The guidelines in this file are the ideals; it's better to send a not-fully-following-guidelines patch than no patch at all, though. We can always polish it up. Mailing list === The D-Bus mailing list is dbus@lists.freedesktop.org; discussion of patches, etc. should go there. Security === Most of D-Bus is security sensitive. Guidelines related to that: - avoid memcpy(), sprintf(), strlen(), snprintf, strlcat(), strstr(), strtok(), or any of this stuff. Use DBusString. If DBusString doesn't have the feature you need, add it to DBusString. There are some exceptions, for example if your strings are just used to index a hash table and you don't do any parsing/modification of them, perhaps DBusString is wasteful and wouldn't help much. But definitely if you're doing any parsing, reallocation, etc. use DBusString. - do not include system headers outside of dbus-memory.c, dbus-sysdeps.c, and other places where they are already included. This gives us one place to audit all external dependencies on features in libc, etc. - do not use libc features that are "complicated" and may contain security holes. For example, you probably shouldn't try to use regcomp() to compile an untrusted regular expression. Regular expressions are just too complicated, and there are many different libc's out there. - we need to design the message bus daemon (and any similar features) to use limited privileges, run in a chroot jail, and so on. http://vsftpd.beasts.org/ has other good security suggestions. Coding Style === - The C library uses GNU coding conventions, with GLib-like extensions (e.g. lining up function arguments). The Qt wrapper uses KDE coding conventions. - Write docs for all non-static functions and structs and so on. try "doxygen Doxyfile" prior to commit and be sure there are no warnings printed. - All external interfaces (network protocols, file formats, etc.) should have documented specifications sufficient to allow an alternative implementation to be written. Our implementation should be strict about specification compliance (should not for example heuristically parse a file and accept not-well-formed data). Avoiding heuristics is also important for security reasons; if it looks funny, ignore it (or exit, or disconnect). Development === D-Bus uses Git as its version control system. The main repository is hosted at git.freedesktop.org/dbus/dbus. To clone D-Bus, execute the following command: git clone git://git.freedesktop.org/dbus/dbus OR git clone git.freedesktop.org:dbus/dbus The latter form is the one that allows pushing, but it also requires an SSH account on the server. The former form allows anonymous checkouts. D-Bus development happens in two branches in parallel: the current stable branch, with an even minor number (like 1.0, 1.2 and 1.4), and the next development branch, with the next odd number. The stable branch is named after the version number itself (dbus-1.2, dbus-1.4), whereas the development branch is simply known as "master". When making a change to D-Bus, do the following: - check out the earliest branch of D-Bus that makes sense to have your change in. If it's a bugfix, it's normally the current stable branch; if it's a feature, it's normally the "master" branch. If you have an important security fix, you may want to apply to older branches too. - for large changes: if you're developing a new, large feature, it's recommended to create a new branch and do your development there. Publish your branch at a suitable place and ask others to help you develop and test it. Once your feature is considered finalised, you may merge it into the "master" branch. - for small changes: . make your change to the source code . execute tests to guarantee that you're not introducing a regression. For that, execute: make check (if possible, add a new test to check the fix you're introducing) . commit your change using "git commit" in the commit message, write a short sentence describing what you did in the first line. Then write a longer description in the next paragraph(s). . repeat the previous steps if necessary to have multiple commits - extract your patches and send to the D-Bus mailing list for review or post them to the D-Bus Bugzilla, attaching them to a bug report. To extract the patches, execute: git format-patch origin/master - once your code has been reviewed, you may push it to the Git server: git push origin my-branch:remote OR git push origin dbus-X.Y OR git push origin master (consult the Git manual to know which command applies) - (Optional) if you've not worked on "master", merge your changes to that branch. If you've worked on an earlier branch than the current stable, merge your changes upwards towards the stable branch, then from there into "master". . execute: git checkout master . ensure that you have the latest "master" from the server, update if you don't . execute: git merge dbus-X.Y . if you have any conflicts, resolve them, git add the conflicted files and then git commit . push the "master" branch to the server as well Executing this merge is recommended, but not necessary for all changes. You should do this step if your bugfix is critical for the development in "master", or if you suspect that conflicts will arise (you're usually the best person to resolve conflicts introduced by your own code), or if it has been too long since the last merge. Making a release === To make a release of D-Bus, do the following: - check out a fresh copy from Git - verify that the libtool versioning/library soname is changed if it needs to be, or not changed if not - update the file NEWS based on the ChangeLog - update the AUTHORS file based on the ChangeLog - add a ChangeLog entry containing the version number you're releasing ("Released 0.3" or something) so people can see which changes were before and after a given release - the version number should have major.minor.micro even if micro is 0, i.e. "1.0.0" and "1.2.0" not "1.0"/"1.2" - "make distcheck" (DO NOT just "make dist" - pass the check!) - if make distcheck fails, fix it. - once distcheck succeeds, "git commit -a". This is the version of the tree that corresponds exactly to the released tarball. - tag the tree with "git tag -s -m 'Released X.Y.Z' dbus-X.Y.Z" where X.Y.Z is the version of the release. If you can't sign then simply created an unsigned annotated tag: "git tag -a -m 'Released X.Y.Z' dbus-X.Y.Z". - bump the version number up in configure.in, and commit it. Make sure you do this *after* tagging the previous release! The idea is that git has a newer version number than anything released. - merge the branch you've released to the chronologically-later branch (usually "master"). You'll probably have to fix a merge conflict in configure.in (the version number). - push your changes and the tag to the central repository with git push origin master dbus-X.Y dbus-X.Y.Z - scp your tarball to freedesktop.org server and copy it to dbus.freedesktop.org:/srv/dbus.freedesktop.org/www/releases/dbus/dbus-X.Y.Z.tar.gz. This should be possible if you're in group "dbus" - Update the online documentation with `make -C doc maintainer-upload-docs`. - update the wiki page http://www.freedesktop.org/Software/dbus by adding the new release under the Download heading. Then, cut the link and changelog for the previous that was there. - update the wiki page http://www.freedesktop.org/Software/DbusReleaseArchive pasting the previous release. Note that bullet points for each of the changelog items must be indented three more spaces to conform to the formatting of the other releases there. - post to dbus@lists.freedesktop.org announcing the release. After making a ".0" stable release === After releasing, when you increment the version number in git, also move the ChangeLog to ChangeLog.pre-X-Y where X-Y is what you just released, e.g. ChangeLog.pre-1-0. Then create and cvs add a new empty ChangeLog. The last entry in ChangeLog.pre-1-0 should be the one about "Released 1.0". Add ChangeLog.pre-X-Y to EXTRA_DIST in Makefile.am. We create a branch for each stable release; sometimes the branch is not done immediately, instead it's possible to wait until someone has a not-suitable-for-stable change they want to make and then branch to allow committing that change. The branch name should be dbus-X.Y-branch which is a branch that has releases versioned X.Y.Z To branch: git branch dbus-X.Y-branch and upload the branch tag to the server: git-push origin dbus-X.Y-branch To develop in this branch: git-checkout dbus-X.Y-branch Environment variables === These are the environment variables that are used by the D-Bus client library DBUS_VERBOSE=1 Turns on printing verbose messages. This only works if D-Bus has been compiled with --enable-verbose-mode DBUS_MALLOC_FAIL_NTH=n Can be set to a number, causing every nth call to dbus_alloc or dbus_realloc to fail. This only works if D-Bus has been compiled with --enable-tests. DBUS_MALLOC_FAIL_GREATER_THAN=n Can be set to a number, causing every call to dbus_alloc or dbus_realloc to fail if the number of bytes to be allocated is greater than the specified number. This only works if D-Bus has been compiled with --enable-tests. DBUS_TEST_MALLOC_FAILURES=n Many of the D-Bus tests will run over and over, once for each malloc involved in the test. Each run will fail a different malloc, plus some number of mallocs following that malloc (because a fair number of bugs only happen if two or more mallocs fail in a row, e.g. error recovery that itself involves malloc). This env variable sets the number of mallocs to fail. Here's why you care: If set to 0, then the malloc checking is skipped, which makes the test suite a heck of a lot faster. Just run with this env variable unset before you commit. Tests === These are the test programs that are built if dbus is compiled using --enable-tests. dbus/dbus-test This is the main unit test program that tests all aspects of the D-Bus client library. dbus/bus-test This it the unit test program for the message bus. test/break-loader A test that tries to break the message loader by passing it randomly created invalid messages. test/name-test/* This is a suite of programs which are run with a temporary session bus. If your test involves multiple processes communicating, your best bet is to add a test in here. "make check" runs all the deterministic test programs (i.e. not break-loader). "make check-coverage" is available if you configure with --enable-gcov and gives a complete report on test suite coverage. You can also run "test/decode-gcov foo.c" on any source file to get annotated source, after running make check with a gcov-enabled tree. Patches === Please file them at http://bugzilla.freedesktop.org under component dbus, and also post to the mailing list for discussion. The commit rules are: - for fixes that don't affect API or protocol, they can be committed if any one qualified reviewer other than patch author reviews and approves - for fixes that do affect API or protocol, two people in the reviewer group have to review and approve the commit, and posting to the list is definitely mandatory - if there's a live unresolved controversy about a change, don't commit it while the argument is still raging. - regardless of reviews, to commit a patch: - make check must pass - the test suite must be extended to cover the new code as much as reasonably feasible (see Tests above) - the patch has to follow the portability, security, and style guidelines - the patch should as much as reasonable do one thing, not many unrelated changes No reviewer should approve a patch without these attributes, and failure on these points is grounds for reverting the patch. The reviewer group that can approve patches: Havoc Pennington Michael Meeks Alexander Larsson Zack Rusin Joe Shaw Mikael Hallendal Richard Hult Owen Fraser-Green Olivier Andrieu Colin Walters Thiago Macieira John Palmieri Scott James Remnant Will Thompson Simon McVittie