tools/kwboot.c

   1 /*
   2  * Boot a Marvell SoC, with Xmodem over UART0.
   3  *  supports Kirkwood, Dove, Armada 370, Armada XP, Armada 375, Armada 38x and
   4  *           Armada 39x
   5  *
   6  * (c) 2012 Daniel Stodden <daniel.stodden@gmail.com>
   7  * (c) 2021 Pali Rohár <pali@kernel.org>
   8  * (c) 2021 Marek Behún <marek.behun@nic.cz>
   9  *
  10  * References: marvell.com, "88F6180, 88F6190, 88F6192, and 88F6281
  11  *   Integrated Controller: Functional Specifications" December 2,
  12  *   2008. Chapter 24.2 "BootROM Firmware".
  13  */
  14
  15 #include "kwbimage.h"
  16 #include "mkimage.h"
  17 #include "version.h"
  18
  19 #include <stdlib.h>
  20 #include <stdio.h>
  21 #include <string.h>
  22 #include <stdarg.h>
  23 #include <image.h>
  24 #include <libgen.h>
  25 #include <fcntl.h>
  26 #include <errno.h>
  27 #include <unistd.h>
  28 #include <stdint.h>
  29 #include <time.h>
  30 #include <sys/stat.h>
  31
  32 #ifdef __linux__
  33 #include "termios_linux.h"
  34 #else
  35 #include <termios.h>
  36 #endif
  37
  38 /*
  39  * Marvell BootROM UART Sensing
  40  */
  41
  42 static unsigned char kwboot_msg_boot[] = {
  43         0xBB, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77
  44 };
  45
  46 static unsigned char kwboot_msg_debug[] = {
  47         0xDD, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77
  48 };
  49
  50 /* Defines known to work on Kirkwood */
  51 #define KWBOOT_MSG_REQ_DELAY    10 /* ms */
  52 #define KWBOOT_MSG_RSP_TIMEO    50 /* ms */
  53
  54 /* Defines known to work on Armada XP */
  55 #define KWBOOT_MSG_REQ_DELAY_AXP        1000 /* ms */
  56 #define KWBOOT_MSG_RSP_TIMEO_AXP        1000 /* ms */
  57
  58 /*
  59  * Xmodem Transfers
  60  */
  61
  62 #define SOH     1       /* sender start of block header */
  63 #define EOT     4       /* sender end of block transfer */
  64 #define ACK     6       /* target block ack */
  65 #define NAK     21      /* target block negative ack */
  66 #define CAN     24      /* target/sender transfer cancellation */
  67
  68 #define KWBOOT_XM_BLKSZ 128 /* xmodem block size */
  69
  70 struct kwboot_block {
  71         uint8_t soh;
  72         uint8_t pnum;
  73         uint8_t _pnum;
  74         uint8_t data[KWBOOT_XM_BLKSZ];
  75         uint8_t csum;
  76 } __packed;
  77
  78 #define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */
  79 #define KWBOOT_HDR_RSP_TIMEO 10000 /* ms */
  80
  81 /* ARM code making baudrate changing function return to original exec address */
  82 static unsigned char kwboot_pre_baud_code[] = {
  83                                 /* exec_addr:                                 */
  84         0x00, 0x00, 0x00, 0x00, /* .word 0                                    */
  85         0x0c, 0xe0, 0x1f, 0xe5, /* ldr lr, exec_addr                          */
  86 };
  87
  88 /* ARM code for binary header injection to change baudrate */
  89 static unsigned char kwboot_baud_code[] = {
  90                                 /* ; #define UART_BASE 0xd0012000             */
  91                                 /* ; #define THR       0x00                   */
  92                                 /* ; #define DLL       0x00                   */
  93                                 /* ; #define DLH       0x04                   */
  94                                 /* ; #define LCR       0x0c                   */
  95                                 /* ; #define   DLAB    0x80                   */
  96                                 /* ; #define LSR       0x14                   */
  97                                 /* ; #define   THRE    0x20                   */
  98                                 /* ; #define   TEMT    0x40                   */
  99                                 /* ; #define DIV_ROUND(a, b) ((a + b/2) / b)  */
 100                                 /* ;                                          */
 101                                 /* ; u32 set_baudrate(u32 old_b, u32 new_b) { */
 102                                 /* ;   const u8 *str = "$baudratechange";     */
 103                                 /* ;   u8 c;                                  */
 104                                 /* ;   do {                                   */
 105                                 /* ;       c = *str++;                        */
 106                                 /* ;       writel(UART_BASE + THR, c);        */
 107                                 /* ;   } while (c);                           */
 108                                 /* ;   while                                  */
 109                                 /* ;      (!(readl(UART_BASE + LSR) & TEMT)); */
 110                                 /* ;   u32 lcr = readl(UART_BASE + LCR);      */
 111                                 /* ;   writel(UART_BASE + LCR, lcr | DLAB);   */
 112                                 /* ;   u8 old_dll = readl(UART_BASE + DLL);   */
 113                                 /* ;   u8 old_dlh = readl(UART_BASE + DLH);   */
 114                                 /* ;   u16 old_dl = old_dll | (old_dlh << 8); */
 115                                 /* ;   u32 clk = old_b * old_dl;              */
 116                                 /* ;   u16 new_dl = DIV_ROUND(clk, new_b);    */
 117                                 /* ;   u8 new_dll = new_dl & 0xff;            */
 118                                 /* ;   u8 new_dlh = (new_dl >> 8) & 0xff;     */
 119                                 /* ;   writel(UART_BASE + DLL, new_dll);      */
 120                                 /* ;   writel(UART_BASE + DLH, new_dlh);      */
 121                                 /* ;   writel(UART_BASE + LCR, lcr & ~DLAB);  */
 122                                 /* ;   msleep(1);                             */
 123                                 /* ;   return 0;                              */
 124                                 /* ; }                                        */
 125
 126         0xfe, 0x5f, 0x2d, 0xe9, /* push  { r1 - r12, lr }                     */
 127
 128                                 /*  ; r0 = UART_BASE                          */
 129         0x02, 0x0a, 0xa0, 0xe3, /* mov   r0, #0x2000                          */
 130         0x01, 0x00, 0x4d, 0xe3, /* movt  r0, #0xd001                          */
 131
 132                                 /*  ; r2 = address of preamble string         */
 133         0xd0, 0x20, 0x8f, 0xe2, /* adr   r2, preamble                         */
 134
 135                                 /*  ; Send preamble string over UART          */
 136                                 /* .Lloop_preamble:                           */
 137                                 /*                                            */
 138                                 /*  ; Wait until Transmitter Holding is Empty */
 139                                 /* .Lloop_thre:                               */
 140                                 /*  ; r1 = UART_BASE[LSR] & THRE              */
 141         0x14, 0x10, 0x90, 0xe5, /* ldr   r1, [r0, #0x14]                      */
 142         0x20, 0x00, 0x11, 0xe3, /* tst   r1, #0x20                            */
 143         0xfc, 0xff, 0xff, 0x0a, /* beq   .Lloop_thre                          */
 144
 145                                 /*  ; Put character into Transmitter FIFO     */
 146                                 /*  ; r1 = *r2++                              */
 147         0x01, 0x10, 0xd2, 0xe4, /* ldrb  r1, [r2], #1                         */
 148                                 /*  ; UART_BASE[THR] = r1                     */
 149         0x00, 0x10, 0x80, 0xe5, /* str   r1, [r0, #0x0]                       */
 150
 151                                 /*  ; Loop until end of preamble string       */
 152         0x00, 0x00, 0x51, 0xe3, /* cmp   r1, #0                               */
 153         0xf8, 0xff, 0xff, 0x1a, /* bne   .Lloop_preamble                      */
 154
 155                                 /*  ; Wait until Transmitter FIFO is Empty    */
 156                                 /* .Lloop_txempty:                            */
 157                                 /*  ; r1 = UART_BASE[LSR] & TEMT              */
 158         0x14, 0x10, 0x90, 0xe5, /* ldr   r1, [r0, #0x14]                      */
 159         0x40, 0x00, 0x11, 0xe3, /* tst   r1, #0x40                            */
 160         0xfc, 0xff, 0xff, 0x0a, /* beq   .Lloop_txempty                       */
 161
 162                                 /*  ; Set Divisor Latch Access Bit            */
 163                                 /*  ; UART_BASE[LCR] |= DLAB                  */
 164         0x0c, 0x10, 0x90, 0xe5, /* ldr   r1, [r0, #0x0c]                      */
 165         0x80, 0x10, 0x81, 0xe3, /* orr   r1, r1, #0x80                        */
 166         0x0c, 0x10, 0x80, 0xe5, /* str   r1, [r0, #0x0c]                      */
 167
 168                                 /*  ; Read current Divisor Latch              */
 169                                 /*  ; r1 = UART_BASE[DLH]<<8 | UART_BASE[DLL] */
 170         0x00, 0x10, 0x90, 0xe5, /* ldr   r1, [r0, #0x00]                      */
 171         0xff, 0x10, 0x01, 0xe2, /* and   r1, r1, #0xff                        */
 172         0x01, 0x20, 0xa0, 0xe1, /* mov   r2, r1                               */
 173         0x04, 0x10, 0x90, 0xe5, /* ldr   r1, [r0, #0x04]                      */
 174         0xff, 0x10, 0x01, 0xe2, /* and   r1, r1, #0xff                        */
 175         0x41, 0x14, 0xa0, 0xe1, /* asr   r1, r1, #8                           */
 176         0x02, 0x10, 0x81, 0xe1, /* orr   r1, r1, r2                           */
 177
 178                                 /*  ; Read old baudrate value                 */
 179                                 /*  ; r2 = old_baudrate                       */
 180         0x8c, 0x20, 0x9f, 0xe5, /* ldr   r2, old_baudrate                     */
 181
 182                                 /*  ; Calculate base clock                    */
 183                                 /*  ; r1 = r2 * r1                            */
 184         0x92, 0x01, 0x01, 0xe0, /* mul   r1, r2, r1                           */
 185
 186                                 /*  ; Read new baudrate value                 */
 187                                 /*  ; r2 = baudrate                           */
 188         0x88, 0x20, 0x9f, 0xe5, /* ldr   r2, baudrate                         */
 189
 190                                 /*  ; Calculate new Divisor Latch             */
 191                                 /*  ; r1 = DIV_ROUND(r1, r2) =                */
 192                                 /*  ;    = (r1 + r2/2) / r2                   */
 193         0xa2, 0x10, 0x81, 0xe0, /* add   r1, r1, r2, lsr #1                   */
 194         0x02, 0x40, 0xa0, 0xe1, /* mov   r4, r2                               */
 195         0xa1, 0x00, 0x54, 0xe1, /* cmp   r4, r1, lsr #1                       */
 196                                 /* .Lloop_div1:                               */
 197         0x84, 0x40, 0xa0, 0x91, /* movls r4, r4, lsl #1                       */
 198         0xa1, 0x00, 0x54, 0xe1, /* cmp   r4, r1, lsr #1                       */
 199         0xfc, 0xff, 0xff, 0x9a, /* bls   .Lloop_div1                          */
 200         0x00, 0x30, 0xa0, 0xe3, /* mov   r3, #0                               */
 201                                 /* .Lloop_div2:                               */
 202         0x04, 0x00, 0x51, 0xe1, /* cmp   r1, r4                               */
 203         0x04, 0x10, 0x41, 0x20, /* subhs r1, r1, r4                           */
 204         0x03, 0x30, 0xa3, 0xe0, /* adc   r3, r3, r3                           */
 205         0xa4, 0x40, 0xa0, 0xe1, /* mov   r4, r4, lsr #1                       */
 206         0x02, 0x00, 0x54, 0xe1, /* cmp   r4, r2                               */
 207         0xf9, 0xff, 0xff, 0x2a, /* bhs   .Lloop_div2                          */
 208         0x03, 0x10, 0xa0, 0xe1, /* mov   r1, r3                               */
 209
 210                                 /*  ; Set new Divisor Latch Low               */
 211                                 /*  ; UART_BASE[DLL] = r1 & 0xff              */
 212         0x01, 0x20, 0xa0, 0xe1, /* mov   r2, r1                               */
 213         0xff, 0x20, 0x02, 0xe2, /* and   r2, r2, #0xff                        */
 214         0x00, 0x20, 0x80, 0xe5, /* str   r2, [r0, #0x00]                      */
 215
 216                                 /*  ; Set new Divisor Latch High              */
 217                                 /*  ; UART_BASE[DLH] = r1>>8 & 0xff           */
 218         0x41, 0x24, 0xa0, 0xe1, /* asr   r2, r1, #8                           */
 219         0xff, 0x20, 0x02, 0xe2, /* and   r2, r2, #0xff                        */
 220         0x04, 0x20, 0x80, 0xe5, /* str   r2, [r0, #0x04]                      */
 221
 222                                 /*  ; Clear Divisor Latch Access Bit          */
 223                                 /*  ; UART_BASE[LCR] &= ~DLAB                 */
 224         0x0c, 0x10, 0x90, 0xe5, /* ldr   r1, [r0, #0x0c]                      */
 225         0x80, 0x10, 0xc1, 0xe3, /* bic   r1, r1, #0x80                        */
 226         0x0c, 0x10, 0x80, 0xe5, /* str   r1, [r0, #0x0c]                      */
 227
 228                                 /*  ; Sleep 1ms ~~ 600000 cycles at 1200 MHz  */
 229                                 /*  ; r1 = 600000                             */
 230         0x9f, 0x1d, 0xa0, 0xe3, /* mov   r1, #0x27c0                          */
 231         0x09, 0x10, 0x40, 0xe3, /* movt  r1, #0x0009                          */
 232                                 /* .Lloop_sleep:                              */
 233         0x01, 0x10, 0x41, 0xe2, /* sub   r1, r1, #1                           */
 234         0x00, 0x00, 0x51, 0xe3, /* cmp   r1, #0                               */
 235         0xfc, 0xff, 0xff, 0x1a, /* bne   .Lloop_sleep                         */
 236
 237                                 /*  ; Return 0 - no error                     */
 238         0x00, 0x00, 0xa0, 0xe3, /* mov   r0, #0                               */
 239         0xfe, 0x9f, 0xbd, 0xe8, /* pop   { r1 - r12, pc }                     */
 240
 241                                 /*  ; Preamble string                         */
 242                                 /* preamble:                                  */
 243         0x24, 0x62, 0x61, 0x75, /* .asciz "$baudratechange"                   */
 244         0x64, 0x72, 0x61, 0x74,
 245         0x65, 0x63, 0x68, 0x61,
 246         0x6e, 0x67, 0x65, 0x00,
 247
 248                                 /*  ; Placeholder for old baudrate value      */
 249                                 /* old_baudrate:                              */
 250         0x00, 0x00, 0x00, 0x00, /* .word 0                                    */
 251
 252                                 /*  ; Placeholder for new baudrate value      */
 253                                 /* new_baudrate:                              */
 254         0x00, 0x00, 0x00, 0x00, /* .word 0                                    */
 255 };
 256
 257 #define KWBOOT_BAUDRATE_BIN_HEADER_SZ (sizeof(kwboot_baud_code) + \
 258                                        sizeof(struct opt_hdr_v1) + 8 + 16)
 259
 260 static const char kwb_baud_magic[16] = "$baudratechange";
 261
 262 static int kwboot_verbose;
 263
 264 static int msg_req_delay = KWBOOT_MSG_REQ_DELAY;
 265 static int msg_rsp_timeo = KWBOOT_MSG_RSP_TIMEO;
 266 static int blk_rsp_timeo = KWBOOT_BLK_RSP_TIMEO;
 267
 268 static ssize_t
 269 kwboot_write(int fd, const char *buf, size_t len)
 270 {
 271         size_t tot = 0;
 272
 273         while (tot < len) {
 274                 ssize_t wr = write(fd, buf + tot, len - tot);
 275
 276                 if (wr < 0)
 277                         return -1;
 278
 279                 tot += wr;
 280         }
 281
 282         return tot;
 283 }
 284
 285 static void
 286 kwboot_printv(const char *fmt, ...)
 287 {
 288         va_list ap;
 289
 290         if (kwboot_verbose) {
 291                 va_start(ap, fmt);
 292                 vprintf(fmt, ap);
 293                 va_end(ap);
 294                 fflush(stdout);
 295         }
 296 }
 297
 298 static void
 299 __spinner(void)
 300 {
 301         const char seq[] = { '-', '\\', '|', '/' };
 302         const int div = 8;
 303         static int state, bs;
 304
 305         if (state % div == 0) {
 306                 fputc(bs, stdout);
 307                 fputc(seq[state / div % sizeof(seq)], stdout);
 308                 fflush(stdout);
 309         }
 310
 311         bs = '\b';
 312         state++;
 313 }
 314
 315 static void
 316 kwboot_spinner(void)
 317 {
 318         if (kwboot_verbose)
 319                 __spinner();
 320 }
 321
 322 static void
 323 __progress(int pct, char c)
 324 {
 325         const int width = 70;
 326         static const char *nl = "";
 327         static int pos;
 328
 329         if (pos % width == 0)
 330                 printf("%s%3d %% [", nl, pct);
 331
 332         fputc(c, stdout);
 333
 334         nl = "]\n";
 335         pos = (pos + 1) % width;
 336
 337         if (pct == 100) {
 338                 while (pos && pos++ < width)
 339                         fputc(' ', stdout);
 340                 fputs(nl, stdout);
 341                 nl = "";
 342                 pos = 0;
 343         }
 344
 345         fflush(stdout);
 346
 347 }
 348
 349 static void
 350 kwboot_progress(int _pct, char c)
 351 {
 352         static int pct;
 353
 354         if (_pct != -1)
 355                 pct = _pct;
 356
 357         if (kwboot_verbose)
 358                 __progress(pct, c);
 359
 360         if (pct == 100)
 361                 pct = 0;
 362 }
 363
 364 static int
 365 kwboot_tty_recv(int fd, void *buf, size_t len, int timeo)
 366 {
 367         int rc, nfds;
 368         fd_set rfds;
 369         struct timeval tv;
 370         ssize_t n;
 371
 372         rc = -1;
 373
 374         FD_ZERO(&rfds);
 375         FD_SET(fd, &rfds);
 376
 377         tv.tv_sec = 0;
 378         tv.tv_usec = timeo * 1000;
 379         if (tv.tv_usec > 1000000) {
 380                 tv.tv_sec += tv.tv_usec / 1000000;
 381                 tv.tv_usec %= 1000000;
 382         }
 383
 384         do {
 385                 nfds = select(fd + 1, &rfds, NULL, NULL, &tv);
 386                 if (nfds < 0)
 387                         goto out;
 388                 if (!nfds) {
 389                         errno = ETIMEDOUT;
 390                         goto out;
 391                 }
 392
 393                 n = read(fd, buf, len);
 394                 if (n <= 0)
 395                         goto out;
 396
 397                 buf = (char *)buf + n;
 398                 len -= n;
 399         } while (len > 0);
 400
 401         rc = 0;
 402 out:
 403         return rc;
 404 }
 405
 406 static int
 407 kwboot_tty_send(int fd, const void *buf, size_t len)
 408 {
 409         if (!buf)
 410                 return 0;
 411
 412         if (kwboot_write(fd, buf, len) < 0)
 413                 return -1;
 414
 415         return tcdrain(fd);
 416 }
 417
 418 static int
 419 kwboot_tty_send_char(int fd, unsigned char c)
 420 {
 421         return kwboot_tty_send(fd, &c, 1);
 422 }
 423
 424 static speed_t
 425 kwboot_tty_baudrate_to_speed(int baudrate)
 426 {
 427         switch (baudrate) {
 428 #ifdef B4000000
 429         case 4000000:
 430                 return B4000000;
 431 #endif
 432 #ifdef B3500000
 433         case 3500000:
 434                 return B3500000;
 435 #endif
 436 #ifdef B3000000
 437         case 3000000:
 438                 return B3000000;
 439 #endif
 440 #ifdef B2500000
 441         case 2500000:
 442                 return B2500000;
 443 #endif
 444 #ifdef B2000000
 445         case 2000000:
 446                 return B2000000;
 447 #endif
 448 #ifdef B1500000
 449         case 1500000:
 450                 return B1500000;
 451 #endif
 452 #ifdef B1152000
 453         case 1152000:
 454                 return B1152000;
 455 #endif
 456 #ifdef B1000000
 457         case 1000000:
 458                 return B1000000;
 459 #endif
 460 #ifdef B921600
 461         case 921600:
 462                 return B921600;
 463 #endif
 464 #ifdef B614400
 465         case 614400:
 466                 return B614400;
 467 #endif
 468 #ifdef B576000
 469         case 576000:
 470                 return B576000;
 471 #endif
 472 #ifdef B500000
 473         case 500000:
 474                 return B500000;
 475 #endif
 476 #ifdef B460800
 477         case 460800:
 478                 return B460800;
 479 #endif
 480 #ifdef B307200
 481         case 307200:
 482                 return B307200;
 483 #endif
 484 #ifdef B230400
 485         case 230400:
 486                 return B230400;
 487 #endif
 488 #ifdef B153600
 489         case 153600:
 490                 return B153600;
 491 #endif
 492 #ifdef B115200
 493         case 115200:
 494                 return B115200;
 495 #endif
 496 #ifdef B76800
 497         case 76800:
 498                 return B76800;
 499 #endif
 500 #ifdef B57600
 501         case 57600:
 502                 return B57600;
 503 #endif
 504 #ifdef B38400
 505         case 38400:
 506                 return B38400;
 507 #endif
 508 #ifdef B19200
 509         case 19200:
 510                 return B19200;
 511 #endif
 512 #ifdef B9600
 513         case 9600:
 514                 return B9600;
 515 #endif
 516 #ifdef B4800
 517         case 4800:
 518                 return B4800;
 519 #endif
 520 #ifdef B2400
 521         case 2400:
 522                 return B2400;
 523 #endif
 524 #ifdef B1800
 525         case 1800:
 526                 return B1800;
 527 #endif
 528 #ifdef B1200
 529         case 1200:
 530                 return B1200;
 531 #endif
 532 #ifdef B600
 533         case 600:
 534                 return B600;
 535 #endif
 536 #ifdef B300
 537         case 300:
 538                 return B300;
 539 #endif
 540 #ifdef B200
 541         case 200:
 542                 return B200;
 543 #endif
 544 #ifdef B150
 545         case 150:
 546                 return B150;
 547 #endif
 548 #ifdef B134
 549         case 134:
 550                 return B134;
 551 #endif
 552 #ifdef B110
 553         case 110:
 554                 return B110;
 555 #endif
 556 #ifdef B75
 557         case 75:
 558                 return B75;
 559 #endif
 560 #ifdef B50
 561         case 50:
 562                 return B50;
 563 #endif
 564         default:
 565 #ifdef BOTHER
 566                 return BOTHER;
 567 #else
 568                 return B0;
 569 #endif
 570         }
 571 }
 572
 573 static int
 574 _is_within_tolerance(int value, int reference, int tolerance)
 575 {
 576         return 100 * value >= reference * (100 - tolerance) &&
 577                100 * value <= reference * (100 + tolerance);
 578 }
 579
 580 static int
 581 kwboot_tty_change_baudrate(int fd, int baudrate)
 582 {
 583         struct termios tio;
 584         speed_t speed;
 585         int rc;
 586
 587         rc = tcgetattr(fd, &tio);
 588         if (rc)
 589                 return rc;
 590
 591         speed = kwboot_tty_baudrate_to_speed(baudrate);
 592         if (speed == B0) {
 593                 errno = EINVAL;
 594                 return -1;
 595         }
 596
 597 #ifdef BOTHER
 598         if (speed == BOTHER)
 599                 tio.c_ospeed = tio.c_ispeed = baudrate;
 600 #endif
 601
 602         rc = cfsetospeed(&tio, speed);
 603         if (rc)
 604                 return rc;
 605
 606         rc = cfsetispeed(&tio, speed);
 607         if (rc)
 608                 return rc;
 609
 610         rc = tcsetattr(fd, TCSANOW, &tio);
 611         if (rc)
 612                 return rc;
 613
 614         rc = tcgetattr(fd, &tio);
 615         if (rc)
 616                 return rc;
 617
 618         if (cfgetospeed(&tio) != speed || cfgetispeed(&tio) != speed)
 619                 goto baud_fail;
 620
 621 #ifdef BOTHER
 622         /*
 623          * Check whether set baudrate is within 3% tolerance.
 624          * If BOTHER is defined, Linux always fills out c_ospeed / c_ispeed
 625          * with real values.
 626          */
 627         if (!_is_within_tolerance(tio.c_ospeed, baudrate, 3))
 628                 goto baud_fail;
 629
 630         if (!_is_within_tolerance(tio.c_ispeed, baudrate, 3))
 631                 goto baud_fail;
 632 #endif
 633
 634         return 0;
 635
 636 baud_fail:
 637         fprintf(stderr, "Could not set baudrate to requested value\n");
 638         errno = EINVAL;
 639         return -1;
 640 }
 641
 642 static int
 643 kwboot_open_tty(const char *path, int baudrate)
 644 {
 645         int rc, fd, flags;
 646         struct termios tio;
 647
 648         rc = -1;
 649
 650         fd = open(path, O_RDWR | O_NOCTTY | O_NDELAY);
 651         if (fd < 0)
 652                 goto out;
 653
 654         rc = tcgetattr(fd, &tio);
 655         if (rc)
 656                 goto out;
 657
 658         cfmakeraw(&tio);
 659         tio.c_cflag |= CREAD | CLOCAL;
 660         tio.c_cflag &= ~(CSTOPB | HUPCL | CRTSCTS);
 661         tio.c_cc[VMIN] = 1;
 662         tio.c_cc[VTIME] = 0;
 663
 664         rc = tcsetattr(fd, TCSANOW, &tio);
 665         if (rc)
 666                 goto out;
 667
 668         flags = fcntl(fd, F_GETFL);
 669         if (flags < 0)
 670                 goto out;
 671
 672         rc = fcntl(fd, F_SETFL, flags & ~O_NDELAY);
 673         if (rc)
 674                 goto out;
 675
 676         rc = kwboot_tty_change_baudrate(fd, baudrate);
 677         if (rc)
 678                 goto out;
 679
 680         rc = fd;
 681 out:
 682         if (rc < 0) {
 683                 if (fd >= 0)
 684                         close(fd);
 685         }
 686
 687         return rc;
 688 }
 689
 690 static int
 691 kwboot_bootmsg(int tty, void *msg)
 692 {
 693         int rc;
 694         char c;
 695         int count;
 696
 697         if (msg == NULL)
 698                 kwboot_printv("Please reboot the target into UART boot mode...");
 699         else
 700                 kwboot_printv("Sending boot message. Please reboot the target...");
 701
 702         do {
 703                 rc = tcflush(tty, TCIOFLUSH);
 704                 if (rc)
 705                         break;
 706
 707                 for (count = 0; count < 128; count++) {
 708                         rc = kwboot_tty_send(tty, msg, 8);
 709                         if (rc) {
 710                                 usleep(msg_req_delay * 1000);
 711                                 continue;
 712                         }
 713                 }
 714
 715                 rc = kwboot_tty_recv(tty, &c, 1, msg_rsp_timeo);
 716
 717                 kwboot_spinner();
 718
 719         } while (rc || c != NAK);
 720
 721         kwboot_printv("\n");
 722
 723         return rc;
 724 }
 725
 726 static int
 727 kwboot_debugmsg(int tty, void *msg)
 728 {
 729         int rc;
 730
 731         kwboot_printv("Sending debug message. Please reboot the target...");
 732
 733         do {
 734                 char buf[16];
 735
 736                 rc = tcflush(tty, TCIOFLUSH);
 737                 if (rc)
 738                         break;
 739
 740                 rc = kwboot_tty_send(tty, msg, 8);
 741                 if (rc) {
 742                         usleep(msg_req_delay * 1000);
 743                         continue;
 744                 }
 745
 746                 rc = kwboot_tty_recv(tty, buf, 16, msg_rsp_timeo);
 747
 748                 kwboot_spinner();
 749
 750         } while (rc);
 751
 752         kwboot_printv("\n");
 753
 754         return rc;
 755 }
 756
 757 static size_t
 758 kwboot_xm_makeblock(struct kwboot_block *block, const void *data,
 759                     size_t size, int pnum)
 760 {
 761         size_t i, n;
 762
 763         block->soh = SOH;
 764         block->pnum = pnum;
 765         block->_pnum = ~block->pnum;
 766
 767         n = size < KWBOOT_XM_BLKSZ ? size : KWBOOT_XM_BLKSZ;
 768         memcpy(&block->data[0], data, n);
 769         memset(&block->data[n], 0, KWBOOT_XM_BLKSZ - n);
 770
 771         block->csum = 0;
 772         for (i = 0; i < n; i++)
 773                 block->csum += block->data[i];
 774
 775         return n;
 776 }
 777
 778 static uint64_t
 779 _now(void)
 780 {
 781         struct timespec ts;
 782
 783         if (clock_gettime(CLOCK_MONOTONIC, &ts)) {
 784                 static int err_print;
 785
 786                 if (!err_print) {
 787                         perror("clock_gettime() does not work");
 788                         err_print = 1;
 789                 }
 790
 791                 /* this will just make the timeout not work */
 792                 return -1ULL;
 793         }
 794
 795         return ts.tv_sec * 1000ULL + (ts.tv_nsec + 500000) / 1000000;
 796 }
 797
 798 static int
 799 _is_xm_reply(char c)
 800 {
 801         return c == ACK || c == NAK || c == CAN;
 802 }
 803
 804 static int
 805 _xm_reply_to_error(int c)
 806 {
 807         int rc = -1;
 808
 809         switch (c) {
 810         case ACK:
 811                 rc = 0;
 812                 break;
 813         case NAK:
 814                 errno = EBADMSG;
 815                 break;
 816         case CAN:
 817                 errno = ECANCELED;
 818                 break;
 819         default:
 820                 errno = EPROTO;
 821                 break;
 822         }
 823
 824         return rc;
 825 }
 826
 827 static int
 828 kwboot_baud_magic_handle(int fd, char c, int baudrate)
 829 {
 830         static size_t rcv_len;
 831
 832         if (rcv_len < sizeof(kwb_baud_magic)) {
 833                 /* try to recognize whole magic word */
 834                 if (c == kwb_baud_magic[rcv_len]) {
 835                         rcv_len++;
 836                 } else {
 837                         printf("%.*s%c", (int)rcv_len, kwb_baud_magic, c);
 838                         fflush(stdout);
 839                         rcv_len = 0;
 840                 }
 841         }
 842
 843         if (rcv_len == sizeof(kwb_baud_magic)) {
 844                 /* magic word received */
 845                 kwboot_printv("\nChanging baudrate to %d Bd\n", baudrate);
 846
 847                 return kwboot_tty_change_baudrate(fd, baudrate) ? : 1;
 848         } else {
 849                 return 0;
 850         }
 851 }
 852
 853 static int
 854 kwboot_xm_recv_reply(int fd, char *c, int allow_non_xm, int *non_xm_print,
 855                      int baudrate, int *baud_changed)
 856 {
 857         int timeout = allow_non_xm ? KWBOOT_HDR_RSP_TIMEO : blk_rsp_timeo;
 858         uint64_t recv_until = _now() + timeout;
 859         int rc;
 860
 861         if (non_xm_print)
 862                 *non_xm_print = 0;
 863         if (baud_changed)
 864                 *baud_changed = 0;
 865
 866         while (1) {
 867                 rc = kwboot_tty_recv(fd, c, 1, timeout);
 868                 if (rc) {
 869                         if (errno != ETIMEDOUT)
 870                                 return rc;
 871                         else if (allow_non_xm && *non_xm_print)
 872                                 return -1;
 873                         else
 874                                 *c = NAK;
 875                 }
 876
 877                 /* If received xmodem reply, end. */
 878                 if (_is_xm_reply(*c))
 879                         break;
 880
 881                 /*
 882                  * If receiving/printing non-xmodem text output is allowed and
 883                  * such a byte was received, we want to increase receiving time
 884                  * and either:
 885                  * - print the byte, if it is not part of baudrate change magic
 886                  *   sequence while baudrate change was requested (-B option)
 887                  * - change baudrate
 888                  * Otherwise decrease timeout by time elapsed.
 889                  */
 890                 if (allow_non_xm) {
 891                         recv_until = _now() + timeout;
 892
 893                         if (baudrate && !*baud_changed) {
 894                                 rc = kwboot_baud_magic_handle(fd, *c, baudrate);
 895                                 if (rc == 1)
 896                                         *baud_changed = 1;
 897                                 else if (!rc)
 898                                         *non_xm_print = 1;
 899                                 else
 900                                         return rc;
 901                         } else if (!baudrate || !*baud_changed) {
 902                                 putchar(*c);
 903                                 fflush(stdout);
 904                                 *non_xm_print = 1;
 905                         }
 906                 } else {
 907                         timeout = recv_until - _now();
 908                         if (timeout < 0) {
 909                                 errno = ETIMEDOUT;
 910                                 return -1;
 911                         }
 912                 }
 913         }
 914
 915         return 0;
 916 }
 917
 918 static int
 919 kwboot_xm_sendblock(int fd, struct kwboot_block *block, int allow_non_xm,
 920                     int *done_print, int baudrate)
 921 {
 922         int non_xm_print, baud_changed;
 923         int rc, err, retries;
 924         char c;
 925
 926         *done_print = 0;
 927
 928         retries = 16;
 929         do {
 930                 rc = kwboot_tty_send(fd, block, sizeof(*block));
 931                 if (rc)
 932                         return rc;
 933
 934                 if (allow_non_xm && !*done_print) {
 935                         kwboot_progress(100, '.');
 936                         kwboot_printv("Done\n");
 937                         *done_print = 1;
 938                 }
 939
 940                 rc = kwboot_xm_recv_reply(fd, &c, allow_non_xm, &non_xm_print,
 941                                           baudrate, &baud_changed);
 942                 if (rc)
 943                         goto can;
 944
 945                 if (!allow_non_xm && c != ACK)
 946                         kwboot_progress(-1, '+');
 947         } while (c == NAK && retries-- > 0);
 948
 949         if (non_xm_print)
 950                 kwboot_printv("\n");
 951
 952         if (allow_non_xm && baudrate && !baud_changed) {
 953                 fprintf(stderr, "Baudrate was not changed\n");
 954                 rc = -1;
 955                 errno = EPROTO;
 956                 goto can;
 957         }
 958
 959         return _xm_reply_to_error(c);
 960 can:
 961         err = errno;
 962         kwboot_tty_send_char(fd, CAN);
 963         kwboot_printv("\n");
 964         errno = err;
 965         return rc;
 966 }
 967
 968 static int
 969 kwboot_xm_finish(int fd)
 970 {
 971         int rc, retries;
 972         char c;
 973
 974         kwboot_printv("Finishing transfer\n");
 975
 976         retries = 16;
 977         do {
 978                 rc = kwboot_tty_send_char(fd, EOT);
 979                 if (rc)
 980                         return rc;
 981
 982                 rc = kwboot_xm_recv_reply(fd, &c, 0, NULL, 0, NULL);
 983                 if (rc)
 984                         return rc;
 985         } while (c == NAK && retries-- > 0);
 986
 987         return _xm_reply_to_error(c);
 988 }
 989
 990 static int
 991 kwboot_xmodem_one(int tty, int *pnum, int header, const uint8_t *data,
 992                   size_t size, int baudrate)
 993 {
 994         int done_print = 0;
 995         size_t sent, left;
 996         int rc;
 997
 998         kwboot_printv("Sending boot image %s (%zu bytes)...\n",
 999                       header ? "header" : "data", size);
1000
1001         left = size;
1002         sent = 0;
1003
1004         while (sent < size) {
1005                 struct kwboot_block block;
1006                 int last_block;
1007                 size_t blksz;
1008
1009                 blksz = kwboot_xm_makeblock(&block, data, left, (*pnum)++);
1010                 data += blksz;
1011
1012                 last_block = (left <= blksz);
1013
1014                 rc = kwboot_xm_sendblock(tty, &block, header && last_block,
1015                                          &done_print, baudrate);
1016                 if (rc)
1017                         goto out;
1018
1019                 sent += blksz;
1020                 left -= blksz;
1021
1022                 if (!done_print)
1023                         kwboot_progress(sent * 100 / size, '.');
1024         }
1025
1026         if (!done_print)
1027                 kwboot_printv("Done\n");
1028
1029         return 0;
1030 out:
1031         kwboot_printv("\n");
1032         return rc;
1033 }
1034
1035 static int
1036 kwboot_xmodem(int tty, const void *_img, size_t size, int baudrate)
1037 {
1038         const uint8_t *img = _img;
1039         int rc, pnum;
1040         size_t hdrsz;
1041
1042         hdrsz = kwbheader_size(img);
1043
1044         kwboot_printv("Waiting 2s and flushing tty\n");
1045         sleep(2); /* flush isn't effective without it */
1046         tcflush(tty, TCIOFLUSH);
1047
1048         pnum = 1;
1049
1050         rc = kwboot_xmodem_one(tty, &pnum, 1, img, hdrsz, baudrate);
1051         if (rc)
1052                 return rc;
1053
1054         img += hdrsz;
1055         size -= hdrsz;
1056
1057         rc = kwboot_xmodem_one(tty, &pnum, 0, img, size, 0);
1058         if (rc)
1059                 return rc;
1060
1061         rc = kwboot_xm_finish(tty);
1062         if (rc)
1063                 return rc;
1064
1065         if (baudrate) {
1066                 char buf[sizeof(kwb_baud_magic)];
1067
1068                 /* Wait 1s for baudrate change magic */
1069                 rc = kwboot_tty_recv(tty, buf, sizeof(buf), 1000);
1070                 if (rc)
1071                         return rc;
1072
1073                 if (memcmp(buf, kwb_baud_magic, sizeof(buf))) {
1074                         errno = EPROTO;
1075                         return -1;
1076                 }
1077
1078                 kwboot_printv("\nChanging baudrate back to 115200 Bd\n\n");
1079                 rc = kwboot_tty_change_baudrate(tty, 115200);
1080                 if (rc)
1081                         return rc;
1082         }
1083
1084         return 0;
1085 }
1086
1087 static int
1088 kwboot_term_pipe(int in, int out, const char *quit, int *s)
1089 {
1090         ssize_t nin;
1091         char _buf[128], *buf = _buf;
1092
1093         nin = read(in, buf, sizeof(_buf));
1094         if (nin <= 0)
1095                 return -1;
1096
1097         if (quit) {
1098                 int i;
1099
1100                 for (i = 0; i < nin; i++) {
1101                         if (*buf == quit[*s]) {
1102                                 (*s)++;
1103                                 if (!quit[*s])
1104                                         return 0;
1105                                 buf++;
1106                                 nin--;
1107                         } else {
1108                                 if (kwboot_write(out, quit, *s) < 0)
1109                                         return -1;
1110                                 *s = 0;
1111                         }
1112                 }
1113         }
1114
1115         if (kwboot_write(out, buf, nin) < 0)
1116                 return -1;
1117
1118         return 0;
1119 }
1120
1121 static int
1122 kwboot_terminal(int tty)
1123 {
1124         int rc, in, s;
1125         const char *quit = "\34c";
1126         struct termios otio, tio;
1127
1128         rc = -1;
1129
1130         in = STDIN_FILENO;
1131         if (isatty(in)) {
1132                 rc = tcgetattr(in, &otio);
1133                 if (!rc) {
1134                         tio = otio;
1135                         cfmakeraw(&tio);
1136                         rc = tcsetattr(in, TCSANOW, &tio);
1137                 }
1138                 if (rc) {
1139                         perror("tcsetattr");
1140                         goto out;
1141                 }
1142
1143                 kwboot_printv("[Type Ctrl-%c + %c to quit]\r\n",
1144                               quit[0] | 0100, quit[1]);
1145         } else
1146                 in = -1;
1147
1148         rc = 0;
1149         s = 0;
1150
1151         do {
1152                 fd_set rfds;
1153                 int nfds = 0;
1154
1155                 FD_ZERO(&rfds);
1156                 FD_SET(tty, &rfds);
1157                 nfds = nfds < tty ? tty : nfds;
1158
1159                 if (in >= 0) {
1160                         FD_SET(in, &rfds);
1161                         nfds = nfds < in ? in : nfds;
1162                 }
1163
1164                 nfds = select(nfds + 1, &rfds, NULL, NULL, NULL);
1165                 if (nfds < 0)
1166                         break;
1167
1168                 if (FD_ISSET(tty, &rfds)) {
1169                         rc = kwboot_term_pipe(tty, STDOUT_FILENO, NULL, NULL);
1170                         if (rc)
1171                                 break;
1172                 }
1173
1174                 if (in >= 0 && FD_ISSET(in, &rfds)) {
1175                         rc = kwboot_term_pipe(in, tty, quit, &s);
1176                         if (rc)
1177                                 break;
1178                 }
1179         } while (quit[s] != 0);
1180
1181         if (in >= 0)
1182                 tcsetattr(in, TCSANOW, &otio);
1183         printf("\n");
1184 out:
1185         return rc;
1186 }
1187
1188 static void *
1189 kwboot_read_image(const char *path, size_t *size, size_t reserve)
1190 {
1191         int rc, fd;
1192         struct stat st;
1193         void *img;
1194         off_t tot;
1195
1196         rc = -1;
1197         img = NULL;
1198
1199         fd = open(path, O_RDONLY);
1200         if (fd < 0)
1201                 goto out;
1202
1203         rc = fstat(fd, &st);
1204         if (rc)
1205                 goto out;
1206
1207         img = malloc(st.st_size + reserve);
1208         if (!img)
1209                 goto out;
1210
1211         tot = 0;
1212         while (tot < st.st_size) {
1213                 ssize_t rd = read(fd, img + tot, st.st_size - tot);
1214
1215                 if (rd < 0)
1216                         goto out;
1217
1218                 tot += rd;
1219
1220                 if (!rd && tot < st.st_size) {
1221                         errno = EIO;
1222                         goto out;
1223                 }
1224         }
1225
1226         rc = 0;
1227         *size = st.st_size;
1228 out:
1229         if (rc && img) {
1230                 free(img);
1231                 img = NULL;
1232         }
1233         if (fd >= 0)
1234                 close(fd);
1235
1236         return img;
1237 }
1238
1239 static uint8_t
1240 kwboot_hdr_csum8(const void *hdr)
1241 {
1242         const uint8_t *data = hdr;
1243         uint8_t csum;
1244         size_t size;
1245
1246         size = kwbheader_size_for_csum(hdr);
1247
1248         for (csum = 0; size-- > 0; data++)
1249                 csum += *data;
1250
1251         return csum;
1252 }
1253
1254 static int
1255 kwboot_img_is_secure(void *img)
1256 {
1257         struct opt_hdr_v1 *ohdr;
1258
1259         for_each_opt_hdr_v1 (ohdr, img)
1260                 if (ohdr->headertype == OPT_HDR_V1_SECURE_TYPE)
1261                         return 1;
1262
1263         return 0;
1264 }
1265
1266 static void *
1267 kwboot_img_grow_data_left(void *img, size_t *size, size_t grow)
1268 {
1269         uint32_t hdrsz, datasz, srcaddr;
1270         struct main_hdr_v1 *hdr = img;
1271         uint8_t *data;
1272
1273         srcaddr = le32_to_cpu(hdr->srcaddr);
1274
1275         hdrsz = kwbheader_size(hdr);
1276         data = (uint8_t *)img + srcaddr;
1277         datasz = *size - srcaddr;
1278
1279         /* only move data if there is not enough space */
1280         if (hdrsz + grow > srcaddr) {
1281                 size_t need = hdrsz + grow - srcaddr;
1282
1283                 /* move data by enough bytes */
1284                 memmove(data + need, data, datasz);
1285                 *size += need;
1286                 srcaddr += need;
1287         }
1288
1289         srcaddr -= grow;
1290         hdr->srcaddr = cpu_to_le32(srcaddr);
1291         hdr->destaddr = cpu_to_le32(le32_to_cpu(hdr->destaddr) - grow);
1292         hdr->blocksize = cpu_to_le32(le32_to_cpu(hdr->blocksize) + grow);
1293
1294         return (uint8_t *)img + srcaddr;
1295 }
1296
1297 static void
1298 kwboot_img_grow_hdr(void *img, size_t *size, size_t grow)
1299 {
1300         uint32_t hdrsz, datasz, srcaddr;
1301         struct main_hdr_v1 *hdr = img;
1302         uint8_t *data;
1303
1304         srcaddr = le32_to_cpu(hdr->srcaddr);
1305
1306         hdrsz = kwbheader_size(img);
1307         data = (uint8_t *)img + srcaddr;
1308         datasz = *size - srcaddr;
1309
1310         /* only move data if there is not enough space */
1311         if (hdrsz + grow > srcaddr) {
1312                 size_t need = hdrsz + grow - srcaddr;
1313
1314                 /* move data by enough bytes */
1315                 memmove(data + need, data, datasz);
1316
1317                 hdr->srcaddr = cpu_to_le32(srcaddr + need);
1318                 *size += need;
1319         }
1320
1321         if (kwbimage_version(img) == 1) {
1322                 hdrsz += grow;
1323                 hdr->headersz_msb = hdrsz >> 16;
1324                 hdr->headersz_lsb = cpu_to_le16(hdrsz & 0xffff);
1325         }
1326 }
1327
1328 static void *
1329 kwboot_add_bin_ohdr_v1(void *img, size_t *size, uint32_t binsz)
1330 {
1331         struct main_hdr_v1 *hdr = img;
1332         struct opt_hdr_v1 *ohdr;
1333         uint32_t num_args;
1334         uint32_t offset;
1335         uint32_t ohdrsz;
1336
1337         if (hdr->ext & 0x1) {
1338                 for_each_opt_hdr_v1 (ohdr, img)
1339                         if (opt_hdr_v1_next(ohdr) == NULL)
1340                                 break;
1341
1342                 *opt_hdr_v1_ext(ohdr) |= 1;
1343                 ohdr = opt_hdr_v1_next(ohdr);
1344         } else {
1345                 hdr->ext |= 1;
1346                 ohdr = (void *)(hdr + 1);
1347         }
1348
1349         /*
1350          * ARM executable code inside the BIN header on some mvebu platforms
1351          * (e.g. A370, AXP) must always be aligned with the 128-bit boundary.
1352          * This requirement can be met by inserting dummy arguments into
1353          * BIN header, if needed.
1354          */
1355         offset = &ohdr->data[4] - (char *)img;
1356         num_args = ((16 - offset % 16) % 16) / sizeof(uint32_t);
1357
1358         ohdrsz = sizeof(*ohdr) + 4 + 4 * num_args + binsz + 4;
1359         kwboot_img_grow_hdr(hdr, size, ohdrsz);
1360
1361         ohdr->headertype = OPT_HDR_V1_BINARY_TYPE;
1362         ohdr->headersz_msb = ohdrsz >> 16;
1363         ohdr->headersz_lsb = cpu_to_le16(ohdrsz & 0xffff);
1364
1365         memset(&ohdr->data[0], 0, ohdrsz - sizeof(*ohdr));
1366         *(uint32_t *)&ohdr->data[0] = cpu_to_le32(num_args);
1367
1368         return &ohdr->data[4 + 4 * num_args];
1369 }
1370
1371 static void
1372 _copy_baudrate_change_code(struct main_hdr_v1 *hdr, void *dst, int pre,
1373                            int old_baud, int new_baud)
1374 {
1375         size_t codesz = sizeof(kwboot_baud_code);
1376         uint8_t *code = dst;
1377
1378         if (pre) {
1379                 size_t presz = sizeof(kwboot_pre_baud_code);
1380
1381                 /*
1382                  * We need to prepend code that loads lr register with original
1383                  * value of hdr->execaddr. We do this by putting the original
1384                  * exec address before the code that loads it relatively from
1385                  * it's beginning.
1386                  * Afterwards we change the exec address to this code (which is
1387                  * at offset 4, because the first 4 bytes contain the original
1388                  * exec address).
1389                  */
1390                 memcpy(code, kwboot_pre_baud_code, presz);
1391                 *(uint32_t *)code = hdr->execaddr;
1392
1393                 hdr->execaddr = cpu_to_le32(le32_to_cpu(hdr->destaddr) + 4);
1394
1395                 code += presz;
1396         }
1397
1398         memcpy(code, kwboot_baud_code, codesz - 8);
1399         *(uint32_t *)(code + codesz - 8) = cpu_to_le32(old_baud);
1400         *(uint32_t *)(code + codesz - 4) = cpu_to_le32(new_baud);
1401 }
1402
1403 static int
1404 kwboot_img_patch(void *img, size_t *size, int baudrate)
1405 {
1406         struct main_hdr_v1 *hdr;
1407         uint32_t srcaddr;
1408         uint8_t csum;
1409         size_t hdrsz;
1410         int image_ver;
1411         int is_secure;
1412
1413         hdr = img;
1414
1415         if (*size < sizeof(struct main_hdr_v1))
1416                 goto err;
1417
1418         image_ver = kwbimage_version(img);
1419         if (image_ver != 0 && image_ver != 1) {
1420                 fprintf(stderr, "Invalid image header version\n");
1421                 goto err;
1422         }
1423
1424         hdrsz = kwbheader_size(hdr);
1425
1426         if (*size < hdrsz)
1427                 goto err;
1428
1429         csum = kwboot_hdr_csum8(hdr) - hdr->checksum;
1430         if (csum != hdr->checksum)
1431                 goto err;
1432
1433         srcaddr = le32_to_cpu(hdr->srcaddr);
1434
1435         switch (hdr->blockid) {
1436         case IBR_HDR_SATA_ID:
1437                 if (srcaddr < 1)
1438                         goto err;
1439
1440                 hdr->srcaddr = cpu_to_le32((srcaddr - 1) * 512);
1441                 break;
1442
1443         case IBR_HDR_SDIO_ID:
1444                 hdr->srcaddr = cpu_to_le32(srcaddr * 512);
1445                 break;
1446
1447         case IBR_HDR_PEX_ID:
1448                 if (srcaddr == 0xFFFFFFFF)
1449                         hdr->srcaddr = cpu_to_le32(hdrsz);
1450                 break;
1451
1452         case IBR_HDR_SPI_ID:
1453                 if (hdr->destaddr == cpu_to_le32(0xFFFFFFFF)) {
1454                         kwboot_printv("Patching destination and execution addresses from SPI/NOR XIP area to DDR area 0x00800000\n");
1455                         hdr->destaddr = cpu_to_le32(0x00800000);
1456                         hdr->execaddr = cpu_to_le32(0x00800000);
1457                 }
1458                 break;
1459         }
1460
1461         if (hdrsz > le32_to_cpu(hdr->srcaddr) ||
1462             *size < le32_to_cpu(hdr->srcaddr) + le32_to_cpu(hdr->blocksize))
1463                 goto err;
1464
1465         is_secure = kwboot_img_is_secure(img);
1466
1467         if (hdr->blockid != IBR_HDR_UART_ID) {
1468                 if (is_secure) {
1469                         fprintf(stderr,
1470                                 "Image has secure header with signature for non-UART booting\n");
1471                         goto err;
1472                 }
1473
1474                 kwboot_printv("Patching image boot signature to UART\n");
1475                 hdr->blockid = IBR_HDR_UART_ID;
1476         }
1477
1478         if (!is_secure) {
1479                 if (image_ver == 0)
1480                         ((struct main_hdr_v0 *)img)->nandeccmode = IBR_HDR_ECC_DISABLED;
1481                 hdr->nandpagesize = 0;
1482         }
1483
1484         if (baudrate) {
1485                 uint32_t codesz = sizeof(kwboot_baud_code);
1486                 void *code;
1487
1488                 if (image_ver == 0) {
1489                         fprintf(stderr,
1490                                 "Cannot inject code for changing baudrate into v0 image header\n");
1491                         goto err;
1492                 }
1493
1494                 if (is_secure) {
1495                         fprintf(stderr,
1496                                 "Cannot inject code for changing baudrate into image with secure header\n");
1497                         goto err;
1498                 }
1499
1500                 /*
1501                  * First inject code that changes the baudrate from the default
1502                  * value of 115200 Bd to requested value. This code is inserted
1503                  * as a new opt hdr, so it is executed by BootROM after the
1504                  * header part is received.
1505                  */
1506                 kwboot_printv("Injecting binary header code for changing baudrate to %d Bd\n",
1507                               baudrate);
1508
1509                 code = kwboot_add_bin_ohdr_v1(img, size, codesz);
1510                 _copy_baudrate_change_code(hdr, code, 0, 115200, baudrate);
1511
1512                 /*
1513                  * Now inject code that changes the baudrate back to 115200 Bd.
1514                  * This code is prepended to the data part of the image, so it
1515                  * is executed before U-Boot proper.
1516                  */
1517                 kwboot_printv("Injecting code for changing baudrate back\n");
1518
1519                 codesz += sizeof(kwboot_pre_baud_code);
1520                 code = kwboot_img_grow_data_left(img, size, codesz);
1521                 _copy_baudrate_change_code(hdr, code, 1, baudrate, 115200);
1522
1523                 /* recompute header size */
1524                 hdrsz = kwbheader_size(hdr);
1525         }
1526
1527         if (hdrsz % KWBOOT_XM_BLKSZ) {
1528                 size_t offset = (KWBOOT_XM_BLKSZ - hdrsz % KWBOOT_XM_BLKSZ) %
1529                                 KWBOOT_XM_BLKSZ;
1530
1531                 if (is_secure) {
1532                         fprintf(stderr, "Cannot align image with secure header\n");
1533                         goto err;
1534                 }
1535
1536                 kwboot_printv("Aligning image header to Xmodem block size\n");
1537                 kwboot_img_grow_hdr(img, size, offset);
1538         }
1539
1540         hdr->checksum = kwboot_hdr_csum8(hdr) - csum;
1541
1542         *size = le32_to_cpu(hdr->srcaddr) + le32_to_cpu(hdr->blocksize);
1543         return 0;
1544 err:
1545         errno = EINVAL;
1546         return -1;
1547 }
1548
1549 static void
1550 kwboot_usage(FILE *stream, char *progname)
1551 {
1552         fprintf(stream, "kwboot version %s\n", PLAIN_VERSION);
1553         fprintf(stream,
1554                 "Usage: %s [OPTIONS] [-b <image> | -D <image> ] [-B <baud> ] <TTY>\n",
1555                 progname);
1556         fprintf(stream, "\n");
1557         fprintf(stream,
1558                 "  -b <image>: boot <image> with preamble (Kirkwood, Armada 370/XP)\n");
1559         fprintf(stream,
1560                 "  -D <image>: boot <image> without preamble (Dove)\n");
1561         fprintf(stream, "  -d: enter debug mode\n");
1562         fprintf(stream, "  -a: use timings for Armada XP\n");
1563         fprintf(stream, "  -q <req-delay>:  use specific request-delay\n");
1564         fprintf(stream, "  -s <resp-timeo>: use specific response-timeout\n");
1565         fprintf(stream,
1566                 "  -o <block-timeo>: use specific xmodem block timeout\n");
1567         fprintf(stream, "\n");
1568         fprintf(stream, "  -t: mini terminal\n");
1569         fprintf(stream, "\n");
1570         fprintf(stream, "  -B <baud>: set baud rate\n");
1571         fprintf(stream, "\n");
1572 }
1573
1574 int
1575 main(int argc, char **argv)
1576 {
1577         const char *ttypath, *imgpath;
1578         int rv, rc, tty, term;
1579         void *bootmsg;
1580         void *debugmsg;
1581         void *img;
1582         size_t size;
1583         size_t after_img_rsv;
1584         int baudrate;
1585
1586         rv = 1;
1587         tty = -1;
1588         bootmsg = NULL;
1589         debugmsg = NULL;
1590         imgpath = NULL;
1591         img = NULL;
1592         term = 0;
1593         size = 0;
1594         after_img_rsv = KWBOOT_XM_BLKSZ;
1595         baudrate = 115200;
1596
1597         kwboot_verbose = isatty(STDOUT_FILENO);
1598
1599         do {
1600                 int c = getopt(argc, argv, "hb:ptaB:dD:q:s:o:");
1601                 if (c < 0)
1602                         break;
1603
1604                 switch (c) {
1605                 case 'b':
1606                         bootmsg = kwboot_msg_boot;
1607                         imgpath = optarg;
1608                         break;
1609
1610                 case 'D':
1611                         bootmsg = NULL;
1612                         imgpath = optarg;
1613                         break;
1614
1615                 case 'd':
1616                         debugmsg = kwboot_msg_debug;
1617                         break;
1618
1619                 case 'p':
1620                         /* nop, for backward compatibility */
1621                         break;
1622
1623                 case 't':
1624                         term = 1;
1625                         break;
1626
1627                 case 'a':
1628                         msg_req_delay = KWBOOT_MSG_REQ_DELAY_AXP;
1629                         msg_rsp_timeo = KWBOOT_MSG_RSP_TIMEO_AXP;
1630                         break;
1631
1632                 case 'q':
1633                         msg_req_delay = atoi(optarg);
1634                         break;
1635
1636                 case 's':
1637                         msg_rsp_timeo = atoi(optarg);
1638                         break;
1639
1640                 case 'o':
1641                         blk_rsp_timeo = atoi(optarg);
1642                         break;
1643
1644                 case 'B':
1645                         baudrate = atoi(optarg);
1646                         break;
1647
1648                 case 'h':
1649                         rv = 0;
1650                 default:
1651                         goto usage;
1652                 }
1653         } while (1);
1654
1655         if (!bootmsg && !term && !debugmsg)
1656                 goto usage;
1657
1658         if (argc - optind < 1)
1659                 goto usage;
1660
1661         ttypath = argv[optind++];
1662
1663         tty = kwboot_open_tty(ttypath, imgpath ? 115200 : baudrate);
1664         if (tty < 0) {
1665                 perror(ttypath);
1666                 goto out;
1667         }
1668
1669         if (baudrate == 115200)
1670                 /* do not change baudrate during Xmodem to the same value */
1671                 baudrate = 0;
1672         else
1673                 /* ensure we have enough space for baudrate change code */
1674                 after_img_rsv += KWBOOT_BAUDRATE_BIN_HEADER_SZ +
1675                                  KWBOOT_XM_BLKSZ +
1676                                  sizeof(kwboot_pre_baud_code) +
1677                                  sizeof(kwboot_baud_code) +
1678                                  KWBOOT_XM_BLKSZ;
1679
1680         if (imgpath) {
1681                 img = kwboot_read_image(imgpath, &size, after_img_rsv);
1682                 if (!img) {
1683                         perror(imgpath);
1684                         goto out;
1685                 }
1686
1687                 rc = kwboot_img_patch(img, &size, baudrate);
1688                 if (rc) {
1689                         fprintf(stderr, "%s: Invalid image.\n", imgpath);
1690                         goto out;
1691                 }
1692         }
1693
1694         if (debugmsg) {
1695                 rc = kwboot_debugmsg(tty, debugmsg);
1696                 if (rc) {
1697                         perror("debugmsg");
1698                         goto out;
1699                 }
1700         } else if (bootmsg) {
1701                 rc = kwboot_bootmsg(tty, bootmsg);
1702                 if (rc) {
1703                         perror("bootmsg");
1704                         goto out;
1705                 }
1706         }
1707
1708         if (img) {
1709                 rc = kwboot_xmodem(tty, img, size, baudrate);
1710                 if (rc) {
1711                         perror("xmodem");
1712                         goto out;
1713                 }
1714         }
1715
1716         if (term) {
1717                 rc = kwboot_terminal(tty);
1718                 if (rc && !(errno == EINTR)) {
1719                         perror("terminal");
1720                         goto out;
1721                 }
1722         }
1723
1724         rv = 0;
1725 out:
1726         if (tty >= 0)
1727                 close(tty);
1728
1729         if (img)
1730                 free(img);
1731
1732         return rv;
1733
1734 usage:
1735         kwboot_usage(rv ? stderr : stdout, basename(argv[0]));
1736         goto out;
1737 }