoto2_port/gphoto2-port.c:55
#, c-format
msgid "The operation '%s' is not supported by this device"
msgstr "這個裝置不支援「%s」操作"

#: libgphoto2_port/gphoto2-port.c:56
msgid "The port has not yet been initialized"
msgstr "連接埠尚未初始化"

#: libgphoto2_port/gphoto2-port.c:87
msgid "Creating new device..."
msgstr "建立新的裝置..."

#: libgphoto2_port/gphoto2-port.c:165
#, c-format
msgid "Could not load '%s' ('%s')."
msgstr "無法載入「%s」(「%s」)。"

#: libgphoto2_port/gphoto2-port.c:175
#, c-format
msgid "Could not find 'gp_port_library_operations' in '%s' ('%s')"
msgstr "無法在「%s」(「%s」) 之中找到「gp_port_library_operations」"

#: libgphoto2_port/gphoto2-port.c:265
#, c-format
msgid "Opening %s port..."
msgstr "正在開啟 %s 連接埠..."

#: libgphoto2_port/gphoto2-port.c:287
msgid "Closing port..."
msgstr "正在關閉連接埠..."

#: libgphoto2_port/gphoto2-port.c:309
msgid "Freeing port..."
msgstr "正在釋放連接埠..."

#: libgphoto2_port/gphoto2-port.c:356
#, c-format
msgid "Writing %i=0x%x byte(s) to port..."
msgstr "正在寫入 %i=0x%x 位元組到連接埠... "

#: libgphoto2_port/gphoto2-port.c:369
#, c-format
msgid "Could only write %i out of %i byte(s)"
msgstr "只能夠寫入 %1$i 位元組之中的 %2$i"

#: libgphoto2_port/gphoto2-port.c:392
#, c-format
msgid "Reading %i=0x%x bytes from port..."
msgstr "正在從連接埠讀取 %i=0x%x 位元組..."

#: libgphoto2_port/gphoto2-port.c:403 libgphoto2_port/gphoto2-port.c:440
#: libgphoto2_port/gphoto2-port.c:480 libgphoto2_port/gphoto2-port.c:905
#, c-format
msgid "Could only read %i out of %i byte(s)"
msgstr "只能夠寫入 %1$i 位元組之中的 %2$i"

#: libgphoto2_port/gphoto2-port.c:429
#, c-format
msgid "Reading %i=0x%x bytes from interrupt endpoint..."
msgstr "正在從中斷結束點讀取 %i=0x%x 位元組..."

#: libgphoto2_port/gphoto2-port.c:490
#, c-format
msgid "Reading %i=0x%x bytes from interrupt endpoint (fast)..."
msgstr "正在從中斷結束點讀取 %i=0x%x 位元組 (快速)..."

#: libgphoto2_port/gphoto2-port.c:515
#, c-format
msgid "Setting timeout to %i millisecond(s)..."
msgstr "正在設定逾時為 %i 毫秒..."

#: libgphoto2_port/gphoto2-port.c:551
msgid "Getting timeout..."
msgstr "將要達到逾時..."

#: libgphoto2_port/gphoto2-port.c:555
#, c-format
msgid "Current timeout: %i milliseconds"
msgstr "目前逾時設定：%i 毫秒"

#: libgphoto2_port/gphoto2-port.c:577
msgid "Setting settings..."
msgstr "正在做設定..."

#: libgphoto2_port/gphoto2-port.c:638
#, c-format
msgid "Getting level of pin %i..."
msgstr "正在擷取針腳 %i 的層級..."

#: libgphoto2_port/gphoto2-port.c:647
#, c-format
msgid "Level of pin %i: %i"
msgstr "針腳 %i 的層級：%i"

#: libgphoto2_port/gphoto2-port.c:673
msgid "low"
msgstr "低"

#: libgphoto2_port/gphoto2-port.c:674
msgid "high"
msgstr "高"

#: libgphoto2_port/gphoto2-port.c:700
#, c-format
msgid "Setting pin %i (%s: '%s') to '%s'..."
msgstr "正在設定針腳 %i (%s：「%s」) 為「%s」..."

#: libgphoto2_port/gphoto2-port.c:727
#, c-format
msgid "Sending break (%i milliseconds)..."
msgstr "正在傳送中斷 (%i 毫秒)..."

#: libgphoto2_port/gphoto2-port.c:753
msgid "Flushing port..."
msgstr "正在重新整理連接埠..."

#: libgphoto2_port/gphoto2-port.c:827
msgid "Clear halt..."
msgstr "清除停止..."

#: libgphoto2_port/gphoto2-port.c:858
#, c-format
msgid "Writing message (request=0x%x value=0x%x index=0x%x size=%i=0x%x)..."
msgstr "正在寫入訊息 (要求=0x%x 值=0x%x 索引=0x%x 大小=%i=0x%x)..."

#: libgphoto2_port/gphoto2-port.c:893
#, c-format
msgid "Reading message (request=0x%x value=0x%x index=0x%x size=%i=0x%x)..."
msgstr "正在讀取訊息 (要求=0x%x 值=0x%x 索引=0x%x 大小=%i=0x%x)..."

#: libgphoto2_port/gphoto2-port.c:900
msgid "msg_read"
msgstr "msg_read"

#: libgphoto2_port/gphoto2-port.c:1205
msgid "No error description available"
msgstr "沒有可用的錯誤描述"

#: serial/unix.c:241
#, c-format
msgid "Could not lock device '%s'"
msgstr "無法鎖定裝置「%s」"

#: serial/unix.c:251 usbdiskdirect/linux.c:94 usbscsi/linux.c:95
#, c-format
msgid "Device '%s' is locked by pid %d"
msgstr "裝置「%s」已經被行程編號為 %d 的行程鎖定"

#: serial/unix.c:254 usbdiskdirect/linux.c:97 usbscsi/linux.c:98
#, c-format
msgid "Device '%s' could not be locked (dev_lock returned %d)"
msgstr "無法鎖定裝置「%s」(dev_lock 回傳 %d)"

#: serial/unix.c:288
#, c-format
msgid "Device '%s' could not be unlocked."
msgstr "無法解鎖裝置「%s」。"

#: serial/unix.c:300 usbdiskdirect/linux.c:126 usbscsi/linux.c:127
#, c-format
msgid "Device '%s' could not be unlocked as it is locked by pid %d."
msgstr "由於裝置「%s」已被行程編號為 %d 的行程鎖定，所以無法解鎖。"

#: serial/unix.c:304 usbdiskdirect/linux.c:130 usbscsi/linux.c:131
#, c-format
msgid "Device '%s' could not be unlocked (dev_unlock returned %d)"
msgstr "無法解鎖裝置「%s」(dev_unlock 回傳 %d)"

#: serial/unix.c:385
#, c-format
msgid "Serial Port %i"
msgstr "序列埠 %i"

#: serial/unix.c:476 usbdiskdirect/linux.c:285 usbscsi/linux.c:287
#, c-format
msgid "Failed to open '%s' (%m)."
msgstr "開啟「%s」(%m)失敗。"

#: serial/unix.c:494 usbdiskdirect/linux.c:299 usbscsi/linux.c:301
#, c-format
msgid "Could not close '%s' (%m)."
msgstr "無法關閉「%s」(%m)。"

#: serial/unix.c:548
#, c-format
msgid "Could not write to port (%m)"
msgstr "無法寫入連接埠 (%m)"

#: serial/unix.c:625
msgid "Parity error."
msgstr "奇偶檢查錯誤。"

#: serial/unix.c:629
#, c-format
msgid "Unexpected parity response sequence 0xff 0x%02x."
msgstr "意外的奇偶應答序列 0xff 0x%02x。"

#: serial/unix.c:672
#, c-format
msgid "Unknown pin %i."
msgstr "不明針腳 %i。"

#: serial/unix.c:694
#, c-format
msgid "Could not get level of pin %i (%m)."
msgstr "無法獲取針腳 %i 的層級 (%m)。"

#: serial/unix.c:729
#, c-format
msgid "Could not set level of pin %i to %i (%m)."
msgstr "無法將針腳 %i 的層級設定為 %i (%m)。"

#: serial/unix.c:754
#, c-format
msgid "Could not flush '%s' (%m)."
msgstr "無法重新整理「%s」(%m)。"

#: serial/unix.c:867
#, c-format
msgid "Could not set the baudrate to %d"
msgstr "無法將鮑率設定為 %d"

#: usb/libusb.c:248
#, c-format
msgid "Could not open USB device (%m)."
msgstr "無法開啟 USB 裝置 (%m)。"

#: usb/libusb.c:260
msgid "Camera is already in use."
msgstr "照相機正在使用。"

#: usb/libusb.c:265
#, c-format
msgid "Device has driver '%s' attached, detaching it now."
msgstr "裝置已附掛驅動程式「%s」，現在卸掛它。"

#: usb/libusb.c:268
#, c-format
msgid "Could not detach kernel driver '%s' of camera device."
msgstr "無法卸掛照相機裝置的核心驅動程式「%s」。"

#: usb/libusb.c:273
msgid "Could not query kernel driver of device."
msgstr "無法查詢裝置的核心驅動程式。"

#: usb/libusb.c:281
#, c-format
msgid ""
"Could not claim interface %d (%m). Make sure no other program or kernel "
"module (such as %s) is using the device and you have read/write access to "
"the device."
msgstr ""
"無法請求介面 %d (%m)。請確認沒有其它程式或核心模組 (例如 %s) 正在使用這個裝"
"置，並且您有對這個裝置的讀/寫權。"

#: usb/libusb.c:299
#, c-format
msgid "Could not release interface %d (%m)."
msgstr "無法釋放介面 %d (%m)。"

#: usb/libusb.c:312
#, fuzzy, c-format
msgid "Could not reset USB port (%m)."
msgstr "無法關閉 USB 連接埠 (%m)。"

#: usb/libusb.c:339
#, c-format
msgid "Could not close USB port (%m)."
msgstr "無法關閉 USB 連接埠 (%m)。"

#: usb/libusb.c:588
#, c-format
msgid "Could not set config %d/%d (%m)"
msgstr "無法設定配置 %d/%d (%m)"

#: usb/libusb.c:621
#, fuzzy, c-format
msgid "Could not set altsetting from %d to %d (%m)"
msgstr "無法設定補充設定 %d/%d (%m)"

#: usb/libusb.c:713
#, c-format
msgid "The supplied vendor or product id (0x%x,0x%x) is not valid."
msgstr "提供的廠商或產品 id (0x%x、0x%x) 不正確。"

#: usb/libusb.c:749
#, c-format
msgid ""
"USB device (vendor 0x%x, product 0x%x) is a mass storage device, and might "
"not function with gphoto2. Reference: %s"
msgstr ""
"USB 裝置 (廠商 0x%x、產品 0x%x) 是個大量儲存裝置，而且也許無法與 gphoto2 一起"
"作用。參考：%s"

#: usb/libusb.c:792
#, c-format
msgid ""
"Could not find USB device (vendor 0x%x, product 0x%x). Make sure this device "
"is connected to the computer."
msgstr "無法找到 USB 裝置 (廠商 0x%x、產品 0x%x)。請確認這個裝置已連接到電腦。"

#: usb/libusb.c:1090
#, c-format
msgid ""
"Could not find USB device (class 0x%x, subclass 0x%x, protocol 0x%x). Make "
"sure this device is connected to the computer."
msgstr ""
"無法找到 USB 裝置 (類別 0x%x、子類 0x%x、協定 0x%x)。請確認這個裝置已連接到電"
"腦。"

#: disk/disk.c:179 disk/disk.c:229 disk/disk.c:270 disk/disk.c:302
#: disk/disk.c:325
#, c-format
msgid "Media '%s'"
msgstr ""

#: disk/disk.c:180
msgid "(unknown)"
msgstr ""

#: usbdiskdirect/linux.c:230
#, c-format
msgid "USB Mass Storage direct IO"
msgstr ""

#: usbdiskdirect/linux.c:324
#, fuzzy, c-format
msgid "Could not seek to offset: %x on '%s' (%m)."
msgstr "無法關閉「%s」(%m)。"

#: usbdiskdirect/linux.c:347
#, fuzzy, c-format
msgid "Could not write to '%s' (%m)."
msgstr "無法寫入連接埠 (%m)"

#: usbdiskdirect/linux.c:369
#, fuzzy, c-format
msgid "Could not read from '%s' (%m)."
msgstr "無法關閉「%s」(%m)。"

#: usbscsi/linux.c:232
#, c-format
msgid "USB Mass Storage raw SCSI"
msgstr ""

#: usbscsi/linux.c:345
#, fuzzy, c-format
msgid "Could not send scsi command to: '%s' (%m)."
msgstr "無法關閉「%s」(%m)。"

#~ msgid "Loading io-drivers from '%s' without ltdl..."
#~ msgstr "正從「%s」中載入輸出入驅動程式而不使用 ltdl..."

#~ msgid "Could not load any io-library because '%s' could not be opened (%m)"
#~ msgstr "由於無法開啟「%s」(%m)，所以無法載入任何輸出入函式庫"

#~ msgid "'%s' is not a library (%s)"
#~ msgstr "「%s」不是一個函式庫 (%s)"

#~ msgid "Could not find some functions in '%s' (%s)"
#~ msgstr "無法在「%s」中找到某些功能 (%s)"

#~ msgid "Could not load list (%s)"
#~ msgstr "無法載入清單 (%s)"

#~ msgid "Loaded '%s' (%s) from '%s'"
#~ msgstr "已載入的「%s」(%s) 來自於「%s」"

#~ msgid "Could not load '%s' ('%s')"
#~ msgstr "無法載入「%s」(「%s」)"