3 * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
9 * SPDX-License-Identifier: GPL-2.0+
12 #include "imagetool.h"
16 #define UNDEFINED 0xFFFFFFFF
19 * Supported commands for configuration file
21 static table_entry_t imximage_cmds[] = {
22 {CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
23 {CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", },
24 {CMD_WRITE_DATA, "DATA", "Reg Write Data", },
25 {CMD_WRITE_CLR_BIT, "CLR_BIT", "Reg clear bit", },
26 {CMD_CHECK_BITS_SET, "CHECK_BITS_SET", "Reg Check bits set", },
27 {CMD_CHECK_BITS_CLR, "CHECK_BITS_CLR", "Reg Check bits clr", },
28 {CMD_CSF, "CSF", "Command Sequence File", },
29 {CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", },
34 * Supported Boot options for configuration file
35 * this is needed to set the correct flash offset
37 static table_entry_t imximage_boot_offset[] = {
38 {FLASH_OFFSET_ONENAND, "onenand", "OneNAND Flash",},
39 {FLASH_OFFSET_NAND, "nand", "NAND Flash", },
40 {FLASH_OFFSET_NOR, "nor", "NOR Flash", },
41 {FLASH_OFFSET_SATA, "sata", "SATA Disk", },
42 {FLASH_OFFSET_SD, "sd", "SD Card", },
43 {FLASH_OFFSET_SPI, "spi", "SPI Flash", },
44 {FLASH_OFFSET_QSPI, "qspi", "QSPI NOR Flash",},
45 {-1, "", "Invalid", },
49 * Supported Boot options for configuration file
50 * this is needed to determine the initial load size
52 static table_entry_t imximage_boot_loadsize[] = {
53 {FLASH_LOADSIZE_ONENAND, "onenand", "OneNAND Flash",},
54 {FLASH_LOADSIZE_NAND, "nand", "NAND Flash", },
55 {FLASH_LOADSIZE_NOR, "nor", "NOR Flash", },
56 {FLASH_LOADSIZE_SATA, "sata", "SATA Disk", },
57 {FLASH_LOADSIZE_SD, "sd", "SD Card", },
58 {FLASH_LOADSIZE_SPI, "spi", "SPI Flash", },
59 {FLASH_LOADSIZE_QSPI, "qspi", "QSPI NOR Flash",},
60 {-1, "", "Invalid", },
64 * IMXIMAGE version definition for i.MX chips
66 static table_entry_t imximage_versions[] = {
67 {IMXIMAGE_V1, "", " (i.MX25/35/51 compatible)", },
68 {IMXIMAGE_V2, "", " (i.MX53/6/7 compatible)", },
69 {-1, "", " (Invalid)", },
72 static struct imx_header imximage_header;
73 static uint32_t imximage_version;
75 * Image Vector Table Offset
76 * Initialized to a wrong not 4-bytes aligned address to
77 * check if it is was set by the cfg file.
79 static uint32_t imximage_ivt_offset = UNDEFINED;
80 static uint32_t imximage_csf_size = UNDEFINED;
81 /* Initial Load Region Size */
82 static uint32_t imximage_init_loadsize;
84 static set_dcd_val_t set_dcd_val;
85 static set_dcd_param_t set_dcd_param;
86 static set_dcd_rst_t set_dcd_rst;
87 static set_imx_hdr_t set_imx_hdr;
88 static uint32_t max_dcd_entries;
89 static uint32_t *header_size_ptr;
90 static uint32_t *csf_ptr;
92 static uint32_t get_cfg_value(char *token, char *name, int linenr)
98 value = strtoul(token, &endptr, 16);
99 if (errno || (token == endptr)) {
100 fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
101 name, linenr, token);
107 static uint32_t detect_imximage_version(struct imx_header *imx_hdr)
109 imx_header_v1_t *hdr_v1 = &imx_hdr->header.hdr_v1;
110 imx_header_v2_t *hdr_v2 = &imx_hdr->header.hdr_v2;
111 flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr;
112 flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr;
114 /* Try to detect V1 */
115 if ((fhdr_v1->app_code_barker == APP_CODE_BARKER) &&
116 (hdr_v1->dcd_table.preamble.barker == DCD_BARKER))
119 /* Try to detect V2 */
120 if ((fhdr_v2->header.tag == IVT_HEADER_TAG) &&
121 (hdr_v2->dcd_table.header.tag == DCD_HEADER_TAG))
124 return IMXIMAGE_VER_INVALID;
127 static void err_imximage_version(int version)
130 "Error: Unsupported imximage version:%d\n", version);
135 static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno,
136 int fld, uint32_t value, uint32_t off)
138 dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table;
142 /* Byte, halfword, word */
143 if ((value != 1) && (value != 2) && (value != 4)) {
144 fprintf(stderr, "Error: %s[%d] - "
145 "Invalid register size " "(%d)\n",
146 name, lineno, value);
149 dcd_v1->addr_data[off].type = value;
151 case CFG_REG_ADDRESS:
152 dcd_v1->addr_data[off].addr = value;
155 dcd_v1->addr_data[off].value = value;
163 static struct dcd_v2_cmd *gd_last_cmd;
165 static void set_dcd_param_v2(struct imx_header *imxhdr, uint32_t dcd_len,
168 dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
169 struct dcd_v2_cmd *d = gd_last_cmd;
170 struct dcd_v2_cmd *d2;
174 d = &dcd_v2->dcd_cmd;
176 len = be16_to_cpu(d->write_dcd_command.length);
178 d2 = (struct dcd_v2_cmd *)(((char *)d) + len);
182 if ((d->write_dcd_command.tag == DCD_WRITE_DATA_COMMAND_TAG) &&
183 (d->write_dcd_command.param == DCD_WRITE_DATA_PARAM))
186 d->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
187 d->write_dcd_command.length = cpu_to_be16(4);
188 d->write_dcd_command.param = DCD_WRITE_DATA_PARAM;
190 case CMD_WRITE_CLR_BIT:
191 if ((d->write_dcd_command.tag == DCD_WRITE_DATA_COMMAND_TAG) &&
192 (d->write_dcd_command.param == DCD_WRITE_CLR_BIT_PARAM))
195 d->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
196 d->write_dcd_command.length = cpu_to_be16(4);
197 d->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM;
200 * Check data command only supports one entry,
202 case CMD_CHECK_BITS_SET:
204 d->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
205 d->write_dcd_command.length = cpu_to_be16(4);
206 d->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
208 case CMD_CHECK_BITS_CLR:
210 d->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
211 d->write_dcd_command.length = cpu_to_be16(4);
212 d->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
220 static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno,
221 int fld, uint32_t value, uint32_t off)
223 struct dcd_v2_cmd *d = gd_last_cmd;
226 len = be16_to_cpu(d->write_dcd_command.length);
227 off = (len - 4) >> 3;
230 case CFG_REG_ADDRESS:
231 d->addr_data[off].addr = cpu_to_be32(value);
234 d->addr_data[off].value = cpu_to_be32(value);
236 d->write_dcd_command.length = cpu_to_be16((off << 3) + 4);
245 * Complete setting up the rest field of DCD of V1
246 * such as barker code and DCD data length.
248 static void set_dcd_rst_v1(struct imx_header *imxhdr, uint32_t dcd_len,
249 char *name, int lineno)
251 dcd_v1_t *dcd_v1 = &imxhdr->header.hdr_v1.dcd_table;
253 dcd_v1->preamble.barker = DCD_BARKER;
254 dcd_v1->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t);
258 * Complete setting up the reset field of DCD of V2
259 * such as DCD tag, version, length, etc.
261 static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
262 char *name, int lineno)
264 dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
265 struct dcd_v2_cmd *d = gd_last_cmd;
269 d = &dcd_v2->dcd_cmd;
270 len = be16_to_cpu(d->write_dcd_command.length);
272 d = (struct dcd_v2_cmd *)(((char *)d) + len);
274 len = (char *)d - (char *)&dcd_v2->header;
276 dcd_v2->header.tag = DCD_HEADER_TAG;
277 dcd_v2->header.length = cpu_to_be16(len);
278 dcd_v2->header.version = DCD_VERSION;
281 static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len,
282 uint32_t entry_point, uint32_t flash_offset)
284 imx_header_v1_t *hdr_v1 = &imxhdr->header.hdr_v1;
285 flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr;
286 dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table;
288 uint32_t header_length = (((char *)&dcd_v1->addr_data[dcd_len].addr)
291 /* Set magic number */
292 fhdr_v1->app_code_barker = APP_CODE_BARKER;
294 /* TODO: check i.MX image V1 handling, for now use 'old' style */
295 hdr_base = entry_point - 4096;
296 fhdr_v1->app_dest_ptr = hdr_base - flash_offset;
297 fhdr_v1->app_code_jump_vector = entry_point;
299 fhdr_v1->dcd_ptr_ptr = hdr_base + offsetof(flash_header_v1_t, dcd_ptr);
300 fhdr_v1->dcd_ptr = hdr_base + offsetof(imx_header_v1_t, dcd_table);
302 /* Security feature are not supported */
303 fhdr_v1->app_code_csf = 0;
304 fhdr_v1->super_root_key = 0;
305 header_size_ptr = (uint32_t *)(((char *)imxhdr) + header_length - 4);
308 static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len,
309 uint32_t entry_point, uint32_t flash_offset)
311 imx_header_v2_t *hdr_v2 = &imxhdr->header.hdr_v2;
312 flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr;
315 /* Set magic number */
316 fhdr_v2->header.tag = IVT_HEADER_TAG; /* 0xD1 */
317 fhdr_v2->header.length = cpu_to_be16(sizeof(flash_header_v2_t));
318 fhdr_v2->header.version = IVT_VERSION; /* 0x40 */
320 fhdr_v2->entry = entry_point;
321 fhdr_v2->reserved1 = fhdr_v2->reserved2 = 0;
322 hdr_base = entry_point - imximage_init_loadsize +
324 fhdr_v2->self = hdr_base;
326 fhdr_v2->dcd_ptr = hdr_base
327 + offsetof(imx_header_v2_t, dcd_table);
329 fhdr_v2->dcd_ptr = 0;
330 fhdr_v2->boot_data_ptr = hdr_base
331 + offsetof(imx_header_v2_t, boot_data);
332 hdr_v2->boot_data.start = entry_point - imximage_init_loadsize;
336 header_size_ptr = &hdr_v2->boot_data.size;
337 csf_ptr = &fhdr_v2->csf;
340 static void set_hdr_func(void)
342 switch (imximage_version) {
344 set_dcd_val = set_dcd_val_v1;
345 set_dcd_param = NULL;
346 set_dcd_rst = set_dcd_rst_v1;
347 set_imx_hdr = set_imx_hdr_v1;
348 max_dcd_entries = MAX_HW_CFG_SIZE_V1;
352 set_dcd_val = set_dcd_val_v2;
353 set_dcd_param = set_dcd_param_v2;
354 set_dcd_rst = set_dcd_rst_v2;
355 set_imx_hdr = set_imx_hdr_v2;
356 max_dcd_entries = MAX_HW_CFG_SIZE_V2;
359 err_imximage_version(imximage_version);
364 static void print_hdr_v1(struct imx_header *imx_hdr)
366 imx_header_v1_t *hdr_v1 = &imx_hdr->header.hdr_v1;
367 flash_header_v1_t *fhdr_v1 = &hdr_v1->fhdr;
368 dcd_v1_t *dcd_v1 = &hdr_v1->dcd_table;
369 uint32_t size, length, ver;
371 size = dcd_v1->preamble.length;
372 if (size > (MAX_HW_CFG_SIZE_V1 * sizeof(dcd_type_addr_data_t))) {
374 "Error: Image corrupt DCD size %d exceed maximum %d\n",
375 (uint32_t)(size / sizeof(dcd_type_addr_data_t)),
380 length = dcd_v1->preamble.length / sizeof(dcd_type_addr_data_t);
381 ver = detect_imximage_version(imx_hdr);
383 printf("Image Type: Freescale IMX Boot Image\n");
384 printf("Image Ver: %x", ver);
385 printf("%s\n", get_table_entry_name(imximage_versions, NULL, ver));
386 printf("Data Size: ");
387 genimg_print_size(dcd_v1->addr_data[length].type);
388 printf("Load Address: %08x\n", (uint32_t)fhdr_v1->app_dest_ptr);
389 printf("Entry Point: %08x\n", (uint32_t)fhdr_v1->app_code_jump_vector);
392 static void print_hdr_v2(struct imx_header *imx_hdr)
394 imx_header_v2_t *hdr_v2 = &imx_hdr->header.hdr_v2;
395 flash_header_v2_t *fhdr_v2 = &hdr_v2->fhdr;
396 dcd_v2_t *dcd_v2 = &hdr_v2->dcd_table;
397 uint32_t size, version;
399 size = be16_to_cpu(dcd_v2->header.length);
400 if (size > (MAX_HW_CFG_SIZE_V2 * sizeof(dcd_addr_data_t)) + 8) {
402 "Error: Image corrupt DCD size %d exceed maximum %d\n",
403 (uint32_t)(size / sizeof(dcd_addr_data_t)),
408 version = detect_imximage_version(imx_hdr);
410 printf("Image Type: Freescale IMX Boot Image\n");
411 printf("Image Ver: %x", version);
412 printf("%s\n", get_table_entry_name(imximage_versions, NULL, version));
413 printf("Data Size: ");
414 genimg_print_size(hdr_v2->boot_data.size);
415 printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr);
416 printf("Entry Point: %08x\n", (uint32_t)fhdr_v2->entry);
417 if (fhdr_v2->csf && (imximage_ivt_offset != UNDEFINED) &&
418 (imximage_csf_size != UNDEFINED)) {
419 printf("HAB Blocks: %08x %08x %08x\n",
420 (uint32_t)fhdr_v2->self, 0,
421 hdr_v2->boot_data.size - imximage_ivt_offset -
426 static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token,
427 char *name, int lineno, int fld, int dcd_len)
430 static int cmd_ver_first = ~0;
433 case CMD_IMAGE_VERSION:
434 imximage_version = get_cfg_value(token, name, lineno);
435 if (cmd_ver_first == 0) {
436 fprintf(stderr, "Error: %s[%d] - IMAGE_VERSION "
437 "command need be the first before other "
438 "valid command in the file\n", name, lineno);
445 imximage_ivt_offset = get_table_entry_id(imximage_boot_offset,
446 "imximage boot option", token);
447 if (imximage_ivt_offset == -1) {
448 fprintf(stderr, "Error: %s[%d] -Invalid boot device"
449 "(%s)\n", name, lineno, token);
453 imximage_init_loadsize =
454 get_table_entry_id(imximage_boot_loadsize,
455 "imximage boot option", token);
457 if (imximage_init_loadsize == -1) {
459 "Error: %s[%d] -Invalid boot device(%s)\n",
460 name, lineno, token);
465 * The SOC loads from the storage starting at address 0
466 * then ensures that the load size contains the offset
468 if (imximage_init_loadsize < imximage_ivt_offset)
469 imximage_init_loadsize = imximage_ivt_offset;
470 if (unlikely(cmd_ver_first != 1))
473 case CMD_BOOT_OFFSET:
474 imximage_ivt_offset = get_cfg_value(token, name, lineno);
475 if (unlikely(cmd_ver_first != 1))
479 case CMD_WRITE_CLR_BIT:
480 case CMD_CHECK_BITS_SET:
481 case CMD_CHECK_BITS_CLR:
482 value = get_cfg_value(token, name, lineno);
484 (*set_dcd_param)(imxhdr, dcd_len, cmd);
485 (*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len);
486 if (unlikely(cmd_ver_first != 1))
490 if (imximage_version != 2) {
492 "Error: %s[%d] - CSF only supported for VERSION 2(%s)\n",
493 name, lineno, token);
496 imximage_csf_size = get_cfg_value(token, name, lineno);
497 if (unlikely(cmd_ver_first != 1))
503 static void parse_cfg_fld(struct imx_header *imxhdr, int32_t *cmd,
504 char *token, char *name, int lineno, int fld, int *dcd_len)
510 *cmd = get_table_entry_id(imximage_cmds,
511 "imximage commands", token);
513 fprintf(stderr, "Error: %s[%d] - Invalid command"
514 "(%s)\n", name, lineno, token);
519 parse_cfg_cmd(imxhdr, *cmd, token, name, lineno, fld, *dcd_len);
521 case CFG_REG_ADDRESS:
525 case CMD_WRITE_CLR_BIT:
526 case CMD_CHECK_BITS_SET:
527 case CMD_CHECK_BITS_CLR:
529 value = get_cfg_value(token, name, lineno);
531 (*set_dcd_param)(imxhdr, *dcd_len, *cmd);
532 (*set_dcd_val)(imxhdr, name, lineno, fld, value,
535 if (fld == CFG_REG_VALUE) {
537 if (*dcd_len > max_dcd_entries) {
538 fprintf(stderr, "Error: %s[%d] -"
539 "DCD table exceeds maximum size(%d)\n",
540 name, lineno, max_dcd_entries);
553 static uint32_t parse_cfg_file(struct imx_header *imxhdr, char *name)
557 char *token, *saveptr1, *saveptr2;
564 fd = fopen(name, "r");
566 fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
571 * Very simple parsing, line starting with # are comments
574 while ((getline(&line, &len, fd)) > 0) {
577 token = strtok_r(line, "\r\n", &saveptr1);
581 /* Check inside the single line */
582 for (fld = CFG_COMMAND, cmd = CMD_INVALID,
583 line = token; ; line = NULL, fld++) {
584 token = strtok_r(line, " \t", &saveptr2);
588 /* Drop all text starting with '#' as comments */
592 parse_cfg_fld(imxhdr, &cmd, token, name,
593 lineno, fld, &dcd_len);
598 (*set_dcd_rst)(imxhdr, dcd_len, name, lineno);
601 /* Exit if there is no BOOT_FROM field specifying the flash_offset */
602 if (imximage_ivt_offset == FLASH_OFFSET_UNDEFINED) {
603 fprintf(stderr, "Error: No BOOT_FROM tag in %s\n", name);
610 static int imximage_check_image_types(uint8_t type)
612 if (type == IH_TYPE_IMXIMAGE)
618 static int imximage_verify_header(unsigned char *ptr, int image_size,
619 struct image_tool_params *params)
621 struct imx_header *imx_hdr = (struct imx_header *) ptr;
623 if (detect_imximage_version(imx_hdr) == IMXIMAGE_VER_INVALID)
624 return -FDT_ERR_BADSTRUCTURE;
629 static void imximage_print_header(const void *ptr)
631 struct imx_header *imx_hdr = (struct imx_header *) ptr;
632 uint32_t version = detect_imximage_version(imx_hdr);
636 print_hdr_v1(imx_hdr);
639 print_hdr_v2(imx_hdr);
642 err_imximage_version(version);
647 static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd,
648 struct image_tool_params *params)
650 struct imx_header *imxhdr = (struct imx_header *)ptr;
654 * In order to not change the old imx cfg file
655 * by adding VERSION command into it, here need
656 * set up function ptr group to V1 by default.
658 imximage_version = IMXIMAGE_V1;
659 /* Be able to detect if the cfg file has no BOOT_FROM tag */
660 imximage_ivt_offset = FLASH_OFFSET_UNDEFINED;
661 imximage_csf_size = 0;
664 /* Parse dcd configuration file */
665 dcd_len = parse_cfg_file(imxhdr, params->imagename);
667 if (imximage_version == IMXIMAGE_V2) {
668 if (imximage_init_loadsize < imximage_ivt_offset +
669 sizeof(imx_header_v2_t))
670 imximage_init_loadsize = imximage_ivt_offset +
671 sizeof(imx_header_v2_t);
674 /* Set the imx header */
675 (*set_imx_hdr)(imxhdr, dcd_len, params->ep, imximage_ivt_offset);
680 * MX53 only loads 512 byte multiples in case of SD boot.
681 * MX53 only loads NAND page multiples in case of NAND boot and
682 * supports up to 4096 byte large pages, thus align to 4096.
684 * The remaining fraction of a block bytes would not be loaded!
686 *header_size_ptr = ROUND((sbuf->st_size + imximage_ivt_offset), 4096);
688 if (csf_ptr && imximage_csf_size) {
689 *csf_ptr = params->ep - imximage_init_loadsize +
691 *header_size_ptr += imximage_csf_size;
695 int imximage_check_params(struct image_tool_params *params)
699 if (!strlen(params->imagename)) {
700 fprintf(stderr, "Error: %s - Configuration file not specified, "
701 "it is needed for imximage generation\n",
707 * XIP is not allowed and verify that incompatible
708 * parameters are not sent at the same time
709 * For example, if list is required a data image must not be provided
711 return (params->dflag && (params->fflag || params->lflag)) ||
712 (params->fflag && (params->dflag || params->lflag)) ||
713 (params->lflag && (params->dflag || params->fflag)) ||
714 (params->xflag) || !(strlen(params->imagename));
717 static int imximage_generate(struct image_tool_params *params,
718 struct image_type_params *tparams)
720 struct imx_header *imxhdr;
723 char *datafile = params->datafile;
726 memset(&imximage_header, 0, sizeof(imximage_header));
729 * In order to not change the old imx cfg file
730 * by adding VERSION command into it, here need
731 * set up function ptr group to V1 by default.
733 imximage_version = IMXIMAGE_V1;
734 /* Be able to detect if the cfg file has no BOOT_FROM tag */
735 imximage_ivt_offset = FLASH_OFFSET_UNDEFINED;
736 imximage_csf_size = 0;
739 /* Parse dcd configuration file */
740 parse_cfg_file(&imximage_header, params->imagename);
742 /* TODO: check i.MX image V1 handling, for now use 'old' style */
743 if (imximage_version == IMXIMAGE_V1) {
746 if (imximage_init_loadsize < imximage_ivt_offset +
747 sizeof(imx_header_v2_t))
748 imximage_init_loadsize = imximage_ivt_offset +
749 sizeof(imx_header_v2_t);
750 alloc_len = imximage_init_loadsize - imximage_ivt_offset;
753 if (alloc_len < sizeof(struct imx_header)) {
754 fprintf(stderr, "%s: header error\n",
759 imxhdr = malloc(alloc_len);
762 fprintf(stderr, "%s: malloc return failure: %s\n",
763 params->cmdname, strerror(errno));
767 memset(imxhdr, 0, alloc_len);
769 tparams->header_size = alloc_len;
770 tparams->hdr = imxhdr;
772 /* determine data image file length */
774 if (stat(datafile, &sbuf) < 0) {
775 fprintf(stderr, "%s: Can't stat %s: %s\n",
776 params->cmdname, datafile, strerror(errno));
780 pad_len = ROUND(sbuf.st_size, 4096) - sbuf.st_size;
782 /* TODO: check i.MX image V1 handling, for now use 'old' style */
783 if (imximage_version == IMXIMAGE_V1)
791 * imximage parameters
795 "Freescale i.MX Boot Image support",
798 imximage_check_params,
799 imximage_verify_header,
800 imximage_print_header,
803 imximage_check_image_types,