1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of version 2 of the GNU General Public
6 * License as published by the Free Software Foundation.
8 #ifndef _UAPI__LINUX_BPF_H__
9 #define _UAPI__LINUX_BPF_H__
11 #include <linux/types.h>
12 #include <linux/bpf_common.h>
14 /* Extended instruction set based on top of classic BPF */
16 /* instruction classes */
17 #define BPF_JMP32 0x06 /* jmp mode in word width */
18 #define BPF_ALU64 0x07 /* alu mode in double word width */
21 #define BPF_DW 0x18 /* double word (64-bit) */
22 #define BPF_ATOMIC 0xc0 /* atomic memory ops - op type in immediate */
23 #define BPF_XADD 0xc0 /* exclusive add - legacy name */
26 #define BPF_MOV 0xb0 /* mov reg to reg */
27 #define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */
29 /* change endianness of a register */
30 #define BPF_END 0xd0 /* flags for endianness conversion: */
31 #define BPF_TO_LE 0x00 /* convert to little-endian */
32 #define BPF_TO_BE 0x08 /* convert to big-endian */
33 #define BPF_FROM_LE BPF_TO_LE
34 #define BPF_FROM_BE BPF_TO_BE
37 #define BPF_JNE 0x50 /* jump != */
38 #define BPF_JLT 0xa0 /* LT is unsigned, '<' */
39 #define BPF_JLE 0xb0 /* LE is unsigned, '<=' */
40 #define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */
41 #define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */
42 #define BPF_JSLT 0xc0 /* SLT is signed, '<' */
43 #define BPF_JSLE 0xd0 /* SLE is signed, '<=' */
44 #define BPF_CALL 0x80 /* function call */
45 #define BPF_EXIT 0x90 /* function return */
47 /* atomic op type fields (stored in immediate) */
48 #define BPF_FETCH 0x01 /* not an opcode on its own, used to build others */
49 #define BPF_XCHG (0xe0 | BPF_FETCH) /* atomic exchange */
50 #define BPF_CMPXCHG (0xf0 | BPF_FETCH) /* atomic compare-and-write */
52 /* Register numbers */
68 /* BPF has 10 general purpose 64-bit registers and stack frame. */
69 #define MAX_BPF_REG __MAX_BPF_REG
72 __u8 code; /* opcode */
73 __u8 dst_reg:4; /* dest register */
74 __u8 src_reg:4; /* source register */
75 __s16 off; /* signed offset */
76 __s32 imm; /* signed immediate constant */
79 /* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
80 struct bpf_lpm_trie_key {
81 __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */
82 __u8 data[0]; /* Arbitrary size */
85 struct bpf_cgroup_storage_key {
86 __u64 cgroup_inode_id; /* cgroup inode id */
87 __u32 attach_type; /* program attach type (enum bpf_attach_type) */
90 enum bpf_cgroup_iter_order {
91 BPF_CGROUP_ITER_ORDER_UNSPEC = 0,
92 BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */
93 BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */
94 BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */
95 BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */
98 union bpf_iter_link_info {
103 enum bpf_cgroup_iter_order order;
105 /* At most one of cgroup_fd and cgroup_id can be non-zero. If
106 * both are zero, the walk starts from the default cgroup v2
107 * root. For walking v1 hierarchy, one should always explicitly
113 /* Parameters of task iterators. */
121 /* BPF syscall commands, see bpf(2) man-page for more details. */
123 * DOC: eBPF Syscall Preamble
125 * The operation to be performed by the **bpf**\ () system call is determined
126 * by the *cmd* argument. Each operation takes an accompanying argument,
127 * provided via *attr*, which is a pointer to a union of type *bpf_attr* (see
128 * below). The size argument is the size of the union pointed to by *attr*.
131 * DOC: eBPF Syscall Commands
135 * Create a map and return a file descriptor that refers to the
136 * map. The close-on-exec file descriptor flag (see **fcntl**\ (2))
137 * is automatically enabled for the new file descriptor.
139 * Applying **close**\ (2) to the file descriptor returned by
140 * **BPF_MAP_CREATE** will delete the map (but see NOTES).
143 * A new file descriptor (a nonnegative integer), or -1 if an
144 * error occurred (in which case, *errno* is set appropriately).
146 * BPF_MAP_LOOKUP_ELEM
148 * Look up an element with a given *key* in the map referred to
149 * by the file descriptor *map_fd*.
151 * The *flags* argument may be specified as one of the
155 * Look up the value of a spin-locked map without
156 * returning the lock. This must be specified if the
157 * elements contain a spinlock.
160 * Returns zero on success. On error, -1 is returned and *errno*
161 * is set appropriately.
163 * BPF_MAP_UPDATE_ELEM
165 * Create or update an element (key/value pair) in a specified map.
167 * The *flags* argument should be specified as one of the
171 * Create a new element or update an existing element.
173 * Create a new element only if it did not exist.
175 * Update an existing element.
177 * Update a spin_lock-ed map element.
180 * Returns zero on success. On error, -1 is returned and *errno*
181 * is set appropriately.
183 * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**,
184 * **E2BIG**, **EEXIST**, or **ENOENT**.
187 * The number of elements in the map reached the
188 * *max_entries* limit specified at map creation time.
190 * If *flags* specifies **BPF_NOEXIST** and the element
191 * with *key* already exists in the map.
193 * If *flags* specifies **BPF_EXIST** and the element with
194 * *key* does not exist in the map.
196 * BPF_MAP_DELETE_ELEM
198 * Look up and delete an element by key in a specified map.
201 * Returns zero on success. On error, -1 is returned and *errno*
202 * is set appropriately.
204 * BPF_MAP_GET_NEXT_KEY
206 * Look up an element by key in a specified map and return the key
207 * of the next element. Can be used to iterate over all elements
211 * Returns zero on success. On error, -1 is returned and *errno*
212 * is set appropriately.
214 * The following cases can be used to iterate over all elements of
217 * * If *key* is not found, the operation returns zero and sets
218 * the *next_key* pointer to the key of the first element.
219 * * If *key* is found, the operation returns zero and sets the
220 * *next_key* pointer to the key of the next element.
221 * * If *key* is the last element, returns -1 and *errno* is set
224 * May set *errno* to **ENOMEM**, **EFAULT**, **EPERM**, or
225 * **EINVAL** on error.
229 * Verify and load an eBPF program, returning a new file
230 * descriptor associated with the program.
232 * Applying **close**\ (2) to the file descriptor returned by
233 * **BPF_PROG_LOAD** will unload the eBPF program (but see NOTES).
235 * The close-on-exec file descriptor flag (see **fcntl**\ (2)) is
236 * automatically enabled for the new file descriptor.
239 * A new file descriptor (a nonnegative integer), or -1 if an
240 * error occurred (in which case, *errno* is set appropriately).
244 * Pin an eBPF program or map referred by the specified *bpf_fd*
245 * to the provided *pathname* on the filesystem.
247 * The *pathname* argument must not contain a dot (".").
249 * On success, *pathname* retains a reference to the eBPF object,
250 * preventing deallocation of the object when the original
251 * *bpf_fd* is closed. This allow the eBPF object to live beyond
252 * **close**\ (\ *bpf_fd*\ ), and hence the lifetime of the parent
255 * Applying **unlink**\ (2) or similar calls to the *pathname*
256 * unpins the object from the filesystem, removing the reference.
257 * If no other file descriptors or filesystem nodes refer to the
258 * same object, it will be deallocated (see NOTES).
260 * The filesystem type for the parent directory of *pathname* must
261 * be **BPF_FS_MAGIC**.
264 * Returns zero on success. On error, -1 is returned and *errno*
265 * is set appropriately.
269 * Open a file descriptor for the eBPF object pinned to the
270 * specified *pathname*.
273 * A new file descriptor (a nonnegative integer), or -1 if an
274 * error occurred (in which case, *errno* is set appropriately).
278 * Attach an eBPF program to a *target_fd* at the specified
279 * *attach_type* hook.
281 * The *attach_type* specifies the eBPF attachment point to
282 * attach the program to, and must be one of *bpf_attach_type*
285 * The *attach_bpf_fd* must be a valid file descriptor for a
286 * loaded eBPF program of a cgroup, flow dissector, LIRC, sockmap
287 * or sock_ops type corresponding to the specified *attach_type*.
289 * The *target_fd* must be a valid file descriptor for a kernel
290 * object which depends on the attach type of *attach_bpf_fd*:
292 * **BPF_PROG_TYPE_CGROUP_DEVICE**,
293 * **BPF_PROG_TYPE_CGROUP_SKB**,
294 * **BPF_PROG_TYPE_CGROUP_SOCK**,
295 * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
296 * **BPF_PROG_TYPE_CGROUP_SOCKOPT**,
297 * **BPF_PROG_TYPE_CGROUP_SYSCTL**,
298 * **BPF_PROG_TYPE_SOCK_OPS**
300 * Control Group v2 hierarchy with the eBPF controller
301 * enabled. Requires the kernel to be compiled with
302 * **CONFIG_CGROUP_BPF**.
304 * **BPF_PROG_TYPE_FLOW_DISSECTOR**
306 * Network namespace (eg /proc/self/ns/net).
308 * **BPF_PROG_TYPE_LIRC_MODE2**
310 * LIRC device path (eg /dev/lircN). Requires the kernel
311 * to be compiled with **CONFIG_BPF_LIRC_MODE2**.
313 * **BPF_PROG_TYPE_SK_SKB**,
314 * **BPF_PROG_TYPE_SK_MSG**
316 * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**).
319 * Returns zero on success. On error, -1 is returned and *errno*
320 * is set appropriately.
324 * Detach the eBPF program associated with the *target_fd* at the
325 * hook specified by *attach_type*. The program must have been
326 * previously attached using **BPF_PROG_ATTACH**.
329 * Returns zero on success. On error, -1 is returned and *errno*
330 * is set appropriately.
334 * Run the eBPF program associated with the *prog_fd* a *repeat*
335 * number of times against a provided program context *ctx_in* and
336 * data *data_in*, and return the modified program context
337 * *ctx_out*, *data_out* (for example, packet data), result of the
338 * execution *retval*, and *duration* of the test run.
340 * The sizes of the buffers provided as input and output
341 * parameters *ctx_in*, *ctx_out*, *data_in*, and *data_out* must
342 * be provided in the corresponding variables *ctx_size_in*,
343 * *ctx_size_out*, *data_size_in*, and/or *data_size_out*. If any
344 * of these parameters are not provided (ie set to NULL), the
345 * corresponding size field must be zero.
347 * Some program types have particular requirements:
349 * **BPF_PROG_TYPE_SK_LOOKUP**
350 * *data_in* and *data_out* must be NULL.
352 * **BPF_PROG_TYPE_RAW_TRACEPOINT**,
353 * **BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE**
355 * *ctx_out*, *data_in* and *data_out* must be NULL.
356 * *repeat* must be zero.
358 * BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN.
361 * Returns zero on success. On error, -1 is returned and *errno*
362 * is set appropriately.
365 * Either *data_size_out* or *ctx_size_out* is too small.
367 * This command is not supported by the program type of
368 * the program referred to by *prog_fd*.
370 * BPF_PROG_GET_NEXT_ID
372 * Fetch the next eBPF program currently loaded into the kernel.
374 * Looks for the eBPF program with an id greater than *start_id*
375 * and updates *next_id* on success. If no other eBPF programs
376 * remain with ids higher than *start_id*, returns -1 and sets
377 * *errno* to **ENOENT**.
380 * Returns zero on success. On error, or when no id remains, -1
381 * is returned and *errno* is set appropriately.
383 * BPF_MAP_GET_NEXT_ID
385 * Fetch the next eBPF map currently loaded into the kernel.
387 * Looks for the eBPF map with an id greater than *start_id*
388 * and updates *next_id* on success. If no other eBPF maps
389 * remain with ids higher than *start_id*, returns -1 and sets
390 * *errno* to **ENOENT**.
393 * Returns zero on success. On error, or when no id remains, -1
394 * is returned and *errno* is set appropriately.
396 * BPF_PROG_GET_FD_BY_ID
398 * Open a file descriptor for the eBPF program corresponding to
402 * A new file descriptor (a nonnegative integer), or -1 if an
403 * error occurred (in which case, *errno* is set appropriately).
405 * BPF_MAP_GET_FD_BY_ID
407 * Open a file descriptor for the eBPF map corresponding to
411 * A new file descriptor (a nonnegative integer), or -1 if an
412 * error occurred (in which case, *errno* is set appropriately).
414 * BPF_OBJ_GET_INFO_BY_FD
416 * Obtain information about the eBPF object corresponding to
419 * Populates up to *info_len* bytes of *info*, which will be in
420 * one of the following formats depending on the eBPF object type
423 * * **struct bpf_prog_info**
424 * * **struct bpf_map_info**
425 * * **struct bpf_btf_info**
426 * * **struct bpf_link_info**
429 * Returns zero on success. On error, -1 is returned and *errno*
430 * is set appropriately.
434 * Obtain information about eBPF programs associated with the
435 * specified *attach_type* hook.
437 * The *target_fd* must be a valid file descriptor for a kernel
438 * object which depends on the attach type of *attach_bpf_fd*:
440 * **BPF_PROG_TYPE_CGROUP_DEVICE**,
441 * **BPF_PROG_TYPE_CGROUP_SKB**,
442 * **BPF_PROG_TYPE_CGROUP_SOCK**,
443 * **BPF_PROG_TYPE_CGROUP_SOCK_ADDR**,
444 * **BPF_PROG_TYPE_CGROUP_SOCKOPT**,
445 * **BPF_PROG_TYPE_CGROUP_SYSCTL**,
446 * **BPF_PROG_TYPE_SOCK_OPS**
448 * Control Group v2 hierarchy with the eBPF controller
449 * enabled. Requires the kernel to be compiled with
450 * **CONFIG_CGROUP_BPF**.
452 * **BPF_PROG_TYPE_FLOW_DISSECTOR**
454 * Network namespace (eg /proc/self/ns/net).
456 * **BPF_PROG_TYPE_LIRC_MODE2**
458 * LIRC device path (eg /dev/lircN). Requires the kernel
459 * to be compiled with **CONFIG_BPF_LIRC_MODE2**.
461 * **BPF_PROG_QUERY** always fetches the number of programs
462 * attached and the *attach_flags* which were used to attach those
463 * programs. Additionally, if *prog_ids* is nonzero and the number
464 * of attached programs is less than *prog_cnt*, populates
465 * *prog_ids* with the eBPF program ids of the programs attached
468 * The following flags may alter the result:
470 * **BPF_F_QUERY_EFFECTIVE**
471 * Only return information regarding programs which are
472 * currently effective at the specified *target_fd*.
475 * Returns zero on success. On error, -1 is returned and *errno*
476 * is set appropriately.
478 * BPF_RAW_TRACEPOINT_OPEN
480 * Attach an eBPF program to a tracepoint *name* to access kernel
481 * internal arguments of the tracepoint in their raw form.
483 * The *prog_fd* must be a valid file descriptor associated with
484 * a loaded eBPF program of type **BPF_PROG_TYPE_RAW_TRACEPOINT**.
486 * No ABI guarantees are made about the content of tracepoint
487 * arguments exposed to the corresponding eBPF program.
489 * Applying **close**\ (2) to the file descriptor returned by
490 * **BPF_RAW_TRACEPOINT_OPEN** will delete the map (but see NOTES).
493 * A new file descriptor (a nonnegative integer), or -1 if an
494 * error occurred (in which case, *errno* is set appropriately).
498 * Verify and load BPF Type Format (BTF) metadata into the kernel,
499 * returning a new file descriptor associated with the metadata.
500 * BTF is described in more detail at
501 * https://www.kernel.org/doc/html/latest/bpf/btf.html.
503 * The *btf* parameter must point to valid memory providing
504 * *btf_size* bytes of BTF binary metadata.
506 * The returned file descriptor can be passed to other **bpf**\ ()
507 * subcommands such as **BPF_PROG_LOAD** or **BPF_MAP_CREATE** to
508 * associate the BTF with those objects.
510 * Similar to **BPF_PROG_LOAD**, **BPF_BTF_LOAD** has optional
511 * parameters to specify a *btf_log_buf*, *btf_log_size* and
512 * *btf_log_level* which allow the kernel to return freeform log
513 * output regarding the BTF verification process.
516 * A new file descriptor (a nonnegative integer), or -1 if an
517 * error occurred (in which case, *errno* is set appropriately).
519 * BPF_BTF_GET_FD_BY_ID
521 * Open a file descriptor for the BPF Type Format (BTF)
522 * corresponding to *btf_id*.
525 * A new file descriptor (a nonnegative integer), or -1 if an
526 * error occurred (in which case, *errno* is set appropriately).
530 * Obtain information about eBPF programs associated with the
531 * target process identified by *pid* and *fd*.
533 * If the *pid* and *fd* are associated with a tracepoint, kprobe
534 * or uprobe perf event, then the *prog_id* and *fd_type* will
535 * be populated with the eBPF program id and file descriptor type
536 * of type **bpf_task_fd_type**. If associated with a kprobe or
537 * uprobe, the *probe_offset* and *probe_addr* will also be
538 * populated. Optionally, if *buf* is provided, then up to
539 * *buf_len* bytes of *buf* will be populated with the name of
540 * the tracepoint, kprobe or uprobe.
542 * The resulting *prog_id* may be introspected in deeper detail
543 * using **BPF_PROG_GET_FD_BY_ID** and **BPF_OBJ_GET_INFO_BY_FD**.
546 * Returns zero on success. On error, -1 is returned and *errno*
547 * is set appropriately.
549 * BPF_MAP_LOOKUP_AND_DELETE_ELEM
551 * Look up an element with the given *key* in the map referred to
552 * by the file descriptor *fd*, and if found, delete the element.
554 * For **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map
555 * types, the *flags* argument needs to be set to 0, but for other
556 * map types, it may be specified as:
559 * Look up and delete the value of a spin-locked map
560 * without returning the lock. This must be specified if
561 * the elements contain a spinlock.
563 * The **BPF_MAP_TYPE_QUEUE** and **BPF_MAP_TYPE_STACK** map types
564 * implement this command as a "pop" operation, deleting the top
565 * element rather than one corresponding to *key*.
566 * The *key* and *key_len* parameters should be zeroed when
567 * issuing this operation for these map types.
569 * This command is only valid for the following map types:
570 * * **BPF_MAP_TYPE_QUEUE**
571 * * **BPF_MAP_TYPE_STACK**
572 * * **BPF_MAP_TYPE_HASH**
573 * * **BPF_MAP_TYPE_PERCPU_HASH**
574 * * **BPF_MAP_TYPE_LRU_HASH**
575 * * **BPF_MAP_TYPE_LRU_PERCPU_HASH**
578 * Returns zero on success. On error, -1 is returned and *errno*
579 * is set appropriately.
583 * Freeze the permissions of the specified map.
585 * Write permissions may be frozen by passing zero *flags*.
586 * Upon success, no future syscall invocations may alter the
587 * map state of *map_fd*. Write operations from eBPF programs
588 * are still possible for a frozen map.
590 * Not supported for maps of type **BPF_MAP_TYPE_STRUCT_OPS**.
593 * Returns zero on success. On error, -1 is returned and *errno*
594 * is set appropriately.
596 * BPF_BTF_GET_NEXT_ID
598 * Fetch the next BPF Type Format (BTF) object currently loaded
601 * Looks for the BTF object with an id greater than *start_id*
602 * and updates *next_id* on success. If no other BTF objects
603 * remain with ids higher than *start_id*, returns -1 and sets
604 * *errno* to **ENOENT**.
607 * Returns zero on success. On error, or when no id remains, -1
608 * is returned and *errno* is set appropriately.
610 * BPF_MAP_LOOKUP_BATCH
612 * Iterate and fetch multiple elements in a map.
614 * Two opaque values are used to manage batch operations,
615 * *in_batch* and *out_batch*. Initially, *in_batch* must be set
616 * to NULL to begin the batched operation. After each subsequent
617 * **BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant
618 * *out_batch* as the *in_batch* for the next operation to
619 * continue iteration from the current point.
621 * The *keys* and *values* are output parameters which must point
622 * to memory large enough to hold *count* items based on the key
623 * and value size of the map *map_fd*. The *keys* buffer must be
624 * of *key_size* * *count*. The *values* buffer must be of
625 * *value_size* * *count*.
627 * The *elem_flags* argument may be specified as one of the
631 * Look up the value of a spin-locked map without
632 * returning the lock. This must be specified if the
633 * elements contain a spinlock.
635 * On success, *count* elements from the map are copied into the
636 * user buffer, with the keys copied into *keys* and the values
637 * copied into the corresponding indices in *values*.
639 * If an error is returned and *errno* is not **EFAULT**, *count*
640 * is set to the number of successfully processed elements.
643 * Returns zero on success. On error, -1 is returned and *errno*
644 * is set appropriately.
646 * May set *errno* to **ENOSPC** to indicate that *keys* or
647 * *values* is too small to dump an entire bucket during
648 * iteration of a hash-based map type.
650 * BPF_MAP_LOOKUP_AND_DELETE_BATCH
652 * Iterate and delete all elements in a map.
654 * This operation has the same behavior as
655 * **BPF_MAP_LOOKUP_BATCH** with two exceptions:
657 * * Every element that is successfully returned is also deleted
658 * from the map. This is at least *count* elements. Note that
659 * *count* is both an input and an output parameter.
660 * * Upon returning with *errno* set to **EFAULT**, up to
661 * *count* elements may be deleted without returning the keys
662 * and values of the deleted elements.
665 * Returns zero on success. On error, -1 is returned and *errno*
666 * is set appropriately.
668 * BPF_MAP_UPDATE_BATCH
670 * Update multiple elements in a map by *key*.
672 * The *keys* and *values* are input parameters which must point
673 * to memory large enough to hold *count* items based on the key
674 * and value size of the map *map_fd*. The *keys* buffer must be
675 * of *key_size* * *count*. The *values* buffer must be of
676 * *value_size* * *count*.
678 * Each element specified in *keys* is sequentially updated to the
679 * value in the corresponding index in *values*. The *in_batch*
680 * and *out_batch* parameters are ignored and should be zeroed.
682 * The *elem_flags* argument should be specified as one of the
686 * Create new elements or update a existing elements.
688 * Create new elements only if they do not exist.
690 * Update existing elements.
692 * Update spin_lock-ed map elements. This must be
693 * specified if the map value contains a spinlock.
695 * On success, *count* elements from the map are updated.
697 * If an error is returned and *errno* is not **EFAULT**, *count*
698 * is set to the number of successfully processed elements.
701 * Returns zero on success. On error, -1 is returned and *errno*
702 * is set appropriately.
704 * May set *errno* to **EINVAL**, **EPERM**, **ENOMEM**, or
705 * **E2BIG**. **E2BIG** indicates that the number of elements in
706 * the map reached the *max_entries* limit specified at map
709 * May set *errno* to one of the following error codes under
710 * specific circumstances:
713 * If *flags* specifies **BPF_NOEXIST** and the element
714 * with *key* already exists in the map.
716 * If *flags* specifies **BPF_EXIST** and the element with
717 * *key* does not exist in the map.
719 * BPF_MAP_DELETE_BATCH
721 * Delete multiple elements in a map by *key*.
723 * The *keys* parameter is an input parameter which must point
724 * to memory large enough to hold *count* items based on the key
725 * size of the map *map_fd*, that is, *key_size* * *count*.
727 * Each element specified in *keys* is sequentially deleted. The
728 * *in_batch*, *out_batch*, and *values* parameters are ignored
729 * and should be zeroed.
731 * The *elem_flags* argument may be specified as one of the
735 * Look up the value of a spin-locked map without
736 * returning the lock. This must be specified if the
737 * elements contain a spinlock.
739 * On success, *count* elements from the map are updated.
741 * If an error is returned and *errno* is not **EFAULT**, *count*
742 * is set to the number of successfully processed elements. If
743 * *errno* is **EFAULT**, up to *count* elements may be been
747 * Returns zero on success. On error, -1 is returned and *errno*
748 * is set appropriately.
752 * Attach an eBPF program to a *target_fd* at the specified
753 * *attach_type* hook and return a file descriptor handle for
757 * A new file descriptor (a nonnegative integer), or -1 if an
758 * error occurred (in which case, *errno* is set appropriately).
762 * Update the eBPF program in the specified *link_fd* to
766 * Returns zero on success. On error, -1 is returned and *errno*
767 * is set appropriately.
769 * BPF_LINK_GET_FD_BY_ID
771 * Open a file descriptor for the eBPF Link corresponding to
775 * A new file descriptor (a nonnegative integer), or -1 if an
776 * error occurred (in which case, *errno* is set appropriately).
778 * BPF_LINK_GET_NEXT_ID
780 * Fetch the next eBPF link currently loaded into the kernel.
782 * Looks for the eBPF link with an id greater than *start_id*
783 * and updates *next_id* on success. If no other eBPF links
784 * remain with ids higher than *start_id*, returns -1 and sets
785 * *errno* to **ENOENT**.
788 * Returns zero on success. On error, or when no id remains, -1
789 * is returned and *errno* is set appropriately.
793 * Enable eBPF runtime statistics gathering.
795 * Runtime statistics gathering for the eBPF runtime is disabled
796 * by default to minimize the corresponding performance overhead.
797 * This command enables statistics globally.
799 * Multiple programs may independently enable statistics.
800 * After gathering the desired statistics, eBPF runtime statistics
801 * may be disabled again by calling **close**\ (2) for the file
802 * descriptor returned by this function. Statistics will only be
803 * disabled system-wide when all outstanding file descriptors
804 * returned by prior calls for this subcommand are closed.
807 * A new file descriptor (a nonnegative integer), or -1 if an
808 * error occurred (in which case, *errno* is set appropriately).
812 * Create an iterator on top of the specified *link_fd* (as
813 * previously created using **BPF_LINK_CREATE**) and return a
814 * file descriptor that can be used to trigger the iteration.
816 * If the resulting file descriptor is pinned to the filesystem
817 * using **BPF_OBJ_PIN**, then subsequent **read**\ (2) syscalls
818 * for that path will trigger the iterator to read kernel state
819 * using the eBPF program attached to *link_fd*.
822 * A new file descriptor (a nonnegative integer), or -1 if an
823 * error occurred (in which case, *errno* is set appropriately).
827 * Forcefully detach the specified *link_fd* from its
828 * corresponding attachment point.
831 * Returns zero on success. On error, -1 is returned and *errno*
832 * is set appropriately.
836 * Bind a map to the lifetime of an eBPF program.
838 * The map identified by *map_fd* is bound to the program
839 * identified by *prog_fd* and only released when *prog_fd* is
840 * released. This may be used in cases where metadata should be
841 * associated with a program which otherwise does not contain any
842 * references to the map (for example, embedded in the eBPF
843 * program instructions).
846 * Returns zero on success. On error, -1 is returned and *errno*
847 * is set appropriately.
850 * eBPF objects (maps and programs) can be shared between processes.
852 * * After **fork**\ (2), the child inherits file descriptors
853 * referring to the same eBPF objects.
854 * * File descriptors referring to eBPF objects can be transferred over
855 * **unix**\ (7) domain sockets.
856 * * File descriptors referring to eBPF objects can be duplicated in the
857 * usual way, using **dup**\ (2) and similar calls.
858 * * File descriptors referring to eBPF objects can be pinned to the
859 * filesystem using the **BPF_OBJ_PIN** command of **bpf**\ (2).
861 * An eBPF object is deallocated only after all file descriptors referring
862 * to the object have been closed and no references remain pinned to the
863 * filesystem or attached (for example, bound to a program or device).
870 BPF_MAP_GET_NEXT_KEY,
877 BPF_PROG_RUN = BPF_PROG_TEST_RUN,
878 BPF_PROG_GET_NEXT_ID,
880 BPF_PROG_GET_FD_BY_ID,
881 BPF_MAP_GET_FD_BY_ID,
882 BPF_OBJ_GET_INFO_BY_FD,
884 BPF_RAW_TRACEPOINT_OPEN,
886 BPF_BTF_GET_FD_BY_ID,
888 BPF_MAP_LOOKUP_AND_DELETE_ELEM,
891 BPF_MAP_LOOKUP_BATCH,
892 BPF_MAP_LOOKUP_AND_DELETE_BATCH,
893 BPF_MAP_UPDATE_BATCH,
894 BPF_MAP_DELETE_BATCH,
897 BPF_LINK_GET_FD_BY_ID,
898 BPF_LINK_GET_NEXT_ID,
909 BPF_MAP_TYPE_PROG_ARRAY,
910 BPF_MAP_TYPE_PERF_EVENT_ARRAY,
911 BPF_MAP_TYPE_PERCPU_HASH,
912 BPF_MAP_TYPE_PERCPU_ARRAY,
913 BPF_MAP_TYPE_STACK_TRACE,
914 BPF_MAP_TYPE_CGROUP_ARRAY,
915 BPF_MAP_TYPE_LRU_HASH,
916 BPF_MAP_TYPE_LRU_PERCPU_HASH,
917 BPF_MAP_TYPE_LPM_TRIE,
918 BPF_MAP_TYPE_ARRAY_OF_MAPS,
919 BPF_MAP_TYPE_HASH_OF_MAPS,
921 BPF_MAP_TYPE_SOCKMAP,
924 BPF_MAP_TYPE_SOCKHASH,
925 BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED,
926 /* BPF_MAP_TYPE_CGROUP_STORAGE is available to bpf programs attaching
927 * to a cgroup. The newer BPF_MAP_TYPE_CGRP_STORAGE is available to
928 * both cgroup-attached and other progs and supports all functionality
929 * provided by BPF_MAP_TYPE_CGROUP_STORAGE. So mark
930 * BPF_MAP_TYPE_CGROUP_STORAGE deprecated.
932 BPF_MAP_TYPE_CGROUP_STORAGE = BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED,
933 BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
934 BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE,
937 BPF_MAP_TYPE_SK_STORAGE,
938 BPF_MAP_TYPE_DEVMAP_HASH,
939 BPF_MAP_TYPE_STRUCT_OPS,
940 BPF_MAP_TYPE_RINGBUF,
941 BPF_MAP_TYPE_INODE_STORAGE,
942 BPF_MAP_TYPE_TASK_STORAGE,
943 BPF_MAP_TYPE_BLOOM_FILTER,
944 BPF_MAP_TYPE_USER_RINGBUF,
945 BPF_MAP_TYPE_CGRP_STORAGE,
948 /* Note that tracing related programs such as
949 * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT}
950 * are not subject to a stable API since kernel internal data
951 * structures can change from release to release and may
952 * therefore break existing tracing BPF programs. Tracing BPF
953 * programs correspond to /a/ specific kernel which is to be
954 * analyzed, and not /a/ specific kernel /and/ all future ones.
957 BPF_PROG_TYPE_UNSPEC,
958 BPF_PROG_TYPE_SOCKET_FILTER,
959 BPF_PROG_TYPE_KPROBE,
960 BPF_PROG_TYPE_SCHED_CLS,
961 BPF_PROG_TYPE_SCHED_ACT,
962 BPF_PROG_TYPE_TRACEPOINT,
964 BPF_PROG_TYPE_PERF_EVENT,
965 BPF_PROG_TYPE_CGROUP_SKB,
966 BPF_PROG_TYPE_CGROUP_SOCK,
967 BPF_PROG_TYPE_LWT_IN,
968 BPF_PROG_TYPE_LWT_OUT,
969 BPF_PROG_TYPE_LWT_XMIT,
970 BPF_PROG_TYPE_SOCK_OPS,
971 BPF_PROG_TYPE_SK_SKB,
972 BPF_PROG_TYPE_CGROUP_DEVICE,
973 BPF_PROG_TYPE_SK_MSG,
974 BPF_PROG_TYPE_RAW_TRACEPOINT,
975 BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
976 BPF_PROG_TYPE_LWT_SEG6LOCAL,
977 BPF_PROG_TYPE_LIRC_MODE2,
978 BPF_PROG_TYPE_SK_REUSEPORT,
979 BPF_PROG_TYPE_FLOW_DISSECTOR,
980 BPF_PROG_TYPE_CGROUP_SYSCTL,
981 BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE,
982 BPF_PROG_TYPE_CGROUP_SOCKOPT,
983 BPF_PROG_TYPE_TRACING,
984 BPF_PROG_TYPE_STRUCT_OPS,
987 BPF_PROG_TYPE_SK_LOOKUP,
988 BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */
989 BPF_PROG_TYPE_NETFILTER,
992 enum bpf_attach_type {
993 BPF_CGROUP_INET_INGRESS,
994 BPF_CGROUP_INET_EGRESS,
995 BPF_CGROUP_INET_SOCK_CREATE,
997 BPF_SK_SKB_STREAM_PARSER,
998 BPF_SK_SKB_STREAM_VERDICT,
1001 BPF_CGROUP_INET4_BIND,
1002 BPF_CGROUP_INET6_BIND,
1003 BPF_CGROUP_INET4_CONNECT,
1004 BPF_CGROUP_INET6_CONNECT,
1005 BPF_CGROUP_INET4_POST_BIND,
1006 BPF_CGROUP_INET6_POST_BIND,
1007 BPF_CGROUP_UDP4_SENDMSG,
1008 BPF_CGROUP_UDP6_SENDMSG,
1012 BPF_CGROUP_UDP4_RECVMSG,
1013 BPF_CGROUP_UDP6_RECVMSG,
1014 BPF_CGROUP_GETSOCKOPT,
1015 BPF_CGROUP_SETSOCKOPT,
1022 BPF_CGROUP_INET4_GETPEERNAME,
1023 BPF_CGROUP_INET6_GETPEERNAME,
1024 BPF_CGROUP_INET4_GETSOCKNAME,
1025 BPF_CGROUP_INET6_GETSOCKNAME,
1027 BPF_CGROUP_INET_SOCK_RELEASE,
1032 BPF_SK_REUSEPORT_SELECT,
1033 BPF_SK_REUSEPORT_SELECT_OR_MIGRATE,
1035 BPF_TRACE_KPROBE_MULTI,
1041 __MAX_BPF_ATTACH_TYPE
1044 #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
1046 enum bpf_link_type {
1047 BPF_LINK_TYPE_UNSPEC = 0,
1048 BPF_LINK_TYPE_RAW_TRACEPOINT = 1,
1049 BPF_LINK_TYPE_TRACING = 2,
1050 BPF_LINK_TYPE_CGROUP = 3,
1051 BPF_LINK_TYPE_ITER = 4,
1052 BPF_LINK_TYPE_NETNS = 5,
1053 BPF_LINK_TYPE_XDP = 6,
1054 BPF_LINK_TYPE_PERF_EVENT = 7,
1055 BPF_LINK_TYPE_KPROBE_MULTI = 8,
1056 BPF_LINK_TYPE_STRUCT_OPS = 9,
1057 BPF_LINK_TYPE_NETFILTER = 10,
1058 BPF_LINK_TYPE_TCX = 11,
1062 enum bpf_perf_event_type {
1063 BPF_PERF_EVENT_UNSPEC = 0,
1064 BPF_PERF_EVENT_UPROBE = 1,
1065 BPF_PERF_EVENT_URETPROBE = 2,
1066 BPF_PERF_EVENT_KPROBE = 3,
1067 BPF_PERF_EVENT_KRETPROBE = 4,
1068 BPF_PERF_EVENT_TRACEPOINT = 5,
1069 BPF_PERF_EVENT_EVENT = 6,
1072 /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command
1074 * NONE(default): No further bpf programs allowed in the subtree.
1076 * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program,
1077 * the program in this cgroup yields to sub-cgroup program.
1079 * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program,
1080 * that cgroup program gets run in addition to the program in this cgroup.
1082 * Only one program is allowed to be attached to a cgroup with
1083 * NONE or BPF_F_ALLOW_OVERRIDE flag.
1084 * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will
1085 * release old program and attach the new one. Attach flags has to match.
1087 * Multiple programs are allowed to be attached to a cgroup with
1088 * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order
1089 * (those that were attached first, run first)
1090 * The programs of sub-cgroup are executed first, then programs of
1091 * this cgroup and then programs of parent cgroup.
1092 * When children program makes decision (like picking TCP CA or sock bind)
1093 * parent program has a chance to override it.
1095 * With BPF_F_ALLOW_MULTI a new program is added to the end of the list of
1096 * programs for a cgroup. Though it's possible to replace an old program at
1097 * any position by also specifying BPF_F_REPLACE flag and position itself in
1098 * replace_bpf_fd attribute. Old program at this position will be released.
1100 * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups.
1101 * A cgroup with NONE doesn't allow any programs in sub-cgroups.
1103 * cgrp1 (MULTI progs A, B) ->
1104 * cgrp2 (OVERRIDE prog C) ->
1105 * cgrp3 (MULTI prog D) ->
1106 * cgrp4 (OVERRIDE prog E) ->
1107 * cgrp5 (NONE prog F)
1108 * the event in cgrp5 triggers execution of F,D,A,B in that order.
1109 * if prog F is detached, the execution is E,D,A,B
1110 * if prog F and D are detached, the execution is E,A,B
1111 * if prog F, E and D are detached, the execution is C,A,B
1113 * All eligible programs are executed regardless of return code from
1116 #define BPF_F_ALLOW_OVERRIDE (1U << 0)
1117 #define BPF_F_ALLOW_MULTI (1U << 1)
1118 /* Generic attachment flags. */
1119 #define BPF_F_REPLACE (1U << 2)
1120 #define BPF_F_BEFORE (1U << 3)
1121 #define BPF_F_AFTER (1U << 4)
1122 #define BPF_F_ID (1U << 5)
1123 #define BPF_F_LINK BPF_F_LINK /* 1 << 13 */
1125 /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
1126 * verifier will perform strict alignment checking as if the kernel
1127 * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
1128 * and NET_IP_ALIGN defined to 2.
1130 #define BPF_F_STRICT_ALIGNMENT (1U << 0)
1132 /* If BPF_F_ANY_ALIGNMENT is used in BPF_PROG_LOAD command, the
1133 * verifier will allow any alignment whatsoever. On platforms
1134 * with strict alignment requirements for loads ands stores (such
1135 * as sparc and mips) the verifier validates that all loads and
1136 * stores provably follow this requirement. This flag turns that
1137 * checking and enforcement off.
1139 * It is mostly used for testing when we want to validate the
1140 * context and memory access aspects of the verifier, but because
1141 * of an unaligned access the alignment check would trigger before
1142 * the one we are interested in.
1144 #define BPF_F_ANY_ALIGNMENT (1U << 1)
1146 /* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose.
1147 * Verifier does sub-register def/use analysis and identifies instructions whose
1148 * def only matters for low 32-bit, high 32-bit is never referenced later
1149 * through implicit zero extension. Therefore verifier notifies JIT back-ends
1150 * that it is safe to ignore clearing high 32-bit for these instructions. This
1151 * saves some back-ends a lot of code-gen. However such optimization is not
1152 * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends
1153 * hence hasn't used verifier's analysis result. But, we really want to have a
1154 * way to be able to verify the correctness of the described optimization on
1155 * x86_64 on which testsuites are frequently exercised.
1157 * So, this flag is introduced. Once it is set, verifier will randomize high
1158 * 32-bit for those instructions who has been identified as safe to ignore them.
1159 * Then, if verifier is not doing correct analysis, such randomization will
1160 * regress tests to expose bugs.
1162 #define BPF_F_TEST_RND_HI32 (1U << 2)
1164 /* The verifier internal test flag. Behavior is undefined */
1165 #define BPF_F_TEST_STATE_FREQ (1U << 3)
1167 /* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will
1168 * restrict map and helper usage for such programs. Sleepable BPF programs can
1169 * only be attached to hooks where kernel execution context allows sleeping.
1170 * Such programs are allowed to use helpers that may sleep like
1171 * bpf_copy_from_user().
1173 #define BPF_F_SLEEPABLE (1U << 4)
1175 /* If BPF_F_XDP_HAS_FRAGS is used in BPF_PROG_LOAD command, the loaded program
1176 * fully support xdp frags.
1178 #define BPF_F_XDP_HAS_FRAGS (1U << 5)
1180 /* If BPF_F_XDP_DEV_BOUND_ONLY is used in BPF_PROG_LOAD command, the loaded
1181 * program becomes device-bound but can access XDP metadata.
1183 #define BPF_F_XDP_DEV_BOUND_ONLY (1U << 6)
1185 /* link_create.kprobe_multi.flags used in LINK_CREATE command for
1186 * BPF_TRACE_KPROBE_MULTI attach type to create return probe.
1188 #define BPF_F_KPROBE_MULTI_RETURN (1U << 0)
1190 /* When BPF ldimm64's insn[0].src_reg != 0 then this can have
1191 * the following extensions:
1193 * insn[0].src_reg: BPF_PSEUDO_MAP_[FD|IDX]
1194 * insn[0].imm: map fd or fd_idx
1198 * ldimm64 rewrite: address of map
1199 * verifier type: CONST_PTR_TO_MAP
1201 #define BPF_PSEUDO_MAP_FD 1
1202 #define BPF_PSEUDO_MAP_IDX 5
1204 /* insn[0].src_reg: BPF_PSEUDO_MAP_[IDX_]VALUE
1205 * insn[0].imm: map fd or fd_idx
1206 * insn[1].imm: offset into value
1209 * ldimm64 rewrite: address of map[0]+offset
1210 * verifier type: PTR_TO_MAP_VALUE
1212 #define BPF_PSEUDO_MAP_VALUE 2
1213 #define BPF_PSEUDO_MAP_IDX_VALUE 6
1215 /* insn[0].src_reg: BPF_PSEUDO_BTF_ID
1216 * insn[0].imm: kernel btd id of VAR
1220 * ldimm64 rewrite: address of the kernel variable
1221 * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var
1224 #define BPF_PSEUDO_BTF_ID 3
1225 /* insn[0].src_reg: BPF_PSEUDO_FUNC
1226 * insn[0].imm: insn offset to the func
1230 * ldimm64 rewrite: address of the function
1231 * verifier type: PTR_TO_FUNC.
1233 #define BPF_PSEUDO_FUNC 4
1235 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative
1236 * offset to another bpf function
1238 #define BPF_PSEUDO_CALL 1
1239 /* when bpf_call->src_reg == BPF_PSEUDO_KFUNC_CALL,
1240 * bpf_call->imm == btf_id of a BTF_KIND_FUNC in the running kernel
1242 #define BPF_PSEUDO_KFUNC_CALL 2
1244 /* flags for BPF_MAP_UPDATE_ELEM command */
1246 BPF_ANY = 0, /* create new element or update existing */
1247 BPF_NOEXIST = 1, /* create new element if it didn't exist */
1248 BPF_EXIST = 2, /* update existing element */
1249 BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */
1252 /* flags for BPF_MAP_CREATE command */
1254 BPF_F_NO_PREALLOC = (1U << 0),
1255 /* Instead of having one common LRU list in the
1256 * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
1257 * which can scale and perform better.
1258 * Note, the LRU nodes (including free nodes) cannot be moved
1259 * across different LRU lists.
1261 BPF_F_NO_COMMON_LRU = (1U << 1),
1262 /* Specify numa node during map creation */
1263 BPF_F_NUMA_NODE = (1U << 2),
1265 /* Flags for accessing BPF object from syscall side. */
1266 BPF_F_RDONLY = (1U << 3),
1267 BPF_F_WRONLY = (1U << 4),
1269 /* Flag for stack_map, store build_id+offset instead of pointer */
1270 BPF_F_STACK_BUILD_ID = (1U << 5),
1272 /* Zero-initialize hash function seed. This should only be used for testing. */
1273 BPF_F_ZERO_SEED = (1U << 6),
1275 /* Flags for accessing BPF object from program side. */
1276 BPF_F_RDONLY_PROG = (1U << 7),
1277 BPF_F_WRONLY_PROG = (1U << 8),
1279 /* Clone map from listener for newly accepted socket */
1280 BPF_F_CLONE = (1U << 9),
1282 /* Enable memory-mapping BPF map */
1283 BPF_F_MMAPABLE = (1U << 10),
1285 /* Share perf_event among processes */
1286 BPF_F_PRESERVE_ELEMS = (1U << 11),
1288 /* Create a map that is suitable to be an inner map with dynamic max entries */
1289 BPF_F_INNER_MAP = (1U << 12),
1291 /* Create a map that will be registered/unregesitered by the backed bpf_link */
1292 BPF_F_LINK = (1U << 13),
1294 /* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */
1295 BPF_F_PATH_FD = (1U << 14),
1298 /* Flags for BPF_PROG_QUERY. */
1300 /* Query effective (directly attached + inherited from ancestor cgroups)
1301 * programs that will be executed for events within a cgroup.
1302 * attach_flags with this flag are always returned 0.
1304 #define BPF_F_QUERY_EFFECTIVE (1U << 0)
1306 /* Flags for BPF_PROG_TEST_RUN */
1308 /* If set, run the test on the cpu specified by bpf_attr.test.cpu */
1309 #define BPF_F_TEST_RUN_ON_CPU (1U << 0)
1310 /* If set, XDP frames will be transmitted after processing */
1311 #define BPF_F_TEST_XDP_LIVE_FRAMES (1U << 1)
1313 /* type for BPF_ENABLE_STATS */
1314 enum bpf_stats_type {
1315 /* enabled run_time_ns and run_cnt */
1316 BPF_STATS_RUN_TIME = 0,
1319 enum bpf_stack_build_id_status {
1320 /* user space need an empty entry to identify end of a trace */
1321 BPF_STACK_BUILD_ID_EMPTY = 0,
1322 /* with valid build_id and offset */
1323 BPF_STACK_BUILD_ID_VALID = 1,
1324 /* couldn't get build_id, fallback to ip */
1325 BPF_STACK_BUILD_ID_IP = 2,
1328 #define BPF_BUILD_ID_SIZE 20
1329 struct bpf_stack_build_id {
1331 unsigned char build_id[BPF_BUILD_ID_SIZE];
1338 #define BPF_OBJ_NAME_LEN 16U
1341 struct { /* anonymous struct used by BPF_MAP_CREATE command */
1342 __u32 map_type; /* one of enum bpf_map_type */
1343 __u32 key_size; /* size of key in bytes */
1344 __u32 value_size; /* size of value in bytes */
1345 __u32 max_entries; /* max number of entries in a map */
1346 __u32 map_flags; /* BPF_MAP_CREATE related
1347 * flags defined above.
1349 __u32 inner_map_fd; /* fd pointing to the inner map */
1350 __u32 numa_node; /* numa node (effective only if
1351 * BPF_F_NUMA_NODE is set).
1353 char map_name[BPF_OBJ_NAME_LEN];
1354 __u32 map_ifindex; /* ifindex of netdev to create on */
1355 __u32 btf_fd; /* fd pointing to a BTF type data */
1356 __u32 btf_key_type_id; /* BTF type_id of the key */
1357 __u32 btf_value_type_id; /* BTF type_id of the value */
1358 __u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel-
1359 * struct stored as the
1362 /* Any per-map-type extra fields
1364 * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the
1365 * number of hash functions (if 0, the bloom filter will default
1366 * to using 5 hash functions).
1371 struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
1375 __aligned_u64 value;
1376 __aligned_u64 next_key;
1381 struct { /* struct used by BPF_MAP_*_BATCH commands */
1382 __aligned_u64 in_batch; /* start batch,
1383 * NULL to start from beginning
1385 __aligned_u64 out_batch; /* output: next start batch */
1387 __aligned_u64 values;
1388 __u32 count; /* input/output:
1389 * input: # of key/value
1391 * output: # of filled elements
1398 struct { /* anonymous struct used by BPF_PROG_LOAD command */
1399 __u32 prog_type; /* one of enum bpf_prog_type */
1401 __aligned_u64 insns;
1402 __aligned_u64 license;
1403 __u32 log_level; /* verbosity level of verifier */
1404 __u32 log_size; /* size of user buffer */
1405 __aligned_u64 log_buf; /* user supplied buffer */
1406 __u32 kern_version; /* not used */
1408 char prog_name[BPF_OBJ_NAME_LEN];
1409 __u32 prog_ifindex; /* ifindex of netdev to prep for */
1410 /* For some prog types expected attach type must be known at
1411 * load time to verify attach type specific parts of prog
1412 * (context accesses, allowed helpers, etc).
1414 __u32 expected_attach_type;
1415 __u32 prog_btf_fd; /* fd pointing to BTF type data */
1416 __u32 func_info_rec_size; /* userspace bpf_func_info size */
1417 __aligned_u64 func_info; /* func info */
1418 __u32 func_info_cnt; /* number of bpf_func_info records */
1419 __u32 line_info_rec_size; /* userspace bpf_line_info size */
1420 __aligned_u64 line_info; /* line info */
1421 __u32 line_info_cnt; /* number of bpf_line_info records */
1422 __u32 attach_btf_id; /* in-kernel BTF type id to attach to */
1424 /* valid prog_fd to attach to bpf prog */
1425 __u32 attach_prog_fd;
1426 /* or valid module BTF object fd or 0 to attach to vmlinux */
1427 __u32 attach_btf_obj_fd;
1429 __u32 core_relo_cnt; /* number of bpf_core_relo */
1430 __aligned_u64 fd_array; /* array of FDs */
1431 __aligned_u64 core_relos;
1432 __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */
1433 /* output: actual total log contents size (including termintaing zero).
1434 * It could be both larger than original log_size (if log was
1435 * truncated), or smaller (if log buffer wasn't filled completely).
1437 __u32 log_true_size;
1440 struct { /* anonymous struct used by BPF_OBJ_* commands */
1441 __aligned_u64 pathname;
1444 /* Same as dirfd in openat() syscall; see openat(2)
1445 * manpage for details of path FD and pathname semantics;
1446 * path_fd should accompanied by BPF_F_PATH_FD flag set in
1447 * file_flags field, otherwise it should be set to zero;
1448 * if BPF_F_PATH_FD flag is not set, AT_FDCWD is assumed.
1453 struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
1455 __u32 target_fd; /* target object to attach to or ... */
1456 __u32 target_ifindex; /* target ifindex */
1458 __u32 attach_bpf_fd;
1461 __u32 replace_bpf_fd;
1466 __u64 expected_revision;
1469 struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */
1472 __u32 data_size_in; /* input: len of data_in */
1473 __u32 data_size_out; /* input/output: len of data_out
1474 * returns ENOSPC if data_out
1477 __aligned_u64 data_in;
1478 __aligned_u64 data_out;
1481 __u32 ctx_size_in; /* input: len of ctx_in */
1482 __u32 ctx_size_out; /* input/output: len of ctx_out
1483 * returns ENOSPC if ctx_out
1486 __aligned_u64 ctx_in;
1487 __aligned_u64 ctx_out;
1493 struct { /* anonymous struct used by BPF_*_GET_*_ID */
1505 struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
1511 struct { /* anonymous struct used by BPF_PROG_QUERY command */
1513 __u32 target_fd; /* target object to query or ... */
1514 __u32 target_ifindex; /* target ifindex */
1519 __aligned_u64 prog_ids;
1525 /* output: per-program attach_flags.
1526 * not allowed to be set during effective query.
1528 __aligned_u64 prog_attach_flags;
1529 __aligned_u64 link_ids;
1530 __aligned_u64 link_attach_flags;
1534 struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */
1539 struct { /* anonymous struct for BPF_BTF_LOAD */
1541 __aligned_u64 btf_log_buf;
1544 __u32 btf_log_level;
1545 /* output: actual total log contents size (including termintaing zero).
1546 * It could be both larger than original log_size (if log was
1547 * truncated), or smaller (if log buffer wasn't filled completely).
1549 __u32 btf_log_true_size;
1553 __u32 pid; /* input: pid */
1554 __u32 fd; /* input: fd */
1555 __u32 flags; /* input: flags */
1556 __u32 buf_len; /* input/output: buf len */
1557 __aligned_u64 buf; /* input/output:
1558 * tp_name for tracepoint
1560 * filename for uprobe
1562 __u32 prog_id; /* output: prod_id */
1563 __u32 fd_type; /* output: BPF_FD_TYPE_* */
1564 __u64 probe_offset; /* output: probe_offset */
1565 __u64 probe_addr; /* output: probe_addr */
1568 struct { /* struct used by BPF_LINK_CREATE command */
1570 __u32 prog_fd; /* eBPF program to attach */
1571 __u32 map_fd; /* struct_ops to attach */
1574 __u32 target_fd; /* target object to attach to or ... */
1575 __u32 target_ifindex; /* target ifindex */
1577 __u32 attach_type; /* attach type */
1578 __u32 flags; /* extra flags */
1580 __u32 target_btf_id; /* btf_id of target to attach to */
1582 __aligned_u64 iter_info; /* extra bpf_iter_link_info */
1583 __u32 iter_info_len; /* iter_info length */
1586 /* black box user-provided value passed through
1587 * to BPF program at the execution time and
1588 * accessible through bpf_get_attach_cookie() BPF helper
1596 __aligned_u64 addrs;
1597 __aligned_u64 cookies;
1600 /* this is overlaid with the target_btf_id above. */
1601 __u32 target_btf_id;
1602 /* black box user-provided value passed through
1603 * to BPF program at the execution time and
1604 * accessible through bpf_get_attach_cookie() BPF helper
1619 __u64 expected_revision;
1624 struct { /* struct used by BPF_LINK_UPDATE command */
1625 __u32 link_fd; /* link fd */
1627 /* new program fd to update link with */
1629 /* new struct_ops map fd to update link with */
1632 __u32 flags; /* extra flags */
1634 /* expected link's program fd; is specified only if
1635 * BPF_F_REPLACE flag is set in flags.
1638 /* expected link's map fd; is specified only
1639 * if BPF_F_REPLACE flag is set.
1649 struct { /* struct used by BPF_ENABLE_STATS command */
1653 struct { /* struct used by BPF_ITER_CREATE command */
1658 struct { /* struct used by BPF_PROG_BIND_MAP command */
1661 __u32 flags; /* extra flags */
1664 } __attribute__((aligned(8)));
1666 /* The description below is an attempt at providing documentation to eBPF
1667 * developers about the multiple available eBPF helper functions. It can be
1668 * parsed and used to produce a manual page. The workflow is the following,
1669 * and requires the rst2man utility:
1671 * $ ./scripts/bpf_doc.py \
1672 * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst
1673 * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7
1674 * $ man /tmp/bpf-helpers.7
1676 * Note that in order to produce this external documentation, some RST
1677 * formatting is used in the descriptions to get "bold" and "italics" in
1678 * manual pages. Also note that the few trailing white spaces are
1679 * intentional, removing them would break paragraphs for rst2man.
1681 * Start of BPF helper function descriptions:
1683 * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
1685 * Perform a lookup in *map* for an entry associated to *key*.
1687 * Map value associated to *key*, or **NULL** if no entry was
1690 * long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
1692 * Add or update the value of the entry associated to *key* in
1693 * *map* with *value*. *flags* is one of:
1696 * The entry for *key* must not exist in the map.
1698 * The entry for *key* must already exist in the map.
1700 * No condition on the existence of the entry for *key*.
1702 * Flag value **BPF_NOEXIST** cannot be used for maps of types
1703 * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all
1704 * elements always exist), the helper would return an error.
1706 * 0 on success, or a negative error in case of failure.
1708 * long bpf_map_delete_elem(struct bpf_map *map, const void *key)
1710 * Delete entry with *key* from *map*.
1712 * 0 on success, or a negative error in case of failure.
1714 * long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr)
1716 * For tracing programs, safely attempt to read *size* bytes from
1717 * kernel space address *unsafe_ptr* and store the data in *dst*.
1719 * Generally, use **bpf_probe_read_user**\ () or
1720 * **bpf_probe_read_kernel**\ () instead.
1722 * 0 on success, or a negative error in case of failure.
1724 * u64 bpf_ktime_get_ns(void)
1726 * Return the time elapsed since system boot, in nanoseconds.
1727 * Does not include time the system was suspended.
1728 * See: **clock_gettime**\ (**CLOCK_MONOTONIC**)
1732 * long bpf_trace_printk(const char *fmt, u32 fmt_size, ...)
1734 * This helper is a "printk()-like" facility for debugging. It
1735 * prints a message defined by format *fmt* (of size *fmt_size*)
1736 * to file *\/sys/kernel/tracing/trace* from TraceFS, if
1737 * available. It can take up to three additional **u64**
1738 * arguments (as an eBPF helpers, the total number of arguments is
1741 * Each time the helper is called, it appends a line to the trace.
1742 * Lines are discarded while *\/sys/kernel/tracing/trace* is
1743 * open, use *\/sys/kernel/tracing/trace_pipe* to avoid this.
1744 * The format of the trace is customizable, and the exact output
1745 * one will get depends on the options set in
1746 * *\/sys/kernel/tracing/trace_options* (see also the
1747 * *README* file under the same directory). However, it usually
1748 * defaults to something like:
1752 * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg>
1756 * * ``telnet`` is the name of the current task.
1757 * * ``470`` is the PID of the current task.
1758 * * ``001`` is the CPU number on which the task is
1760 * * In ``.N..``, each character refers to a set of
1761 * options (whether irqs are enabled, scheduling
1762 * options, whether hard/softirqs are running, level of
1763 * preempt_disabled respectively). **N** means that
1764 * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED**
1766 * * ``419421.045894`` is a timestamp.
1767 * * ``0x00000001`` is a fake value used by BPF for the
1768 * instruction pointer register.
1769 * * ``<formatted msg>`` is the message formatted with
1772 * The conversion specifiers supported by *fmt* are similar, but
1773 * more limited than for printk(). They are **%d**, **%i**,
1774 * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
1775 * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
1776 * of field, padding with zeroes, etc.) is available, and the
1777 * helper will return **-EINVAL** (but print nothing) if it
1778 * encounters an unknown specifier.
1780 * Also, note that **bpf_trace_printk**\ () is slow, and should
1781 * only be used for debugging purposes. For this reason, a notice
1782 * block (spanning several lines) is printed to kernel logs and
1783 * states that the helper should not be used "for production use"
1784 * the first time this helper is used (or more precisely, when
1785 * **trace_printk**\ () buffers are allocated). For passing values
1786 * to user space, perf events should be preferred.
1788 * The number of bytes written to the buffer, or a negative error
1789 * in case of failure.
1791 * u32 bpf_get_prandom_u32(void)
1793 * Get a pseudo-random number.
1795 * From a security point of view, this helper uses its own
1796 * pseudo-random internal state, and cannot be used to infer the
1797 * seed of other random functions in the kernel. However, it is
1798 * essential to note that the generator used by the helper is not
1799 * cryptographically secure.
1801 * A random 32-bit unsigned value.
1803 * u32 bpf_get_smp_processor_id(void)
1805 * Get the SMP (symmetric multiprocessing) processor id. Note that
1806 * all programs run with migration disabled, which means that the
1807 * SMP processor id is stable during all the execution of the
1810 * The SMP id of the processor running the program.
1812 * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags)
1814 * Store *len* bytes from address *from* into the packet
1815 * associated to *skb*, at *offset*. *flags* are a combination of
1816 * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the
1817 * checksum for the packet after storing the bytes) and
1818 * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\
1819 * **->swhash** and *skb*\ **->l4hash** to 0).
1821 * A call to this helper is susceptible to change the underlying
1822 * packet buffer. Therefore, at load time, all checks on pointers
1823 * previously done by the verifier are invalidated and must be
1824 * performed again, if the helper is used in combination with
1825 * direct packet access.
1827 * 0 on success, or a negative error in case of failure.
1829 * long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size)
1831 * Recompute the layer 3 (e.g. IP) checksum for the packet
1832 * associated to *skb*. Computation is incremental, so the helper
1833 * must know the former value of the header field that was
1834 * modified (*from*), the new value of this field (*to*), and the
1835 * number of bytes (2 or 4) for this field, stored in *size*.
1836 * Alternatively, it is possible to store the difference between
1837 * the previous and the new values of the header field in *to*, by
1838 * setting *from* and *size* to 0. For both methods, *offset*
1839 * indicates the location of the IP checksum within the packet.
1841 * This helper works in combination with **bpf_csum_diff**\ (),
1842 * which does not update the checksum in-place, but offers more
1843 * flexibility and can handle sizes larger than 2 or 4 for the
1844 * checksum to update.
1846 * A call to this helper is susceptible to change the underlying
1847 * packet buffer. Therefore, at load time, all checks on pointers
1848 * previously done by the verifier are invalidated and must be
1849 * performed again, if the helper is used in combination with
1850 * direct packet access.
1852 * 0 on success, or a negative error in case of failure.
1854 * long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags)
1856 * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the
1857 * packet associated to *skb*. Computation is incremental, so the
1858 * helper must know the former value of the header field that was
1859 * modified (*from*), the new value of this field (*to*), and the
1860 * number of bytes (2 or 4) for this field, stored on the lowest
1861 * four bits of *flags*. Alternatively, it is possible to store
1862 * the difference between the previous and the new values of the
1863 * header field in *to*, by setting *from* and the four lowest
1864 * bits of *flags* to 0. For both methods, *offset* indicates the
1865 * location of the IP checksum within the packet. In addition to
1866 * the size of the field, *flags* can be added (bitwise OR) actual
1867 * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left
1868 * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and
1869 * for updates resulting in a null checksum the value is set to
1870 * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates
1871 * the checksum is to be computed against a pseudo-header.
1873 * This helper works in combination with **bpf_csum_diff**\ (),
1874 * which does not update the checksum in-place, but offers more
1875 * flexibility and can handle sizes larger than 2 or 4 for the
1876 * checksum to update.
1878 * A call to this helper is susceptible to change the underlying
1879 * packet buffer. Therefore, at load time, all checks on pointers
1880 * previously done by the verifier are invalidated and must be
1881 * performed again, if the helper is used in combination with
1882 * direct packet access.
1884 * 0 on success, or a negative error in case of failure.
1886 * long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index)
1888 * This special helper is used to trigger a "tail call", or in
1889 * other words, to jump into another eBPF program. The same stack
1890 * frame is used (but values on stack and in registers for the
1891 * caller are not accessible to the callee). This mechanism allows
1892 * for program chaining, either for raising the maximum number of
1893 * available eBPF instructions, or to execute given programs in
1894 * conditional blocks. For security reasons, there is an upper
1895 * limit to the number of successive tail calls that can be
1898 * Upon call of this helper, the program attempts to jump into a
1899 * program referenced at index *index* in *prog_array_map*, a
1900 * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes
1901 * *ctx*, a pointer to the context.
1903 * If the call succeeds, the kernel immediately runs the first
1904 * instruction of the new program. This is not a function call,
1905 * and it never returns to the previous program. If the call
1906 * fails, then the helper has no effect, and the caller continues
1907 * to run its subsequent instructions. A call can fail if the
1908 * destination program for the jump does not exist (i.e. *index*
1909 * is superior to the number of entries in *prog_array_map*), or
1910 * if the maximum number of tail calls has been reached for this
1911 * chain of programs. This limit is defined in the kernel by the
1912 * macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
1913 * which is currently set to 33.
1915 * 0 on success, or a negative error in case of failure.
1917 * long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags)
1919 * Clone and redirect the packet associated to *skb* to another
1920 * net device of index *ifindex*. Both ingress and egress
1921 * interfaces can be used for redirection. The **BPF_F_INGRESS**
1922 * value in *flags* is used to make the distinction (ingress path
1923 * is selected if the flag is present, egress path otherwise).
1924 * This is the only flag supported for now.
1926 * In comparison with **bpf_redirect**\ () helper,
1927 * **bpf_clone_redirect**\ () has the associated cost of
1928 * duplicating the packet buffer, but this can be executed out of
1929 * the eBPF program. Conversely, **bpf_redirect**\ () is more
1930 * efficient, but it is handled through an action code where the
1931 * redirection happens only after the eBPF program has returned.
1933 * A call to this helper is susceptible to change the underlying
1934 * packet buffer. Therefore, at load time, all checks on pointers
1935 * previously done by the verifier are invalidated and must be
1936 * performed again, if the helper is used in combination with
1937 * direct packet access.
1939 * 0 on success, or a negative error in case of failure.
1941 * u64 bpf_get_current_pid_tgid(void)
1943 * Get the current pid and tgid.
1945 * A 64-bit integer containing the current tgid and pid, and
1947 * *current_task*\ **->tgid << 32 \|**
1948 * *current_task*\ **->pid**.
1950 * u64 bpf_get_current_uid_gid(void)
1952 * Get the current uid and gid.
1954 * A 64-bit integer containing the current GID and UID, and
1955 * created as such: *current_gid* **<< 32 \|** *current_uid*.
1957 * long bpf_get_current_comm(void *buf, u32 size_of_buf)
1959 * Copy the **comm** attribute of the current task into *buf* of
1960 * *size_of_buf*. The **comm** attribute contains the name of
1961 * the executable (excluding the path) for the current task. The
1962 * *size_of_buf* must be strictly positive. On success, the
1963 * helper makes sure that the *buf* is NUL-terminated. On failure,
1964 * it is filled with zeroes.
1966 * 0 on success, or a negative error in case of failure.
1968 * u32 bpf_get_cgroup_classid(struct sk_buff *skb)
1970 * Retrieve the classid for the current task, i.e. for the net_cls
1971 * cgroup to which *skb* belongs.
1973 * This helper can be used on TC egress path, but not on ingress.
1975 * The net_cls cgroup provides an interface to tag network packets
1976 * based on a user-provided identifier for all traffic coming from
1977 * the tasks belonging to the related cgroup. See also the related
1978 * kernel documentation, available from the Linux sources in file
1979 * *Documentation/admin-guide/cgroup-v1/net_cls.rst*.
1981 * The Linux kernel has two versions for cgroups: there are
1982 * cgroups v1 and cgroups v2. Both are available to users, who can
1983 * use a mixture of them, but note that the net_cls cgroup is for
1984 * cgroup v1 only. This makes it incompatible with BPF programs
1985 * run on cgroups, which is a cgroup-v2-only feature (a socket can
1986 * only hold data for one version of cgroups at a time).
1988 * This helper is only available is the kernel was compiled with
1989 * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to
1990 * "**y**" or to "**m**".
1992 * The classid, or 0 for the default unconfigured classid.
1994 * long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
1996 * Push a *vlan_tci* (VLAN tag control information) of protocol
1997 * *vlan_proto* to the packet associated to *skb*, then update
1998 * the checksum. Note that if *vlan_proto* is different from
1999 * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to
2000 * be **ETH_P_8021Q**.
2002 * A call to this helper is susceptible to change the underlying
2003 * packet buffer. Therefore, at load time, all checks on pointers
2004 * previously done by the verifier are invalidated and must be
2005 * performed again, if the helper is used in combination with
2006 * direct packet access.
2008 * 0 on success, or a negative error in case of failure.
2010 * long bpf_skb_vlan_pop(struct sk_buff *skb)
2012 * Pop a VLAN header from the packet associated to *skb*.
2014 * A call to this helper is susceptible to change the underlying
2015 * packet buffer. Therefore, at load time, all checks on pointers
2016 * previously done by the verifier are invalidated and must be
2017 * performed again, if the helper is used in combination with
2018 * direct packet access.
2020 * 0 on success, or a negative error in case of failure.
2022 * long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
2024 * Get tunnel metadata. This helper takes a pointer *key* to an
2025 * empty **struct bpf_tunnel_key** of **size**, that will be
2026 * filled with tunnel metadata for the packet associated to *skb*.
2027 * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which
2028 * indicates that the tunnel is based on IPv6 protocol instead of
2031 * The **struct bpf_tunnel_key** is an object that generalizes the
2032 * principal parameters used by various tunneling protocols into a
2033 * single struct. This way, it can be used to easily make a
2034 * decision based on the contents of the encapsulation header,
2035 * "summarized" in this struct. In particular, it holds the IP
2036 * address of the remote end (IPv4 or IPv6, depending on the case)
2037 * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also,
2038 * this struct exposes the *key*\ **->tunnel_id**, which is
2039 * generally mapped to a VNI (Virtual Network Identifier), making
2040 * it programmable together with the **bpf_skb_set_tunnel_key**\
2043 * Let's imagine that the following code is part of a program
2044 * attached to the TC ingress interface, on one end of a GRE
2045 * tunnel, and is supposed to filter out all messages coming from
2046 * remote ends with IPv4 address other than 10.0.0.1:
2051 * struct bpf_tunnel_key key = {};
2053 * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
2055 * return TC_ACT_SHOT; // drop packet
2057 * if (key.remote_ipv4 != 0x0a000001)
2058 * return TC_ACT_SHOT; // drop packet
2060 * return TC_ACT_OK; // accept packet
2062 * This interface can also be used with all encapsulation devices
2063 * that can operate in "collect metadata" mode: instead of having
2064 * one network device per specific configuration, the "collect
2065 * metadata" mode only requires a single device where the
2066 * configuration can be extracted from this helper.
2068 * This can be used together with various tunnels such as VXLan,
2069 * Geneve, GRE or IP in IP (IPIP).
2071 * 0 on success, or a negative error in case of failure.
2073 * long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags)
2075 * Populate tunnel metadata for packet associated to *skb.* The
2076 * tunnel metadata is set to the contents of *key*, of *size*. The
2077 * *flags* can be set to a combination of the following values:
2079 * **BPF_F_TUNINFO_IPV6**
2080 * Indicate that the tunnel is based on IPv6 protocol
2082 * **BPF_F_ZERO_CSUM_TX**
2083 * For IPv4 packets, add a flag to tunnel metadata
2084 * indicating that checksum computation should be skipped
2085 * and checksum set to zeroes.
2086 * **BPF_F_DONT_FRAGMENT**
2087 * Add a flag to tunnel metadata indicating that the
2088 * packet should not be fragmented.
2089 * **BPF_F_SEQ_NUMBER**
2090 * Add a flag to tunnel metadata indicating that a
2091 * sequence number should be added to tunnel header before
2092 * sending the packet. This flag was added for GRE
2093 * encapsulation, but might be used with other protocols
2094 * as well in the future.
2095 * **BPF_F_NO_TUNNEL_KEY**
2096 * Add a flag to tunnel metadata indicating that no tunnel
2097 * key should be set in the resulting tunnel header.
2099 * Here is a typical usage on the transmit path:
2103 * struct bpf_tunnel_key key;
2105 * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
2106 * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0);
2108 * See also the description of the **bpf_skb_get_tunnel_key**\ ()
2109 * helper for additional information.
2111 * 0 on success, or a negative error in case of failure.
2113 * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags)
2115 * Read the value of a perf event counter. This helper relies on a
2116 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of
2117 * the perf event counter is selected when *map* is updated with
2118 * perf event file descriptors. The *map* is an array whose size
2119 * is the number of available CPUs, and each cell contains a value
2120 * relative to one CPU. The value to retrieve is indicated by
2121 * *flags*, that contains the index of the CPU to look up, masked
2122 * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
2123 * **BPF_F_CURRENT_CPU** to indicate that the value for the
2124 * current CPU should be retrieved.
2126 * Note that before Linux 4.13, only hardware perf event can be
2129 * Also, be aware that the newer helper
2130 * **bpf_perf_event_read_value**\ () is recommended over
2131 * **bpf_perf_event_read**\ () in general. The latter has some ABI
2132 * quirks where error and counter value are used as a return code
2133 * (which is wrong to do since ranges may overlap). This issue is
2134 * fixed with **bpf_perf_event_read_value**\ (), which at the same
2135 * time provides more features over the **bpf_perf_event_read**\
2136 * () interface. Please refer to the description of
2137 * **bpf_perf_event_read_value**\ () for details.
2139 * The value of the perf event counter read from the map, or a
2140 * negative error code in case of failure.
2142 * long bpf_redirect(u32 ifindex, u64 flags)
2144 * Redirect the packet to another net device of index *ifindex*.
2145 * This helper is somewhat similar to **bpf_clone_redirect**\
2146 * (), except that the packet is not cloned, which provides
2147 * increased performance.
2149 * Except for XDP, both ingress and egress interfaces can be used
2150 * for redirection. The **BPF_F_INGRESS** value in *flags* is used
2151 * to make the distinction (ingress path is selected if the flag
2152 * is present, egress path otherwise). Currently, XDP only
2153 * supports redirection to the egress interface, and accepts no
2156 * The same effect can also be attained with the more generic
2157 * **bpf_redirect_map**\ (), which uses a BPF map to store the
2158 * redirect target instead of providing it directly to the helper.
2160 * For XDP, the helper returns **XDP_REDIRECT** on success or
2161 * **XDP_ABORTED** on error. For other program types, the values
2162 * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on
2165 * u32 bpf_get_route_realm(struct sk_buff *skb)
2167 * Retrieve the realm or the route, that is to say the
2168 * **tclassid** field of the destination for the *skb*. The
2169 * identifier retrieved is a user-provided tag, similar to the
2170 * one used with the net_cls cgroup (see description for
2171 * **bpf_get_cgroup_classid**\ () helper), but here this tag is
2172 * held by a route (a destination entry), not by a task.
2174 * Retrieving this identifier works with the clsact TC egress hook
2175 * (see also **tc-bpf(8)**), or alternatively on conventional
2176 * classful egress qdiscs, but not on TC ingress path. In case of
2177 * clsact TC egress hook, this has the advantage that, internally,
2178 * the destination entry has not been dropped yet in the transmit
2179 * path. Therefore, the destination entry does not need to be
2180 * artificially held via **netif_keep_dst**\ () for a classful
2181 * qdisc until the *skb* is freed.
2183 * This helper is available only if the kernel was compiled with
2184 * **CONFIG_IP_ROUTE_CLASSID** configuration option.
2186 * The realm of the route for the packet associated to *skb*, or 0
2187 * if none was found.
2189 * long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
2191 * Write raw *data* blob into a special BPF perf event held by
2192 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
2193 * event must have the following attributes: **PERF_SAMPLE_RAW**
2194 * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
2195 * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
2197 * The *flags* are used to indicate the index in *map* for which
2198 * the value must be put, masked with **BPF_F_INDEX_MASK**.
2199 * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
2200 * to indicate that the index of the current CPU core should be
2203 * The value to write, of *size*, is passed through eBPF stack and
2204 * pointed by *data*.
2206 * The context of the program *ctx* needs also be passed to the
2209 * On user space, a program willing to read the values needs to
2210 * call **perf_event_open**\ () on the perf event (either for
2211 * one or for all CPUs) and to store the file descriptor into the
2212 * *map*. This must be done before the eBPF program can send data
2213 * into it. An example is available in file
2214 * *samples/bpf/trace_output_user.c* in the Linux kernel source
2215 * tree (the eBPF program counterpart is in
2216 * *samples/bpf/trace_output_kern.c*).
2218 * **bpf_perf_event_output**\ () achieves better performance
2219 * than **bpf_trace_printk**\ () for sharing data with user
2220 * space, and is much better suitable for streaming data from eBPF
2223 * Note that this helper is not restricted to tracing use cases
2224 * and can be used with programs attached to TC or XDP as well,
2225 * where it allows for passing data to user space listeners. Data
2228 * * Only custom structs,
2229 * * Only the packet payload, or
2230 * * A combination of both.
2232 * 0 on success, or a negative error in case of failure.
2234 * long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len)
2236 * This helper was provided as an easy way to load data from a
2237 * packet. It can be used to load *len* bytes from *offset* from
2238 * the packet associated to *skb*, into the buffer pointed by
2241 * Since Linux 4.7, usage of this helper has mostly been replaced
2242 * by "direct packet access", enabling packet data to be
2243 * manipulated with *skb*\ **->data** and *skb*\ **->data_end**
2244 * pointing respectively to the first byte of packet data and to
2245 * the byte after the last byte of packet data. However, it
2246 * remains useful if one wishes to read large quantities of data
2247 * at once from a packet into the eBPF stack.
2249 * 0 on success, or a negative error in case of failure.
2251 * long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags)
2253 * Walk a user or a kernel stack and return its id. To achieve
2254 * this, the helper needs *ctx*, which is a pointer to the context
2255 * on which the tracing program is executed, and a pointer to a
2256 * *map* of type **BPF_MAP_TYPE_STACK_TRACE**.
2258 * The last argument, *flags*, holds the number of stack frames to
2259 * skip (from 0 to 255), masked with
2260 * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
2261 * a combination of the following flags:
2263 * **BPF_F_USER_STACK**
2264 * Collect a user space stack instead of a kernel stack.
2265 * **BPF_F_FAST_STACK_CMP**
2266 * Compare stacks by hash only.
2267 * **BPF_F_REUSE_STACKID**
2268 * If two different stacks hash into the same *stackid*,
2269 * discard the old one.
2271 * The stack id retrieved is a 32 bit long integer handle which
2272 * can be further combined with other data (including other stack
2273 * ids) and used as a key into maps. This can be useful for
2274 * generating a variety of graphs (such as flame graphs or off-cpu
2277 * For walking a stack, this helper is an improvement over
2278 * **bpf_probe_read**\ (), which can be used with unrolled loops
2279 * but is not efficient and consumes a lot of eBPF instructions.
2280 * Instead, **bpf_get_stackid**\ () can collect up to
2281 * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that
2282 * this limit can be controlled with the **sysctl** program, and
2283 * that it should be manually increased in order to profile long
2284 * user stacks (such as stacks for Java programs). To do so, use:
2288 * # sysctl kernel.perf_event_max_stack=<new value>
2290 * The positive or null stack id on success, or a negative error
2291 * in case of failure.
2293 * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed)
2295 * Compute a checksum difference, from the raw buffer pointed by
2296 * *from*, of length *from_size* (that must be a multiple of 4),
2297 * towards the raw buffer pointed by *to*, of size *to_size*
2298 * (same remark). An optional *seed* can be added to the value
2299 * (this can be cascaded, the seed may come from a previous call
2302 * This is flexible enough to be used in several ways:
2304 * * With *from_size* == 0, *to_size* > 0 and *seed* set to
2305 * checksum, it can be used when pushing new data.
2306 * * With *from_size* > 0, *to_size* == 0 and *seed* set to
2307 * checksum, it can be used when removing data from a packet.
2308 * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it
2309 * can be used to compute a diff. Note that *from_size* and
2310 * *to_size* do not need to be equal.
2312 * This helper can be used in combination with
2313 * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to
2314 * which one can feed in the difference computed with
2315 * **bpf_csum_diff**\ ().
2317 * The checksum result, or a negative error code in case of
2320 * long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
2322 * Retrieve tunnel options metadata for the packet associated to
2323 * *skb*, and store the raw tunnel option data to the buffer *opt*
2326 * This helper can be used with encapsulation devices that can
2327 * operate in "collect metadata" mode (please refer to the related
2328 * note in the description of **bpf_skb_get_tunnel_key**\ () for
2329 * more details). A particular example where this can be used is
2330 * in combination with the Geneve encapsulation protocol, where it
2331 * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper)
2332 * and retrieving arbitrary TLVs (Type-Length-Value headers) from
2333 * the eBPF program. This allows for full customization of these
2336 * The size of the option data retrieved.
2338 * long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
2340 * Set tunnel options metadata for the packet associated to *skb*
2341 * to the option data contained in the raw buffer *opt* of *size*.
2343 * See also the description of the **bpf_skb_get_tunnel_opt**\ ()
2344 * helper for additional information.
2346 * 0 on success, or a negative error in case of failure.
2348 * long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags)
2350 * Change the protocol of the *skb* to *proto*. Currently
2351 * supported are transition from IPv4 to IPv6, and from IPv6 to
2352 * IPv4. The helper takes care of the groundwork for the
2353 * transition, including resizing the socket buffer. The eBPF
2354 * program is expected to fill the new headers, if any, via
2355 * **skb_store_bytes**\ () and to recompute the checksums with
2356 * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\
2357 * (). The main case for this helper is to perform NAT64
2358 * operations out of an eBPF program.
2360 * Internally, the GSO type is marked as dodgy so that headers are
2361 * checked and segments are recalculated by the GSO/GRO engine.
2362 * The size for GSO target is adapted as well.
2364 * All values for *flags* are reserved for future usage, and must
2367 * A call to this helper is susceptible to change the underlying
2368 * packet buffer. Therefore, at load time, all checks on pointers
2369 * previously done by the verifier are invalidated and must be
2370 * performed again, if the helper is used in combination with
2371 * direct packet access.
2373 * 0 on success, or a negative error in case of failure.
2375 * long bpf_skb_change_type(struct sk_buff *skb, u32 type)
2377 * Change the packet type for the packet associated to *skb*. This
2378 * comes down to setting *skb*\ **->pkt_type** to *type*, except
2379 * the eBPF program does not have a write access to *skb*\
2380 * **->pkt_type** beside this helper. Using a helper here allows
2381 * for graceful handling of errors.
2383 * The major use case is to change incoming *skb*s to
2384 * **PACKET_HOST** in a programmatic way instead of having to
2385 * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for
2388 * Note that *type* only allows certain values. At this time, they
2393 * **PACKET_BROADCAST**
2394 * Send packet to all.
2395 * **PACKET_MULTICAST**
2396 * Send packet to group.
2397 * **PACKET_OTHERHOST**
2398 * Send packet to someone else.
2400 * 0 on success, or a negative error in case of failure.
2402 * long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index)
2404 * Check whether *skb* is a descendant of the cgroup2 held by
2405 * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
2407 * The return value depends on the result of the test, and can be:
2409 * * 0, if the *skb* failed the cgroup2 descendant test.
2410 * * 1, if the *skb* succeeded the cgroup2 descendant test.
2411 * * A negative error code, if an error occurred.
2413 * u32 bpf_get_hash_recalc(struct sk_buff *skb)
2415 * Retrieve the hash of the packet, *skb*\ **->hash**. If it is
2416 * not set, in particular if the hash was cleared due to mangling,
2417 * recompute this hash. Later accesses to the hash can be done
2418 * directly with *skb*\ **->hash**.
2420 * Calling **bpf_set_hash_invalid**\ (), changing a packet
2421 * prototype with **bpf_skb_change_proto**\ (), or calling
2422 * **bpf_skb_store_bytes**\ () with the
2423 * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear
2424 * the hash and to trigger a new computation for the next call to
2425 * **bpf_get_hash_recalc**\ ().
2429 * u64 bpf_get_current_task(void)
2431 * Get the current task.
2433 * A pointer to the current task struct.
2435 * long bpf_probe_write_user(void *dst, const void *src, u32 len)
2437 * Attempt in a safe way to write *len* bytes from the buffer
2438 * *src* to *dst* in memory. It only works for threads that are in
2439 * user context, and *dst* must be a valid user space address.
2441 * This helper should not be used to implement any kind of
2442 * security mechanism because of TOC-TOU attacks, but rather to
2443 * debug, divert, and manipulate execution of semi-cooperative
2446 * Keep in mind that this feature is meant for experiments, and it
2447 * has a risk of crashing the system and running programs.
2448 * Therefore, when an eBPF program using this helper is attached,
2449 * a warning including PID and process name is printed to kernel
2452 * 0 on success, or a negative error in case of failure.
2454 * long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index)
2456 * Check whether the probe is being run is the context of a given
2457 * subset of the cgroup2 hierarchy. The cgroup2 to test is held by
2458 * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
2460 * The return value depends on the result of the test, and can be:
2462 * * 1, if current task belongs to the cgroup2.
2463 * * 0, if current task does not belong to the cgroup2.
2464 * * A negative error code, if an error occurred.
2466 * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
2468 * Resize (trim or grow) the packet associated to *skb* to the
2469 * new *len*. The *flags* are reserved for future usage, and must
2472 * The basic idea is that the helper performs the needed work to
2473 * change the size of the packet, then the eBPF program rewrites
2474 * the rest via helpers like **bpf_skb_store_bytes**\ (),
2475 * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ ()
2476 * and others. This helper is a slow path utility intended for
2477 * replies with control messages. And because it is targeted for
2478 * slow path, the helper itself can afford to be slow: it
2479 * implicitly linearizes, unclones and drops offloads from the
2482 * A call to this helper is susceptible to change the underlying
2483 * packet buffer. Therefore, at load time, all checks on pointers
2484 * previously done by the verifier are invalidated and must be
2485 * performed again, if the helper is used in combination with
2486 * direct packet access.
2488 * 0 on success, or a negative error in case of failure.
2490 * long bpf_skb_pull_data(struct sk_buff *skb, u32 len)
2492 * Pull in non-linear data in case the *skb* is non-linear and not
2493 * all of *len* are part of the linear section. Make *len* bytes
2494 * from *skb* readable and writable. If a zero value is passed for
2495 * *len*, then all bytes in the linear part of *skb* will be made
2496 * readable and writable.
2498 * This helper is only needed for reading and writing with direct
2501 * For direct packet access, testing that offsets to access
2502 * are within packet boundaries (test on *skb*\ **->data_end**) is
2503 * susceptible to fail if offsets are invalid, or if the requested
2504 * data is in non-linear parts of the *skb*. On failure the
2505 * program can just bail out, or in the case of a non-linear
2506 * buffer, use a helper to make the data available. The
2507 * **bpf_skb_load_bytes**\ () helper is a first solution to access
2508 * the data. Another one consists in using **bpf_skb_pull_data**
2509 * to pull in once the non-linear parts, then retesting and
2510 * eventually access the data.
2512 * At the same time, this also makes sure the *skb* is uncloned,
2513 * which is a necessary condition for direct write. As this needs
2514 * to be an invariant for the write part only, the verifier
2515 * detects writes and adds a prologue that is calling
2516 * **bpf_skb_pull_data()** to effectively unclone the *skb* from
2517 * the very beginning in case it is indeed cloned.
2519 * A call to this helper is susceptible to change the underlying
2520 * packet buffer. Therefore, at load time, all checks on pointers
2521 * previously done by the verifier are invalidated and must be
2522 * performed again, if the helper is used in combination with
2523 * direct packet access.
2525 * 0 on success, or a negative error in case of failure.
2527 * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum)
2529 * Add the checksum *csum* into *skb*\ **->csum** in case the
2530 * driver has supplied a checksum for the entire packet into that
2531 * field. Return an error otherwise. This helper is intended to be
2532 * used in combination with **bpf_csum_diff**\ (), in particular
2533 * when the checksum needs to be updated after data has been
2534 * written into the packet through direct packet access.
2536 * The checksum on success, or a negative error code in case of
2539 * void bpf_set_hash_invalid(struct sk_buff *skb)
2541 * Invalidate the current *skb*\ **->hash**. It can be used after
2542 * mangling on headers through direct packet access, in order to
2543 * indicate that the hash is outdated and to trigger a
2544 * recalculation the next time the kernel tries to access this
2545 * hash or when the **bpf_get_hash_recalc**\ () helper is called.
2549 * long bpf_get_numa_node_id(void)
2551 * Return the id of the current NUMA node. The primary use case
2552 * for this helper is the selection of sockets for the local NUMA
2553 * node, when the program is attached to sockets using the
2554 * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**),
2555 * but the helper is also available to other eBPF program types,
2556 * similarly to **bpf_get_smp_processor_id**\ ().
2558 * The id of current NUMA node.
2560 * long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags)
2562 * Grows headroom of packet associated to *skb* and adjusts the
2563 * offset of the MAC header accordingly, adding *len* bytes of
2564 * space. It automatically extends and reallocates memory as
2567 * This helper can be used on a layer 3 *skb* to push a MAC header
2568 * for redirection into a layer 2 device.
2570 * All values for *flags* are reserved for future usage, and must
2573 * A call to this helper is susceptible to change the underlying
2574 * packet buffer. Therefore, at load time, all checks on pointers
2575 * previously done by the verifier are invalidated and must be
2576 * performed again, if the helper is used in combination with
2577 * direct packet access.
2579 * 0 on success, or a negative error in case of failure.
2581 * long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta)
2583 * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that
2584 * it is possible to use a negative value for *delta*. This helper
2585 * can be used to prepare the packet for pushing or popping
2588 * A call to this helper is susceptible to change the underlying
2589 * packet buffer. Therefore, at load time, all checks on pointers
2590 * previously done by the verifier are invalidated and must be
2591 * performed again, if the helper is used in combination with
2592 * direct packet access.
2594 * 0 on success, or a negative error in case of failure.
2596 * long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr)
2598 * Copy a NUL terminated string from an unsafe kernel address
2599 * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for
2602 * Generally, use **bpf_probe_read_user_str**\ () or
2603 * **bpf_probe_read_kernel_str**\ () instead.
2605 * On success, the strictly positive length of the string,
2606 * including the trailing NUL character. On error, a negative
2609 * u64 bpf_get_socket_cookie(struct sk_buff *skb)
2611 * If the **struct sk_buff** pointed by *skb* has a known socket,
2612 * retrieve the cookie (generated by the kernel) of this socket.
2613 * If no cookie has been set yet, generate a new cookie. Once
2614 * generated, the socket cookie remains stable for the life of the
2615 * socket. This helper can be useful for monitoring per socket
2616 * networking traffic statistics as it provides a global socket
2617 * identifier that can be assumed unique.
2619 * A 8-byte long unique number on success, or 0 if the socket
2620 * field is missing inside *skb*.
2622 * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx)
2624 * Equivalent to bpf_get_socket_cookie() helper that accepts
2625 * *skb*, but gets socket from **struct bpf_sock_addr** context.
2627 * A 8-byte long unique number.
2629 * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
2631 * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
2632 * *skb*, but gets socket from **struct bpf_sock_ops** context.
2634 * A 8-byte long unique number.
2636 * u64 bpf_get_socket_cookie(struct sock *sk)
2638 * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts
2639 * *sk*, but gets socket from a BTF **struct sock**. This helper
2640 * also works for sleepable programs.
2642 * A 8-byte long unique number or 0 if *sk* is NULL.
2644 * u32 bpf_get_socket_uid(struct sk_buff *skb)
2646 * Get the owner UID of the socked associated to *skb*.
2648 * The owner UID of the socket associated to *skb*. If the socket
2649 * is **NULL**, or if it is not a full socket (i.e. if it is a
2650 * time-wait or a request socket instead), **overflowuid** value
2651 * is returned (note that **overflowuid** might also be the actual
2652 * UID value for the socket).
2654 * long bpf_set_hash(struct sk_buff *skb, u32 hash)
2656 * Set the full hash for *skb* (set the field *skb*\ **->hash**)
2661 * long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen)
2663 * Emulate a call to **setsockopt()** on the socket associated to
2664 * *bpf_socket*, which must be a full socket. The *level* at
2665 * which the option resides and the name *optname* of the option
2666 * must be specified, see **setsockopt(2)** for more information.
2667 * The option value of length *optlen* is pointed by *optval*.
2669 * *bpf_socket* should be one of the following:
2671 * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
2672 * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
2673 * and **BPF_CGROUP_INET6_CONNECT**.
2675 * This helper actually implements a subset of **setsockopt()**.
2676 * It supports the following *level*\ s:
2678 * * **SOL_SOCKET**, which supports the following *optname*\ s:
2679 * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**,
2680 * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**,
2681 * **SO_BINDTODEVICE**, **SO_KEEPALIVE**, **SO_REUSEADDR**,
2682 * **SO_REUSEPORT**, **SO_BINDTOIFINDEX**, **SO_TXREHASH**.
2683 * * **IPPROTO_TCP**, which supports the following *optname*\ s:
2684 * **TCP_CONGESTION**, **TCP_BPF_IW**,
2685 * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**,
2686 * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**,
2687 * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**,
2688 * **TCP_NODELAY**, **TCP_MAXSEG**, **TCP_WINDOW_CLAMP**,
2689 * **TCP_THIN_LINEAR_TIMEOUTS**, **TCP_BPF_DELACK_MAX**,
2690 * **TCP_BPF_RTO_MIN**.
2691 * * **IPPROTO_IP**, which supports *optname* **IP_TOS**.
2692 * * **IPPROTO_IPV6**, which supports the following *optname*\ s:
2693 * **IPV6_TCLASS**, **IPV6_AUTOFLOWLABEL**.
2695 * 0 on success, or a negative error in case of failure.
2697 * long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags)
2699 * Grow or shrink the room for data in the packet associated to
2700 * *skb* by *len_diff*, and according to the selected *mode*.
2702 * By default, the helper will reset any offloaded checksum
2703 * indicator of the skb to CHECKSUM_NONE. This can be avoided
2704 * by the following flag:
2706 * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded
2707 * checksum data of the skb to CHECKSUM_NONE.
2709 * There are two supported modes at this time:
2711 * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
2712 * (room space is added or removed between the layer 2 and
2715 * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
2716 * (room space is added or removed between the layer 3 and
2719 * The following flags are supported at this time:
2721 * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size.
2722 * Adjusting mss in this way is not allowed for datagrams.
2724 * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**,
2725 * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**:
2726 * Any new space is reserved to hold a tunnel header.
2727 * Configure skb offsets and other fields accordingly.
2729 * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**,
2730 * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**:
2731 * Use with ENCAP_L3 flags to further specify the tunnel type.
2733 * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*):
2734 * Use with ENCAP_L3/L4 flags to further specify the tunnel
2735 * type; *len* is the length of the inner MAC header.
2737 * * **BPF_F_ADJ_ROOM_ENCAP_L2_ETH**:
2738 * Use with BPF_F_ADJ_ROOM_ENCAP_L2 flag to further specify the
2739 * L2 type as Ethernet.
2741 * * **BPF_F_ADJ_ROOM_DECAP_L3_IPV4**,
2742 * **BPF_F_ADJ_ROOM_DECAP_L3_IPV6**:
2743 * Indicate the new IP header version after decapsulating the outer
2744 * IP header. Used when the inner and outer IP versions are different.
2746 * A call to this helper is susceptible to change the underlying
2747 * packet buffer. Therefore, at load time, all checks on pointers
2748 * previously done by the verifier are invalidated and must be
2749 * performed again, if the helper is used in combination with
2750 * direct packet access.
2752 * 0 on success, or a negative error in case of failure.
2754 * long bpf_redirect_map(struct bpf_map *map, u64 key, u64 flags)
2756 * Redirect the packet to the endpoint referenced by *map* at
2757 * index *key*. Depending on its type, this *map* can contain
2758 * references to net devices (for forwarding packets through other
2759 * ports), or to CPUs (for redirecting XDP frames to another CPU;
2760 * but this is only implemented for native XDP (with driver
2761 * support) as of this writing).
2763 * The lower two bits of *flags* are used as the return code if
2764 * the map lookup fails. This is so that the return value can be
2765 * one of the XDP program return codes up to **XDP_TX**, as chosen
2766 * by the caller. The higher bits of *flags* can be set to
2767 * BPF_F_BROADCAST or BPF_F_EXCLUDE_INGRESS as defined below.
2769 * With BPF_F_BROADCAST the packet will be broadcasted to all the
2770 * interfaces in the map, with BPF_F_EXCLUDE_INGRESS the ingress
2771 * interface will be excluded when do broadcasting.
2773 * See also **bpf_redirect**\ (), which only supports redirecting
2774 * to an ifindex, but doesn't require a map to do so.
2776 * **XDP_REDIRECT** on success, or the value of the two lower bits
2777 * of the *flags* argument on error.
2779 * long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
2781 * Redirect the packet to the socket referenced by *map* (of type
2782 * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
2783 * egress interfaces can be used for redirection. The
2784 * **BPF_F_INGRESS** value in *flags* is used to make the
2785 * distinction (ingress path is selected if the flag is present,
2786 * egress path otherwise). This is the only flag supported for now.
2788 * **SK_PASS** on success, or **SK_DROP** on error.
2790 * long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
2792 * Add an entry to, or update a *map* referencing sockets. The
2793 * *skops* is used as a new value for the entry associated to
2794 * *key*. *flags* is one of:
2797 * The entry for *key* must not exist in the map.
2799 * The entry for *key* must already exist in the map.
2801 * No condition on the existence of the entry for *key*.
2803 * If the *map* has eBPF programs (parser and verdict), those will
2804 * be inherited by the socket being added. If the socket is
2805 * already attached to eBPF programs, this results in an error.
2807 * 0 on success, or a negative error in case of failure.
2809 * long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta)
2811 * Adjust the address pointed by *xdp_md*\ **->data_meta** by
2812 * *delta* (which can be positive or negative). Note that this
2813 * operation modifies the address stored in *xdp_md*\ **->data**,
2814 * so the latter must be loaded only after the helper has been
2817 * The use of *xdp_md*\ **->data_meta** is optional and programs
2818 * are not required to use it. The rationale is that when the
2819 * packet is processed with XDP (e.g. as DoS filter), it is
2820 * possible to push further meta data along with it before passing
2821 * to the stack, and to give the guarantee that an ingress eBPF
2822 * program attached as a TC classifier on the same device can pick
2823 * this up for further post-processing. Since TC works with socket
2824 * buffers, it remains possible to set from XDP the **mark** or
2825 * **priority** pointers, or other pointers for the socket buffer.
2826 * Having this scratch space generic and programmable allows for
2827 * more flexibility as the user is free to store whatever meta
2830 * A call to this helper is susceptible to change the underlying
2831 * packet buffer. Therefore, at load time, all checks on pointers
2832 * previously done by the verifier are invalidated and must be
2833 * performed again, if the helper is used in combination with
2834 * direct packet access.
2836 * 0 on success, or a negative error in case of failure.
2838 * long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size)
2840 * Read the value of a perf event counter, and store it into *buf*
2841 * of size *buf_size*. This helper relies on a *map* of type
2842 * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event
2843 * counter is selected when *map* is updated with perf event file
2844 * descriptors. The *map* is an array whose size is the number of
2845 * available CPUs, and each cell contains a value relative to one
2846 * CPU. The value to retrieve is indicated by *flags*, that
2847 * contains the index of the CPU to look up, masked with
2848 * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
2849 * **BPF_F_CURRENT_CPU** to indicate that the value for the
2850 * current CPU should be retrieved.
2852 * This helper behaves in a way close to
2853 * **bpf_perf_event_read**\ () helper, save that instead of
2854 * just returning the value observed, it fills the *buf*
2855 * structure. This allows for additional data to be retrieved: in
2856 * particular, the enabled and running times (in *buf*\
2857 * **->enabled** and *buf*\ **->running**, respectively) are
2858 * copied. In general, **bpf_perf_event_read_value**\ () is
2859 * recommended over **bpf_perf_event_read**\ (), which has some
2860 * ABI issues and provides fewer functionalities.
2862 * These values are interesting, because hardware PMU (Performance
2863 * Monitoring Unit) counters are limited resources. When there are
2864 * more PMU based perf events opened than available counters,
2865 * kernel will multiplex these events so each event gets certain
2866 * percentage (but not all) of the PMU time. In case that
2867 * multiplexing happens, the number of samples or counter value
2868 * will not reflect the case compared to when no multiplexing
2869 * occurs. This makes comparison between different runs difficult.
2870 * Typically, the counter value should be normalized before
2871 * comparing to other experiments. The usual normalization is done
2876 * normalized_counter = counter * t_enabled / t_running
2878 * Where t_enabled is the time enabled for event and t_running is
2879 * the time running for event since last normalization. The
2880 * enabled and running times are accumulated since the perf event
2881 * open. To achieve scaling factor between two invocations of an
2882 * eBPF program, users can use CPU id as the key (which is
2883 * typical for perf array usage model) to remember the previous
2884 * value and do the calculation inside the eBPF program.
2886 * 0 on success, or a negative error in case of failure.
2888 * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size)
2890 * For an eBPF program attached to a perf event, retrieve the
2891 * value of the event counter associated to *ctx* and store it in
2892 * the structure pointed by *buf* and of size *buf_size*. Enabled
2893 * and running times are also stored in the structure (see
2894 * description of helper **bpf_perf_event_read_value**\ () for
2897 * 0 on success, or a negative error in case of failure.
2899 * long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen)
2901 * Emulate a call to **getsockopt()** on the socket associated to
2902 * *bpf_socket*, which must be a full socket. The *level* at
2903 * which the option resides and the name *optname* of the option
2904 * must be specified, see **getsockopt(2)** for more information.
2905 * The retrieved value is stored in the structure pointed by
2906 * *opval* and of length *optlen*.
2908 * *bpf_socket* should be one of the following:
2910 * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**.
2911 * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT**
2912 * and **BPF_CGROUP_INET6_CONNECT**.
2914 * This helper actually implements a subset of **getsockopt()**.
2915 * It supports the same set of *optname*\ s that is supported by
2916 * the **bpf_setsockopt**\ () helper. The exceptions are
2917 * **TCP_BPF_*** is **bpf_setsockopt**\ () only and
2918 * **TCP_SAVED_SYN** is **bpf_getsockopt**\ () only.
2920 * 0 on success, or a negative error in case of failure.
2922 * long bpf_override_return(struct pt_regs *regs, u64 rc)
2924 * Used for error injection, this helper uses kprobes to override
2925 * the return value of the probed function, and to set it to *rc*.
2926 * The first argument is the context *regs* on which the kprobe
2929 * This helper works by setting the PC (program counter)
2930 * to an override function which is run in place of the original
2931 * probed function. This means the probed function is not run at
2932 * all. The replacement function just returns with the required
2935 * This helper has security implications, and thus is subject to
2936 * restrictions. It is only available if the kernel was compiled
2937 * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration
2938 * option, and in this case it only works on functions tagged with
2939 * **ALLOW_ERROR_INJECTION** in the kernel code.
2941 * Also, the helper is only available for the architectures having
2942 * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing,
2943 * x86 architecture is the only one to support this feature.
2947 * long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval)
2949 * Attempt to set the value of the **bpf_sock_ops_cb_flags** field
2950 * for the full TCP socket associated to *bpf_sock_ops* to
2953 * The primary use of this field is to determine if there should
2954 * be calls to eBPF programs of type
2955 * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP
2956 * code. A program of the same type can change its value, per
2957 * connection and as necessary, when the connection is
2958 * established. This field is directly accessible for reading, but
2959 * this helper must be used for updates in order to return an
2960 * error if an eBPF program tries to set a callback that is not
2961 * supported in the current kernel.
2963 * *argval* is a flag array which can combine these flags:
2965 * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
2966 * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
2967 * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
2968 * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT)
2970 * Therefore, this function can be used to clear a callback flag by
2971 * setting the appropriate bit to zero. e.g. to disable the RTO
2974 * **bpf_sock_ops_cb_flags_set(bpf_sock,**
2975 * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)**
2977 * Here are some examples of where one could call such eBPF
2981 * * When a packet is retransmitted.
2982 * * When the connection terminates.
2983 * * When a packet is sent.
2984 * * When a packet is received.
2986 * Code **-EINVAL** if the socket is not a full TCP socket;
2987 * otherwise, a positive number containing the bits that could not
2988 * be set is returned (which comes down to 0 if all bits were set
2991 * long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
2993 * This helper is used in programs implementing policies at the
2994 * socket level. If the message *msg* is allowed to pass (i.e. if
2995 * the verdict eBPF program returns **SK_PASS**), redirect it to
2996 * the socket referenced by *map* (of type
2997 * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
2998 * egress interfaces can be used for redirection. The
2999 * **BPF_F_INGRESS** value in *flags* is used to make the
3000 * distinction (ingress path is selected if the flag is present,
3001 * egress path otherwise). This is the only flag supported for now.
3003 * **SK_PASS** on success, or **SK_DROP** on error.
3005 * long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
3007 * For socket policies, apply the verdict of the eBPF program to
3008 * the next *bytes* (number of bytes) of message *msg*.
3010 * For example, this helper can be used in the following cases:
3012 * * A single **sendmsg**\ () or **sendfile**\ () system call
3013 * contains multiple logical messages that the eBPF program is
3014 * supposed to read and for which it should apply a verdict.
3015 * * An eBPF program only cares to read the first *bytes* of a
3016 * *msg*. If the message has a large payload, then setting up
3017 * and calling the eBPF program repeatedly for all bytes, even
3018 * though the verdict is already known, would create unnecessary
3021 * When called from within an eBPF program, the helper sets a
3022 * counter internal to the BPF infrastructure, that is used to
3023 * apply the last verdict to the next *bytes*. If *bytes* is
3024 * smaller than the current data being processed from a
3025 * **sendmsg**\ () or **sendfile**\ () system call, the first
3026 * *bytes* will be sent and the eBPF program will be re-run with
3027 * the pointer for start of data pointing to byte number *bytes*
3028 * **+ 1**. If *bytes* is larger than the current data being
3029 * processed, then the eBPF verdict will be applied to multiple
3030 * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are
3033 * Note that if a socket closes with the internal counter holding
3034 * a non-zero value, this is not a problem because data is not
3035 * being buffered for *bytes* and is sent as it is received.
3039 * long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
3041 * For socket policies, prevent the execution of the verdict eBPF
3042 * program for message *msg* until *bytes* (byte number) have been
3045 * This can be used when one needs a specific number of bytes
3046 * before a verdict can be assigned, even if the data spans
3047 * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
3048 * case would be a user calling **sendmsg**\ () repeatedly with
3049 * 1-byte long message segments. Obviously, this is bad for
3050 * performance, but it is still valid. If the eBPF program needs
3051 * *bytes* bytes to validate a header, this helper can be used to
3052 * prevent the eBPF program to be called again until *bytes* have
3057 * long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
3059 * For socket policies, pull in non-linear data from user space
3060 * for *msg* and set pointers *msg*\ **->data** and *msg*\
3061 * **->data_end** to *start* and *end* bytes offsets into *msg*,
3064 * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
3065 * *msg* it can only parse data that the (**data**, **data_end**)
3066 * pointers have already consumed. For **sendmsg**\ () hooks this
3067 * is likely the first scatterlist element. But for calls relying
3068 * on the **sendpage** handler (e.g. **sendfile**\ ()) this will
3069 * be the range (**0**, **0**) because the data is shared with
3070 * user space and by default the objective is to avoid allowing
3071 * user space to modify data while (or after) eBPF verdict is
3072 * being decided. This helper can be used to pull in data and to
3073 * set the start and end pointer to given values. Data will be
3074 * copied if necessary (i.e. if data was not linear and if start
3075 * and end pointers do not point to the same chunk).
3077 * A call to this helper is susceptible to change the underlying
3078 * packet buffer. Therefore, at load time, all checks on pointers
3079 * previously done by the verifier are invalidated and must be
3080 * performed again, if the helper is used in combination with
3081 * direct packet access.
3083 * All values for *flags* are reserved for future usage, and must
3086 * 0 on success, or a negative error in case of failure.
3088 * long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len)
3090 * Bind the socket associated to *ctx* to the address pointed by
3091 * *addr*, of length *addr_len*. This allows for making outgoing
3092 * connection from the desired IP address, which can be useful for
3093 * example when all processes inside a cgroup should use one
3094 * single IP address on a host that has multiple IP configured.
3096 * This helper works for IPv4 and IPv6, TCP and UDP sockets. The
3097 * domain (*addr*\ **->sa_family**) must be **AF_INET** (or
3098 * **AF_INET6**). It's advised to pass zero port (**sin_port**
3099 * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like
3100 * behavior and lets the kernel efficiently pick up an unused
3101 * port as long as 4-tuple is unique. Passing non-zero port might
3102 * lead to degraded performance.
3104 * 0 on success, or a negative error in case of failure.
3106 * long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta)
3108 * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
3109 * possible to both shrink and grow the packet tail.
3110 * Shrink done via *delta* being a negative integer.
3112 * A call to this helper is susceptible to change the underlying
3113 * packet buffer. Therefore, at load time, all checks on pointers
3114 * previously done by the verifier are invalidated and must be
3115 * performed again, if the helper is used in combination with
3116 * direct packet access.
3118 * 0 on success, or a negative error in case of failure.
3120 * long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags)
3122 * Retrieve the XFRM state (IP transform framework, see also
3123 * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*.
3125 * The retrieved value is stored in the **struct bpf_xfrm_state**
3126 * pointed by *xfrm_state* and of length *size*.
3128 * All values for *flags* are reserved for future usage, and must
3131 * This helper is available only if the kernel was compiled with
3132 * **CONFIG_XFRM** configuration option.
3134 * 0 on success, or a negative error in case of failure.
3136 * long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags)
3138 * Return a user or a kernel stack in bpf program provided buffer.
3139 * To achieve this, the helper needs *ctx*, which is a pointer
3140 * to the context on which the tracing program is executed.
3141 * To store the stacktrace, the bpf program provides *buf* with
3142 * a nonnegative *size*.
3144 * The last argument, *flags*, holds the number of stack frames to
3145 * skip (from 0 to 255), masked with
3146 * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
3147 * the following flags:
3149 * **BPF_F_USER_STACK**
3150 * Collect a user space stack instead of a kernel stack.
3151 * **BPF_F_USER_BUILD_ID**
3152 * Collect (build_id, file_offset) instead of ips for user
3153 * stack, only valid if **BPF_F_USER_STACK** is also
3156 * *file_offset* is an offset relative to the beginning
3157 * of the executable or shared object file backing the vma
3158 * which the *ip* falls in. It is *not* an offset relative
3159 * to that object's base address. Accordingly, it must be
3160 * adjusted by adding (sh_addr - sh_offset), where
3161 * sh_{addr,offset} correspond to the executable section
3162 * containing *file_offset* in the object, for comparisons
3163 * to symbols' st_value to be valid.
3165 * **bpf_get_stack**\ () can collect up to
3166 * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
3167 * to sufficient large buffer size. Note that
3168 * this limit can be controlled with the **sysctl** program, and
3169 * that it should be manually increased in order to profile long
3170 * user stacks (such as stacks for Java programs). To do so, use:
3174 * # sysctl kernel.perf_event_max_stack=<new value>
3176 * The non-negative copied *buf* length equal to or less than
3177 * *size* on success, or a negative error in case of failure.
3179 * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
3181 * This helper is similar to **bpf_skb_load_bytes**\ () in that
3182 * it provides an easy way to load *len* bytes from *offset*
3183 * from the packet associated to *skb*, into the buffer pointed
3184 * by *to*. The difference to **bpf_skb_load_bytes**\ () is that
3185 * a fifth argument *start_header* exists in order to select a
3186 * base offset to start from. *start_header* can be one of:
3188 * **BPF_HDR_START_MAC**
3189 * Base offset to load data from is *skb*'s mac header.
3190 * **BPF_HDR_START_NET**
3191 * Base offset to load data from is *skb*'s network header.
3193 * In general, "direct packet access" is the preferred method to
3194 * access packet data, however, this helper is in particular useful
3195 * in socket filters where *skb*\ **->data** does not always point
3196 * to the start of the mac header and where "direct packet access"
3199 * 0 on success, or a negative error in case of failure.
3201 * long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags)
3203 * Do FIB lookup in kernel tables using parameters in *params*.
3204 * If lookup is successful and result shows packet is to be
3205 * forwarded, the neighbor tables are searched for the nexthop.
3206 * If successful (ie., FIB lookup shows forwarding and nexthop
3207 * is resolved), the nexthop address is returned in ipv4_dst
3208 * or ipv6_dst based on family, smac is set to mac address of
3209 * egress device, dmac is set to nexthop mac address, rt_metric
3210 * is set to metric from route (IPv4/IPv6 only), and ifindex
3211 * is set to the device index of the nexthop from the FIB lookup.
3213 * *plen* argument is the size of the passed in struct.
3214 * *flags* argument can be a combination of one or more of the
3217 * **BPF_FIB_LOOKUP_DIRECT**
3218 * Do a direct table lookup vs full lookup using FIB
3220 * **BPF_FIB_LOOKUP_TBID**
3221 * Used with BPF_FIB_LOOKUP_DIRECT.
3222 * Use the routing table ID present in *params*->tbid
3223 * for the fib lookup.
3224 * **BPF_FIB_LOOKUP_OUTPUT**
3225 * Perform lookup from an egress perspective (default is
3227 * **BPF_FIB_LOOKUP_SKIP_NEIGH**
3228 * Skip the neighbour table lookup. *params*->dmac
3229 * and *params*->smac will not be set as output. A common
3230 * use case is to call **bpf_redirect_neigh**\ () after
3231 * doing **bpf_fib_lookup**\ ().
3233 * *ctx* is either **struct xdp_md** for XDP programs or
3234 * **struct sk_buff** tc cls_act programs.
3236 * * < 0 if any input argument is invalid
3237 * * 0 on success (packet is forwarded, nexthop neighbor exists)
3238 * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
3239 * packet is not forwarded or needs assist from full stack
3241 * If lookup fails with BPF_FIB_LKUP_RET_FRAG_NEEDED, then the MTU
3242 * was exceeded and output params->mtu_result contains the MTU.
3244 * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
3246 * Add an entry to, or update a sockhash *map* referencing sockets.
3247 * The *skops* is used as a new value for the entry associated to
3248 * *key*. *flags* is one of:
3251 * The entry for *key* must not exist in the map.
3253 * The entry for *key* must already exist in the map.
3255 * No condition on the existence of the entry for *key*.
3257 * If the *map* has eBPF programs (parser and verdict), those will
3258 * be inherited by the socket being added. If the socket is
3259 * already attached to eBPF programs, this results in an error.
3261 * 0 on success, or a negative error in case of failure.
3263 * long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
3265 * This helper is used in programs implementing policies at the
3266 * socket level. If the message *msg* is allowed to pass (i.e. if
3267 * the verdict eBPF program returns **SK_PASS**), redirect it to
3268 * the socket referenced by *map* (of type
3269 * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
3270 * egress interfaces can be used for redirection. The
3271 * **BPF_F_INGRESS** value in *flags* is used to make the
3272 * distinction (ingress path is selected if the flag is present,
3273 * egress path otherwise). This is the only flag supported for now.
3275 * **SK_PASS** on success, or **SK_DROP** on error.
3277 * long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
3279 * This helper is used in programs implementing policies at the
3280 * skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
3281 * if the verdict eBPF program returns **SK_PASS**), redirect it
3282 * to the socket referenced by *map* (of type
3283 * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
3284 * egress interfaces can be used for redirection. The
3285 * **BPF_F_INGRESS** value in *flags* is used to make the
3286 * distinction (ingress path is selected if the flag is present,
3287 * egress otherwise). This is the only flag supported for now.
3289 * **SK_PASS** on success, or **SK_DROP** on error.
3291 * long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len)
3293 * Encapsulate the packet associated to *skb* within a Layer 3
3294 * protocol header. This header is provided in the buffer at
3295 * address *hdr*, with *len* its size in bytes. *type* indicates
3296 * the protocol of the header and can be one of:
3298 * **BPF_LWT_ENCAP_SEG6**
3299 * IPv6 encapsulation with Segment Routing Header
3300 * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
3301 * the IPv6 header is computed by the kernel.
3302 * **BPF_LWT_ENCAP_SEG6_INLINE**
3303 * Only works if *skb* contains an IPv6 packet. Insert a
3304 * Segment Routing Header (**struct ipv6_sr_hdr**) inside
3306 * **BPF_LWT_ENCAP_IP**
3307 * IP encapsulation (GRE/GUE/IPIP/etc). The outer header
3308 * must be IPv4 or IPv6, followed by zero or more
3309 * additional headers, up to **LWT_BPF_MAX_HEADROOM**
3310 * total bytes in all prepended headers. Please note that
3311 * if **skb_is_gso**\ (*skb*) is true, no more than two
3312 * headers can be prepended, and the inner header, if
3313 * present, should be either GRE or UDP/GUE.
3315 * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs
3316 * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can
3317 * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and
3318 * **BPF_PROG_TYPE_LWT_XMIT**.
3320 * A call to this helper is susceptible to change the underlying
3321 * packet buffer. Therefore, at load time, all checks on pointers
3322 * previously done by the verifier are invalidated and must be
3323 * performed again, if the helper is used in combination with
3324 * direct packet access.
3326 * 0 on success, or a negative error in case of failure.
3328 * long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len)
3330 * Store *len* bytes from address *from* into the packet
3331 * associated to *skb*, at *offset*. Only the flags, tag and TLVs
3332 * inside the outermost IPv6 Segment Routing Header can be
3333 * modified through this helper.
3335 * A call to this helper is susceptible to change the underlying
3336 * packet buffer. Therefore, at load time, all checks on pointers
3337 * previously done by the verifier are invalidated and must be
3338 * performed again, if the helper is used in combination with
3339 * direct packet access.
3341 * 0 on success, or a negative error in case of failure.
3343 * long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta)
3345 * Adjust the size allocated to TLVs in the outermost IPv6
3346 * Segment Routing Header contained in the packet associated to
3347 * *skb*, at position *offset* by *delta* bytes. Only offsets
3348 * after the segments are accepted. *delta* can be as well
3349 * positive (growing) as negative (shrinking).
3351 * A call to this helper is susceptible to change the underlying
3352 * packet buffer. Therefore, at load time, all checks on pointers
3353 * previously done by the verifier are invalidated and must be
3354 * performed again, if the helper is used in combination with
3355 * direct packet access.
3357 * 0 on success, or a negative error in case of failure.
3359 * long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len)
3361 * Apply an IPv6 Segment Routing action of type *action* to the
3362 * packet associated to *skb*. Each action takes a parameter
3363 * contained at address *param*, and of length *param_len* bytes.
3364 * *action* can be one of:
3366 * **SEG6_LOCAL_ACTION_END_X**
3367 * End.X action: Endpoint with Layer-3 cross-connect.
3368 * Type of *param*: **struct in6_addr**.
3369 * **SEG6_LOCAL_ACTION_END_T**
3370 * End.T action: Endpoint with specific IPv6 table lookup.
3371 * Type of *param*: **int**.
3372 * **SEG6_LOCAL_ACTION_END_B6**
3373 * End.B6 action: Endpoint bound to an SRv6 policy.
3374 * Type of *param*: **struct ipv6_sr_hdr**.
3375 * **SEG6_LOCAL_ACTION_END_B6_ENCAP**
3376 * End.B6.Encap action: Endpoint bound to an SRv6
3377 * encapsulation policy.
3378 * Type of *param*: **struct ipv6_sr_hdr**.
3380 * A call to this helper is susceptible to change the underlying
3381 * packet buffer. Therefore, at load time, all checks on pointers
3382 * previously done by the verifier are invalidated and must be
3383 * performed again, if the helper is used in combination with
3384 * direct packet access.
3386 * 0 on success, or a negative error in case of failure.
3388 * long bpf_rc_repeat(void *ctx)
3390 * This helper is used in programs implementing IR decoding, to
3391 * report a successfully decoded repeat key message. This delays
3392 * the generation of a key up event for previously generated
3395 * Some IR protocols like NEC have a special IR message for
3396 * repeating last button, for when a button is held down.
3398 * The *ctx* should point to the lirc sample as passed into
3401 * This helper is only available is the kernel was compiled with
3402 * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
3407 * long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle)
3409 * This helper is used in programs implementing IR decoding, to
3410 * report a successfully decoded key press with *scancode*,
3411 * *toggle* value in the given *protocol*. The scancode will be
3412 * translated to a keycode using the rc keymap, and reported as
3413 * an input key down event. After a period a key up event is
3414 * generated. This period can be extended by calling either
3415 * **bpf_rc_keydown**\ () again with the same values, or calling
3416 * **bpf_rc_repeat**\ ().
3418 * Some protocols include a toggle bit, in case the button was
3419 * released and pressed again between consecutive scancodes.
3421 * The *ctx* should point to the lirc sample as passed into
3424 * The *protocol* is the decoded protocol number (see
3425 * **enum rc_proto** for some predefined values).
3427 * This helper is only available is the kernel was compiled with
3428 * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
3433 * u64 bpf_skb_cgroup_id(struct sk_buff *skb)
3435 * Return the cgroup v2 id of the socket associated with the *skb*.
3436 * This is roughly similar to the **bpf_get_cgroup_classid**\ ()
3437 * helper for cgroup v1 by providing a tag resp. identifier that
3438 * can be matched on or used for map lookups e.g. to implement
3439 * policy. The cgroup v2 id of a given path in the hierarchy is
3440 * exposed in user space through the f_handle API in order to get
3441 * to the same 64-bit id.
3443 * This helper can be used on TC egress path, but not on ingress,
3444 * and is available only if the kernel was compiled with the
3445 * **CONFIG_SOCK_CGROUP_DATA** configuration option.
3447 * The id is returned or 0 in case the id could not be retrieved.
3449 * u64 bpf_get_current_cgroup_id(void)
3451 * Get the current cgroup id based on the cgroup within which
3452 * the current task is running.
3454 * A 64-bit integer containing the current cgroup id based
3455 * on the cgroup within which the current task is running.
3457 * void *bpf_get_local_storage(void *map, u64 flags)
3459 * Get the pointer to the local storage area.
3460 * The type and the size of the local storage is defined
3461 * by the *map* argument.
3462 * The *flags* meaning is specific for each map type,
3463 * and has to be 0 for cgroup local storage.
3465 * Depending on the BPF program type, a local storage area
3466 * can be shared between multiple instances of the BPF program,
3467 * running simultaneously.
3469 * A user should care about the synchronization by himself.
3470 * For example, by using the **BPF_ATOMIC** instructions to alter
3473 * A pointer to the local storage area.
3475 * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
3477 * Select a **SO_REUSEPORT** socket from a
3478 * **BPF_MAP_TYPE_REUSEPORT_SOCKARRAY** *map*.
3479 * It checks the selected socket is matching the incoming
3480 * request in the socket buffer.
3482 * 0 on success, or a negative error in case of failure.
3484 * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level)
3486 * Return id of cgroup v2 that is ancestor of cgroup associated
3487 * with the *skb* at the *ancestor_level*. The root cgroup is at
3488 * *ancestor_level* zero and each step down the hierarchy
3489 * increments the level. If *ancestor_level* == level of cgroup
3490 * associated with *skb*, then return value will be same as that
3491 * of **bpf_skb_cgroup_id**\ ().
3493 * The helper is useful to implement policies based on cgroups
3494 * that are upper in hierarchy than immediate cgroup associated
3497 * The format of returned id and helper limitations are same as in
3498 * **bpf_skb_cgroup_id**\ ().
3500 * The id is returned or 0 in case the id could not be retrieved.
3502 * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
3504 * Look for TCP socket matching *tuple*, optionally in a child
3505 * network namespace *netns*. The return value must be checked,
3506 * and if non-**NULL**, released via **bpf_sk_release**\ ().
3508 * The *ctx* should point to the context of the program, such as
3509 * the skb or socket (depending on the hook in use). This is used
3510 * to determine the base network namespace for the lookup.
3512 * *tuple_size* must be one of:
3514 * **sizeof**\ (*tuple*\ **->ipv4**)
3515 * Look for an IPv4 socket.
3516 * **sizeof**\ (*tuple*\ **->ipv6**)
3517 * Look for an IPv6 socket.
3519 * If the *netns* is a negative signed 32-bit integer, then the
3520 * socket lookup table in the netns associated with the *ctx*
3521 * will be used. For the TC hooks, this is the netns of the device
3522 * in the skb. For socket hooks, this is the netns of the socket.
3523 * If *netns* is any other signed 32-bit value greater than or
3524 * equal to zero then it specifies the ID of the netns relative to
3525 * the netns associated with the *ctx*. *netns* values beyond the
3526 * range of 32-bit integers are reserved for future use.
3528 * All values for *flags* are reserved for future usage, and must
3531 * This helper is available only if the kernel was compiled with
3532 * **CONFIG_NET** configuration option.
3534 * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
3535 * For sockets with reuseport option, the **struct bpf_sock**
3536 * result is from *reuse*\ **->socks**\ [] using the hash of the
3539 * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
3541 * Look for UDP socket matching *tuple*, optionally in a child
3542 * network namespace *netns*. The return value must be checked,
3543 * and if non-**NULL**, released via **bpf_sk_release**\ ().
3545 * The *ctx* should point to the context of the program, such as
3546 * the skb or socket (depending on the hook in use). This is used
3547 * to determine the base network namespace for the lookup.
3549 * *tuple_size* must be one of:
3551 * **sizeof**\ (*tuple*\ **->ipv4**)
3552 * Look for an IPv4 socket.
3553 * **sizeof**\ (*tuple*\ **->ipv6**)
3554 * Look for an IPv6 socket.
3556 * If the *netns* is a negative signed 32-bit integer, then the
3557 * socket lookup table in the netns associated with the *ctx*
3558 * will be used. For the TC hooks, this is the netns of the device
3559 * in the skb. For socket hooks, this is the netns of the socket.
3560 * If *netns* is any other signed 32-bit value greater than or
3561 * equal to zero then it specifies the ID of the netns relative to
3562 * the netns associated with the *ctx*. *netns* values beyond the
3563 * range of 32-bit integers are reserved for future use.
3565 * All values for *flags* are reserved for future usage, and must
3568 * This helper is available only if the kernel was compiled with
3569 * **CONFIG_NET** configuration option.
3571 * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
3572 * For sockets with reuseport option, the **struct bpf_sock**
3573 * result is from *reuse*\ **->socks**\ [] using the hash of the
3576 * long bpf_sk_release(void *sock)
3578 * Release the reference held by *sock*. *sock* must be a
3579 * non-**NULL** pointer that was returned from
3580 * **bpf_sk_lookup_xxx**\ ().
3582 * 0 on success, or a negative error in case of failure.
3584 * long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags)
3586 * Push an element *value* in *map*. *flags* is one of:
3589 * If the queue/stack is full, the oldest element is
3590 * removed to make room for this.
3592 * 0 on success, or a negative error in case of failure.
3594 * long bpf_map_pop_elem(struct bpf_map *map, void *value)
3596 * Pop an element from *map*.
3598 * 0 on success, or a negative error in case of failure.
3600 * long bpf_map_peek_elem(struct bpf_map *map, void *value)
3602 * Get an element from *map* without removing it.
3604 * 0 on success, or a negative error in case of failure.
3606 * long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
3608 * For socket policies, insert *len* bytes into *msg* at offset
3611 * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
3612 * *msg* it may want to insert metadata or options into the *msg*.
3613 * This can later be read and used by any of the lower layer BPF
3616 * This helper may fail if under memory pressure (a malloc
3617 * fails) in these cases BPF programs will get an appropriate
3618 * error and BPF programs will need to handle them.
3620 * 0 on success, or a negative error in case of failure.
3622 * long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
3624 * Will remove *len* bytes from a *msg* starting at byte *start*.
3625 * This may result in **ENOMEM** errors under certain situations if
3626 * an allocation and copy are required due to a full ring buffer.
3627 * However, the helper will try to avoid doing the allocation
3628 * if possible. Other errors can occur if input parameters are
3629 * invalid either due to *start* byte not being valid part of *msg*
3630 * payload and/or *pop* value being to large.
3632 * 0 on success, or a negative error in case of failure.
3634 * long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y)
3636 * This helper is used in programs implementing IR decoding, to
3637 * report a successfully decoded pointer movement.
3639 * The *ctx* should point to the lirc sample as passed into
3642 * This helper is only available is the kernel was compiled with
3643 * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
3648 * long bpf_spin_lock(struct bpf_spin_lock *lock)
3650 * Acquire a spinlock represented by the pointer *lock*, which is
3651 * stored as part of a value of a map. Taking the lock allows to
3652 * safely update the rest of the fields in that value. The
3653 * spinlock can (and must) later be released with a call to
3654 * **bpf_spin_unlock**\ (\ *lock*\ ).
3656 * Spinlocks in BPF programs come with a number of restrictions
3659 * * **bpf_spin_lock** objects are only allowed inside maps of
3660 * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this
3661 * list could be extended in the future).
3662 * * BTF description of the map is mandatory.
3663 * * The BPF program can take ONE lock at a time, since taking two
3664 * or more could cause dead locks.
3665 * * Only one **struct bpf_spin_lock** is allowed per map element.
3666 * * When the lock is taken, calls (either BPF to BPF or helpers)
3668 * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not
3669 * allowed inside a spinlock-ed region.
3670 * * The BPF program MUST call **bpf_spin_unlock**\ () to release
3671 * the lock, on all execution paths, before it returns.
3672 * * The BPF program can access **struct bpf_spin_lock** only via
3673 * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ ()
3674 * helpers. Loading or storing data into the **struct
3675 * bpf_spin_lock** *lock*\ **;** field of a map is not allowed.
3676 * * To use the **bpf_spin_lock**\ () helper, the BTF description
3677 * of the map value must be a struct and have **struct
3678 * bpf_spin_lock** *anyname*\ **;** field at the top level.
3679 * Nested lock inside another struct is not allowed.
3680 * * The **struct bpf_spin_lock** *lock* field in a map value must
3681 * be aligned on a multiple of 4 bytes in that value.
3682 * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy
3683 * the **bpf_spin_lock** field to user space.
3684 * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from
3685 * a BPF program, do not update the **bpf_spin_lock** field.
3686 * * **bpf_spin_lock** cannot be on the stack or inside a
3687 * networking packet (it can only be inside of a map values).
3688 * * **bpf_spin_lock** is available to root only.
3689 * * Tracing programs and socket filter programs cannot use
3690 * **bpf_spin_lock**\ () due to insufficient preemption checks
3691 * (but this may change in the future).
3692 * * **bpf_spin_lock** is not allowed in inner maps of map-in-map.
3696 * long bpf_spin_unlock(struct bpf_spin_lock *lock)
3698 * Release the *lock* previously locked by a call to
3699 * **bpf_spin_lock**\ (\ *lock*\ ).
3703 * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk)
3705 * This helper gets a **struct bpf_sock** pointer such
3706 * that all the fields in this **bpf_sock** can be accessed.
3708 * A **struct bpf_sock** pointer on success, or **NULL** in
3711 * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk)
3713 * This helper gets a **struct bpf_tcp_sock** pointer from a
3714 * **struct bpf_sock** pointer.
3716 * A **struct bpf_tcp_sock** pointer on success, or **NULL** in
3719 * long bpf_skb_ecn_set_ce(struct sk_buff *skb)
3721 * Set ECN (Explicit Congestion Notification) field of IP header
3722 * to **CE** (Congestion Encountered) if current value is **ECT**
3723 * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6
3726 * 1 if the **CE** flag is set (either by the current helper call
3727 * or because it was already present), 0 if it is not set.
3729 * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk)
3731 * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state.
3732 * **bpf_sk_release**\ () is unnecessary and not allowed.
3734 * A **struct bpf_sock** pointer on success, or **NULL** in
3737 * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags)
3739 * Look for TCP socket matching *tuple*, optionally in a child
3740 * network namespace *netns*. The return value must be checked,
3741 * and if non-**NULL**, released via **bpf_sk_release**\ ().
3743 * This function is identical to **bpf_sk_lookup_tcp**\ (), except
3744 * that it also returns timewait or request sockets. Use
3745 * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the
3748 * This helper is available only if the kernel was compiled with
3749 * **CONFIG_NET** configuration option.
3751 * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
3752 * For sockets with reuseport option, the **struct bpf_sock**
3753 * result is from *reuse*\ **->socks**\ [] using the hash of the
3756 * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
3758 * Check whether *iph* and *th* contain a valid SYN cookie ACK for
3759 * the listening socket in *sk*.
3761 * *iph* points to the start of the IPv4 or IPv6 header, while
3762 * *iph_len* contains **sizeof**\ (**struct iphdr**) or
3763 * **sizeof**\ (**struct ipv6hdr**).
3765 * *th* points to the start of the TCP header, while *th_len*
3766 * contains the length of the TCP header (at least
3767 * **sizeof**\ (**struct tcphdr**)).
3769 * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative
3772 * long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags)
3774 * Get name of sysctl in /proc/sys/ and copy it into provided by
3775 * program buffer *buf* of size *buf_len*.
3777 * The buffer is always NUL terminated, unless it's zero-sized.
3779 * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is
3780 * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name
3781 * only (e.g. "tcp_mem").
3783 * Number of character copied (not including the trailing NUL).
3785 * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
3786 * truncated name in this case).
3788 * long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len)
3790 * Get current value of sysctl as it is presented in /proc/sys
3791 * (incl. newline, etc), and copy it as a string into provided
3792 * by program buffer *buf* of size *buf_len*.
3794 * The whole value is copied, no matter what file position user
3795 * space issued e.g. sys_read at.
3797 * The buffer is always NUL terminated, unless it's zero-sized.
3799 * Number of character copied (not including the trailing NUL).
3801 * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
3802 * truncated name in this case).
3804 * **-EINVAL** if current value was unavailable, e.g. because
3805 * sysctl is uninitialized and read returns -EIO for it.
3807 * long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len)
3809 * Get new value being written by user space to sysctl (before
3810 * the actual write happens) and copy it as a string into
3811 * provided by program buffer *buf* of size *buf_len*.
3813 * User space may write new value at file position > 0.
3815 * The buffer is always NUL terminated, unless it's zero-sized.
3817 * Number of character copied (not including the trailing NUL).
3819 * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
3820 * truncated name in this case).
3822 * **-EINVAL** if sysctl is being read.
3824 * long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len)
3826 * Override new value being written by user space to sysctl with
3827 * value provided by program in buffer *buf* of size *buf_len*.
3829 * *buf* should contain a string in same form as provided by user
3830 * space on sysctl write.
3832 * User space may write new value at file position > 0. To override
3833 * the whole sysctl value file position should be set to zero.
3837 * **-E2BIG** if the *buf_len* is too big.
3839 * **-EINVAL** if sysctl is being read.
3841 * long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res)
3843 * Convert the initial part of the string from buffer *buf* of
3844 * size *buf_len* to a long integer according to the given base
3845 * and save the result in *res*.
3847 * The string may begin with an arbitrary amount of white space
3848 * (as determined by **isspace**\ (3)) followed by a single
3849 * optional '**-**' sign.
3851 * Five least significant bits of *flags* encode base, other bits
3852 * are currently unused.
3854 * Base must be either 8, 10, 16 or 0 to detect it automatically
3855 * similar to user space **strtol**\ (3).
3857 * Number of characters consumed on success. Must be positive but
3858 * no more than *buf_len*.
3860 * **-EINVAL** if no valid digits were found or unsupported base
3863 * **-ERANGE** if resulting value was out of range.
3865 * long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res)
3867 * Convert the initial part of the string from buffer *buf* of
3868 * size *buf_len* to an unsigned long integer according to the
3869 * given base and save the result in *res*.
3871 * The string may begin with an arbitrary amount of white space
3872 * (as determined by **isspace**\ (3)).
3874 * Five least significant bits of *flags* encode base, other bits
3875 * are currently unused.
3877 * Base must be either 8, 10, 16 or 0 to detect it automatically
3878 * similar to user space **strtoul**\ (3).
3880 * Number of characters consumed on success. Must be positive but
3881 * no more than *buf_len*.
3883 * **-EINVAL** if no valid digits were found or unsupported base
3886 * **-ERANGE** if resulting value was out of range.
3888 * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags)
3890 * Get a bpf-local-storage from a *sk*.
3892 * Logically, it could be thought of getting the value from
3893 * a *map* with *sk* as the **key**. From this
3894 * perspective, the usage is not much different from
3895 * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this
3896 * helper enforces the key must be a full socket and the map must
3897 * be a **BPF_MAP_TYPE_SK_STORAGE** also.
3899 * Underneath, the value is stored locally at *sk* instead of
3900 * the *map*. The *map* is used as the bpf-local-storage
3901 * "type". The bpf-local-storage "type" (i.e. the *map*) is
3902 * searched against all bpf-local-storages residing at *sk*.
3904 * *sk* is a kernel **struct sock** pointer for LSM program.
3905 * *sk* is a **struct bpf_sock** pointer for other program types.
3907 * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be
3908 * used such that a new bpf-local-storage will be
3909 * created if one does not exist. *value* can be used
3910 * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify
3911 * the initial value of a bpf-local-storage. If *value* is
3912 * **NULL**, the new bpf-local-storage will be zero initialized.
3914 * A bpf-local-storage pointer is returned on success.
3916 * **NULL** if not found or there was an error in adding
3917 * a new bpf-local-storage.
3919 * long bpf_sk_storage_delete(struct bpf_map *map, void *sk)
3921 * Delete a bpf-local-storage from a *sk*.
3925 * **-ENOENT** if the bpf-local-storage cannot be found.
3926 * **-EINVAL** if sk is not a fullsock (e.g. a request_sock).
3928 * long bpf_send_signal(u32 sig)
3930 * Send signal *sig* to the process of the current task.
3931 * The signal may be delivered to any of this process's threads.
3933 * 0 on success or successfully queued.
3935 * **-EBUSY** if work queue under nmi is full.
3937 * **-EINVAL** if *sig* is invalid.
3939 * **-EPERM** if no permission to send the *sig*.
3941 * **-EAGAIN** if bpf program can try again.
3943 * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
3945 * Try to issue a SYN cookie for the packet with corresponding
3946 * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
3948 * *iph* points to the start of the IPv4 or IPv6 header, while
3949 * *iph_len* contains **sizeof**\ (**struct iphdr**) or
3950 * **sizeof**\ (**struct ipv6hdr**).
3952 * *th* points to the start of the TCP header, while *th_len*
3953 * contains the length of the TCP header with options (at least
3954 * **sizeof**\ (**struct tcphdr**)).
3956 * On success, lower 32 bits hold the generated SYN cookie in
3957 * followed by 16 bits which hold the MSS value for that cookie,
3958 * and the top 16 bits are unused.
3960 * On failure, the returned value is one of the following:
3962 * **-EINVAL** SYN cookie cannot be issued due to error
3964 * **-ENOENT** SYN cookie should not be issued (no SYN flood)
3966 * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
3968 * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
3970 * long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
3972 * Write raw *data* blob into a special BPF perf event held by
3973 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
3974 * event must have the following attributes: **PERF_SAMPLE_RAW**
3975 * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
3976 * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
3978 * The *flags* are used to indicate the index in *map* for which
3979 * the value must be put, masked with **BPF_F_INDEX_MASK**.
3980 * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
3981 * to indicate that the index of the current CPU core should be
3984 * The value to write, of *size*, is passed through eBPF stack and
3985 * pointed by *data*.
3987 * *ctx* is a pointer to in-kernel struct sk_buff.
3989 * This helper is similar to **bpf_perf_event_output**\ () but
3990 * restricted to raw_tracepoint bpf programs.
3992 * 0 on success, or a negative error in case of failure.
3994 * long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr)
3996 * Safely attempt to read *size* bytes from user space address
3997 * *unsafe_ptr* and store the data in *dst*.
3999 * 0 on success, or a negative error in case of failure.
4001 * long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
4003 * Safely attempt to read *size* bytes from kernel space address
4004 * *unsafe_ptr* and store the data in *dst*.
4006 * 0 on success, or a negative error in case of failure.
4008 * long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr)
4010 * Copy a NUL terminated string from an unsafe user address
4011 * *unsafe_ptr* to *dst*. The *size* should include the
4012 * terminating NUL byte. In case the string length is smaller than
4013 * *size*, the target is not padded with further NUL bytes. If the
4014 * string length is larger than *size*, just *size*-1 bytes are
4015 * copied and the last byte is set to NUL.
4017 * On success, returns the number of bytes that were written,
4018 * including the terminal NUL. This makes this helper useful in
4019 * tracing programs for reading strings, and more importantly to
4020 * get its length at runtime. See the following snippet:
4024 * SEC("kprobe/sys_open")
4025 * void bpf_sys_open(struct pt_regs *ctx)
4027 * char buf[PATHLEN]; // PATHLEN is defined to 256
4028 * int res = bpf_probe_read_user_str(buf, sizeof(buf),
4031 * // Consume buf, for example push it to
4032 * // userspace via bpf_perf_event_output(); we
4033 * // can use res (the string length) as event
4034 * // size, after checking its boundaries.
4037 * In comparison, using **bpf_probe_read_user**\ () helper here
4038 * instead to read the string would require to estimate the length
4039 * at compile time, and would often result in copying more memory
4042 * Another useful use case is when parsing individual process
4043 * arguments or individual environment variables navigating
4044 * *current*\ **->mm->arg_start** and *current*\
4045 * **->mm->env_start**: using this helper and the return value,
4046 * one can quickly iterate at the right offset of the memory area.
4048 * On success, the strictly positive length of the output string,
4049 * including the trailing NUL character. On error, a negative
4052 * long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr)
4054 * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr*
4055 * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply.
4057 * On success, the strictly positive length of the string, including
4058 * the trailing NUL character. On error, a negative value.
4060 * long bpf_tcp_send_ack(void *tp, u32 rcv_nxt)
4062 * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**.
4063 * *rcv_nxt* is the ack_seq to be sent out.
4065 * 0 on success, or a negative error in case of failure.
4067 * long bpf_send_signal_thread(u32 sig)
4069 * Send signal *sig* to the thread corresponding to the current task.
4071 * 0 on success or successfully queued.
4073 * **-EBUSY** if work queue under nmi is full.
4075 * **-EINVAL** if *sig* is invalid.
4077 * **-EPERM** if no permission to send the *sig*.
4079 * **-EAGAIN** if bpf program can try again.
4081 * u64 bpf_jiffies64(void)
4083 * Obtain the 64bit jiffies
4085 * The 64 bit jiffies
4087 * long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags)
4089 * For an eBPF program attached to a perf event, retrieve the
4090 * branch records (**struct perf_branch_entry**) associated to *ctx*
4091 * and store it in the buffer pointed by *buf* up to size
4094 * On success, number of bytes written to *buf*. On error, a
4097 * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to
4098 * instead return the number of bytes required to store all the
4099 * branch entries. If this flag is set, *buf* may be NULL.
4101 * **-EINVAL** if arguments invalid or **size** not a multiple
4102 * of **sizeof**\ (**struct perf_branch_entry**\ ).
4104 * **-ENOENT** if architecture does not support branch records.
4106 * long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size)
4108 * Returns 0 on success, values for *pid* and *tgid* as seen from the current
4109 * *namespace* will be returned in *nsdata*.
4111 * 0 on success, or one of the following in case of failure:
4113 * **-EINVAL** if dev and inum supplied don't match dev_t and inode number
4114 * with nsfs of current task, or if dev conversion to dev_t lost high bits.
4116 * **-ENOENT** if pidns does not exists for the current task.
4118 * long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
4120 * Write raw *data* blob into a special BPF perf event held by
4121 * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
4122 * event must have the following attributes: **PERF_SAMPLE_RAW**
4123 * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
4124 * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
4126 * The *flags* are used to indicate the index in *map* for which
4127 * the value must be put, masked with **BPF_F_INDEX_MASK**.
4128 * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
4129 * to indicate that the index of the current CPU core should be
4132 * The value to write, of *size*, is passed through eBPF stack and
4133 * pointed by *data*.
4135 * *ctx* is a pointer to in-kernel struct xdp_buff.
4137 * This helper is similar to **bpf_perf_eventoutput**\ () but
4138 * restricted to raw_tracepoint bpf programs.
4140 * 0 on success, or a negative error in case of failure.
4142 * u64 bpf_get_netns_cookie(void *ctx)
4144 * Retrieve the cookie (generated by the kernel) of the network
4145 * namespace the input *ctx* is associated with. The network
4146 * namespace cookie remains stable for its lifetime and provides
4147 * a global identifier that can be assumed unique. If *ctx* is
4148 * NULL, then the helper returns the cookie for the initial
4149 * network namespace. The cookie itself is very similar to that
4150 * of **bpf_get_socket_cookie**\ () helper, but for network
4151 * namespaces instead of sockets.
4153 * A 8-byte long opaque number.
4155 * u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level)
4157 * Return id of cgroup v2 that is ancestor of the cgroup associated
4158 * with the current task at the *ancestor_level*. The root cgroup
4159 * is at *ancestor_level* zero and each step down the hierarchy
4160 * increments the level. If *ancestor_level* == level of cgroup
4161 * associated with the current task, then return value will be the
4162 * same as that of **bpf_get_current_cgroup_id**\ ().
4164 * The helper is useful to implement policies based on cgroups
4165 * that are upper in hierarchy than immediate cgroup associated
4166 * with the current task.
4168 * The format of returned id and helper limitations are same as in
4169 * **bpf_get_current_cgroup_id**\ ().
4171 * The id is returned or 0 in case the id could not be retrieved.
4173 * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags)
4175 * Helper is overloaded depending on BPF program type. This
4176 * description applies to **BPF_PROG_TYPE_SCHED_CLS** and
4177 * **BPF_PROG_TYPE_SCHED_ACT** programs.
4179 * Assign the *sk* to the *skb*. When combined with appropriate
4180 * routing configuration to receive the packet towards the socket,
4181 * will cause *skb* to be delivered to the specified socket.
4182 * Subsequent redirection of *skb* via **bpf_redirect**\ (),
4183 * **bpf_clone_redirect**\ () or other methods outside of BPF may
4184 * interfere with successful delivery to the socket.
4186 * This operation is only valid from TC ingress path.
4188 * The *flags* argument must be zero.
4190 * 0 on success, or a negative error in case of failure:
4192 * **-EINVAL** if specified *flags* are not supported.
4194 * **-ENOENT** if the socket is unavailable for assignment.
4196 * **-ENETUNREACH** if the socket is unreachable (wrong netns).
4198 * **-EOPNOTSUPP** if the operation is not supported, for example
4199 * a call from outside of TC ingress.
4201 * **-ESOCKTNOSUPPORT** if the socket type is not supported
4204 * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags)
4206 * Helper is overloaded depending on BPF program type. This
4207 * description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs.
4209 * Select the *sk* as a result of a socket lookup.
4211 * For the operation to succeed passed socket must be compatible
4212 * with the packet description provided by the *ctx* object.
4214 * L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must
4215 * be an exact match. While IP family (**AF_INET** or
4216 * **AF_INET6**) must be compatible, that is IPv6 sockets
4217 * that are not v6-only can be selected for IPv4 packets.
4219 * Only TCP listeners and UDP unconnected sockets can be
4220 * selected. *sk* can also be NULL to reset any previous
4223 * *flags* argument can combination of following values:
4225 * * **BPF_SK_LOOKUP_F_REPLACE** to override the previous
4226 * socket selection, potentially done by a BPF program
4227 * that ran before us.
4229 * * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip
4230 * load-balancing within reuseport group for the socket
4233 * On success *ctx->sk* will point to the selected socket.
4236 * 0 on success, or a negative errno in case of failure.
4238 * * **-EAFNOSUPPORT** if socket family (*sk->family*) is
4239 * not compatible with packet family (*ctx->family*).
4241 * * **-EEXIST** if socket has been already selected,
4242 * potentially by another program, and
4243 * **BPF_SK_LOOKUP_F_REPLACE** flag was not specified.
4245 * * **-EINVAL** if unsupported flags were specified.
4247 * * **-EPROTOTYPE** if socket L4 protocol
4248 * (*sk->protocol*) doesn't match packet protocol
4249 * (*ctx->protocol*).
4251 * * **-ESOCKTNOSUPPORT** if socket is not in allowed
4252 * state (TCP listening or UDP unconnected).
4254 * u64 bpf_ktime_get_boot_ns(void)
4256 * Return the time elapsed since system boot, in nanoseconds.
4257 * Does include the time the system was suspended.
4258 * See: **clock_gettime**\ (**CLOCK_BOOTTIME**)
4262 * long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len)
4264 * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print
4265 * out the format string.
4266 * The *m* represents the seq_file. The *fmt* and *fmt_size* are for
4267 * the format string itself. The *data* and *data_len* are format string
4268 * arguments. The *data* are a **u64** array and corresponding format string
4269 * values are stored in the array. For strings and pointers where pointees
4270 * are accessed, only the pointer values are stored in the *data* array.
4271 * The *data_len* is the size of *data* in bytes - must be a multiple of 8.
4273 * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory.
4274 * Reading kernel memory may fail due to either invalid address or
4275 * valid address but requiring a major memory fault. If reading kernel memory
4276 * fails, the string for **%s** will be an empty string, and the ip
4277 * address for **%p{i,I}{4,6}** will be 0. Not returning error to
4278 * bpf program is consistent with what **bpf_trace_printk**\ () does for now.
4280 * 0 on success, or a negative error in case of failure:
4282 * **-EBUSY** if per-CPU memory copy buffer is busy, can try again
4283 * by returning 1 from bpf program.
4285 * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported.
4287 * **-E2BIG** if *fmt* contains too many format specifiers.
4289 * **-EOVERFLOW** if an overflow happened: The same object will be tried again.
4291 * long bpf_seq_write(struct seq_file *m, const void *data, u32 len)
4293 * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data.
4294 * The *m* represents the seq_file. The *data* and *len* represent the
4295 * data to write in bytes.
4297 * 0 on success, or a negative error in case of failure:
4299 * **-EOVERFLOW** if an overflow happened: The same object will be tried again.
4301 * u64 bpf_sk_cgroup_id(void *sk)
4303 * Return the cgroup v2 id of the socket *sk*.
4305 * *sk* must be a non-**NULL** pointer to a socket, e.g. one
4306 * returned from **bpf_sk_lookup_xxx**\ (),
4307 * **bpf_sk_fullsock**\ (), etc. The format of returned id is
4308 * same as in **bpf_skb_cgroup_id**\ ().
4310 * This helper is available only if the kernel was compiled with
4311 * the **CONFIG_SOCK_CGROUP_DATA** configuration option.
4313 * The id is returned or 0 in case the id could not be retrieved.
4315 * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level)
4317 * Return id of cgroup v2 that is ancestor of cgroup associated
4318 * with the *sk* at the *ancestor_level*. The root cgroup is at
4319 * *ancestor_level* zero and each step down the hierarchy
4320 * increments the level. If *ancestor_level* == level of cgroup
4321 * associated with *sk*, then return value will be same as that
4322 * of **bpf_sk_cgroup_id**\ ().
4324 * The helper is useful to implement policies based on cgroups
4325 * that are upper in hierarchy than immediate cgroup associated
4328 * The format of returned id and helper limitations are same as in
4329 * **bpf_sk_cgroup_id**\ ().
4331 * The id is returned or 0 in case the id could not be retrieved.
4333 * long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags)
4335 * Copy *size* bytes from *data* into a ring buffer *ringbuf*.
4336 * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
4337 * of new data availability is sent.
4338 * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
4339 * of new data availability is sent unconditionally.
4340 * If **0** is specified in *flags*, an adaptive notification
4341 * of new data availability is sent.
4343 * An adaptive notification is a notification sent whenever the user-space
4344 * process has caught up and consumed all available payloads. In case the user-space
4345 * process is still processing a previous payload, then no notification is needed
4346 * as it will process the newly added payload automatically.
4348 * 0 on success, or a negative error in case of failure.
4350 * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags)
4352 * Reserve *size* bytes of payload in a ring buffer *ringbuf*.
4353 * *flags* must be 0.
4355 * Valid pointer with *size* bytes of memory available; NULL,
4358 * void bpf_ringbuf_submit(void *data, u64 flags)
4360 * Submit reserved ring buffer sample, pointed to by *data*.
4361 * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
4362 * of new data availability is sent.
4363 * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
4364 * of new data availability is sent unconditionally.
4365 * If **0** is specified in *flags*, an adaptive notification
4366 * of new data availability is sent.
4368 * See 'bpf_ringbuf_output()' for the definition of adaptive notification.
4370 * Nothing. Always succeeds.
4372 * void bpf_ringbuf_discard(void *data, u64 flags)
4374 * Discard reserved ring buffer sample, pointed to by *data*.
4375 * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification
4376 * of new data availability is sent.
4377 * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification
4378 * of new data availability is sent unconditionally.
4379 * If **0** is specified in *flags*, an adaptive notification
4380 * of new data availability is sent.
4382 * See 'bpf_ringbuf_output()' for the definition of adaptive notification.
4384 * Nothing. Always succeeds.
4386 * u64 bpf_ringbuf_query(void *ringbuf, u64 flags)
4388 * Query various characteristics of provided ring buffer. What
4389 * exactly is queries is determined by *flags*:
4391 * * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed.
4392 * * **BPF_RB_RING_SIZE**: The size of ring buffer.
4393 * * **BPF_RB_CONS_POS**: Consumer position (can wrap around).
4394 * * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around).
4396 * Data returned is just a momentary snapshot of actual values
4397 * and could be inaccurate, so this facility should be used to
4398 * power heuristics and for reporting, not to make 100% correct
4401 * Requested value, or 0, if *flags* are not recognized.
4403 * long bpf_csum_level(struct sk_buff *skb, u64 level)
4405 * Change the skbs checksum level by one layer up or down, or
4406 * reset it entirely to none in order to have the stack perform
4407 * checksum validation. The level is applicable to the following
4408 * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of
4409 * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP |
4410 * through **bpf_skb_adjust_room**\ () helper with passing in
4411 * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call
4412 * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since
4413 * the UDP header is removed. Similarly, an encap of the latter
4414 * into the former could be accompanied by a helper call to
4415 * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the
4416 * skb is still intended to be processed in higher layers of the
4417 * stack instead of just egressing at tc.
4419 * There are three supported level settings at this time:
4421 * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs
4422 * with CHECKSUM_UNNECESSARY.
4423 * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs
4424 * with CHECKSUM_UNNECESSARY.
4425 * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and
4426 * sets CHECKSUM_NONE to force checksum validation by the stack.
4427 * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current
4430 * 0 on success, or a negative error in case of failure. In the
4431 * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level
4432 * is returned or the error code -EACCES in case the skb is not
4433 * subject to CHECKSUM_UNNECESSARY.
4435 * struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk)
4437 * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer.
4439 * *sk* if casting is valid, or **NULL** otherwise.
4441 * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk)
4443 * Dynamically cast a *sk* pointer to a *tcp_sock* pointer.
4445 * *sk* if casting is valid, or **NULL** otherwise.
4447 * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk)
4449 * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer.
4451 * *sk* if casting is valid, or **NULL** otherwise.
4453 * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk)
4455 * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer.
4457 * *sk* if casting is valid, or **NULL** otherwise.
4459 * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk)
4461 * Dynamically cast a *sk* pointer to a *udp6_sock* pointer.
4463 * *sk* if casting is valid, or **NULL** otherwise.
4465 * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
4467 * Return a user or a kernel stack in bpf program provided buffer.
4468 * To achieve this, the helper needs *task*, which is a valid
4469 * pointer to **struct task_struct**. To store the stacktrace, the
4470 * bpf program provides *buf* with a nonnegative *size*.
4472 * The last argument, *flags*, holds the number of stack frames to
4473 * skip (from 0 to 255), masked with
4474 * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
4475 * the following flags:
4477 * **BPF_F_USER_STACK**
4478 * Collect a user space stack instead of a kernel stack.
4479 * **BPF_F_USER_BUILD_ID**
4480 * Collect buildid+offset instead of ips for user stack,
4481 * only valid if **BPF_F_USER_STACK** is also specified.
4483 * **bpf_get_task_stack**\ () can collect up to
4484 * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
4485 * to sufficient large buffer size. Note that
4486 * this limit can be controlled with the **sysctl** program, and
4487 * that it should be manually increased in order to profile long
4488 * user stacks (such as stacks for Java programs). To do so, use:
4492 * # sysctl kernel.perf_event_max_stack=<new value>
4494 * The non-negative copied *buf* length equal to or less than
4495 * *size* on success, or a negative error in case of failure.
4497 * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags)
4499 * Load header option. Support reading a particular TCP header
4500 * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**).
4502 * If *flags* is 0, it will search the option from the
4503 * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops**
4504 * has details on what skb_data contains under different
4505 * *skops*\ **->op**.
4507 * The first byte of the *searchby_res* specifies the
4508 * kind that it wants to search.
4510 * If the searching kind is an experimental kind
4511 * (i.e. 253 or 254 according to RFC6994). It also
4512 * needs to specify the "magic" which is either
4513 * 2 bytes or 4 bytes. It then also needs to
4514 * specify the size of the magic by using
4515 * the 2nd byte which is "kind-length" of a TCP
4516 * header option and the "kind-length" also
4517 * includes the first 2 bytes "kind" and "kind-length"
4518 * itself as a normal TCP header option also does.
4520 * For example, to search experimental kind 254 with
4521 * 2 byte magic 0xeB9F, the searchby_res should be
4522 * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ].
4524 * To search for the standard window scale option (3),
4525 * the *searchby_res* should be [ 3, 0, 0, .... 0 ].
4526 * Note, kind-length must be 0 for regular option.
4528 * Searching for No-Op (0) and End-of-Option-List (1) are
4531 * *len* must be at least 2 bytes which is the minimal size
4532 * of a header option.
4536 * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the
4537 * saved_syn packet or the just-received syn packet.
4540 * > 0 when found, the header option is copied to *searchby_res*.
4541 * The return value is the total length copied. On failure, a
4542 * negative error code is returned:
4544 * **-EINVAL** if a parameter is invalid.
4546 * **-ENOMSG** if the option is not found.
4548 * **-ENOENT** if no syn packet is available when
4549 * **BPF_LOAD_HDR_OPT_TCP_SYN** is used.
4551 * **-ENOSPC** if there is not enough space. Only *len* number of
4554 * **-EFAULT** on failure to parse the header options in the
4557 * **-EPERM** if the helper cannot be used under the current
4558 * *skops*\ **->op**.
4560 * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags)
4562 * Store header option. The data will be copied
4563 * from buffer *from* with length *len* to the TCP header.
4565 * The buffer *from* should have the whole option that
4566 * includes the kind, kind-length, and the actual
4567 * option data. The *len* must be at least kind-length
4568 * long. The kind-length does not have to be 4 byte
4569 * aligned. The kernel will take care of the padding
4570 * and setting the 4 bytes aligned value to th->doff.
4572 * This helper will check for duplicated option
4573 * by searching the same option in the outgoing skb.
4575 * This helper can only be called during
4576 * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**.
4579 * 0 on success, or negative error in case of failure:
4581 * **-EINVAL** If param is invalid.
4583 * **-ENOSPC** if there is not enough space in the header.
4584 * Nothing has been written
4586 * **-EEXIST** if the option already exists.
4588 * **-EFAULT** on failure to parse the existing header options.
4590 * **-EPERM** if the helper cannot be used under the current
4591 * *skops*\ **->op**.
4593 * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags)
4595 * Reserve *len* bytes for the bpf header option. The
4596 * space will be used by **bpf_store_hdr_opt**\ () later in
4597 * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**.
4599 * If **bpf_reserve_hdr_opt**\ () is called multiple times,
4600 * the total number of bytes will be reserved.
4602 * This helper can only be called during
4603 * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**.
4606 * 0 on success, or negative error in case of failure:
4608 * **-EINVAL** if a parameter is invalid.
4610 * **-ENOSPC** if there is not enough space in the header.
4612 * **-EPERM** if the helper cannot be used under the current
4613 * *skops*\ **->op**.
4615 * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags)
4617 * Get a bpf_local_storage from an *inode*.
4619 * Logically, it could be thought of as getting the value from
4620 * a *map* with *inode* as the **key**. From this
4621 * perspective, the usage is not much different from
4622 * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this
4623 * helper enforces the key must be an inode and the map must also
4624 * be a **BPF_MAP_TYPE_INODE_STORAGE**.
4626 * Underneath, the value is stored locally at *inode* instead of
4627 * the *map*. The *map* is used as the bpf-local-storage
4628 * "type". The bpf-local-storage "type" (i.e. the *map*) is
4629 * searched against all bpf_local_storage residing at *inode*.
4631 * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be
4632 * used such that a new bpf_local_storage will be
4633 * created if one does not exist. *value* can be used
4634 * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify
4635 * the initial value of a bpf_local_storage. If *value* is
4636 * **NULL**, the new bpf_local_storage will be zero initialized.
4638 * A bpf_local_storage pointer is returned on success.
4640 * **NULL** if not found or there was an error in adding
4641 * a new bpf_local_storage.
4643 * int bpf_inode_storage_delete(struct bpf_map *map, void *inode)
4645 * Delete a bpf_local_storage from an *inode*.
4649 * **-ENOENT** if the bpf_local_storage cannot be found.
4651 * long bpf_d_path(struct path *path, char *buf, u32 sz)
4653 * Return full path for given **struct path** object, which
4654 * needs to be the kernel BTF *path* object. The path is
4655 * returned in the provided buffer *buf* of size *sz* and
4656 * is zero terminated.
4659 * On success, the strictly positive length of the string,
4660 * including the trailing NUL character. On error, a negative
4663 * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr)
4665 * Read *size* bytes from user space address *user_ptr* and store
4666 * the data in *dst*. This is a wrapper of **copy_from_user**\ ().
4668 * 0 on success, or a negative error in case of failure.
4670 * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags)
4672 * Use BTF to store a string representation of *ptr*->ptr in *str*,
4673 * using *ptr*->type_id. This value should specify the type
4674 * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1)
4675 * can be used to look up vmlinux BTF type ids. Traversing the
4676 * data structure using BTF, the type information and values are
4677 * stored in the first *str_size* - 1 bytes of *str*. Safe copy of
4678 * the pointer data is carried out to avoid kernel crashes during
4679 * operation. Smaller types can use string space on the stack;
4680 * larger programs can use map data to store the string
4683 * The string can be subsequently shared with userspace via
4684 * bpf_perf_event_output() or ring buffer interfaces.
4685 * bpf_trace_printk() is to be avoided as it places too small
4686 * a limit on string size to be useful.
4688 * *flags* is a combination of
4691 * no formatting around type information
4693 * no struct/union member names/types
4695 * show raw (unobfuscated) pointer values;
4696 * equivalent to printk specifier %px.
4698 * show zero-valued struct/union members; they
4699 * are not displayed by default
4702 * The number of bytes that were written (or would have been
4703 * written if output had to be truncated due to string size),
4704 * or a negative error in cases of failure.
4706 * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags)
4708 * Use BTF to write to seq_write a string representation of
4709 * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf().
4710 * *flags* are identical to those used for bpf_snprintf_btf.
4712 * 0 on success or a negative error in case of failure.
4714 * u64 bpf_skb_cgroup_classid(struct sk_buff *skb)
4716 * See **bpf_get_cgroup_classid**\ () for the main description.
4717 * This helper differs from **bpf_get_cgroup_classid**\ () in that
4718 * the cgroup v1 net_cls class is retrieved only from the *skb*'s
4719 * associated socket instead of the current process.
4721 * The id is returned or 0 in case the id could not be retrieved.
4723 * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags)
4725 * Redirect the packet to another net device of index *ifindex*
4726 * and fill in L2 addresses from neighboring subsystem. This helper
4727 * is somewhat similar to **bpf_redirect**\ (), except that it
4728 * populates L2 addresses as well, meaning, internally, the helper
4729 * relies on the neighbor lookup for the L2 address of the nexthop.
4731 * The helper will perform a FIB lookup based on the skb's
4732 * networking header to get the address of the next hop, unless
4733 * this is supplied by the caller in the *params* argument. The
4734 * *plen* argument indicates the len of *params* and should be set
4735 * to 0 if *params* is NULL.
4737 * The *flags* argument is reserved and must be 0. The helper is
4738 * currently only supported for tc BPF program types, and enabled
4739 * for IPv4 and IPv6 protocols.
4741 * The helper returns **TC_ACT_REDIRECT** on success or
4742 * **TC_ACT_SHOT** on error.
4744 * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu)
4746 * Take a pointer to a percpu ksym, *percpu_ptr*, and return a
4747 * pointer to the percpu kernel variable on *cpu*. A ksym is an
4748 * extern variable decorated with '__ksym'. For ksym, there is a
4749 * global var (either static or global) defined of the same name
4750 * in the kernel. The ksym is percpu if the global var is percpu.
4751 * The returned pointer points to the global percpu var on *cpu*.
4753 * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the
4754 * kernel, except that bpf_per_cpu_ptr() may return NULL. This
4755 * happens if *cpu* is larger than nr_cpu_ids. The caller of
4756 * bpf_per_cpu_ptr() must check the returned value.
4758 * A pointer pointing to the kernel percpu variable on *cpu*, or
4759 * NULL, if *cpu* is invalid.
4761 * void *bpf_this_cpu_ptr(const void *percpu_ptr)
4763 * Take a pointer to a percpu ksym, *percpu_ptr*, and return a
4764 * pointer to the percpu kernel variable on this cpu. See the
4765 * description of 'ksym' in **bpf_per_cpu_ptr**\ ().
4767 * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in
4768 * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would
4769 * never return NULL.
4771 * A pointer pointing to the kernel percpu variable on this cpu.
4773 * long bpf_redirect_peer(u32 ifindex, u64 flags)
4775 * Redirect the packet to another net device of index *ifindex*.
4776 * This helper is somewhat similar to **bpf_redirect**\ (), except
4777 * that the redirection happens to the *ifindex*' peer device and
4778 * the netns switch takes place from ingress to ingress without
4779 * going through the CPU's backlog queue.
4781 * The *flags* argument is reserved and must be 0. The helper is
4782 * currently only supported for tc BPF program types at the ingress
4783 * hook and for veth device types. The peer device must reside in a
4784 * different network namespace.
4786 * The helper returns **TC_ACT_REDIRECT** on success or
4787 * **TC_ACT_SHOT** on error.
4789 * void *bpf_task_storage_get(struct bpf_map *map, struct task_struct *task, void *value, u64 flags)
4791 * Get a bpf_local_storage from the *task*.
4793 * Logically, it could be thought of as getting the value from
4794 * a *map* with *task* as the **key**. From this
4795 * perspective, the usage is not much different from
4796 * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this
4797 * helper enforces the key must be a task_struct and the map must also
4798 * be a **BPF_MAP_TYPE_TASK_STORAGE**.
4800 * Underneath, the value is stored locally at *task* instead of
4801 * the *map*. The *map* is used as the bpf-local-storage
4802 * "type". The bpf-local-storage "type" (i.e. the *map*) is
4803 * searched against all bpf_local_storage residing at *task*.
4805 * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be
4806 * used such that a new bpf_local_storage will be
4807 * created if one does not exist. *value* can be used
4808 * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify
4809 * the initial value of a bpf_local_storage. If *value* is
4810 * **NULL**, the new bpf_local_storage will be zero initialized.
4812 * A bpf_local_storage pointer is returned on success.
4814 * **NULL** if not found or there was an error in adding
4815 * a new bpf_local_storage.
4817 * long bpf_task_storage_delete(struct bpf_map *map, struct task_struct *task)
4819 * Delete a bpf_local_storage from a *task*.
4823 * **-ENOENT** if the bpf_local_storage cannot be found.
4825 * struct task_struct *bpf_get_current_task_btf(void)
4827 * Return a BTF pointer to the "current" task.
4828 * This pointer can also be used in helpers that accept an
4829 * *ARG_PTR_TO_BTF_ID* of type *task_struct*.
4831 * Pointer to the current task.
4833 * long bpf_bprm_opts_set(struct linux_binprm *bprm, u64 flags)
4835 * Set or clear certain options on *bprm*:
4837 * **BPF_F_BPRM_SECUREEXEC** Set the secureexec bit
4838 * which sets the **AT_SECURE** auxv for glibc. The bit
4839 * is cleared if the flag is not specified.
4841 * **-EINVAL** if invalid *flags* are passed, zero otherwise.
4843 * u64 bpf_ktime_get_coarse_ns(void)
4845 * Return a coarse-grained version of the time elapsed since
4846 * system boot, in nanoseconds. Does not include time the system
4849 * See: **clock_gettime**\ (**CLOCK_MONOTONIC_COARSE**)
4853 * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size)
4855 * Returns the stored IMA hash of the *inode* (if it's available).
4856 * If the hash is larger than *size*, then only *size*
4857 * bytes will be copied to *dst*
4859 * The **hash_algo** is returned on success,
4860 * **-EOPNOTSUP** if IMA is disabled or **-EINVAL** if
4861 * invalid arguments are passed.
4863 * struct socket *bpf_sock_from_file(struct file *file)
4865 * If the given file represents a socket, returns the associated
4868 * A pointer to a struct socket on success or NULL if the file is
4871 * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags)
4873 * Check packet size against exceeding MTU of net device (based
4874 * on *ifindex*). This helper will likely be used in combination
4875 * with helpers that adjust/change the packet size.
4877 * The argument *len_diff* can be used for querying with a planned
4878 * size change. This allows to check MTU prior to changing packet
4879 * ctx. Providing a *len_diff* adjustment that is larger than the
4880 * actual packet size (resulting in negative packet size) will in
4881 * principle not exceed the MTU, which is why it is not considered
4882 * a failure. Other BPF helpers are needed for performing the
4883 * planned size change; therefore the responsibility for catching
4884 * a negative packet size belongs in those helpers.
4886 * Specifying *ifindex* zero means the MTU check is performed
4887 * against the current net device. This is practical if this isn't
4888 * used prior to redirect.
4890 * On input *mtu_len* must be a valid pointer, else verifier will
4891 * reject BPF program. If the value *mtu_len* is initialized to
4892 * zero then the ctx packet size is use. When value *mtu_len* is
4893 * provided as input this specify the L3 length that the MTU check
4894 * is done against. Remember XDP and TC length operate at L2, but
4895 * this value is L3 as this correlate to MTU and IP-header tot_len
4896 * values which are L3 (similar behavior as bpf_fib_lookup).
4898 * The Linux kernel route table can configure MTUs on a more
4899 * specific per route level, which is not provided by this helper.
4900 * For route level MTU checks use the **bpf_fib_lookup**\ ()
4903 * *ctx* is either **struct xdp_md** for XDP programs or
4904 * **struct sk_buff** for tc cls_act programs.
4906 * The *flags* argument can be a combination of one or more of the
4909 * **BPF_MTU_CHK_SEGS**
4910 * This flag will only works for *ctx* **struct sk_buff**.
4911 * If packet context contains extra packet segment buffers
4912 * (often knows as GSO skb), then MTU check is harder to
4913 * check at this point, because in transmit path it is
4914 * possible for the skb packet to get re-segmented
4915 * (depending on net device features). This could still be
4916 * a MTU violation, so this flag enables performing MTU
4917 * check against segments, with a different violation
4918 * return code to tell it apart. Check cannot use len_diff.
4920 * On return *mtu_len* pointer contains the MTU value of the net
4921 * device. Remember the net device configured MTU is the L3 size,
4922 * which is returned here and XDP and TC length operate at L2.
4923 * Helper take this into account for you, but remember when using
4924 * MTU value in your BPF-code.
4927 * * 0 on success, and populate MTU value in *mtu_len* pointer.
4929 * * < 0 if any input argument is invalid (*mtu_len* not updated)
4931 * MTU violations return positive values, but also populate MTU
4932 * value in *mtu_len* pointer, as this can be needed for
4933 * implementing PMTU handing:
4935 * * **BPF_MTU_CHK_RET_FRAG_NEEDED**
4936 * * **BPF_MTU_CHK_RET_SEGS_TOOBIG**
4938 * long bpf_for_each_map_elem(struct bpf_map *map, void *callback_fn, void *callback_ctx, u64 flags)
4940 * For each element in **map**, call **callback_fn** function with
4941 * **map**, **callback_ctx** and other map-specific parameters.
4942 * The **callback_fn** should be a static function and
4943 * the **callback_ctx** should be a pointer to the stack.
4944 * The **flags** is used to control certain aspects of the helper.
4945 * Currently, the **flags** must be 0.
4947 * The following are a list of supported map types and their
4948 * respective expected callback signatures:
4950 * BPF_MAP_TYPE_HASH, BPF_MAP_TYPE_PERCPU_HASH,
4951 * BPF_MAP_TYPE_LRU_HASH, BPF_MAP_TYPE_LRU_PERCPU_HASH,
4952 * BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PERCPU_ARRAY
4954 * long (\*callback_fn)(struct bpf_map \*map, const void \*key, void \*value, void \*ctx);
4956 * For per_cpu maps, the map_value is the value on the cpu where the
4957 * bpf_prog is running.
4959 * If **callback_fn** return 0, the helper will continue to the next
4960 * element. If return value is 1, the helper will skip the rest of
4961 * elements and return. Other return values are not used now.
4964 * The number of traversed map elements for success, **-EINVAL** for
4965 * invalid **flags**.
4967 * long bpf_snprintf(char *str, u32 str_size, const char *fmt, u64 *data, u32 data_len)
4969 * Outputs a string into the **str** buffer of size **str_size**
4970 * based on a format string stored in a read-only map pointed by
4973 * Each format specifier in **fmt** corresponds to one u64 element
4974 * in the **data** array. For strings and pointers where pointees
4975 * are accessed, only the pointer values are stored in the *data*
4976 * array. The *data_len* is the size of *data* in bytes - must be
4979 * Formats **%s** and **%p{i,I}{4,6}** require to read kernel
4980 * memory. Reading kernel memory may fail due to either invalid
4981 * address or valid address but requiring a major memory fault. If
4982 * reading kernel memory fails, the string for **%s** will be an
4983 * empty string, and the ip address for **%p{i,I}{4,6}** will be 0.
4984 * Not returning error to bpf program is consistent with what
4985 * **bpf_trace_printk**\ () does for now.
4988 * The strictly positive length of the formatted string, including
4989 * the trailing zero character. If the return value is greater than
4990 * **str_size**, **str** contains a truncated string, guaranteed to
4991 * be zero-terminated except when **str_size** is 0.
4993 * Or **-EBUSY** if the per-CPU memory copy buffer is busy.
4995 * long bpf_sys_bpf(u32 cmd, void *attr, u32 attr_size)
4997 * Execute bpf syscall with given arguments.
5001 * long bpf_btf_find_by_name_kind(char *name, int name_sz, u32 kind, int flags)
5003 * Find BTF type with given name and kind in vmlinux BTF or in module's BTFs.
5005 * Returns btf_id and btf_obj_fd in lower and upper 32 bits.
5007 * long bpf_sys_close(u32 fd)
5009 * Execute close syscall for given FD.
5013 * long bpf_timer_init(struct bpf_timer *timer, struct bpf_map *map, u64 flags)
5015 * Initialize the timer.
5016 * First 4 bits of *flags* specify clockid.
5017 * Only CLOCK_MONOTONIC, CLOCK_REALTIME, CLOCK_BOOTTIME are allowed.
5018 * All other bits of *flags* are reserved.
5019 * The verifier will reject the program if *timer* is not from
5023 * **-EBUSY** if *timer* is already initialized.
5024 * **-EINVAL** if invalid *flags* are passed.
5025 * **-EPERM** if *timer* is in a map that doesn't have any user references.
5026 * The user space should either hold a file descriptor to a map with timers
5027 * or pin such map in bpffs. When map is unpinned or file descriptor is
5028 * closed all timers in the map will be cancelled and freed.
5030 * long bpf_timer_set_callback(struct bpf_timer *timer, void *callback_fn)
5032 * Configure the timer to call *callback_fn* static function.
5035 * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier.
5036 * **-EPERM** if *timer* is in a map that doesn't have any user references.
5037 * The user space should either hold a file descriptor to a map with timers
5038 * or pin such map in bpffs. When map is unpinned or file descriptor is
5039 * closed all timers in the map will be cancelled and freed.
5041 * long bpf_timer_start(struct bpf_timer *timer, u64 nsecs, u64 flags)
5043 * Set timer expiration N nanoseconds from the current time. The
5044 * configured callback will be invoked in soft irq context on some cpu
5045 * and will not repeat unless another bpf_timer_start() is made.
5046 * In such case the next invocation can migrate to a different cpu.
5047 * Since struct bpf_timer is a field inside map element the map
5048 * owns the timer. The bpf_timer_set_callback() will increment refcnt
5049 * of BPF program to make sure that callback_fn code stays valid.
5050 * When user space reference to a map reaches zero all timers
5051 * in a map are cancelled and corresponding program's refcnts are
5052 * decremented. This is done to make sure that Ctrl-C of a user
5053 * process doesn't leave any timers running. If map is pinned in
5054 * bpffs the callback_fn can re-arm itself indefinitely.
5055 * bpf_map_update/delete_elem() helpers and user space sys_bpf commands
5056 * cancel and free the timer in the given map element.
5057 * The map can contain timers that invoke callback_fn-s from different
5058 * programs. The same callback_fn can serve different timers from
5059 * different maps if key/value layout matches across maps.
5060 * Every bpf_timer_set_callback() can have different callback_fn.
5062 * *flags* can be one of:
5064 * **BPF_F_TIMER_ABS**
5065 * Start the timer in absolute expire value instead of the
5066 * default relative one.
5070 * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier
5071 * or invalid *flags* are passed.
5073 * long bpf_timer_cancel(struct bpf_timer *timer)
5075 * Cancel the timer and wait for callback_fn to finish if it was running.
5077 * 0 if the timer was not active.
5078 * 1 if the timer was active.
5079 * **-EINVAL** if *timer* was not initialized with bpf_timer_init() earlier.
5080 * **-EDEADLK** if callback_fn tried to call bpf_timer_cancel() on its
5081 * own timer which would have led to a deadlock otherwise.
5083 * u64 bpf_get_func_ip(void *ctx)
5085 * Get address of the traced function (for tracing and kprobe programs).
5087 * Address of the traced function.
5088 * 0 for kprobes placed within the function (not at the entry).
5090 * u64 bpf_get_attach_cookie(void *ctx)
5092 * Get bpf_cookie value provided (optionally) during the program
5093 * attachment. It might be different for each individual
5094 * attachment, even if BPF program itself is the same.
5095 * Expects BPF program context *ctx* as a first argument.
5097 * Supported for the following program types:
5102 * Value specified by user at BPF link creation/attachment time
5103 * or 0, if it was not specified.
5105 * long bpf_task_pt_regs(struct task_struct *task)
5107 * Get the struct pt_regs associated with **task**.
5109 * A pointer to struct pt_regs.
5111 * long bpf_get_branch_snapshot(void *entries, u32 size, u64 flags)
5113 * Get branch trace from hardware engines like Intel LBR. The
5114 * hardware engine is stopped shortly after the helper is
5115 * called. Therefore, the user need to filter branch entries
5116 * based on the actual use case. To capture branch trace
5117 * before the trigger point of the BPF program, the helper
5118 * should be called at the beginning of the BPF program.
5120 * The data is stored as struct perf_branch_entry into output
5121 * buffer *entries*. *size* is the size of *entries* in bytes.
5122 * *flags* is reserved for now and must be zero.
5125 * On success, number of bytes written to *buf*. On error, a
5128 * **-EINVAL** if *flags* is not zero.
5130 * **-ENOENT** if architecture does not support branch records.
5132 * long bpf_trace_vprintk(const char *fmt, u32 fmt_size, const void *data, u32 data_len)
5134 * Behaves like **bpf_trace_printk**\ () helper, but takes an array of u64
5135 * to format and can handle more format args as a result.
5137 * Arguments are to be used as in **bpf_seq_printf**\ () helper.
5139 * The number of bytes written to the buffer, or a negative error
5140 * in case of failure.
5142 * struct unix_sock *bpf_skc_to_unix_sock(void *sk)
5144 * Dynamically cast a *sk* pointer to a *unix_sock* pointer.
5146 * *sk* if casting is valid, or **NULL** otherwise.
5148 * long bpf_kallsyms_lookup_name(const char *name, int name_sz, int flags, u64 *res)
5150 * Get the address of a kernel symbol, returned in *res*. *res* is
5151 * set to 0 if the symbol is not found.
5153 * On success, zero. On error, a negative value.
5155 * **-EINVAL** if *flags* is not zero.
5157 * **-EINVAL** if string *name* is not the same size as *name_sz*.
5159 * **-ENOENT** if symbol is not found.
5161 * **-EPERM** if caller does not have permission to obtain kernel address.
5163 * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags)
5165 * Find vma of *task* that contains *addr*, call *callback_fn*
5166 * function with *task*, *vma*, and *callback_ctx*.
5167 * The *callback_fn* should be a static function and
5168 * the *callback_ctx* should be a pointer to the stack.
5169 * The *flags* is used to control certain aspects of the helper.
5170 * Currently, the *flags* must be 0.
5172 * The expected callback signature is
5174 * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx);
5178 * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*.
5179 * **-EBUSY** if failed to try lock mmap_lock.
5180 * **-EINVAL** for invalid **flags**.
5182 * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags)
5184 * For **nr_loops**, call **callback_fn** function
5185 * with **callback_ctx** as the context parameter.
5186 * The **callback_fn** should be a static function and
5187 * the **callback_ctx** should be a pointer to the stack.
5188 * The **flags** is used to control certain aspects of the helper.
5189 * Currently, the **flags** must be 0. Currently, nr_loops is
5190 * limited to 1 << 23 (~8 million) loops.
5192 * long (\*callback_fn)(u32 index, void \*ctx);
5194 * where **index** is the current index in the loop. The index
5197 * If **callback_fn** returns 0, the helper will continue to the next
5198 * loop. If return value is 1, the helper will skip the rest of
5199 * the loops and return. Other return values are not used now,
5200 * and will be rejected by the verifier.
5203 * The number of loops performed, **-EINVAL** for invalid **flags**,
5204 * **-E2BIG** if **nr_loops** exceeds the maximum number of loops.
5206 * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2)
5208 * Do strncmp() between **s1** and **s2**. **s1** doesn't need
5209 * to be null-terminated and **s1_sz** is the maximum storage
5210 * size of **s1**. **s2** must be a read-only string.
5212 * An integer less than, equal to, or greater than zero
5213 * if the first **s1_sz** bytes of **s1** is found to be
5214 * less than, to match, or be greater than **s2**.
5216 * long bpf_get_func_arg(void *ctx, u32 n, u64 *value)
5218 * Get **n**-th argument register (zero based) of the traced function (for tracing programs)
5219 * returned in **value**.
5223 * **-EINVAL** if n >= argument register count of traced function.
5225 * long bpf_get_func_ret(void *ctx, u64 *value)
5227 * Get return value of the traced function (for tracing programs)
5232 * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN.
5234 * long bpf_get_func_arg_cnt(void *ctx)
5236 * Get number of registers of the traced function (for tracing programs) where
5237 * function arguments are stored in these registers.
5240 * The number of argument registers of the traced function.
5242 * int bpf_get_retval(void)
5244 * Get the BPF program's return value that will be returned to the upper layers.
5246 * This helper is currently supported by cgroup programs and only by the hooks
5247 * where BPF program's return value is returned to the userspace via errno.
5249 * The BPF program's return value.
5251 * int bpf_set_retval(int retval)
5253 * Set the BPF program's return value that will be returned to the upper layers.
5255 * This helper is currently supported by cgroup programs and only by the hooks
5256 * where BPF program's return value is returned to the userspace via errno.
5258 * Note that there is the following corner case where the program exports an error
5259 * via bpf_set_retval but signals success via 'return 1':
5261 * bpf_set_retval(-EPERM);
5264 * In this case, the BPF program's return value will use helper's -EPERM. This
5265 * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case.
5268 * 0 on success, or a negative error in case of failure.
5270 * u64 bpf_xdp_get_buff_len(struct xdp_buff *xdp_md)
5272 * Get the total size of a given xdp buff (linear and paged area)
5274 * The total size of a given xdp buffer.
5276 * long bpf_xdp_load_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
5278 * This helper is provided as an easy way to load data from a
5279 * xdp buffer. It can be used to load *len* bytes from *offset* from
5280 * the frame associated to *xdp_md*, into the buffer pointed by
5283 * 0 on success, or a negative error in case of failure.
5285 * long bpf_xdp_store_bytes(struct xdp_buff *xdp_md, u32 offset, void *buf, u32 len)
5287 * Store *len* bytes from buffer *buf* into the frame
5288 * associated to *xdp_md*, at *offset*.
5290 * 0 on success, or a negative error in case of failure.
5292 * long bpf_copy_from_user_task(void *dst, u32 size, const void *user_ptr, struct task_struct *tsk, u64 flags)
5294 * Read *size* bytes from user space address *user_ptr* in *tsk*'s
5295 * address space, and stores the data in *dst*. *flags* is not
5296 * used yet and is provided for future extensibility. This helper
5297 * can only be used by sleepable programs.
5299 * 0 on success, or a negative error in case of failure. On error
5300 * *dst* buffer is zeroed out.
5302 * long bpf_skb_set_tstamp(struct sk_buff *skb, u64 tstamp, u32 tstamp_type)
5304 * Change the __sk_buff->tstamp_type to *tstamp_type*
5305 * and set *tstamp* to the __sk_buff->tstamp together.
5307 * If there is no need to change the __sk_buff->tstamp_type,
5308 * the tstamp value can be directly written to __sk_buff->tstamp
5311 * BPF_SKB_TSTAMP_DELIVERY_MONO is the only tstamp that
5312 * will be kept during bpf_redirect_*(). A non zero
5313 * *tstamp* must be used with the BPF_SKB_TSTAMP_DELIVERY_MONO
5316 * A BPF_SKB_TSTAMP_UNSPEC *tstamp_type* can only be used
5317 * with a zero *tstamp*.
5319 * Only IPv4 and IPv6 skb->protocol are supported.
5321 * This function is most useful when it needs to set a
5322 * mono delivery time to __sk_buff->tstamp and then
5323 * bpf_redirect_*() to the egress of an iface. For example,
5324 * changing the (rcv) timestamp in __sk_buff->tstamp at
5325 * ingress to a mono delivery time and then bpf_redirect_*()
5326 * to sch_fq@phy-dev.
5329 * **-EINVAL** for invalid input
5330 * **-EOPNOTSUPP** for unsupported protocol
5332 * long bpf_ima_file_hash(struct file *file, void *dst, u32 size)
5334 * Returns a calculated IMA hash of the *file*.
5335 * If the hash is larger than *size*, then only *size*
5336 * bytes will be copied to *dst*
5338 * The **hash_algo** is returned on success,
5339 * **-EOPNOTSUP** if the hash calculation failed or **-EINVAL** if
5340 * invalid arguments are passed.
5342 * void *bpf_kptr_xchg(void *map_value, void *ptr)
5344 * Exchange kptr at pointer *map_value* with *ptr*, and return the
5345 * old value. *ptr* can be NULL, otherwise it must be a referenced
5346 * pointer which will be released when this helper is called.
5348 * The old value of kptr (which can be NULL). The returned pointer
5349 * if not NULL, is a reference which must be released using its
5350 * corresponding release function, or moved into a BPF map before
5353 * void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu)
5355 * Perform a lookup in *percpu map* for an entry associated to
5358 * Map value associated to *key* on *cpu*, or **NULL** if no entry
5359 * was found or *cpu* is invalid.
5361 * struct mptcp_sock *bpf_skc_to_mptcp_sock(void *sk)
5363 * Dynamically cast a *sk* pointer to a *mptcp_sock* pointer.
5365 * *sk* if casting is valid, or **NULL** otherwise.
5367 * long bpf_dynptr_from_mem(void *data, u32 size, u64 flags, struct bpf_dynptr *ptr)
5369 * Get a dynptr to local memory *data*.
5371 * *data* must be a ptr to a map value.
5372 * The maximum *size* supported is DYNPTR_MAX_SIZE.
5373 * *flags* is currently unused.
5375 * 0 on success, -E2BIG if the size exceeds DYNPTR_MAX_SIZE,
5376 * -EINVAL if flags is not 0.
5378 * long bpf_ringbuf_reserve_dynptr(void *ringbuf, u32 size, u64 flags, struct bpf_dynptr *ptr)
5380 * Reserve *size* bytes of payload in a ring buffer *ringbuf*
5381 * through the dynptr interface. *flags* must be 0.
5383 * Please note that a corresponding bpf_ringbuf_submit_dynptr or
5384 * bpf_ringbuf_discard_dynptr must be called on *ptr*, even if the
5385 * reservation fails. This is enforced by the verifier.
5387 * 0 on success, or a negative error in case of failure.
5389 * void bpf_ringbuf_submit_dynptr(struct bpf_dynptr *ptr, u64 flags)
5391 * Submit reserved ring buffer sample, pointed to by *data*,
5392 * through the dynptr interface. This is a no-op if the dynptr is
5395 * For more information on *flags*, please see
5396 * 'bpf_ringbuf_submit'.
5398 * Nothing. Always succeeds.
5400 * void bpf_ringbuf_discard_dynptr(struct bpf_dynptr *ptr, u64 flags)
5402 * Discard reserved ring buffer sample through the dynptr
5403 * interface. This is a no-op if the dynptr is invalid/null.
5405 * For more information on *flags*, please see
5406 * 'bpf_ringbuf_discard'.
5408 * Nothing. Always succeeds.
5410 * long bpf_dynptr_read(void *dst, u32 len, const struct bpf_dynptr *src, u32 offset, u64 flags)
5412 * Read *len* bytes from *src* into *dst*, starting from *offset*
5414 * *flags* is currently unused.
5416 * 0 on success, -E2BIG if *offset* + *len* exceeds the length
5417 * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if
5420 * long bpf_dynptr_write(const struct bpf_dynptr *dst, u32 offset, void *src, u32 len, u64 flags)
5422 * Write *len* bytes from *src* into *dst*, starting from *offset*
5425 * *flags* must be 0 except for skb-type dynptrs.
5427 * For skb-type dynptrs:
5428 * * All data slices of the dynptr are automatically
5429 * invalidated after **bpf_dynptr_write**\ (). This is
5430 * because writing may pull the skb and change the
5431 * underlying packet buffer.
5433 * * For *flags*, please see the flags accepted by
5434 * **bpf_skb_store_bytes**\ ().
5436 * 0 on success, -E2BIG if *offset* + *len* exceeds the length
5437 * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst*
5438 * is a read-only dynptr or if *flags* is not correct. For skb-type dynptrs,
5439 * other errors correspond to errors returned by **bpf_skb_store_bytes**\ ().
5441 * void *bpf_dynptr_data(const struct bpf_dynptr *ptr, u32 offset, u32 len)
5443 * Get a pointer to the underlying dynptr data.
5445 * *len* must be a statically known value. The returned data slice
5446 * is invalidated whenever the dynptr is invalidated.
5448 * skb and xdp type dynptrs may not use bpf_dynptr_data. They should
5449 * instead use bpf_dynptr_slice and bpf_dynptr_slice_rdwr.
5451 * Pointer to the underlying dynptr data, NULL if the dynptr is
5452 * read-only, if the dynptr is invalid, or if the offset and length
5455 * s64 bpf_tcp_raw_gen_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th, u32 th_len)
5457 * Try to issue a SYN cookie for the packet with corresponding
5458 * IPv4/TCP headers, *iph* and *th*, without depending on a
5461 * *iph* points to the IPv4 header.
5463 * *th* points to the start of the TCP header, while *th_len*
5464 * contains the length of the TCP header (at least
5465 * **sizeof**\ (**struct tcphdr**)).
5467 * On success, lower 32 bits hold the generated SYN cookie in
5468 * followed by 16 bits which hold the MSS value for that cookie,
5469 * and the top 16 bits are unused.
5471 * On failure, the returned value is one of the following:
5473 * **-EINVAL** if *th_len* is invalid.
5475 * s64 bpf_tcp_raw_gen_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th, u32 th_len)
5477 * Try to issue a SYN cookie for the packet with corresponding
5478 * IPv6/TCP headers, *iph* and *th*, without depending on a
5481 * *iph* points to the IPv6 header.
5483 * *th* points to the start of the TCP header, while *th_len*
5484 * contains the length of the TCP header (at least
5485 * **sizeof**\ (**struct tcphdr**)).
5487 * On success, lower 32 bits hold the generated SYN cookie in
5488 * followed by 16 bits which hold the MSS value for that cookie,
5489 * and the top 16 bits are unused.
5491 * On failure, the returned value is one of the following:
5493 * **-EINVAL** if *th_len* is invalid.
5495 * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin.
5497 * long bpf_tcp_raw_check_syncookie_ipv4(struct iphdr *iph, struct tcphdr *th)
5499 * Check whether *iph* and *th* contain a valid SYN cookie ACK
5500 * without depending on a listening socket.
5502 * *iph* points to the IPv4 header.
5504 * *th* points to the TCP header.
5506 * 0 if *iph* and *th* are a valid SYN cookie ACK.
5508 * On failure, the returned value is one of the following:
5510 * **-EACCES** if the SYN cookie is not valid.
5512 * long bpf_tcp_raw_check_syncookie_ipv6(struct ipv6hdr *iph, struct tcphdr *th)
5514 * Check whether *iph* and *th* contain a valid SYN cookie ACK
5515 * without depending on a listening socket.
5517 * *iph* points to the IPv6 header.
5519 * *th* points to the TCP header.
5521 * 0 if *iph* and *th* are a valid SYN cookie ACK.
5523 * On failure, the returned value is one of the following:
5525 * **-EACCES** if the SYN cookie is not valid.
5527 * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin.
5529 * u64 bpf_ktime_get_tai_ns(void)
5531 * A nonsettable system-wide clock derived from wall-clock time but
5532 * ignoring leap seconds. This clock does not experience
5533 * discontinuities and backwards jumps caused by NTP inserting leap
5534 * seconds as CLOCK_REALTIME does.
5536 * See: **clock_gettime**\ (**CLOCK_TAI**)
5540 * long bpf_user_ringbuf_drain(struct bpf_map *map, void *callback_fn, void *ctx, u64 flags)
5542 * Drain samples from the specified user ring buffer, and invoke
5543 * the provided callback for each such sample:
5545 * long (\*callback_fn)(const struct bpf_dynptr \*dynptr, void \*ctx);
5547 * If **callback_fn** returns 0, the helper will continue to try
5548 * and drain the next sample, up to a maximum of
5549 * BPF_MAX_USER_RINGBUF_SAMPLES samples. If the return value is 1,
5550 * the helper will skip the rest of the samples and return. Other
5551 * return values are not used now, and will be rejected by the
5554 * The number of drained samples if no error was encountered while
5555 * draining samples, or 0 if no samples were present in the ring
5556 * buffer. If a user-space producer was epoll-waiting on this map,
5557 * and at least one sample was drained, they will receive an event
5558 * notification notifying them of available space in the ring
5559 * buffer. If the BPF_RB_NO_WAKEUP flag is passed to this
5560 * function, no wakeup notification will be sent. If the
5561 * BPF_RB_FORCE_WAKEUP flag is passed, a wakeup notification will
5562 * be sent even if no sample was drained.
5564 * On failure, the returned value is one of the following:
5566 * **-EBUSY** if the ring buffer is contended, and another calling
5567 * context was concurrently draining the ring buffer.
5569 * **-EINVAL** if user-space is not properly tracking the ring
5570 * buffer due to the producer position not being aligned to 8
5571 * bytes, a sample not being aligned to 8 bytes, or the producer
5572 * position not matching the advertised length of a sample.
5574 * **-E2BIG** if user-space has tried to publish a sample which is
5575 * larger than the size of the ring buffer, or which cannot fit
5576 * within a struct bpf_dynptr.
5578 * void *bpf_cgrp_storage_get(struct bpf_map *map, struct cgroup *cgroup, void *value, u64 flags)
5580 * Get a bpf_local_storage from the *cgroup*.
5582 * Logically, it could be thought of as getting the value from
5583 * a *map* with *cgroup* as the **key**. From this
5584 * perspective, the usage is not much different from
5585 * **bpf_map_lookup_elem**\ (*map*, **&**\ *cgroup*) except this
5586 * helper enforces the key must be a cgroup struct and the map must also
5587 * be a **BPF_MAP_TYPE_CGRP_STORAGE**.
5589 * In reality, the local-storage value is embedded directly inside of the
5590 * *cgroup* object itself, rather than being located in the
5591 * **BPF_MAP_TYPE_CGRP_STORAGE** map. When the local-storage value is
5592 * queried for some *map* on a *cgroup* object, the kernel will perform an
5593 * O(n) iteration over all of the live local-storage values for that
5594 * *cgroup* object until the local-storage value for the *map* is found.
5596 * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be
5597 * used such that a new bpf_local_storage will be
5598 * created if one does not exist. *value* can be used
5599 * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify
5600 * the initial value of a bpf_local_storage. If *value* is
5601 * **NULL**, the new bpf_local_storage will be zero initialized.
5603 * A bpf_local_storage pointer is returned on success.
5605 * **NULL** if not found or there was an error in adding
5606 * a new bpf_local_storage.
5608 * long bpf_cgrp_storage_delete(struct bpf_map *map, struct cgroup *cgroup)
5610 * Delete a bpf_local_storage from a *cgroup*.
5614 * **-ENOENT** if the bpf_local_storage cannot be found.
5616 #define ___BPF_FUNC_MAPPER(FN, ctx...) \
5617 FN(unspec, 0, ##ctx) \
5618 FN(map_lookup_elem, 1, ##ctx) \
5619 FN(map_update_elem, 2, ##ctx) \
5620 FN(map_delete_elem, 3, ##ctx) \
5621 FN(probe_read, 4, ##ctx) \
5622 FN(ktime_get_ns, 5, ##ctx) \
5623 FN(trace_printk, 6, ##ctx) \
5624 FN(get_prandom_u32, 7, ##ctx) \
5625 FN(get_smp_processor_id, 8, ##ctx) \
5626 FN(skb_store_bytes, 9, ##ctx) \
5627 FN(l3_csum_replace, 10, ##ctx) \
5628 FN(l4_csum_replace, 11, ##ctx) \
5629 FN(tail_call, 12, ##ctx) \
5630 FN(clone_redirect, 13, ##ctx) \
5631 FN(get_current_pid_tgid, 14, ##ctx) \
5632 FN(get_current_uid_gid, 15, ##ctx) \
5633 FN(get_current_comm, 16, ##ctx) \
5634 FN(get_cgroup_classid, 17, ##ctx) \
5635 FN(skb_vlan_push, 18, ##ctx) \
5636 FN(skb_vlan_pop, 19, ##ctx) \
5637 FN(skb_get_tunnel_key, 20, ##ctx) \
5638 FN(skb_set_tunnel_key, 21, ##ctx) \
5639 FN(perf_event_read, 22, ##ctx) \
5640 FN(redirect, 23, ##ctx) \
5641 FN(get_route_realm, 24, ##ctx) \
5642 FN(perf_event_output, 25, ##ctx) \
5643 FN(skb_load_bytes, 26, ##ctx) \
5644 FN(get_stackid, 27, ##ctx) \
5645 FN(csum_diff, 28, ##ctx) \
5646 FN(skb_get_tunnel_opt, 29, ##ctx) \
5647 FN(skb_set_tunnel_opt, 30, ##ctx) \
5648 FN(skb_change_proto, 31, ##ctx) \
5649 FN(skb_change_type, 32, ##ctx) \
5650 FN(skb_under_cgroup, 33, ##ctx) \
5651 FN(get_hash_recalc, 34, ##ctx) \
5652 FN(get_current_task, 35, ##ctx) \
5653 FN(probe_write_user, 36, ##ctx) \
5654 FN(current_task_under_cgroup, 37, ##ctx) \
5655 FN(skb_change_tail, 38, ##ctx) \
5656 FN(skb_pull_data, 39, ##ctx) \
5657 FN(csum_update, 40, ##ctx) \
5658 FN(set_hash_invalid, 41, ##ctx) \
5659 FN(get_numa_node_id, 42, ##ctx) \
5660 FN(skb_change_head, 43, ##ctx) \
5661 FN(xdp_adjust_head, 44, ##ctx) \
5662 FN(probe_read_str, 45, ##ctx) \
5663 FN(get_socket_cookie, 46, ##ctx) \
5664 FN(get_socket_uid, 47, ##ctx) \
5665 FN(set_hash, 48, ##ctx) \
5666 FN(setsockopt, 49, ##ctx) \
5667 FN(skb_adjust_room, 50, ##ctx) \
5668 FN(redirect_map, 51, ##ctx) \
5669 FN(sk_redirect_map, 52, ##ctx) \
5670 FN(sock_map_update, 53, ##ctx) \
5671 FN(xdp_adjust_meta, 54, ##ctx) \
5672 FN(perf_event_read_value, 55, ##ctx) \
5673 FN(perf_prog_read_value, 56, ##ctx) \
5674 FN(getsockopt, 57, ##ctx) \
5675 FN(override_return, 58, ##ctx) \
5676 FN(sock_ops_cb_flags_set, 59, ##ctx) \
5677 FN(msg_redirect_map, 60, ##ctx) \
5678 FN(msg_apply_bytes, 61, ##ctx) \
5679 FN(msg_cork_bytes, 62, ##ctx) \
5680 FN(msg_pull_data, 63, ##ctx) \
5681 FN(bind, 64, ##ctx) \
5682 FN(xdp_adjust_tail, 65, ##ctx) \
5683 FN(skb_get_xfrm_state, 66, ##ctx) \
5684 FN(get_stack, 67, ##ctx) \
5685 FN(skb_load_bytes_relative, 68, ##ctx) \
5686 FN(fib_lookup, 69, ##ctx) \
5687 FN(sock_hash_update, 70, ##ctx) \
5688 FN(msg_redirect_hash, 71, ##ctx) \
5689 FN(sk_redirect_hash, 72, ##ctx) \
5690 FN(lwt_push_encap, 73, ##ctx) \
5691 FN(lwt_seg6_store_bytes, 74, ##ctx) \
5692 FN(lwt_seg6_adjust_srh, 75, ##ctx) \
5693 FN(lwt_seg6_action, 76, ##ctx) \
5694 FN(rc_repeat, 77, ##ctx) \
5695 FN(rc_keydown, 78, ##ctx) \
5696 FN(skb_cgroup_id, 79, ##ctx) \
5697 FN(get_current_cgroup_id, 80, ##ctx) \
5698 FN(get_local_storage, 81, ##ctx) \
5699 FN(sk_select_reuseport, 82, ##ctx) \
5700 FN(skb_ancestor_cgroup_id, 83, ##ctx) \
5701 FN(sk_lookup_tcp, 84, ##ctx) \
5702 FN(sk_lookup_udp, 85, ##ctx) \
5703 FN(sk_release, 86, ##ctx) \
5704 FN(map_push_elem, 87, ##ctx) \
5705 FN(map_pop_elem, 88, ##ctx) \
5706 FN(map_peek_elem, 89, ##ctx) \
5707 FN(msg_push_data, 90, ##ctx) \
5708 FN(msg_pop_data, 91, ##ctx) \
5709 FN(rc_pointer_rel, 92, ##ctx) \
5710 FN(spin_lock, 93, ##ctx) \
5711 FN(spin_unlock, 94, ##ctx) \
5712 FN(sk_fullsock, 95, ##ctx) \
5713 FN(tcp_sock, 96, ##ctx) \
5714 FN(skb_ecn_set_ce, 97, ##ctx) \
5715 FN(get_listener_sock, 98, ##ctx) \
5716 FN(skc_lookup_tcp, 99, ##ctx) \
5717 FN(tcp_check_syncookie, 100, ##ctx) \
5718 FN(sysctl_get_name, 101, ##ctx) \
5719 FN(sysctl_get_current_value, 102, ##ctx) \
5720 FN(sysctl_get_new_value, 103, ##ctx) \
5721 FN(sysctl_set_new_value, 104, ##ctx) \
5722 FN(strtol, 105, ##ctx) \
5723 FN(strtoul, 106, ##ctx) \
5724 FN(sk_storage_get, 107, ##ctx) \
5725 FN(sk_storage_delete, 108, ##ctx) \
5726 FN(send_signal, 109, ##ctx) \
5727 FN(tcp_gen_syncookie, 110, ##ctx) \
5728 FN(skb_output, 111, ##ctx) \
5729 FN(probe_read_user, 112, ##ctx) \
5730 FN(probe_read_kernel, 113, ##ctx) \
5731 FN(probe_read_user_str, 114, ##ctx) \
5732 FN(probe_read_kernel_str, 115, ##ctx) \
5733 FN(tcp_send_ack, 116, ##ctx) \
5734 FN(send_signal_thread, 117, ##ctx) \
5735 FN(jiffies64, 118, ##ctx) \
5736 FN(read_branch_records, 119, ##ctx) \
5737 FN(get_ns_current_pid_tgid, 120, ##ctx) \
5738 FN(xdp_output, 121, ##ctx) \
5739 FN(get_netns_cookie, 122, ##ctx) \
5740 FN(get_current_ancestor_cgroup_id, 123, ##ctx) \
5741 FN(sk_assign, 124, ##ctx) \
5742 FN(ktime_get_boot_ns, 125, ##ctx) \
5743 FN(seq_printf, 126, ##ctx) \
5744 FN(seq_write, 127, ##ctx) \
5745 FN(sk_cgroup_id, 128, ##ctx) \
5746 FN(sk_ancestor_cgroup_id, 129, ##ctx) \
5747 FN(ringbuf_output, 130, ##ctx) \
5748 FN(ringbuf_reserve, 131, ##ctx) \
5749 FN(ringbuf_submit, 132, ##ctx) \
5750 FN(ringbuf_discard, 133, ##ctx) \
5751 FN(ringbuf_query, 134, ##ctx) \
5752 FN(csum_level, 135, ##ctx) \
5753 FN(skc_to_tcp6_sock, 136, ##ctx) \
5754 FN(skc_to_tcp_sock, 137, ##ctx) \
5755 FN(skc_to_tcp_timewait_sock, 138, ##ctx) \
5756 FN(skc_to_tcp_request_sock, 139, ##ctx) \
5757 FN(skc_to_udp6_sock, 140, ##ctx) \
5758 FN(get_task_stack, 141, ##ctx) \
5759 FN(load_hdr_opt, 142, ##ctx) \
5760 FN(store_hdr_opt, 143, ##ctx) \
5761 FN(reserve_hdr_opt, 144, ##ctx) \
5762 FN(inode_storage_get, 145, ##ctx) \
5763 FN(inode_storage_delete, 146, ##ctx) \
5764 FN(d_path, 147, ##ctx) \
5765 FN(copy_from_user, 148, ##ctx) \
5766 FN(snprintf_btf, 149, ##ctx) \
5767 FN(seq_printf_btf, 150, ##ctx) \
5768 FN(skb_cgroup_classid, 151, ##ctx) \
5769 FN(redirect_neigh, 152, ##ctx) \
5770 FN(per_cpu_ptr, 153, ##ctx) \
5771 FN(this_cpu_ptr, 154, ##ctx) \
5772 FN(redirect_peer, 155, ##ctx) \
5773 FN(task_storage_get, 156, ##ctx) \
5774 FN(task_storage_delete, 157, ##ctx) \
5775 FN(get_current_task_btf, 158, ##ctx) \
5776 FN(bprm_opts_set, 159, ##ctx) \
5777 FN(ktime_get_coarse_ns, 160, ##ctx) \
5778 FN(ima_inode_hash, 161, ##ctx) \
5779 FN(sock_from_file, 162, ##ctx) \
5780 FN(check_mtu, 163, ##ctx) \
5781 FN(for_each_map_elem, 164, ##ctx) \
5782 FN(snprintf, 165, ##ctx) \
5783 FN(sys_bpf, 166, ##ctx) \
5784 FN(btf_find_by_name_kind, 167, ##ctx) \
5785 FN(sys_close, 168, ##ctx) \
5786 FN(timer_init, 169, ##ctx) \
5787 FN(timer_set_callback, 170, ##ctx) \
5788 FN(timer_start, 171, ##ctx) \
5789 FN(timer_cancel, 172, ##ctx) \
5790 FN(get_func_ip, 173, ##ctx) \
5791 FN(get_attach_cookie, 174, ##ctx) \
5792 FN(task_pt_regs, 175, ##ctx) \
5793 FN(get_branch_snapshot, 176, ##ctx) \
5794 FN(trace_vprintk, 177, ##ctx) \
5795 FN(skc_to_unix_sock, 178, ##ctx) \
5796 FN(kallsyms_lookup_name, 179, ##ctx) \
5797 FN(find_vma, 180, ##ctx) \
5798 FN(loop, 181, ##ctx) \
5799 FN(strncmp, 182, ##ctx) \
5800 FN(get_func_arg, 183, ##ctx) \
5801 FN(get_func_ret, 184, ##ctx) \
5802 FN(get_func_arg_cnt, 185, ##ctx) \
5803 FN(get_retval, 186, ##ctx) \
5804 FN(set_retval, 187, ##ctx) \
5805 FN(xdp_get_buff_len, 188, ##ctx) \
5806 FN(xdp_load_bytes, 189, ##ctx) \
5807 FN(xdp_store_bytes, 190, ##ctx) \
5808 FN(copy_from_user_task, 191, ##ctx) \
5809 FN(skb_set_tstamp, 192, ##ctx) \
5810 FN(ima_file_hash, 193, ##ctx) \
5811 FN(kptr_xchg, 194, ##ctx) \
5812 FN(map_lookup_percpu_elem, 195, ##ctx) \
5813 FN(skc_to_mptcp_sock, 196, ##ctx) \
5814 FN(dynptr_from_mem, 197, ##ctx) \
5815 FN(ringbuf_reserve_dynptr, 198, ##ctx) \
5816 FN(ringbuf_submit_dynptr, 199, ##ctx) \
5817 FN(ringbuf_discard_dynptr, 200, ##ctx) \
5818 FN(dynptr_read, 201, ##ctx) \
5819 FN(dynptr_write, 202, ##ctx) \
5820 FN(dynptr_data, 203, ##ctx) \
5821 FN(tcp_raw_gen_syncookie_ipv4, 204, ##ctx) \
5822 FN(tcp_raw_gen_syncookie_ipv6, 205, ##ctx) \
5823 FN(tcp_raw_check_syncookie_ipv4, 206, ##ctx) \
5824 FN(tcp_raw_check_syncookie_ipv6, 207, ##ctx) \
5825 FN(ktime_get_tai_ns, 208, ##ctx) \
5826 FN(user_ringbuf_drain, 209, ##ctx) \
5827 FN(cgrp_storage_get, 210, ##ctx) \
5828 FN(cgrp_storage_delete, 211, ##ctx) \
5831 /* backwards-compatibility macros for users of __BPF_FUNC_MAPPER that don't
5832 * know or care about integer value that is now passed as second argument
5834 #define __BPF_FUNC_MAPPER_APPLY(name, value, FN) FN(name),
5835 #define __BPF_FUNC_MAPPER(FN) ___BPF_FUNC_MAPPER(__BPF_FUNC_MAPPER_APPLY, FN)
5837 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
5838 * function eBPF program intends to call
5840 #define __BPF_ENUM_FN(x, y) BPF_FUNC_ ## x = y,
5842 ___BPF_FUNC_MAPPER(__BPF_ENUM_FN)
5845 #undef __BPF_ENUM_FN
5847 /* All flags used by eBPF helper functions, placed here. */
5849 /* BPF_FUNC_skb_store_bytes flags. */
5851 BPF_F_RECOMPUTE_CSUM = (1ULL << 0),
5852 BPF_F_INVALIDATE_HASH = (1ULL << 1),
5855 /* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags.
5856 * First 4 bits are for passing the header field size.
5859 BPF_F_HDR_FIELD_MASK = 0xfULL,
5862 /* BPF_FUNC_l4_csum_replace flags. */
5864 BPF_F_PSEUDO_HDR = (1ULL << 4),
5865 BPF_F_MARK_MANGLED_0 = (1ULL << 5),
5866 BPF_F_MARK_ENFORCE = (1ULL << 6),
5869 /* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */
5871 BPF_F_INGRESS = (1ULL << 0),
5874 /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */
5876 BPF_F_TUNINFO_IPV6 = (1ULL << 0),
5879 /* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */
5881 BPF_F_SKIP_FIELD_MASK = 0xffULL,
5882 BPF_F_USER_STACK = (1ULL << 8),
5883 /* flags used by BPF_FUNC_get_stackid only. */
5884 BPF_F_FAST_STACK_CMP = (1ULL << 9),
5885 BPF_F_REUSE_STACKID = (1ULL << 10),
5886 /* flags used by BPF_FUNC_get_stack only. */
5887 BPF_F_USER_BUILD_ID = (1ULL << 11),
5890 /* BPF_FUNC_skb_set_tunnel_key flags. */
5892 BPF_F_ZERO_CSUM_TX = (1ULL << 1),
5893 BPF_F_DONT_FRAGMENT = (1ULL << 2),
5894 BPF_F_SEQ_NUMBER = (1ULL << 3),
5895 BPF_F_NO_TUNNEL_KEY = (1ULL << 4),
5898 /* BPF_FUNC_skb_get_tunnel_key flags. */
5900 BPF_F_TUNINFO_FLAGS = (1ULL << 4),
5903 /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and
5904 * BPF_FUNC_perf_event_read_value flags.
5907 BPF_F_INDEX_MASK = 0xffffffffULL,
5908 BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK,
5909 /* BPF_FUNC_perf_event_output for sk_buff input context. */
5910 BPF_F_CTXLEN_MASK = (0xfffffULL << 32),
5913 /* Current network namespace */
5915 BPF_F_CURRENT_NETNS = (-1L),
5918 /* BPF_FUNC_csum_level level values. */
5920 BPF_CSUM_LEVEL_QUERY,
5923 BPF_CSUM_LEVEL_RESET,
5926 /* BPF_FUNC_skb_adjust_room flags. */
5928 BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0),
5929 BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1),
5930 BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2),
5931 BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3),
5932 BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4),
5933 BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5),
5934 BPF_F_ADJ_ROOM_ENCAP_L2_ETH = (1ULL << 6),
5935 BPF_F_ADJ_ROOM_DECAP_L3_IPV4 = (1ULL << 7),
5936 BPF_F_ADJ_ROOM_DECAP_L3_IPV6 = (1ULL << 8),
5940 BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff,
5941 BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56,
5944 #define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \
5945 BPF_ADJ_ROOM_ENCAP_L2_MASK) \
5946 << BPF_ADJ_ROOM_ENCAP_L2_SHIFT)
5948 /* BPF_FUNC_sysctl_get_name flags. */
5950 BPF_F_SYSCTL_BASE_NAME = (1ULL << 0),
5953 /* BPF_FUNC_<kernel_obj>_storage_get flags */
5955 BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0),
5956 /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility
5957 * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead.
5959 BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE,
5962 /* BPF_FUNC_read_branch_records flags. */
5964 BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0),
5967 /* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and
5968 * BPF_FUNC_bpf_ringbuf_output flags.
5971 BPF_RB_NO_WAKEUP = (1ULL << 0),
5972 BPF_RB_FORCE_WAKEUP = (1ULL << 1),
5975 /* BPF_FUNC_bpf_ringbuf_query flags */
5977 BPF_RB_AVAIL_DATA = 0,
5978 BPF_RB_RING_SIZE = 1,
5979 BPF_RB_CONS_POS = 2,
5980 BPF_RB_PROD_POS = 3,
5983 /* BPF ring buffer constants */
5985 BPF_RINGBUF_BUSY_BIT = (1U << 31),
5986 BPF_RINGBUF_DISCARD_BIT = (1U << 30),
5987 BPF_RINGBUF_HDR_SZ = 8,
5990 /* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */
5992 BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0),
5993 BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1),
5996 /* Mode for BPF_FUNC_skb_adjust_room helper. */
5997 enum bpf_adj_room_mode {
6002 /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */
6003 enum bpf_hdr_start_off {
6008 /* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */
6009 enum bpf_lwt_encap_mode {
6011 BPF_LWT_ENCAP_SEG6_INLINE,
6015 /* Flags for bpf_bprm_opts_set helper */
6017 BPF_F_BPRM_SECUREEXEC = (1ULL << 0),
6020 /* Flags for bpf_redirect_map helper */
6022 BPF_F_BROADCAST = (1ULL << 3),
6023 BPF_F_EXCLUDE_INGRESS = (1ULL << 4),
6026 #define __bpf_md_ptr(type, name) \
6030 } __attribute__((aligned(8)))
6033 BPF_SKB_TSTAMP_UNSPEC,
6034 BPF_SKB_TSTAMP_DELIVERY_MONO, /* tstamp has mono delivery time */
6035 /* For any BPF_SKB_TSTAMP_* that the bpf prog cannot handle,
6036 * the bpf prog should handle it like BPF_SKB_TSTAMP_UNSPEC
6037 * and try to deduce it by ingress, egress or skb->sk->sk_clockid.
6041 /* user accessible mirror of in-kernel sk_buff.
6042 * new fields can only be added to the end of this structure
6048 __u32 queue_mapping;
6054 __u32 ingress_ifindex;
6064 /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */
6066 __u32 remote_ip4; /* Stored in network byte order */
6067 __u32 local_ip4; /* Stored in network byte order */
6068 __u32 remote_ip6[4]; /* Stored in network byte order */
6069 __u32 local_ip6[4]; /* Stored in network byte order */
6070 __u32 remote_port; /* Stored in network byte order */
6071 __u32 local_port; /* stored in host byte order */
6075 __bpf_md_ptr(struct bpf_flow_keys *, flow_keys);
6079 __bpf_md_ptr(struct bpf_sock *, sk);
6082 __u32 :24; /* Padding, future use. */
6086 struct bpf_tunnel_key {
6090 __u32 remote_ipv6[4];
6095 __u16 tunnel_ext; /* compat */
6096 __be16 tunnel_flags;
6101 __u32 local_ipv6[4];
6105 /* user accessible mirror of in-kernel xfrm_state.
6106 * new fields can only be added to the end of this structure
6108 struct bpf_xfrm_state {
6110 __u32 spi; /* Stored in network byte order */
6112 __u16 ext; /* Padding, future use. */
6114 __u32 remote_ipv4; /* Stored in network byte order */
6115 __u32 remote_ipv6[4]; /* Stored in network byte order */
6119 /* Generic BPF return codes which all BPF program types may support.
6120 * The values are binary compatible with their TC_ACT_* counter-part to
6121 * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
6124 * XDP is handled seprately, see XDP_*.
6132 /* >127 are reserved for prog type specific return codes.
6134 * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and
6135 * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been
6136 * changed and should be routed based on its new L3 header.
6137 * (This is an L3 redirect, as opposed to L2 redirect
6138 * represented by BPF_REDIRECT above).
6140 BPF_LWT_REROUTE = 128,
6141 /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR
6142 * to indicate that no custom dissection was performed, and
6143 * fallback to standard dissector is requested.
6145 BPF_FLOW_DISSECTOR_CONTINUE = 129,
6155 /* IP address also allows 1 and 2 bytes access */
6158 __u32 src_port; /* host byte order */
6159 __be16 dst_port; /* network byte order */
6160 __u16 :16; /* zero padding */
6164 __s32 rx_queue_mapping;
6167 struct bpf_tcp_sock {
6168 __u32 snd_cwnd; /* Sending congestion window */
6169 __u32 srtt_us; /* smoothed round trip time << 3 in usecs */
6171 __u32 snd_ssthresh; /* Slow start size threshold */
6172 __u32 rcv_nxt; /* What we want to receive next */
6173 __u32 snd_nxt; /* Next sequence we send */
6174 __u32 snd_una; /* First byte we want an ack for */
6175 __u32 mss_cache; /* Cached effective mss, not including SACKS */
6176 __u32 ecn_flags; /* ECN status bits. */
6177 __u32 rate_delivered; /* saved rate sample: packets delivered */
6178 __u32 rate_interval_us; /* saved rate sample: time elapsed */
6179 __u32 packets_out; /* Packets which are "in flight" */
6180 __u32 retrans_out; /* Retransmitted packets out */
6181 __u32 total_retrans; /* Total retransmits for entire connection */
6182 __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn
6183 * total number of segments in.
6185 __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn
6186 * total number of data segments in.
6188 __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut
6189 * The total number of segments sent.
6191 __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut
6192 * total number of data segments sent.
6194 __u32 lost_out; /* Lost packets */
6195 __u32 sacked_out; /* SACK'd packets */
6196 __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived
6197 * sum(delta(rcv_nxt)), or how many bytes
6200 __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked
6201 * sum(delta(snd_una)), or how many bytes
6204 __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups
6205 * total number of DSACK blocks received
6207 __u32 delivered; /* Total data packets delivered incl. rexmits */
6208 __u32 delivered_ce; /* Like the above but only ECE marked packets */
6209 __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */
6212 struct bpf_sock_tuple {
6229 /* (Simplified) user return codes for tcx prog type.
6230 * A valid tcx program must return one of these defined values. All other
6231 * return codes are reserved for future use. Must remain compatible with
6232 * their TC_ACT_* counter-parts. For compatibility in behavior, unknown
6233 * return codes are mapped to TCX_NEXT.
6235 enum tcx_action_base {
6242 struct bpf_xdp_sock {
6246 #define XDP_PACKET_HEADROOM 256
6248 /* User return codes for XDP prog type.
6249 * A valid XDP program must return one of these defined values. All other
6250 * return codes are reserved for future use. Unknown return codes will
6251 * result in packet drops and a warning via bpf_warn_invalid_xdp_action().
6261 /* user accessible metadata for XDP packet hook
6262 * new fields must be added to the end of this structure
6268 /* Below access go through struct xdp_rxq_info */
6269 __u32 ingress_ifindex; /* rxq->dev->ifindex */
6270 __u32 rx_queue_index; /* rxq->queue_index */
6272 __u32 egress_ifindex; /* txq->dev->ifindex */
6275 /* DEVMAP map-value layout
6277 * The struct data-layout of map-value is a configuration interface.
6278 * New members can only be added to the end of this structure.
6280 struct bpf_devmap_val {
6281 __u32 ifindex; /* device index */
6283 int fd; /* prog fd on map write */
6284 __u32 id; /* prog id on map read */
6288 /* CPUMAP map-value layout
6290 * The struct data-layout of map-value is a configuration interface.
6291 * New members can only be added to the end of this structure.
6293 struct bpf_cpumap_val {
6294 __u32 qsize; /* queue size to remote target CPU */
6296 int fd; /* prog fd on map write */
6297 __u32 id; /* prog id on map read */
6306 /* user accessible metadata for SK_MSG packet hook, new fields must
6307 * be added to the end of this structure
6310 __bpf_md_ptr(void *, data);
6311 __bpf_md_ptr(void *, data_end);
6314 __u32 remote_ip4; /* Stored in network byte order */
6315 __u32 local_ip4; /* Stored in network byte order */
6316 __u32 remote_ip6[4]; /* Stored in network byte order */
6317 __u32 local_ip6[4]; /* Stored in network byte order */
6318 __u32 remote_port; /* Stored in network byte order */
6319 __u32 local_port; /* stored in host byte order */
6320 __u32 size; /* Total size of sk_msg */
6322 __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */
6325 struct sk_reuseport_md {
6327 * Start of directly accessible data. It begins from
6328 * the tcp/udp header.
6330 __bpf_md_ptr(void *, data);
6331 /* End of directly accessible data */
6332 __bpf_md_ptr(void *, data_end);
6334 * Total length of packet (starting from the tcp/udp header).
6335 * Note that the directly accessible bytes (data_end - data)
6336 * could be less than this "len". Those bytes could be
6337 * indirectly read by a helper "bpf_skb_load_bytes()".
6341 * Eth protocol in the mac header (network byte order). e.g.
6342 * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD)
6345 __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */
6346 __u32 bind_inany; /* Is sock bound to an INANY address? */
6347 __u32 hash; /* A hash of the packet 4 tuples */
6348 /* When reuse->migrating_sk is NULL, it is selecting a sk for the
6349 * new incoming connection request (e.g. selecting a listen sk for
6350 * the received SYN in the TCP case). reuse->sk is one of the sk
6351 * in the reuseport group. The bpf prog can use reuse->sk to learn
6352 * the local listening ip/port without looking into the skb.
6354 * When reuse->migrating_sk is not NULL, reuse->sk is closed and
6355 * reuse->migrating_sk is the socket that needs to be migrated
6356 * to another listening socket. migrating_sk could be a fullsock
6357 * sk that is fully established or a reqsk that is in-the-middle
6358 * of 3-way handshake.
6360 __bpf_md_ptr(struct bpf_sock *, sk);
6361 __bpf_md_ptr(struct bpf_sock *, migrating_sk);
6364 #define BPF_TAG_SIZE 8
6366 struct bpf_prog_info {
6369 __u8 tag[BPF_TAG_SIZE];
6370 __u32 jited_prog_len;
6371 __u32 xlated_prog_len;
6372 __aligned_u64 jited_prog_insns;
6373 __aligned_u64 xlated_prog_insns;
6374 __u64 load_time; /* ns since boottime */
6375 __u32 created_by_uid;
6377 __aligned_u64 map_ids;
6378 char name[BPF_OBJ_NAME_LEN];
6380 __u32 gpl_compatible:1;
6381 __u32 :31; /* alignment pad */
6384 __u32 nr_jited_ksyms;
6385 __u32 nr_jited_func_lens;
6386 __aligned_u64 jited_ksyms;
6387 __aligned_u64 jited_func_lens;
6389 __u32 func_info_rec_size;
6390 __aligned_u64 func_info;
6393 __aligned_u64 line_info;
6394 __aligned_u64 jited_line_info;
6395 __u32 nr_jited_line_info;
6396 __u32 line_info_rec_size;
6397 __u32 jited_line_info_rec_size;
6399 __aligned_u64 prog_tags;
6402 __u64 recursion_misses;
6403 __u32 verified_insns;
6404 __u32 attach_btf_obj_id;
6405 __u32 attach_btf_id;
6406 } __attribute__((aligned(8)));
6408 struct bpf_map_info {
6415 char name[BPF_OBJ_NAME_LEN];
6417 __u32 btf_vmlinux_value_type_id;
6421 __u32 btf_key_type_id;
6422 __u32 btf_value_type_id;
6423 __u32 :32; /* alignment pad */
6425 } __attribute__((aligned(8)));
6427 struct bpf_btf_info {
6434 } __attribute__((aligned(8)));
6436 struct bpf_link_info {
6442 __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */
6443 __u32 tp_name_len; /* in/out: tp_name buffer len */
6447 __u32 target_obj_id; /* prog_id for PROG_EXT, otherwise btf object id */
6448 __u32 target_btf_id; /* BTF type id inside the object */
6455 __aligned_u64 target_name; /* in/out: target_name buffer ptr */
6456 __u32 target_name_len; /* in/out: target_name buffer len */
6458 /* If the iter specific field is 32 bits, it can be put
6459 * in the first or second union. Otherwise it should be
6460 * put in the second union.
6495 __aligned_u64 addrs;
6496 __u32 count; /* in/out: kprobe_multi function count */
6500 __u32 type; /* enum bpf_perf_event_type */
6504 __aligned_u64 file_name; /* in/out */
6506 __u32 offset; /* offset from file_name */
6507 } uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */
6509 __aligned_u64 func_name; /* in/out */
6511 __u32 offset; /* offset from func_name */
6513 } kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */
6515 __aligned_u64 tp_name; /* in/out */
6517 } tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */
6521 } event; /* BPF_PERF_EVENT_EVENT */
6529 } __attribute__((aligned(8)));
6531 /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed
6532 * by user and intended to be used by socket (e.g. to bind to, depends on
6535 struct bpf_sock_addr {
6536 __u32 user_family; /* Allows 4-byte read, but no write. */
6537 __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write.
6538 * Stored in network byte order.
6540 __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write.
6541 * Stored in network byte order.
6543 __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write.
6544 * Stored in network byte order
6546 __u32 family; /* Allows 4-byte read, but no write */
6547 __u32 type; /* Allows 4-byte read, but no write */
6548 __u32 protocol; /* Allows 4-byte read, but no write */
6549 __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write.
6550 * Stored in network byte order.
6552 __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write.
6553 * Stored in network byte order.
6555 __bpf_md_ptr(struct bpf_sock *, sk);
6558 /* User bpf_sock_ops struct to access socket values and specify request ops
6559 * and their replies.
6560 * Some of this fields are in network (bigendian) byte order and may need
6561 * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h).
6562 * New fields can only be added at the end of this structure
6564 struct bpf_sock_ops {
6567 __u32 args[4]; /* Optionally passed to bpf program */
6568 __u32 reply; /* Returned by bpf program */
6569 __u32 replylong[4]; /* Optionally returned by bpf prog */
6572 __u32 remote_ip4; /* Stored in network byte order */
6573 __u32 local_ip4; /* Stored in network byte order */
6574 __u32 remote_ip6[4]; /* Stored in network byte order */
6575 __u32 local_ip6[4]; /* Stored in network byte order */
6576 __u32 remote_port; /* Stored in network byte order */
6577 __u32 local_port; /* stored in host byte order */
6578 __u32 is_fullsock; /* Some TCP fields are only valid if
6579 * there is a full socket. If not, the
6580 * fields read as zero.
6583 __u32 srtt_us; /* Averaged RTT << 3 in usecs */
6584 __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */
6593 __u32 rate_delivered;
6594 __u32 rate_interval_us;
6597 __u32 total_retrans;
6601 __u32 data_segs_out;
6605 __u64 bytes_received;
6607 __bpf_md_ptr(struct bpf_sock *, sk);
6608 /* [skb_data, skb_data_end) covers the whole TCP header.
6610 * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received
6611 * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the
6612 * header has not been written.
6613 * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have
6614 * been written so far.
6615 * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes
6617 * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes
6620 * bpf_load_hdr_opt() can also be used to read a particular option.
6622 __bpf_md_ptr(void *, skb_data);
6623 __bpf_md_ptr(void *, skb_data_end);
6624 __u32 skb_len; /* The total length of a packet.
6625 * It includes the header, options,
6628 __u32 skb_tcp_flags; /* tcp_flags of the header. It provides
6629 * an easy way to check for tcp_flags
6630 * without parsing skb_data.
6632 * In particular, the skb_tcp_flags
6633 * will still be available in
6634 * BPF_SOCK_OPS_HDR_OPT_LEN even though
6635 * the outgoing header has not
6641 /* Definitions for bpf_sock_ops_cb_flags */
6643 BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0),
6644 BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1),
6645 BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2),
6646 BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3),
6647 /* Call bpf for all received TCP headers. The bpf prog will be
6648 * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB
6650 * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB
6651 * for the header option related helpers that will be useful
6652 * to the bpf programs.
6654 * It could be used at the client/active side (i.e. connect() side)
6655 * when the server told it that the server was in syncookie
6656 * mode and required the active side to resend the bpf-written
6657 * options. The active side can keep writing the bpf-options until
6658 * it received a valid packet from the server side to confirm
6659 * the earlier packet (and options) has been received. The later
6660 * example patch is using it like this at the active side when the
6661 * server is in syncookie mode.
6663 * The bpf prog will usually turn this off in the common cases.
6665 BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4),
6666 /* Call bpf when kernel has received a header option that
6667 * the kernel cannot handle. The bpf prog will be called under
6668 * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB.
6670 * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB
6671 * for the header option related helpers that will be useful
6672 * to the bpf programs.
6674 BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5),
6675 /* Call bpf when the kernel is writing header options for the
6676 * outgoing packet. The bpf prog will first be called
6677 * to reserve space in a skb under
6678 * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then
6679 * the bpf prog will be called to write the header option(s)
6680 * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
6682 * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB
6683 * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option
6684 * related helpers that will be useful to the bpf programs.
6686 * The kernel gets its chance to reserve space and write
6687 * options first before the BPF program does.
6689 BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6),
6690 /* Mask of all currently supported cb flags */
6691 BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F,
6694 /* List of known BPF sock_ops operators.
6695 * New entries can only be added at the end
6699 BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or
6700 * -1 if default value should be used
6702 BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized
6703 * window (in packets) or -1 if default
6704 * value should be used
6706 BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an
6707 * active connection is initialized
6709 BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an
6710 * active connection is
6713 BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a
6714 * passive connection is
6717 BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control
6720 BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is
6721 * based on the path and may be
6722 * dependent on the congestion control
6723 * algorithm. In general it indicates
6724 * a congestion threshold. RTTs above
6725 * this indicate congestion
6727 BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered.
6728 * Arg1: value of icsk_retransmits
6729 * Arg2: value of icsk_rto
6730 * Arg3: whether RTO has expired
6732 BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted.
6733 * Arg1: sequence number of 1st byte
6735 * Arg3: return value of
6736 * tcp_transmit_skb (0 => success)
6738 BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state.
6742 BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after
6743 * socket transition to LISTEN state.
6745 BPF_SOCK_OPS_RTT_CB, /* Called on every RTT.
6747 BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option.
6748 * It will be called to handle
6749 * the packets received at
6750 * an already established
6753 * sock_ops->skb_data:
6754 * Referring to the received skb.
6755 * It covers the TCP header only.
6757 * bpf_load_hdr_opt() can also
6758 * be used to search for a
6759 * particular option.
6761 BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the
6762 * header option later in
6763 * BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
6764 * Arg1: bool want_cookie. (in
6765 * writing SYNACK only)
6767 * sock_ops->skb_data:
6768 * Not available because no header has
6771 * sock_ops->skb_tcp_flags:
6772 * The tcp_flags of the
6773 * outgoing skb. (e.g. SYN, ACK, FIN).
6775 * bpf_reserve_hdr_opt() should
6776 * be used to reserve space.
6778 BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options
6779 * Arg1: bool want_cookie. (in
6780 * writing SYNACK only)
6782 * sock_ops->skb_data:
6783 * Referring to the outgoing skb.
6784 * It covers the TCP header
6785 * that has already been written
6786 * by the kernel and the
6787 * earlier bpf-progs.
6789 * sock_ops->skb_tcp_flags:
6790 * The tcp_flags of the outgoing
6791 * skb. (e.g. SYN, ACK, FIN).
6793 * bpf_store_hdr_opt() should
6794 * be used to write the
6797 * bpf_load_hdr_opt() can also
6798 * be used to search for a
6799 * particular option that
6800 * has already been written
6801 * by the kernel or the
6802 * earlier bpf-progs.
6806 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
6807 * changes between the TCP and BPF versions. Ideally this should never happen.
6808 * If it does, we need to add code to convert them before calling
6809 * the BPF sock_ops function.
6812 BPF_TCP_ESTABLISHED = 1,
6822 BPF_TCP_CLOSING, /* Now a valid state */
6823 BPF_TCP_NEW_SYN_RECV,
6825 BPF_TCP_MAX_STATES /* Leave at the end! */
6829 TCP_BPF_IW = 1001, /* Set TCP initial congestion window */
6830 TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */
6831 TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */
6832 TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */
6833 /* Copy the SYN pkt to optval
6835 * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the
6836 * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit
6837 * to only getting from the saved_syn. It can either get the
6840 * 1. the just-received SYN packet (only available when writing the
6841 * SYNACK). It will be useful when it is not necessary to
6842 * save the SYN packet for latter use. It is also the only way
6843 * to get the SYN during syncookie mode because the syn
6844 * packet cannot be saved during syncookie.
6848 * 2. the earlier saved syn which was done by
6849 * bpf_setsockopt(TCP_SAVE_SYN).
6851 * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the
6852 * SYN packet is obtained.
6854 * If the bpf-prog does not need the IP[46] header, the
6855 * bpf-prog can avoid parsing the IP header by using
6856 * TCP_BPF_SYN. Otherwise, the bpf-prog can get both
6857 * IP[46] and TCP header by using TCP_BPF_SYN_IP.
6859 * >0: Total number of bytes copied
6860 * -ENOSPC: Not enough space in optval. Only optlen number of
6862 * -ENOENT: The SYN skb is not available now and the earlier SYN pkt
6863 * is not saved by setsockopt(TCP_SAVE_SYN).
6865 TCP_BPF_SYN = 1005, /* Copy the TCP header */
6866 TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */
6867 TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */
6871 BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0),
6874 /* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and
6875 * BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
6878 BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the
6879 * total option spaces
6880 * required for an established
6881 * sk in order to calculate the
6882 * MSS. No skb is actually
6885 BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode
6886 * when sending a SYN.
6890 struct bpf_perf_event_value {
6897 BPF_DEVCG_ACC_MKNOD = (1ULL << 0),
6898 BPF_DEVCG_ACC_READ = (1ULL << 1),
6899 BPF_DEVCG_ACC_WRITE = (1ULL << 2),
6903 BPF_DEVCG_DEV_BLOCK = (1ULL << 0),
6904 BPF_DEVCG_DEV_CHAR = (1ULL << 1),
6907 struct bpf_cgroup_dev_ctx {
6908 /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */
6914 struct bpf_raw_tracepoint_args {
6918 /* DIRECT: Skip the FIB rules and go to FIB table associated with device
6919 * OUTPUT: Do lookup from egress perspective; default is ingress
6922 BPF_FIB_LOOKUP_DIRECT = (1U << 0),
6923 BPF_FIB_LOOKUP_OUTPUT = (1U << 1),
6924 BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
6925 BPF_FIB_LOOKUP_TBID = (1U << 3),
6929 BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */
6930 BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */
6931 BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */
6932 BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */
6933 BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */
6934 BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */
6935 BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */
6936 BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */
6937 BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */
6940 struct bpf_fib_lookup {
6941 /* input: network family for lookup (AF_INET, AF_INET6)
6942 * output: network family of egress nexthop
6946 /* set if lookup is to consider L4 data - e.g., FIB rules */
6951 union { /* used for MTU check */
6952 /* input to lookup */
6953 __u16 tot_len; /* L3 length from network hdr (iph->tot_len) */
6955 /* output: MTU value */
6958 /* input: L3 device index for lookup
6959 * output: device index from FIB lookup
6964 /* inputs to lookup */
6965 __u8 tos; /* AF_INET */
6966 __be32 flowinfo; /* AF_INET6, flow_label + priority */
6968 /* output: metric of fib result (IPv4/IPv6 only) */
6974 __u32 ipv6_src[4]; /* in6_addr; network order */
6977 /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in
6978 * network header. output: bpf_fib_lookup sets to gateway address
6979 * if FIB lookup returns gateway route
6983 __u32 ipv6_dst[4]; /* in6_addr; network order */
6989 __be16 h_vlan_proto;
6992 /* input: when accompanied with the
6993 * 'BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID` flags, a
6994 * specific routing table to use for the fib lookup.
6999 __u8 smac[6]; /* ETH_ALEN */
7000 __u8 dmac[6]; /* ETH_ALEN */
7003 struct bpf_redir_neigh {
7004 /* network family for lookup (AF_INET, AF_INET6) */
7006 /* network address of nexthop; skips fib lookup to find gateway */
7009 __u32 ipv6_nh[4]; /* in6_addr; network order */
7013 /* bpf_check_mtu flags*/
7014 enum bpf_check_mtu_flags {
7015 BPF_MTU_CHK_SEGS = (1U << 0),
7018 enum bpf_check_mtu_ret {
7019 BPF_MTU_CHK_RET_SUCCESS, /* check and lookup successful */
7020 BPF_MTU_CHK_RET_FRAG_NEEDED, /* fragmentation required to fwd */
7021 BPF_MTU_CHK_RET_SEGS_TOOBIG, /* GSO re-segmentation needed to fwd */
7024 enum bpf_task_fd_type {
7025 BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */
7026 BPF_FD_TYPE_TRACEPOINT, /* tp name */
7027 BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */
7028 BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */
7029 BPF_FD_TYPE_UPROBE, /* filename + offset */
7030 BPF_FD_TYPE_URETPROBE, /* filename + offset */
7034 BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0),
7035 BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1),
7036 BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2),
7039 struct bpf_flow_keys {
7042 __u16 addr_proto; /* ETH_P_* of valid addrs */
7056 __u32 ipv6_src[4]; /* in6_addr; network order */
7057 __u32 ipv6_dst[4]; /* in6_addr; network order */
7064 struct bpf_func_info {
7069 #define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10)
7070 #define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff)
7072 struct bpf_line_info {
7074 __u32 file_name_off;
7079 struct bpf_spin_lock {
7086 } __attribute__((aligned(8)));
7091 } __attribute__((aligned(8)));
7093 struct bpf_list_head {
7096 } __attribute__((aligned(8)));
7098 struct bpf_list_node {
7101 } __attribute__((aligned(8)));
7103 struct bpf_rb_root {
7106 } __attribute__((aligned(8)));
7108 struct bpf_rb_node {
7112 } __attribute__((aligned(8)));
7114 struct bpf_refcount {
7116 } __attribute__((aligned(4)));
7119 __u32 write; /* Sysctl is being read (= 0) or written (= 1).
7120 * Allows 1,2,4-byte read, but no write.
7122 __u32 file_pos; /* Sysctl file position to read from, write to.
7123 * Allows 1,2,4-byte read an 4-byte write.
7127 struct bpf_sockopt {
7128 __bpf_md_ptr(struct bpf_sock *, sk);
7129 __bpf_md_ptr(void *, optval);
7130 __bpf_md_ptr(void *, optval_end);
7138 struct bpf_pidns_info {
7143 /* User accessible data for SK_LOOKUP programs. Add new fields at the end. */
7144 struct bpf_sk_lookup {
7146 __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */
7147 __u64 cookie; /* Non-zero if socket was selected in PROG_TEST_RUN */
7150 __u32 family; /* Protocol family (AF_INET, AF_INET6) */
7151 __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */
7152 __u32 remote_ip4; /* Network byte order */
7153 __u32 remote_ip6[4]; /* Network byte order */
7154 __be16 remote_port; /* Network byte order */
7155 __u16 :16; /* Zero padding */
7156 __u32 local_ip4; /* Network byte order */
7157 __u32 local_ip6[4]; /* Network byte order */
7158 __u32 local_port; /* Host byte order */
7159 __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */
7163 * struct btf_ptr is used for typed pointer representation; the
7164 * type id is used to render the pointer data as the appropriate type
7165 * via the bpf_snprintf_btf() helper described above. A flags field -
7166 * potentially to specify additional details about the BTF pointer
7167 * (rather than its mode of display) - is included for future use.
7168 * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately.
7173 __u32 flags; /* BTF ptr flags; unused at present. */
7177 * Flags to control bpf_snprintf_btf() behaviour.
7178 * - BTF_F_COMPACT: no formatting around type information
7179 * - BTF_F_NONAME: no struct/union member names/types
7180 * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
7181 * equivalent to %px.
7182 * - BTF_F_ZERO: show zero-valued struct/union members; they
7183 * are not displayed by default
7186 BTF_F_COMPACT = (1ULL << 0),
7187 BTF_F_NONAME = (1ULL << 1),
7188 BTF_F_PTR_RAW = (1ULL << 2),
7189 BTF_F_ZERO = (1ULL << 3),
7192 /* bpf_core_relo_kind encodes which aspect of captured field/type/enum value
7193 * has to be adjusted by relocations. It is emitted by llvm and passed to
7194 * libbpf and later to the kernel.
7196 enum bpf_core_relo_kind {
7197 BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */
7198 BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */
7199 BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */
7200 BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */
7201 BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */
7202 BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */
7203 BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */
7204 BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */
7205 BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */
7206 BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */
7207 BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */
7208 BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */
7209 BPF_CORE_TYPE_MATCHES = 12, /* type match in target kernel */
7213 * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf
7214 * and from libbpf to the kernel.
7216 * CO-RE relocation captures the following data:
7217 * - insn_off - instruction offset (in bytes) within a BPF program that needs
7218 * its insn->imm field to be relocated with actual field info;
7219 * - type_id - BTF type ID of the "root" (containing) entity of a relocatable
7221 * - access_str_off - offset into corresponding .BTF string section. String
7222 * interpretation depends on specific relocation kind:
7223 * - for field-based relocations, string encodes an accessed field using
7224 * a sequence of field and array indices, separated by colon (:). It's
7225 * conceptually very close to LLVM's getelementptr ([0]) instruction's
7226 * arguments for identifying offset to a field.
7227 * - for type-based relocations, strings is expected to be just "0";
7228 * - for enum value-based relocations, string contains an index of enum
7229 * value within its enum type;
7230 * - kind - one of enum bpf_core_relo_kind;
7240 * struct sample *s = ...;
7241 * int *x = &s->a; // encoded as "0:0" (a is field #0)
7242 * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1,
7243 * // b is field #0 inside anon struct, accessing elem #5)
7244 * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array)
7246 * type_id for all relocs in this example will capture BTF type id of
7249 * Such relocation is emitted when using __builtin_preserve_access_index()
7250 * Clang built-in, passing expression that captures field address, e.g.:
7252 * bpf_probe_read(&dst, sizeof(dst),
7253 * __builtin_preserve_access_index(&src->a.b.c));
7255 * In this case Clang will emit field relocation recording necessary data to
7256 * be able to find offset of embedded `a.b.c` field within `src` struct.
7258 * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction
7260 struct bpf_core_relo {
7263 __u32 access_str_off;
7264 enum bpf_core_relo_kind kind;
7268 * Flags to control bpf_timer_start() behaviour.
7269 * - BPF_F_TIMER_ABS: Timeout passed is absolute time, by default it is
7270 * relative to current time.
7273 BPF_F_TIMER_ABS = (1ULL << 0),
7276 /* BPF numbers iterator state */
7277 struct bpf_iter_num {
7278 /* opaque iterator state; having __u64 here allows to preserve correct
7279 * alignment requirements in vmlinux.h, generated from BTF
7282 } __attribute__((aligned(8)));
7284 #endif /* _UAPI__LINUX_BPF_H__ */
projects / platform / kernel / linux-starfive.git / blob