2 * Copyright (c) 2019, The OpenThread Authors.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions are met:
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 * 3. Neither the name of the copyright holder nor the
13 * names of its contributors may be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
17 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
20 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26 * POSSIBILITY OF SUCH DAMAGE.
31 * This file includes efr32 compile-time configuration constants
35 #include "board_config.h"
38 #ifndef OPENTHREAD_CORE_EFR32_CONFIG_H_
39 #define OPENTHREAD_CORE_EFR32_CONFIG_H_
42 * @def OPENTHREAD_CONFIG_LOG_OUTPUT
44 * The efr32 platform provides an otPlatLog() function.
46 #ifndef OPENTHREAD_CONFIG_LOG_OUTPUT /* allow command line override */
47 #define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
51 * @def OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT
53 * We dont support sub-gig frequencies on MG21.
57 #define OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT 0
60 * @def OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT
62 * Define to 1 if you want to enable physical layer to support OQPSK modulation in 2.4GHz band.
65 #if RADIO_CONFIG_2P4GHZ_OQPSK_SUPPORT
66 #define OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT 1
68 #define OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT 0
72 * @def OPENTHREAD_CONFIG_PLATFORM_INFO
74 * The platform-specific string to insert into the OpenThread version string.
77 #define OPENTHREAD_CONFIG_PLATFORM_INFO "EFR32"
80 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
82 * Define to 1 if you want to enable software retransmission logic.
85 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE 1
88 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
90 * Define to 1 if you want to enable software CSMA-CA backoff logic.
93 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE 1
96 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
98 * Define to 1 if you want to enable software transmission security logic.
101 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE 0
104 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE
106 * Define to 1 if you want to enable software energy scanning logic.
109 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE 1
112 * @def OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE
114 * Define to 1 to enable otPlatFlash* APIs to support non-volatile storage.
116 * When defined to 1, the platform MUST implement the otPlatFlash* APIs instead of the otPlatSettings* APIs.
119 #define OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE 0
122 * @def RADIO_CONFIG_SRC_MATCH_SHORT_ENTRY_NUM
124 * The number of short source address table entries.
127 #define RADIO_CONFIG_SRC_MATCH_SHORT_ENTRY_NUM 6
130 * @def RADIO_CONFIG_SRC_MATCH_EXT_ENTRY_NUM
132 * The number of extended source address table entries.
135 #define RADIO_CONFIG_SRC_MATCH_EXT_ENTRY_NUM 6
138 * @def OPENTHREAD_CONFIG_NCP_UART_ENABLE
140 * Define to 1 to enable NCP UART support.
143 #define OPENTHREAD_CONFIG_NCP_UART_ENABLE 1
145 #endif // OPENTHREAD_CORE_EFR32_CONFIG_H_