menu "mpc8xx CPU"
	depends on MPC8xx

config SYS_CPU
	default "mpc8xx"

choice
	prompt "Target select"
	optional

config TARGET_MCR3000
	bool "Support MCR3000 board from CSSI"

endchoice

choice
	prompt "CPU select"
	default MPC866

config MPC866
	bool "MPC866"
	select SYS_CACHE_SHIFT_4

config MPC885
	bool "MPC885"
	select SYS_CACHE_SHIFT_4

endchoice

config 8xx_GCLK_FREQ
	int "CPU GCLK Frequency"

comment "Specific commands"

config CMD_IMMAP
	bool "Enable various commands to dump IMMR information"
	help
	  This enables various commands such as:

	    siuinfo - print System Interface Unit (SIU) registers
	    memcinfo - print Memory Controller registers

comment "Configuration Registers"

config SYS_SIUMCR
	hex "SIUMCR register"
	help
	  SIU Module Configuration (11-6)

config SYS_SYPCR
	hex "SYPCR register"
	help
	  System Protection Control (11-9)

config SYS_TBSCR
	hex "TBSCR register"
	help
	  Time Base Status and Control (11-26)

config SYS_PISCR
	hex "PISCR register"
	help
	  Periodic Interrupt Status and Control (11-31)

config SYS_PLPRCR_BOOL
	bool "Customise PLPRCR"

config SYS_PLPRCR
	hex "PLPRCR register"
	depends on SYS_PLPRCR_BOOL
	help
	  PLL, Low-Power, and Reset Control Register (15-30)

config SYS_SCCR
	hex "SCCR register"
	help
	  System Clock and reset Control Register (15-27)

config SYS_SCCR_MASK
	hex "MASK for setting SCCR register"

config SYS_DER
	hex "DER register"
	help
	  Debug Event Register (37-47)

comment "Memory mapping"

config SYS_BR0_PRELIM
	hex "Preliminary value for BR0"

config SYS_OR0_PRELIM
	hex "Preliminary value for OR0"

config SYS_BR1_PRELIM_BOOL
	bool "Define Bank 1"

config SYS_BR1_PRELIM
	hex "Preliminary value for BR1"
	depends on SYS_BR1_PRELIM_BOOL

config SYS_OR1_PRELIM
	hex "Preliminary value for OR1"
	depends on SYS_BR1_PRELIM_BOOL

config SYS_BR2_PRELIM_BOOL
	bool "Define Bank 2"

config SYS_BR2_PRELIM
	hex "Preliminary value for BR2"
	depends on SYS_BR2_PRELIM_BOOL

config SYS_OR2_PRELIM
	hex "Preliminary value for OR2"
	depends on SYS_BR2_PRELIM_BOOL

config SYS_BR3_PRELIM_BOOL
	bool "Define Bank 3"

config SYS_BR3_PRELIM
	hex "Preliminary value for BR3"
	depends on SYS_BR3_PRELIM_BOOL

config SYS_OR3_PRELIM
	hex "Preliminary value for OR3"
	depends on SYS_BR3_PRELIM_BOOL

config SYS_BR4_PRELIM_BOOL
	bool "Define Bank 4"

config SYS_BR4_PRELIM
	hex "Preliminary value for BR4"
	depends on SYS_BR4_PRELIM_BOOL

config SYS_OR4_PRELIM
	hex "Preliminary value for OR4"
	depends on SYS_BR4_PRELIM_BOOL

config SYS_BR5_PRELIM_BOOL
	bool "Define Bank 5"

config SYS_BR5_PRELIM
	hex "Preliminary value for BR5"
	depends on SYS_BR5_PRELIM_BOOL

config SYS_OR5_PRELIM
	hex "Preliminary value for OR5"
	depends on SYS_BR5_PRELIM_BOOL

config SYS_BR6_PRELIM_BOOL
	bool "Define Bank 6"

config SYS_BR6_PRELIM
	hex "Preliminary value for BR6"
	depends on SYS_BR6_PRELIM_BOOL

config SYS_OR6_PRELIM
	hex "Preliminary value for OR6"
	depends on SYS_BR6_PRELIM_BOOL

config SYS_BR7_PRELIM_BOOL
	bool "Define Bank 7"

config SYS_BR7_PRELIM
	hex "Preliminary value for BR7"
	depends on SYS_BR7_PRELIM_BOOL

config SYS_OR7_PRELIM
	hex "Preliminary value for OR7"
	depends on SYS_BR7_PRELIM_BOOL

config SYS_IMMR
	hex "Value for IMMR"

source "board/cssi/MCR3000/Kconfig"

endmenu