third_party/nlio/repo/Makefile.in

   1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 #
  18 #    Copyright 2015-2018 Nest Labs Inc. All Rights Reserved.
  19 #
  20 #    Licensed under the Apache License, Version 2.0 (the "License");
  21 #    you may not use this file except in compliance with the License.
  22 #    You may obtain a copy of the License at
  23 #
  24 #    http://www.apache.org/licenses/LICENSE-2.0
  25 #
  26 #    Unless required by applicable law or agreed to in writing, software
  27 #    distributed under the License is distributed on an "AS IS" BASIS,
  28 #    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  29 #    See the License for the specific language governing permissions and
  30 #    limitations under the License.
  31 #
  32
  33 #
  34 #    Description:
  35 #      This file is the GNU automake template for the Nest memory-
  36 #      mapped I/O library.
  37
  38 VPATH = @srcdir@
  39 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  40 am__make_running_with_option = \
  41   case $${target_option-} in \
  42       ?) ;; \
  43       *) echo "am__make_running_with_option: internal error: invalid" \
  44               "target option '$${target_option-}' specified" >&2; \
  45          exit 1;; \
  46   esac; \
  47   has_opt=no; \
  48   sane_makeflags=$$MAKEFLAGS; \
  49   if $(am__is_gnu_make); then \
  50     sane_makeflags=$$MFLAGS; \
  51   else \
  52     case $$MAKEFLAGS in \
  53       *\\[\ \   ]*) \
  54         bs=\\; \
  55         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  56           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  57     esac; \
  58   fi; \
  59   skip_next=no; \
  60   strip_trailopt () \
  61   { \
  62     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  63   }; \
  64   for flg in $$sane_makeflags; do \
  65     test $$skip_next = yes && { skip_next=no; continue; }; \
  66     case $$flg in \
  67       *=*|--*) continue;; \
  68         -*I) strip_trailopt 'I'; skip_next=yes;; \
  69       -*I?*) strip_trailopt 'I';; \
  70         -*O) strip_trailopt 'O'; skip_next=yes;; \
  71       -*O?*) strip_trailopt 'O';; \
  72         -*l) strip_trailopt 'l'; skip_next=yes;; \
  73       -*l?*) strip_trailopt 'l';; \
  74       -[dEDm]) skip_next=yes;; \
  75       -[JT]) skip_next=yes;; \
  76     esac; \
  77     case $$flg in \
  78       *$$target_option*) has_opt=yes; break;; \
  79     esac; \
  80   done; \
  81   test $$has_opt = yes
  82 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  83 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  84 pkgdatadir = $(datadir)/@PACKAGE@
  85 pkgincludedir = $(includedir)/@PACKAGE@
  86 pkglibdir = $(libdir)/@PACKAGE@
  87 pkglibexecdir = $(libexecdir)/@PACKAGE@
  88 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  89 install_sh_DATA = $(install_sh) -c -m 644
  90 install_sh_PROGRAM = $(install_sh) -c
  91 install_sh_SCRIPT = $(install_sh) -c
  92 INSTALL_HEADER = $(INSTALL_DATA)
  93 transform = $(program_transform_name)
  94 NORMAL_INSTALL = :
  95 PRE_INSTALL = :
  96 POST_INSTALL = :
  97 NORMAL_UNINSTALL = :
  98 PRE_UNINSTALL = :
  99 POST_UNINSTALL = :
 100 build_triplet = @build@
 101 host_triplet = @host@
 102 target_triplet = @target@
 103 subdir = .
 104 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
 105         $(top_srcdir)/configure $(am__configure_deps) \
 106         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs \
 107         $(dist_doc_DATA) \
 108         third_party/nlbuild-autotools/repo/third_party/autoconf/ar-lib \
 109         third_party/nlbuild-autotools/repo/third_party/autoconf/compile \
 110         third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess \
 111         third_party/nlbuild-autotools/repo/third_party/autoconf/config.sub \
 112         third_party/nlbuild-autotools/repo/third_party/autoconf/depcomp \
 113         third_party/nlbuild-autotools/repo/third_party/autoconf/install-sh \
 114         third_party/nlbuild-autotools/repo/third_party/autoconf/missing \
 115         third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs \
 116         third_party/nlbuild-autotools/repo/third_party/autoconf/py-compile \
 117         third_party/nlbuild-autotools/repo/third_party/autoconf/ltmain.sh \
 118         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/compile \
 119         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess \
 120         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.sub \
 121         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/install-sh \
 122         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/ltmain.sh \
 123         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/missing
 124 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 125 am__aclocal_m4_deps = $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/ax_check_compiler.m4 \
 126         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_coverage.m4 \
 127         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_coverage_reporting.m4 \
 128         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_debug.m4 \
 129         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_docs.m4 \
 130         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_optimization.m4 \
 131         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_tests.m4 \
 132         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_filtered_canonical.m4 \
 133         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_werror.m4 \
 134         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_with_package.m4 \
 135         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/libtool.m4 \
 136         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltoptions.m4 \
 137         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltsugar.m4 \
 138         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltversion.m4 \
 139         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/lt~obsolete.m4 \
 140         $(top_srcdir)/configure.ac
 141 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 142         $(ACLOCAL_M4)
 143 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 144  configure.lineno config.status.lineno
 145 mkinstalldirs = $(SHELL) \
 146         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs
 147 CONFIG_HEADER = $(top_builddir)/include/nlio-config.h
 148 CONFIG_CLEAN_FILES =
 149 CONFIG_CLEAN_VPATH_FILES =
 150 AM_V_P = $(am__v_P_@AM_V@)
 151 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 152 am__v_P_0 = false
 153 am__v_P_1 = :
 154 AM_V_GEN = $(am__v_GEN_@AM_V@)
 155 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 156 am__v_GEN_0 = @echo "  GEN     " $@;
 157 am__v_GEN_1 =
 158 AM_V_at = $(am__v_at_@AM_V@)
 159 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 160 am__v_at_0 = @
 161 am__v_at_1 =
 162 SOURCES =
 163 DIST_SOURCES =
 164 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 165         ctags-recursive dvi-recursive html-recursive info-recursive \
 166         install-data-recursive install-dvi-recursive \
 167         install-exec-recursive install-html-recursive \
 168         install-info-recursive install-pdf-recursive \
 169         install-ps-recursive install-recursive installcheck-recursive \
 170         installdirs-recursive pdf-recursive ps-recursive \
 171         tags-recursive uninstall-recursive
 172 am__can_run_installinfo = \
 173   case $$AM_UPDATE_INFO_DIR in \
 174     n|no|NO) false;; \
 175     *) (install-info --version) >/dev/null 2>&1;; \
 176   esac
 177 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 178 am__vpath_adj = case $$p in \
 179     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 180     *) f=$$p;; \
 181   esac;
 182 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 183 am__install_max = 40
 184 am__nobase_strip_setup = \
 185   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 186 am__nobase_strip = \
 187   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 188 am__nobase_list = $(am__nobase_strip_setup); \
 189   for p in $$list; do echo "$$p $$p"; done | \
 190   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 191   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 192     if (++n[$$2] == $(am__install_max)) \
 193       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 194     END { for (dir in files) print dir, files[dir] }'
 195 am__base_list = \
 196   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 197   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 198 am__uninstall_files_from_dir = { \
 199   test -z "$$files" \
 200     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 201     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 202          $(am__cd) "$$dir" && rm -f $$files; }; \
 203   }
 204 am__installdirs = "$(DESTDIR)$(docdir)"
 205 DATA = $(dist_doc_DATA)
 206 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 207   distclean-recursive maintainer-clean-recursive
 208 am__recursive_targets = \
 209   $(RECURSIVE_TARGETS) \
 210   $(RECURSIVE_CLEAN_TARGETS) \
 211   $(am__extra_recursive_targets)
 212 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 213         cscope distdir dist dist-all distcheck
 214 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 215 # Read a list of newline-separated strings from the standard input,
 216 # and print each of them once, without duplicates.  Input order is
 217 # *not* preserved.
 218 am__uniquify_input = $(AWK) '\
 219   BEGIN { nonempty = 0; } \
 220   { items[$$0] = 1; nonempty = 1; } \
 221   END { if (nonempty) { for (i in items) print i; }; } \
 222 '
 223 # Make sure the list of sources is unique.  This is necessary because,
 224 # e.g., the same source file might be shared among _SOURCES variables
 225 # for different programs/libraries.
 226 am__define_uniq_tagged_files = \
 227   list='$(am__tagged_files)'; \
 228   unique=`for i in $$list; do \
 229     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 230   done | $(am__uniquify_input)`
 231 ETAGS = etags
 232 CTAGS = ctags
 233 CSCOPE = cscope
 234 DIST_SUBDIRS = $(SUBDIRS)
 235 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 236 distdir = $(PACKAGE)-$(VERSION)
 237 top_distdir = $(distdir)
 238 am__remove_distdir = \
 239   if test -d "$(distdir)"; then \
 240     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 241       && rm -rf "$(distdir)" \
 242       || { sleep 5 && rm -rf "$(distdir)"; }; \
 243   else :; fi
 244 am__post_remove_distdir = $(am__remove_distdir)
 245 am__relativize = \
 246   dir0=`pwd`; \
 247   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 248   sed_rest='s,^[^/]*/*,,'; \
 249   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 250   sed_butlast='s,/*[^/]*$$,,'; \
 251   while test -n "$$dir1"; do \
 252     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 253     if test "$$first" != "."; then \
 254       if test "$$first" = ".."; then \
 255         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 256         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 257       else \
 258         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 259         if test "$$first2" = "$$first"; then \
 260           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 261         else \
 262           dir2="../$$dir2"; \
 263         fi; \
 264         dir0="$$dir0"/"$$first"; \
 265       fi; \
 266     fi; \
 267     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 268   done; \
 269   reldir="$$dir2"
 270 DIST_ARCHIVES = $(distdir).tar.gz
 271 GZIP_ENV = --best
 272 DIST_TARGETS = dist-gzip
 273 distuninstallcheck_listfiles = find . -type f -print
 274 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 275   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 276 distcleancheck_listfiles = find . -type f -print
 277 ACLOCAL = @ACLOCAL@
 278 AMTAR = @AMTAR@
 279 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 280 AR = @AR@
 281 AUTOCONF = @AUTOCONF@
 282 AUTOHEADER = @AUTOHEADER@
 283 AUTOMAKE = @AUTOMAKE@
 284 AWK = @AWK@
 285 CC = @CC@
 286 CCDEPMODE = @CCDEPMODE@
 287 CFLAGS = @CFLAGS@
 288 CMP = @CMP@
 289 CPP = @CPP@
 290 CPPFLAGS = @CPPFLAGS@
 291 CXX = @CXX@
 292 CXXCPP = @CXXCPP@
 293 CXXDEPMODE = @CXXDEPMODE@
 294 CXXFLAGS = @CXXFLAGS@
 295 CYGPATH_W = @CYGPATH_W@
 296 DEFS = @DEFS@
 297 DEPDIR = @DEPDIR@
 298 DLLTOOL = @DLLTOOL@
 299 DOT = @DOT@
 300 DOXYGEN = @DOXYGEN@
 301 DOXYGEN_USE_DOT = @DOXYGEN_USE_DOT@
 302 DSYMUTIL = @DSYMUTIL@
 303 DUMPBIN = @DUMPBIN@
 304 ECHO_C = @ECHO_C@
 305 ECHO_N = @ECHO_N@
 306 ECHO_T = @ECHO_T@
 307 EGREP = @EGREP@
 308 EXEEXT = @EXEEXT@
 309 FGREP = @FGREP@
 310 GENHTML = @GENHTML@
 311 GREP = @GREP@
 312 INSTALL = @INSTALL@
 313 INSTALL_DATA = @INSTALL_DATA@
 314 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 315 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 316 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 317 LCOV = @LCOV@
 318 LD = @LD@
 319 LDFLAGS = @LDFLAGS@
 320 LIBNLIO_VERSION_AGE = @LIBNLIO_VERSION_AGE@
 321 LIBNLIO_VERSION_CURRENT = @LIBNLIO_VERSION_CURRENT@
 322 LIBNLIO_VERSION_INFO = @LIBNLIO_VERSION_INFO@
 323 LIBNLIO_VERSION_REVISION = @LIBNLIO_VERSION_REVISION@
 324 LIBOBJS = @LIBOBJS@
 325 LIBS = @LIBS@
 326 LIBTOOL = @LIBTOOL@
 327 LIPO = @LIPO@
 328 LN_S = @LN_S@
 329 LTLIBOBJS = @LTLIBOBJS@
 330 MAINT = @MAINT@
 331 MAKEINFO = @MAKEINFO@
 332 MANIFEST_TOOL = @MANIFEST_TOOL@
 333 MKDIR_P = @MKDIR_P@
 334 NLUNIT_TEST_CPPFLAGS = @NLUNIT_TEST_CPPFLAGS@
 335 NLUNIT_TEST_FOREIGN_SUBDIR_DEPENDENCY = @NLUNIT_TEST_FOREIGN_SUBDIR_DEPENDENCY@
 336 NLUNIT_TEST_LDFLAGS = @NLUNIT_TEST_LDFLAGS@
 337 NLUNIT_TEST_LIBS = @NLUNIT_TEST_LIBS@
 338 NLUNIT_TEST_SUBDIRS = @NLUNIT_TEST_SUBDIRS@
 339 NM = @NM@
 340 NMEDIT = @NMEDIT@
 341 OBJCOPY = @OBJCOPY@
 342 OBJDUMP = @OBJDUMP@
 343 OBJEXT = @OBJEXT@
 344 OTOOL = @OTOOL@
 345 OTOOL64 = @OTOOL64@
 346 PACKAGE = @PACKAGE@
 347 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 348 PACKAGE_NAME = @PACKAGE_NAME@
 349 PACKAGE_STRING = @PACKAGE_STRING@
 350 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 351 PACKAGE_URL = @PACKAGE_URL@
 352 PACKAGE_VERSION = $(NLIO_VERSION)
 353 PATH_SEPARATOR = @PATH_SEPARATOR@
 354 PERL = @PERL@
 355 PKG_CONFIG = @PKG_CONFIG@
 356 RANLIB = @RANLIB@
 357 SED = @SED@
 358 SET_MAKE = @SET_MAKE@
 359 SHELL = @SHELL@
 360 STRIP = @STRIP@
 361 VERSION = $(PACKAGE_VERSION)
 362 abs_builddir = @abs_builddir@
 363 abs_srcdir = @abs_srcdir@
 364 abs_top_builddir = @abs_top_builddir@
 365 abs_top_nlbuild_autotools_dir = @abs_top_nlbuild_autotools_dir@
 366 abs_top_srcdir = @abs_top_srcdir@
 367 ac_ct_AR = @ac_ct_AR@
 368 ac_ct_CC = @ac_ct_CC@
 369 ac_ct_CXX = @ac_ct_CXX@
 370 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 371 am__include = @am__include@
 372 am__leading_dot = @am__leading_dot@
 373 am__quote = @am__quote@
 374 am__tar = @am__tar@
 375 am__untar = @am__untar@
 376 bindir = @bindir@
 377 build = @build@
 378 build_alias = @build_alias@
 379 build_cpu = @build_cpu@
 380 build_os = @build_os@
 381 build_vendor = @build_vendor@
 382 builddir = @builddir@
 383 datadir = @datadir@
 384 datarootdir = @datarootdir@
 385 docdir = @docdir@
 386 dvidir = @dvidir@
 387 exec_prefix = @exec_prefix@
 388 host = @host@
 389 host_alias = @host_alias@
 390 host_cpu = @host_cpu@
 391 host_os = @host_os@
 392 host_vendor = @host_vendor@
 393 htmldir = @htmldir@
 394 includedir = @includedir@
 395 infodir = @infodir@
 396 install_sh = @install_sh@
 397 libdir = @libdir@
 398 libexecdir = @libexecdir@
 399 localedir = @localedir@
 400 localstatedir = @localstatedir@
 401 mandir = @mandir@
 402 mkdir_p = @mkdir_p@
 403 nl_filtered_build = @nl_filtered_build@
 404 nl_filtered_build_cpu = @nl_filtered_build_cpu@
 405 nl_filtered_build_os = @nl_filtered_build_os@
 406 nl_filtered_build_vendor = @nl_filtered_build_vendor@
 407 nl_filtered_host = @nl_filtered_host@
 408 nl_filtered_host_cpu = @nl_filtered_host_cpu@
 409 nl_filtered_host_os = @nl_filtered_host_os@
 410 nl_filtered_host_vendor = @nl_filtered_host_vendor@
 411 nl_filtered_target = @nl_filtered_target@
 412 nl_filtered_target_cpu = @nl_filtered_target_cpu@
 413 nl_filtered_target_os = @nl_filtered_target_os@
 414 nl_filtered_target_vendor = @nl_filtered_target_vendor@
 415 nlbuild_autotools_stem = @nlbuild_autotools_stem@
 416 oldincludedir = @oldincludedir@
 417 pdfdir = @pdfdir@
 418 prefix = @prefix@
 419 program_transform_name = @program_transform_name@
 420 psdir = @psdir@
 421 sbindir = @sbindir@
 422 sharedstatedir = @sharedstatedir@
 423 srcdir = @srcdir@
 424 subdirs = @subdirs@
 425 sysconfdir = @sysconfdir@
 426 target = @target@
 427 target_alias = @target_alias@
 428 target_cpu = @target_cpu@
 429 target_os = @target_os@
 430 target_vendor = @target_vendor@
 431 top_build_prefix = @top_build_prefix@
 432 top_builddir = @top_builddir@
 433 top_srcdir = @top_srcdir@
 434 AM_MAKEFLAGS = --no-print-directory
 435 SUBDIRS = \
 436     third_party                             \
 437     include                                 \
 438     tests                                   \
 439     doc                                     \
 440     $(NULL)
 441
 442 EXTRA_DIST = \
 443     CHANGES                                 \
 444     CONTRIBUTING.md                         \
 445     LICENSE                                 \
 446     Makefile-bootstrap                      \
 447     README.md                               \
 448     .default-version                        \
 449     bootstrap                               \
 450     bootstrap-configure                     \
 451     $(srcdir)/third_party/nlbuild-autotools \
 452     repos.conf                              \
 453     $(NULL)
 454
 455 BUILT_SOURCES = \
 456     .local-version                          \
 457     $(NULL)
 458
 459 dist_doc_DATA = \
 460     $(NULL)
 461
 462 DISTCLEANFILES = \
 463     .local-version                          \
 464     $(NULL)
 465
 466
 467 #
 468 # Package version files:
 469 #
 470 # .default-version - The default package version. This file is ALWAYS checked
 471 #                    in and should always represent the current baseline
 472 #                    version of the package.
 473 #
 474 # .dist-version    - The distributed package version. This file is NEVER
 475 #                    checked in within the upstream repository, is auto-
 476 #                    generated, and is only found in the package distribution.
 477 #
 478 # .local-version   - The current source code controlled package version. This
 479 #                    file is NEVER checked in within the upstream repository,
 480 #                    is auto-generated, and can always be found in both the
 481 #                    build tree and distribution.
 482 #
 483 # When present, the .local-version file is preferred first, the
 484 # .dist-version second, and the .default-version last.
 485 #
 486 VERSION_FILE := $(if $(wildcard $(builddir)/.local-version),$(builddir)/.local-version,$(if $(wildcard $(srcdir)/.dist-version),$(srcdir)/.dist-version,$(srcdir)/.default-version))
 487
 488 #
 489 # When we run 'distcheck' and --with-nlunit_test defaults to 'internal',
 490 # the nlbuild-autotools infrastructure will attempt to create git paths
 491 # to manage the nlunit-test repo. Two directories need to be writable
 492 # to facilitate this.
 493 #
 494 DISTCHECK_CONFIGURE_FLAGS = `chmod u+w .. ../third_party`
 495 all: $(BUILT_SOURCES)
 496         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 497
 498 .SUFFIXES:
 499 am--refresh: Makefile
 500         @:
 501 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 502         @for dep in $?; do \
 503           case '$(am__configure_deps)' in \
 504             *$$dep*) \
 505               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 506               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 507                 && exit 0; \
 508               exit 1;; \
 509           esac; \
 510         done; \
 511         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 512         $(am__cd) $(top_srcdir) && \
 513           $(AUTOMAKE) --foreign Makefile
 514 .PRECIOUS: Makefile
 515 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 516         @case '$?' in \
 517           *config.status*) \
 518             echo ' $(SHELL) ./config.status'; \
 519             $(SHELL) ./config.status;; \
 520           *) \
 521             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 522             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 523         esac;
 524
 525 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 526         $(SHELL) ./config.status --recheck
 527
 528 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 529         $(am__cd) $(srcdir) && $(AUTOCONF)
 530 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 531         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 532 $(am__aclocal_m4_deps):
 533
 534 mostlyclean-libtool:
 535         -rm -f *.lo
 536
 537 clean-libtool:
 538         -rm -rf .libs _libs
 539
 540 distclean-libtool:
 541         -rm -f libtool config.lt
 542 install-dist_docDATA: $(dist_doc_DATA)
 543         @$(NORMAL_INSTALL)
 544         @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
 545         if test -n "$$list"; then \
 546           echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
 547           $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
 548         fi; \
 549         for p in $$list; do \
 550           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 551           echo "$$d$$p"; \
 552         done | $(am__base_list) | \
 553         while read files; do \
 554           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
 555           $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
 556         done
 557
 558 uninstall-dist_docDATA:
 559         @$(NORMAL_UNINSTALL)
 560         @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
 561         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 562         dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
 563
 564 # This directory's subdirectories are mostly independent; you can cd
 565 # into them and run 'make' without going through this Makefile.
 566 # To change the values of 'make' variables: instead of editing Makefiles,
 567 # (1) if the variable is set in 'config.status', edit 'config.status'
 568 #     (which will cause the Makefiles to be regenerated when you run 'make');
 569 # (2) otherwise, pass the desired values on the 'make' command line.
 570 $(am__recursive_targets):
 571         @fail=; \
 572         if $(am__make_keepgoing); then \
 573           failcom='fail=yes'; \
 574         else \
 575           failcom='exit 1'; \
 576         fi; \
 577         dot_seen=no; \
 578         target=`echo $@ | sed s/-recursive//`; \
 579         case "$@" in \
 580           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 581           *) list='$(SUBDIRS)' ;; \
 582         esac; \
 583         for subdir in $$list; do \
 584           echo "Making $$target in $$subdir"; \
 585           if test "$$subdir" = "."; then \
 586             dot_seen=yes; \
 587             local_target="$$target-am"; \
 588           else \
 589             local_target="$$target"; \
 590           fi; \
 591           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 592           || eval $$failcom; \
 593         done; \
 594         if test "$$dot_seen" = "no"; then \
 595           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 596         fi; test -z "$$fail"
 597
 598 ID: $(am__tagged_files)
 599         $(am__define_uniq_tagged_files); mkid -fID $$unique
 600 tags: tags-recursive
 601 TAGS: tags
 602
 603 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 604         set x; \
 605         here=`pwd`; \
 606         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 607           include_option=--etags-include; \
 608           empty_fix=.; \
 609         else \
 610           include_option=--include; \
 611           empty_fix=; \
 612         fi; \
 613         list='$(SUBDIRS)'; for subdir in $$list; do \
 614           if test "$$subdir" = .; then :; else \
 615             test ! -f $$subdir/TAGS || \
 616               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 617           fi; \
 618         done; \
 619         $(am__define_uniq_tagged_files); \
 620         shift; \
 621         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 622           test -n "$$unique" || unique=$$empty_fix; \
 623           if test $$# -gt 0; then \
 624             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 625               "$$@" $$unique; \
 626           else \
 627             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 628               $$unique; \
 629           fi; \
 630         fi
 631 ctags: ctags-recursive
 632
 633 CTAGS: ctags
 634 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 635         $(am__define_uniq_tagged_files); \
 636         test -z "$(CTAGS_ARGS)$$unique" \
 637           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 638              $$unique
 639
 640 GTAGS:
 641         here=`$(am__cd) $(top_builddir) && pwd` \
 642           && $(am__cd) $(top_srcdir) \
 643           && gtags -i $(GTAGS_ARGS) "$$here"
 644 cscope: cscope.files
 645         test ! -s cscope.files \
 646           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 647 clean-cscope:
 648         -rm -f cscope.files
 649 cscope.files: clean-cscope cscopelist
 650 cscopelist: cscopelist-recursive
 651
 652 cscopelist-am: $(am__tagged_files)
 653         list='$(am__tagged_files)'; \
 654         case "$(srcdir)" in \
 655           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 656           *) sdir=$(subdir)/$(srcdir) ;; \
 657         esac; \
 658         for i in $$list; do \
 659           if test -f "$$i"; then \
 660             echo "$(subdir)/$$i"; \
 661           else \
 662             echo "$$sdir/$$i"; \
 663           fi; \
 664         done >> $(top_builddir)/cscope.files
 665
 666 distclean-tags:
 667         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 668         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 669
 670 distdir: $(DISTFILES)
 671         $(am__remove_distdir)
 672         test -d "$(distdir)" || mkdir "$(distdir)"
 673         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 674         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 675         list='$(DISTFILES)'; \
 676           dist_files=`for file in $$list; do echo $$file; done | \
 677           sed -e "s|^$$srcdirstrip/||;t" \
 678               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 679         case $$dist_files in \
 680           */*) $(MKDIR_P) `echo "$$dist_files" | \
 681                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 682                            sort -u` ;; \
 683         esac; \
 684         for file in $$dist_files; do \
 685           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 686           if test -d $$d/$$file; then \
 687             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 688             if test -d "$(distdir)/$$file"; then \
 689               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 690             fi; \
 691             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 692               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 693               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 694             fi; \
 695             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 696           else \
 697             test -f "$(distdir)/$$file" \
 698             || cp -p $$d/$$file "$(distdir)/$$file" \
 699             || exit 1; \
 700           fi; \
 701         done
 702         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 703           if test "$$subdir" = .; then :; else \
 704             $(am__make_dryrun) \
 705               || test -d "$(distdir)/$$subdir" \
 706               || $(MKDIR_P) "$(distdir)/$$subdir" \
 707               || exit 1; \
 708             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 709             $(am__relativize); \
 710             new_distdir=$$reldir; \
 711             dir1=$$subdir; dir2="$(top_distdir)"; \
 712             $(am__relativize); \
 713             new_top_distdir=$$reldir; \
 714             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 715             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 716             ($(am__cd) $$subdir && \
 717               $(MAKE) $(AM_MAKEFLAGS) \
 718                 top_distdir="$$new_top_distdir" \
 719                 distdir="$$new_distdir" \
 720                 am__remove_distdir=: \
 721                 am__skip_length_check=: \
 722                 am__skip_mode_fix=: \
 723                 distdir) \
 724               || exit 1; \
 725           fi; \
 726         done
 727         $(MAKE) $(AM_MAKEFLAGS) \
 728           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 729           dist-hook
 730         -test -n "$(am__skip_mode_fix)" \
 731         || find "$(distdir)" -type d ! -perm -755 \
 732                 -exec chmod u+rwx,go+rx {} \; -o \
 733           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 734           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 735           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 736         || chmod -R a+r "$(distdir)"
 737 dist-gzip: distdir
 738         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 739         $(am__post_remove_distdir)
 740
 741 dist-bzip2: distdir
 742         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 743         $(am__post_remove_distdir)
 744
 745 dist-lzip: distdir
 746         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 747         $(am__post_remove_distdir)
 748
 749 dist-xz: distdir
 750         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 751         $(am__post_remove_distdir)
 752
 753 dist-tarZ: distdir
 754         @echo WARNING: "Support for shar distribution archives is" \
 755                        "deprecated." >&2
 756         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 757         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 758         $(am__post_remove_distdir)
 759
 760 dist-shar: distdir
 761         @echo WARNING: "Support for distribution archives compressed with" \
 762                        "legacy program 'compress' is deprecated." >&2
 763         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 764         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 765         $(am__post_remove_distdir)
 766
 767 dist-zip: distdir
 768         -rm -f $(distdir).zip
 769         zip -rq $(distdir).zip $(distdir)
 770         $(am__post_remove_distdir)
 771
 772 dist dist-all:
 773         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 774         $(am__post_remove_distdir)
 775
 776 # This target untars the dist file and tries a VPATH configuration.  Then
 777 # it guarantees that the distribution is self-contained by making another
 778 # tarfile.
 779 distcheck: dist
 780         case '$(DIST_ARCHIVES)' in \
 781         *.tar.gz*) \
 782           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 783         *.tar.bz2*) \
 784           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 785         *.tar.lz*) \
 786           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 787         *.tar.xz*) \
 788           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 789         *.tar.Z*) \
 790           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 791         *.shar.gz*) \
 792           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 793         *.zip*) \
 794           unzip $(distdir).zip ;;\
 795         esac
 796         chmod -R a-w $(distdir)
 797         chmod u+w $(distdir)
 798         mkdir $(distdir)/_build $(distdir)/_inst
 799         chmod a-w $(distdir)
 800         test -d $(distdir)/_build || exit 0; \
 801         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 802           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 803           && am__cwd=`pwd` \
 804           && $(am__cd) $(distdir)/_build \
 805           && ../configure \
 806             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 807             $(DISTCHECK_CONFIGURE_FLAGS) \
 808             --srcdir=.. --prefix="$$dc_install_base" \
 809           && $(MAKE) $(AM_MAKEFLAGS) \
 810           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 811           && $(MAKE) $(AM_MAKEFLAGS) check \
 812           && $(MAKE) $(AM_MAKEFLAGS) install \
 813           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 814           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 815           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 816                 distuninstallcheck \
 817           && chmod -R a-w "$$dc_install_base" \
 818           && ({ \
 819                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 820                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 821                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 822                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 823                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 824               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 825           && rm -rf "$$dc_destdir" \
 826           && $(MAKE) $(AM_MAKEFLAGS) dist \
 827           && rm -rf $(DIST_ARCHIVES) \
 828           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 829           && cd "$$am__cwd" \
 830           || exit 1
 831         $(am__post_remove_distdir)
 832         @(echo "$(distdir) archives ready for distribution: "; \
 833           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 834           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 835 distuninstallcheck:
 836         @test -n '$(distuninstallcheck_dir)' || { \
 837           echo 'ERROR: trying to run $@ with an empty' \
 838                '$$(distuninstallcheck_dir)' >&2; \
 839           exit 1; \
 840         }; \
 841         $(am__cd) '$(distuninstallcheck_dir)' || { \
 842           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 843           exit 1; \
 844         }; \
 845         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 846            || { echo "ERROR: files left after uninstall:" ; \
 847                 if test -n "$(DESTDIR)"; then \
 848                   echo "  (check DESTDIR support)"; \
 849                 fi ; \
 850                 $(distuninstallcheck_listfiles) ; \
 851                 exit 1; } >&2
 852 distcleancheck: distclean
 853         @if test '$(srcdir)' = . ; then \
 854           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 855           exit 1 ; \
 856         fi
 857         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 858           || { echo "ERROR: files left in build directory after distclean:" ; \
 859                $(distcleancheck_listfiles) ; \
 860                exit 1; } >&2
 861 check-am: all-am
 862 check: $(BUILT_SOURCES)
 863         $(MAKE) $(AM_MAKEFLAGS) check-recursive
 864 all-am: Makefile $(DATA)
 865 installdirs: installdirs-recursive
 866 installdirs-am:
 867         for dir in "$(DESTDIR)$(docdir)"; do \
 868           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 869         done
 870 install: $(BUILT_SOURCES)
 871         $(MAKE) $(AM_MAKEFLAGS) install-recursive
 872 install-exec: install-exec-recursive
 873 install-data: install-data-recursive
 874 uninstall: uninstall-recursive
 875
 876 install-am: all-am
 877         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 878
 879 installcheck: installcheck-recursive
 880 install-strip:
 881         if test -z '$(STRIP)'; then \
 882           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 883             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 884               install; \
 885         else \
 886           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 887             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 888             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 889         fi
 890 mostlyclean-generic:
 891
 892 clean-generic:
 893
 894 distclean-generic:
 895         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 896         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 897         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 898
 899 maintainer-clean-generic:
 900         @echo "This command is intended for maintainers to use"
 901         @echo "it deletes files that may require special tools to rebuild."
 902         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
 903 clean: clean-recursive
 904
 905 clean-am: clean-generic clean-libtool mostlyclean-am
 906
 907 distclean: distclean-recursive
 908         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 909         -rm -f Makefile
 910 distclean-am: clean-am distclean-generic distclean-libtool \
 911         distclean-local distclean-tags
 912
 913 dvi: dvi-recursive
 914
 915 dvi-am:
 916
 917 html: html-recursive
 918
 919 html-am:
 920
 921 info: info-recursive
 922
 923 info-am:
 924
 925 install-data-am: install-dist_docDATA
 926
 927 install-dvi: install-dvi-recursive
 928
 929 install-dvi-am:
 930
 931 install-exec-am:
 932
 933 install-html: install-html-recursive
 934
 935 install-html-am:
 936
 937 install-info: install-info-recursive
 938
 939 install-info-am:
 940
 941 install-man:
 942
 943 install-pdf: install-pdf-recursive
 944
 945 install-pdf-am:
 946
 947 install-ps: install-ps-recursive
 948
 949 install-ps-am:
 950
 951 installcheck-am:
 952
 953 maintainer-clean: maintainer-clean-recursive
 954         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 955         -rm -rf $(top_srcdir)/autom4te.cache
 956         -rm -f Makefile
 957 maintainer-clean-am: distclean-am maintainer-clean-generic
 958
 959 mostlyclean: mostlyclean-recursive
 960
 961 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 962
 963 pdf: pdf-recursive
 964
 965 pdf-am:
 966
 967 ps: ps-recursive
 968
 969 ps-am:
 970
 971 uninstall-am: uninstall-dist_docDATA
 972
 973 .MAKE: $(am__recursive_targets) all check install install-am \
 974         install-strip
 975
 976 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 977         am--refresh check check-am clean clean-cscope clean-generic \
 978         clean-libtool cscope cscopelist-am ctags ctags-am dist \
 979         dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
 980         dist-tarZ dist-xz dist-zip distcheck distclean \
 981         distclean-generic distclean-libtool distclean-local \
 982         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 983         dvi-am html html-am info info-am install install-am \
 984         install-data install-data-am install-dist_docDATA install-dvi \
 985         install-dvi-am install-exec install-exec-am install-html \
 986         install-html-am install-info install-info-am install-man \
 987         install-pdf install-pdf-am install-ps install-ps-am \
 988         install-strip installcheck installcheck-am installdirs \
 989         installdirs-am maintainer-clean maintainer-clean-generic \
 990         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 991         ps ps-am tags tags-am uninstall uninstall-am \
 992         uninstall-dist_docDATA
 993
 994
 995 include $(abs_top_nlbuild_autotools_dir)/automake/pre.am
 996
 997 #
 998 # Override autotool's default notion of the package version variables.
 999 # This ensures that when we create a source distribution that the
1000 # version is always the current version, not the version when the
1001 # package was bootstrapped.
1002 #
1003
1004 NLIO_VERSION                      ?= $(shell cat $(VERSION_FILE) 2> /dev/null)
1005
1006 #
1007 # check-file-.local-version
1008 #
1009 # Speculatively regenerate .local-version and check to see if it needs
1010 # to be updated.
1011 #
1012 # If NLIO_VERSION has been supplied anywhere other than in this file
1013 # (which is implicitly the contents of .local-version), then use that;
1014 # otherwise, attempt to generate it from the SCM system.
1015 #
1016 # This is called from $(call check-file,.local-version).
1017 #
1018 define check-file-.local-version
1019 if [ "$(origin NLIO_VERSION)" != "file" ]; then        \
1020     echo "$(NLIO_VERSION)" > "$(2)";                   \
1021 else                                                   \
1022     $(abs_top_nlbuild_autotools_dir)/scripts/mkversion \
1023         -b "$(NLIO_VERSION)" "$(top_srcdir)"           \
1024         > "$(2)";                                      \
1025 fi
1026 endef
1027
1028 #
1029 # check-file-.dist-version
1030 #
1031 # Speculatively regenerate .dist-version and check to see if it needs
1032 # to be updated.
1033 #
1034 # This is called from $(call check-file,.dist-version).
1035 #
1036 define check-file-.dist-version
1037 cat "$(1)" > "$(2)"
1038 endef
1039
1040 #
1041 # A convenience target to allow package users to easily rerun the
1042 # package configuration according to the current configuration.
1043 #
1044 .PHONY: reconfigure
1045 reconfigure: $(builddir)/config.status
1046         $(AM_V_at)$(<) --recheck
1047
1048 #
1049 # Version file regeneration rules.
1050 #
1051 .PHONY: force
1052
1053 $(builddir)/.local-version: $(srcdir)/.default-version force
1054
1055 $(distdir)/.dist-version: $(builddir)/.local-version force
1056
1057 $(distdir)/.dist-version $(builddir)/.local-version:
1058         $(call check-file,$(@F))
1059
1060 dist distcheck: $(BUILT_SOURCES)
1061
1062 dist-hook: $(distdir)/.dist-version
1063
1064 #
1065 # Ensure any locally synchronized repositories defined by 'repos.conf'
1066 # are cleaned up.
1067 #
1068 distclean-local:
1069         $(MAKE) -C $(srcdir) -f Makefile-bootstrap clean-repos
1070
1071 #
1072 # Top-level convenience target for making a documentation-only
1073 # distribution whose results appear at the top level of the build tree
1074 # in the same fashion that the distribution would be for 'make dist'.
1075 #
1076
1077 .PHONY: docdist
1078 docdist: $(BUILT_SOURCES)
1079         $(MAKE) -C doc docdistdir=$(abs_builddir) $(@)
1080
1081 include $(abs_top_nlbuild_autotools_dir)/automake/post.am
1082
1083 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1084 # Otherwise a system limit (for SysV at least) may be exceeded.
1085 .NOEXPORT: