2 * (C) Copyright 2015 Google, Inc
3 * Written by Simon Glass <sjg@chromium.org>
5 * SPDX-License-Identifier: GPL-2.0+
13 RK_INIT_SIZE_ALIGN = 2048,
15 RK_MAX_BOOT_SIZE = 512 << 10,
16 RK_SPL_HDR_START = RK_INIT_OFFSET * RK_BLK_SIZE,
18 RK_SPL_START = RK_SPL_HDR_START + RK_SPL_HDR_SIZE,
19 RK_IMAGE_HEADER_LEN = RK_SPL_START,
23 * rkcommon_check_params() - check params
25 * @return 0 if OK, -1 if ERROR.
27 int rkcommon_check_params(struct image_tool_params *params);
30 * rkcommon_get_spl_hdr() - get 4-bytes spl hdr for a Rockchip boot image
32 * Rockchip's bootrom requires the spl loader to start with a 4-bytes
33 * header. The content of this header depends on the chip type.
35 const char *rkcommon_get_spl_hdr(struct image_tool_params *params);
38 * rkcommon_get_spl_size() - get spl size for a Rockchip boot image
40 * Different chip may have different sram size. And if we want to jump
41 * back to the bootrom after spl, we may need to reserve some sram space
43 * The spl loader size should be sram size minus reserved size(if needed)
45 int rkcommon_get_spl_size(struct image_tool_params *params);
48 * rkcommon_set_header() - set up the header for a Rockchip boot image
50 * This sets up a 2KB header which can be interpreted by the Rockchip boot ROM.
52 * @buf: Pointer to header place (must be at least 2KB in size)
53 * @file_size: Size of the file we want the boot ROM to load, in bytes
54 * @return 0 if OK, -ENOSPC if too large
56 int rkcommon_set_header(void *buf, uint file_size,
57 struct image_tool_params *params);
60 * rkcommon_verify_header() - verify the header for a Rockchip boot image
62 * @buf: Pointer to the image file
63 * @file_size: Size of entire bootable image file (incl. all padding)
66 int rkcommon_verify_header(unsigned char *buf, int size,
67 struct image_tool_params *params);
70 * rkcommon_print_header() - print the header for a Rockchip boot image
72 * This prints the header, spl_name and whether this is a SD/MMC or SPI image.
74 * @buf: Pointer to the image (can be a read-only file-mapping)
76 void rkcommon_print_header(const void *buf);
79 * rkcommon_need_rc4_spl() - check if rc4 encoded spl is required
81 * Some socs cannot disable the rc4-encryption of the spl binary.
82 * rc4 encryption is disabled normally except on socs that cannot
83 * handle unencrypted binaries.
84 * @return true or false depending on rc4 being required.
86 bool rkcommon_need_rc4_spl(struct image_tool_params *params);
89 * rkcommon_rc4_encode_spl() - encode the spl binary
91 * Encrypts the SPL binary using the generic rc4 key as required
94 * @buf: Pointer to the SPL data (header and SPL binary)
95 * @offset: offset inside buf to start at
96 * @size: number of bytes to encode
98 void rkcommon_rc4_encode_spl(void *buf, unsigned int offset, unsigned int size);
101 * rkcommon_vrec_header() - allocate memory for the header
103 * @params: Pointer to the tool params structure
104 * @tparams: Pointer tot the image type structure (for setting
105 * the header and header_size)
106 * @alignment: Alignment (a power of two) that the image should be
107 * padded to (e.g. 512 if we want to align with SD/MMC
108 * blocksizes or 2048 for the SPI format)
110 * @return bytes of padding required/added (does not include the header_size)
112 int rkcommon_vrec_header(struct image_tool_params *params,
113 struct image_type_params *tparams,
114 unsigned int alignment);