menu "SoC selection"

config SOC_MICROCHIP_POLARFIRE
	bool "Microchip PolarFire SoCs"
	select MCHP_CLK_MPFS
	select SIFIVE_PLIC
	help
	  This enables support for Microchip PolarFire SoC platforms.

config SOC_SIFIVE
	bool "SiFive SoCs"
	select SERIAL_SIFIVE if TTY
	select SERIAL_SIFIVE_CONSOLE if TTY
	select CLK_SIFIVE
	select CLK_SIFIVE_PRCI
	select SIFIVE_PLIC
	select RISCV_ERRATA_ALTERNATIVE
	select ERRATA_SIFIVE
	help
	  This enables support for SiFive SoC platform hardware.

config SOC_STARFIVE
	bool "StarFive Socs"
	select SOC_SIFIVE
	select OF_RESERVED_MEM
	select SIFIVE_L2
	select SIFIVE_L2_FLUSH
	select DW_AXI_DMAC_STARFIVE
	help
	  StarFive JH SOC platform

choice
	prompt "StarFive JH SOCs"
	help
	  choice StarFive JH SOC platform

	config SOC_STARFIVE_VIC7100
		bool "VIC7100"
		select HW_RANDOM_STARFIVE_VIC
		depends on SOC_STARFIVE
		help
		  This enables support for StarFive VIC7100 SoC Platform Hardware.

	config SOC_STARFIVE_JH7110
		bool "JH7110"
		select HW_RANDOM_STARFIVE_TRNG
		depends on SOC_STARFIVE
		help
		  This enables support for StarFive JH7110 SoC Platform Hardware.
endchoice

menu "StarFive JH SoC Debug Option"
	depends on SOC_STARFIVE

choice
	prompt "JH SOC GMAC Speed"
	depends on SOC_STARFIVE
	default FPGA_GMAC_SPEED_AUTO
	help
	  choice VIC7100 GMAC speed.
	  (GMAC only works well on 10M/duple, for FPGA board.)

	config FPGA_GMAC_SPEED10
		bool "GMAC works on 10M mode"
	config FPGA_GMAC_SPEED100
		bool "GMAC works on 100M mode"
	config FPGA_GMAC_SPEED_AUTO
		bool "GMAC works on auto mode"
endchoice

config FPGA_GMAC_FLUSH_DDR
	bool "VIC7100 SOC GMAC description and packet buffer flush"
	depends on SOC_STARFIVE_VIC7100
	depends on STMMAC_ETH
	default y if SOC_STARFIVE_VIC7100
	help
	  enable VIC7100 GMAC description and packet buffer flush

config MMC_DW_FLUSH_DDR
	bool "VIC7100 SOC DW MMC buffer flush"
	depends on SOC_STARFIVE_VIC7100
	depends on MMC_DW
	default y if SOC_STARFIVE_VIC7100
	help
	  enable VIC7100 DW MMC description and data buffer flush

config USB_CDNS3_HOST_FLUSH_DMA
	bool "Cadence USB3 host controller flush dma memery"
	depends on USB
	depends on USB_CDNS3
	depends on SOC_STARFIVE_VIC7100
	default y if SOC_STARFIVE_VIC7100
	help
	  enable VIC7100 DW USB CDNS3 driver data buffer flush

endmenu

config SOC_VIRT
	bool "QEMU Virt Machine"
	select CLINT_TIMER if RISCV_M_MODE
	select POWER_RESET
	select POWER_RESET_SYSCON
	select POWER_RESET_SYSCON_POWEROFF
	select GOLDFISH
	select RTC_DRV_GOLDFISH if RTC_CLASS
	select SIFIVE_PLIC
	help
	  This enables support for QEMU Virt Machine.

config SOC_CANAAN
	bool "Canaan Kendryte K210 SoC"
	depends on !MMU
	select CLINT_TIMER if RISCV_M_MODE
	select SERIAL_SIFIVE if TTY
	select SERIAL_SIFIVE_CONSOLE if TTY
	select SIFIVE_PLIC
	select ARCH_HAS_RESET_CONTROLLER
	select PINCTRL
	select COMMON_CLK
	select COMMON_CLK_K210
	help
	  This enables support for Canaan Kendryte K210 SoC platform hardware.

if SOC_CANAAN

config SOC_CANAAN_K210_DTB_BUILTIN
	bool "Builtin device tree for the Canaan Kendryte K210"
	depends on SOC_CANAAN
	default y
	select OF
	select BUILTIN_DTB
	help
	  Build a device tree for the Kendryte K210 into the Linux image.
	  This option should be selected if no bootloader is being used.
	  If unsure, say Y.

config SOC_CANAAN_K210_DTB_SOURCE
	string "Source file for the Canaan Kendryte K210 builtin DTB"
	depends on SOC_CANAAN
	depends on SOC_CANAAN_K210_DTB_BUILTIN
	default "k210_generic"
	help
	  Base name (without suffix, relative to arch/riscv/boot/dts/canaan)
	  for the DTS file that will be used to produce the DTB linked into the
	  kernel.

endif

endmenu