# # Makefile for directory with subdirs to build. # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ # srcdir = . prefix = /usr/local exec_prefix = $(prefix) bindir = $(exec_prefix)/bin libdir = $(exec_prefix)/lib tooldir = $(exec_prefix)/$(target) program_transform_name = datadir = $(prefix)/lib mandir = $(prefix)/man man1dir = $(mandir)/man1 man2dir = $(mandir)/man2 man3dir = $(mandir)/man3 man4dir = $(mandir)/man4 man5dir = $(mandir)/man5 man6dir = $(mandir)/man6 man7dir = $(mandir)/man7 man8dir = $(mandir)/man8 man9dir = $(mandir)/man9 infodir = $(prefix)/info includedir = $(prefix)/include docdir = $(datadir)/doc SHELL = /bin/sh INSTALL = cp INSTALL_PROGRAM = $(INSTALL) INSTALL_DATA = $(INSTALL) AS = as AR = ar AR_FLAGS = rc CC = cc CFLAGS = -g # start-sanitize-chill CHILLFLAGS = $(CFLAGS) CHILL_LIB = -lchill # end-sanitize-chill CXX = gcc CXXFLAGS = -g -O RANLIB = ranlib NM = nm MUNCH_NM = $(NM) GZIP = gzip COMPRESS = compress # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove. BISON = `if [ -f $${rootme}/byacc/byacc ] ; \ then echo $${rootme}/byacc/byacc ; \ else echo byacc ; \ fi` LEX = `if [ -f $${rootme}/flex/flex ] ; \ then echo $${rootme}/flex/flex ; \ else echo flex ; fi` MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \ then echo $${rootme}/texinfo/makeinfo/makeinfo ; \ else echo makeinfo ; fi` EXPECT = `if [ -f $${rootme}/expect/expect ] ; \ then echo $${rootme}/expect/expect ; \ else echo expect ; fi` RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \ then echo $${srcroot}/dejagnu/runtest ; \ else echo runtest ; fi` # libraries that may need to be augmented on a system-by-system basis X11_LIB = -lX11 # compilers to use to create programs which must be run in the build # environment. CC_FOR_BUILD = $(CC) CXX_FOR_BUILD = $(CXX) SUBDIRS = "this is set via configure, don't edit this" OTHERS = ALL = all.normal INSTALL_TARGET = install.all CC_FOR_TARGET = ` \ if [ -f $${rootme}/gcc/Makefile ] ; then \ echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ else \ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ fi; \ fi` # start-sanitize-chill CHILL_FOR_TARGET = ` \ if [ -f $${rootme}/gcc/Makefile ] ; then \ echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ else \ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ fi; \ fi` # end-sanitize-chill CXX_FOR_TARGET = ` \ if [ -f $${rootme}/gcc/Makefile ] ; then \ echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CXX); \ else \ t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ fi; \ fi` AS_FOR_TARGET = ` \ if [ -f $${rootme}/gas/Makefile ] ; then \ echo $${rootme}/gas/as.new ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(AS); \ else \ t='$(program_transform_name)'; echo as | sed -e '' $$t ; \ fi; \ fi` AR_FOR_TARGET = ` \ if [ -f $${rootme}/binutils/Makefile ] ; then \ echo $${rootme}/binutils/ar ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(AR); \ else \ t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \ fi; \ fi` RANLIB_FOR_TARGET = ` \ if [ -f $${rootme}/binutils/Makefile ] ; then \ echo $${rootme}/binutils/ranlib ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(RANLIB); \ else \ t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \ fi; \ fi` NM_FOR_TARGET = ` \ if [ -f $${rootme}/binutils/Makefile ] ; then \ echo $${rootme}/binutils/nm ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(NM); \ else \ t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \ fi; \ fi` # FIXME: This is badly named. XTRAFLAGS = ` \ if [ -f $${rootme}/gcc/Makefile ] ; then \ if [ -f $${rootme}/newlib/Makefile ] ; then \ echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \ else \ echo -I$${rootme}/gcc/include ; \ fi ; \ else \ echo ; \ fi` PRMS = all-prms #### host and target specific makefile fragments come in here. ### # Flags to pass down to all sub-makes. # Please keep these in alphabetical order. BASE_FLAGS_TO_PASS = \ "AR_FLAGS=$(AR_FLAGS)" \ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \ "BISON=$(BISON)" \ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ "CFLAGS=$(CFLAGS)" \ $(start-sanitize-chill)\ "CHILLFLAGS=$(CHILLFLAGS)" \ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \ "CHILL_LIB=$(CHILL_LIB)" \ $(end-sanitize-chill)\ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \ "CXXFLAGS=$(CXXFLAGS)" \ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ "LDFLAGS=$(LDFLAGS)" \ "LEX=$(LEX)" \ "LOADLIBES=$(LOADLIBES)" \ "MAKEINFO=$(MAKEINFO)" \ "MUNCH_NM=$(MUNCH_NM)" \ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \ "PRMS=$(PRMS)" \ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ "EXPECT=$(EXPECT)" \ "RUNTEST=$(RUNTEST)" \ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \ "exec_prefix=$(exec_prefix)" \ "prefix=$(prefix)" \ "tooldir=$(tooldir)" # Flags to pass down to most sub-makes, in which we're building with # the host environment. # If any variables are added here, they must be added to do-*, below. EXTRA_HOST_FLAGS = \ 'AR=$(AR)' \ 'AS=$(AS)' \ 'CC=$(CC)' \ 'CXX=$(CXX)' \ 'NM=$(NM)' \ 'RANLIB=$(RANLIB)' \ 'XTRAFLAGS=' FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) # Flags that are concerned with the location of the X11 include files # and library files X11_FLAGS_TO_PASS = \ "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \ "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \ "X11_LIB=$(X11_LIB)" # Flags to pass down to makes which are built with the target environment. # The double $ decreases the length of the command line; the variables # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. # If any variables are added here, they must be added to do-*, below. EXTRA_TARGET_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ 'AS=$$(AS_FOR_TARGET)' \ 'CC=$$(CC_FOR_TARGET)' \ 'CXX=$$(CXX_FOR_TARGET)' \ 'NM=$$(NM_FOR_TARGET)' \ 'RANLIB=$$(RANLIB_FOR_TARGET)' \ 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)' TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it # unfortunately needs the native compiler and the target ar and # ranlib. # If any variables are added here, they must be added to do-*, below. # The HOST_* variables are a special case, which are used for the gcc # cross-building scheme. HOST_CC = $(CC_FOR_BUILD) HOST_PREFIX = HOST_PREFIX_1 = loser- EXTRA_GCC_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ 'AS=$(AS)' \ 'CC=$(CC)' \ 'CXX=$(CXX)' \ 'HOST_CC=$(CC_FOR_BUILD)' \ 'HOST_PREFIX=$(HOST_PREFIX)' \ 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \ 'NM=$(NM)' \ 'RANLIB=$$(RANLIB_FOR_TARGET)' \ 'XTRAFLAGS=' GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS) # This is a list of the targets for all of the modules which are compiled # using $(FLAGS_TO_PASS). ALL_MODULES = \ all-autoconf \ all-bfd \ all-binutils \ all-byacc \ all-cvs \ all-dejagnu \ all-diff \ all-etc \ all-fileutils \ all-find \ all-flex \ all-gas \ all-gawk \ all-gdb \ all-gprof \ all-grep \ all-gzip \ all-hello \ all-indent \ all-ispell \ all-ld \ all-libiberty \ all-m4 \ all-make \ all-mmalloc \ all-opcodes \ all-patch \ all-prms \ all-rcs \ all-readline \ all-release \ all-recode \ all-sed \ all-send-pr \ all-shellutils \ all-sim \ all-tar \ all-tcl \ all-texinfo \ all-textutils \ all-tgas \ all-time \ all-uudecode \ all-wdiff # This is a list of the check targets for all of the modules which are # compiled using $(FLAGS_TO_PASS). CHECK_MODULES = \ check-autoconf \ check-bfd \ check-binutils \ check-byacc \ check-cvs \ check-dejagnu \ check-diff \ check-etc \ check-fileutils \ check-find \ check-flex \ check-gas \ check-gawk \ check-gdb \ check-gprof \ check-grep \ check-gzip \ check-hello \ check-indent \ check-ispell \ check-ld \ check-libiberty \ check-m4 \ check-make \ check-mmcheckoc \ check-opcodes \ check-patch \ check-prms \ check-rcs \ check-readline \ check-recode \ check-sed \ check-send-pr \ check-shellutils \ check-sim \ check-tar \ check-tcl \ check-texinfo \ check-textutils \ check-tgas \ check-time \ check-uudecode \ check-wdiff # This is a list of the install targets for all of the modules which are # compiled using $(FLAGS_TO_PASS). INSTALL_MODULES = \ install-autoconf \ install-bfd \ install-binutils \ install-byacc \ install-cvs \ install-dejagnu \ install-diff \ install-etc \ install-fileutils \ install-find \ install-flex \ install-gas \ install-gawk \ install-gdb \ install-glob \ install-gprof \ install-grep \ install-gzip \ install-hello \ install-indent \ install-ispell \ install-ld \ install-libiberty \ install-m4 \ install-make \ install-mmalloc \ install-opcodes \ install-patch \ install-prms \ install-rcs \ install-readline \ install-recode \ install-sed \ install-send-pr \ install-shellutils \ install-sim \ install-tar \ install-tcl \ install-texinfo \ install-textutils \ install-tgas \ install-time \ install-uudecode \ install-wdiff # This is a list of the targets for all of the modules which are compiled # using $(X11_FLAGS_TO_PASS). ALL_X11_MODULES = \ all-emacs \ all-expect \ all-tclX \ all-tk # This is a list of the check targets for all of the modules which are # compiled using $(X11_FLAGS_TO_PASS). CHECK_X11_MODULES = \ check-emacs \ check-expect \ check-tclX \ check-tk # This is a list of the install targets for all the modules which are # compiled using $(X11_FLAGS_TO_PASS). INSTALL_X11_MODULES = \ install-emacs \ install-expect \ install-tclX \ install-tk # This is a list of the targets for all of the modules which are compiled # using $(TARGET_FLAGS_TO_PASS). ALL_TARGET_MODULES = \ $(start-sanitize-chill) \ all-chillrt \ $(end-sanitize-chill) \ all-libg++ \ all-newlib \ all-xiberty # This is a list of the check targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). CHECK_TARGET_MODULES = \ $(start-sanitize-chill) \ check-chillrt \ $(end-sanitize-chill) \ check-libg++ \ check-newlib \ check-xiberty # This is a list of the install targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). INSTALL_TARGET_MODULES = \ $(start-sanitize-chill) \ install-chillrt \ $(end-sanitize-chill) \ install-libg++ \ install-newlib \ install-xiberty # This is a shell case of all modules which are compiled using # $(TARGET_FLAGS_TO_PASS), used in the do-X rule. TARGET_LIBS = libg++ | newlib | xiberty # start-sanitize-chill TARGET_LIBS = chillrt | libg++ | newlib | xiberty # end-sanitize-chill # The first rule in the file had better be this one. Don't put any above it. all: $(ALL) .PHONY: all # The target built for a native build. .PHONY: all.normal all.normal: \ $(ALL_MODULES) \ $(ALL_TARGET_MODULES) \ $(ALL_X11_MODULES) \ all-gcc # The target built for a cross build. .PHONY: all.cross all.cross: \ all-bfd \ all-binutils \ all-byacc \ all-dejagnu \ all-flex \ all-gas \ all-gcc \ all-gdb \ all-ld \ all-libiberty \ all-mmalloc \ all-opcodes \ all-readline \ all-sim \ $(ALL_TARGET_MODULES) # Do a target for all the subdirectories. A ``make do-X'' will do a # ``make X'' in all subdirectories (because, in general, there is a # dependency (below) of X upon do-X, a ``make X'' will also do this, # but it may do additional work as well). # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once, # because it is so large that it can easily overflow the command line # length limit on some systems. DO_X = \ do-clean \ do-distclean \ do-dvi \ do-info \ do-install-info \ do-installcheck \ do-mostlyclean \ do-realclean .PHONY: $(DO_X) $(DO_X): @target=`echo $@ | sed -e 's/^do-//'`; \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ for i in $(SUBDIRS); do \ if [ -f ./$$i/Makefile ]; then \ case $$i in \ $(TARGET_LIBS) ) \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \ done; \ ;; \ gcc) \ for flag in $(EXTRA_GCC_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \ done; \ ;; \ *) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \ done; \ ;; \ esac ; \ export AR AS CC CXX NM RANLIB XTRAFLAGS; \ if (cd ./$$i; \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \ $${target}); \ then true; else exit 1; fi; \ else true; fi; \ done # Here are the targets which correspond to the do-X targets. .PHONY: info installcheck dvi install-info .PHONY: clean distclean mostlyclean realclean local-clean local-distclean info: do-info installcheck: do-installcheck dvi: do-dvi install-info: install-info-dirs do-install-info dir.info if [ -f dir.info ] ; then \ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \ else true ; fi do-install-info: install-info-dirs local-clean: -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E local-distclean: -rm -f Makefile config.status clean: do-clean local-clean mostlyclean: do-mostlyclean local-clean distclean: do-distclean local-clean local-distclean realclean: do-realclean local-clean local-distclean # Check target. .PHONY: check check: $(CHECK_MODULES) \ $(CHECK_TARGET_MODULES) \ $(CHECK_X11_MODULES) \ check-gcc # Installation targets. .PHONY: install uninstall vault-install install: $(INSTALL_TARGET) uninstall: @echo "the uninstall target is not supported in this tree" vault-install: @if [ -f ./release/vault-install ] ; then \ ./release/vault-install $(host_alias) $(target_alias) ; \ fi .PHONY: install.all install.all: install-no-fixedincludes @if [ -f ./gcc/Makefile ] ; then \ rootme=`pwd` ; export rootme ; \ (cd ./gcc; \ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ else \ true ; \ fi # install-no-fixedincludes is used because Cygnus can not distributed # the fixed header files. .PHONY: install-no-fixedincludes install-no-fixedincludes: \ install-dirs \ gcc-no-fixedincludes \ $(INSTALL_MODULES) \ $(INSTALL_TARGET_MODULES) \ $(INSTALL_X11_MODULES) # Install the gcc headers files, but not the fixed include files, # which Cygnus is not allowed to distribute. This rule is very # dependent on the workings of the gcc Makefile.in. .PHONY: gcc-no-fixedincludes gcc-no-fixedincludes: @if [ -f ./gcc/Makefile ]; then \ rm -rf gcc/tmp-include; \ mv gcc/include gcc/tmp-include 2>/dev/null; \ mkdir gcc/include; \ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \ touch gcc/stmp-fixinc; \ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd` ; export srcroot; \ (cd ./gcc; \ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ rm -rf gcc/include; \ mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi .PHONY: install.cross install.cross: \ install-dirs \ install-binutils \ install-byacc \ install-dejagnu \ install-etc \ install-flex \ install-gas \ install-gcc \ install-gdb \ install-glob \ install-ld \ install-libiberty \ install-mmalloc \ install-opcodes \ install-readline \ $(INSTALL_TARGET_MODULES) # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. # all-glob is handled specially because it doesn't actually build. .PHONY: $(ALL_MODULES) all-glob $(ALL_MODULES) all-glob: @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \ else \ true; \ fi # This rule is used to check the modules which use FLAGS_TO_PASS. To # build a target check-X means to cd to X and make all. .PHONY: $(CHECK_MODULES) $(CHECK_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ else \ true; \ fi # This rule is used to install the modules which use FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: $(INSTALL_MODULES) $(INSTALL_MODULES): install-dirs @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ else \ true; \ fi # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_TARGET_MODULES) $(ALL_TARGET_MODULES): @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: $(CHECK_TARGET_MODULES) $(CHECK_TARGET_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \ else \ true; \ fi # This rule is used to install the modules which use # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X # and make install. .PHONY: $(INSTALL_TARGET_MODULES) $(INSTALL_TARGET_MODULES): install-dirs @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ else \ true; \ fi # This rule is used to build the modules which use X11_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_X11_MODULES) $(ALL_X11_MODULES): @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \ else \ true; \ fi # This rule is used to check the modules which use X11_FLAGS_TO_PASS. # To build a target check-X means to cd to X and make all. .PHONY: $(CHECK_X11_MODULES) $(CHECK_X11_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \ else \ true; \ fi # This rule is used to install the modules which use X11_FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: $(INSTALL_X11_MODULES) $(INSTALL_X11_MODULES): @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \ else \ true; \ fi # gcc is the only module which uses GCC_FLAGS_TO_PASS. .PHONY: all-gcc all-gcc: @if [ -f ./gcc/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \ else \ true; \ fi .PHONY: check-gcc check-gcc: @if [ -f ./gcc/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \ else \ true; \ fi .PHONY: install-gcc install-gcc: @if [ -f ./gcc/Makefile ] ; then \ rootme=`pwd`; export rootme; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ else \ true; \ fi # This is a list of inter-dependencies among modules. all-autoconf: all-bfd: all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc: # start-sanitize-chill all-chillrt: all-binutils all-gas all-gcc all-newlib # end-sanitize-chill all-cvs: all-dejagnu: all-diff: all-libiberty all-emacs: all-etc: all-expect: all-tcl all-fileutils: all-libiberty all-find: all-flex: all-libiberty all-byacc all-gas: all-libiberty all-opcodes all-bfd all-gawk: all-gcc: all-libiberty all-byacc all-binutils all-gas all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-glob: all-gprof: all-libiberty all-bfd all-grep: all-gzip: all-libiberty all-hello: all-libiberty all-indent: all-ispell: all-emacs all-ld: all-libiberty all-bfd all-byacc all-flex all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib all-libiberty: all-m4: all-libiberty all-make: all-libiberty all-mmalloc: all-newlib: all-binutils all-gas all-gcc all-opcodes: all-bfd all-patch: all-prms: all-rcs: all-readline: all-recode: all-libiberty all-sed: all-send-pr: all-shellutils: all-sim: all-libiberty all-bfd all-tar: all-libiberty all-tcl: all-tclX: all-tcl all-tk all-tk: all-tcl all-texinfo: all-libiberty all-textutils: all-tgas: all-libiberty all-bfd all-time: all-wdiff: all-uudecode: all-libiberty all-xiberty: all-gcc all-newlib ### other supporting targets MAKEDIRS= \ $(prefix) \ $(exec_prefix) \ $(tooldir) .PHONY: install-dirs install-dirs: @for i in $(MAKEDIRS) ; do \ echo Making $$i... ; \ parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \ if [ ! -d $$i ] ; then \ if mkdir $$i ; then \ true ; \ else \ exit 1 ; \ fi ; \ else \ true ; \ fi ; \ done .PHONY: install-info-dirs install-info-dirs: if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi dir.info: do-install-info if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \ mv -f dir.info.new dir.info ; \ else true ; \ fi dist: @echo "Building a full distribution of this tree isn't done" @echo "via 'make dist'. Check out the etc/ subdirectory" etags tags: TAGS TAGS: etags `$(MAKE) ls` ls: @echo Makefile @for i in $(SUBDIRS); \ do \ (cd $$i; \ pwd=`pwd`; \ wd=`basename $$pwd`; \ for j in `$(MAKE) ls`; \ do \ echo $$wd/$$j; \ done) \ done # with the gnu make, this is done automatically. Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) $(SHELL) ./config.status # # Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc DEVO_SUPPORT= README Makefile.in configure configure.in \ config.guess config.sub config move-if-change ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \ configure.texi standards.texi make-stds.texi GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS) .PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z setup-dirs-gdb: ./configure sun4 $(MAKE) clean ./configure -rm sun4 chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print` gdb.tar.Z: setup-dirs-gdb (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc") (cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir) $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex rm -rf proto-toplev; mkdir proto-toplev ln -s ../gdb/proto-gdb.dir proto-toplev/gdb (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \ ln -s ../$$i . ; \ done) mkdir proto-toplev/etc (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \ ln -s ../../etc/$$i . ; \ done) # Put only one copy (four hard links) of COPYING in the tar file. rm proto-toplev/bfd/COPYING ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING rm proto-toplev/include/COPYING ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING rm proto-toplev/readline/COPYING ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING # Take out texinfo and glob from configurable dirs rm proto-toplev/configure.in sed -e '/^host_tools=/s/texinfo //' \ -e '/^host_libs=/s/glob //' \ proto-toplev/configure.in # Take out texinfo from a few places; make simple BISON=bison line. rm proto-toplev/Makefile.in sed -e '/^all\.normal: /s/\all-texinfo //' \ -e '/^ install-texinfo /d' \ -e '/^BISON = /,/^$$/d' \ -e '/^# BISON:/s/.*/BISON = bison -y/' \ proto-toplev/Makefile.in mkdir proto-toplev/texinfo ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/ chmod og=u `find proto-toplev -print` (VER=`sed Making gdb-$$VER.tar.Z"; \ tar cfh - gdb-$$VER | $(COMPRESS) -v >gdb-$$VER.tar.Z; \ echo "==> Making gdb-$$VER.tar.z"; \ tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.z) # Make the testsuite archive separately. ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite # Blow away the Chill test that requires a Chill compiled executable, # since GNU Chill is not yet publically available. rm -rf proto-toplev/gdb/testsuite/gdb.t31 # Put a copy of COPYING in the tar file. ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING chmod og=u `find proto-toplev/gdb/testsuite -print` (VER=`sed Making gdb-$$VER-testsuite.tar.Z"; \ tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \ gdb-$$VER/config.sub gdb-$$VER/move-if-change \ gdb-$$VER/gdb/testsuite | \ $(COMPRESS) -v >gdb-$$VER-testsuite.tar.Z; \ echo "==> Making gdb-$$VER-testsuite.tar.z"; \ tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \ gdb-$$VER/config.sub gdb-$$VER/move-if-change \ gdb-$$VER/gdb/testsuite | \ $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.z) # When you use `make setup-dirs' or `make taz' you should always redefine # this macro. SUPPORT_FILES = list-of-support-files-for-tool-in-question # Directories that might want `make diststuff' run. DISTSTUFFDIRS= ld gprof gdb .PHONY: taz taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo ./configure sun4 $(MAKE) clean ./configure -rm sun4 chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL) -print` # Make links, and run "make diststuff" when needed. # The `echo' for setting `p' is to convert all whitespace to spaces. # Then the `case' further below should tell whether $$d is in # DISTSTUFFDIRS. rm -rf proto-toplev ; mkdir proto-toplev set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \ p=" `echo $(DISTSTUFFDIRS)` " ; \ for d in $$dirs ; do \ if [ -d $$d ]; then \ case " $$p " in \ *" $$d "*) \ echo making diststuff in $$d ; \ (cd $$d ; $(MAKE) -f Makefile.in diststuff) || exit 1 ;; \ esac ; \ if [ -d $$d/proto-$$d.dir ]; then \ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \ else \ ln -s ../$$d proto-toplev/$$d ; \ fi ; \ else ln -s ../$$d proto-toplev/$$d ; fi ; \ done # mkdir proto-toplev/etc (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \ ln -s ../../etc/$$i . ; \ done) # # Take out texinfo and glob from configurable dirs rm proto-toplev/configure.in sed -e '/^host_tools=/s/texinfo //' \ -e '/^host_libs=/s/glob //' \ proto-toplev/configure.in # # Take out texinfo from a few places; make simple BISON=bison line. rm proto-toplev/Makefile.in sed -e '/^all\.normal: /s/\all-texinfo //' \ -e '/^ install-texinfo /d' \ -e '/^BISON = /,/^$$/d' \ -e '/^# BISON:/s/.*/BISON = bison -y/' \ proto-toplev/Makefile.in # mkdir proto-toplev/texinfo ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/ chmod og=u `find proto-toplev -print` (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \ echo "==> Making $(TOOL)-$$VER.tar.z"; \ ln -s proto-toplev $(TOOL)-$$VER; \ tar cfh - $(TOOL)-$$VER \ | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.z) TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT) .PHONY: gas.tar.z GAS_SUPPORT_DIRS= bfd include libiberty opcodes gas.tar.z: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas # The FSF "binutils" release includes gprof and ld. .PHONY: binutils.tar.z BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof binutils.tar.z: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" TOOL=binutils .PHONY: gas+binutils.tar.z GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof gas+binutils.tar.z: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas .NOEXPORT: MAKEOVERRIDES= # start-sanitize-chill ## This is ugly, but I don't want GNU make to put these variables in ## the environment. Older makes will see this as a set of targets ## with no dependencies and no actions. unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET : # end-sanitize-chill # end of Makefile.in