5 # This file describes the settings to be used by the documentation system
6 # doxygen (www.doxygen.org) for a project.
8 # All text after a double hash (##) is considered a comment and is placed in
9 # front of the TAG it is preceding.
11 # All text after a single hash (#) is considered a comment and will be ignored.
13 # TAG = value [value, ...]
14 # For lists, items can also be appended using:
15 # TAG += value [value, ...]
16 # Values that contain spaces should be placed between quotes (\" \").
18 #---------------------------------------------------------------------------
19 # Project related configuration options
20 #---------------------------------------------------------------------------
22 # This tag specifies the encoding used for all characters in the config file
23 # that follow. The default is UTF-8 which is also the encoding used for all text
24 # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
25 # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
26 # for the list of possible encodings.
27 # The default value is: UTF-8.
29 DOXYFILE_ENCODING = UTF-8
31 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
32 # double-quotes, unless you are using Doxywizard) that should identify the
33 # project for which the documentation is generated. This name is used in the
34 # title of most generated pages and in a few other places.
35 # The default value is: My Project.
37 PROJECT_NAME = "GRPC C++"
39 # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
40 # could be handy for archiving the generated documentation or if some version
41 # control system is used.
43 PROJECT_NUMBER = 1.22.0
45 # Using the PROJECT_BRIEF tag one can provide an optional one line description
46 # for a project that appears at the top of each page and should give viewer a
47 # quick idea about the purpose of the project. Keep the description short.
51 # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
52 # in the documentation. The maximum height of the logo should not exceed 55
53 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
54 # the logo to the output directory.
58 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
59 # into which the generated documentation will be written. If a relative path is
60 # entered, it will be relative to the location where doxygen was started. If
61 # left blank the current directory will be used.
63 OUTPUT_DIRECTORY = doc/ref/c++.internal
65 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
66 # directories (in 2 levels) under the output directory of each output format and
67 # will distribute the generated files over these directories. Enabling this
68 # option can be useful when feeding doxygen a huge amount of source files, where
69 # putting all generated files in the same directory would otherwise causes
70 # performance problems for the file system.
71 # The default value is: NO.
75 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
76 # characters to appear in the names of generated files. If set to NO, non-ASCII
77 # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
79 # The default value is: NO.
81 ALLOW_UNICODE_NAMES = NO
83 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
84 # documentation generated by doxygen is written. Doxygen will use this
85 # information to generate all constant output in the proper language.
86 # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
87 # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
88 # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
89 # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
90 # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
91 # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
92 # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
93 # Ukrainian and Vietnamese.
94 # The default value is: English.
96 OUTPUT_LANGUAGE = English
98 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
99 # descriptions after the members that are listed in the file and class
100 # documentation (similar to Javadoc). Set to NO to disable this.
101 # The default value is: YES.
103 BRIEF_MEMBER_DESC = YES
105 # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
106 # description of a member or function before the detailed description
108 # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
109 # brief descriptions will be completely suppressed.
110 # The default value is: YES.
114 # This tag implements a quasi-intelligent brief description abbreviator that is
115 # used to form the text in various listings. Each string in this list, if found
116 # as the leading text of the brief description, will be stripped from the text
117 # and the result, after processing the whole list, is used as the annotated
118 # text. Otherwise, the brief description is used as-is. If left blank, the
119 # following values are used ($name is automatically replaced with the name of
120 # the entity):The $name class, The $name widget, The $name file, is, provides,
121 # specifies, contains, represents, a, an and the.
125 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
126 # doxygen will generate a detailed section even if there is only a brief
128 # The default value is: NO.
130 ALWAYS_DETAILED_SEC = NO
132 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
133 # inherited members of a class in the documentation of that class as if those
134 # members were ordinary class members. Constructors, destructors and assignment
135 # operators of the base classes will not be shown.
136 # The default value is: NO.
138 INLINE_INHERITED_MEMB = NO
140 # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
141 # before files name in the file list and in the header files. If set to NO the
142 # shortest path that makes the file name unique will be used
143 # The default value is: YES.
145 FULL_PATH_NAMES = YES
147 # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
148 # Stripping is only done if one of the specified strings matches the left-hand
149 # part of the path. The tag can be used to show relative paths in the file list.
150 # If left blank the directory from which doxygen is run is used as the path to
153 # Note that you can specify absolute paths here, but also relative paths, which
154 # will be relative from the directory where doxygen is started.
155 # This tag requires that the tag FULL_PATH_NAMES is set to YES.
159 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
160 # path mentioned in the documentation of a class, which tells the reader which
161 # header file to include in order to use a class. If left blank only the name of
162 # the header file containing the class definition is used. Otherwise one should
163 # specify the list of include paths that are normally passed to the compiler
166 STRIP_FROM_INC_PATH =
168 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
169 # less readable) file names. This can be useful is your file systems doesn't
170 # support long names like on DOS, Mac, or CD-ROM.
171 # The default value is: NO.
175 # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
176 # first line (until the first dot) of a Javadoc-style comment as the brief
177 # description. If set to NO, the Javadoc-style will behave just like regular Qt-
178 # style comments (thus requiring an explicit @brief command for a brief
180 # The default value is: NO.
182 JAVADOC_AUTOBRIEF = YES
184 # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
185 # line (until the first dot) of a Qt-style comment as the brief description. If
186 # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
187 # requiring an explicit \brief command for a brief description.)
188 # The default value is: NO.
192 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
193 # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
194 # a brief description. This used to be the default behavior. The new default is
195 # to treat a multi-line C++ comment block as a detailed description. Set this
196 # tag to YES if you prefer the old behavior instead.
198 # Note that setting this tag to YES also means that rational rose comments are
199 # not recognized any more.
200 # The default value is: NO.
202 MULTILINE_CPP_IS_BRIEF = NO
204 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
205 # documentation from any documented member that it re-implements.
206 # The default value is: YES.
210 # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
211 # page for each member. If set to NO, the documentation of a member will be part
212 # of the file/class/namespace that contains it.
213 # The default value is: NO.
215 SEPARATE_MEMBER_PAGES = NO
217 # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
218 # uses this value to replace tabs by spaces in code fragments.
219 # Minimum value: 1, maximum value: 16, default value: 4.
223 # This tag can be used to specify a number of aliases that act as commands in
224 # the documentation. An alias has the form:
227 # "sideeffect=@par Side Effects:\n"
228 # will allow you to put the command \sideeffect (or @sideeffect) in the
229 # documentation, which will result in a user-defined paragraph with heading
230 # "Side Effects:". You can put \n's in the value part of an alias to insert
235 # This tag can be used to specify a number of word-keyword mappings (TCL only).
236 # A mapping has the form "name=value". For example adding "class=itcl::class"
237 # will allow you to use the command class in the itcl::class meaning.
241 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
242 # only. Doxygen will then generate output that is more tailored for C. For
243 # instance, some of the names that are used will be different. The list of all
244 # members will be omitted, etc.
245 # The default value is: NO.
247 OPTIMIZE_OUTPUT_FOR_C = YES
249 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
250 # Python sources only. Doxygen will then generate output that is more tailored
251 # for that language. For instance, namespaces will be presented as packages,
252 # qualified scopes will look different, etc.
253 # The default value is: NO.
255 OPTIMIZE_OUTPUT_JAVA = NO
257 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
258 # sources. Doxygen will then generate output that is tailored for Fortran.
259 # The default value is: NO.
261 OPTIMIZE_FOR_FORTRAN = NO
263 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
264 # sources. Doxygen will then generate output that is tailored for VHDL.
265 # The default value is: NO.
267 OPTIMIZE_OUTPUT_VHDL = NO
269 # Doxygen selects the parser to use depending on the extension of the files it
270 # parses. With this tag you can assign which parser to use for a given
271 # extension. Doxygen has a built-in mapping, but you can override or extend it
272 # using this tag. The format is ext=language, where ext is a file extension, and
273 # language is one of the parsers supported by doxygen: IDL, Java, Javascript,
274 # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
275 # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
276 # Fortran. In the later case the parser tries to guess whether the code is fixed
277 # or free formatted code, this is the default for Fortran type files), VHDL. For
278 # instance to make doxygen treat .inc files as Fortran files (default is PHP),
279 # and .f files as C (default is Fortran), use: inc=Fortran f=C.
281 # Note: For files without extension you can use no_extension as a placeholder.
283 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
284 # the files are not read by doxygen.
288 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
289 # according to the Markdown format, which allows for more readable
290 # documentation. See http://daringfireball.net/projects/markdown/ for details.
291 # The output of markdown processing is further processed by doxygen, so you can
292 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
293 # case of backward compatibilities issues.
294 # The default value is: YES.
296 MARKDOWN_SUPPORT = YES
298 # When enabled doxygen tries to link words that correspond to documented
299 # classes, or namespaces to their corresponding documentation. Such a link can
300 # be prevented in individual cases by putting a % sign in front of the word or
301 # globally by setting AUTOLINK_SUPPORT to NO.
302 # The default value is: YES.
304 AUTOLINK_SUPPORT = YES
306 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
307 # to include (a tag file for) the STL sources as input, then you should set this
308 # tag to YES in order to let doxygen match functions declarations and
309 # definitions whose arguments contain STL classes (e.g. func(std::string);
310 # versus func(std::string) {}). This also make the inheritance and collaboration
311 # diagrams that involve STL classes more complete and accurate.
312 # The default value is: NO.
314 BUILTIN_STL_SUPPORT = NO
316 # If you use Microsoft's C++/CLI language, you should set this option to YES to
317 # enable parsing support.
318 # The default value is: NO.
322 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
323 # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
324 # will parse them like normal C++ but will assume all classes use public instead
325 # of private inheritance when no explicit protection keyword is present.
326 # The default value is: NO.
330 # For Microsoft's IDL there are propget and propput attributes to indicate
331 # getter and setter methods for a property. Setting this option to YES will make
332 # doxygen to replace the get and set methods by a property in the documentation.
333 # This will only work if the methods are indeed getting or setting a simple
334 # type. If this is not the case, or you want to show the methods anyway, you
335 # should set this option to NO.
336 # The default value is: YES.
338 IDL_PROPERTY_SUPPORT = YES
340 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
341 # tag is set to YES then doxygen will reuse the documentation of the first
342 # member in the group (if any) for the other members of the group. By default
343 # all members of a group must be documented explicitly.
344 # The default value is: NO.
346 DISTRIBUTE_GROUP_DOC = NO
348 # Set the SUBGROUPING tag to YES to allow class member groups of the same type
349 # (for instance a group of public functions) to be put as a subgroup of that
350 # type (e.g. under the Public Functions section). Set it to NO to prevent
351 # subgrouping. Alternatively, this can be done per class using the
352 # \nosubgrouping command.
353 # The default value is: YES.
357 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
358 # are shown inside the group in which they are included (e.g. using \ingroup)
359 # instead of on a separate page (for HTML and Man pages) or section (for LaTeX
362 # Note that this feature does not work in combination with
363 # SEPARATE_MEMBER_PAGES.
364 # The default value is: NO.
366 INLINE_GROUPED_CLASSES = NO
368 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
369 # with only public data fields or simple typedef fields will be shown inline in
370 # the documentation of the scope in which they are defined (i.e. file,
371 # namespace, or group documentation), provided this scope is documented. If set
372 # to NO, structs, classes, and unions are shown on a separate page (for HTML and
373 # Man pages) or section (for LaTeX and RTF).
374 # The default value is: NO.
376 INLINE_SIMPLE_STRUCTS = NO
378 # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
379 # enum is documented as struct, union, or enum with the name of the typedef. So
380 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
381 # with name TypeT. When disabled the typedef will appear as a member of a file,
382 # namespace, or class. And the struct will be named TypeS. This can typically be
383 # useful for C code in case the coding convention dictates that all compound
384 # types are typedef'ed and only the typedef is referenced, never the tag name.
385 # The default value is: NO.
387 TYPEDEF_HIDES_STRUCT = NO
389 # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
390 # cache is used to resolve symbols given their name and scope. Since this can be
391 # an expensive process and often the same symbol appears multiple times in the
392 # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
393 # doxygen will become slower. If the cache is too large, memory is wasted. The
394 # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
395 # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
396 # symbols. At the end of a run doxygen will report the cache usage and suggest
397 # the optimal cache size from a speed point of view.
398 # Minimum value: 0, maximum value: 9, default value: 0.
400 LOOKUP_CACHE_SIZE = 0
402 #---------------------------------------------------------------------------
403 # Build related configuration options
404 #---------------------------------------------------------------------------
406 # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
407 # documentation are documented, even if no documentation was available. Private
408 # class members and static file members will be hidden unless the
409 # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
410 # Note: This will also disable the warnings about undocumented members that are
411 # normally produced when WARNINGS is set to YES.
412 # The default value is: NO.
416 # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
417 # be included in the documentation.
418 # The default value is: NO.
422 # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
423 # scope will be included in the documentation.
424 # The default value is: NO.
428 # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
429 # included in the documentation.
430 # The default value is: NO.
434 # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
435 # locally in source files will be included in the documentation. If set to NO,
436 # only classes defined in header files are included. Does not have any effect
438 # The default value is: YES.
440 EXTRACT_LOCAL_CLASSES = YES
442 # This flag is only useful for Objective-C code. If set to YES, local methods,
443 # which are defined in the implementation section but not in the interface are
444 # included in the documentation. If set to NO, only methods in the interface are
446 # The default value is: NO.
448 EXTRACT_LOCAL_METHODS = NO
450 # If this flag is set to YES, the members of anonymous namespaces will be
451 # extracted and appear in the documentation as a namespace called
452 # 'anonymous_namespace{file}', where file will be replaced with the base name of
453 # the file that contains the anonymous namespace. By default anonymous namespace
455 # The default value is: NO.
457 EXTRACT_ANON_NSPACES = NO
459 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
460 # undocumented members inside documented classes or files. If set to NO these
461 # members will be included in the various overviews, but no documentation
462 # section is generated. This option has no effect if EXTRACT_ALL is enabled.
463 # The default value is: NO.
465 HIDE_UNDOC_MEMBERS = NO
467 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
468 # undocumented classes that are normally visible in the class hierarchy. If set
469 # to NO, these classes will be included in the various overviews. This option
470 # has no effect if EXTRACT_ALL is enabled.
471 # The default value is: NO.
473 HIDE_UNDOC_CLASSES = NO
475 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
476 # (class|struct|union) declarations. If set to NO, these declarations will be
477 # included in the documentation.
478 # The default value is: NO.
480 HIDE_FRIEND_COMPOUNDS = NO
482 # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
483 # documentation blocks found inside the body of a function. If set to NO, these
484 # blocks will be appended to the function's detailed documentation block.
485 # The default value is: NO.
487 HIDE_IN_BODY_DOCS = NO
489 # The INTERNAL_DOCS tag determines if documentation that is typed after a
490 # \internal command is included. If the tag is set to NO then the documentation
491 # will be excluded. Set it to YES to include the internal documentation.
492 # The default value is: NO.
496 # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
497 # names in lower-case letters. If set to YES, upper-case letters are also
498 # allowed. This is useful if you have classes or files whose names only differ
499 # in case and if your file system supports case sensitive file names. Windows
500 # and Mac users are advised to set this option to NO.
501 # The default value is: system dependent.
503 CASE_SENSE_NAMES = NO
505 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
506 # their full class and namespace scopes in the documentation. If set to YES, the
507 # scope will be hidden.
508 # The default value is: NO.
510 HIDE_SCOPE_NAMES = NO
512 # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
513 # append additional text to a page's title, such as Class Reference. If set to
514 # YES the compound reference will be hidden.
515 # The default value is: NO.
517 HIDE_COMPOUND_REFERENCE= NO
519 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
520 # the files that are included by a file in the documentation of that file.
521 # The default value is: YES.
523 SHOW_INCLUDE_FILES = YES
525 # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
526 # grouped member an include statement to the documentation, telling the reader
527 # which file to include in order to use the member.
528 # The default value is: NO.
530 SHOW_GROUPED_MEMB_INC = NO
532 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
533 # files with double quotes in the documentation rather than with sharp brackets.
534 # The default value is: NO.
536 FORCE_LOCAL_INCLUDES = NO
538 # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
539 # documentation for inline members.
540 # The default value is: YES.
544 # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
545 # (detailed) documentation of file and class members alphabetically by member
546 # name. If set to NO, the members will appear in declaration order.
547 # The default value is: YES.
549 SORT_MEMBER_DOCS = YES
551 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
552 # descriptions of file, namespace and class members alphabetically by member
553 # name. If set to NO, the members will appear in declaration order. Note that
554 # this will also influence the order of the classes in the class list.
555 # The default value is: NO.
559 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
560 # (brief and detailed) documentation of class members so that constructors and
561 # destructors are listed first. If set to NO the constructors will appear in the
562 # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
563 # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
564 # member documentation.
565 # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
566 # detailed member documentation.
567 # The default value is: NO.
569 SORT_MEMBERS_CTORS_1ST = NO
571 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
572 # of group names into alphabetical order. If set to NO the group names will
573 # appear in their defined order.
574 # The default value is: NO.
576 SORT_GROUP_NAMES = NO
578 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
579 # fully-qualified names, including namespaces. If set to NO, the class list will
580 # be sorted only by class name, not including the namespace part.
581 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
582 # Note: This option applies only to the class list, not to the alphabetical
584 # The default value is: NO.
586 SORT_BY_SCOPE_NAME = NO
588 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
589 # type resolution of all parameters of a function it will reject a match between
590 # the prototype and the implementation of a member function even if there is
591 # only one candidate or it is obvious which candidate to choose by doing a
592 # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
593 # accept a match between prototype and implementation in such cases.
594 # The default value is: NO.
596 STRICT_PROTO_MATCHING = NO
598 # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
599 # list. This list is created by putting \todo commands in the documentation.
600 # The default value is: YES.
602 GENERATE_TODOLIST = YES
604 # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
605 # list. This list is created by putting \test commands in the documentation.
606 # The default value is: YES.
608 GENERATE_TESTLIST = YES
610 # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
611 # list. This list is created by putting \bug commands in the documentation.
612 # The default value is: YES.
614 GENERATE_BUGLIST = YES
616 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
617 # the deprecated list. This list is created by putting \deprecated commands in
619 # The default value is: YES.
621 GENERATE_DEPRECATEDLIST= YES
623 # The ENABLED_SECTIONS tag can be used to enable conditional documentation
624 # sections, marked by \if <section_label> ... \endif and \cond <section_label>
625 # ... \endcond blocks.
629 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
630 # initial value of a variable or macro / define can have for it to appear in the
631 # documentation. If the initializer consists of more lines than specified here
632 # it will be hidden. Use a value of 0 to hide initializers completely. The
633 # appearance of the value of individual variables and macros / defines can be
634 # controlled using \showinitializer or \hideinitializer command in the
635 # documentation regardless of this setting.
636 # Minimum value: 0, maximum value: 10000, default value: 30.
638 MAX_INITIALIZER_LINES = 30
640 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
641 # the bottom of the documentation of classes and structs. If set to YES, the
642 # list will mention the files that were used to generate the documentation.
643 # The default value is: YES.
645 SHOW_USED_FILES = YES
647 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
648 # will remove the Files entry from the Quick Index and from the Folder Tree View
650 # The default value is: YES.
654 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
655 # page. This will remove the Namespaces entry from the Quick Index and from the
656 # Folder Tree View (if specified).
657 # The default value is: YES.
659 SHOW_NAMESPACES = YES
661 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
662 # doxygen should invoke to get the current version for each file (typically from
663 # the version control system). Doxygen will invoke the program by executing (via
664 # popen()) the command command input-file, where command is the value of the
665 # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
666 # by doxygen. Whatever the program writes to standard output is used as the file
667 # version. For an example see the documentation.
669 FILE_VERSION_FILTER =
671 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
672 # by doxygen. The layout file controls the global structure of the generated
673 # output files in an output format independent way. To create the layout file
674 # that represents doxygen's defaults, run doxygen with the -l option. You can
675 # optionally specify a file name after the option, if omitted DoxygenLayout.xml
676 # will be used as the name of the layout file.
678 # Note that if you run doxygen from a directory containing a file called
679 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
684 # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
685 # the reference definitions. This must be a list of .bib files. The .bib
686 # extension is automatically appended if omitted. This requires the bibtex tool
687 # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
688 # For LaTeX the style of the bibliography can be controlled using
689 # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
690 # search path. See also \cite for info how to create references.
694 #---------------------------------------------------------------------------
695 # Configuration options related to warning and progress messages
696 #---------------------------------------------------------------------------
698 # The QUIET tag can be used to turn on/off the messages that are generated to
699 # standard output by doxygen. If QUIET is set to YES this implies that the
701 # The default value is: NO.
705 # The WARNINGS tag can be used to turn on/off the warning messages that are
706 # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
707 # this implies that the warnings are on.
709 # Tip: Turn warnings on while writing the documentation.
710 # The default value is: YES.
714 # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
715 # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
716 # will automatically be disabled.
717 # The default value is: YES.
719 WARN_IF_UNDOCUMENTED = YES
721 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
722 # potential errors in the documentation, such as not documenting some parameters
723 # in a documented function, or documenting parameters that don't exist or using
724 # markup commands wrongly.
725 # The default value is: YES.
727 WARN_IF_DOC_ERROR = YES
729 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
730 # are documented, but have no documentation for their parameters or return
731 # value. If set to NO, doxygen will only warn about wrong or incomplete
732 # parameter documentation, but not about the absence of documentation.
733 # The default value is: NO.
735 WARN_NO_PARAMDOC = NO
737 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
738 # can produce. The string should contain the $file, $line, and $text tags, which
739 # will be replaced by the file and line number from which the warning originated
740 # and the warning text. Optionally the format may contain $version, which will
741 # be replaced by the version of the file (if it could be obtained via
742 # FILE_VERSION_FILTER)
743 # The default value is: $file:$line: $text.
745 WARN_FORMAT = "$file:$line: $text"
747 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
748 # messages should be written. If left blank the output is written to standard
753 #---------------------------------------------------------------------------
754 # Configuration options related to the input files
755 #---------------------------------------------------------------------------
757 # The INPUT tag is used to specify the files and/or directories that contain
758 # documented source files. You may enter file names like myfile.cpp or
759 # directories like /usr/src/myproject. Separate the files or directories with
761 # Note: If this tag is empty the current directory is searched.
763 INPUT = doc/PROTOCOL-HTTP2.md \
764 doc/PROTOCOL-WEB.md \
765 doc/binary-logging.md \
766 doc/c-style-guide.md \
767 doc/command_line_tool.md \
769 doc/compression_cookbook.md \
770 doc/connection-backoff-interop-test-description.md \
771 doc/connection-backoff.md \
772 doc/connectivity-semantics-and-api.md \
773 doc/cpp-style-guide.md \
774 doc/cpp/pending_api_cleanups.md \
775 doc/cpp/perf_notes.md \
776 doc/environment_variables.md \
778 doc/fork_support.md \
779 doc/g_stands_for.md \
780 doc/grpc_release_schedule.md \
781 doc/health-checking.md \
782 doc/http-grpc-status-mapping.md \
783 doc/http2-interop-test-descriptions.md \
784 doc/internationalization.md \
785 doc/interop-test-descriptions.md \
787 doc/load-balancing.md \
789 doc/server-reflection.md \
790 doc/server_reflection_tutorial.md \
791 doc/server_side_auth.md \
792 doc/service_config.md \
793 doc/ssl-performance.md \
794 doc/status_ordering.md \
796 doc/unit_testing.md \
797 doc/wait-for-ready.md \
799 include/grpc++/alarm.h \
800 include/grpc++/channel.h \
801 include/grpc++/client_context.h \
802 include/grpc++/completion_queue.h \
803 include/grpc++/create_channel.h \
804 include/grpc++/create_channel_posix.h \
805 include/grpc++/ext/health_check_service_server_builder_option.h \
806 include/grpc++/generic/async_generic_service.h \
807 include/grpc++/generic/generic_stub.h \
808 include/grpc++/grpc++.h \
809 include/grpc++/health_check_service_interface.h \
810 include/grpc++/impl/call.h \
811 include/grpc++/impl/channel_argument_option.h \
812 include/grpc++/impl/client_unary_call.h \
813 include/grpc++/impl/codegen/async_stream.h \
814 include/grpc++/impl/codegen/async_unary_call.h \
815 include/grpc++/impl/codegen/byte_buffer.h \
816 include/grpc++/impl/codegen/call.h \
817 include/grpc++/impl/codegen/call_hook.h \
818 include/grpc++/impl/codegen/channel_interface.h \
819 include/grpc++/impl/codegen/client_context.h \
820 include/grpc++/impl/codegen/client_unary_call.h \
821 include/grpc++/impl/codegen/completion_queue.h \
822 include/grpc++/impl/codegen/completion_queue_tag.h \
823 include/grpc++/impl/codegen/config.h \
824 include/grpc++/impl/codegen/config_protobuf.h \
825 include/grpc++/impl/codegen/core_codegen.h \
826 include/grpc++/impl/codegen/core_codegen.h \
827 include/grpc++/impl/codegen/core_codegen_interface.h \
828 include/grpc++/impl/codegen/create_auth_context.h \
829 include/grpc++/impl/codegen/grpc_library.h \
830 include/grpc++/impl/codegen/metadata_map.h \
831 include/grpc++/impl/codegen/method_handler_impl.h \
832 include/grpc++/impl/codegen/proto_utils.h \
833 include/grpc++/impl/codegen/rpc_method.h \
834 include/grpc++/impl/codegen/rpc_service_method.h \
835 include/grpc++/impl/codegen/security/auth_context.h \
836 include/grpc++/impl/codegen/serialization_traits.h \
837 include/grpc++/impl/codegen/server_context.h \
838 include/grpc++/impl/codegen/server_interface.h \
839 include/grpc++/impl/codegen/service_type.h \
840 include/grpc++/impl/codegen/slice.h \
841 include/grpc++/impl/codegen/status.h \
842 include/grpc++/impl/codegen/status_code_enum.h \
843 include/grpc++/impl/codegen/string_ref.h \
844 include/grpc++/impl/codegen/stub_options.h \
845 include/grpc++/impl/codegen/sync_stream.h \
846 include/grpc++/impl/codegen/time.h \
847 include/grpc++/impl/grpc_library.h \
848 include/grpc++/impl/method_handler_impl.h \
849 include/grpc++/impl/rpc_method.h \
850 include/grpc++/impl/rpc_service_method.h \
851 include/grpc++/impl/serialization_traits.h \
852 include/grpc++/impl/server_builder_option.h \
853 include/grpc++/impl/server_builder_plugin.h \
854 include/grpc++/impl/server_initializer.h \
855 include/grpc++/impl/service_type.h \
856 include/grpc++/resource_quota.h \
857 include/grpc++/security/auth_context.h \
858 include/grpc++/security/auth_metadata_processor.h \
859 include/grpc++/security/credentials.h \
860 include/grpc++/security/server_credentials.h \
861 include/grpc++/server.h \
862 include/grpc++/server_builder.h \
863 include/grpc++/server_context.h \
864 include/grpc++/server_posix.h \
865 include/grpc++/support/async_stream.h \
866 include/grpc++/support/async_unary_call.h \
867 include/grpc++/support/byte_buffer.h \
868 include/grpc++/support/channel_arguments.h \
869 include/grpc++/support/config.h \
870 include/grpc++/support/slice.h \
871 include/grpc++/support/status.h \
872 include/grpc++/support/status_code_enum.h \
873 include/grpc++/support/string_ref.h \
874 include/grpc++/support/stub_options.h \
875 include/grpc++/support/sync_stream.h \
876 include/grpc++/support/time.h \
877 include/grpc/byte_buffer.h \
878 include/grpc/byte_buffer_reader.h \
879 include/grpc/compression.h \
880 include/grpc/fork.h \
881 include/grpc/grpc.h \
882 include/grpc/grpc_posix.h \
883 include/grpc/grpc_security_constants.h \
884 include/grpc/impl/codegen/atm.h \
885 include/grpc/impl/codegen/atm_gcc_atomic.h \
886 include/grpc/impl/codegen/atm_gcc_sync.h \
887 include/grpc/impl/codegen/atm_windows.h \
888 include/grpc/impl/codegen/byte_buffer.h \
889 include/grpc/impl/codegen/byte_buffer_reader.h \
890 include/grpc/impl/codegen/compression_types.h \
891 include/grpc/impl/codegen/connectivity_state.h \
892 include/grpc/impl/codegen/fork.h \
893 include/grpc/impl/codegen/gpr_slice.h \
894 include/grpc/impl/codegen/gpr_types.h \
895 include/grpc/impl/codegen/grpc_types.h \
896 include/grpc/impl/codegen/log.h \
897 include/grpc/impl/codegen/port_platform.h \
898 include/grpc/impl/codegen/propagation_bits.h \
899 include/grpc/impl/codegen/slice.h \
900 include/grpc/impl/codegen/status.h \
901 include/grpc/impl/codegen/sync.h \
902 include/grpc/impl/codegen/sync_custom.h \
903 include/grpc/impl/codegen/sync_generic.h \
904 include/grpc/impl/codegen/sync_posix.h \
905 include/grpc/impl/codegen/sync_windows.h \
906 include/grpc/load_reporting.h \
907 include/grpc/slice.h \
908 include/grpc/slice_buffer.h \
909 include/grpc/status.h \
910 include/grpc/support/alloc.h \
911 include/grpc/support/atm.h \
912 include/grpc/support/atm_gcc_atomic.h \
913 include/grpc/support/atm_gcc_sync.h \
914 include/grpc/support/atm_windows.h \
915 include/grpc/support/cpu.h \
916 include/grpc/support/log.h \
917 include/grpc/support/log_windows.h \
918 include/grpc/support/port_platform.h \
919 include/grpc/support/string_util.h \
920 include/grpc/support/sync.h \
921 include/grpc/support/sync_custom.h \
922 include/grpc/support/sync_generic.h \
923 include/grpc/support/sync_posix.h \
924 include/grpc/support/sync_windows.h \
925 include/grpc/support/thd_id.h \
926 include/grpc/support/time.h \
927 include/grpc/support/workaround_list.h \
928 include/grpcpp/alarm.h \
929 include/grpcpp/alarm_impl.h \
930 include/grpcpp/channel.h \
931 include/grpcpp/channel_impl.h \
932 include/grpcpp/client_context.h \
933 include/grpcpp/completion_queue.h \
934 include/grpcpp/create_channel.h \
935 include/grpcpp/create_channel_impl.h \
936 include/grpcpp/create_channel_posix.h \
937 include/grpcpp/create_channel_posix_impl.h \
938 include/grpcpp/ext/health_check_service_server_builder_option.h \
939 include/grpcpp/generic/async_generic_service.h \
940 include/grpcpp/generic/generic_stub.h \
941 include/grpcpp/generic/generic_stub_impl.h \
942 include/grpcpp/grpcpp.h \
943 include/grpcpp/health_check_service_interface.h \
944 include/grpcpp/health_check_service_interface_impl.h \
945 include/grpcpp/impl/call.h \
946 include/grpcpp/impl/channel_argument_option.h \
947 include/grpcpp/impl/client_unary_call.h \
948 include/grpcpp/impl/codegen/async_generic_service.h \
949 include/grpcpp/impl/codegen/async_stream.h \
950 include/grpcpp/impl/codegen/async_unary_call.h \
951 include/grpcpp/impl/codegen/byte_buffer.h \
952 include/grpcpp/impl/codegen/call.h \
953 include/grpcpp/impl/codegen/call_hook.h \
954 include/grpcpp/impl/codegen/call_op_set.h \
955 include/grpcpp/impl/codegen/call_op_set_interface.h \
956 include/grpcpp/impl/codegen/callback_common.h \
957 include/grpcpp/impl/codegen/channel_interface.h \
958 include/grpcpp/impl/codegen/client_callback.h \
959 include/grpcpp/impl/codegen/client_context.h \
960 include/grpcpp/impl/codegen/client_context_impl.h \
961 include/grpcpp/impl/codegen/client_interceptor.h \
962 include/grpcpp/impl/codegen/client_unary_call.h \
963 include/grpcpp/impl/codegen/completion_queue.h \
964 include/grpcpp/impl/codegen/completion_queue_impl.h \
965 include/grpcpp/impl/codegen/completion_queue_tag.h \
966 include/grpcpp/impl/codegen/config.h \
967 include/grpcpp/impl/codegen/config_protobuf.h \
968 include/grpcpp/impl/codegen/core_codegen.h \
969 include/grpcpp/impl/codegen/core_codegen.h \
970 include/grpcpp/impl/codegen/core_codegen_interface.h \
971 include/grpcpp/impl/codegen/create_auth_context.h \
972 include/grpcpp/impl/codegen/grpc_library.h \
973 include/grpcpp/impl/codegen/intercepted_channel.h \
974 include/grpcpp/impl/codegen/interceptor.h \
975 include/grpcpp/impl/codegen/interceptor_common.h \
976 include/grpcpp/impl/codegen/message_allocator.h \
977 include/grpcpp/impl/codegen/metadata_map.h \
978 include/grpcpp/impl/codegen/method_handler_impl.h \
979 include/grpcpp/impl/codegen/proto_buffer_reader.h \
980 include/grpcpp/impl/codegen/proto_buffer_writer.h \
981 include/grpcpp/impl/codegen/proto_utils.h \
982 include/grpcpp/impl/codegen/rpc_method.h \
983 include/grpcpp/impl/codegen/rpc_service_method.h \
984 include/grpcpp/impl/codegen/security/auth_context.h \
985 include/grpcpp/impl/codegen/serialization_traits.h \
986 include/grpcpp/impl/codegen/server_callback.h \
987 include/grpcpp/impl/codegen/server_context.h \
988 include/grpcpp/impl/codegen/server_context_impl.h \
989 include/grpcpp/impl/codegen/server_interceptor.h \
990 include/grpcpp/impl/codegen/server_interface.h \
991 include/grpcpp/impl/codegen/service_type.h \
992 include/grpcpp/impl/codegen/slice.h \
993 include/grpcpp/impl/codegen/status.h \
994 include/grpcpp/impl/codegen/status_code_enum.h \
995 include/grpcpp/impl/codegen/string_ref.h \
996 include/grpcpp/impl/codegen/stub_options.h \
997 include/grpcpp/impl/codegen/sync.h \
998 include/grpcpp/impl/codegen/sync_stream.h \
999 include/grpcpp/impl/codegen/time.h \
1000 include/grpcpp/impl/grpc_library.h \
1001 include/grpcpp/impl/method_handler_impl.h \
1002 include/grpcpp/impl/rpc_method.h \
1003 include/grpcpp/impl/rpc_service_method.h \
1004 include/grpcpp/impl/serialization_traits.h \
1005 include/grpcpp/impl/server_builder_option.h \
1006 include/grpcpp/impl/server_builder_option_impl.h \
1007 include/grpcpp/impl/server_builder_plugin.h \
1008 include/grpcpp/impl/server_initializer.h \
1009 include/grpcpp/impl/server_initializer_impl.h \
1010 include/grpcpp/impl/service_type.h \
1011 include/grpcpp/resource_quota.h \
1012 include/grpcpp/resource_quota_impl.h \
1013 include/grpcpp/security/auth_context.h \
1014 include/grpcpp/security/auth_metadata_processor.h \
1015 include/grpcpp/security/auth_metadata_processor_impl.h \
1016 include/grpcpp/security/credentials.h \
1017 include/grpcpp/security/credentials_impl.h \
1018 include/grpcpp/security/server_credentials.h \
1019 include/grpcpp/security/server_credentials_impl.h \
1020 include/grpcpp/server.h \
1021 include/grpcpp/server_builder.h \
1022 include/grpcpp/server_builder_impl.h \
1023 include/grpcpp/server_context.h \
1024 include/grpcpp/server_impl.h \
1025 include/grpcpp/server_posix.h \
1026 include/grpcpp/server_posix_impl.h \
1027 include/grpcpp/support/async_stream.h \
1028 include/grpcpp/support/async_unary_call.h \
1029 include/grpcpp/support/byte_buffer.h \
1030 include/grpcpp/support/channel_arguments.h \
1031 include/grpcpp/support/channel_arguments_impl.h \
1032 include/grpcpp/support/client_callback.h \
1033 include/grpcpp/support/client_interceptor.h \
1034 include/grpcpp/support/config.h \
1035 include/grpcpp/support/interceptor.h \
1036 include/grpcpp/support/message_allocator.h \
1037 include/grpcpp/support/proto_buffer_reader.h \
1038 include/grpcpp/support/proto_buffer_writer.h \
1039 include/grpcpp/support/server_callback.h \
1040 include/grpcpp/support/server_interceptor.h \
1041 include/grpcpp/support/slice.h \
1042 include/grpcpp/support/status.h \
1043 include/grpcpp/support/status_code_enum.h \
1044 include/grpcpp/support/string_ref.h \
1045 include/grpcpp/support/stub_options.h \
1046 include/grpcpp/support/sync_stream.h \
1047 include/grpcpp/support/time.h \
1048 include/grpcpp/support/validate_service_config.h \
1049 src/core/ext/filters/client_channel/health/health.pb.c \
1050 src/core/ext/filters/client_channel/health/health.pb.h \
1051 src/core/ext/transport/inproc/inproc_transport.h \
1052 src/core/lib/avl/avl.h \
1053 src/core/lib/backoff/backoff.h \
1054 src/core/lib/channel/channel_args.h \
1055 src/core/lib/channel/channel_stack.h \
1056 src/core/lib/channel/channel_stack_builder.h \
1057 src/core/lib/channel/channel_trace.h \
1058 src/core/lib/channel/channelz.h \
1059 src/core/lib/channel/channelz_registry.h \
1060 src/core/lib/channel/connected_channel.h \
1061 src/core/lib/channel/context.h \
1062 src/core/lib/channel/handshaker.h \
1063 src/core/lib/channel/handshaker_factory.h \
1064 src/core/lib/channel/handshaker_registry.h \
1065 src/core/lib/channel/status_util.h \
1066 src/core/lib/compression/algorithm_metadata.h \
1067 src/core/lib/compression/compression_args.h \
1068 src/core/lib/compression/compression_internal.h \
1069 src/core/lib/compression/message_compress.h \
1070 src/core/lib/compression/stream_compression.h \
1071 src/core/lib/compression/stream_compression_gzip.h \
1072 src/core/lib/compression/stream_compression_identity.h \
1073 src/core/lib/debug/stats.h \
1074 src/core/lib/debug/stats_data.h \
1075 src/core/lib/debug/trace.h \
1076 src/core/lib/gpr/alloc.h \
1077 src/core/lib/gpr/arena.h \
1078 src/core/lib/gpr/env.h \
1079 src/core/lib/gpr/host_port.h \
1080 src/core/lib/gpr/mpscq.h \
1081 src/core/lib/gpr/murmur_hash.h \
1082 src/core/lib/gpr/spinlock.h \
1083 src/core/lib/gpr/string.h \
1084 src/core/lib/gpr/string_windows.h \
1085 src/core/lib/gpr/time_precise.h \
1086 src/core/lib/gpr/tls.h \
1087 src/core/lib/gpr/tls_gcc.h \
1088 src/core/lib/gpr/tls_msvc.h \
1089 src/core/lib/gpr/tls_pthread.h \
1090 src/core/lib/gpr/tmpfile.h \
1091 src/core/lib/gpr/useful.h \
1092 src/core/lib/gprpp/abstract.h \
1093 src/core/lib/gprpp/arena.h \
1094 src/core/lib/gprpp/atomic.h \
1095 src/core/lib/gprpp/debug_location.h \
1096 src/core/lib/gprpp/fork.h \
1097 src/core/lib/gprpp/global_config.h \
1098 src/core/lib/gprpp/global_config_custom.h \
1099 src/core/lib/gprpp/global_config_env.h \
1100 src/core/lib/gprpp/global_config_generic.h \
1101 src/core/lib/gprpp/inlined_vector.h \
1102 src/core/lib/gprpp/manual_constructor.h \
1103 src/core/lib/gprpp/map.h \
1104 src/core/lib/gprpp/memory.h \
1105 src/core/lib/gprpp/optional.h \
1106 src/core/lib/gprpp/orphanable.h \
1107 src/core/lib/gprpp/pair.h \
1108 src/core/lib/gprpp/ref_counted.h \
1109 src/core/lib/gprpp/ref_counted_ptr.h \
1110 src/core/lib/gprpp/sync.h \
1111 src/core/lib/gprpp/thd.h \
1112 src/core/lib/http/format_request.h \
1113 src/core/lib/http/httpcli.h \
1114 src/core/lib/http/parser.h \
1115 src/core/lib/iomgr/block_annotate.h \
1116 src/core/lib/iomgr/buffer_list.h \
1117 src/core/lib/iomgr/call_combiner.h \
1118 src/core/lib/iomgr/cfstream_handle.h \
1119 src/core/lib/iomgr/closure.h \
1120 src/core/lib/iomgr/combiner.h \
1121 src/core/lib/iomgr/dynamic_annotations.h \
1122 src/core/lib/iomgr/endpoint.h \
1123 src/core/lib/iomgr/endpoint_cfstream.h \
1124 src/core/lib/iomgr/endpoint_pair.h \
1125 src/core/lib/iomgr/error.h \
1126 src/core/lib/iomgr/error_cfstream.h \
1127 src/core/lib/iomgr/error_internal.h \
1128 src/core/lib/iomgr/ev_epoll1_linux.h \
1129 src/core/lib/iomgr/ev_epollex_linux.h \
1130 src/core/lib/iomgr/ev_poll_posix.h \
1131 src/core/lib/iomgr/ev_posix.h \
1132 src/core/lib/iomgr/exec_ctx.h \
1133 src/core/lib/iomgr/executor.h \
1134 src/core/lib/iomgr/gethostname.h \
1135 src/core/lib/iomgr/grpc_if_nametoindex.h \
1136 src/core/lib/iomgr/internal_errqueue.h \
1137 src/core/lib/iomgr/iocp_windows.h \
1138 src/core/lib/iomgr/iomgr.h \
1139 src/core/lib/iomgr/iomgr_custom.h \
1140 src/core/lib/iomgr/iomgr_internal.h \
1141 src/core/lib/iomgr/iomgr_posix.h \
1142 src/core/lib/iomgr/is_epollexclusive_available.h \
1143 src/core/lib/iomgr/load_file.h \
1144 src/core/lib/iomgr/lockfree_event.h \
1145 src/core/lib/iomgr/nameser.h \
1146 src/core/lib/iomgr/polling_entity.h \
1147 src/core/lib/iomgr/pollset.h \
1148 src/core/lib/iomgr/pollset_custom.h \
1149 src/core/lib/iomgr/pollset_set.h \
1150 src/core/lib/iomgr/pollset_set_custom.h \
1151 src/core/lib/iomgr/pollset_set_windows.h \
1152 src/core/lib/iomgr/pollset_windows.h \
1153 src/core/lib/iomgr/port.h \
1154 src/core/lib/iomgr/resolve_address.h \
1155 src/core/lib/iomgr/resolve_address_custom.h \
1156 src/core/lib/iomgr/resource_quota.h \
1157 src/core/lib/iomgr/sockaddr.h \
1158 src/core/lib/iomgr/sockaddr_custom.h \
1159 src/core/lib/iomgr/sockaddr_posix.h \
1160 src/core/lib/iomgr/sockaddr_utils.h \
1161 src/core/lib/iomgr/sockaddr_windows.h \
1162 src/core/lib/iomgr/socket_factory_posix.h \
1163 src/core/lib/iomgr/socket_mutator.h \
1164 src/core/lib/iomgr/socket_utils.h \
1165 src/core/lib/iomgr/socket_utils_posix.h \
1166 src/core/lib/iomgr/socket_windows.h \
1167 src/core/lib/iomgr/sys_epoll_wrapper.h \
1168 src/core/lib/iomgr/tcp_client.h \
1169 src/core/lib/iomgr/tcp_client_posix.h \
1170 src/core/lib/iomgr/tcp_custom.h \
1171 src/core/lib/iomgr/tcp_posix.h \
1172 src/core/lib/iomgr/tcp_server.h \
1173 src/core/lib/iomgr/tcp_server_utils_posix.h \
1174 src/core/lib/iomgr/tcp_windows.h \
1175 src/core/lib/iomgr/time_averaged_stats.h \
1176 src/core/lib/iomgr/timer.h \
1177 src/core/lib/iomgr/timer_custom.h \
1178 src/core/lib/iomgr/timer_heap.h \
1179 src/core/lib/iomgr/timer_manager.h \
1180 src/core/lib/iomgr/udp_server.h \
1181 src/core/lib/iomgr/unix_sockets_posix.h \
1182 src/core/lib/iomgr/wakeup_fd_pipe.h \
1183 src/core/lib/iomgr/wakeup_fd_posix.h \
1184 src/core/lib/json/json.h \
1185 src/core/lib/json/json_common.h \
1186 src/core/lib/json/json_reader.h \
1187 src/core/lib/json/json_writer.h \
1188 src/core/lib/profiling/timers.h \
1189 src/core/lib/slice/b64.h \
1190 src/core/lib/slice/percent_encoding.h \
1191 src/core/lib/slice/slice_hash_table.h \
1192 src/core/lib/slice/slice_internal.h \
1193 src/core/lib/slice/slice_string_helpers.h \
1194 src/core/lib/slice/slice_utils.h \
1195 src/core/lib/slice/slice_weak_hash_table.h \
1196 src/core/lib/surface/api_trace.h \
1197 src/core/lib/surface/call.h \
1198 src/core/lib/surface/call_test_only.h \
1199 src/core/lib/surface/channel.h \
1200 src/core/lib/surface/channel_init.h \
1201 src/core/lib/surface/channel_stack_type.h \
1202 src/core/lib/surface/completion_queue.h \
1203 src/core/lib/surface/completion_queue_factory.h \
1204 src/core/lib/surface/event_string.h \
1205 src/core/lib/surface/init.h \
1206 src/core/lib/surface/lame_client.h \
1207 src/core/lib/surface/server.h \
1208 src/core/lib/surface/validate_metadata.h \
1209 src/core/lib/transport/bdp_estimator.h \
1210 src/core/lib/transport/byte_stream.h \
1211 src/core/lib/transport/connectivity_state.h \
1212 src/core/lib/transport/error_utils.h \
1213 src/core/lib/transport/http2_errors.h \
1214 src/core/lib/transport/metadata.h \
1215 src/core/lib/transport/metadata_batch.h \
1216 src/core/lib/transport/pid_controller.h \
1217 src/core/lib/transport/static_metadata.h \
1218 src/core/lib/transport/status_conversion.h \
1219 src/core/lib/transport/status_metadata.h \
1220 src/core/lib/transport/timeout_encoding.h \
1221 src/core/lib/transport/transport.h \
1222 src/core/lib/transport/transport_impl.h \
1223 src/core/lib/uri/uri_parser.h \
1225 src/cpp/client/channel_cc.cc \
1226 src/cpp/client/client_context.cc \
1227 src/cpp/client/client_interceptor.cc \
1228 src/cpp/client/create_channel.cc \
1229 src/cpp/client/create_channel_internal.cc \
1230 src/cpp/client/create_channel_internal.h \
1231 src/cpp/client/create_channel_posix.cc \
1232 src/cpp/client/credentials_cc.cc \
1233 src/cpp/client/generic_stub.cc \
1234 src/cpp/client/insecure_credentials.cc \
1235 src/cpp/client/secure_credentials.cc \
1236 src/cpp/client/secure_credentials.h \
1237 src/cpp/codegen/codegen_init.cc \
1238 src/cpp/common/alarm.cc \
1239 src/cpp/common/auth_property_iterator.cc \
1240 src/cpp/common/channel_arguments.cc \
1241 src/cpp/common/channel_filter.cc \
1242 src/cpp/common/channel_filter.h \
1243 src/cpp/common/completion_queue_cc.cc \
1244 src/cpp/common/core_codegen.cc \
1245 src/cpp/common/resource_quota_cc.cc \
1246 src/cpp/common/rpc_method.cc \
1247 src/cpp/common/secure_auth_context.cc \
1248 src/cpp/common/secure_auth_context.h \
1249 src/cpp/common/secure_channel_arguments.cc \
1250 src/cpp/common/secure_create_auth_context.cc \
1251 src/cpp/common/validate_service_config.cc \
1252 src/cpp/common/version_cc.cc \
1253 src/cpp/server/async_generic_service.cc \
1254 src/cpp/server/channel_argument_option.cc \
1255 src/cpp/server/create_default_thread_pool.cc \
1256 src/cpp/server/dynamic_thread_pool.cc \
1257 src/cpp/server/dynamic_thread_pool.h \
1258 src/cpp/server/external_connection_acceptor_impl.cc \
1259 src/cpp/server/external_connection_acceptor_impl.h \
1260 src/cpp/server/health/default_health_check_service.cc \
1261 src/cpp/server/health/default_health_check_service.h \
1262 src/cpp/server/health/health_check_service.cc \
1263 src/cpp/server/health/health_check_service_server_builder_option.cc \
1264 src/cpp/server/insecure_server_credentials.cc \
1265 src/cpp/server/secure_server_credentials.cc \
1266 src/cpp/server/secure_server_credentials.h \
1267 src/cpp/server/server_builder.cc \
1268 src/cpp/server/server_cc.cc \
1269 src/cpp/server/server_context.cc \
1270 src/cpp/server/server_credentials.cc \
1271 src/cpp/server/server_posix.cc \
1272 src/cpp/server/thread_pool_interface.h \
1273 src/cpp/thread_manager/thread_manager.cc \
1274 src/cpp/thread_manager/thread_manager.h \
1275 src/cpp/util/byte_buffer_cc.cc \
1276 src/cpp/util/status.cc \
1277 src/cpp/util/string_ref.cc \
1278 src/cpp/util/time_cc.cc \
1279 third_party/nanopb/pb.h \
1280 third_party/nanopb/pb_common.c \
1281 third_party/nanopb/pb_common.h \
1282 third_party/nanopb/pb_decode.c \
1283 third_party/nanopb/pb_decode.h \
1284 third_party/nanopb/pb_encode.c \
1285 third_party/nanopb/pb_encode.h
1287 # This tag can be used to specify the character encoding of the source files
1288 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
1289 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
1290 # documentation (see: http://www.gnu.org/software/libiconv) for the list of
1291 # possible encodings.
1292 # The default value is: UTF-8.
1294 INPUT_ENCODING = UTF-8
1296 # If the value of the INPUT tag contains directories, you can use the
1297 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
1298 # *.h) to filter out the source-files in the directories. If left blank the
1299 # following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
1300 # *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
1301 # *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
1302 # *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
1303 # *.qsf, *.as and *.js.
1307 # The RECURSIVE tag can be used to specify whether or not subdirectories should
1308 # be searched for input files as well.
1309 # The default value is: NO.
1313 # The EXCLUDE tag can be used to specify files and/or directories that should be
1314 # excluded from the INPUT source files. This way you can easily exclude a
1315 # subdirectory from a directory tree whose root is specified with the INPUT tag.
1317 # Note that relative paths are relative to the directory from which doxygen is
1322 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
1323 # directories that are symbolic links (a Unix file system feature) are excluded
1325 # The default value is: NO.
1327 EXCLUDE_SYMLINKS = NO
1329 # If the value of the INPUT tag contains directories, you can use the
1330 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
1331 # certain files from those directories.
1333 # Note that the wildcards are matched against the file with absolute path, so to
1334 # exclude all test directories for example use the pattern */test/*
1338 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
1339 # (namespaces, classes, functions, etc.) that should be excluded from the
1340 # output. The symbol name can be a fully qualified name, a word, or if the
1341 # wildcard * is used, a substring. Examples: ANamespace, AClass,
1342 # AClass::ANamespace, ANamespace::*Test
1344 # Note that the wildcards are matched against the file with absolute path, so to
1345 # exclude all test directories use the pattern */test/*
1349 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
1350 # that contain example code fragments that are included (see the \include
1355 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
1356 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
1357 # *.h) to filter out the source-files in the directories. If left blank all
1358 # files are included.
1362 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
1363 # searched for input files to be used with the \include or \dontinclude commands
1364 # irrespective of the value of the RECURSIVE tag.
1365 # The default value is: NO.
1367 EXAMPLE_RECURSIVE = NO
1369 # The IMAGE_PATH tag can be used to specify one or more files or directories
1370 # that contain images that are to be included in the documentation (see the
1375 # The INPUT_FILTER tag can be used to specify a program that doxygen should
1376 # invoke to filter for each input file. Doxygen will invoke the filter program
1377 # by executing (via popen()) the command:
1379 # <filter> <input-file>
1381 # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
1382 # name of an input file. Doxygen will then use the output that the filter
1383 # program writes to standard output. If FILTER_PATTERNS is specified, this tag
1386 # Note that the filter must not add or remove lines; it is applied before the
1387 # code is scanned, but not when the output code is generated. If lines are added
1388 # or removed, the anchors will not be placed correctly.
1392 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
1393 # basis. Doxygen will compare the file name with each pattern and apply the
1394 # filter if there is a match. The filters are a list of the form: pattern=filter
1395 # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
1396 # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
1397 # patterns match the file name, INPUT_FILTER is applied.
1401 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
1402 # INPUT_FILTER) will also be used to filter the input files that are used for
1403 # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
1404 # The default value is: NO.
1406 FILTER_SOURCE_FILES = NO
1408 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
1409 # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
1410 # it is also possible to disable source filtering for a specific pattern using
1411 # *.ext= (so without naming a filter).
1412 # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
1414 FILTER_SOURCE_PATTERNS =
1416 # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
1417 # is part of the input, its contents will be placed on the main page
1418 # (index.html). This can be useful if you have a project on for instance GitHub
1419 # and want to reuse the introduction page also for the doxygen output.
1421 USE_MDFILE_AS_MAINPAGE =
1423 #---------------------------------------------------------------------------
1424 # Configuration options related to source browsing
1425 #---------------------------------------------------------------------------
1427 # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
1428 # generated. Documented entities will be cross-referenced with these sources.
1430 # Note: To get rid of all source code in the generated output, make sure that
1431 # also VERBATIM_HEADERS is set to NO.
1432 # The default value is: NO.
1436 # Setting the INLINE_SOURCES tag to YES will include the body of functions,
1437 # classes and enums directly into the documentation.
1438 # The default value is: NO.
1442 # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
1443 # special comment blocks from generated source code fragments. Normal C, C++ and
1444 # Fortran comments will always remain visible.
1445 # The default value is: YES.
1447 STRIP_CODE_COMMENTS = YES
1449 # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
1450 # function all documented functions referencing it will be listed.
1451 # The default value is: NO.
1453 REFERENCED_BY_RELATION = NO
1455 # If the REFERENCES_RELATION tag is set to YES then for each documented function
1456 # all documented entities called/used by that function will be listed.
1457 # The default value is: NO.
1459 REFERENCES_RELATION = NO
1461 # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
1462 # to YES then the hyperlinks from functions in REFERENCES_RELATION and
1463 # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
1464 # link to the documentation.
1465 # The default value is: YES.
1467 REFERENCES_LINK_SOURCE = YES
1469 # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
1470 # source code will show a tooltip with additional information such as prototype,
1471 # brief description and links to the definition and documentation. Since this
1472 # will make the HTML file larger and loading of large files a bit slower, you
1473 # can opt to disable this feature.
1474 # The default value is: YES.
1475 # This tag requires that the tag SOURCE_BROWSER is set to YES.
1477 SOURCE_TOOLTIPS = YES
1479 # If the USE_HTAGS tag is set to YES then the references to source code will
1480 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
1481 # source browser. The htags tool is part of GNU's global source tagging system
1482 # (see http://www.gnu.org/software/global/global.html). You will need version
1485 # To use it do the following:
1486 # - Install the latest version of global
1487 # - Enable SOURCE_BROWSER and USE_HTAGS in the config file
1488 # - Make sure the INPUT points to the root of the source tree
1489 # - Run doxygen as normal
1491 # Doxygen will invoke htags (and that will in turn invoke gtags), so these
1492 # tools must be available from the command line (i.e. in the search path).
1494 # The result: instead of the source browser generated by doxygen, the links to
1495 # source code will now point to the output of htags.
1496 # The default value is: NO.
1497 # This tag requires that the tag SOURCE_BROWSER is set to YES.
1501 # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
1502 # verbatim copy of the header file for each class for which an include is
1503 # specified. Set to NO to disable this.
1504 # See also: Section \class.
1505 # The default value is: YES.
1507 VERBATIM_HEADERS = YES
1509 #---------------------------------------------------------------------------
1510 # Configuration options related to the alphabetical class index
1511 #---------------------------------------------------------------------------
1513 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
1514 # compounds will be generated. Enable this if the project contains a lot of
1515 # classes, structs, unions or interfaces.
1516 # The default value is: YES.
1518 ALPHABETICAL_INDEX = YES
1520 # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
1521 # which the alphabetical index list will be split.
1522 # Minimum value: 1, maximum value: 20, default value: 5.
1523 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1525 COLS_IN_ALPHA_INDEX = 5
1527 # In case all classes in a project start with a common prefix, all classes will
1528 # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
1529 # can be used to specify a prefix (or a list of prefixes) that should be ignored
1530 # while generating the index headers.
1531 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1535 #---------------------------------------------------------------------------
1536 # Configuration options related to the HTML output
1537 #---------------------------------------------------------------------------
1539 # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
1540 # The default value is: YES.
1544 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
1545 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1547 # The default directory is: html.
1548 # This tag requires that the tag GENERATE_HTML is set to YES.
1552 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
1553 # generated HTML page (for example: .htm, .php, .asp).
1554 # The default value is: .html.
1555 # This tag requires that the tag GENERATE_HTML is set to YES.
1557 HTML_FILE_EXTENSION = .html
1559 # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1560 # each generated HTML page. If the tag is left blank doxygen will generate a
1563 # To get valid HTML the header file that includes any scripts and style sheets
1564 # that doxygen needs, which is dependent on the configuration options used (e.g.
1565 # the setting GENERATE_TREEVIEW). It is highly recommended to start with a
1566 # default header using
1567 # doxygen -w html new_header.html new_footer.html new_stylesheet.css
1569 # and then modify the file new_header.html. See also section "Doxygen usage"
1570 # for information on how to generate the default header that doxygen normally
1572 # Note: The header is subject to change so you typically have to regenerate the
1573 # default header when upgrading to a newer version of doxygen. For a description
1574 # of the possible markers and block names see the documentation.
1575 # This tag requires that the tag GENERATE_HTML is set to YES.
1579 # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1580 # generated HTML page. If the tag is left blank doxygen will generate a standard
1581 # footer. See HTML_HEADER for more information on how to generate a default
1582 # footer and what special commands can be used inside the footer. See also
1583 # section "Doxygen usage" for information on how to generate the default footer
1584 # that doxygen normally uses.
1585 # This tag requires that the tag GENERATE_HTML is set to YES.
1589 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1590 # sheet that is used by each HTML page. It can be used to fine-tune the look of
1591 # the HTML output. If left blank doxygen will generate a default style sheet.
1592 # See also section "Doxygen usage" for information on how to generate the style
1593 # sheet that doxygen normally uses.
1594 # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
1595 # it is more robust and this tag (HTML_STYLESHEET) will in the future become
1597 # This tag requires that the tag GENERATE_HTML is set to YES.
1601 # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1602 # cascading style sheets that are included after the standard style sheets
1603 # created by doxygen. Using this option one can overrule certain style aspects.
1604 # This is preferred over using HTML_STYLESHEET since it does not replace the
1605 # standard style sheet and is therefore more robust against future updates.
1606 # Doxygen will copy the style sheet files to the output directory.
1607 # Note: The order of the extra style sheet files is of importance (e.g. the last
1608 # style sheet in the list overrules the setting of the previous ones in the
1609 # list). For an example see the documentation.
1610 # This tag requires that the tag GENERATE_HTML is set to YES.
1612 HTML_EXTRA_STYLESHEET =
1614 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
1615 # other source files which should be copied to the HTML output directory. Note
1616 # that these files will be copied to the base HTML output directory. Use the
1617 # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1618 # files. In the HTML_STYLESHEET file, use the file name only. Also note that the
1619 # files will be copied as-is; there are no commands or markers available.
1620 # This tag requires that the tag GENERATE_HTML is set to YES.
1624 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
1625 # will adjust the colors in the style sheet and background images according to
1626 # this color. Hue is specified as an angle on a colorwheel, see
1627 # http://en.wikipedia.org/wiki/Hue for more information. For instance the value
1628 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
1629 # purple, and 360 is red again.
1630 # Minimum value: 0, maximum value: 359, default value: 220.
1631 # This tag requires that the tag GENERATE_HTML is set to YES.
1633 HTML_COLORSTYLE_HUE = 220
1635 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
1636 # in the HTML output. For a value of 0 the output will use grayscales only. A
1637 # value of 255 will produce the most vivid colors.
1638 # Minimum value: 0, maximum value: 255, default value: 100.
1639 # This tag requires that the tag GENERATE_HTML is set to YES.
1641 HTML_COLORSTYLE_SAT = 100
1643 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
1644 # luminance component of the colors in the HTML output. Values below 100
1645 # gradually make the output lighter, whereas values above 100 make the output
1646 # darker. The value divided by 100 is the actual gamma applied, so 80 represents
1647 # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
1649 # Minimum value: 40, maximum value: 240, default value: 80.
1650 # This tag requires that the tag GENERATE_HTML is set to YES.
1652 HTML_COLORSTYLE_GAMMA = 80
1654 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1655 # page will contain the date and time when the page was generated. Setting this
1656 # to NO can help when comparing the output of multiple runs.
1657 # The default value is: YES.
1658 # This tag requires that the tag GENERATE_HTML is set to YES.
1660 HTML_TIMESTAMP = YES
1662 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1663 # documentation will contain sections that can be hidden and shown after the
1665 # The default value is: NO.
1666 # This tag requires that the tag GENERATE_HTML is set to YES.
1668 HTML_DYNAMIC_SECTIONS = NO
1670 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
1671 # shown in the various tree structured indices initially; the user can expand
1672 # and collapse entries dynamically later on. Doxygen will expand the tree to
1673 # such a level that at most the specified number of entries are visible (unless
1674 # a fully collapsed tree already exceeds this amount). So setting the number of
1675 # entries 1 will produce a full collapsed tree by default. 0 is a special value
1676 # representing an infinite number of entries and will result in a full expanded
1678 # Minimum value: 0, maximum value: 9999, default value: 100.
1679 # This tag requires that the tag GENERATE_HTML is set to YES.
1681 HTML_INDEX_NUM_ENTRIES = 100
1683 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
1684 # generated that can be used as input for Apple's Xcode 3 integrated development
1685 # environment (see: http://developer.apple.com/tools/xcode/), introduced with
1686 # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
1687 # Makefile in the HTML output directory. Running make will produce the docset in
1688 # that directory and running make install will install the docset in
1689 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
1690 # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1691 # for more information.
1692 # The default value is: NO.
1693 # This tag requires that the tag GENERATE_HTML is set to YES.
1695 GENERATE_DOCSET = NO
1697 # This tag determines the name of the docset feed. A documentation feed provides
1698 # an umbrella under which multiple documentation sets from a single provider
1699 # (such as a company or product suite) can be grouped.
1700 # The default value is: Doxygen generated docs.
1701 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1703 DOCSET_FEEDNAME = "Doxygen generated docs"
1705 # This tag specifies a string that should uniquely identify the documentation
1706 # set bundle. This should be a reverse domain-name style string, e.g.
1707 # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
1708 # The default value is: org.doxygen.Project.
1709 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1711 DOCSET_BUNDLE_ID = org.doxygen.Project
1713 # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
1714 # the documentation publisher. This should be a reverse domain-name style
1715 # string, e.g. com.mycompany.MyDocSet.documentation.
1716 # The default value is: org.doxygen.Publisher.
1717 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1719 DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1721 # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
1722 # The default value is: Publisher.
1723 # This tag requires that the tag GENERATE_DOCSET is set to YES.
1725 DOCSET_PUBLISHER_NAME = Publisher
1727 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1728 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
1729 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
1730 # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
1733 # The HTML Help Workshop contains a compiler that can convert all HTML output
1734 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
1735 # files are now used as the Windows 98 help format, and will replace the old
1736 # Windows help format (.hlp) on all Windows platforms in the future. Compressed
1737 # HTML files also contain an index, a table of contents, and you can search for
1738 # words in the documentation. The HTML workshop also contains a viewer for
1739 # compressed HTML files.
1740 # The default value is: NO.
1741 # This tag requires that the tag GENERATE_HTML is set to YES.
1743 GENERATE_HTMLHELP = NO
1745 # The CHM_FILE tag can be used to specify the file name of the resulting .chm
1746 # file. You can add a path in front of the file if the result should not be
1747 # written to the html output directory.
1748 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1752 # The HHC_LOCATION tag can be used to specify the location (absolute path
1753 # including file name) of the HTML help compiler (hhc.exe). If non-empty,
1754 # doxygen will try to run the HTML help compiler on the generated index.hhp.
1755 # The file has to be specified with full path.
1756 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1760 # The GENERATE_CHI flag controls if a separate .chi index file is generated
1761 # (YES) or that it should be included in the master .chm file (NO).
1762 # The default value is: NO.
1763 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1767 # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
1768 # and project file content.
1769 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1771 CHM_INDEX_ENCODING =
1773 # The BINARY_TOC flag controls whether a binary table of contents is generated
1774 # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
1775 # enables the Previous and Next buttons.
1776 # The default value is: NO.
1777 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1781 # The TOC_EXPAND flag can be set to YES to add extra items for group members to
1782 # the table of contents of the HTML help documentation and to the tree view.
1783 # The default value is: NO.
1784 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1788 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1789 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
1790 # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
1791 # (.qch) of the generated HTML documentation.
1792 # The default value is: NO.
1793 # This tag requires that the tag GENERATE_HTML is set to YES.
1797 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
1798 # the file name of the resulting .qch file. The path specified is relative to
1799 # the HTML output folder.
1800 # This tag requires that the tag GENERATE_QHP is set to YES.
1804 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
1805 # Project output. For more information please see Qt Help Project / Namespace
1806 # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
1807 # The default value is: org.doxygen.Project.
1808 # This tag requires that the tag GENERATE_QHP is set to YES.
1810 QHP_NAMESPACE = org.doxygen.Project
1812 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
1813 # Help Project output. For more information please see Qt Help Project / Virtual
1814 # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
1816 # The default value is: doc.
1817 # This tag requires that the tag GENERATE_QHP is set to YES.
1819 QHP_VIRTUAL_FOLDER = doc
1821 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
1822 # filter to add. For more information please see Qt Help Project / Custom
1823 # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1825 # This tag requires that the tag GENERATE_QHP is set to YES.
1827 QHP_CUST_FILTER_NAME =
1829 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
1830 # custom filter to add. For more information please see Qt Help Project / Custom
1831 # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1833 # This tag requires that the tag GENERATE_QHP is set to YES.
1835 QHP_CUST_FILTER_ATTRS =
1837 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1838 # project's filter section matches. Qt Help Project / Filter Attributes (see:
1839 # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
1840 # This tag requires that the tag GENERATE_QHP is set to YES.
1842 QHP_SECT_FILTER_ATTRS =
1844 # The QHG_LOCATION tag can be used to specify the location of Qt's
1845 # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
1846 # generated .qhp file.
1847 # This tag requires that the tag GENERATE_QHP is set to YES.
1851 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1852 # generated, together with the HTML files, they form an Eclipse help plugin. To
1853 # install this plugin and make it available under the help contents menu in
1854 # Eclipse, the contents of the directory containing the HTML and XML files needs
1855 # to be copied into the plugins directory of eclipse. The name of the directory
1856 # within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
1857 # After copying Eclipse needs to be restarted before the help appears.
1858 # The default value is: NO.
1859 # This tag requires that the tag GENERATE_HTML is set to YES.
1861 GENERATE_ECLIPSEHELP = NO
1863 # A unique identifier for the Eclipse help plugin. When installing the plugin
1864 # the directory name containing the HTML and XML files should also have this
1865 # name. Each documentation set should have its own identifier.
1866 # The default value is: org.doxygen.Project.
1867 # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
1869 ECLIPSE_DOC_ID = org.doxygen.Project
1871 # If you want full control over the layout of the generated HTML pages it might
1872 # be necessary to disable the index and replace it with your own. The
1873 # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
1874 # of each HTML page. A value of NO enables the index and the value YES disables
1875 # it. Since the tabs in the index contain the same information as the navigation
1876 # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
1877 # The default value is: NO.
1878 # This tag requires that the tag GENERATE_HTML is set to YES.
1882 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1883 # structure should be generated to display hierarchical information. If the tag
1884 # value is set to YES, a side panel will be generated containing a tree-like
1885 # index structure (just like the one that is generated for HTML Help). For this
1886 # to work a browser that supports JavaScript, DHTML, CSS and frames is required
1887 # (i.e. any modern browser). Windows users are probably better off using the
1888 # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
1889 # further fine-tune the look of the index. As an example, the default style
1890 # sheet generated by doxygen has an example that shows how to put an image at
1891 # the root of the tree instead of the PROJECT_NAME. Since the tree basically has
1892 # the same information as the tab index, you could consider setting
1893 # DISABLE_INDEX to YES when enabling this option.
1894 # The default value is: NO.
1895 # This tag requires that the tag GENERATE_HTML is set to YES.
1897 GENERATE_TREEVIEW = NO
1899 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
1900 # doxygen will group on one line in the generated HTML documentation.
1902 # Note that a value of 0 will completely suppress the enum values from appearing
1903 # in the overview section.
1904 # Minimum value: 0, maximum value: 20, default value: 4.
1905 # This tag requires that the tag GENERATE_HTML is set to YES.
1907 ENUM_VALUES_PER_LINE = 4
1909 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
1910 # to set the initial width (in pixels) of the frame in which the tree is shown.
1911 # Minimum value: 0, maximum value: 1500, default value: 250.
1912 # This tag requires that the tag GENERATE_HTML is set to YES.
1914 TREEVIEW_WIDTH = 250
1916 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
1917 # external symbols imported via tag files in a separate window.
1918 # The default value is: NO.
1919 # This tag requires that the tag GENERATE_HTML is set to YES.
1921 EXT_LINKS_IN_WINDOW = NO
1923 # Use this tag to change the font size of LaTeX formulas included as images in
1924 # the HTML documentation. When you change the font size after a successful
1925 # doxygen run you need to manually remove any form_*.png images from the HTML
1926 # output directory to force them to be regenerated.
1927 # Minimum value: 8, maximum value: 50, default value: 10.
1928 # This tag requires that the tag GENERATE_HTML is set to YES.
1930 FORMULA_FONTSIZE = 10
1932 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
1933 # generated for formulas are transparent PNGs. Transparent PNGs are not
1934 # supported properly for IE 6.0, but are supported on all modern browsers.
1936 # Note that when changing this option you need to delete any form_*.png files in
1937 # the HTML output directory before the changes have effect.
1938 # The default value is: YES.
1939 # This tag requires that the tag GENERATE_HTML is set to YES.
1941 FORMULA_TRANSPARENT = YES
1943 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
1944 # http://www.mathjax.org) which uses client side Javascript for the rendering
1945 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
1946 # installed or if you want to formulas look prettier in the HTML output. When
1947 # enabled you may also need to install MathJax separately and configure the path
1948 # to it using the MATHJAX_RELPATH option.
1949 # The default value is: NO.
1950 # This tag requires that the tag GENERATE_HTML is set to YES.
1954 # When MathJax is enabled you can set the default output format to be used for
1955 # the MathJax output. See the MathJax site (see:
1956 # http://docs.mathjax.org/en/latest/output.html) for more details.
1957 # Possible values are: HTML-CSS (which is slower, but has the best
1958 # compatibility), NativeMML (i.e. MathML) and SVG.
1959 # The default value is: HTML-CSS.
1960 # This tag requires that the tag USE_MATHJAX is set to YES.
1962 MATHJAX_FORMAT = HTML-CSS
1964 # When MathJax is enabled you need to specify the location relative to the HTML
1965 # output directory using the MATHJAX_RELPATH option. The destination directory
1966 # should contain the MathJax.js script. For instance, if the mathjax directory
1967 # is located at the same level as the HTML output directory, then
1968 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
1969 # Content Delivery Network so you can quickly see the result without installing
1970 # MathJax. However, it is strongly recommended to install a local copy of
1971 # MathJax from http://www.mathjax.org before deployment.
1972 # The default value is: http://cdn.mathjax.org/mathjax/latest.
1973 # This tag requires that the tag USE_MATHJAX is set to YES.
1975 MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1977 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
1978 # extension names that should be enabled during MathJax rendering. For example
1979 # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
1980 # This tag requires that the tag USE_MATHJAX is set to YES.
1982 MATHJAX_EXTENSIONS =
1984 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
1985 # of code that will be used on startup of the MathJax code. See the MathJax site
1986 # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
1987 # example see the documentation.
1988 # This tag requires that the tag USE_MATHJAX is set to YES.
1992 # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
1993 # the HTML output. The underlying search engine uses javascript and DHTML and
1994 # should work on any modern browser. Note that when using HTML help
1995 # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
1996 # there is already a search function so this one should typically be disabled.
1997 # For large projects the javascript based search engine can be slow, then
1998 # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
1999 # search using the keyboard; to jump to the search box use <access key> + S
2000 # (what the <access key> is depends on the OS and browser, but it is typically
2001 # <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
2002 # key> to jump into the search results window, the results can be navigated
2003 # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
2004 # the search. The filter options can be selected when the cursor is inside the
2005 # search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
2006 # to select a filter and <Enter> or <escape> to activate or cancel the filter
2008 # The default value is: YES.
2009 # This tag requires that the tag GENERATE_HTML is set to YES.
2013 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
2014 # implemented using a web server instead of a web client using Javascript. There
2015 # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
2016 # setting. When disabled, doxygen will generate a PHP script for searching and
2017 # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
2018 # and searching needs to be provided by external tools. See the section
2019 # "External Indexing and Searching" for details.
2020 # The default value is: NO.
2021 # This tag requires that the tag SEARCHENGINE is set to YES.
2023 SERVER_BASED_SEARCH = NO
2025 # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
2026 # script for searching. Instead the search results are written to an XML file
2027 # which needs to be processed by an external indexer. Doxygen will invoke an
2028 # external search engine pointed to by the SEARCHENGINE_URL option to obtain the
2031 # Doxygen ships with an example indexer (doxyindexer) and search engine
2032 # (doxysearch.cgi) which are based on the open source search engine library
2033 # Xapian (see: http://xapian.org/).
2035 # See the section "External Indexing and Searching" for details.
2036 # The default value is: NO.
2037 # This tag requires that the tag SEARCHENGINE is set to YES.
2039 EXTERNAL_SEARCH = NO
2041 # The SEARCHENGINE_URL should point to a search engine hosted by a web server
2042 # which will return the search results when EXTERNAL_SEARCH is enabled.
2044 # Doxygen ships with an example indexer (doxyindexer) and search engine
2045 # (doxysearch.cgi) which are based on the open source search engine library
2046 # Xapian (see: http://xapian.org/). See the section "External Indexing and
2047 # Searching" for details.
2048 # This tag requires that the tag SEARCHENGINE is set to YES.
2052 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
2053 # search data is written to a file for indexing by an external tool. With the
2054 # SEARCHDATA_FILE tag the name of this file can be specified.
2055 # The default file is: searchdata.xml.
2056 # This tag requires that the tag SEARCHENGINE is set to YES.
2058 SEARCHDATA_FILE = searchdata.xml
2060 # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
2061 # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
2062 # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
2063 # projects and redirect the results back to the right project.
2064 # This tag requires that the tag SEARCHENGINE is set to YES.
2066 EXTERNAL_SEARCH_ID =
2068 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
2069 # projects other than the one defined by this configuration file, but that are
2070 # all added to the same external search index. Each project needs to have a
2071 # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
2072 # to a relative location where the documentation can be found. The format is:
2073 # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
2074 # This tag requires that the tag SEARCHENGINE is set to YES.
2076 EXTRA_SEARCH_MAPPINGS =
2078 #---------------------------------------------------------------------------
2079 # Configuration options related to the LaTeX output
2080 #---------------------------------------------------------------------------
2082 # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
2083 # The default value is: YES.
2087 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
2088 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
2090 # The default directory is: latex.
2091 # This tag requires that the tag GENERATE_LATEX is set to YES.
2093 LATEX_OUTPUT = latex
2095 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
2098 # Note that when enabling USE_PDFLATEX this option is only used for generating
2099 # bitmaps for formulas in the HTML output, but not in the Makefile that is
2100 # written to the output directory.
2101 # The default file is: latex.
2102 # This tag requires that the tag GENERATE_LATEX is set to YES.
2104 LATEX_CMD_NAME = latex
2106 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
2108 # The default file is: makeindex.
2109 # This tag requires that the tag GENERATE_LATEX is set to YES.
2111 MAKEINDEX_CMD_NAME = makeindex
2113 # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
2114 # documents. This may be useful for small projects and may help to save some
2116 # The default value is: NO.
2117 # This tag requires that the tag GENERATE_LATEX is set to YES.
2121 # The PAPER_TYPE tag can be used to set the paper type that is used by the
2123 # Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
2124 # 14 inches) and executive (7.25 x 10.5 inches).
2125 # The default value is: a4.
2126 # This tag requires that the tag GENERATE_LATEX is set to YES.
2130 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
2131 # that should be included in the LaTeX output. To get the times font for
2132 # instance you can specify
2133 # EXTRA_PACKAGES=times
2134 # If left blank no extra packages will be included.
2135 # This tag requires that the tag GENERATE_LATEX is set to YES.
2139 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
2140 # generated LaTeX document. The header should contain everything until the first
2141 # chapter. If it is left blank doxygen will generate a standard header. See
2142 # section "Doxygen usage" for information on how to let doxygen write the
2143 # default header to a separate file.
2145 # Note: Only use a user-defined header if you know what you are doing! The
2146 # following commands have a special meaning inside the header: $title,
2147 # $datetime, $date, $doxygenversion, $projectname, $projectnumber,
2148 # $projectbrief, $projectlogo. Doxygen will replace $title with the empty
2149 # string, for the replacement values of the other commands the user is referred
2151 # This tag requires that the tag GENERATE_LATEX is set to YES.
2155 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
2156 # generated LaTeX document. The footer should contain everything after the last
2157 # chapter. If it is left blank doxygen will generate a standard footer. See
2158 # LATEX_HEADER for more information on how to generate a default footer and what
2159 # special commands can be used inside the footer.
2161 # Note: Only use a user-defined footer if you know what you are doing!
2162 # This tag requires that the tag GENERATE_LATEX is set to YES.
2166 # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
2167 # LaTeX style sheets that are included after the standard style sheets created
2168 # by doxygen. Using this option one can overrule certain style aspects. Doxygen
2169 # will copy the style sheet files to the output directory.
2170 # Note: The order of the extra style sheet files is of importance (e.g. the last
2171 # style sheet in the list overrules the setting of the previous ones in the
2173 # This tag requires that the tag GENERATE_LATEX is set to YES.
2175 LATEX_EXTRA_STYLESHEET =
2177 # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
2178 # other source files which should be copied to the LATEX_OUTPUT output
2179 # directory. Note that the files will be copied as-is; there are no commands or
2180 # markers available.
2181 # This tag requires that the tag GENERATE_LATEX is set to YES.
2185 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
2186 # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
2187 # contain links (just like the HTML output) instead of page references. This
2188 # makes the output suitable for online browsing using a PDF viewer.
2189 # The default value is: YES.
2190 # This tag requires that the tag GENERATE_LATEX is set to YES.
2192 PDF_HYPERLINKS = YES
2194 # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
2195 # the PDF file directly from the LaTeX files. Set this option to YES, to get a
2196 # higher quality PDF documentation.
2197 # The default value is: YES.
2198 # This tag requires that the tag GENERATE_LATEX is set to YES.
2202 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
2203 # command to the generated LaTeX files. This will instruct LaTeX to keep running
2204 # if errors occur, instead of asking the user for help. This option is also used
2205 # when generating formulas in HTML.
2206 # The default value is: NO.
2207 # This tag requires that the tag GENERATE_LATEX is set to YES.
2209 LATEX_BATCHMODE = NO
2211 # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
2212 # index chapters (such as File Index, Compound Index, etc.) in the output.
2213 # The default value is: NO.
2214 # This tag requires that the tag GENERATE_LATEX is set to YES.
2216 LATEX_HIDE_INDICES = NO
2218 # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
2219 # code with syntax highlighting in the LaTeX output.
2221 # Note that which sources are shown also depends on other settings such as
2223 # The default value is: NO.
2224 # This tag requires that the tag GENERATE_LATEX is set to YES.
2226 LATEX_SOURCE_CODE = NO
2228 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
2229 # bibliography, e.g. plainnat, or ieeetr. See
2230 # http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
2231 # The default value is: plain.
2232 # This tag requires that the tag GENERATE_LATEX is set to YES.
2234 LATEX_BIB_STYLE = plain
2236 #---------------------------------------------------------------------------
2237 # Configuration options related to the RTF output
2238 #---------------------------------------------------------------------------
2240 # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
2241 # RTF output is optimized for Word 97 and may not look too pretty with other RTF
2243 # The default value is: NO.
2247 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
2248 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
2250 # The default directory is: rtf.
2251 # This tag requires that the tag GENERATE_RTF is set to YES.
2255 # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
2256 # documents. This may be useful for small projects and may help to save some
2258 # The default value is: NO.
2259 # This tag requires that the tag GENERATE_RTF is set to YES.
2263 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
2264 # contain hyperlink fields. The RTF file will contain links (just like the HTML
2265 # output) instead of page references. This makes the output suitable for online
2266 # browsing using Word or some other Word compatible readers that support those
2269 # Note: WordPad (write) and others do not support links.
2270 # The default value is: NO.
2271 # This tag requires that the tag GENERATE_RTF is set to YES.
2275 # Load stylesheet definitions from file. Syntax is similar to doxygen's config
2276 # file, i.e. a series of assignments. You only have to provide replacements,
2277 # missing definitions are set to their default value.
2279 # See also section "Doxygen usage" for information on how to generate the
2280 # default style sheet that doxygen normally uses.
2281 # This tag requires that the tag GENERATE_RTF is set to YES.
2283 RTF_STYLESHEET_FILE =
2285 # Set optional variables used in the generation of an RTF document. Syntax is
2286 # similar to doxygen's config file. A template extensions file can be generated
2287 # using doxygen -e rtf extensionFile.
2288 # This tag requires that the tag GENERATE_RTF is set to YES.
2290 RTF_EXTENSIONS_FILE =
2292 # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
2293 # with syntax highlighting in the RTF output.
2295 # Note that which sources are shown also depends on other settings such as
2297 # The default value is: NO.
2298 # This tag requires that the tag GENERATE_RTF is set to YES.
2300 RTF_SOURCE_CODE = NO
2302 #---------------------------------------------------------------------------
2303 # Configuration options related to the man page output
2304 #---------------------------------------------------------------------------
2306 # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
2307 # classes and files.
2308 # The default value is: NO.
2312 # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
2313 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
2314 # it. A directory man3 will be created inside the directory specified by
2316 # The default directory is: man.
2317 # This tag requires that the tag GENERATE_MAN is set to YES.
2321 # The MAN_EXTENSION tag determines the extension that is added to the generated
2322 # man pages. In case the manual section does not start with a number, the number
2323 # 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
2325 # The default value is: .3.
2326 # This tag requires that the tag GENERATE_MAN is set to YES.
2330 # The MAN_SUBDIR tag determines the name of the directory created within
2331 # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
2332 # MAN_EXTENSION with the initial . removed.
2333 # This tag requires that the tag GENERATE_MAN is set to YES.
2337 # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
2338 # will generate one additional man file for each entity documented in the real
2339 # man page(s). These additional files only source the real man page, but without
2340 # them the man command would be unable to find the correct page.
2341 # The default value is: NO.
2342 # This tag requires that the tag GENERATE_MAN is set to YES.
2346 #---------------------------------------------------------------------------
2347 # Configuration options related to the XML output
2348 #---------------------------------------------------------------------------
2350 # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
2351 # captures the structure of the code including all documentation.
2352 # The default value is: NO.
2356 # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
2357 # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
2359 # The default directory is: xml.
2360 # This tag requires that the tag GENERATE_XML is set to YES.
2364 # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
2365 # listings (including syntax highlighting and cross-referencing information) to
2366 # the XML output. Note that enabling this will significantly increase the size
2367 # of the XML output.
2368 # The default value is: YES.
2369 # This tag requires that the tag GENERATE_XML is set to YES.
2371 XML_PROGRAMLISTING = YES
2373 #---------------------------------------------------------------------------
2374 # Configuration options related to the DOCBOOK output
2375 #---------------------------------------------------------------------------
2377 # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
2378 # that can be used to generate PDF.
2379 # The default value is: NO.
2381 GENERATE_DOCBOOK = NO
2383 # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
2384 # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
2386 # The default directory is: docbook.
2387 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
2389 DOCBOOK_OUTPUT = docbook
2391 # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
2392 # program listings (including syntax highlighting and cross-referencing
2393 # information) to the DOCBOOK output. Note that enabling this will significantly
2394 # increase the size of the DOCBOOK output.
2395 # The default value is: NO.
2396 # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
2398 DOCBOOK_PROGRAMLISTING = NO
2400 #---------------------------------------------------------------------------
2401 # Configuration options for the AutoGen Definitions output
2402 #---------------------------------------------------------------------------
2404 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
2405 # AutoGen Definitions (see http://autogen.sf.net) file that captures the
2406 # structure of the code including all documentation. Note that this feature is
2407 # still experimental and incomplete at the moment.
2408 # The default value is: NO.
2410 GENERATE_AUTOGEN_DEF = NO
2412 #---------------------------------------------------------------------------
2413 # Configuration options related to the Perl module output
2414 #---------------------------------------------------------------------------
2416 # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
2417 # file that captures the structure of the code including all documentation.
2419 # Note that this feature is still experimental and incomplete at the moment.
2420 # The default value is: NO.
2422 GENERATE_PERLMOD = NO
2424 # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
2425 # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
2426 # output from the Perl module output.
2427 # The default value is: NO.
2428 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
2432 # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
2433 # formatted so it can be parsed by a human reader. This is useful if you want to
2434 # understand what is going on. On the other hand, if this tag is set to NO, the
2435 # size of the Perl module output will be much smaller and Perl will parse it
2437 # The default value is: YES.
2438 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
2440 PERLMOD_PRETTY = YES
2442 # The names of the make variables in the generated doxyrules.make file are
2443 # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
2444 # so different doxyrules.make files included by the same Makefile don't
2445 # overwrite each other's variables.
2446 # This tag requires that the tag GENERATE_PERLMOD is set to YES.
2448 PERLMOD_MAKEVAR_PREFIX =
2450 #---------------------------------------------------------------------------
2451 # Configuration options related to the preprocessor
2452 #---------------------------------------------------------------------------
2454 # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
2455 # C-preprocessor directives found in the sources and include files.
2456 # The default value is: YES.
2458 ENABLE_PREPROCESSING = YES
2460 # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
2461 # in the source code. If set to NO, only conditional compilation will be
2462 # performed. Macro expansion can be done in a controlled way by setting
2463 # EXPAND_ONLY_PREDEF to YES.
2464 # The default value is: NO.
2465 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2467 MACRO_EXPANSION = YES
2469 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
2470 # the macro expansion is limited to the macros specified with the PREDEFINED and
2471 # EXPAND_AS_DEFINED tags.
2472 # The default value is: NO.
2473 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2475 EXPAND_ONLY_PREDEF = NO
2477 # If the SEARCH_INCLUDES tag is set to YES, the include files in the
2478 # INCLUDE_PATH will be searched if a #include is found.
2479 # The default value is: YES.
2480 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2482 SEARCH_INCLUDES = YES
2484 # The INCLUDE_PATH tag can be used to specify one or more directories that
2485 # contain include files that are not input files but should be processed by the
2487 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
2491 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
2492 # patterns (like *.h and *.hpp) to filter out the header-files in the
2493 # directories. If left blank, the patterns specified with FILE_PATTERNS will be
2495 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2497 INCLUDE_FILE_PATTERNS =
2499 # The PREDEFINED tag can be used to specify one or more macro names that are
2500 # defined before the preprocessor is started (similar to the -D option of e.g.
2501 # gcc). The argument of the tag is a list of macros of the form: name or
2502 # name=definition (no spaces). If the definition and the "=" are omitted, "=1"
2503 # is assumed. To prevent a macro definition from being undefined via #undef or
2504 # recursively expanded use the := operator instead of the = operator.
2505 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2507 PREDEFINED = GRPC_FINAL= GRPC_OVERIDE=
2509 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
2510 # tag can be used to specify a list of macro names that should be expanded. The
2511 # macro definition that is found in the sources will be used. Use the PREDEFINED
2512 # tag if you want to use a different macro definition that overrules the
2513 # definition found in the source code.
2514 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2518 # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
2519 # remove all references to function-like macros that are alone on a line, have
2520 # an all uppercase name, and do not end with a semicolon. Such function macros
2521 # are typically used for boiler-plate code, and will confuse the parser if not
2523 # The default value is: YES.
2524 # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
2526 SKIP_FUNCTION_MACROS = YES
2528 #---------------------------------------------------------------------------
2529 # Configuration options related to external references
2530 #---------------------------------------------------------------------------
2532 # The TAGFILES tag can be used to specify one or more tag files. For each tag
2533 # file the location of the external documentation should be added. The format of
2534 # a tag file without this location is as follows:
2535 # TAGFILES = file1 file2 ...
2536 # Adding location for the tag files is done as follows:
2537 # TAGFILES = file1=loc1 "file2 = loc2" ...
2538 # where loc1 and loc2 can be relative or absolute paths or URLs. See the
2539 # section "Linking to external documentation" for more information about the use
2541 # Note: Each tag file must have a unique name (where the name does NOT include
2542 # the path). If a tag file is not located in the directory in which doxygen is
2543 # run, you must also specify the path to the tagfile here.
2547 # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
2548 # tag file that is based on the input files it reads. See section "Linking to
2549 # external documentation" for more information about the usage of tag files.
2553 # If the ALLEXTERNALS tag is set to YES, all external class will be listed in
2554 # the class index. If set to NO, only the inherited external classes will be
2556 # The default value is: NO.
2560 # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
2561 # in the modules index. If set to NO, only the current project's groups will be
2563 # The default value is: YES.
2565 EXTERNAL_GROUPS = YES
2567 # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
2568 # the related pages index. If set to NO, only the current project's pages will
2570 # The default value is: YES.
2572 EXTERNAL_PAGES = YES
2574 # The PERL_PATH should be the absolute path and name of the perl script
2575 # interpreter (i.e. the result of 'which perl').
2576 # The default file (with absolute path) is: /usr/bin/perl.
2578 PERL_PATH = /usr/bin/perl
2580 #---------------------------------------------------------------------------
2581 # Configuration options related to the dot tool
2582 #---------------------------------------------------------------------------
2584 # If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
2585 # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
2586 # NO turns the diagrams off. Note that this option also works with HAVE_DOT
2587 # disabled, but it is recommended to install and use dot, since it yields more
2589 # The default value is: YES.
2591 CLASS_DIAGRAMS = YES
2593 # You can define message sequence charts within doxygen comments using the \msc
2594 # command. Doxygen will then run the mscgen tool (see:
2595 # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
2596 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
2597 # the mscgen tool resides. If left empty the tool is assumed to be found in the
2598 # default search path.
2602 # You can include diagrams made with dia in doxygen documentation. Doxygen will
2603 # then run dia to produce the diagram and insert it in the documentation. The
2604 # DIA_PATH tag allows you to specify the directory where the dia binary resides.
2605 # If left empty dia is assumed to be found in the default search path.
2609 # If set to YES the inheritance and collaboration graphs will hide inheritance
2610 # and usage relations if the target is undocumented or is not a class.
2611 # The default value is: YES.
2613 HIDE_UNDOC_RELATIONS = YES
2615 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2616 # available from the path. This tool is part of Graphviz (see:
2617 # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
2618 # Bell Labs. The other options in this section have no effect if this option is
2620 # The default value is: NO.
2624 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
2625 # to run in parallel. When set to 0 doxygen will base this on the number of
2626 # processors available in the system. You can set it explicitly to a value
2627 # larger than 0 to get control over the balance between CPU load and processing
2629 # Minimum value: 0, maximum value: 32, default value: 0.
2630 # This tag requires that the tag HAVE_DOT is set to YES.
2634 # When you want a differently looking font in the dot files that doxygen
2635 # generates you can specify the font name using DOT_FONTNAME. You need to make
2636 # sure dot is able to find the font, which can be done by putting it in a
2637 # standard location or by setting the DOTFONTPATH environment variable or by
2638 # setting DOT_FONTPATH to the directory containing the font.
2639 # The default value is: Helvetica.
2640 # This tag requires that the tag HAVE_DOT is set to YES.
2642 DOT_FONTNAME = Helvetica
2644 # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
2646 # Minimum value: 4, maximum value: 24, default value: 10.
2647 # This tag requires that the tag HAVE_DOT is set to YES.
2651 # By default doxygen will tell dot to use the default font as specified with
2652 # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
2653 # the path where dot can find it using this tag.
2654 # This tag requires that the tag HAVE_DOT is set to YES.
2658 # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
2659 # each documented class showing the direct and indirect inheritance relations.
2660 # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
2661 # The default value is: YES.
2662 # This tag requires that the tag HAVE_DOT is set to YES.
2666 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2667 # graph for each documented class showing the direct and indirect implementation
2668 # dependencies (inheritance, containment, and class references variables) of the
2669 # class with other documented classes.
2670 # The default value is: YES.
2671 # This tag requires that the tag HAVE_DOT is set to YES.
2673 COLLABORATION_GRAPH = NO
2675 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2676 # groups, showing the direct groups dependencies.
2677 # The default value is: YES.
2678 # This tag requires that the tag HAVE_DOT is set to YES.
2682 # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
2683 # collaboration diagrams in a style similar to the OMG's Unified Modeling
2685 # The default value is: NO.
2686 # This tag requires that the tag HAVE_DOT is set to YES.
2690 # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
2691 # class node. If there are many fields or methods and many nodes the graph may
2692 # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
2693 # number of items for each type to make the size more manageable. Set this to 0
2694 # for no limit. Note that the threshold may be exceeded by 50% before the limit
2695 # is enforced. So when you set the threshold to 10, up to 15 fields may appear,
2696 # but if the number exceeds 15, the total amount of fields shown is limited to
2698 # Minimum value: 0, maximum value: 100, default value: 10.
2699 # This tag requires that the tag HAVE_DOT is set to YES.
2701 UML_LIMIT_NUM_FIELDS = 10
2703 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
2704 # collaboration graphs will show the relations between templates and their
2706 # The default value is: NO.
2707 # This tag requires that the tag HAVE_DOT is set to YES.
2709 TEMPLATE_RELATIONS = NO
2711 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
2712 # YES then doxygen will generate a graph for each documented file showing the
2713 # direct and indirect include dependencies of the file with other documented
2715 # The default value is: YES.
2716 # This tag requires that the tag HAVE_DOT is set to YES.
2720 # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
2721 # set to YES then doxygen will generate a graph for each documented file showing
2722 # the direct and indirect include dependencies of the file with other documented
2724 # The default value is: YES.
2725 # This tag requires that the tag HAVE_DOT is set to YES.
2727 INCLUDED_BY_GRAPH = NO
2729 # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2730 # dependency graph for every global function or class method.
2732 # Note that enabling this option will significantly increase the time of a run.
2733 # So in most cases it will be better to enable call graphs for selected
2734 # functions only using the \callgraph command.
2735 # The default value is: NO.
2736 # This tag requires that the tag HAVE_DOT is set to YES.
2740 # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2741 # dependency graph for every global function or class method.
2743 # Note that enabling this option will significantly increase the time of a run.
2744 # So in most cases it will be better to enable caller graphs for selected
2745 # functions only using the \callergraph command.
2746 # The default value is: NO.
2747 # This tag requires that the tag HAVE_DOT is set to YES.
2751 # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2752 # hierarchy of all classes instead of a textual one.
2753 # The default value is: YES.
2754 # This tag requires that the tag HAVE_DOT is set to YES.
2756 GRAPHICAL_HIERARCHY = NO
2758 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2759 # dependencies a directory has on other directories in a graphical way. The
2760 # dependency relations are determined by the #include relations between the
2761 # files in the directories.
2762 # The default value is: YES.
2763 # This tag requires that the tag HAVE_DOT is set to YES.
2765 DIRECTORY_GRAPH = NO
2767 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
2769 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
2770 # to make the SVG files visible in IE 9+ (other browsers do not have this
2772 # Possible values are: png, jpg, gif and svg.
2773 # The default value is: png.
2774 # This tag requires that the tag HAVE_DOT is set to YES.
2776 DOT_IMAGE_FORMAT = png
2778 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
2779 # enable generation of interactive SVG images that allow zooming and panning.
2781 # Note that this requires a modern browser other than Internet Explorer. Tested
2782 # and working are Firefox, Chrome, Safari, and Opera.
2783 # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
2784 # the SVG files visible. Older versions of IE do not have SVG support.
2785 # The default value is: NO.
2786 # This tag requires that the tag HAVE_DOT is set to YES.
2788 INTERACTIVE_SVG = NO
2790 # The DOT_PATH tag can be used to specify the path where the dot tool can be
2791 # found. If left blank, it is assumed the dot tool can be found in the path.
2792 # This tag requires that the tag HAVE_DOT is set to YES.
2796 # The DOTFILE_DIRS tag can be used to specify one or more directories that
2797 # contain dot files that are included in the documentation (see the \dotfile
2799 # This tag requires that the tag HAVE_DOT is set to YES.
2803 # The MSCFILE_DIRS tag can be used to specify one or more directories that
2804 # contain msc files that are included in the documentation (see the \mscfile
2809 # The DIAFILE_DIRS tag can be used to specify one or more directories that
2810 # contain dia files that are included in the documentation (see the \diafile
2815 # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
2816 # path where java can find the plantuml.jar file. If left blank, it is assumed
2817 # PlantUML is not used or called during a preprocessing step. Doxygen will
2818 # generate a warning when it encounters a \startuml command in this case and
2819 # will not generate output for the diagram.
2823 # When using plantuml, the specified paths are searched for files specified by
2824 # the !include statement in a plantuml block.
2826 PLANTUML_INCLUDE_PATH =
2828 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
2829 # that will be shown in the graph. If the number of nodes in a graph becomes
2830 # larger than this value, doxygen will truncate the graph, which is visualized
2831 # by representing a node as a red box. Note that doxygen if the number of direct
2832 # children of the root node in a graph is already larger than
2833 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
2834 # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
2835 # Minimum value: 0, maximum value: 10000, default value: 50.
2836 # This tag requires that the tag HAVE_DOT is set to YES.
2838 DOT_GRAPH_MAX_NODES = 50
2840 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
2841 # generated by dot. A depth value of 3 means that only nodes reachable from the
2842 # root by following a path via at most 3 edges will be shown. Nodes that lay
2843 # further from the root node will be omitted. Note that setting this option to 1
2844 # or 2 may greatly reduce the computation time needed for large code bases. Also
2845 # note that the size of a graph can be further restricted by
2846 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
2847 # Minimum value: 0, maximum value: 1000, default value: 0.
2848 # This tag requires that the tag HAVE_DOT is set to YES.
2850 MAX_DOT_GRAPH_DEPTH = 0
2852 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
2853 # background. This is disabled by default, because dot on Windows does not seem
2854 # to support this out of the box.
2856 # Warning: Depending on the platform used, enabling this option may lead to
2857 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
2859 # The default value is: NO.
2860 # This tag requires that the tag HAVE_DOT is set to YES.
2862 DOT_TRANSPARENT = NO
2864 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
2865 # files in one run (i.e. multiple -o and -T options on the command line). This
2866 # makes dot run faster, but since only newer versions of dot (>1.8.10) support
2867 # this, this feature is disabled by default.
2868 # The default value is: NO.
2869 # This tag requires that the tag HAVE_DOT is set to YES.
2871 DOT_MULTI_TARGETS = NO
2873 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2874 # explaining the meaning of the various boxes and arrows in the dot generated
2876 # The default value is: YES.
2877 # This tag requires that the tag HAVE_DOT is set to YES.
2879 GENERATE_LEGEND = YES
2881 # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
2882 # files that are used to generate the various graphs.
2883 # The default value is: YES.
2884 # This tag requires that the tag HAVE_DOT is set to YES.