/dts-v1/;

#include "bcm2709.dtsi"
#include "bcm2709-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-csi1-2lane.dtsi"
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"

/ {
	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
	model = "Raspberry Pi 2 Model B";

	rpi_backlight: rpi_backlight {
		compatible = "raspberrypi,rpi-backlight";
		firmware = <&firmware>;
		status = "okay";
	};

	rpi_ft5406: rpi_ft5406 {
		compatible = "rpi,rpi-ft5406";
		firmware = <&firmware>;
		status = "okay";
	};
};

&gpio {
	spi0_pins: spi0_pins {
		brcm,pins = <9 10 11>;
		brcm,function = <4>; /* alt0 */
	};

	spi0_cs_pins: spi0_cs_pins {
		brcm,pins = <8 7>;
		brcm,function = <1>; /* output */
	};

	i2c0_pins: i2c0 {
		brcm,pins = <0 1>;
		brcm,function = <4>;
	};

	i2c1_pins: i2c1 {
		brcm,pins = <2 3>;
		brcm,function = <4>;
	};

	i2s_pins: i2s {
		brcm,pins = <18 19 20 21>;
		brcm,function = <4>; /* alt0 */
	};

	audio_pins: audio_pins {
		brcm,pins = <40 45>;
		brcm,function = <4>;
	};
};

&uart0 {
	status = "okay";
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
	status = "okay";

	spidev0: spidev@0{
		compatible = "spidev";
		reg = <0>;	/* CE0 */
		#address-cells = <1>;
		#size-cells = <0>;
		spi-max-frequency = <125000000>;
	};

	spidev1: spidev@1{
		compatible = "spidev";
		reg = <1>;	/* CE1 */
		#address-cells = <1>;
		#size-cells = <0>;
		spi-max-frequency = <125000000>;
	};
};

&i2c0if {
	clock-frequency = <100000>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	clock-frequency = <100000>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	status = "okay";
};

&dpi {
	status = "okay";
};

&hvs {
	status = "okay";
};

&pixelvalve0 {
	status = "okay";
};

&pixelvalve1 {
	status = "okay";
};

&pixelvalve2 {
	status = "okay";
};

&v3d {
	status = "okay";
};

&vc4 {
	status = "okay";
};

&i2s {
	pinctrl-names = "default";
	pinctrl-0 = <&i2s_pins>;
	status = "okay";
};

&leds {
	act_led: led-act {
		label = "led0";
		linux,default-trigger = "mmc0";
		gpios = <&gpio 47 0>;
	};

	pwr_led: led-pwr {
		label = "led1";
		linux,default-trigger = "input";
		gpios = <&gpio 35 0>;
	};
};

&hdmi {
	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&audio {
	pinctrl-names = "default";
	pinctrl-0 = <&audio_pins>;
	status = "okay";
};

&cam1_reg {
	gpio = <&gpio 41 GPIO_ACTIVE_HIGH>;
};

cam0_reg: &cam_dummy_reg {
};

/ {
	__overrides__ {
		act_led_gpio = <&act_led>,"gpios:4";
		act_led_activelow = <&act_led>,"gpios:8";
		act_led_trigger = <&act_led>,"linux,default-trigger";

		pwr_led_gpio = <&pwr_led>,"gpios:4";
		pwr_led_activelow = <&pwr_led>,"gpios:8";
		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
	};
};

&i2c_dsi {
	gpios = <&gpio 28 0
		 &gpio 29 0>;
	status = "okay";
};

&dsi1 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	pitouchscreen: panel@0 {
		compatible = "raspberrypi,touchscreen";
		reg = <0>;
		raspberrypi,touchscreen-bridge = <&pitouchscreen_bridge>;
	};
};