1 # This file contains help messages for missing external blobs. Each message has
2 # a tag (MUST be just lower-case text, digits and hyphens) starting in column 1,
3 # followed by a colon (:) to indicate its start. The message can include any
4 # number of lines, including blank lines.
6 # When looking for a tag, Binman uses the value of 'missing-msg' for the entry,
7 # the entry name or the entry type, in that order
10 See the documentation for your board. You may need to build ARM Trusted
11 Firmware and build with BL31=/path/to/bl31.bin
14 Please read the section on ARM Trusted Firmware (ATF) in
15 board/sunxi/README.sunxi64
18 SCP firmware is required for system suspend, but is otherwise optional.
19 Please read the section on SCP firmware in board/sunxi/README.sunxi64
22 See the documentation for IOT2050 board. Your image is missing SEBoot
23 which is mandatory for board startup. Prebuilt SEBoot located at
24 meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin.
27 See the documentation for IOT2050 board. Your image is missing OTP command data
28 block which is used for provisioning the customer keys to the board.
30 meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh
31 for how to generate this binary. If you are not using secure boot or do not
32 intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD.
35 If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for
36 the R5F core(s) to trigger the system reset. One possible source is
37 https://github.com/siemens/k3-rti-wdt.
40 An external TPL is required to initialize DRAM. Get the external TPL
41 binary and build with ROCKCHIP_TPL=/path/to/ddr.bin. One possible source
42 for the external TPL binary is https://github.com/rockchip-linux/rkbin.
45 See the documentation for your board. You may need to build Open Portable
46 Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
49 See the documentation for your board. The OpenSBI git repo is at
50 https://github.com/riscv/opensbi.git
51 You may need to build fw_dynamic.bin first and re-build u-boot with
52 OPENSBI=/path/to/fw_dynamic.bin